Clay, Phosphate Adsorption, Dispersion, and Rheology

Soluble phosphate is a common ingredient of fertilizer used in agriculture production all over the world. This chemical mixed with soil is transported into the water and marine environment via rainfall causing a range of environmental problems such as toxic algae bloom. Kaolin clay is a common material found in soil and is used as a model system to understand the effects of phosphate adsorption on the flocculation/dispersion of the clay slurries. In the topics, torrential downpours are common. The large water flow will easily disperse the unflocculated or weakly flocculated sediments over a wide area including river and marine environments. Phosphate adsorption was found to weaken the interparticle forces between clay platelets in the slurries. At high enough concentration, it will completely deflocculate the clay slurries, i.e. the net interparticle force is repulsive. A deflocculated slurry is characterised by a low viscosity and no yield stress. As a result, it is much easier to disperse this slurry over a wide area possible even in a small downpour. This study will present the flow and yield stress behaviour of kaolin clay slurries under the influence of adsorbed phosphate.     

Trends in Fish Community Structure,Biomass, and Production in Three Algoma,Ontario, Lakes

Long-term (i.e. >10 years) whole community fish dataincluding catch-per-unit-effort, abundance, biomass, andproduction from three lakes were used: 1) to examine variabilityin fish population and community measures among years using wholelake assessments of fish populations derived from mark recaptureexperiments, 2) to assess implications arising from monitoringindividual species vs. the whole fish community, and 3) toascertain whether, in fisheries assessments (science) a commonlyused surrogate measure, [catch-per-unit-effort (CPUE)] reflectedannual changes in the fish assemblage, and thus may be a goodestimator of abundance. High, long-term variability was evident in the abundance andbiomass of a fish species in our lakes, yet the communityremained relatively stable in terms of its biomass andproduction. Changes in total fish community biomass appear drivenby large species, which, relative to small fish species, remainstable among years. Among years, species richness remainedstable; however, fish species changed in the community. AnnualCPUE was found to be a suitable surrogate for abundance (N) ofsmall fishes; CPUE x mean weight of the catch (bCPUE) was asuitable surrogate for biomass (B) of large fishes. Prior toconcluding that a change in a fish population has occurred as aresult of a stressor, care must be taken to critically examinethe level of population assessment in order to avoid acceptingpotentially invalid conclusions.     

Behaviour of Cd,Cr, Mn,Ni, Pb,and Zn in sewage sludge incineration by fluidised bed furnace

Cd, Cr, Mn, Ni, Pb, and Zn behaviour during sewage sludge incineration was investigated in seven pilot tests using a circulating fluidised bed furnace. Dewatered sludge at a solids concentration of 15-18% was fed to the furnace either alone (two tests) or spiked with chlorinated organic compounds (five tests). The behaviour of metals in the fluidised bed furnace was studied by comparing metal concentrations in the two main ash streams: ash separated from the cyclone immediately following the fluidised bed furnace, and fly ash recovered in the final bag filter. A metal enrichment factor was defined as the ratio of metal concentration between filter ash and cyclone ash. Only Cd and Pb showed any significant enrichment. Their enrichment factors were mainly affected by chlorine concentration in the feed sludge. To check whether simple equilibrium models may explain and predict metal behaviour, experimental data were compared with percentage of the metal vaporisation in the combustion chamber predicted using a thermodynamic model. Discrepancies between model predictions and experimental results are accounted for by considering that kinetics may be a limiting factor in the formation of metal chloride gaseous species. Due to the very short sludge residence time in the fluidised bed furnace, the gaseous compounds have little chance to evolve completely.     

Atmospheric Metal Pollutants-Archives, Methods, and History

Pollution of the atmosphere with cadmium (Cd), mercury (Hg), and lead (Pb) is a consequence of human activities. Natural archives are necessary to reconstruct the long-term history of metal deposition because accurate measurement of atmospheric deposition is a recent accomplishment. Reconstructions require: (1) accurate determination of concentrations of elements and isotopes, (2) accurate chronology of archives, and (3) archives that faithfully record atmosphere deposition. The most useful long-term archives are accumulations of ice and snow, peat, and lake sediment. Quantification of Cd deposition is uncommon because of its low concentration and substantial chemical mobility. Nonetheless, trends in peat and lake sediment are similar to those of Hg and Pb since ca. 1800 a.d. Both Hg and Pb are relatively chemically immobile and thus the peat and lake archives are believed to record historic trends of atmospheric deposition. Isotopic and concentration studies of Pb indicate a history of northern hemisphere atmospheric pollution extending back prior to 0 a.d. Although measurements of Hg concentration are now routine, isotopic measurements are in their infancy. Some Hg pollution sources have unique isotopic ratios, thereby contributing unique signals to the total Hg. Maximum accumulation rates of Hg and Pb occur up to 10 years later than for Cd (1970s versus 1960s in eastern North America, perhaps slightly later in Europe). By 2004, deposition of Cd, Hg, and Pb had declined from peak values in eastern North America more than 75, 75, and 90%, respectively.     

Waste incineration,PVC, and dioxins

Waste incineration is becoming increasingly necessary to tackle the rapidly rising amounts of municipal solid waste (MSW); in China many large cities are already surrounded by a girdle of landfills. Still, the not-in-my-backyard (nimby) syndrome holds strong. This attitude stems from fear of dioxins. These have been associated with incineration (‘dioxin factories’) and at times also with polyvinylchloride. In this paper this issue is analysed. China should build additional trust in MSW incineration, following promulgation of stricter emission standards, enforced by stringent controls.     

Integrated Environmental and Hydraulic Design of Xerias River,Corinthos, Greece,Training Works

The modern design of flood protection and training works in cases of major natural streams and creeks, requires a fine balance between a sound engineering approach in all engineering aspects on one hand, and an environmentally acceptable solution on the other. Progress in integrating environmental and hydraulic design has been achieved over the years due to different factors, like proper collaboration of engineering disciplines, hydraulic modeling enhancement, development and use of suitable materials, amelioration of the construction methods, and proper restoration and use of the affected areas. In this paper, a synopsis of the experience that has been gained by our firm over the years in designing flood protection and river training works for urban and rural areas is presented, including the general design principles to be used as guidelines, and illustrated with the case study of river Xerias, Greece. The river Xerias is located in Peloponnese, Greece. It flows from south to north and has a catchment area of 170 km². For the last 1500 m before discharging into the Corinthian gulf, the river flows through the city of Corinthos. This is the reach, which overflowed and flooded the city during the January 1997 flood, causing a lot of damage and human life casualties.     

Residential Flood Damage After Hurricane Floyd,Mold, Household Remediation,and Respiratory Health

We conducted a retrospective, cross‐sectional study of flooding, mold exposure, remediation, and respiratory symptom prevalence on a random sample of respondents from Bound Brook, New Jersey, a community that received extensive flood damage from Hurricane Floyd in September 1999. Over 3,000 homes were impacted, some with water damage to the second floor. Many required condemnation. In 2001 to 2002 we conducted a randomized telephone survey of 29 families still living in flood‐damaged and repaired homes and 18 families who had not experienced flood damage from Floyd. Flood status was the last question on the interview, leaving the interviewer effectively blinded as to status. Flood damage was a strong predictor of mold growth (p < 0.001), and there was a strong association between flooding and physician‐confirmed respiratory symptoms in the aftermath of the flood (28 of 29 cases vs. 10 of 18 referents; p < 0.001). There was also an association between flood status and continued symptom prevalence in the month prior to the interviews (22 of 29 cases vs. 6 of 18 referents; p < 0.01). Most flooded homes required removal and replacement of various building materials, which was usually delayed for days or weeks pending re‐occupancy. Many occupants participated in the renovation without adequate personal protection. Persons assisting with cleanup work were more likely to report five or more symptoms (p < 0.002). Smokers with mold damage reported five or more symptoms in the 30 days before the interviews, more frequently than nonsmokers with mold damage. These results are consistent with previous reports of flooding, mold, and illness, but demonstrate that self‐remediation of mold (particularly with lack of training and personal protective equipment) and smoking are significant risk factors for mold‐related symptoms. Exposure during cleanup of moldy materials was a significant contributor to symptoms, and recommendations should include more reliance on professionals and enhanced personal protective equipment. © 2013 Wiley Periodicals, Inc.     

Remediation,land use,and risk at Hanford

U.S. Department of Energy (US DOE) remediation responsibilities include the Hanford site in Washington State. Cleanup is governed by the Tri‐Party Agreement (TPA) between the US DOE as the responsible party and the U.S. Environmental Protection Agency and Washington State Department of Ecology as joint regulators. In 2003, the US DOE desired to implement a “Risk‐Based End State” (RBES) policy at Hanford, with remediation measures driven by acceptable risk standards using exposure scenarios based on the 1999 Hanford Comprehensive Land‐Use Plan. Facing resistance from regulators and stakeholders, the US DOE solicited public input on its policy. This led to a Hanford Site End State Vision in 2005 and a commitment that the TPA would continue to control remediation. This article describes how regulator and public participation modified RBES to an end‐state vision. © 2010 Wiley Periodicals, Inc.     

Outdoor Weathering Evaluation of Carbon-Black-Filled, Biodegradable Copolyester as Substitute for Traditionally Used, Carbon-Black-Filled, Nonbiodegradable, High-Density Polyethylene Mulch Films

Carbon-black-filled, biodegradable, copolyester mulch film (Eastar®, or EA, Tennessee Eastman, Kingsport, TN) and commercial carbon-black-filled, high-density polyethylene (HDPE) mulch film were exposed for 12 weeks to commercial vegetable crop growing conditions by being placed directly on irrigated soil in the field of the University of Tennessee Alcoa Highway State Agriculture Experiment Station (Knoxville, TN) and by being placed on a plywood exposure rack as described by the American Society of Testing and Materials (ASTM) Standard Test Method 1435: Outdoor Weathering of Plastics. Mechanical properties and weather information were collected in order to evaluate the feasibility of using the newly developed biodegradable EA mulch film to replace the nonbiodegradable HDPE mulch film. Results indicate that the EA mulch film exhibited favorable tensile strength and elongation-at-break during outdoor exposure rack testing and outdoor, in-field, placed directly on the soil, exposure testing, suggesting biodegradable EA could be a substitute for the HDPE nonbiodegradable material.     

Estimation of nitrogen flow change in Beijing,China, for the years 1995, 2000, and 2004

Rapid economic growth in China has led to environmental pollution. Recycling nutrients is essential for sustainable agriculture, and it is necessary to estimate the amount of available organic resources in order to achieve this. Using nitrogen as a tracer, we estimated the organic resource flows in 1995, 2000, and 2004 in Beijing. The agricultural nitrogen flow was calculated from the fertilizer, agricultural product, and byproduct flows. The livestock nitrogen flow was calculated from the feed, excretion, and stock flows. The human nitrogen flow was calculated from the food intake, excretion, and food waste flows. The amounts of recyclable organic resources were estimated from these nitrogen flows. The Daxing, Fangshan, Miyun, Shunyi, and Tongzho areas had high nitrogen loads in 2004, as did the outer suburbs, but Beijing proper had an extremely low nitrogen flow and the inner suburbs had low nitrogen flows. The estimated amount of compost that could be produced from domestic organic waste across Beijing was equivalent to 88,100 t of nitrogen. The Beijing area contains 394,100 ha of farmland, so, if the compost was applied at an equivalent of 100 kg of nitrogen per hectare, the equivalent of 48,000 t of nitrogen would be surplus.     

Perchlorate: Sources,uses, and occurrences in the environment

Perchlorate contamination of groundwater and soil continues to be a hot topic in many sectors, including industry, the federal Departments of Defense and Energy, regulators, and the general public. This article presents information on what is currently known regarding perchlorate uses, known and suspected naturally occurring versus anthropogenic perchlorate sources, and past and present manufacturing locations. It provides the reader with a baseline as well as background information to facilitate an understanding of perchlorate in the environment for the ultimate purpose of remediation. The article is based on research conducted by the Interstate Technology Regulatory Council for a forthcoming, more substantial perchlorate overview document scheduled for publication later in 2005. The document will include an overview of the chemical and discussions of remediation techniques and methods of analysis. © 2005 Wiley Periodicals, Inc.     

Applied geologic,microbiological, and engineering constraints of in-situ BTEX bioremediation

An in-situ bioremediation project has been designed and constructed for a site in south-central Kansas just north of Wichita. A pipeline leaked an unknown quantity of refinedfuels in the 1970s. The spill was undetected until hydrocarbons were found in a nearby municipal water supply well. Of concern, from a regulatory perspective, are the alkylbenzene components found in the groundwater, including benzene, toluene, ethylbenzene, and xylene (BTEX). Initial abatement procedures, including free product removal and pumping, had become ineffective. In-situ bioremediation was selected to complete the restoration process. The project emphasizes the need for a strong understanding of the geologic and hydrogeologic conditions prevalent under the site. Site studies were conducted to determine the distribution and mass of the contaminant and the hydraulic regime. Laboratory microbial studies were used to determine the efficacy of nitrate as a primary electron acceptor. Information from site studies was used to design a treatment system tailored to the requirements of the site. The treatment system is designed to deliver the maximum amount of nutrient-enriched water to the contaminated zone while maintaining hydraulic control of the site.     

Behavior of As,Cd, Co,Cr, Cu,Pb, Ni,and Zn at the soil/plant interface around an uncontrolled landfill (Casablanca,Morocco)

The present work undertaken in the environmental context aims to study the distribution of heavy metals in plants that grow naturally around uncontrolled landfills. The study's goal was to identify plants that can be used to remediate contaminated soils. For this purpose, 14 plants species and their rhizospheric soil samples were collected and analyzed for arsenic, cadmium, cobalt, chromium, copper, lead, nickel, and zinc by inductively coupled plasma‐atomic emission spectrometry. The results showed the presence of elevated metal concentrations in soil, many exceeding the regulatory values, and that many species exhibited an ability to accumulate multiple metals in their shoots and roots without sustaining toxicity. This was confirmed by bioconcentration and translocation factors generally higher than 1.     

Solidification/stabilization for remediation of wood preserving sites: Treatment for dioxins,PCP, creosote,and metals

This article discusses the use of solidification/stabilization (S/S) to treat soils contaminated with organic and inorganic chemicals at wood preserving sites. Solidification is defined for this article as making a material into a freestanding solid. Stabilization is defined as making the contaminants of concern nonmobile as determined from a leaching test. S/S then combines both properties. For more information on S/S in general the reader should refer to other publications (Connors, J.R. [1990]). Chemical fixation and solidification of hazardous wastes. New York: Van Nostrand Reinhold; US Environmental Protection Agency. [1993a]. Engineering bulletin solidification/stabilization of organics and inorganics (EPA/540/S‐92/015); Wiles, C.C. [1989]. Solidification and stabilization technology. In H.M. Freeman [Ed.], Standard handbook of hazardous waste treatment and disposal. New York: McGraw Hill) as this article addresses only wood preserving sites and assumes basic knowledge of S/S processes. For a more general discussion of wood preserving sites and some other remedial options, the reader may wish to refer to a previous EPA publication (US Environmental Protection Agency. [1992a]. Contaminants and remedial options at wood preserving sites [EPA/600/R‐92/182]). This article includes data from the successful remediation of a site with mixed organic/inorganic contaminants, remediation of a site with organic contaminants, and detailed treatability study results from four sites for which successful formulations were developed. Included are pre‐ and post‐treatment soil characterization data, site vaines. ileizdot‐ names (in some cases), treatment formulas used (generic aridproprietary), costs, recommendations, and citatioiis to inore detailed refer‐ en ces. The data presen ted iiidica te that dioxins, pentachlorophepi 01 (PCP), creosote, polycyclic aromatic hydrocarbom (PAHsI, and metals can be treated at moderate cost by the use of S/S techuologp.     

Treatment technologies for mercury in soil,waste, and water

Mercury occurs naturally in the environment and can be found in elemental (metallic), inorganic, and organic forms. Modern uses for mercury include chemical manufacturing, thermometers, and lighting (mercury vapor and fluorescent lamps). The chemical and allied products industry group is responsible for the largest quantity of mercury used in the United States. Mercury, particularly the organic methylmercury form, is a potent neurotoxin capable of impairing neurological development in fetuses and young children and of damaging the central nervous system of adults. Mercury regulations span multiple federal and state environmental statutes, as well as multiple agency jurisdictions. In August 2007, the U.S. Environmental Protection Agency's (US EPA's) Office of Superfund Remediation and Technology Innovation (OSRTI) published a report titled “Treatment Technologies for Mercury in Soil, Waste, and Water.“ The report identifies eight treatment technologies and 57 projects, 50 of which provide performance data. This information can help managers at sites with mercury‐contaminated media and generators of mercury‐contaminated waste and wastewater to identify proven and effective mercury treatment technologies; screen technologies based on application‐specific goals, characteristics, and costs; and apply experiences from sites with similar treatment challenges. This article provides a synopsis of the US EPA report, which is available at http://clu‐in.org/542R07003 . © 2007 Wiley Periodicals, Inc. *

1 This article is a U.S. Government work and, as such, is in the public domain of the United States of America.

     

Yields of Dissolved Organic C,N, and P. from Three High-Elevation Catchments,Colorado Front Range,U.S.A.

Ecosystem dynamics in high-elevation watersheds are extremely sensitive to changes in chemical, energy, and water fluxes. Here we report information on yields of dissolved organic C, N, and P for the 1999 snowmelt runoff season from three high-elevation catchments in the Colorado Front Range, U.S.A.: Green Lake 4 (GL4) and Albion townsite (ALB) on North Boulder Creek and the Saddle Stream (SS), a tributary catchment dominated by alpine tundra. Dissolved organic carbon (DOC) concentrations in stream waters ranged from <1 to 10 mg C L^-1, with the highest values occurring at the SS site. Dissolved organic nitrogen (DON) concentrations ranged from below detection limits to 0.28 mg N L^-1 and were again highest at the tundra-dominatedsite. Dissolved organic phosphorus (DOP) concentrations were at or near detection limits throughout the season in all three catchments indicating a strong terrestrial retention of P. OnlyDOC showed a significant relationship to discharge. Yields of DOC in the three catchments ranged from 10.6 to 11.8 kg C ha^-1 while yields of DON and DOP ranged from 0.32 to 0.41 and 0.02 to 0.08 kg ha^-1, respectively. The relatively highyield of organic N and P relative to C from the highest elevationsite (GL4) was somewhat surprising and points to either: (1) a source of dissolved organic material (DOM) in the upper reaches of the catchment that is enriched in these nutrients or (2) theselective uptake and processing of organic N and P downstream ofthe sampling site. Additionally, seasonal changes in the relativeimportance of DOM precursor materials appear to result in changesin the N content of DOM at both the GL4 and ALB sites.     

Tensile Strength, Elongation, Hardness, and Tensile and Flexural Moduli of PLA Filled with Glycerol-Plasticized DDGS

Rapid growth of the biofuel industry is generating large amounts of coproducts such as distillers dried grains with solubles (DDGS) from ethanol production and glycerol from biodiesel. Currently these coproducts are undervalued, but they have application in the plastics industry as property modifiers. The objective of this research effort is to quantify the effects on mechanical properties of adding DDGS and glycerol to polylactic acid (PLA). The methodology was to physically mix DDGS, as filler, with PLA pellets and injection mold the blends into test bars using glycerol as a plasticizer. The bars were subject to mechanical testing procedures to obtain tensile strength, tensile and flexural moduli, elongation to break, and surface hardness of blends from 0 to 90?%, by weight, of plasticized filler. Blends were typically relatively brittle with little or no yielding prior to fracture, and the addition of glycerol enabled molding of blends with high levels of DDGS but did not increase strength. Any presence of filler decreased the tensile strength of the PLA, and 20?C30?% filler reduced strength by 60?%. The 35?C50?% filled PLA had about one-fifth the value for pure PLA; at 60?C65?% filler level, about 10?% tensile strength remained; and over 80?% filler, 95?% of the strength was lost. Over 20?% filler, the tensile modulus decreased. The 35?% plasticized, filled blend yielded about one-half the stiffness as the pure PLA case; flexural modulus trended in the same manner but demonstrated a greater loss of stiffness. Most blends had less than 3?% elongation to break while surface hardness measurements indicated that up to 60?% filler reduced Shore D hardness by less than 20?%. The tensile strength and modulus data are consistent with the findings of other researchers and indicate that the type of filler and amount and sequence of plasticization are secondary effects, and the total PLA displaced is the dominant factor in determining the mechanical strength of the PLA and DDGS blends. Up to 65?% plasticized DDGS filler can be injection molded, and sufficient mechanical strength exists to create a variety of products. Such a novel material provides higher-value utilization of the biofuel coproducts of glycerol and DDGS and maintains the biodegradable and biocompatible nature of PLA.     

Health risk assessment of heavy metals (Cr, Ni, Cu, Zn, Cd, Pb) in circumjacent soil of a factory for recycling waste electrical and electronic equipment

The aim of the study was to determine the potential environmental contamination in a typical factory for recycling waste electrical and electronic equipment in Shanghai. Heavy metals (Cr, Ni, Cu, Zn, Cd, Pb) in the soil around the factory have been evaluated in this paper. Compared with the background value, the concentrations of six metals detected in all the samples were higher, which showed that toxic metals were released into soil around the factory. Compared with the Environmental Quality Standards for Soils, China grade III, all the six metals are under soil guidelines. The non-cancer risk in different directions from the factory was in the order of: the north > the west > the south > the east. For inhalation and ingestion, the non-cancer risk in the soil west of the factory was biggest. Nevertheless, the non-cancer risk in the soil north of the factory was the biggest for dermal contact. The trend of cancer risk was the west > the south > the north > the east. The non-cancer risk and the carcinogenic risk for Cr, Ni, and Cd were all below the limiting value. This study might provide a reference for the risk assessment involved in electronic waste management and recycling activities.     

Rehabilitation of the chernoistochinskii drinking water system,Nizhnii Tagil,Russia

The U.S. Environmental Protection Agency (EPA) performed a reservoir diagnosis and developed low-cost recommendations to improve drinking water quality for the city of Nizhnii Tagil, Russia. Despite widespread regional pollution, water quality within the drinking water supply source can be summarized as generally good. Sampling and analysis efforts did not reveal appreciable amounts of hazardous chemicals or metals. The major water quality problem stems from an abundance of blue-green algae during the summer months, causing drinking water taste and odor problems and filter clogging at the water treatment plant. City water treatment officials also frequently experience difficulties with maintaining an effective disinfection residual in the distribution system because it spans more than 30 kilometers in length. Regrowth of microorganisms in the distribution system often causes coliform bacteria counts to exceed standards. The implementation of a watershed protection and management program, and the installation of a new disinfection system, to purify drinking water and to reduce bacterial growth in the distribution system should improve drinking water quality for the city residents.     

Tensile Strength, Elongation, Hardness, and Tensile and Flexural Moduli of Injection-Molded TPS Filled with Glycerol-Plasticized DDGS

Continuing growth of biofuel industries is generating large amounts of coproducts such as distillers dried grains with solubles (DDGS) from ethanol production and glycerol from biodiesel. Currently these coproducts are undervalued, but they have application in the plastics industry as property modifiers. This research effort has quantified the effects on mechanical properties of adding DDGS and glycerol to a commercial thermoplastic starch (TPS). The methodology was to physically mix DDGS, as filler, with the TPS pellets and injection mold the blends into test bars using glycerol as a processing aid. The bars were then mechanically tested with blends from 0 to 65 %, by weight, of plasticized filler. The test bars were typically relatively brittle with little yielding prior to fracture with elongation between 1 and 3 %. The addition of glycerol enabled molding of blends with high levels of DDGS but did not increase strength. Any presence of filler decreased the tensile strength of the starch, and up to 30 % filler, the tensile strength drops about 15 %. The 20 and 50 % blends (without glycerol) have slightly greater stiffness than pure starch. With some other blends, the presence of plasticized filler degrades the tensile modulus with 35 % filler yielding about 1/3 the stiffness. Changes in the flexural modulus are much more pronounced as 20–25 % filled TPS has a 30 % increase in flexural stiffness. In terms of surface hardness, blends up to 60 % filler are within 20 % of the TPS baseline.