Industrial waste management simulation game and its educational effect

The purposes of this study were to develop the Industrial Waste Game and to examine the validity of this game as a tool for environmental education. The aim of this game is to enable players to understand the social dilemma between individual interest of hazardous dumping and the social cost of purifying pollution, and to find a solution to the social dilemma by providing the monitoring and sanction system for illegal dumping or other efficient systems. The game was played by 213 undergraduate students who were divided into 40 groups of 5 to 6 people. One of 4 combinations of monitoring and penalty conditions was assigned to each group. The players were asked to answer questionnaires concerning their interests and understanding of the industrial waste issue before and after the game to evaluate educational effects. The results indicated that the players increased their awareness of industrial waste problems and came to understand that these problems were caused not by psychological factors such as immorality of the illegal dumper but mainly by social structural factors like the social dilemma. Through playing the game and participating in post-game discussion, players were able to obtain interesting experience and gain motivation to learn more.     

协同创新视角下资环专业研究生科技创新能力提升途径

资源循环科学与工程专业硕士毕业生存在规模小、科技创新能力不足、能力施展受限等问题,无法满足产业对高层次人才的需求。究其原因有:(1)新兴专业,其研究生导师队伍建设不健全,人才培养质量参差不齐;(2)交叉专业,其科技创新能力培养方向尚需融合凝练;(3)综合专业,其现有科研平台还不足以支撑学科发展,科技创新能力培养模式还没有完全形成。因此,本学科研究生培养单位应树立协同创新理念,坚持行业需求导向,充分挖掘办学特色和优势,凝练培养方向、完善以科技创新能力培养核心的研究生培养方案;加强师资队伍建设,建立健全科研平台;支持鼓励科技创新实践活动,做好学科前沿追踪;加强校校交流互动,提升硕士点认可度。     

Optimization of separation and logistics for recycling materials from wallpaper hanging sites

It is of huge importance for sustainability to find a pragmatic solution for recycling of a variety of wastes emitted in small mass such as the case of wallpaper replacements. A combination of two-step sorting scheme and transportation of the wastes in collaboration with the wholesalers was proposed to enhance the efficiency of recycling. The two-step sorting consists of the first sorting at the wallpaper hanging sites to separate and group wastes in a way to avoid heavy additional burden on the hanging job. Secondary sorting is conducted at a Sorting Center to re-group wastes to send to an intermediate processing company for recycling. To minimize the costs for transportation, the grouped wastes emitted at the hanging sites are brought back by the hangers and kept temporally and then moved to the wholesaler(s) on the way to receive new materials. When the wastes at the wholesaler(s) become sufficiently large for economic transportation, a truck is arranged to collect the wastes to transport them to the Sorting Center. A feasibility study to test the practicality of the method confirmed that it could be operable and the cost would be comparable or lower than that currently incurred for disposal of the wastes.     

Management status of end-of-life vehicles and characteristics of automobile shredder residues in Korea

An end-of-life vehicle (ELV) is dismantled to recover and recycle any re-usable parts, then shipped to the shredding facility for further recovery of iron with any remaining Automobile Shredder Residue (ASR) to be considered as wastes and to be disposed of by either thermal treatment or landfill. Overall ELVs management status in Korea, including recycling resulting from the dismantling processes, was surveyed using some questionnaires given to dismantlers and other available information to provide some feasible means for future treatment. The averaged recycle rate in the dismantling stage showed a value of 44% and the rest of an ELV was then compressed and transported to shredding companies to recover mainly the iron content which averaged 38.7% of the mass of a new vehicle. The non-ferrous metals such as copper, antimony, zinc and aluminum accounted for only 1.5%. The Shredder dusts (SDs) were found to be composed of light and heavy fluffs and soil/dust and amounted to 15.8% based on the mass of a new vehicle. Dumping of fluff and inorganic residues into a landfill site, however, will be restricted when new regulations are implemented to reduce the disposal amount to less than 5% of a new car as done in European countries and Japan. The detailed characteristics of SDs were investigated to provide an idea of how to treat them in order to meet a future expected enforcement.     

Accounting for Climate Change: Introduction

The assessment of greenhouse gases (GHGs) emitted to and removed from the atmosphere is high on both political and scientific agendas internationally. As increasing international concern and cooperation aim at policy-oriented solutions to the climate change problem, several issues have begun to arise regarding verification and compliance under both proposed and legislated schemes meant to reduce the human-induced global climate impact. The approaches to addressing uncertainty introduced in this article attempt to improve national inventories or to provide a basis for the standardization of inventory estimates to enable comparison of emissions and emission changes across countries. Authors of the accompanying articles use detailed uncertainty analyses to enforce the current structure of the emission trading system and attempt to internalize high levels of uncertainty by tailoring the emissions trading market rules. Assessment of uncertainty can help improve inventories and manage risk. Through recognizing the importance of, identifying and quantifying uncertainties, great strides can be made in the process of Accounting for Climate Change.     

Determination of renewable energy yield from mixed waste material from the use of novel image analysis methods

Two novel techniques are presented in this study which together aim to provide a system able to determine the renewable energy potential of mixed waste materials. An image analysis tool was applied to two waste samples prepared using known quantities of source-segregated recyclable materials. The technique was used to determine the composition of the wastes, where through the use of waste component properties the biogenic content of the samples was calculated. The percentage renewable energy determined by image analysis for each sample was accurate to within 5% of the actual values calculated. Microwave-based multiple-point imaging (AutoHarvest) was used to demonstrate the ability of such a technique to determine the moisture content of mixed samples. This proof-of-concept experiment was shown to produce moisture measurement accurate to within 10%. Overall, the image analysis tool was able to determine the renewable energy potential of the mixed samples, and the AutoHarvest should enable the net calorific value calculations through the provision of moisture content measurements. The proposed system is suitable for combustion facilities, and enables the operator to understand the renewable energy potential of the waste prior to combustion.     

Describing variability of MSW composition data with the log-logistic distribution

Variations in solid waste composition data are necessary as inputs to solid waste planning, yet uncertainty exists regarding which probability distributions might be generally valuable to describe the variability. Twenty-two detailed analyses of solid waste from British Columbia, Canada, were fitted to distributions using the BestFit software. Alternative distributions were ranked based on three goodness-of-fit parameters and twelve waste fractions. The log-logistic distribution was found to be the most able to fit over the wide range of composition types considered. The results were demonstrated to be insensitive to the number of waste components or to the choice of a two- or three-parameter distribution. Although other distributions were able to better match the waste composition for individual waste types, the log-logistic distribution was demonstrated to fit, overall, a wide variety of waste composition types.     

The potential of financial incentives to enhance householders' kerbside recycling behaviour

Although the successful enhancement of householders' participation in kerbside recycling schemes is essential for household waste recycling schemes to reach their desired levels of achievement, our understanding of householders' responses to the various incentives available to waste managers is incomplete. In particular, whether and how the recycling behaviour of householders may be favourably altered through imposition of financial penalties or rewards is not fully understood. Surveys of householders' attitudes in the London Borough of Havering, served by a kerbside co-mingled survival bag recycling scheme, showed they might be better encouraged to recycle more through improvements to structural and promotional aspects of the recycling scheme than through imposition of financial incentives. If financial incentives were to be imposed to enhance kerbside recycling, householders preferred: (1) rewards to penalties, and (2) community-based rewards and local taxation rebates to other or individual rewards. Given the attitudes of householders and the resources that would be needed to monitor their recycling behaviour as a basis for delivering financial incentives, it is suggested that the priority for enhancing recycling should be to make appropriate improvements in the infrastructure and support of the kerbside scheme and service.     

变频器故障波形预处理方法研究

电力电子设备在电力系统中的运用越来越广泛,其故障后对电力系统的运行影响也越来越大,从运行设备中提取波形用于诊断其相关故障的诊断方法的研究正在深入开展。由于现场采集波形的数据往往过于庞杂,不利于切中关键的故障特征,在研究用现场录波进行故障诊断前,首先要研究如何对实际采集的波形数据进行简化的方法。本文通过编制C＋＋程序,对故障录波简化过程进行了研究,并通过故障波形不同简化效果的对比说明了提高数据处理效率与减少波形特征损失的结合点的选取。     

Critical Reconsideration of Phase Space Embedding and Local Non-Parametric Prediction of Ozone Time Series

Phase space prediction is a feature selection method which triesto exploit non-linear dynamics of an underlying system. We describe and offer a critical reconsideration of this approach,discuss questions of whether non-linear methods are justified by the data, and apply them to ozone time series from single locations. Our main objectives are to obtain air quality forecasts in order to provide public health warnings and to provide an insight into the dynamics of the underlying system.Interestingly, comparable linear data sets (surrogates)have very similar structure and give similar predictionaccuracy to that of the ozone data. In this instance theredoes not appear to be any advantage to applying the phasespace approach to univariate time series.     

Financing remediation by delisting and selling clean portions of affected property

It is an established fact that property owners can face significant liabilities as a result of an on-site environmental contamination problem. This paper outlines a successful, innovative remedial strategy that, in conjunction with agency negotiation, afforded a property owner minimal financial expenditure and, at the same time, facilitated property cleanup and reuse. The strategy includes the delisting and sale of “clean” portions of the property to obtain the finances necessary to remediate the remaining “impacted” portion of the property. Previous investigations performed by EPA indicate the affected area to be a five to seven acre area located in the northeast portion of the property. Since a portion of the property was affected, significant restrictions for long-term use were placed on the entire property. A summary of environmental data generated for the property was prepared and submitted to the agency. This data summary communicated a strategy which was developed to delist and sell the “clean” portion of the property and to use the proceeds to clean up the affected property. To accomplish this, several tasks were outlined, including work-plan preparation and submittal, data collection, and interim remedial activities. In addition, a risk assessment is planned to identify potential threats to receptors downgradient of the impacted areas. This strategy allows the owner of an environmentally distressed property to use financial assets of the property to facilitate an acceptable solution with both regulatory agencies and the surrounding community.     

Flame treatment for the selective wetting and separation of PVC and PET

Flame treatment has been used for many years to modify the surface of plastics to allow coatings to be added. The effect of the treatment is to produce hydrophilic species on the surface of the plastic making it water-wettable. The production of hydrophilic plastic surfaces is also required in the selective separation of plastics by froth flotation. For the process to be selective one plastic must be rendered hydrophilic while another remains hydrophobic. In this study the potential for separation of PVC and PET has been investigated. Flame treatment was shown to be very effective in producing a hydrophilic surface on both plastics, although the process was not selective under the conditions investigated. Raising the temperature of the plastics above their softening point produced a hydrophobic recovery. As the softening point of PVC was significantly lower than for PET it was possible to produce a significant difference in hydrophobicity, as judged using contact angle measurement. When immersed in water the contact angle of the PVC was found to be strongly dependent on the pH. Good separation efficiency of the two plastics was achieved by froth flotation from pH 4 to 9. One particular advantage of the technique is that no chemical reagents may be required in the flotation stage. The practicalities of designing a flake treatment system however have to be addressed before considering it to be a viable industrial process.     

Applying the Protective Role of Condensed Tannins to Acrylic-based Surface Coatings Exposed to Accelerated Weathering

Condensed tannins, extractable from tree bark have been assessed as functional additives to provide a protective role to acrylic-based coating resins. In addition to retaining high antioxidant capacity, the UV absorption properties of native and chemically modified tannins were found to be variously impacted by pH and degree of esterification or etherification. When added to acrylic-based coatings, these tannins were found to contribute colour to a white-base, but only small perceptive differences were found for clear coated wood using typical additive loadings of 0.1–0.4%. Integration of tannins in native or modified form to do not inhibit the cure of acrylic coatings or found to leach from cured coating films. Accelerated weathering was used to evaluate the photo-stability of tannin-modified acrylic and styrene-acrylic coatings. Native and modified tannins with maleate or methylcarboxylate groups retaining high antioxidant activity were associated with significantly greater coating longevity and performance than use of a synthetic photostabiliser. Moreover, esterified condensed tannins with a high degree of substitution also outperformed synthetic additives indicating the inherent UV absorption potential of these materials also contributed this efficacy within the acrylic and styrene-acrylic coating systems.     

Rotary drum soil blending for source zone remediation: Various application scenarios

Mechanical blending of contaminated soil with amendments has recently reemerged as an important treatment technology. From its original application using large‐diameter augers in the early 1990s to the current use of rotary drum blenders, soil blending is being used as an alternative to other remediation technologies like amendment injection and soil vapor and groundwater extraction. Shallow (approximately 10 m below ground surface [bgs] or less) soil blending also offers an alternative to excavation and disposal. Soil blending has been used to remediate a site with various contaminants including, but not limited to, chlorinated solvents, petroleum, and metals. The types of soils susceptible to soil blending vary from sands and gravels to silts and clays to fractured rock and combinations of all of these. The types of amendments blended include oxidants, reducing agents, biological enhancements, and stabilizing amendments. Soil blending systems deliver the power to the mixing head to adequately mix the soil and amendment to enhance remediation effectiveness. Since long‐term contamination is often a result of heterogeneously distributed residual contaminant in localized source zones that are difficult to access, the typical aim of soil blending is to homogenize the soil while effectively distributing amendment to these zones made accessible by blending. By effectively homogenizing the soil, however, soil blending will increase the void ratio and disrupt the shear strength and bearing capacity of the soil so an important component of a soil blending technology is proper recovery of these geotechnical parameters. This can be achieved by using well‐known soil improvement techniques such as amending all or a portion of the blended area with Portland cement or lime. Several case studies of soil blending treatments of different contaminants and amendments in various soil types are provided.     

Modelling a recovery network for WEEE: a case study in Portugal

The European Union directive for electric and electronic waste, published in 2003, enforced all European countries to meet some targets concerning the recycling and recovery of these products. This directive was transposed to the Portuguese legislation in 2004. Following this, a group of EEE producers set up an organization (Amb3e) whose mission was to design and manage a nationwide recovery network for WEEE, which will be the subject matter of this work. A generic MILP model is proposed to represent this network, which is applied to its design and planning, where the best locations for collection and sorting centres are chosen simultaneously with the definition of a tactical network planning. Several analyses are performed to provide further insights regarding the selection of these alternative locations. The results gave support to the company strategic expansion plans for a high number of centres to be opened and to their location near the major WEEE sources.     

Regional optimization model for locating supplemental recycling depots

In Taiwan, vendors and businesses that sell products belonging to six classes of recyclable materials are required to provide recycling containers at their local retail stores. The integration of these private sector facilities with the recycling depots established by local authorities has the potential to significantly improve residential access to the recycling process. An optimization model is accordingly developed in this work to assist local authorities with the identification of regions that require additional recycling depots for better access and integration with private facilities. Spatial accessibility, population loading and integration efficiency indicators are applied to evaluate whether or not a geographic region is in need of new recycling depots. The program developed here uses a novel algorithm to obtain the optimal solution by a complete enumeration of all cells making up the study area. A case study of a region in Central Taiwan is presented to demonstrate the use of the proposed model and the three indicators. The case study identifies regions without recycling points, prioritizes them based on population density, and considers the option of establishing recycling centers that are able to collect multiple classes of recycling materials. The model is able to generate information suitable for the consideration of decision-makers charged with prioritizing the installation of new recycling facilities.     

Capacitated location of collection sites in an urban waste management system

Urban waste management is becoming an increasingly complex task, absorbing a huge amount of resources, and having a major environmental impact. The design of a waste management system consists in various activities, and one of these is related to the location of waste collection sites. In this paper, we propose an integer programming model that helps decision makers in choosing the sites where to locate the unsorted waste collection bins in a residential town, as well as the capacities of the bins to be located at each collection site. This model helps in assessing tactical decisions through constraints that force each collection area to be capacitated enough to fit the expected waste to be directed to that area, while taking into account Quality of Service constraints from the citizens' point of view. Moreover, we propose an effective constructive heuristic approach whose aim is to provide a good solution quality in an extremely reduced computational time. Computational results on data related to the city of Nardò, in the south of Italy, show that both exact and heuristic approaches provide consistently better solutions than that currently implemented, resulting in a lower number of activated collection sites, and a lower number of bins to be used.     

Utilisation of single added fatty acids by consortia of digester sludge in batch culture

Inocula derived from an anaerobic digester were used to study (i) their potential for methane production and (ii) the utilisation rates of different short chain fatty acids (SCFAs) by the microbial community in defined media with mono-carbon sources (formic-, acetetic-, propionic-, butyric acid) in batch culture. It could be demonstrated that the microbial reactor population could be transferred successfully to the lab, and its ability to build up methane was present even with deteriorating biogas plant performance. Therefore, this reduction in performance of the biogas plant was not due to a decrease in abundance, but due to an inactivity of the microbial community. Generally, the physico-chemical properties of the biogas plant seemed to favour hydrogenotrophic methanogens, as seen by the high metabolisation rates of formate compared with all other carbon sources. In contrast, acetoclastic methanogenesis could be shown to play a minor role in the methane production of the investigated biogas plant, although the origin of up to 66% of methane is generally suggested to be generated through acetoclastic pathway.     

Evaluation of remedial countermeasures using the analytic network process

The aim of this paper is to present an evaluation method to aid decision makers in the prioritization and selection of appropriate countermeasures at the planning stage of site remediation. We introduced a hierarchical network (hiernet) decision structure and applied the Analytic Network Process (ANP) supermatrix approach to measure the relative desirability of the remedial alternatives using the decision maker's value judgment as input. A simplified illustrative example is presented to elucidate the process, as it is being applied to evaluate the feasible remedial countermeasures of a contaminated site caused by uncontrolled landfill. Four decision models derived from the generalized hiernet were examined to describe the effect of hierarchic functional dependence, inner dependence and feedback cycle on the derivation of the priority weights. The ANP could provide a more flexible analytical framework to break down one's judgment through a more elaborate structure in a systematic way to understand the complexity of the decision problem. The proposed method therefore may not only aid in selecting the best alternative but also may help to facilitate communication to understand why an alternative is preferred over the other alternatives through the analysis of the derived weights and its underlying decision structure.     

Resilience: A New Consideration for Environmental Remediation in an Era of Climate Change

There has been a growing movement within the environmental industry to develop more sustainable approaches in environmental remediation. These have generally included carbon footprint analysis, life cycle assessment, and best management practices to reduce the overall net environmental, social, and economic impacts of investigation and remediation activities. One of the foundational reasons net environmental impacts are currently evaluated is to identify and, subsequently, reduce contributions to climate change, primarily greenhouse gas emissions. While this trend toward sustainability and reduction in impact to the global environment is both important and admirable, the approach to remediation design and long‐term planning now needs to evolve further to better incorporate climate resilience into sustainable remediation design and implementation: designing remediation solutions that account for the projected impacts of climate change, as well as have the capacity to adapt to changing conditions. As a global population, we are now beyond the point of being able to prevent climate change and instead need to plan for adapting to it. In remediation, the effects of climate change create both risks and opportunities which should be considered during remedial design and long‐term planning. Responsible parties may see the push for—and management of—these considerations through their internal corporate risk management. The authors of this paper propose a simple framework for climate adaptation and resilience evaluations and plan development for remediation projects. ©2015 Wiley Periodicals, Inc.