Geochemical and mineralogical characterization of a neutral, low-sulfide/high-carbonate tailings impoundment, Markušovce, eastern Slovakia

Tailings deposits generated from mining activities represent a potential risk for the aquatic environment through the release of potentially toxic metals and metalloids occurring in a variety of minerals present in the tailings. Physicochemical and mineralogical characteristics of tailings such as total concentrations of chemical elements, pH, ratio of acid-producing to acid-neutralizing minerals, and primary and secondary mineral phases are very important factors that control the actual release of potentially toxic metals and metalloids from the tailings to the environment. The aims of this study are the determination of geochemical and mineralogical characteristics of tailings deposited in voluminous impoundment situated near the village of Marku?ovce (eastern Slovakia) and identification of the processes controlling the mobility of selected toxic metals (Cu, Hg) and metalloids (As, Sb). The studied tailings have unique features in comparison with the other tailings investigated previously because of the specific mineral assemblage primarily consisting of barite, siderite, quartz, and minor sulfides. To meet the aims, samples of the tailings were collected from 3 boreholes and 15 excavated pits and subjected to bulk geochemical analyses (i.e., determination of chemical composition, pH, Eh, acid generation, and neutralization potentials) combined with detailed mineralogical characterization using optical microscopy, X-ray diffraction (XRD), electron microprobe analysis (EMPA), and micro-X-ray diffraction (μ-XRD). Additionally, the geochemical and mineralogical factors controlling the transfer of potentially toxic elements from tailings to waters were also determined using short-term batch test (European norm EN 12457), sampling of drainage waters and speciation–equilibrium calculations performed with PHREEQC. The tailings mineral assemblage consists of siderite, barite, quartz, and dolomite. Sulfide minerals constitute only a minor proportion of the tailings mineral assemblage and their occurrence follows the order: chalcopyrite?>?pyrite?>?tetrahedrite?>?arsenopyrite. The mineralogical composition of the tailings corresponds well to the primary mineralization mined. The neutralization capacity of the tailings is high, as confirmed by the values of neutralization potential to acid generation potential ratio, ranging from 6.7 to 63.9, and neutral to slightly alkaline pH of the tailings (paste pH 7.16–8.12) and the waters (pH 7.00–8.52). This is explained by abundant occurrence of carbonate minerals in the tailings, which readily neutralize the acidity generated by sulfide oxidation. The total solid-phase concentrations of metal(loid)s decrease as Cu?>?Sb?>?Hg?>?As and reflect the proportions of sulfides present in the tailings. Sulfide oxidation generally extends to a depth of 2 m. μ-XRD and EMPA were used to study secondary products developed on the surface of sulfide minerals and within the tailings. The main secondary minerals identified are goethite and X-ray amorphous Fe oxyhydroxides and their occurrence decreases with increasing tailings depth. Secondary Fe phases are found as mineral coatings or individual grains and retain relatively high amounts of metal(loid)s (up to 57.6 wt% Cu, 1.60 wt% Hg, 23.8 wt% As, and 2.37 wt% Sb). Based on batch leaching tests and lysimeter results, the mobility of potentially toxic elements in the tailings is low. The limited mobility of metals and metalloids is due to their retention by Fe oxyhydroxides and low solubilities of metal(loid)-bearing sulfides. The observations are consistent with PHREEQC calculations, which predict the precipitation of Fe oxyhydroxides as the main solubility-controlling mineral phases for As, Cu, Hg, and Sb. Waters discharging from tailings impoundment are characterized by a neutral to slightly alkaline pH (7.52–7.96) and low concentrations of dissolved metal(loid)s (<5–7.0 μg/L Cu, <0.1–0.3 μg/L Hg, 5.0–16 μg/L As, and 5.0–43 μg/L Sb). Primary factors influencing aqueous chemistry at the site are mutual processes of sulfide oxidation and carbonate dissolution as well as precipitation reactions and sorption onto hydrous ferric oxides abundantly present at the discharge of the impoundment waters. The results of the study show that, presently, there are no threats of acid mine drainage formation at the site and significant contamination of natural aquatic ecosystem in the close vicinity of the tailings impoundment.     

Evaluation of long-term sulfide oxidation processes within pyrrhotite-rich tailings, Lynn Lake, Manitoba

Oxidation reactions have depleted sulfide minerals in the shallow tailings and have generated sulfate- and metal-rich pore water throughout the East Tailings Management Area (ETMA) at Lynn Lake, Manitoba, Canada. Information concerning the tailings geochemistry and mineralogy suggest the sulfide oxidation processes have reached an advanced stage in the area proximal to the point of tailings discharge. In contrast, the distal tailings, or slimes area, have a higher moisture content close to the impoundment surface, thereby impeding the ingress of oxygen and limiting sulfide oxidation. Numerical modelling of sulfide oxidation indicates the maximum rate of release for sulfate, Fe, and Ni occurred shortly after tailings deposition ceased. Although the sulfide minerals have been depleted in the very shallow tailings, the modelling suggests that sulfide oxidation will continue for hundreds and possibly thousands of years. The combination of sulfide minerals, principally pyrrhotite, that is susceptible to weathering processes and the relatively dry, coarse-grained nature of the tailings have resulted in the formation of a massive-hardpan layer in the proximal area of the ETMA. Because extensive accumulations of secondary oxyhydroxides of ferric iron are already present, remediation strategies for the ETMA should focus on mitigating the release of sulfide oxidation products rather than on preventing further oxidation.     

Phosphorus characterization in sediments impacted by septic effluent at four sites in central Canada

Characterization of phosphorus (P) enriched solids was undertaken in the sediments below four mature septic system infiltration beds, where previous monitoring of phosphate (PO₄) concentrations in the groundwater had indicated that substantial retention of P was occurring in the vadose zone. At each site, zones of sediment P enrichment were identified by an acid extraction procedure. Acid extractable sediment P concentrations were found to be 2–5 times higher than background values, within narrow discrete zones generally 10–30 cm in thickness, located within one meter of the infiltration pipes. Back scattered electron images of the P enriched zones indicated that the P solids occurred as distinct authigenic grains (up to 300 μm diameter) and as grain coatings. Microprobe analyses indicated predominantly Fe–P in calcareous sediments (Cambridge and Langton) and Al–Fe–P in non-calcareous sediments (Muskoka and Harp Lake). Porewater analyses indicated that the zones of P accumulation were closely associated with zones of redox change characterized by the conversion of effluent NH₄⁺ to NO₃⁻. The data suggests that a substantial amount of the septic derived P is being attenuated by mineral precipitation reactions that occur rapidly after the effluent encounters subsurface sediments. Reductive dissolution of ferric (oxy)hydroxide minerals as a consequence of reducing environments near the infiltrations pipes, the release of Fe²⁺ in solution and subsequent conversion of Fe²⁺ to Fe³⁺ may promote the precipitation of ferric or ferrosoferric PO₄ minerals. In sediments with limited buffering capacity (calcite deficient), the decrease in pH resulting from effluent oxidation may cause Al (oxy)hydroxide dissolution and subsequent precipitation of Al–P rich phases. These precipitation reactions appear to have the capacity to immobilize a substantial amount of septic derived P (25–99% at these sites) for a considerable period of time.     

Removal of As,Mn, Mo,Se, U,V and Zn from groundwater by zero-valent iron in a passive treatment cell: reaction progress modeling

Three treatment cells were operated at a site near Durango, CO. One treatment cell operated for more than 3 years. The treatment cells were used for passive removal of contamination from groundwater at a uranium mill tailings repository site. Zero-valent iron [Fe(0)] that had been powdered, bound with aluminosilicate and molded into plates was used as a reactive material in one treatment cell. The others used granular Fe(0) and steel wool. The treatment cells significantly reduced concentrations of As, Mn, Mo, Se, U, V and Zn in groundwater that flowed through it. Zero-valent iron [Fe(0)], magnetite (Fe3O4), calcite (CaCO3), goethite (FeOOH) and mixtures of contaminant-bearing phases were identified in the solid fraction of one treatment cell. A reaction progress approach was used to model chemical evolution of water chemistry as it reacted with the Fe(0). Precipitation of calcite, ferrous hydroxide [Fe(OH)2] and ferrous sulfide (FeS) were used to simulate observed changes in major-ion aqueous chemistry. The amount of reaction progress differed for each treatment cell. Changes in contaminant concentrations were consistent with precipitation of reduced oxides (UO2, V2O3), sulfides (As2S3, ZnS), iron minerals (FeSe2, FeMoO4) and carbonate (MnCO3). Formation of a free gas phase and precipitation of minerals contributed to loss of hydraulic conductivity in one treatment cell.     

Effects of a reactive barrier and aquifer geology on metal distribution and mobility in a mine drainage impacted aquifer

The Nickel Rim aquifer has been impacted for five decades by a metal-rich plume generated from the Nickel Rim mine tailings impoundment. Metals released by the oxidation of pyrrhotite in the unsaturated zone of the tailings migrate into the downgradient aquifer, affecting both the groundwater and the aquifer solids. A reactive barrier has been installed in the aquifer to remove sulfate and metals from the groundwater. The effect of the reactive barrier on metal concentrations in the aquifer solids has not previously been studied. In this study, a series of selective extraction procedures was applied to cores of aquifer sediment, to ascertain the distribution of metals among various solid phases present in the aquifer. Extraction results were combined with groundwater chemistry, geochemical modelling and solid-phase microanalyses, to assess the potential mobility of metals under changing geochemical conditions. Reactions within the reactive barrier caused an increase in the solid-phase carbonate content downgradient from the barrier. The concentrations of poorly crystalline, oxidized phases of Mn and Fe, as well as concentrations of Cr(III) associated with oxidized Fe, and poorly crystalline Zn, are lower downgradient from the barrier, whereas total solid-phase metal concentrations remain constant. Iron and Mn accumulate as oxidized, easily extractable forms in a peat layer overlying the aquifer. Although these oxides may buffer reducing plumes, they also have the potential to release metals to the groundwater, should a reduced condition be imposed on the aquifer by remedial actions.     

Decreased acid deposition and the chemical recovery of Killarney,Ontario, lakes

Lakes in Killarney Park near Sudbury, Ontario, Canada, have shown dramatic water quality changes including general increases in pH and alkalinity, and decreases in SO4(2-), base cations and metals. While some lakes have recovered to pH > 6.0, many are still highly acidic despite decades of improvement. Very high historical S deposition related to emissions from the Sudbury metal smelters dominated the acidification process in this region. However, since the implementation of substantial S emission controls (90%) at the smelters, the Sudbury emissions are no longer the major source of S deposition in the Sudbury area. Wet deposition of SO4(2-) and SO4(2-) concentrations in lakewaters at Killarney now approach values in the Dorset, Ontario, area, about 200 km from Sudbury. This suggests that the S deposition to the Killarney area is now primarily from long-range transport, not from local sources. Studies of Killarney lakes are revealing the complex nature of the chemical recovery process. As lake acidity decreases, other changes including decreased Ca2+ concentrations, increased transparency, and altered thermal regimes may potentially affect some of these ecosystems. It is clear that continuing assessments of the recovery of Killarney lakes, within a multiple-stressor framework, are needed.     

Geochemistry of a septic-system plume in a coastal barrier bar, Point Pelee, Ontario, Canada

The major ion and trace metal geochemistry of a septic system plume in a shallow sand aquifer was characterized to assess geochemical processes controlling the transport of nutrients and their release to a nearby wetland. The plume was generated from a 16-year-old tile bed, and is more than 60 m long, 40 m wide and 7 m thick. The groundwater pH at the site is near neutral, but up to 0.4 units lower in the plume core as a result of H⁺ generated from NH₃ and DOC oxidation in the unsaturated zone. The plume can be divided into distinct redox zones, which show differences in nutrient mobility. Proximal to the tile bed, there is a shallow suboxic zone, with intermediate Eh values (>400 mV), low concentrations of dissolved oxygen (<1.0 mg/l), and elevated concentrations of Mn (1–3 mg/l) and nutrients (10–80 mg/l NO₃–N, 1–15 mg/l NH₃–N, 0.1–1.5 mg/l PO₄–P, 6–13 mg/l dissolved organic carbon). At the base of the aquifer, there is a reduced zone (Eh<200 mV) with elevated concentrations of Fe (1–14 mg/l), PO₄ and NH₃, but negligible concentrations of NO₃ (<0.01 mg/l N). Distal from the tile bed, the shallow groundwater is suboxic to oxic, and has elevated concentrations of NO₃ and NH_3, but negligible PO₄. In the lower reduced zone, elevated concentrations of PO₄ occur up to 60 m away. The release of groundwater containing even very low concentrations of PO₄ (<0.02 mg/l P) can lead to the development of eutrophic conditions in surface water bodies. Geochemical calculations indicate that, in the Mn-rich zone, the groundwater is close to saturation or supersaturated with respect to hydroxyapatite, rhodochrosite, calcite and ferrihydrite. In the reduced zone, the groundwater is close to saturation or supersaturated with respect to hydroxyapatite, vivianite, calcite and siderite. Formation of these phases, or related phases, are likely limiting the concentrations of dissolved PO₄, Fe and Mn and controlling the geochemical evolution of the plume.     

The hydrogeology of a tailings impoundment formed by central discharge of thickened tailings: implications for tailings management

The Kidd Creek Cu–Zn sulfide mine is located near Timmins, Ontario. Mill tailings are thickened and deposited as a slurry in a circular impoundment with an area of approximately 1200 ha. Deposition of tailings as a thickened slurry from a central discharge ramp results in a conical-shaped tailings deposit with low perimeter dykes, a uniform grain-size distribution, uniform and low hydraulic conductivity, and a tension-saturated zone above the water table up to 5 to 6 m thick. These characteristics provide benefits over conventionally disposed tailings with respect to tailings management. The thick tension-saturated zone within the tailings limits the thickness of unsaturated tailings that are susceptible to rapid sulfide oxidation. The conical shape of the deposit results in the formation of a recharge area near the centre of the impoundment and discharge in the peripheral areas. In contrast, the elevated nature of many conventional, unthickened tailings impoundments results in recharge over most of the surface of the impoundment, with discharge occurring outside the impoundment through large containment dykes. Three-dimensional pore water flow modelling suggests that approximately 90% of the total discharge from the thickened tailings occurs within the tailings impoundment. When discharge is confined within the impoundment, there is improved control over low-quality effluent, and an opportunity to design passive control measures to reduce treatment costs and minimize environmental impacts.     

Reuse of washing effluent containing oxalic acid by a combined precipitation–acidification process

This study aims at evaluating the reuse feasibility of effluent produced by the soil washing of mine tailings with oxalic acid. Alkaline chemicals such as NaOH, Ca(OH)₂, and Na₂CO₃ are used for the precipitation of arsenic and heavy metals in the effluent containing oxalic acid. All of the target contaminants are removed with very high efficiency (up to 100%) at high pH. The precipitation using NaOH at pH 9 is determined to be the most cost-effective method for the removal of arsenic as well as heavy metals in the effluent. The effluent decontaminated by NaOH is consecutively reused for the soil washing of raw mine tailings, resulting in considerable efficiency. Furthermore, even more arsenic and heavy metals are extracted from raw mine tailings by acidifying the decontaminated effluent under the alkaline condition, compared with direct reuse of the decontaminated effluent. Here, the oxalic acid, which is a weak complex-forming ligand as well as a weak acid, has noticeable effects on both soil washing and effluent treatment by precipitation. It extracts efficiently the contaminants from the mine tailings without adverse change of soil and also makes possible the precipitation of the contaminants in the effluent unlike strong chelating reagent. Reuse of the washing effluent containing oxalic acid would make the existing soil washing process more environment-friendly and cost-effective.     

Multi-component reactive transport modeling of natural attenuation of an acid groundwater plume at a uranium mill tailings site

Natural attenuation of an acidic plume in the aquifer underneath a uranium mill tailings pond in Wyoming, USA was simulated using the multi-component reactive transport code PHREEQC. A one-dimensional model was constructed for the site and the model included advective-dispersive transport, aqueous speciation of 11 components, and precipitation-dissolution of six minerals. Transport simulation was performed for a reclamation scenario in which the source of acidic seepage will be terminated after 5 years and the plume will then be flushed by uncontaminated upgradient groundwater. Simulations show that successive pH buffer reactions with calcite, Al(OH)3(a), and Fe(OH)3(a) create distinct geochemical zones and most reactions occur at the boundaries of geochemical zones. The complex interplay of physical transport processes and chemical reactions produce multiple concentration waves. For SO4(2-) transport, the concentration waves are related to advection-dispersion, and gypsum precipitation and dissolution. Wave speeds from numerical simulations compare well to an analytical solution for wave propagation.     

Interaction of limestone grains and acidic solutions from the oxidation of pyrite tailings

To characterise the coatings formed and to analyse element partitioning between the aqueous and solid phase, suspensions were prepared with four grain sizes of limestone and three different amounts of acidic solution from oxidized pyrite tailings. In all cases, red coatings with three different layers covered the grain surface, sealing off the acidic solution. The inner layer was composed mainly of basaluminite, the middle layer of schwertmannite, and the outer layer of gypsum and jarosite. Zn, Cd and Tl were co-precipitated by Fe and Al; As and Pb were co-precipitated almost completely by Fe; and Cu formed mainly Cu sulphates. All trace elements reached almost total precipitation at pH 6.3, but the precipitation of As and Pb tended to decrease as the pH rose. Consequently, liming should be calculated so that the soil pH does not exceed 6.3. This calculation should take into account that the armouring of the limestone grains can cause underestimations in the amount of liming material needed.     

Geochemical characterization of acid mine drainage from a waste rock pile, Mine Doyon, Québec, Canada

Water quality in the unsaturated and saturated zones of a waste rock pile containing sulphides was investigated. The main objectives of the project were (1) the evaluation of geochemical trends including the acid mine drainage (AMD)-buffering mechanism and the role of secondary minerals, and (2) the investigation of the use of stable isotopes for the interpretation of physical and geochemical processes in waste rock. Pore water in unsaturated zone was sampled from suction lysimeters and with piezometers in underlying saturated rocks. The investigation revealed strong temporal (dry period vs. recharge period), and spatial (slope vs. central region of pile) variability in the formation of acid mine drainage. The main secondary minerals observed were gypsum and jarosite. There was a higher concentration of gypsum in solid phase at Site TBT than at Site 6, suggesting that part of the gypsum formed at Site 6 in the early stage of AMD has been already dissolved. Formation of secondary minerals contributed to the formation of AMD by opening of foliation planes in waste rock, thus increasing the access of oxidants like O2 and Fe3+ to previously encapsulated pyrite. The behavior of several dissolved species such as Mg, Al, and Fe2+ can be considered as conservative in the leachate. Stable isotopes, deuterium and 18O, indicated internal evaporation within the pile, and were used to trace recharge pulses from snowmelt. Isotope trends for 34S and 18O(SO4) indicated a lack of sulfate reduction and zones of active oxidation of pyrite, respectively. Results of numerical modeling of pyrite oxidation and gas and water transport were consistent with geochemical and isotopic trends and confirmed zones of high evaporation rate within the rock pile close to the slope. The results indicate that physical and chemical processes within the pile are strongly coupled and cannot be considered separately when oxidation rates are high and influence gas transport as a result of heat generation.     

Evaluation of the anthropogenic influx of metal and metalloid contaminants into the Moulay Bousselham lagoon, Morocco, using chemometric methods coupled to geographical information systems

Superficial and cored sediment samples from the Moulay Bousselham lagoon and sub-watershed were analyzed for Al, Fe, Cu, Zn, Pb, Mn, Ni, Cr, As, Hg, and Cd. The temporal and spatial distributions of the main contamination sources of heavy metals were identified and described using chemometric and geographic information system (GIS) methods. Sediments from coastal lagoons near urban and agricultural areas are commonly contaminated with heavy metals, and the concentrations found in surface sediments are significantly higher than those from 50–100 years ago. The concentrations of these elements decrease sharply with depth in the sediment column, and the elements are preferentially enriched in the <2-μm-sized fraction of the sediment. The zones of enhanced risk of heavy metals were detected by means of GIS-based geostatistical modeling. According to sediment pollution indices and statistical analysis, heavy metals (Pb, Cu, Ni, Zn, Cr, and Hg) that pose a risk have become largely enriched in the lagoon sediments during the recent period of agricultural intensification.     

Influence of Spartina alterniflora on the mobility of heavy metals in salt marsh sediments of the Yangtze River Estuary, China

Using bio-disturbed sulphide to trace the mobility and transformation of Cu, Pb, Ni and Zn in the sediments of the Spartina alterniflora-dominated salt marsh in the Yangtze River Estuary, measurements were made of the seasonal variations of acid-volatile sulphide (AVS) and of the simultaneously extracted metals (SEM) in the rhizosphere sediments. Microcosm incubation experiments recreating flooding conditions were conducted to evaluate the effect of AVS and other metal binding phases upon the dynamics of Cu, Pb, Ni and Zn in the salt marsh sediments. The results demonstrate that the ratio values of SEM/AVS have a significant seasonal variation in the rhizosphere sediments and that the anoxic conditions in the sediments were likely enhanced by S. alterniflora during the summer and autumn compared with the anoxic conditions resulting from the native species Phragmites australis and Scirpus mariqueter. The incubation experiments suggest that Fe(III) and Mn(IV/III) (hydr)oxides provide important binding sites for heavy metals under oxic conditions, and sulphide provides important binding sites for the Cu and Pb under anoxic conditions. Our observations indicate that the mobility of heavy metals in the salt marsh sediments is strongly influenced by biogeochemical redox processes and that the invasive S. alterniflora may increase the seasonal fluctuation in heavy metal bioavailability in the salt marsh ecosystem.     

Acid mine drainage arising from gold mining activity in Johannesburg,South Africa and environs

The Witwatersrand region of South Africa is famous for its gold production and a major conurbation, centred on Johannesburg, has developed as a result of mining activity. A study was undertaken of surface and ground water in a drainage system in this area. Soils were also analysed from a site within the mining district. This study revealed that the ground water within the mining district is heavily contaminated and acidified as a result of oxidation of pyrite (FeS2) contained within mine tailings dumps, and has elevated concentrations of heavy metals. Where the water table is close to surface, the upper 20 cm of soil profiles are severely contaminated by heavy metals due to capillary rise and evaporation of the ground water. The polluted ground water is discharging into streams in the area and contributes up to 20% of stream discharge, causing a lowering of pH of the stream water. Much of the metal load is precipitated in the stream: Fe and Mn precipitate as a consequence of oxidation, while other heavy metals are being removed by co-precipitation. The oxidation of iron has created a redox buffer which controls the pH of the stream water. The rate of oxidation and of dilution is slow and the deleterious effect of the addition of contaminated water persists for more than 10 km beyond the source.     

Chemical and mineralogical forms of Cu and Ni in contaminated soils from the Sudbury mining and smelting region, Canada

Available information on soil contamination by trace elements in the Sudbury Cu/Ni mining and smelting region consists largely of total elemental concentration data. Little is known about the mode of occurrence and behaviour of Cu and Ni (the main metallic contaminants) in the soils of the region. In this study, sequential extraction and Scanning Electron Microscopy and Energy Dispersive X-ray Analysis (SEM/EDX) observations were complementarily used to define Cu and Ni forms in the Sudbury soils, so as to assess metal mobility. Most Cu (on average 75%) was associated with 'non-residual' soil forms, whereas Ni was mainly (on average 60%) associated with inorganic 'residual' forms of a sulphide and oxide nature. Therefore, Cu occurs in the soils in more mobile forms than Ni. Consequently, Cu should be removed from these soils at a faster rate than Ni. This is an unusual finding, because generally Ni is known to be more mobile in soils than Cu. SEM/EDX analysis confirmed the greater Cu mobility by showing that the metal was strongly associated with organic matter and was homogeneously distributed on the clay fraction surfaces. Nickel occurred alone or was associated with Fe oxides in various size fractions. Both elements were found as sulphides but Ni was often included in the silicate matrices of spherical particles in associations with Fe. SEM/EDX observations have shown that Cu and Ni are associated with soil forms which would not have been predicted by the sequential extraction alone, such as carbonaceous material, silicate spheres and carbonate particles, supporting complementary use of the two techniques.     

Levels of lead, cadmium and other elements in mink and otter from Ontario, Canada

Concentrations of Pb, Cd, Cu, Ni, Fe, Zn, Mn, Ca, P, Mg and S were measured in tissues of mink (Mustela vision) and river otter (Lutra canadensis) from five areas of Ontario, Canada. Bone Pb levels in both species were lowest in animals from the collection site most remote from industrial activity and atmospheric deposition of pollutants. Mean liver and kidney Cd levels were also different between collection sites and may reflect natural and/or anthropogenic sources. Copper levels in liver, but not kidney, were elevated in mink and otter from the heavily Cu-contaminated Sudbury region. However, tissue levels did not reflect environmental loading of other metals, such as Fe, Ni and Zn, in the Sudbury area. This may be a function of effective homeostatic regulation in mammals, or low potential for biomagnification of these elements.     

Dissolution of trace metals from particles of industrial origin and its influence on the composition of rainwater

The dissolution of trace metals (Fe, Mn, Cu, Zn, Ca and Mg) from pulverized fuel ash and steel dust particles in aqueous suspensions was studied as a function of solution pH and aerosol mass loading. The rate of dissolution, the final concentration and the fraction of the metal leached increased with decreasing pH over the range of pH 2.5→ 5. The leaching of aerosol particles is an important source of trace metals in rainwater, and the results of the leaching experiments were found to be consistent with the observations of these metals in urban rainwater. Alkaline materials such as Ca and Mg leached from particles may be important in the electroneutrality balance of rainwater and they could affect the solution pH. The dissolution of metals such as Fe and Mn may provide catalysts which could be important in the aqueous oxidation of SO₂, and the leaching of Ca and Mg may have a ‘buffering’ effect in reacting cloud and aerosol droplets.     

The effect of manipulating sediment pH on the porewater chemistry of copper- and zinc-spiked sediments

Spiking of sediment with metal cations that readily hydrolyse causes the sediment pH to decrease. Displaced iron and manganese also oxidise and hydrolyse, further lowering sediment pH. The lower pH of metal-spiked sediments requires a subsequent sediment neutralisation. This research compared the pH adjustment of Cu- and Zn-spiked sediments using single and multiple additions of 1M NaOH. Sediment pH, redox potential, and porewater metal concentrations were monitored over 40 days. Depth profiles were also measured to investigate stratification. A single pH adjustment to pH 7 and 8 initially counteracted the pH change caused by metal additions, however, pH continued to decrease slowly thereafter. Multiple pH adjustments diminished porewater Cu, Zn and Fe concentrations to a greater extent than a single pH adjustment, but the ongoing oxidative precipitation of porewater metals continued to consume OH(-) ions and impede pH maintenance. Displacement of high iron(II) concentrations and the opposing rates of iron(II) oxidative precipitation and bacterially-mediated iron(II) production, affected the partitioning of the added metals between the sediment and pore water. Despite similar pH over the spiked-metal concentration gradient following pH adjustment, sediments spiked with higher metal concentrations produced lower porewater Fe concentrations, possibly due to toxicity to iron(III) oxyhydroxide reducing bacteria. Distinct stratification of redox potential and dissolved Fe and Cu developed over a depth of 6cm during the 40-day equilibration period. Recommendations are provided on methods for preparing metal-spiked sediments in which the partitioning of metals between dissolved and particulate phases better resembles that of in situ (field) metal-contaminated sediments.     

Geochemical partitioning of Co, Cr, Fe, Sc and Zn in polluted and non-polluted marine sediments

The partitioning of Co, Cr, Fe, Sc and Zn into three fractions (reducible by acidified hydroxylamine hydrochloride, oxidizable by acidified hydrogen peroxide, and the residual after the previous extractions) of Saronikos Gulf surface sediments was determined by using a sequential extraction technique. The metal concentrations were determined by Instrumental Neutron Activation Analysis. With the exception of Sc, the metal content in the reducible and oxidizable fractions increases in the polluted sediments near the Athens Sewage Outfall (ASO) and a Fertilizer Plant (FP). In the non-polluted sediments, the residual fraction is the most important carrier for all metals examined. Oxidizable Cr and Zn correlate well with the organic carbon content of the sediments, but the reducible fraction (mainly Fe/Mn hydroxides) is the most important sink for Co, Cr, Fe and Zn in the polluted sediments near the ASO. The pyrite-rich wastes from the FP are influencing the geochemical partitioning of the metals examined in the sediments in front of the FP and, partially, in the sediments near the ASO.