Novel Pretreatment Performance Evaluation for Cellulose Nanofibrils Extraction from Ficus natalensis Barkcloth

Recently, nanosized cellulose materials extraction is extensively interesting from the sources of sustainable materials. Cellulose nanofibrils (CNF) extraction through green bio-based materials featured as promising interest in the field of science. In this study, dimethyl sulfoxide (DMSO) was applied to examine its effectiveness in pretreating the Ficus natalensis barkcloth cellulose (FNBC) for CNF production before 2,2,6,6,-tetramethylpiperidine-1-oxyl (TEMPO) oxidation. The pretreatment performance of DMSO was evaluated based on the structural and morphological changes. DMSO pretreated FNBC attained the most dramatic morphological changes as compared to untreated cellulose samples. The results of the scanning electron microscope (SEM) and transmission electron microscope (TEM) shows that there is an extensive structural disruption of FNBC during the pretreatment process, which could be because of outstanding ability to eliminate non-cellulosic materials and amorphous regions from the FNBC, confirmed by the X-ray diffractometry (XRD) showing higher crystallinity values, as well as higher thermal stabilities values of pretreated FNBC samples, were also noted. Overall, this study revealed a tremendously effective and pioneer pretreatment method for fractionating FNBC, to stimulate the successive extraction of cellulose nanofibrils. Furthermore, based on the cellulose and CNF characterizations, this study showed that F. natalensis barkcloth could be considered as an alternative source of cellulose for potential value-added industrial applications such as the food industry, paper making, and biomedicines.

Graphic Abstract

     

Ecological treatment of El Kriymat boiler ash for recovering vanadium,nickel and zinc from sulfate leach liquor

The primary goal of this work is to develop a technology that allows for the recovery of metal values from waste products, thereby promoting the wise and efficient use of our nation's resources. To achieve this goal, an industrial waste of El Kriymat boiler fly Ash was used for recovering its content of vanadium, nickel and zinc. About 97, 95 and 99% respectively of these economic elements were first dissolved from boiler fly ash magnetic concentrate (after physical concentration). Leaching experiments using optimum conditions include: 180 g/L sulfuric acid concentration and 4% solid/solid proportion manganese dioxide acts as an oxidant at 80 °C. The recovery of vanadium (V) metal ions was carried out using 3% Alamine 336 in kerosene at an equilibrium pH value of 0.9. Subsequently, 15% sodium sulfide solution was used for co-precipitation of nickel and zinc metal ions in the raffinate solution at pH value of 3.5.

Graphical Abstract

     

Production of artificial aggregates by granulation and carbonation of recycled concrete fines

There is a growing need to find ways to reuse fine concrete waste from the construction industry. In this study, recycled concrete fines were granulated and used as lightweight aggregates. Ladle slag, a steel industry residue, was used as a co-binder in different ratios (0, 10, 20, and 30%). The materials were blended and granulated, and then the granules were cured in three conditions: ambient condition, humidity chamber, and carbonation chamber. The results showed that the ladle slag content of 30% cured in a humidity chamber produced the strongest granules, with a crushing strength of 127 N, which was 135% greater than a commercial lightweight aggregate. The granules generally had satisfactory density and water absorption with a higher ladle slag content. Carbonation increased the granule strength with a low ladle slag content and decreased the granules’ water absorption. The improved physical and mechanical properties of carbonated granules are attributed to the formation of calcium carbonate during the carbonation process. The granules produced in this study show good potential for use as lightweight aggregates in the construction industry.

Graphical abstract

     

Estimating uncertainties in the life cycle assessment of composting household biowaste and urban green waste in Germany

Life cycle assessment (LCA) of waste treatment processes is often associated with considerable uncertainties. The aim of this study is to estimate the total uncertainty in the modelled composting system and the influence of material and process parameters on the uncertainty. Four composting combinations with fresh (FC) and mature substrate compost (MSC) from partially enclosed (PEC) and open composting (OC) were investigated. Perturbation analysis was used to determine the effect of parameters on the result and Monte Carlo simulation was used to estimate the total uncertainty. This study showed that the production of MSC using PEC had the lowest overall impacts across all impact categories except ozone depletion. Results of the Monte Carlo simulation showed that comparing composting options was challenging. The sensitivity ratios obtained from the perturbation analysis showed that the process parameter percentage of carbon fraction degraded was the most influential for FC. In MSC, the moisture content in the input material and the substitution factor used for peat were the most influential. Monte Carlo simulations demonstrated the overall uncertainty of the model and its relevance when comparing results between combinations. The perturbation analysis identified the parameters that required more accurate data to reduce the uncertainty in the model.

Graphical abstract

     

Utilization of alum sludge waste for production of eco-friendly blended cement

This work was focused on evaluating the suitability of replacing Portland cement (PC) by 5, 10 and 15 mass % of activated alum sludge waste (AAS) as a pozzolanic material. Exploitation of low-cost nanocomposite for bolstering the physical, mechanical, and stability against firing of PC–AAS-hardened composites was inspected. CuFe₂O₄ spinel nanoparticle with average particle size (~ 50 nm) was prepared. Inclusion of CuFe₂O₄ spinel in different PC–AAS-hardened composites bolsters their physicomechanical features at almost normal curing ages as well as their stability against firing. The positive impact of synthesized CuFe₂O₄ spinel was affirmed via TGA/DTG and XRD techniques, which indicated the presence of diverse hydration yields such as CSHs, CASHs, CFSH, and CuSH that enhance the overall physicomechanical characteristics and thermal stability of various PC–AAS-hardened composites. The composite containing (90 PC–10 AAS waste–2 CuFe₂O₄) offers many benefits from the economic and environmental view.

Graphical abstract

     

Alkoxy-silyl Induced Agglomeration: A New Approach for the Sustainable Removal of Microplastic from Aquatic Systems

The substance class of inert organic-chemical stressors (IOCS) describes organic-chemical (macro-) molecules, which demonstrate a high level of persistence upon entry in the ecosystem, and whose degradation is limited. These synthetically produced organic-chemical macromolecules, which are often derived from the polymerization of different monomers, are, in the form of plastics, indispensable in the everyday world. They enter the environmental compartments and cause great damage due to primary (industry, cosmetic, washing of textile), and secondary (degradation) entry. If these particles get into aquatic systems, this has fatal consequences for the ecosystem such as the death of marine animals, or bioaccumulation. Wastewater treatment plants are reaching their limits and require innovative ideas for the sustainable removal of microplastic. This article examines a new approach to the removal of polymers from aquatic systems (lab scale) by using sol–gel induced agglomeration reactions to form larger particle agglomerates. These enlarged agglomerates can be separated much more easily from the wastewater, since they float on the water surface. Separation systems, e.g. sand trap can easily be used. A further advantage is that the agglomeration can be carried out completely independently of the type, size, and amount of the trace substance concentration as well as of the external influences (pH value, temperature, pressure). Thus, this new type of particle separation can not only be used in sewage treatment plants, but can also be transferred to decentralized systems (e.g. implementation in industrial processes).

Graphical Abstract

Open image in new window

     

A simplified material flow analysis employing local expert judgment and its impact on uncertainty

Material flow analysis (MFA) is an effective tool for waste management, but low- and middle-income countries lack essential data for MFA. This study proposed a simplified MFA (sMFA) utilizing local expert judgment (LEJ) and examining the impact of simplification on its uncertainty. A stochastic sMFA model was developed for nitrogen and phosphorus in urban Mandalay, Myanmar. This model was compared with the intensive MFA (iMFA) model employing intensive surveys for primary data collection. For the total loadings to the environment, the medians of the sMFA were higher by 3% and 11%, respectively, for nitrogen and phosphorus than those of the iMFA. The widths of the 80% confidence intervals of these loadings in the sMFA, normalized by those in the iMFA, were − 0.05 and − 0.11, respectively. The three largest flows to the environment were the same for the two models: on-site sanitation effluent/leakage, greywater, and industrial wastewater. Large median gaps between the models were observed for industrial wastewater, fecal sludge, and human excreta, associated with informal waste management, whereby LEJ did not work well. Overall, the sMFA demonstrated a good estimation of nitrogen and phosphorus flows with limited increase of uncertainty, still requiring focused attention on informal waste streams.

Graphical abstract

     

Acid Rain in Downtown São Paulo City, Brazil

During the period from July 2002 to June 2004, the chemical characteristics of the rainwater samples collected in downtown São Paulo were investigated. The analysis of 224 wet-only precipitation samples included pH and electrical conductivity, as well as major ions (Na⁺, $ \rm NH^{ + }_{4} During the period from July 2002 to June 2004, the chemical characteristics of the rainwater samples collected in downtown S?o Paulo were investigated. The analysis of 224 wet-only precipitation samples included pH and electrical conductivity, as well as major ions (Na⁺, , K⁺, Ca²⁺, Mg²⁺, Cl⁻, , ) and carboxylic acids (acetic, formic and oxalic) using ion chromatography. The volume weighted mean, VWM, of the anions , and Cl⁻ was, respectively, 20.3, 12.1 and 10.7 μmol l⁻¹. Rainwater in S?o Paulo was acidic, with 55% of the samples exhibiting a pH below 5.6. The VWM of the free H⁺ was 6.27 μmol l⁻¹), corresponding to a pH of 5.20. Ammonia (NH₃), determined as (VWM = 32.8 μmol l⁻¹), was the main acidity neutralizing agent. Considering that the H⁺ ion is the only counter ion produced from the non-sea-salt fraction of the dissociated anions, the contribution of each anion to the free acidity potential has the following profile: (31.1%), (26.0%), CH₃COO⁻ (22.0%), Cl⁻ (13.7%), HCOO⁻ (5.4%) and (1.8%). The precipitation chemistry showed seasonal differences, with higher concentrations of ammonium and calcium during autumn and winter (dry period). The marine contribution was not significant, while the direct vehicular emission showed to be relevant in the ionic composition of precipitation.     

Nutrient Dynamics in Jiaozhou Bay

Three cruises were carried out in Jiaozhou Bay (JZB) in the neap tide in October 2002 (fall) and in both neap and spring tides in May 2003 (spring) to understand the relative importance of external nutrient inputs versus physical transport and internal biogeochemical processes. Nutrients (, , , , silicic acid, total dissolved nitrogen (TDN) and phosphorus (TDP), dissolved organic nitrogen (DON) and phosphorus (DOP)) were measured. The concentrations of nutrients were higher in the northern part than in the southern part. High concentrations of and DON in JZB demonstrated the anthropogenic input. Ambient nutrient ratios indicated that the potential limiting nutrients for phytoplankton growth were silicon, and then phosphorus. Nutrients showed an obvious tidal effect with low values at flood tide and high values at ebb tide. Nutrient elements were transported into JZB in the north and output in the south (i.e., into the Yellow Sea), which varied with season, tidal cycle and investigation sites. Water exchange between JZB and the Yellow Sea exports , and DON out of JZB, while it inputs , silicic acid and DOP into JZB. Nutrient budgets demonstrate that riverine input and wastewater discharge are major sources of nutrients, while residual flow is of minor importance in JZB ecosystem. JZB is a sink for the nutrient elements we studied except for DON. Stoichiometric calculations demonstrate that JZB is a net autotrophic system.     

Nitrogen Saturation of Terrestrial Ecosystems: Some Recent Findings and Their Implications for Our Conceptual Framework

The consequences of nitrogen (N) enrichment for terrestrial and freshwater ecosystems are of increasing concern in many areas due to continued or increasing high emission rates of reactive N. Within terrestrial ecosystems various conceptual frameworks and modelling approaches have been developed which have enhanced our understanding of the sequence of changes associated with increased N availability and help us predict their future impacts. Here, some recent findings are described and their implications for these conceptual frameworks and modelling approaches discussed. They are: (a) an early loss of plant species that are characteristic of low N conditions as N availability increases and a loss of species with high N retention efficiencies (so called N ‘filters’), (b) suppression of microbial immobilisation of deposited due to increased availability in the early stages of N saturation, (c) the early onset of leaching due to these changes (a and b above) in both plant and microbial functioning, (d) reduced sensitivity of vegetation to N additions in areas with high historical N deposition, (e) delayed changes in soil C:N changes due to increased net primary productivity and reduced decomposition of soil organic matter. Some suggestions of early indicators of N saturation are suggested (occurrence of mosses; ratio in surface soils) which indicate either a shift in ecosystem function and/or structure.     

Synthesis of a block copolymer of poly(3-hydroxybutyrate) and poly(ethylene glycol) and its application to biodegradable polymer blends

A block copolymer {P[(R,S)-HB-b-EG]} of atactic poly[(R,S)-3-hydroxybutyrate] {P[(R,S)-HB]} and poly(ethylene glycol) (PEG) was prepared by the ring-opening polymerization of -butyrolactone in the presence of a macroinitiator (PEG/ZnEt₂/H₂O) which had been produced by the reaction of ,-dihydroxy PEG ( _n=3000) with ZnEt₂/H₂O (1/0.6) catalyst. The block copolymer ( _n=10,500, _w/ _n=1.2) was an A-B-A triblock copolymer comprising atactic P[(R,S)-HB] (A) and PEG (B) segments. The miscibility, physical properties, and biodegradability of binary blends of microbial poly[(R)-3-hydroxybutyrate] {P[(R)-HB]} with the block copolymer P[(R,S)-HB-b-EG] has been studied. The glass-transition temperature (T _g) data showed that the P[(R)-HB]/P[(R,S)-HB-b-EG] blend was miscible in the amorphous state. The P[(R)-HB] film became flexible and tough by means of blending with P[(R,S)-HB-b-EG] block copolymer. The enzymatic degradation of blend films was carried out at 37°C and pH 7.4 in a 0.1M phosphate solution of an extracellular PHB depolymerase fromAlcaligenes faecalis. The enzymatic degradation took place solely on the surface of the blend films.     

Acidification at Plastic Lake,Ontario: Has 20 Years Made a Difference?

In response to reduced sulphur emissions, there has been a large decrease in sulphate (; −0.97 μeq l⁻¹ year⁻¹) and hydrogen (−1.18 μeq l⁻¹ year⁻¹) ion concentration in bulk precipitation between 1980 and 2000 at Plastic Lake in central Ontario. The benefit of this large reduction in deposition on stream water chemistry was assessed using the gauged outflow from a conifer-forested catchment (PC1; 23.3 ha), which is influenced by a small wetland located immediately upstream of the outflow. Sulphate concentrations declined, but not significantly due to large inter-annual variation in concentration. Between 1980 and 2000, there were significant increases in dissolved organic carbon, ammonium and potassium concentration likely reflecting increased mineralisation in the wetland. Calcium concentrations in PC1 decreased during the two decade period (−2.24 μeq l⁻¹ year⁻¹), as a consequence there was no improvement in stream pH and the Ca:Al ratio in PC1 continued to decline. A similar response was noted in an upland-draining sub-catchment of PC1-08 that has been monitored since 1987. Despite large reductions in deposition and almost complete retention of nitrogen in soil, there has been no improvement (in terms of pH) in stream water at PC1 due to a combination of soil acidification and climatic (droughts, increased mineralisation) perturbations.     

Trends in Chemical Composition of Wet-only Precipitation at Rural French Monitoring Stations Over the 1990–2003 Period

The long-term monitoring of precipitation and its chemical composition are important for identifying trends in rain quality and for assessing the effectiveness of pollution control strategies. A statistical test has been used to the atmospheric concentrations measured in the French rural monitoring network (MERA) in order to bring out spatio-temporal trends in precipitation quality in France over the period 1990–2003. The non-parametric Mann–Kendall test which has been developed for detecting and estimating monotonic trends in the time series was used and applied in our study at annual values of wet-only precipitation concentrations. The emission data suggest that SO₂ and NO _x emissions decreased (−3.3 and −2.0% year⁻¹, respectively) contrary to NH₃ emissions that increased slightly (+0.2% year⁻¹) over the period 1990–2002 in France. On the national scale, the pH values have a significant decreasing trend of −0.025 ± 0.02 unit pH year⁻¹. and concentrations in precipitation have a significant decreasing trend, −3.0 ± 1.6 and −3.3 ± 0.6% year⁻¹, respectively, corresponding with the downward trends in SO₂ emissions in France (−3.3% year⁻¹). A good correlation (R ² = 0.84) between SO₂ emissions and concentrations was obtained. The decreasing trend of was more significant (−5.4 ± 5.2% year⁻¹) than that of (−1.3 ± 2.4% year⁻¹). Globally, the concentration of the major ions showed a clear downward trend including marine and alkaline ions. In addition, the relative contribution of HNO₃ to acidity precipitation increased by 51% over the studied period.     

Size Distribution of Inorganic Species and Their Inhaled Dose in a Detergent Industrial Workplace

Aerosol particles in the workplace of a detergent industry were sampled during July 2005 by a Berner low-pressure impactor. The samples were analyzed by atomic absorption spectrometry and ion chromatography in order to determine the size distribution of metallic elements and water-soluble inorganic ions. The size distributions of some characteristic metallic elements (Cu, Fe, Al) were unimodal with their maximum found in coarse particles. Among the water-soluble aerosol components , , Cl⁻, and Ca⁺⁺ were the major contributors to total particle mass. The lung deposition resulting from the partially hygroscopic aerosol is estimated. The calculated lung deposition reveals the impact of separate chemical aerosol compounds on the levels of the inhaled dose. The differences observed between the total and regional deposition of the different compounds appear mainly due to their different size distributions. An erratum to this article can be found at     

Long-term Trends in Surface Water Quality of Five Lakes in Japan

Since 1983, the Ministry of the Environment of Japan has conducted nation-wide acid deposition surveys. To investigate the effects of acid deposition on surface water, we used the nonparametric Mann–Kendall test to find temporal trends in pH, alkalinity, and electrical conductivity (EC) in more than 10 years of data collected from five lakes and their catchments (Lake Kuttara: northernmost; Lake Kamakita: near Tokyo; Lake Ijira: central; Lake Banryu: western; and Lake Unagiike: southernmost). The pH of Lake Ijira water has declined slightly since the mid-1990s, corresponding with the downward trends seen in the pH and alkalinity of the river water flowing into the lake. There were significant upward trends in the EC of both the lake and stream water; the same trends were also found for concentrations. These trends show evidence of acidification due to atmospheric deposition, and this is the first such finding in Japan based on significant long-term trends. Lake Ijira is located about 40 km north of the Chukyo industrial area near Nagoya. The annual depositions of H⁺, nss-, and in Lake Ijira were among the highest of all deposition monitoring sites, suggesting that this is the main cause of the significant acidification observed in Lake Ijira. No significant trends suggesting acidification were observed in any of the other lake catchments in spite of the significant upward trends in EC. Upward trends in pH and alkalinity at Lake Banryu and upward trends in alkalinity at Lake Kamakita were detected, but no change in pH or alkalinity at Lake Kuttara and Lake Unagiike was observed.     

Itaconic Acid Grafted Starch Hydrogels as Metal Remover: Capacity,Selectivity and Adsorption Kinetics

Hydrogels were synthesized by free radical graft copolymerization of itaconic acid (IA) onto corn starch (S-g-IA). For this purpose, potassium permanganate (KMnO₄)-sodium bisulfite (NaHSO₃) was used as redox initiation system. The formation of grafted starches was confirmed by Fourier transform infrared spectroscopy, wide angle X-ray scattering, thermogravimetric analysis and scanning electron microscopy. The effect of monomer concentration, neutralization, addition of crosslinking agent, N,N-bismetilenacrilamide (MBAm), and initiator concentration on grafting efficiency and adsorption capacity of the starch hydrogels was investigated. It was demonstrated that the introduction of carboxyl and carbonyl groups promoted starch hydration and swelling. Grafting degree increased with the decrease of monomer concentration, increase of initiator concentration, grade of neutralization and the addition of MBAm without neutralization. Remarkably the resulting materials exhibited water absorption capacities between 258 and 1878% and the ability to adsorb metal ions. It was experimentally confirmed the metal uptake, obtaining the higher adsorption capacity (q _e  = 35 mg/g) for the product prepared with the pre-oxidation and lower initiator concentration. The removal capacity order was Pb²⁺>Ni²⁺>Zn²⁺>Cd²⁺. Moreover, the experimental kinetic and the equilibrium adsorption data for Ni²⁺ and Pb²⁺ were best fitted to the pseudo-second order and Freundlich isotherm models, respectively. This work describes for the first time the preparation of metal removal hydrogels based on starch and itaconic acid using the pair redox system KMnO₄/NaHSO₃, which avoids the starch hydrolysis and allows itaconic acid grafting incorporation without the requirement of more reactive comonomers.     

Molecular Weight Changes and Polymeric Matrix Changes Correlated with the Formation of Degradation Products in Biodegraded Polyethylene

The molecular weight changes in abiotically and biotically degraded LDPE and LDPE modified with starch and/or prooxidant were compared with the formation of degradation products. The samples were thermooxidized for 6 days at 100°C to initiate degradation and then either inoculated with Arthobacter paraffineus or kept sterile. After 3.5 years homologous series of mono- and dicarboxylic acids and ketoacids were identified by GC-MS in abiotic samples, while complete disappearance of these acids was observed in biotic environments. The molecular weights of the biotically aged samples were slightly higher than the molecular weights of the corresponding abiotically aged samples, which is exemplified by the increase in from 5200 g/mol for a sterile sample with the highest amount of prooxidant to 6000 g/mol for the corresponding biodegraded sample. The higher molecular weight in the biotic environment is explained by the assimilation of carboxylic acids and low molecular weight polyethylene chains by microorganisms. Assimilation of the low molecular weight products is further confirmed by the absence of carboxylic acids in the biotic samples. Fewer carbonyls and more double bonds were seen by FTIR in the biodegraded samples, which is in agreement with the biodegradation mechanism of polyethylene.     

Modelling and Optimization of Uranium (VI) Ions Adsorption Onto Nano-ZnO/Chitosan Bio-composite Beads with Response Surface Methodology (RSM)

Nano-ZnO-chitosan bio-composite beads were prepared for the sorption of \({\text{UO}}_{2}^{{2+}}\) from aqueous media. The resulting nano-ZnO/CTS bio-composite beads were characterized by TEM, XRD etc. The sorption of \({\text{UO}}_{2}^{{2+}}\) by bio-composite beads was optimized using RSM. The correlation between four variables was modelled and studied. According to RSM data, correlation coefficients (R²?=?0.99) and probability F-values (F?=?2.24?×?10^??10) show that the model fits the experimental data well. Adsorption capacity for nano-ZnO/CTS bio-composite beads was obtained at 148.7 mg/g under optimum conditions. The results indicate that nano-ZnO/CTS bio-composite beads are appropriate for the adsorption of \({\text{UO}}_{2}^{{2+}}\) ions from aqueous media. Also, the suitability of adsorption values to adsorption isotherms was researched and thermodynamic data were calculated.     

Potential of <Emphasis Type="Italic">pinhão</Emphasis> Coat as Constituents of Starch Based Films Using Modification Techniques

The potential of lignocellulosic fibers obtained by dry grinding of pinhão coat as fillers in starch filmogenic solutions for packaging applications was evaluated in this work. To improve the incorporation of this waste into the starch solutions different physical and chemical treatments were conducted. Thereafter, morphology, chemical structure, crystallinity and water absorption of the pinhão coat powders were determined. The composites were also characterized regarding their morphology, chemical structure, crystallinity, mechanical properties, water vapor permeability and hydrophilicity. Poor fiber/matrix adhesion and high water absorption of the fibers were evidenced. Consequently, water vapor permeability of composites was increased by incorporating the fibers. Moreover, mechanical properties were improved and the morphological results were used to support the water absorption differences among the powders. Regarding the food packaging applications, starch/pinhão coat composites appeared as promising materials to reach the requirements of respiring food products.