Sorption of As, Cd and Tl as influenced by industrial by-products applied to an acidic soil: equilibrium and kinetic experiments

In situ stabilization of toxic elements in contaminated soils by the addition of amendments is being considered as an effective technique for remediation. In this paper, we performed both kinetics and equilibrium-based sorption experiments of three toxic elements (As, Cd and Tl) in soils amended with two by-products (phosphogypsum and sugar foam, rich in gypsum and calcium carbonate, respectively) to ascertain the feasibility of their application for improving the sorption capacity of As, Cd and Tl from the soil at 25, 35 and 50 °C. Kinetic studies indicated that the sorption follows a pseudo-second-order (PSO) kinetics and the sorption is a two-step diffusion process where both film and intraparticle diffusion played important roles in the sorption mechanisms of the elements. The Langmuir isotherms applied for sorption studies showed that the estimated maximum sorption capacity of the elements in control and amended soils decreased in the order of Cd > As > Tl. Using the thermodynamic equilibrium parameters obtained at different temperatures, the thermodynamic constants of sorption (ΔG, ΔH and ΔS) were also evaluated, indicating spontaneous and endothermic nature of the process, except Tl which was exothermic. An optimal scaling procedure was undertaken to determine the relationships between the kinetic and equilibrium sorption parameters. By means of statistical analysis it was seen that these inter-parametric relationships are dependent on the element nature.     

Characterization of endophytic Rahnella sp. JN6 from Polygonum pubescens and its potential in promoting growth and Cd,Pb, Zn uptake by Brassica napus

Microbe-assisted phytoremediation has been considered as a promising measure for the remediation of heavy metal-polluted soils. In this study, a metal-tolerance and plant growth-promoting endophytic bacterium JN6 was firstly isolated from roots of Mn-hyperaccumulator Polygonum pubescens grown in metal-contaminated soil and identified as Rahnella sp. based on 16S rDNA gene sequence analysis. Strain JN6 showed very high Cd, Pb and Zn tolerance and effectively solubilized CdCO₃, PbCO₃ and Zn₃(PO₄)₂ in culture solution. The isolate produced plant growth-promoting substances such as indole-3-acetic acid, siderophore, 1-aminocyclopropane-1-carboxylic deaminase, and also solubilized inorganic phosphate. Based upon its ability in metal tolerance and solubilization, the isolate JN6 was further studied for its effects on the growth and accumulation of Cd, Pb and Zn in Brassica napus (rape) by pot experiments. Rape plants inoculated with the isolate JN6 had significantly higher dry weights, concentrations and uptake of Cd, Pb and Zn in both above-ground and root tissues than those without inoculation grown in soils amended with Cd (25 mg kg^?1), Pb (200 mg kg^?1) or Zn (200 mg kg^?1). The isolate also showed a high level of colonization in tissue interior of rapes. The present results demonstrated that Rahnella sp. JN6 is a valuable microorganism, which can cost-effectively improve the efficiency of phytoremediation in soils contaminated by Cd, Pb and Zn.     

Sorption of sulfadiazine on Brazilian soils

Antimicrobials, among them sulfonamides are widely used in veterinary medicine and can contaminate the environment. The degree to which antimicrobials adsorb onto soil particles varies widely, as does the mobility of these drugs. Sulfadiazine (SDZ) was used to study the adsorption–desorption in Brazilian soil–water systems, using batch equilibrium experiments. Sorption of SDZ was carried out using four types of soils. Adsorption and desorption data were well fitted with Freundlich isotherms in log form (r > 0.999) and (0.984 < r < 0.999), respectively. An adsorption–desorption hysteresis phenomenon was apparent in all soils ranging from 0.517 to 0.827. The experimental results indicate that the Freundlich sorption coefficient (K_F) values for SDZ ranged from 0.45 to 2.6 μg^1?1/n (cm³)^1/n g^?1.     

Metal mobilization in soil by two structurally defined polyphenols

Polyphenols including tannins comprise a large percentage of plant detritus such as leaf litter, and affect soil processes including metal dynamics. We tested the effects of tannins on soil metal mobilization by determining the binding stoichiometries of two model polyphenols to Al(III) and Fe(III) using micelle-mediated separation and inductively coupled plasma optical emission spectroscopy (ICP-OES). By fitting the data to the Langmuir model we found the higher molecular weight polyphenol (oenothein B) was able to bind more metal than the smaller polyphenol (epigallocatechin gallate, EGCg). For example, oenothein B bound 9.43 mol Fe mol^?1, while EGCg bound 4.41 mol of Fe mol^?1. Using the parameters from the binding model, we applied the Langmuir model for competitive binding to predict binding for mixtures of Al(III) and Fe(III). Using the parameters from the single metal experiments and information about polyphenol sorption to soils we built a model to predict metal mobilization from soils amended with polyphenols. We tested the model with three natural soils and found that it predicted mobilization of Fe and Al with r² = 0.92 and r² = 0.88, respectively. The amount of metal that was mobilized was directly proportional to the maximum amount of metal bound to the polyphenol. The secondary parameter in each model was the amount of weak organically chelated Fe or Al that was in the soil. This study provides the first compound-specific information about how natural polyphenols interact with metals in the environment. We propose a model that is applicable to developing phytochelation agents for metal detoxification, and we discuss how tannins may play a role in metal mobilization from soils.     

Effect of humic acids on physicochemical property and Cd(II) sorption of multiwalled carbon nanotubes

Carbon nanotubes (CNTs), as a type of superior adsorbents for both organic and inorganic contaminants, are increasingly introduced into the environment. Ubiquitous natural organic matter (NOM) would coat on the released CNTs and change their physicochemical properties and sorption of contaminants. The effects of four sequentially extracted humic acids (HAs, as a model NOM) from a peat soil on the physicochemical properties and Cd(II) sorption of three multiwalled CNTs (MWNTs) with different surface areas were investigated. The MWNTs as purchased with very few oxygen-containing functional groups had relatively low sorption capacities (0.93–1.49 mg g⁻¹) for Cd(II) and the sorption capacity increased with increasing surface area of the MWNTs. Surface-coating with the HAs lowered surface areas of the MWNTs but greatly increased their sorption capacities (5.42–18.4 mg g⁻¹). The MWNT-bound HAs introduced oxygen-containing functional groups and negative charges to the MWNT surfaces, which could thus increase the apparent sorption of Cd(II) through chemical complexation and electrostatic attraction, respectively. The later-extracted HAs with lower polarity were more favorable for the surface-coating but increased less Cd(II) sorption by the MWNTs. The results are expected to shed light on understanding the underlying mechanism of the effect of NOM on the sorption of heavy metal ions by CNTs.     

Interspecies and interregional comparisons of the chemistry of PAHs and trace elements in mosses Hylocomium splendens (Hedw.) B.S.G. and Pleurozium schreberi (Brid.) Mitt. from Poland and Alaska

Comparative biogeochemical studies performed on the same plant species in remote areas enable pinpointing interspecies and interregional differences of chemical composition. This report presents baseline concentrations of PAHs and trace elements in moss species Hylocomium splendens and Pleurozium schreberi from the Holy Cross Mountains (south-central Poland) (HCM) and Wrangell–Saint Elias National Park and Preserve (Alaska) and Denali National Park and Preserve (Alaska). Total PAH concentrations in the mosses of HCM were in the range of 473–2970 μg kg^?1 (dry weight basis; DW), whereas those in the same species of Alaska were 80–3390 μg kg^?1 DW. Nearly all the moss samples displayed the similar ring sequence: 3 > 4 > 5 > 6 for the PAHs. The 3 + 4 ring/total PAH ratios show statistically significant differences between HCM (0.73) and Alaska (0.91). The elevated concentrations of PAHs observed in some sampling locations of the Alaskan parks were linked to local combustion of wood, with a component of vehicle particle- and vapor-phase emissions. In HCM, the principal source of PAH emissions has been linked to residential and industrial combustion of coal and vehicle traffic. In contrast to HCM, the Alaskan mosses were distinctly elevated in most of the trace elements, bearing a signature of the underlying geology. H. splendens and P. schreberi showed diverse bioaccumulative capabilities of PAHs in all three study areas.     

In situ measurements of volatile aromatic hydrocarbon biodegradation rates in groundwater

Benzene and alkylbenzene biodegradation rates and patterns were measured using an in situ microcosm in a crude-oil contaminated aquifer near Bemidji, Minnesota. Benzene-D6, toluene, ethylbenzene, o-, m- and p-xylenes and four pairs of C₃- and C₄-benzenes were added to an in situ microcosm and studied over a 3-year period. The microcosm allowed for a mass-balance approach and quantification of hydrocarbon biodegradation rates within a well-defined iron-reducing zone of the anoxic plume. Among the BTEX compounds, the apparent order of persistence is ethylbenzene > benzene > m,p-xylenes > o-xylene ≥ toluene. Threshold concentrations were observed for several compounds in the in situ microcosm, below which degradation was not observed, even after hundreds of days. In addition, long lag times were observed before the onset of degradation of benzene or ethylbenzene. The isomer-specific degradation patterns were compared to observations from a multi-year study conducted using data collected from monitoring wells along a flowpath in the contaminant plume. The data were fit with both first-order and Michaelis-Menten models. First-order kinetics provided a good fit for hydrocarbons with starting concentrations below 1 mg/L and Michaelis-Menten kinetics were a better fit when starting concentrations were above 1 mg/L, as was the case for benzene. The biodegradation rate data from this study were also compared to rates from other investigations reported in the literature.     

Ecotoxicity of xanthene dyes and a non-chlorinated bisphenol in soil

Soil eco-toxicity testing was conducted in support of Canada’s Chemical Management Plan (CMP) to fill data gaps for organic chemicals known to primarily partition to soil, and of which the persistence and inherent toxicity are uncertain. Two compounds representative of specific classes of chemicals: non-chlorinated bisphenols containing an –OH group (4,4′-methylenebis(2,6-di-tert-butylphenol (Binox)) and xanthene dyes (2′,4′,5′,7′-tetrabromo-4,5,6,7-tetrachloro-3′,6′-dihydroxy-, disodium salt (Phloxine B), 2′,4′,5’,7′-tetrabromofluorescein (TBF), 4′,5′-dibromofluorescein (DBF), and 4,5,6,7-tetrachlorofluorescein (TCF)) were evaluated. The effect of these substances on plant growth (Elymus lanceolatus and Trifolium pratense) and soil invertebrate survival and reproduction (Folsomia candida and Eisenia andrei) were assessed using a field-collected sandy soil. Binox was persistent throughout testing (up to 63 d) with an average recovery of 77 ± 2.9% at test end. Binox was not toxic to plants (IC50s > 1076 mg kg^?1) or E. andrei (IC50s > 2651 mg kg^?1); however, a significant reduction in F. candida adult survival and reproduction (IC50 = 89 (44–149) mg kg^?1) was evident. Phloxine B was also persistent throughout testing, with an average recovery of 82 ± 3.0% at test end. Phloxine B was significantly more toxic than Binox, with significant reductions in plant root growth (IC50s ? 11 mg kg^?1) and invertebrate reproduction (IC50s ? 22 mg kg^?1). DBF toxicity was not significantly different from that of Phloxine B for plant root growth (IC50s ? 30 mg kg^?1), but was significantly less toxic for shoot growth (IC50s ? 1758 mg kg^?1), and invertebrate adult survival (IC50s ? 2291 mg kg^?1) and reproduction (IC50s ? 451 mg kg^?1). A comparison between all four xanthene dyes was completed using F. candida, with the degree of toxicity in the order of Phloxine B ? TBF ～ DBF > TCF. The results from these studies will contribute to data gaps for poorly understood chemicals (and chemical groupings) under review for environmental risk assessments, and will aid in the validation of model predictions used to characterize the fate and effects of these substances in soil environments.     

Effect of DTPA on Cd solubility in soil – Accumulation and subsequent toxicity to lettuce

In a controlled environment experiment, using Cd spiked soil, lettuce plants were grown under a range of DTPA levels and were subsequently harvested to determine levels of phytoaccumulation. Cadmium phytoaccumulation significantly increased with increasing soil Cd level (P < 0.05) but unexpectedly decreased with increasing DTPA levels, despite the fact that solubility of Cd was increased in the soil. Cadmium translocation (from root to shoot) increased after DTPA application. Lettuce growth was inhibited by both Cd and DTPA (at and above 10 and 500 mg kg^?1 respectively), as a result of higher Cd mobility and subsequent toxicity which was caused by DTPA higher dosages. Metal solubility in the soil (ranged between 2.8 and 26.5 mg kg^?1) was found to be significantly higher (P < 0.01) as compared to control with increasing DTPA levels even after 3 months of DTPA application. Cadmium tissue concentration in all DTPA treatments was less than in the corresponding control treatment, indicating a negative effect of DTPA application on Cd uptake. In conclusion, lettuce was an unsuitable plant species for Cd accumulation, at least when associated with a DTPA chelator.     

Size distribution and sources of trace metals and n-alkanes in the Athens urban aerosol during summer

Size-resolved, 24-h aerosol samples were collected from June–July 2001 by means of an Andersen high-volume cascade impactor. Sampling was conducted in a central avenue (Patission) characterised by heavy traffic, 21 m above street level, in the Athens city centre. Samples were analysed by atomic absorption spectrometry and gas chromatography to determine the size distribution of nine metallic elements (Cd, Pb, V, Ni, Mn, Cr, Cu, Fe, Al) and n-alkanes (with carbon numbers in the range 18–35). The aerosol mass median diameter (MMD) was calculated by means of probit analysis on the cumulative mass concentration size distribution for each metals and n-alkane. The total n-alkane mass concentration (TNA) in total suspended particles (TSP) ranged from 72 to 1506 ng m⁻³ while the total metal concentration ranged from 5.6 to 28.6 μg m⁻³. The results showed that metals such as Cd, V and Ni are characterised by a MMD <1 μm, while the MMD for Pb and Mn are ∼1 μm. Such metals are generally considered to have anthropogenic emission sources. Other metals such as Al, Fe, Cu and Cr were found to have MMD=2–6 μm, which generally originate from soil dust or mechanical abrasion processes. The Carbon number profile of n-alkane compounds showed a strong anthropogenic source with only a minor biogenic influence. The concentration of most n-alkanes was characterised by high variability during the sampling period, in contrast to the concentration of most trace metals. Most n-alkanes had a unimodal size distribution with MMD=1–2 μm similar to those of some trace metals (Pb, Mn), which originate mostly from vehicle emissions. This is a strong indication that these species have a common source. Finally, gas–particle partitioning of n-alkanes was also examined for different particle sizes by means of the relationship between the partition constant K_p and saturation vapour pressure (p_L⁰) as proposed by current sorption models.     

Nitrous oxide emissions from mineral and organic soils of a Norway spruce stand in South–West Germany

Due to the high temporal and spatial variability of N₂O fluxes, estimates of N₂O emission from temperate forest ecosystems are still highly uncertain, particularly at larger scales. Although highest N₂O emissions with up to 7.0 kg N ha⁻¹ yr⁻¹ were mainly reported for soils affected by stagnant water, most of the reported gas flux measurements were performed at forest sites with well-aerated soils yielding mostly to low mean annual emission rates less than 1.0 kg N ha⁻¹ yr⁻¹. This study compares N₂O fluxes from upland (Cambisols) and temporally water-logged (Gleysols, Histosols) soils of the Central Black Forest (South-West Germany) over a period of 2 yr. Mean annual N₂O fluxes from investigated soils ranged between 0.2 and 3.9 kg N ha⁻¹ yr⁻¹. The fluxes showed a large variability between the different soil types. Emissions could be clearly ranked in the following order: Cambisols (0.26–0.75 kg N ha⁻¹ yr⁻¹)<Gleysols (1.37–2.68 kg N ha⁻¹ yr⁻¹)<Histosol (3.66–3.95 kg N ha⁻¹ yr⁻¹). Although the Cambisols cover two-thirds of the investigated area, only about half of the overall N₂O is emitted from this soil type. Therefore, regional or national N₂O fluxes from temperate forest soils are underestimated if soils characterised by intermediate aeration conditions are disregarded.     

Distribution and relationships of As,Cd, Pb and Hg in freshwater fish from five French fishing areas

The concentrations of arsenic, cadmium, mercury and lead in 149 muscle samples of eight freshwater fish species (European eel, bream, common carp, European catfish, roach, perch, pike and pikeperch) from five different French fishing areas from contaminated and control sites were measured by inductively coupled plasma mass spectrometry after microwave digestion under pressure. No significant correlation was found between the condition factor (CF), based on the length–mass relationship, and As, Cd and Pb levels in all the samples analysed, but a positive correlation was detected between CF and Hg levels (P < 0.0001, R = 0.49). Positive correlations with body length were only found for Hg in roach (P < 0.05, R = 0.32) and Pb in bream (P < 0.05, R = 0.48) and correlations with both body weight and length were also found for Hg in pike (P < 0.05, R = 0.90 and 0.86) and Cd in European eel (P < 0.01, R = ?0.35 and ?0.37). The average content and the standard deviation in fish muscle samples was 0.007 ± 0.012, 0.102 ± 0.077, 0.142 ± 0.097 and 0.035 ± 0.053 mg kg^?1 of wet mass for Cd, As, Hg and Pb, respectively. Significant differences were established between groups of predatory fish and non-predatory fish for Hg and Pb, and between control and contaminated sites in the whole selection and also within feeding guilds, i.e. the values of Hg in the benthophagic fish were significantly different between these sites. Finally, these results were also compared for each species with previous French and European studies.     

Influence of mature compost amendment on total and bioavailable polycyclic aromatic hydrocarbons in contaminated soils

A laboratory microcosm study was carried out to assess the influence of compost amendment on the degradation and bioavailability of PAHs in contaminated soils. Three soils, contaminated with diesel, coal ash and coal tar, respectively, were amended with two composts made from contrasting feedstock (green waste and predominantly meat waste) at two different rates (250 and 750 t ha^?1) and incubated for 8 months. During this period the treatments were sampled for PAH analysis after 0, 3, 6 and 8 months. Total and bioavailable fractions were obtained by sequential ultrasonic solvent extraction and hydroxypropyl-β-cyclodextrin extraction, respectively, and PAHs were identified and quantified by GC–MS. Bioavailability decrease due to sorption was only observed at the first 3 months in the diesel spiked soil. After 8 months, compost addition resulted in over 90% loss of total PAHs irrespective of soil types. Desorption and degradation contributed to 30% and 70%, respectively, of the PAH loss in the spiked soil, while PAH loss in the other two soils resulted from 40% enhanced desorption and 60% enhanced degradation. Compost type and application rates had little influence on PAH bioavailability, but higher PAH removal was observed at higher initial concentration during the early stage of incubation. The bioavailable fraction of PAH was inversely correlated to the number of benzene rings and the octanol–water partition coefficient. Further degradation was not likely after 8-month although over 30% of the residual PAHs were bioavailable, which highlighted the application of bioavailability concept during remediation activities.     

Sorption of perfluorooctane sulfonate to carbon nanotubes in aquatic sediments

To date, sorption of organic compounds to nanomaterials has mainly been studied for the nanomaterial in its pristine state. However, sorption may be different when nanomaterials are buried in sediments. Here, we studied sorption of Perfluorooctane sulfonate (PFOS) to sediment and to sediment with 4% multiwalled carbon nanotubes (MWCNTs), as a function of factors affecting PFOS sorption; aqueous concentration, pH and Ca²⁺ concentration. Sorption to MWCNT in the sediment–MWCNT mixtures was assessed by subtracting the contribution of PFOS sorption to sediment-only from PFOS sorption to the total sediment–MWCNT mixture. PFOS Log K_D values ranged 0.52–1.62 L kg^?1 for sediment and 1.91–2.90 L kg^?1 for MWCNT present in the sediment. The latter values are relatively low, which is attributed to fouling of MWCNT by sediment organic matter. PFOS sorption was near-linear for sediment (Freundlich exponent of 0.92 ± 0.063) but non-linear for MWCNT (Freundlich exponent of 0.66 ± 0.03). Consequently, the impact of MWCNT on sorption in the mixture was larger at low PFOS aqueous concentration. Effects of pH and Ca²⁺ on PFOS sorption to MWCNT were statistically significant. We conclude that MWCNT fouling and PFOS concentration dependency are important factors affecting PFOS–MWCNT interactions in sediments.     

Modelling atmospheric bulk deposition of Pb,Zn and Cd near a former Pb–Zn mine in West Greenland using transplanted Flavocetraria nivalis lichens

Atmospheric deposition of lead (Pb), zinc (Zn) and cadmium (Cd) was investigated near the former Black Angel Pb–Zn mine in Maarmorilik, West Greenland during 2010–2011. Thalli of the lichen Flavocetraria nivalis were transplanted from an uncontaminated site into sites near the mine and collected the following year. At 20 of the total 21 sites, concentrations of Pb, Zn and Cd were significantly elevated in lichens after 1 year of transplantation compared to initial concentrations. Elevated concentrations were observed within a distance of approx. 20 km from the mining area. Concentrations decreased with increasing distance from the mine and the relation was well described using a power function with a negative exponent (r² = 0.90; 0.83 and 0.83 for Pb; Zn and Cd). To examine the relation between metal concentrations/uptake in lichen transplants and atmospheric bulk deposition, 10 Bergerhoff dust samplers were placed near lichen transplants and samplers and lichens were collected after a 7-weeks exposure period. A significant linear correlation was observed between metal concentrations in lichen transplants and atmospheric bulk metal deposition (r² = 0.94; 0.88 and 0.89 for Pb; Zn and Cd). Combining the results and including an area distribution within a defined metal deposition area, the “annual” deposition of Pb, Zn and Cd as dust was estimated during the 2010–2011 snow-free period (～5 months). The results reveal that 20 years after mine closure, 770 kg Pb, 3700 kg Zn and 24 kg Cd were still being deposited as dust per year (snow-free period only) within a distance of 20 km from the mine.     

Earthworm ecotoxicological assessments of pesticides used to treat seeds under tropical conditions

Ecotoxicological laboratory tests (lower-tier tests) are fundamental tools for assessing the toxicity of pesticides to soil organisms. In this study, using these tests under tropical conditions, we quantified the impact of the insecticides imidacloprid, fipronil, and thiametoxam, and the fungicides captan and carboxin + thiram, all of which are used in the chemical treatment of crop seeds, on the survival, reproduction, and behavior of Eisenia andrei (Oligochaeta). With the exception of imidacloprid, none of the pesticides tested caused mortality in E. andrei in artificial soils. The LC₅₀ of imidacloprid was estimated as 25.53 mg active ingredient kg^?1 of dry soil. Earthworm reproduction rates were reduced by imidacloprid (EC₅₀ = 4.07 mg kg^?1), fipronil (EC₂₀ = 23.16 mg kg^?1), carboxin + thiram (EC₅₀ = 56.38 mg kg^?1), captan (EC₅₀ = 334.84 mg kg^?1), and thiametoxam (EC₅₀ = 791.99 mg kg^?1). Avoidance behavior was observed in the presence of imidacloprid (AC₅₀ = 0.11 mg kg^?1), captan (AC₅₀ = 33.54 mg kg^?1), carboxin + thiram (AC₅₀ = 60.32 mg kg^?1), and thiametoxam (AC₅₀ = >20 mg kg^?1). Earthworms showed a preference for soils with the insecticide fipronil. Imidacloprid was the most toxic of the substances tested for E. andrei. The avoidance test was the most sensitive test for most pesticides studied, but results varied between pesticides. These results offer new insights on the toxicity of pesticides used to treat seeds in tropical regions. However, they should be complemented with higher-tier tests in order to reduce the uncertainties in risk assessment.     

Henry’s law constant measurements for formaldehyde and benzaldehyde as a function of temperature and water composition

Henry’s law constants H of formaldehyde and benzaldehyde were determined using a dynamic system based on the water/air equilibrium at the interface within the length of a microporous tube. The measurements were conducted over the range 273–293 K in (i) deionized water, (ii) 35 g L^?1 solution of NaCl simulating seawater and (iii) two nitric acid solutions, i.e. 0.63 and 6.3 wt%.In pure water, the obtained data were used to derive the following Arrhenius expressions: ln H = (6423 ± 542)/T ? (13.4 ± 2.0) and ln H = (6258 ± 280)/T ? (17.5 ± 1.0) for formaldehyde and benzaldehyde, respectively. The H values, calculated at 293 K from Arrhenius expressions cited above were the following (in units of M atm^?1): H = 5020 ± 1170 (formaldehyde), H = 47 ± 5 (benzaldehyde). The temperature dependence of H permits then to derive the solvation enthalpies for both compounds: ΔH_solv = ?(53.4 ± 4.5) kJ mol^?1 and ΔH_solv = ?(52.0 ± 2.3) kJ mol^?1 for formaldehyde and benzaldehyde, respectively.In 35 g L^?1 salt solution, the H values were 27–66% and 12–21% lower than their respective determinations in deionized water, for formaldehyde and benzaldehyde respectively. The observed salt effect was used to estimate the following Setschenow coefficients at 293 K for 0.6 M NaCl: formaldehyde (0.21) and benzaldehyde (0.09).In 6.3 wt% nitric acid solution, H values of benzaldehyde were approximately 30% higher than those found in pure water although no significant influence was observed for formaldehyde.Finally, our experimental data were then used to estimate the fractions of formaldehyde and benzaldehyde in atmospheric aqueous phase and their derived atmospheric lifetimes.     

Influence of competing inorganic cations on the ion exchange equilibrium of the monovalent organic cation metoprolol on natural sediment

The aim of this study was to systematically investigate the influence of the mono- and divalent inorganic ions Na⁺ and Ca²⁺ on the sorption behavior of the monovalent organic cation metoprolol on a natural sandy sediment at pH = 7. Isotherms for the beta-blocker metoprolol were obtained by sediment–water batch tests over a wide concentration range (1–100 000 μg L^?1). Concentrations of the competing inorganic ions were varied within freshwater relevant ranges. Data fitted well with the Freundlich sorption model and resulted in very similar Freundlich exponents (n = 0.9), indicating slightly non-linear behavior. Results show that the influence of Ca²⁺ compared to Na⁺ is more pronounced. A logarithmic correlation between the Freundlich coefficient K_Fr and the concentration or activity of the competing inorganic ions was found allowing the prediction of metoprolol sorption on the investigated sediment at different electrolyte concentrations. Additionally, the organic carbon of the sediment was completely removed for investigating the influence of organic matter on the sorption of metoprolol. The comparison between the experiments with and without organic carbon removal revealed no significant contribution of the organic carbon fraction (0.1%) to the sorption of metoprolol on the in this study investigated sediment. Results of this study will contribute to the development of predictive models for the transport of organic cations in the subsurface.     

Influence of water quality parameters on occurrence of polybrominated diphenyl ether in sediment and sediment to biota accumulation

Polybrominated diphenyl ether (PBDE) concentrations in sediment and fish from 12 principal rivers in Taiwan were investigated to determine their association with water quality parameters as well as the biota-sediment accumulation factor (BSAF) in fish with different living patterns. The highest PBDE concentration in sediment was found in the Bajhang River (261 ng g^?1 dry weight (d.w.)) and the lowest in the Beinan River and the Da-an River (0.17 ng g^?1 d.w.). The PBDE concentrations in fish samples ranged from 1.28 ng g^?1 d.w. (Oreochromis niloticus niloticus) in the Yanshuei River to 33.7 ng g^?1 d.w. (Varico rhinos barbatulus) in the Da-an River. We conclude that PBDEs contamination in sediment was significantly affected by NH₃–N, pH, and DO. The BSAF results showed a parabolic trend from low- to high-brominated BDEs. Fish easily accumulated the congeners BDE-47, -100, -119, -126, and -154 from sediment. The BSAF decreased in the following order: PeBDE > HxBDE > TeBDE > other BDEs. Principle component analysis showed that demersal fish have different PBDE sources than do pelagic fish. We conclude that living and feeding habits are critical factors affecting PBDE accumulation in fish.