Base cation depletion, eutrophication and acidification of species-rich grasslands in response to long-term simulated nitrogen deposition

Pollutant nitrogen deposition effects on soil and foliar element concentrations were investigated in acidic and limestone grasslands, located in one of the most nitrogen and acid rain polluted regions of the UK, using plots treated for 8-10years with 35-140kg Nha(-2)y(-1) as NH(4)NO(3). Historic data suggests both grasslands have acidified over the past 50years. Nitrogen deposition treatments caused the grassland soils to lose 23-35% of their total available bases (Ca, Mg, K, and Na) and they became acidified by 0.2-0.4 pH units. Aluminium, iron and manganese were mobilised and taken up by limestone grassland forbs and were translocated down the acid grassland soil. Mineral nitrogen availability increased in both grasslands and many species showed foliar N enrichment. This study provides the first definitive evidence that nitrogen deposition depletes base cations from grassland soils. The resulting acidification, metal mobilisation and eutrophication are implicated in driving floristic changes.     

Differences in herbicide adsorption on soil using several soil ph modification techniques

Abstract

Effects of soil pH on weak acid and weak base herbicide adsorption by soil are often determined by modifying soil pH in the laboratory. Modification of soil pH with acidic or basic amendments such as HCl or NaOH can cause changes in the soil‐solution system that may affect pesticide adsorption. The partition coefficients (K_d) for atrazine and dicamba by Waukegan, Piano, and Walla Walla silt loam soils stabilized in the field at different pH levels were compared to the K_d obtained when the soil pH was adjusted with acidic or basic amendments before herbicide addition. NaOH addition to raise soil pH generally increased the soluble soil organic carbon (SSOC) concentration in solution compared to field soils at the same pH and to soil treated with Ca(OH)₂. NaOH decreased the soil solution ionic strength slightly. Acidifying soils increased the soil solution ionic strength, when compared to field soils at the same pH and had no effect on SSOC concentration. Dicamba adsorption to soil was minimal (K_d < 0.22) and not influenced by soil pH in the range of 4.1 to 6.0; adsorption by laboratory amended soils in some cases underestimated adsorption compared to nonamended soils. Atrazine adsorption increased with decreased pH in all soils, and was overestimated slightly by several laboratory treatments to reduce pH compared to adsorption by field soils. Treatments to raise the pH did not affect atrazine adsorption. Overall, herbicide adsorption differences due to pH modification were small (<30%), and were not affected by soil solution ionic strength, saturating cation, or SSOC concentration in solution.     

Biodegradation of wastewater nitrogen compounds in fractures: laboratory tests and field observations

Throughout several coastal regions in the Mediterranean where rainfalls rarely exceed 650 mm per year municipal treated wastewater can be conveniently reused for soil irrigation. Where the coastal aquifer supplies large populations with freshwater in such area, an assessment of ground water quality around spreading sites is needed. In this study, the efficacy of natural filtration on nitrogen degradation in wastewater spreads on the soil covering the Salento (Southern Italy) fractured limestone was quantified by using laboratory tests and field measurements. In the laboratory, effluent from municipal wastewater treatment plants was filtered through a package of fractures made by several slabs of limestone. An analysis of wastewater constituent concentrations over time allowed the decay rates and constants for nitrogen transformation during natural filtration to be estimated in both aerated and non-aerated (i.e., saturated) soil fractures. A simulation code, based on biodegradation decay constants defined in the laboratory experiments, was then used to quantify the total inorganic nitrogen removal from wastewater injected in an aquifer in the Salento region (Nardò). Here the water sampled in two monitoring wells at 320 m and 500 m from the wastewater injection site and downgradient with respect to groundwater flow was used to verify the laboratory nitrification and denitrification rates.     

Effects of alkaline and bioorganic amendments on cadmium,lead, zinc,and nutrient accumulation in brown rice and grain yield in acidic paddy fields contaminated with a mixture of heavy metals

Paddy soils and rice (Oryza sativa L.) contaminated by mixed heavy metals have given rise to great concern. Field experiments were conducted over two cultivation seasons to study the effects of steel slag (SS), fly ash (FA), limestone (LS), bioorganic fertilizer (BF), and the combination of SS and BF (SSBF) on rice grain yield, Cd, Pb, and Zn and nutrient accumulation in brown rice, bioavailability of Cd, Pb, and Zn in soil as well as soil properties (pH and catalase), at two acidic paddy fields contaminated with mixed heavy metals (Cd, Pb, and Zn). Compared to the controls, SS, LS, and SSBF at both low and high additions significantly elevated soil pH over both cultivation seasons. The high treatments of SS and SSBF markedly increased grain yields, the accumulation of P and Ca in brown rice and soil catalase activities in the first cultivation season. The most striking result was from SS application (4.0 t ha^?1) that consistently and significantly reduced the soil bioavailability of Cd, Pb, and Zn by 38.5–91.2 % and the concentrations of Cd and Pb in brown rice by 20.9–50.9 % in the two soils over both cultivation seasons. LS addition (4.0 t ha^?1) also markedly reduced the bioavailable Cd, Pb, and Zn in soil and the Cd concentrations in brown rice. BF remobilized soil Cd and Pb leading to more accumulation of these metals in brown rice. The results showed that steel slag was most effective in the remediation of acidic paddy soils contaminated with mixed heavy metals.     

Mitigation of low stream pH and its effects on salmonids

Crushed limestone (200 tonnes) was spread in bars on the bed of an acidic brook (mean pH 5.0) in Nova Scotia, Canada. A seasonally variable but significant increase in pH of running water resulted, and a longitudinal pH gradient over the limed section extended to the mouth of the brook. The effectiveness persisted after 3 years, during which pH downstream of the limestone increased an average of 0.4 pH units (range < 0.1-1.3 pH units) along with significantly increased Ca, Mg and acid neutralizing capacity. Total and exchangeable Al were not altered by the limestone and non-exchangeable forms dominated. The interstitial water was nearly neutral (mean pH 7.1) in limestone beds but it was acidic (mean pH 5.4) in gravel beds of the control section upstream. Spawning Atlantic salmon (Salmo salar) dug three times more redds in gravel of the limed section than in the control. Salmon fry survived and they were significantly more abundant in the limed section than in the control. The density of juvenile salmon increased over time, indicating a recovery of the population. The density of brook trout (Salvelinus fontinalis) also increased and trout fry were usually more abundant in the limed section than in the control. The observed benefits for salmonids suggest that small-scale application of limestone to stream beds and spawning sites can be used to mitigate the effects of low stream pH.     

铁屑法处理活性染料废水的实验研究

研究了反应时间、染料浓度、进水pH以及不同的废铸铁屑投加量的条件下，废铸铁屑内电解法处理模拟印染废水的脱色能力。并采用铁屑滤床强化厌氧一好氧膜生物反应器（A／OMBR）处理含活性染料的模拟废水。研究结果表明，铁屑对模拟印染废水的最佳脱色时间为12min，酸性条件下铁屑的脱色率优于碱性条件．随铁屑投加量的增加，系统对印染废水的脱色率提高，铁屑滤床强化A／OMBR处理可以提高组合工艺出水色度和COD的去除率。     

Processes controlling metal transport and retention as metal-contaminated groundwaters efflux through estuarine sediments

Factors affecting the transport and retention of Cd, Cr, Cu, Ni, Pb and Zn in acidic groundwaters as they pass through estuarine sediments were investigated using column experiments. Acidic groundwaters caused the rapid dissolution of iron sulfide (AVS) and other iron and manganese phases from sediments that are important for metal binding and buffering. Metal breakthrough to overlying water occurred in the order of Ni>Zn>Cd>Cu>Cr/Pb. Metal transport increased as the sediment permeability increased, reflecting the low resistance to flow caused by larger sand-sized particles and the decreased abundance of metal adsorption sites on these materials. Metal mobility increased as the groundwater pH decreased, as flow rate or metal concentrations increased, and as the exposure duration increased. Groundwater Cr and Pb were promptly attenuated by the sediments, the mobility of Cu was low and decreased rapidly as sediment pH increased above 4.5, while Cd, Ni and Zn were the most easily transported to the surface sediments and released to the overlying waters. For groundwaters of pH 3, metal migration velocities through sandy sediments were generally 0.5-2% (Cr, Pb), 1-6% (Cu) and 4-13% (Cd, Ni, Zn) of the total groundwater velocity (9-700 m/yr). The oxidative precipitation of Fe(II) and Mn(II) in the groundwaters did not affect metal mobility through the sediments. The results indicated that the efflux of acidic and metal-contaminated groundwater through estuarine sediments would affect organisms resident in sandy sediments more greatly than organisms resident in fine-grained, silty, sediments.     

Effect of solution pH on SO2, NO(x), and Hg removal from simulated coal combustion flue gas in an oxidant-enhanced wet scrubber

This paper presents a study on the simultaneous removal of SO2, NO(x) and Hg (both Hg0 and Hg2+) from a simulated flue gas by oxidant injection in a bench-simulated wet limestone scrubber for a wide range of slurry pH. The slurry pH strongly influenced the chemical mechanism in the scrubber and, therefore, affected pollutant removal. This paper also examines the potential ClO2(gas) reemission from a developed multipollutant scrubber at different slurry pHs. To better understand the chemical mechanisms at each slurry pH and to apply a mass balance to the process, detailed product ion analyses were performed for all experiments. Ion analysis covered three different chlorine species (chlorite, chloride, chlorate), sulfate, nitrite and nitrate. Different NO(x) removal efficiencies and mechanisms were found in acidic and alkaline pHs in the multipollutant scrubber. The acidic solution was favorable for NO and Hg0 oxidation, but increasing the slurry pH above 7.0 was disadvantageous for NO and Hg oxidation/removal. However the rate of NO(x) absorption (by percentage) was higher for the alkaline solution.     

方解石对水中磷的去除效果研究

以60~100目天然方解石为实验材料,通过对不同浓度磷的去除效果实验和动态实验研究了其对磷的去除性能,并研究不同pH值下方解石对磷的去除效果。对不同pH值下方解石对800 mg/L磷的去除效果研究结果表明,pH对去除效果影响较大,在初始pH值为4.9(平衡pH值为6.4)时去除率最高,对磷的去除率达到31%;对pH范围4.5~4.8内不同浓度的磷的去除效果实验表明,方解石对高浓度的磷去除效果较好,对100 mg/L的磷去除率为20%,对1 600 mg/L的磷去除率达到49%。在酸性条件下,方解石对磷的去除机理为Ca2+与HPO24-的化学沉淀过程。动态实验表明,填充高度为25.4 cm及填充直径为10 cm时,方解石对流速为66.85 mL/min,浓度为100 mg/L磷的去除效果较差,5 min时出水去除率为64%,再生后对磷的去除效果较好,前10 min去除率在90%以上,理论最大去除量提高了53%。     

Corrosion control when using passively treated abandoned mine drainage as alternative makeup water for cooling systems

Passively treated abandoned mine drainage (AMD) is a promising alternative to fresh water as power plant cooling water system makeup water in mining regions where such water is abundant. Passive treatment and reuse of AMD can avoid the contamination of surface water caused by discharge of abandoned mine water, which typically is acidic and contains high concentrations of metals, especially iron. The purpose of this study was to evaluate the feasibility of reusing passively treated AMD in cooling systems with respect to corrosion control through laboratory experiments and pilot-scale field testing. The results showed that, with the addition of the inhibitor mixture orthophosphate and tolyltriazole, mild steel and copper corrosion rates were reduced to acceptable levels (< 0.127 mm/y and < 0.0076 mm/y, respectively). Aluminum had pitting corrosion problems in every condition tested, while cupronickel showed that, even in the absence of any inhibitor and in the presence of the biocide monochloramine, its corrosion rate was still very low (0.018 mm/y).     

Interaction of limestone grains and acidic solutions from the oxidation of pyrite tailings

To characterise the coatings formed and to analyse element partitioning between the aqueous and solid phase, suspensions were prepared with four grain sizes of limestone and three different amounts of acidic solution from oxidized pyrite tailings. In all cases, red coatings with three different layers covered the grain surface, sealing off the acidic solution. The inner layer was composed mainly of basaluminite, the middle layer of schwertmannite, and the outer layer of gypsum and jarosite. Zn, Cd and Tl were co-precipitated by Fe and Al; As and Pb were co-precipitated almost completely by Fe; and Cu formed mainly Cu sulphates. All trace elements reached almost total precipitation at pH 6.3, but the precipitation of As and Pb tended to decrease as the pH rose. Consequently, liming should be calculated so that the soil pH does not exceed 6.3. This calculation should take into account that the armouring of the limestone grains can cause underestimations in the amount of liming material needed.     

Influences of wetland plants on weathered acidic mine tailings

Establishment of Carex rostrata, Eriophorum angustifolium and Phragmites australis on weathered, acidic mine tailings (pH approximately 3) and their effect on pH in tailings were investigated in a field experiment. The amendments, sewage sludge and an ashes-sewage sludge mixture, were used as plant nutrition and their influence on the metal and As concentrations of plant shoots was analysed. An additional experiment was performed in greenhouse with E. angustifolium and sewage sludge as amendments in both weathered and unweathered tailings. After one year, plants grew better in amendments containing ashes in the field, also in those plants the metal and As shoot concentrations were generally lower than in other treatments. After two years, the only surviving plants were found in sewage sludge mixed with ashes. No effect on pH by plants was found in weathered acidic mine tailings in either field- or greenhouse experiment.     

Responses of Gammarus pulex (Amphipoda, Crustacea) to metalliferous effluents: identification of toxic components and the importance of interpopulation variation

This study was designed to evaluate the ability of an in-situ bioassay to assess the impact of complex effluents on freshwaters and to identify toxic components. Reductions in the feeding rate of Gammarus pulex proved to be a sensitive indicator of the impact of metalliferous effluents on receiving water quality. The effluents contained a mixture of five potentially toxic metals. By combining information on feeding rates with bioaccumulation data, two metals, iron and manganese, were identified as the probable toxic agents. Laboratory experiments validated the conclusions reached from the field study and confirmed that iron was a major toxicant. The sensitivities of Gammarus pulex from a metal-contaminated site and a clean site were compared during both the field and laboratory studies. Interpopulation differences in the response of G. pulex to toxicants were detected in the field study but not in the laboratory experiments. Possible reasons for this are discussed.     

Technical Description of Parameters Influencing the pH Value of Suspension Absorbent Used in Flue Gas Desulfurization Systems

Abstract

As a result of the large limestone deposits available in Poland, the low cost of reagent acquisition for the large-scale technological use and relatively well-documented processes of flue gas desulfurization (FGD) technologies based on limestone sorbent slurry, wet scrubbing desulfurization is a method of choice in Poland for flue gas treatment in energy production facilities, including power plants and industrial systems. The efficiency of FGD using the above method depends on several technological and kinetic parameters, particularly on the pH value of the sorbent (i.e., ground limestone suspended in water). Consequently, many studies in Poland and abroad address the impact of various parameters on the pH value of the sorbent suspension, such as the average diameter of sorbent particles (related to the limestone pulverization degree), sorbent quality (in terms of pure calcium carbonate [CaCO₃] content of the sorbent material), stoichiometric surfeit of CaCO₃ in relation to sulfur dioxide (SO₂) absorbed from flue gas circulating in the absorption node, time of absorption slurry retention in the absorber tank, chlorine ion concentration in sorbent slurry, and concentration of dissolved metal salts (Na, K, Mg, Fe, Al, and others). This study discusses the results of laboratory-scale tests conducted to establish the effect of the above parameters on the pH value of limestone slurry circulating in the SO₂ absorption node. On the basis of the test results, a correlation equation was postulated to help maintain the desirable pH value at the design phase of the wet FGD process. The postulated equation displays good coincidence between calculated pH values and those obtained using laboratory measurements.     

Bioremediation of coal tar PAH in soils using biodiesel

The addition of biodiesel together with nitrate and phosphate to soil containing coal tar, in laboratory and field experiments, resulted in degradation of coal tar polycyclic aromatic hydrocarbons (PAH) that was not apparent when the nutrients alone were added. The addition of motor diesel fuel instead of biodiesel was also tested. Over the 55 days of the field and laboratory experiments, the biodiesel resulted in an increased degradation of naphthalene in the coal tar by 52% and 85%, respectively, and motor diesel resulted in increased depletions of 85% and 96%, respectively. Other PAH containing up to four rings were depleted to lesser extents. The increases in PAH biodegradation by the diesel treatments were ascribed to tar solubilisation and dispersion thereby increasing the PAH bioavailability. The ready biodegradability and low phytotoxicity of biodiesel suggest that it may be suitable as a novel treatment for the bioremediation of coal tar contaminated soils.     

Bioremediation of acidic oily sludge-contaminated soil by the novel yeast strain Candida digboiensis TERI ASN6

Background, aim, and scope

Primitive wax refining techniques had resulted in almost 50,000 tonnes of acidic oily sludge (pH 1–3) being accumulated inside the Digboi refinery premises in Assam state, northeast India. A novel yeast species Candida digboiensis TERI ASN6 was obtained that could degrade the acidic petroleum hydrocarbons at pH 3 under laboratory conditions. The aim of this study was to evaluate the degradation potential of this strain under laboratory and field conditions.

Materials and methods

The ability of TERI ASN6 to degrade the hydrocarbons found in the acidic oily sludge was established by gravimetry and gas chromatography–mass spectroscopy. Following this, a feasibility study was done, on site, to study various treatments for the remediation of the acidic sludge. Among the treatments, the application of C. digboiensis TERI ASN6 with nutrients showed the highest degradation of the acidic oily sludge. This treatment was then selected for the full-scale bioremediation study conducted on site, inside the refinery premises.

Results

The novel yeast strain TERI ASN6 could degrade 40 mg of eicosane in 50 ml of minimal salts medium in 10 days and 72% of heneicosane in 192 h at pH 3. The degradation of alkanes yielded monocarboxylic acid intermediates while the polycyclic aromatic hydrocarbon pyrene found in the acidic oily sludge yielded the oxygenated intermediate pyrenol. In the feasibility study, the application of TERI ASN6 with nutrients showed a reduction of solvent extractable total petroleum hydrocarbon (TPH) from 160 to 28.81 g kg^?1 soil as compared to a TPH reduction from 183.85 to 151.10 g kg^?1 soil in the untreated control in 135 days. The full-scale bioremediation study in a 3,280-m² area in the refinery showed a reduction of TPH from 184.06 to 7.96 g kg^?1 soil in 175 days.

Discussion

Degradation of petroleum hydrocarbons by microbes is a well-known phenomenon, but most microbes are unable to withstand the low pH conditions found in Digboi refinery. The strain C. digboiensis could efficiently degrade the acidic oily sludge on site because of its robust nature, probably acquired by prolonged exposure to the contaminants.

Conclusions

This study establishes the potential of novel yeast strain to bioremediate hydrocarbons at low pH under field conditions.

Recommendations and perspectives

Acidic oily sludge is a potential environmental hazard. The components of the oily sludge are toxic and carcinogenic, and the acidity of the sludge further increases this problem. These results establish that the novel yeast strain C. digboiensis was able to degrade hydrocarbons at low pH and can therefore be used for bioremediating soils that have been contaminated by acidic hydrocarbon wastes generated by other methods as well.     

Redox reactions in the Fe-As-O2 system

We have examined two redox reactions involving arsenic and iron at near-neutral pH: the reduction of As(V) by Fe(II) under anoxic conditions, and the co-oxidation of As(III) during Fe(II) oxygenation. We also considered the impact of goethite, pH buffers, and radical scavengers on these reactions. In a series of anoxic experiments, Fe(II) was found to reduce As(V) in the presence of goethite, but not in homogeneous solution. The reaction rate increased with increasing pH and Fe(II) concentration, but in all cases was relatively slow. In aerobic experiments, the kinetics of Fe(II) oxygenation at neutral pH, and the corresponding oxidation of As(III) were found to depend heavily on pH buffer type and concentration. The classic formulation of Fe(II) oxidation by oxygen, involving four single-electron transfers, was reviewed and found to be inadequate for explaining observed oxidation of Fe(II) and As(III). Widely cited rate constants for Fe(II) oxygenation originate from experiments conducted in carbonate buffer, and do not match observations made in phosphate, MES, or HEPES systems. In phosphate buffer, Fe(II) oxidation is rapid and dependent on phosphate concentration. In MES and HEPES buffers, Fe(II) oxidation is much slower due to the lack of labile ferrous iron species. Oxygenation of Fe(II) appears to proceed through different mechanisms in phosphate and MES or HEPES systems. In both cases, reactive intermediary species are produced which can oxidize As(III). These oxidants are not the hydroxyl radical, but may be Fe(IV) species.     

Citric acid-modified Fenton's reaction for the oxidation of chlorinated ethylenes in soil solution systems

Fenton's reagent, a solution of hydrogen peroxide and ferrous iron catalyst, is used for an in situ chemical oxidation of organic contaminants. Sulfuric acid is commonly used to create an acidic condition needed for catalytic oxidation. Fenton's reaction often involves pressure buildup and precipitation of reaction products, which can cause safety hazards and diminish efficiency. We selected citric acid, a food-grade substance, as an acidifying agent to evaluate its efficiencies for organic contaminant removal in Fenton's reaction, and examined the impacts of using citric acid on the unwanted reaction products. A series of batch and column experiments were performed with varying H2O2 concentrations to decompose selected chlorinated ethylenes. Either dissolved iron from soil or iron sulfate salt was added to provide the iron catalyst in the batch tests. Batch experiments revealed that both citric and sulfuric acid systems achieved over 90% contaminant removal rates, and the presence of iron catalyst was essential for effective decontamination. Batch tests with citric acid showed no signs of pressure accumulation and solid precipitations, however the results suggested that an excessive usage of H2O2 relative to iron catalysts (Fe2+/H2O2<1/330) would result in lowering the efficiency of contaminant removal by iron chelation in the citric acid system. Column tests confirmed that citric acid could provide suitable acidic conditions to achieve higher than 55% contaminant removal rates.     

Preparation of acidic and alkaline macrocapsules for pH control

A series of experiments was performed to prepare acidic macroencapsulated buffers composed of 20% Ca(H2PO4)(2) and 80% Eudragit S 100 polymer and alkaline macrocapsules composed of 65% K2HPO4 and 35% Eudragit E PO polymer (the powdered form of Eudragit E 100). Eudragit S 100 was shown to be soluble at a pH greater than 7.0, while Eudragit E 100 was soluble at a pH less than 7.0. Both polymers did not impart significant biochemical oxygen demand. The Eudragit E PO polymer solution showed low toxicity (EC50=91%) based on the Microtox Acute Toxicity Test compared to the 0.1mM background phosphate buffer solution (EC50=100%) while the Eudragit S 100 polymer solution showed higher toxicity (EC50=53%). Batch tests showed that the acidic macrocapsules reduced the pH of a 0.1mM phosphate solution from 11 to neutral, while the alkaline macrocapsules increased the pH of a 0.1mM phosphate solution from 3 to neutral. The macrocapsules could potentially be used as an in situ proportional pH controller for groundwater remediation.     

Chemical and biological effects of acid, aluminium and lime additions to a Welsh Hill-stream

Chemical and biological responses to simultaneous additions of acid, aluminium and lime were investigated in contiguous 250m-reaches of a chronically acidic stream in Wales. Treatments were applied for 24 h, and from the upstream end were as follows: zone A-untreated, pH 5.0, 0.37 mg litre(-1) filterable Al; zone B-acidified to pH 4.5, 0.40 mg Al litre(-1) (47% of Al attributed to release from the stream bed due to acid additions); zone C-acidified to pH 4.5 and Al dosed to 0.67 mg litre(-1); zone D-dosed with limestone slurry, resulting in pH 7.2, 0.13 mg Al litre(-1). In all reaches, the chemistry of the interstitial water at depths of 0.15 and 0.3 m never fell below pH 5.5, with corresponding decreases in Al and increases in base cation concentrations. Brown trout, Salmo trutta, and crayfish, Austropotamobius pallipes, held in the stream showed decreases in plasma [Na(+)] and haemolymph [Na(+)], respectively, in all acidic zones (A, B, C): these responses were mitigated by liming (zone D). Thus both chronic and simulated episodic levels of pH and dissolved Al were sub-lethally toxic to test species of aquatic fauna. This experiment also demonstrates a stream bed source/sink of Al, and the availability of a possible refuge from acidic surface waters within the substratum.