Trends in Fish Community Structure,Biomass, and Production in Three Algoma,Ontario, Lakes

Long-term (i.e. >10 years) whole community fish dataincluding catch-per-unit-effort, abundance, biomass, andproduction from three lakes were used: 1) to examine variabilityin fish population and community measures among years using wholelake assessments of fish populations derived from mark recaptureexperiments, 2) to assess implications arising from monitoringindividual species vs. the whole fish community, and 3) toascertain whether, in fisheries assessments (science) a commonlyused surrogate measure, [catch-per-unit-effort (CPUE)] reflectedannual changes in the fish assemblage, and thus may be a goodestimator of abundance. High, long-term variability was evident in the abundance andbiomass of a fish species in our lakes, yet the communityremained relatively stable in terms of its biomass andproduction. Changes in total fish community biomass appear drivenby large species, which, relative to small fish species, remainstable among years. Among years, species richness remainedstable; however, fish species changed in the community. AnnualCPUE was found to be a suitable surrogate for abundance (N) ofsmall fishes; CPUE x mean weight of the catch (bCPUE) was asuitable surrogate for biomass (B) of large fishes. Prior toconcluding that a change in a fish population has occurred as aresult of a stressor, care must be taken to critically examinethe level of population assessment in order to avoid acceptingpotentially invalid conclusions.     

Behaviour of Cd,Cr, Mn,Ni, Pb,and Zn in sewage sludge incineration by fluidised bed furnace

Cd, Cr, Mn, Ni, Pb, and Zn behaviour during sewage sludge incineration was investigated in seven pilot tests using a circulating fluidised bed furnace. Dewatered sludge at a solids concentration of 15-18% was fed to the furnace either alone (two tests) or spiked with chlorinated organic compounds (five tests). The behaviour of metals in the fluidised bed furnace was studied by comparing metal concentrations in the two main ash streams: ash separated from the cyclone immediately following the fluidised bed furnace, and fly ash recovered in the final bag filter. A metal enrichment factor was defined as the ratio of metal concentration between filter ash and cyclone ash. Only Cd and Pb showed any significant enrichment. Their enrichment factors were mainly affected by chlorine concentration in the feed sludge. To check whether simple equilibrium models may explain and predict metal behaviour, experimental data were compared with percentage of the metal vaporisation in the combustion chamber predicted using a thermodynamic model. Discrepancies between model predictions and experimental results are accounted for by considering that kinetics may be a limiting factor in the formation of metal chloride gaseous species. Due to the very short sludge residence time in the fluidised bed furnace, the gaseous compounds have little chance to evolve completely.     

Perchlorate: Sources,uses, and occurrences in the environment

Perchlorate contamination of groundwater and soil continues to be a hot topic in many sectors, including industry, the federal Departments of Defense and Energy, regulators, and the general public. This article presents information on what is currently known regarding perchlorate uses, known and suspected naturally occurring versus anthropogenic perchlorate sources, and past and present manufacturing locations. It provides the reader with a baseline as well as background information to facilitate an understanding of perchlorate in the environment for the ultimate purpose of remediation. The article is based on research conducted by the Interstate Technology Regulatory Council for a forthcoming, more substantial perchlorate overview document scheduled for publication later in 2005. The document will include an overview of the chemical and discussions of remediation techniques and methods of analysis. © 2005 Wiley Periodicals, Inc.     

Outdoor Weathering Evaluation of Carbon-Black-Filled, Biodegradable Copolyester as Substitute for Traditionally Used, Carbon-Black-Filled, Nonbiodegradable, High-Density Polyethylene Mulch Films

Carbon-black-filled, biodegradable, copolyester mulch film (Eastar®, or EA, Tennessee Eastman, Kingsport, TN) and commercial carbon-black-filled, high-density polyethylene (HDPE) mulch film were exposed for 12 weeks to commercial vegetable crop growing conditions by being placed directly on irrigated soil in the field of the University of Tennessee Alcoa Highway State Agriculture Experiment Station (Knoxville, TN) and by being placed on a plywood exposure rack as described by the American Society of Testing and Materials (ASTM) Standard Test Method 1435: Outdoor Weathering of Plastics. Mechanical properties and weather information were collected in order to evaluate the feasibility of using the newly developed biodegradable EA mulch film to replace the nonbiodegradable HDPE mulch film. Results indicate that the EA mulch film exhibited favorable tensile strength and elongation-at-break during outdoor exposure rack testing and outdoor, in-field, placed directly on the soil, exposure testing, suggesting biodegradable EA could be a substitute for the HDPE nonbiodegradable material.     

Health risk assessment of heavy metals (Cr, Ni, Cu, Zn, Cd, Pb) in circumjacent soil of a factory for recycling waste electrical and electronic equipment

The aim of the study was to determine the potential environmental contamination in a typical factory for recycling waste electrical and electronic equipment in Shanghai. Heavy metals (Cr, Ni, Cu, Zn, Cd, Pb) in the soil around the factory have been evaluated in this paper. Compared with the background value, the concentrations of six metals detected in all the samples were higher, which showed that toxic metals were released into soil around the factory. Compared with the Environmental Quality Standards for Soils, China grade III, all the six metals are under soil guidelines. The non-cancer risk in different directions from the factory was in the order of: the north > the west > the south > the east. For inhalation and ingestion, the non-cancer risk in the soil west of the factory was biggest. Nevertheless, the non-cancer risk in the soil north of the factory was the biggest for dermal contact. The trend of cancer risk was the west > the south > the north > the east. The non-cancer risk and the carcinogenic risk for Cr, Ni, and Cd were all below the limiting value. This study might provide a reference for the risk assessment involved in electronic waste management and recycling activities.     

Residential Flood Damage After Hurricane Floyd,Mold, Household Remediation,and Respiratory Health

We conducted a retrospective, cross‐sectional study of flooding, mold exposure, remediation, and respiratory symptom prevalence on a random sample of respondents from Bound Brook, New Jersey, a community that received extensive flood damage from Hurricane Floyd in September 1999. Over 3,000 homes were impacted, some with water damage to the second floor. Many required condemnation. In 2001 to 2002 we conducted a randomized telephone survey of 29 families still living in flood‐damaged and repaired homes and 18 families who had not experienced flood damage from Floyd. Flood status was the last question on the interview, leaving the interviewer effectively blinded as to status. Flood damage was a strong predictor of mold growth (p < 0.001), and there was a strong association between flooding and physician‐confirmed respiratory symptoms in the aftermath of the flood (28 of 29 cases vs. 10 of 18 referents; p < 0.001). There was also an association between flood status and continued symptom prevalence in the month prior to the interviews (22 of 29 cases vs. 6 of 18 referents; p < 0.01). Most flooded homes required removal and replacement of various building materials, which was usually delayed for days or weeks pending re‐occupancy. Many occupants participated in the renovation without adequate personal protection. Persons assisting with cleanup work were more likely to report five or more symptoms (p < 0.002). Smokers with mold damage reported five or more symptoms in the 30 days before the interviews, more frequently than nonsmokers with mold damage. These results are consistent with previous reports of flooding, mold, and illness, but demonstrate that self‐remediation of mold (particularly with lack of training and personal protective equipment) and smoking are significant risk factors for mold‐related symptoms. Exposure during cleanup of moldy materials was a significant contributor to symptoms, and recommendations should include more reliance on professionals and enhanced personal protective equipment. © 2013 Wiley Periodicals, Inc.     

Atmospheric Metal Pollutants-Archives, Methods, and History

Pollution of the atmosphere with cadmium (Cd), mercury (Hg), and lead (Pb) is a consequence of human activities. Natural archives are necessary to reconstruct the long-term history of metal deposition because accurate measurement of atmospheric deposition is a recent accomplishment. Reconstructions require: (1) accurate determination of concentrations of elements and isotopes, (2) accurate chronology of archives, and (3) archives that faithfully record atmosphere deposition. The most useful long-term archives are accumulations of ice and snow, peat, and lake sediment. Quantification of Cd deposition is uncommon because of its low concentration and substantial chemical mobility. Nonetheless, trends in peat and lake sediment are similar to those of Hg and Pb since ca. 1800 a.d. Both Hg and Pb are relatively chemically immobile and thus the peat and lake archives are believed to record historic trends of atmospheric deposition. Isotopic and concentration studies of Pb indicate a history of northern hemisphere atmospheric pollution extending back prior to 0 a.d. Although measurements of Hg concentration are now routine, isotopic measurements are in their infancy. Some Hg pollution sources have unique isotopic ratios, thereby contributing unique signals to the total Hg. Maximum accumulation rates of Hg and Pb occur up to 10 years later than for Cd (1970s versus 1960s in eastern North America, perhaps slightly later in Europe). By 2004, deposition of Cd, Hg, and Pb had declined from peak values in eastern North America more than 75, 75, and 90%, respectively.     

Clay, Phosphate Adsorption, Dispersion, and Rheology

Soluble phosphate is a common ingredient of fertilizer used in agriculture production all over the world. This chemical mixed with soil is transported into the water and marine environment via rainfall causing a range of environmental problems such as toxic algae bloom. Kaolin clay is a common material found in soil and is used as a model system to understand the effects of phosphate adsorption on the flocculation/dispersion of the clay slurries. In the topics, torrential downpours are common. The large water flow will easily disperse the unflocculated or weakly flocculated sediments over a wide area including river and marine environments. Phosphate adsorption was found to weaken the interparticle forces between clay platelets in the slurries. At high enough concentration, it will completely deflocculate the clay slurries, i.e. the net interparticle force is repulsive. A deflocculated slurry is characterised by a low viscosity and no yield stress. As a result, it is much easier to disperse this slurry over a wide area possible even in a small downpour. This study will present the flow and yield stress behaviour of kaolin clay slurries under the influence of adsorbed phosphate.     

Integrated Environmental and Hydraulic Design of Xerias River,Corinthos, Greece,Training Works

The modern design of flood protection and training works in cases of major natural streams and creeks, requires a fine balance between a sound engineering approach in all engineering aspects on one hand, and an environmentally acceptable solution on the other. Progress in integrating environmental and hydraulic design has been achieved over the years due to different factors, like proper collaboration of engineering disciplines, hydraulic modeling enhancement, development and use of suitable materials, amelioration of the construction methods, and proper restoration and use of the affected areas. In this paper, a synopsis of the experience that has been gained by our firm over the years in designing flood protection and river training works for urban and rural areas is presented, including the general design principles to be used as guidelines, and illustrated with the case study of river Xerias, Greece. The river Xerias is located in Peloponnese, Greece. It flows from south to north and has a catchment area of 170 km². For the last 1500 m before discharging into the Corinthian gulf, the river flows through the city of Corinthos. This is the reach, which overflowed and flooded the city during the January 1997 flood, causing a lot of damage and human life casualties.     

Toxicity potentials from waste cellular phones,and a waste management policy integrating consumer,corporate, and government responsibilities

Cellular phones have high environmental impact potentials because of their heavy metal content and current consumer attitudes toward purchasing new phones with higher functionality and neglecting to return waste phones into proper take-back systems. This study evaluates human health and ecological toxicity potentials from waste cellular phones; highlights consumer, corporate, and government responsibilities for effective waste management; and identifies key elements needed for an effective waste management strategy. The toxicity potentials are evaluated by using heavy metal content, respective characterization factors, and a pathway and impact model for heavy metals that considers end-of-life disposal in landfills or by incineration. Cancer potentials derive primarily from Pb and As; non-cancer potentials primarily from Cu and Pb; and ecotoxicity potentials primarily from Cu and Hg. These results are not completely in agreement with previous work in which leachability thresholds were the metric used to establish priority, thereby indicating the need for multiple or revised metrics. The triple bottom line of consumer, corporate, and government responsibilities is emphasized in terms of consumer attitudes, design for environment (DfE), and establishment and implementation of waste management systems including recycling streams, respectively. The key strategic elements for effective waste management include environmental taxation and a deposit-refund system to motivate consumer responsibility, which is linked and integrated with corporate and government responsibilities. The results of this study can contribute to DfE and waste management policy for cellular phones.     

Applied geologic,microbiological, and engineering constraints of in-situ BTEX bioremediation

An in-situ bioremediation project has been designed and constructed for a site in south-central Kansas just north of Wichita. A pipeline leaked an unknown quantity of refinedfuels in the 1970s. The spill was undetected until hydrocarbons were found in a nearby municipal water supply well. Of concern, from a regulatory perspective, are the alkylbenzene components found in the groundwater, including benzene, toluene, ethylbenzene, and xylene (BTEX). Initial abatement procedures, including free product removal and pumping, had become ineffective. In-situ bioremediation was selected to complete the restoration process. The project emphasizes the need for a strong understanding of the geologic and hydrogeologic conditions prevalent under the site. Site studies were conducted to determine the distribution and mass of the contaminant and the hydraulic regime. Laboratory microbial studies were used to determine the efficacy of nitrate as a primary electron acceptor. Information from site studies was used to design a treatment system tailored to the requirements of the site. The treatment system is designed to deliver the maximum amount of nutrient-enriched water to the contaminated zone while maintaining hydraulic control of the site.     

Treatment technologies for mercury in soil,waste, and water

Mercury occurs naturally in the environment and can be found in elemental (metallic), inorganic, and organic forms. Modern uses for mercury include chemical manufacturing, thermometers, and lighting (mercury vapor and fluorescent lamps). The chemical and allied products industry group is responsible for the largest quantity of mercury used in the United States. Mercury, particularly the organic methylmercury form, is a potent neurotoxin capable of impairing neurological development in fetuses and young children and of damaging the central nervous system of adults. Mercury regulations span multiple federal and state environmental statutes, as well as multiple agency jurisdictions. In August 2007, the U.S. Environmental Protection Agency's (US EPA's) Office of Superfund Remediation and Technology Innovation (OSRTI) published a report titled “Treatment Technologies for Mercury in Soil, Waste, and Water.“ The report identifies eight treatment technologies and 57 projects, 50 of which provide performance data. This information can help managers at sites with mercury‐contaminated media and generators of mercury‐contaminated waste and wastewater to identify proven and effective mercury treatment technologies; screen technologies based on application‐specific goals, characteristics, and costs; and apply experiences from sites with similar treatment challenges. This article provides a synopsis of the US EPA report, which is available at http://clu‐in.org/542R07003 . © 2007 Wiley Periodicals, Inc. *

1 This article is a U.S. Government work and, as such, is in the public domain of the United States of America.

     

Active capping demonstration in the Anacostia river,Washington, D.C.

An active capping demonstration project in Washington, D.C., is testing the ability to place sequestering agents on contaminated sediments using conventional equipment and evaluating their subsequent effectiveness relative to conventional passive sand sediment caps. Selected active capping materials include: (1) AquaBlokTM, a clay material for permeability control; (2) apatite, a phosphate mineral for metals control; (3) coke, an organic sequestration agent; and (4) sand material for a control cap. All of the materials, except coke, were placed in 8,000‐ft test plots by a conventional clamshell method during March and April 2004. Coke was placed as a 1.25‐cm layer in a laminated mat due to concerns related to settling of the material. Postcap sampling and analysis were conducted during the first, sixth, and eighteenth months after placement. Although postcap sampling is expected to continue for at least an additional 24 months, this article summarizes the results of the demonstration project and postcap sampling efforts up to 18 months. Conventional clamshell placement was found to be effective for placing relatively thin (six‐inch) layers of active material. The viability of placing high‐value or difficult‐to‐place material in a controlled manner was successfully demonstrated with the laminated mat. Postcap monitoring indicates that all cap materials effectively isolated contaminants, but it is not yet possible to differentiate between conventional sand and active cap layer performance. Monitoring of the permeability control layer indicated effective reductions in groundwater seepage rates through the cap, but also showed the potential for gas accumulation and irregular release. All of the cap materials show deposition of new contaminated sediment onto the surface of the caps, illustrating the importance of source control in maintaining sediment quality. © 2006 Wiley Periodicals, Inc.     

Superfund site remediation by landfilling—overview of landfill design,operation, closure,and postclosure issues

This article discusses the appropriateness of using landfills as part of remediating hazardous chemical and Superfund sites, with particular emphasis on providing for true long‐term public health and environmental protection from the wastes and contaminated soils that are placed in the landfills. On‐site landfilling or capping of existing wastes is typically the least expensive approach for gaining some remediation of existing hazardous chemical/Superfund sites. The issues of the deficiencies in US EPA and state landfilling approaches discussed herein are also applicable to the landfilling of municipal and industrial solid “nonhazardous” wastes. These deficiencies were presented in part as “Problems with Landfills for Superfund Site Remediation” at the US EPA National Superfund Technical Assistance Grant Workshop held in Albuquerque, New Mexico, in February 2003. They are based on the author's experience in investigating the properties of landfill liners and the characteristics of today's landfills, relative to their ability to prevent groundwater pollution and to cause other environmental impacts. Discussed are issues related to both solid and hazardous waste landfills and approaches for improving the ability of landfills to contain wastes and monitor for leachate escape from the landfill for as long as the wastes in the landfill will be a threat. © 2004 Wiley Periodicals, Inc.     

Zinc,lead, and cadmium tolerance and accumulation in Cistus libanotis,Cistus albidus,and Cistus salviifolius: Perspectives on phytoremediation

Heavy metal contamination is of particular concern for human health and the environment. Phytoremediation is an emerging cost‐effective strategy to remediate heavy metal contaminated soil. However, this technique is limited by the small number of plants that are tolerant to heavy metals and are also accumulators. This study assayed zinc, lead, and cadmium tolerance and accumulation in Cistus libanotis, Cistus albidus, and Cistus salviifolius. The plants were cultivated in hydroponic conditions and exposed to different concentrations of Pb(NO₃)₂ (100 and 200 µM), ZnSO₄ (100 and 200 µM), or CdCl₂ (10 and 20 µM) for 3 weeks. Plant biomass and metal accumulation in roots and aboveground parts varied greatly among the species. All three species appeared to be sensitive to Zn. However, C. albidus displayed strong tolerance to Pb and accumulated large quantities of Pb and Cd in its roots. C. libanotis accumulated large quantities of Pb and Cd in its aboveground parts. C. libanotis can thus be classified as a Pb and Cd accumulator species. The study results show that C. albidus is suitable for phytostabilization of Pb‐contaminated soils, while C. libanotis can be used for phytoextraction of both Pb and Cd.     

Review of in situ remediation technologies for lead,zinc, and cadmium in soil

This article presents a review of in situ technologies for the remediation of soils contaminated with lead, zinc, and/or cadmium. The objective of this review is to assess the developmental status of the available in situ technologies and provide a general summary of typical applications and limitations of these technologies. The literature review identified seven in situ remediation technologies—solidification/stabilization, vitrification, electrokinetic remediation, soil flushing, phytoextraction, phytostabilization, and chemical stabilization. These technologies were considered for their ability to meet a specific set of remediation objectives under a range of conditions. Each of these technologies has both strengths and weaknesses for addressing particular remedial situations discussed in the article for each of the technologies. A general summary of which technologies are most applicable to common remedial scenarios is also provided. © 2004 Wiley Periodicals, Inc.     

Rehabilitation of the chernoistochinskii drinking water system,Nizhnii Tagil,Russia

The U.S. Environmental Protection Agency (EPA) performed a reservoir diagnosis and developed low-cost recommendations to improve drinking water quality for the city of Nizhnii Tagil, Russia. Despite widespread regional pollution, water quality within the drinking water supply source can be summarized as generally good. Sampling and analysis efforts did not reveal appreciable amounts of hazardous chemicals or metals. The major water quality problem stems from an abundance of blue-green algae during the summer months, causing drinking water taste and odor problems and filter clogging at the water treatment plant. City water treatment officials also frequently experience difficulties with maintaining an effective disinfection residual in the distribution system because it spans more than 30 kilometers in length. Regrowth of microorganisms in the distribution system often causes coliform bacteria counts to exceed standards. The implementation of a watershed protection and management program, and the installation of a new disinfection system, to purify drinking water and to reduce bacterial growth in the distribution system should improve drinking water quality for the city residents.     

Marine Debris &; Plastics: Environmental Concerns,Sources, Impacts and Solutions

Marine debris (marine litter) is one of the most pervasive and solvable pollution problems plaguing the world’s oceans and waterways. Nets, food wrappers, cigarette filters, bottles, resin pellets, and other debris items can have serious impacts on wildlife, habitat, and human safety. Successful management of the problem requires a comprehensive understanding of both marine debris and human behavior. Knowledge is key for consumers to make appropriate choices when it comes to using and disposing of waste items. Education and outreach programs, strong laws and policies, and governmental and private enforcement are the building blocks for a successful marine pollution prevention initiative. The plastic industry also has a role to play in educating its employees and customers, and searching for technological mitigation strategies.     

A review of corn masa processing residues: generation, properties, and potential utilization

The production of corn masa-based products in the US has been increasing over the last several years, and as a result, so has the quantity of waste materials being generated from this industry. Although currently landfilled, these byproduct streams may have potential for value-added processing and utilization, which are options that simultaneously hold the promise of increased economic benefit for masa processors as well as decreased potential pollution for the environment. Fundamental to any byproduct development effort is knowledge of the characteristics of the residue stream, because physical and chemical properties are vital for the proper design of subsequent processing operations and applications. Data for masa byproduct materials are currently not readily available, however. Thus, the objective of this study was to fully investigate, review, and summarize the existing literature in order to develop a comprehensive knowledge base for these residue streams. The most substantial findings from this study were that masa residues currently are not being utilized as coproducts, but instead are being landfilled; they have a high fiber content, and thus much untapped potential exists for its extraction and value-added utilization vis-à-vis human and industrial applications, including phytosterol and ethanol production. It was also determined that masa byproducts, due to the high fiber content, may also be suitable for use as livestock feed additives, especially for ruminant animals that can digest these materials. Furthermore, due to substantial calcium content, masa byproducts could also potentially be used as a calcium resource. Under current processing practices, though, these residues have very high moisture contents. Before they can be effectively and economically utilized, they must be dehydrated in order to reduce transportation costs, decrease microbial activity, and increase shelf life.     

Solidification/stabilization for remediation of wood preserving sites: Treatment for dioxins,PCP, creosote,and metals

This article discusses the use of solidification/stabilization (S/S) to treat soils contaminated with organic and inorganic chemicals at wood preserving sites. Solidification is defined for this article as making a material into a freestanding solid. Stabilization is defined as making the contaminants of concern nonmobile as determined from a leaching test. S/S then combines both properties. For more information on S/S in general the reader should refer to other publications (Connors, J.R. [1990]). Chemical fixation and solidification of hazardous wastes. New York: Van Nostrand Reinhold; US Environmental Protection Agency. [1993a]. Engineering bulletin solidification/stabilization of organics and inorganics (EPA/540/S‐92/015); Wiles, C.C. [1989]. Solidification and stabilization technology. In H.M. Freeman [Ed.], Standard handbook of hazardous waste treatment and disposal. New York: McGraw Hill) as this article addresses only wood preserving sites and assumes basic knowledge of S/S processes. For a more general discussion of wood preserving sites and some other remedial options, the reader may wish to refer to a previous EPA publication (US Environmental Protection Agency. [1992a]. Contaminants and remedial options at wood preserving sites [EPA/600/R‐92/182]). This article includes data from the successful remediation of a site with mixed organic/inorganic contaminants, remediation of a site with organic contaminants, and detailed treatability study results from four sites for which successful formulations were developed. Included are pre‐ and post‐treatment soil characterization data, site vaines. ileizdot‐ names (in some cases), treatment formulas used (generic aridproprietary), costs, recommendations, and citatioiis to inore detailed refer‐ en ces. The data presen ted iiidica te that dioxins, pentachlorophepi 01 (PCP), creosote, polycyclic aromatic hydrocarbom (PAHsI, and metals can be treated at moderate cost by the use of S/S techuologp.