Strategies for improving the photocatalytic performance of metal-organic frameworks for CO2 reduction: A review

Photocatalytic CO₂ reduction is an appealing strategy for mitigating the environmental effects of greenhouse gases while simultaneously producing valuable carbon-neutral fuels. Numerous attempts have been made to produce effective and efficient photocatalysts for CO₂ reduction. In contrast, the selection of competitive catalysts continues to be a substantial hindrance and a considerable difficulty in the development of photocatalytic CO₂ reduction. It is vital to emphasize different techniques for building effective photocatalysts to improve CO₂ reduction performance in order to achieve a long-term sustainability. Metal-organic frameworks (MOFs) are recently emerging as a new type of photocatalysts for CO₂ reduction due to their excellent CO₂ adsorption capability and unique structural characteristics. This review examines the most recent breakthroughs in various techniques for modifying MOFs in order to improve their efficiency of photocatalytic CO₂ reduction. The advantages of MOFs using as photocatalysts are summarized, followed by different methods for enhancing their effectiveness for photocatalytic CO₂ reduction via partial ion exchange of metal clusters, design of bimetal clusters, the modification of organic linkers, and the embedding of metal complexes. For integrating MOFs with semiconductors, metallic nanoparticles (NPs), and other materials, a number of different approaches have been also reviewed. The final section of this review discusses the existing challenges and future prospects of MOFs as photocatalysts for CO₂ reduction. Hopefully, this review can stimulate intensive research on the rational design and development of more effective MOF-based photocatalysts for visible-light driven CO₂ conversion.     

Advances in photocatalytic disinfection of bacteria: Development of photocatalysts and mechanisms

Photocatalysis has attracted worldwide attention due to its potential in solar energy conversion. As a “green” advanced oxidation technology, it has been extensively used for water disinfection and wastewater treatment. This article provides a review of the recent progress in solar energy-induced photocatalytic disinfection of bacteria, focusing on the development of highly efficient photocatalysts and their underlying mechanisms in bacterial inactivation. The photocatalysts are classified into TiO₂-based and non-TiO₂-based systems, as TiO₂ is the most investigated photocatalyst. The synthesis methods, modification strategies, bacterial disinfection activities and mechanisms of different types of photocatalysts are reviewed in detail. Emphasis is given to the modified TiO₂, including noble metal deposition, non-metal doping, dye sensitization and composite TiO₂, along with typical non-TiO₂-based photocatalysts for bacterial disinfection, including metal oxides, sulfides, bismuth metallates, graphene-based photocatalysts, carbon nitride-based photocatalysts and natural photocatalysts. A simple and versatile methodology by using a partition system combined with scavenging study is introduced to study the photocatalytic disinfection mechanisms in different photocatalytic systems. This review summarizes the current state of the work on photocatalytic disinfection of bacteria, and is expected to offer useful insights for the future development in the field.     

Efficient degradation of organic pollutants by S-NaTaO3/biochar under visible light and the photocatalytic performance of a permonosulfate-based dual-effect catalytic system

Removing large concentrations of organic pollutants from water efficiently and quickly under visible light is essential to developing photocatalytic technology and improving solar energy efficiency. This study used a simple hydrothermal method to prepare a non-metallic, S-doped NaTaO₃ (S-NTO) photocatalyst, which was then loaded onto biochar (BC) to form a S-NTO/BC composite photocatalyst. After uniform loading onto BC, the S-NTO particles transformed from cubic to spherical. The photogenerated electron-hole pair recombination probability of the composite photocatalyst was significantly lower than those of the NTO particles. The light absorption range of the catalyst was effectively widened from 310 nm UV region to visible region. In addition, a dual-effect catalytic system was constructed by introducing peroxymonosulfate (PMS) into the environment of the pollution to be degraded. The Rhodamine B, Methyl Orange, Acid Orange 7, tetracycline, and ciprofloxacin degradation efficiency at 40 mg/L reached 99.6%, 99.2%, 84.5%, 67.1%, and 70.7%, respectively, after irradiation by a 40 W lamps for 90 min. The high-efficiency visible-light catalytic activity of the dual-effect catalytic system was attributed to doping with non-metallic sulfur and loading of catalysts onto BC. The development of this dual-effect catalytic system provides new ideas for quickly and efficiently solving the problem of high-concentration organic pollution in aqueous environments, rationally and fully utilizing solar energy, and expanding the application of photocatalytic technology to practice.     

In situ preparation of visible-light-driven carbon quantum dots/NaBiO3 hybrid materials for the photoreduction of Cr(VI)

In this study, different carbon quantum dots (CQDs)/NaBiO₃ hybrid materials were synthesized as photocatalysts to effectively utilize visible light for the photocatalytic degradation of contaminants effectively. These hybrid materials exhibit an enhanced photocatalytic reduction of hexavalent chromium (Cr(VI)) in the aqueous medium. Zero-dimensional nanoparticles of CQDs were embedded within the two-dimensional NaBiO₃ nanosheets by the hydrothermal process. Compared with that of the pure NaBiO₃ nanosheets, the photocatalytic performance of the hybrid catalysts was significantly high and 6 wt.% CQDs/NaBiO₃ catalyst exhibited better photocatalytic performance. We performed the first-principles density functional theory calculations to study the interfacial properties of pure NaBiO₃ nanosheets and hybrid photocatalysts, and confirmed the CQDs played an important role in the CQDs/NaBiO₃ composites. The experimental results indicated that the enhanced reduction of Cr(VI) was probably due to the high loading of CQDs (electron acceptor) on NaBiO_3, which made NaBiO₃ nanomaterials to respond in visible light and significantly improved their electron-hole separation efficiency.     

Biogenic C-doped titania templated by cyanobacteria for visible-light photocatalytic degradation of Rhodamine B

Cyanobacteria, which occurred in eutrophic water harvest solar light to carry out photosynthesis with high efficiency. In this work, cyanobacteria （Microcystis sp.） were used as biotemplate to synthesize titania structure. The synthesized titania sample had similar morphology to that of the original template in spite of the fragile unicellular structures and extremely high water content of cyanobacterial cells. Incorporation of biogenic C, as well as the morphology inherited from biotemplate improved visible- light absorbance of the titania structure. The sample exhibited higher visible-light photocatalytic activity than commercial titania photocatalyst Degussa P25 for Rhodamine B （RhB） degradation. Compared with those C-doped titania photocatalysts prepared by other methods, cyanobacteria templated titania photocatalyst offer some potential for competitive advantages. The reported strategy opened up a new use for the cyanobacteria. It could also be used for titania in applications such as treatment of polluted water, dye-sensitized solar cells, or other regions.     

Synthesis and enhanced visible-light responsive of C,N,S-tridoped TiO2 hollow spheres

C,N,S-tridoped TiO2 hollow spheres （labeled as C,N,S-THs） were synthesized using carbon spheres as template and C,N,S-tridoped TiO2 nanoparticles as building blocks. The structure and physicochemical properties of the catalysts were characterized by X- ray diffraction （XRD）, scanning electron microscopy （SEM）, UV-Vis diffuse reflectance spectrum （DRS）, N2 adsorption-desorption isotherms, X-ray photoelectron spectroscopy （XPS） and Photoluminescence emission spectroscopy （PL）. The results showed that the hollow spheres had average diameter of about 200 nm and the shell thickness was about 20 nm. The tridoped TiO2 hollow spheres exhibited strong absorption in the visible-light region. C,N,S-tridoped could narrow the band gap of the THs by mixing the orbit O 2p with C 2p, N 2p and S 3p orbits and shift its optical response from ultraviolet （UV） to the visible-light region. PL analysis indicated that the electron-hole recombination rate of TiO2 hollow spheres had been effectively inhibited when doped with C, N and S elements. The photocatalytic activities of the samples were evaluated for the degradation of X-3B （Reactive Brilliant Red dye, C.I. Reactive Red 2） aqueous solution under visible-light （λ 〉 420 nm） irradiation. It was found that the C,N,S-tridoped TiO2 hollow spheres indicated higher photocatalytic activity than commercial P25 and the undoped counterpart photocatalyst.     

Removal of elemental mercury by photocatalytic oxidation over La2O3/Bi2O3 composite

La₂O₃/Bi₂O₃ photocatalysts were prepared by impregnation of Bi₂O₃ with an aqueous solution of lanthanum precursor followed by calcination at different temperatures. The composite materials were used for the first time for the photocatalytic removal of Hg⁰ from a simulated flue gas under UV light irradiation. The results showed that the sample containing 6 wt.% La₂O₃ and calcined at 500°C has the highest dispersion of the active sites, which was promoted by the strong interaction with the support (i.e., the formation of Bi-O-La species). Since they are fully accessible on the surface, the material also exhibits excellent optical properties while the heterojunction formed in La₂O₃/Bi₂O₃ promotes the separation and migration of photoelectron-hole pairs and thus Hg⁰ oxidation efficiency is enhanced. The effects of the various factors (e.g., the reaction temperature and composition of the simulated flue gas (i.e., O₂, NO, H₂O, and SO₂)) on the efficiency of the Hg⁰ photocatalytic oxidation were investigated. The results demonstrated that O₂ and SO₂ enhanced the efficiency of the reaction while the reaction temperature, NO, and H₂O had an inhibitory effect.     

C3N4/BiOBr复合可见光催化剂的性能及其作用机制

利用水热合成法制备了C_3N_4/BiOBr复合可见光催化剂,通过XRD、FT-IR、SEM、DRS、PL等手段对催化剂的物相组成和光化学性能进行了系统表征,利用对罗丹明B(RhB)的降解实验评价了催化剂在可见光照下的光催化降解活性和稳定性并通过ESR分析和自由基捕获实验探究了RhB的光催化降解机制.结果表明,水热合成法可成功制备结晶性能良好的C_3N_4/BiOBr复合可见光催化剂;C_3N_4的复合降低了BiOBr光催化剂的电子-空穴的复合,提高了光催化降解活性,其中15%C_3N_4/BiOBr的活性最佳,可见光照18 min后RhB的脱色率达100%,较纯BiOBr提高了1.5倍,且重复使用5次后仍具有较高的光催化降解活性;复合催化剂光催化降解RhB过程中参与降解的主要活性物种为空穴(h~+)和超氧自由基(·O_2~-),其中h~+影响更为显著.     

二氧化钛复合纸板对壬基酚聚氧乙烯醚水溶液的光催化降解

制备了一系列无机物含量大于80%的植物纤维/吸附剂/二氧化钛复合纸板,考察了复合纸板对壬基酚聚氧乙稀醚(NP-10)水溶液的光催化降解性能.结果表明,二氧化钛复合纸板对NP-10具有优良光催化降解性能,紫外光照34h后浓度为50mg·mL-1的NP-10的降解率达80%以上,光照前后NP-10水溶液的化学需氧量(COD)的变化表明,光催化降解可导致NP-10矿化.活性炭对二氧化钛光催化降解有协同作用,其在无机粉体中的质量分数为15%时,复合纸板的光催化降解性能最好.过氧化氢可大幅提高复合纸板的光催化降解性能,其最佳浓度为20mg·mL-1.二氧化钛复合纸板在NP-10水溶液中的稳定性好,重复使用10次后其质量损失小于2%,光催化降解性能不变.     

Porous FeOx/BiVO4-δS0.08：Highly efficient photocatalysts for the degradation of Methylene Blue under visible-light illumination

Porous S-doped bismuth vanadate with an olive-like morphology and its supported iron oxide （y wt.% FeOx/BiVO4-δS0.08, y = 0.06, 0.76, and 1.40） photocatalysts were fabricated using the dodecylamine-assisted alcohol-hydrothermal and incipient wetness impregnation methods, respectively. It is shown that the y wt.% FeOx/BiVO4-δS0.08 photocatalysts contained a monoclinic scheetlite BiVO4 phase with a porous olive-like morphology, a surface area of 8.8-9.2 m^2/g, and a bandgap energy of 2.38-2.42 eV. There was co-presence of surface Bi^5＋, Bi^3＋, V^5＋, V^3＋, Fe^3＋, and Fe^2＋ species in y wt.% FeOx/BiVO4-δS0.08. The 1.40 wt.% FeOx/BiVO4-δS0.08 sample performed the best for Methylene Blue degradation under visible-light illumination. The photocatalytic mechanism was also discussed. We believe that the sulfur and FeOx co-doping, higher oxygen adspecies concentration, and lower baudgap energy were responsible for the excellent visible-light-driven catalytic activity of 1.40 wt.% FeOx/BiVO4-δS0.08.