Biosorption of lead ion by chemically-modified biomass of marine brown algae Laminaria japonica

In this paper, marine brown algae Laminaria japonica was chemically-modified by crosslinking with epichlorohydrin (EC(1), EC(2)), or oxidizing by potassium permanganate (PC), or only washed by distilled water (DW). They were used for equilibrium sorption uptake studies with lead. As can be seen from the experimental results that biosorption equilibriums were rapidly established in about 2h. The lead adsorption was strictly pH dependent, and maximum removal of lead on biosorbents were observed at pH 5.3. The effects solid/liquid ratio on lead biosorption was also investigated. The maximum lead uptakes were 1.67 mmol g(-1), 1.62 mmol g(-1), 1.54 mmol g(-1) and 1.21 mmol g(-1), respectively for EC(1), EC(2), PC and DW. The order of maximum lead uptakes for different pretreated and raw alga was EC(1)>EC(2)>PC>DW. A comparison of different isotherm models revealed that the combination of Langmuir and Freundlich (L-F) isotherm model fitted the experimental data best.     

Biosorption of copper(II) from aqueous solutions by pre-treated biomass of marine algae Padina sp

Biosorption of heavy metals can be an effective process for the removal and recovery of heavy metal ions from aqueous solutions. The biomass of marine algae has been reported to have high uptake capacities for a number of heavy metal ions. In this paper, the adsorption properties of a pre-treated biomass of marine algae Padina sp. for copper(II) were investigated. Equilibrium isotherms and kinetics were obtained from batch adsorption experiments. The biosorption capacities were solution pH dependent and the maximum capacity obtained was 0.80 mmol/g at a solution pH of about 5. The biosorption kinetics was found to be fast, with 90% of adsorption within 15 min and equilibrium reached at 30 min. The effects of light metal ions on copper(II) uptake were studied and the presence of light metal ions did not affect copper(II) uptake significantly. Fixed-bed breakthrough curves for copper(II) removal were also obtained. This study demonstrated that the pre-treated biomass of Padina sp. could be used as an effective biosorbent for the treatment of copper(II) containing wastewater streams.     

3种大型海藻对含铅废水的生物吸附研究

运用批吸附技术研究了海带、裙带菜和条斑紫菜对水溶液中Pb2+的吸附特性。结果表明:pH是影响生物吸附的重要因素,海带和裙带菜吸附Pb2+的适宜pH在3~5之间,紫菜吸附Pb2+的最佳pH为4;在20~40℃范围内,3种海藻对Pb2+的生物吸附非常快,40 min达到吸附平衡,动力学数据符合准二级动力学模型;Langmuir和Freundlich模型成功地拟合了平衡数据。热力学分析表明吸附能够自发进行。红外光谱分析表明,羧基是海带和裙带菜吸附Pb2+的主要官能团。实验结果表明,用这3种海藻吸附剂对水溶液中Pb2+具有较好的吸附性能,海带和裙带菜的吸附容量相近,优于紫菜。     

The marine macroalga Cystoseira baccata as biosorbent for cadmium(II) and lead(II) removal: kinetic and equilibrium studies

This work reports kinetic and equilibrium studies of cadmium(II) and lead(II) adsorption by the brown seaweed Cystoseira baccata. Kinetic experiments demonstrated rapid metal uptake. Kinetic data were satisfactorily described by a pseudo-second order chemical sorption process. Temperature change from 15 to 45 degrees C showed small variation on kinetic parameters. Langmuir-Freundlich equation was selected to describe the metal isotherms and the proton binding in acid-base titrations. The maximum metal uptake values were around 0.9 mmol g(-1) (101 and 186 mg g(-1) for cadmium(II) and lead(II), respectively) at pH 4.5 (raw biomass), while the number of weak acid groups were 2.2 mmol g(-1) and their proton binding constant, K(H), 10(3.67) (protonated biomass). FTIR analysis confirmed the participation of carboxyl groups in metal uptake. The metal sorption was found to increase with the solution pH reaching a plateau above pH 4. Calcium and sodium nitrate salts in solution were found to affect considerably the metal biosorption.     

Biosorption characteristics of Bacillus gibsonii S-2 waste biomass for removal of lead (II) from aqueous solution

Lead (II) has been as one of the most toxic heavy metals because it is associated with many health hazards. Therefore, people are increasingly interested in discovering new methods for effectively and economically scavenging lead (II) from the aquatic system. Recent studies demonstrate biosorption is a promising technology for the treatment of pollutant streams. To apply these techniques, suitable adsorbents with high efficiency and low cost are demanded. The waste biomass of Bacillus gibsonii S-2 biosorbent was used as low-cost biosorbent to remove metallic cations lead (II) from aqueous solution. To optimize the maximum removal efficiency, the effect of pH and temperature on the adsorption process was studied. The isotherm models, kinetic models and thermodynamic parameters were analysed to describe the adsorptive behaviour of B. gibsonii S-2 biosorbent. The mechanisms of lead (II) biosorption were also analysed by FTIR and EDX. The results showed that the optimum pH values for the biosorption at three different temperatures, i.e. 20, 30 and 40 °C, were determined as 4. The equilibrium data were well fitted to Langmuir model, with the maximum lead (II) uptake capacities of 333.3 mg?g^?1. The kinetics for lead (II) biosorption followed the pseudo-second-order kinetic equation. The thermodynamic data showed that the biosorption process were endothermic (?G?<?0), spontaneous (?H?>?0) and irreversible (?S?>?0). The mechanism of lead (II) biosorption by the waste biomass of B. gibsonii S-2 biosorbent could be a combination of ion exchange and complexation with the functional groups present on the biosorbent surface. The application of the waste biomass of B. gibsonii S-2 for lead (II) adsorption, characterized with higher lead (II) sorption capacity and lower cost, may find potential application in industrial wastewater treatment.     

A comparative investigation on the biosorption of lead by filamentous fungal biomass

The removal of lead from aqueous solutions by adsorption on filamentous fungal biomass was studied. Batch biosorption experiments were performed to screen a series of selected fungal strains for effective lead removal at different metal and biomass concentrations. Biosorption of the Pb²⁺ ions was strongly affected by pH. The fungal biomass exhibited the highest lead adsorption capacity at pH 6. Isotherms for the biosorption of lead on fungal biomass were developed and the equilibrium data fitted well to the Langmuir isotherm model. At pH 6, the maximum lead biosorption capacity of Mucor rouxii estimated with the Langmuir model was 769 mg/g dry biomass, significantly higher than that of most microorganisms. Biomass of Mucor rouxii showed specific selectivity for Pb²⁺ over other metals ions such as Zn²⁺. Ni²⁺ and Cu²⁺. This fungal strain may be applied to develop potentially cost-effective biosorbent for removing lead from effluents. The technique of scanning electron microscopy coupled with X-ray dispersion analysis shows that Pb²⁺ has exchanged with K⁺ and Ca²⁺ on the cell wall of Mucor rouxii, thereby suggesting ion exchange as one of the dominant mechanisms of metal biosorption for this fungal strain.     

Lead biosorption and desorption by intact and pretreated spirulina maxima biomass

In order to search for locally available and untried biomaterials in China with high removal capacity of heavy metals from wastewater, the feasibility of Spirulina maxima as biosorbent for lead removal and recovery from aqueous solution was investigated. The lead biosorption was studied by using intact biomass and pretreated biomass of S. maxima. The effects of operational conditions (e.g. pH, contact time, biomass concentration etc.) on lead biosorption were investigated. The biosorption was solution pH dependent and the maximum adsorption was obtained at a solution pH of about 5.5. The adsorption equilibrium was reached in 60 min. The biosorption followed the Freundlich isotherm model. The maximum removal ratios of lead were about 84% in intact biomass and 92% in pretreated biomass. The lead adsorbed could be desorbed effectively by 0.1 M nitric acid, EDTA and hydrochloric acid. The results in this study indicated that pretreated biomass of S. maxima was a promising candidate for removing lead from wastewater.     

Phytoremediation potential of Spirulina (Arthrospira) platensis: biosorption and toxicity studies of cadmium

This study examines the possibility of using Spirulina (Arthrospira) platensis TISTR 8217 to remove low concentrations of cadmium (less than 100 mg/l) from wastewater. The cyanobacteria were exposed to six different cadmium concentrations for 96 h, and the growth rate was determined using an optical density at 560 nm. The inhibiting concentration (IC50) was estimated using probit analysis. The IC50 at 24, 48, 72, and 96 h were 13.15, 16.68, 17.28, and 18.35 mg/l Cd, respectively. Cellular damage was studied under a light microscope and a transmission electron microscope. Swollen cells and fragmented filaments were observed. Cell injury increased with increasing concentrations of cadmium. Ultrastructural changes were observed in the algae exposed to cadmium concentrations both close to IC50 (14.68 mg/l) and at IC50 (18.35 mg/l). The alterations induced by cadmium were disintegration and disorganization of thylakoid membranes, presence of large intrathylakoidal space, increase of polyphosphate bodies, and cell lysis. In addition, the cadmium adsorption by algal cells was studied. Environmental factors were found to have an effect on biosorption. The uptake of cadmium was not affected by the temperature of the solution, but the sorption was pH dependent. The optimum pH for biosorption of algal cells was 7. The cadmium uptake process was rapid, with 78% of metal sorption completed within 5 min. The sorption data fit well to the Langmuir isotherm. The maximum adsorption capacity for S. platensis was 98.04 mg Cd per g biomass.     

Characterization and lead(II), cadmium(II), nickel(II) biosorption of dried marine brown macro algae Cystoseira barbata

Purpose

The objectives of this research are to identify the functional groups and determine corresponding pK _a values of the acidic sites on dried brown algae Cystoseira barbata using FTIR and potentiometric titrations, and to investigate the biosorption ability of biomass towards divalent nickel, cadmium, and lead ions. Adsorption was studied as a function of solution pH and contact time, and experimental data were evaluated by the Langmuir isotherm model.

Methods

CaCl₂ pretreatment was applied to the sorbent for enhancing the metal uptake capacity. The effect of solution pH on biosorption equilibrium was investigated in the pH range of 1.5?C5.0. Individual as well as competitive adsorption capacity of the sorbent were studied for metal cations and mixtures.

Results

The retention of the tested metal ions was mostly influenced from pH in the range of 1.5?C2.5, then stayed almost constant up to 5.0, while Ni(II) uptake showed the highest variation with pH. Potentiometric titrations were performed to find the number of strong and weak acidic groups and their acidity constants. The density of strong and weak acidic functional groups in the biomass were found to be 0.9 and 2.26?mmol/g, respectively. The FTIR spectra of the sorbent samples indicated various functionalities on the biomass surface including carboxyl, hydroxyl, and amino and sulphonate groups which are responsible for the binding of metal ions.

Conclusions

The capacity of the biomass for single metal ions (around 1?mmol/g) was increased to 1.3?mmol/g in competitive adsorption, Pb(II) showing the highest Langmuir intensity constant. Considering its extremely high abundance and low cost, C. barbata may be potentially important in metal ion removal from contaminated water and industrial effluents.     

Biosorption of Pb(II) by biomass of KC-2: kinetic, equilibrium and characteristic studies

Performance and characteristics of biosorption of Pb(II) had been studied in a batch system using the fungal strain biomass, KC-2. The biosorption performance was investigated by analysing the effects of such factors as the initial pH, initial Pb(II) concentration, and contact time at 303 K. The maximum Pb(II) adsorption was obtained at pH 5.0. The experimental data were described by the pseudo first-order, pseudo second-order and intraparticle diffusion kinetic models, and were closely followed the pseudo second-order kinetic model. The equilibrium experimental data were well fitted to Langmuir model and the maximum biosorption capacity was 84.03 mg g(-1). The adsorption mechanism was examined by FTIR, SEM and EDAX analysis. Results indicated that carboxylic, hydroxyl and amine groups were involved in the biosorption and ion exchange mechanism existed.     

Biosorption of strontium from aqueous solution by fungus Aspergillus terreus

INTRODUCTION: The biosorption characteristics of strontium ions using fungus Aspergillus terreus were investigated. Experimental parameters affecting the biosorption process such as pH, contact time, initial metal concentration, and temperature were studied. MATHEMATICAL DESCRIPTION: Fungus A. terreus exhibited the highest strontium uptake capacity at 15°C at an initial strontium ion concentration of 876 mg L(-1) and an initial pH of 9. Biosorption capacity increased from 219 to 308 mg g(-1) with a decrease in temperature from 45°C to 15°C at this initial strontium concentration. The equilibrium data fitted very well to the Langmuir adsorption model in the concentration range of strontium ions and at all the temperatures studied. CONCLUSION: Evaluation of the experimental data in terms of biosorption dynamics showed that the biosorption of strontium onto fungus followed the pseudo-second-order dynamics well (R(2)?>?0.985). The calculated thermodynamics parameters (-1.64?相似文献   

A comparative study on the biosorption characteristics of some yeasts for Remazol Blue reactive dye

Biosorption capacities and rates of different kinds of dried yeasts (Saccharomyces cerevisiae, Schizosaccharomyces pombe, Kluyveromyces marxianus, Candida sp., C. tropicalis, C. lipolytica, C. utilis, C. quilliermendii and C. membranaefaciens) for Remazol Blue reactive dye from aqueous solutions were compared under laboratory conditions as a function of initial pH and initial dye concentration. Optimum initial biosorption pH was determined as 2 for all the yeasts. All the yeast species showed comparable and very high dye sorption at 100 mg/l initial dye concentration. The equilibrium sorption capacity of the biomass increased with increasing initial dye concentration up to 400 mg/l for Candida sp. C. lipolytica and C. tropicalis; up to 300 mg/l for C. quilliermendii and C. utilis and up to 200 mg/l for S. cerevisiae, S. pombe, K. marxianus and C. membranaefaciens while the adsorption yield of dye showed the opposite trend for all the yeasts. Among the nine yeast species, C. lipolytica exhibited the highest dye uptake capacity (Q(0) = 250 mg/g). Both the Freundlich and Langmuir adsorption models were found suitable for describing the biosorption of the dye by all the Candida yeasts (except C. membranaefaciens). The results indicated that the dye uptake process followed the pseudo-second-order kinetics for each dye-yeast system.     

棘孢曲霉(Aspergillus aculeatus)对Pb~(2+)和Cd~(2+)的吸附特征

为了研究棘孢曲霉(Aspergillus aculeatus)对溶液中Pb~(2+)和Cd~(2+)吸附过程的特征,分别从动力学、热力学和吸附等温线三方面进行了实验,同时还研究了pH、温度、时间、重金属离子起始浓度和吸附剂用量对吸附过程的影响。等温吸附过程可以用Langmuir方程来描述。在实验设定条件下,棘孢曲霉对Pb~(2+)和Cd~(2+)最大吸附量分别为71.2 mg/g和59.8 mg/g;动力学实验数据很好的符合二级动力学方程,吸附达到平衡的时间为3 h;热力学实验数据显示该吸附过程为自发的、吸热的过程。     

棘孢曲霉（Aspergillus aculeatus）对Pb2＋和Cd2＋的吸附特征

为了研究棘孢曲霉（Aspergillus aculeatus）对溶液中Pb^2＋和Cd^2＋吸附过程的特征，分别从动力学、热力学和吸附等温线三方面进行了实验，同时还研究了pH、温度、时间、重金属离子起始浓度和吸附剂用量对吸附过程的影响。等温吸附过程可以用Langmuir方程来描述。在实验设定条件下，棘孢曲霉对Pb^2＋和Cd^2＋最大吸附量分别为71.2 mg/g和59.8 mg/g；动力学实验数据很好的符合二级     

基因工程菌E.coli BL21-NiCoT吸附镍的性能研究

以表达Staphylococcus aureus ATCC6538镍钴转运酶NiCoT基因的基因工程菌E.coli BL21-NiCoT作为生物吸附剂处理含镍废水.结果表明:基因工程菌在pH为4～9时有比较好的吸附效果,30 min就达到了吸附平衡;基因工程菌对Ni2 的富集容量比原始宿主菌有很大的提高,最大平衡富集量从3.76 mg/g增加到11.33 mg/g,增幅达3倍多,溶液中Ni2 的最大去除率也从原来的35.62%增加到91.23%;Cu2 、Cr6 、Zn2 等的存在对吸附没有很大的影响.镍进入细胞内后与羟基和酰胺基团发生结合,蛋白类物质和含羟基类物质在细胞内富集镍的过程中起到重要作用;基因工程菌转接10、20、30、40、50次,重组质粒保持良好的结构稳定性,基因工程菌对镍的富集能力也具有较好的稳定性.     

Removal of mercury(II) from aqueous solutions using the leaves of the Rambai tree (Baccaurea motleyana)

This study was undertaken to evaluate the biosorption potential of a natural, low-cost biosorbent, Rambai leaves (Baccaurea motleyana), to remove trace amounts of Hg(II) from aqueous solutions. It was found that the amount of Hg(II) biosorption by Rambai leaves increased with initial metal ion concentration, contact time, and solution pH but decreased as the amount of biosorbent increased. The maximum biosorption capacity was 121.95 mg/g for an initial concentration range of 5 to 120 ppb. Overall, kinetic studies showed that the Hg(II) biosorption process followed pseudo-second-order kinetics based on pseudo-first-order and intraparticle diffusion models. Isotherm data revealed that the biosorption process followed both Freundlich and Langmuir isotherms. The value of separation factor, R(L), from the Langmuir equation and rate of biosorption, n, from the Freundlich model also indicated favorable adsorption.     

Biosorption of lead(II) in aqueous solution by spent mushroom Tricholoma lobayense

The biosorption of lead(II) ions in both simulated and real wastewater by spent mushroom Tricholoma lobayense, was studied in this work. The results show a biomass with a high potential for removing lead ions from wastewater. The optimum pH for the adsorption is 4, and the adsorption process is fast. The best sorbent mass of the biomaterial is 5 g/L with an initial lead(II) concentration of 1 mmol/L. The process follows the Langmuir isotherm model, and the biosorption capacity of lead ions reaches to 210 mg/g, which is higher than many biosorbents previously studied. The mechanism of biosorption may be mainly attributed to ion exchange. The FT-IR study identifies the functional groups responsible for this process. A scanning electron microscope showed a significant change of the sorbent surface after the biosorption process. The energy dispersive elemental analysis also confirmed the adsorption of lead(II) ions.     

Loofa sponge immobilized fungal biosorbent: a robust system for cadmium and other dissolved metal removal from aqueous solution

The potential of loofa sponge discs to immobilize fungal biomass of Phanerochaete chrysosporium (a known biosorbent) was investigated as a low cost biosorbent for the removal of Cd(II) ions from aqueous solution. A comparison of the biosorption of Cd(II) by immobilized and free fungal biomass from 10 to 500 mg l(-1) aqueous solutions showed an increase in uptake of over 19% when the biomass is immobilized (maximum biosorption capacity of 89 and 74 mg Cd(II) g(-1) biomass for immobilized and free biomass respectively at a solution pH of 6). Equilibrium was established within 1h and biosorption was well defined by the Langmuir isotherm model. The immobilized biomass could be regenerated using 50 mM HCl, with up to 99% metal recovery and reused in ten biosorption-desorption cycles without significant loss of capacity. This study suggests that such an immobilized biosorbent system has the potential to be used in the industrial removal/recovery of cadmium and other pollutant metal ions from aqueous solution.     

Removal of nickel (II) from aqueous solutions using marine macroalgae as the sorbing biomass

In the present study biosorption technique, the passive accumulation of metals by biomass, is used for the removal of nickel from aqueous medium. The brown algae, Sargassum sp., in its natural and acid treated forms are used as a low cost sorbent. The adsorption characteristics of nickel on Sargassum sp. are evaluated as a function of time, pH, adsorbent dosage and initial concentration of nickel. The equilibrium adsorption data are fitted to Freundlich and Langmuir adsorption isotherm models and the model parameters are evaluated. Both the models represent the experimental data satisfactorily. The adsorption follows Lagergren first order kinetic model. The monolayer adsorption capacities of natural and acid treated forms of algae as obtained from Langmuir adsorption model are found to be 181 and 250mg g(-1) respectively.     

Application of a magnetotactic bacterium, Stenotrophomonas sp. to the removal of Au(III) from contaminated wastewater with a magnetic separator

In this study, the feasibility of applying a magnetotactic bacterial isolate (MTB), Stenotrophomonas sp. to the removal of Au(III) was investigated. Biosorption experiments showed that Au(III) biosorption capacity exhibited no significant difference in the initial pH range of 1.0-5.5, while decreased more significantly in the initial pH range of 5.5-13.0. Langmuir isotherm indicated that the maximum Au(III) biosorption capacity of Stenotrophomonas sp. were 506, 369 and 308 mg g(-1) dry weight biomass at the initial pH values of 2.0, 7.0 and 12.0, respectively. Thiourea was proved to be an effective desorbent to recover Au from the MTB biomass and 91% Au adsorbed on the biomass could be recovered at equilibrium when the thiourea concentration was 0.8M. The magnetic separator developed by our research team used for separating Au loaded MTB biomass showed high separation efficiency, with 100% biomass removed at the magnetic intensity of 1200 Gs in 180 min. The analyses from FTIR and XRD further confirmed that the reduction of Au(III) to Au(0) by the reductants on the MTB biomass occurred, and the deposition of nano-crystal Au(0) particles, ranging from 24.7 to 31.4 nm, could be estimated on the biomass surface.