Leaching of bisphenol A (BPA) to seawater from polycarbonate plastic and its degradation by reactive oxygen species

In this study, (1) change in the concentration of bisphenol A (BPA) leached from polycarbonate (PC) tube to control water (BPA free), seawater and river water at 20 and 37 degrees C as a function of time, (2) the fate of BPA caused by addition of H(2)O(2) and Fe(3+) to seawater containing BPA leached from PC tube were assessed. BPA leached from PC tube to all water samples increased with the ascendant of temperature and with the passage of time. The BPA leaching velocity in seawater was the fastest in three samples (11 ng/day for seawater, 4.8 ng/day for river water 0.8 ng/day for control water at 37 degrees C).BPA leaching velocity from PC tube was significantly high at pH 8 (50 mM Na(2)HPO(4)) and increased dose-dependently. There was no difference in the velocity of BPA among the 50 mM phosphate-buffers at pH 6.5, 7.0 and 7.5. BPA was leached three times higher by addition of Na(+) than K(+). However, the higher the K(+) concentration, the larger the BPA leached from PC tube. Na(+) mixed with PO(4)(-) was effective on BPA leaching from PC tube, but not with SO(4)(-) or Cl(-). The results suggested that BPA leaching from PC tube would be attributed to the concentration of bibasic phosphate such as Na(2)HPO(4) and K(2)HPO(4) in water samples. BPA was degraded in both control water and seawater in the presence of radical oxygen species, but the degradation rate was lower in seawater than in control water, suggesting that anti-oxidative system exists in seawater. Neo-synthesized substance in both control water and seawater in the presence of reactive oxygen species was identified as BPA-quinone by LC-MS.     

Chlorination of bisphenol A: kinetics and by-products formation

The kinetics of initial chlorination of bisphenol A (BPA) was studied between pH 2 and 11 at room temperature (20 +/- 2 degrees C). pH Profile of the apparent second-order rate constant of the reaction of BPA with chlorine were modeled considering the elementary reactions of HOCl with BPA species and an acid-catalyzed reaction. The predominant reactions at near neutral pH were the reactions of HOCl with the two phenolate species of BPA (k = 3.10 x 10(4) M(-1)s(-1) for BPA- and 6.62 x 10(4) M(-1) s(-1) for BPA(2-)). At near neutral pH, half-life times of BPA were calculated to be less than 1.5 h for chlorine residual higher than 0.2 mg l(-1). Chlorination of synthetic treated waters spiked with BPA showed that BPA disappeared within 4 h and that chlorinated bisphenol A congeners were rapidly formed and remained in solution for up to 10-20 h when low chlorine dosages are applied (0.5-1 mg l(-1)). To limit their presence in drinking water networks, it is then necessary to maintain high chlorine residuals that rapidly produce and decompose chlorinated bisphenol A congeners.     

Degradation of bisphenol-A (BPA) in the presence of reactive oxygen species and its acceleration by lipids and sodium chloride

In this study, (1) change in bisphenol-A (BPA) leached from polycarbonate (PC) tube to water samples at 37 degrees C, (2) effect of reactive oxygen species (ROS) produced by Fenton reaction on BPA recovery and thiobarbituric acid (TBA) value with or without generally existing environmental substances such as alcohol, lipids and NaCl, were investigated. Amounts of BPA leached from PC tube to water samples containing lipids possessing unsaturated fatty acid with high TBA values were significantly lower than the amount of BPA to water only, and addition of NaCl to lipid containing water further decreased BPA concentration. The result indicates that BPA could be degraded by lipoperoxides formed by auto-oxidation of lipid, and NaCl plays an important role in BPA degradation. In the presence of ROS, BPA recovery was the lowest in water and addition of EtOH increased in both BPA recovery and TBA value, suggesting that EtOH could play a role as scavenger of ROS on the oxidative BPA degradation. Furthermore, the higher the concentration of lipid and/or NaCl, the lower the BPA recovery and TBA value. Physiologically and environmentally important concentrations of NaCl could enhance oxidative degradation of BPA in the presence of ROS.     

The fate of acephate and carbaryl in water.

Acephate was resistent to hydrolysis in distilled, buffered water at pH 4.0 to 6.9, but not at pH 8.2, held for 20 days at 20 or 30 degrees C. The maximum conversion to methamidophos was 4.5% of the added acephate at pH 8.2 and 20 degrees C. The persistence of acephate in two natural waters, held at 9 degrees C for up to 42 and 50 days varied: 80% were recovered from pond water after 42 days, and 45% from creek water after 50 days. Rates of acephate degradation increased greatly when treated water samples were incubated in the presence of sediments, but not if water and sediment were autoclaved prior to treatment and incubation. The greatest conversion to methamidophos, 1.3% of the added acephate, had occurred after 42 days in pond water without sediment. Under the same conditions, carbaryl was less persistent than acephate in the natural waters: 18 to 20% were recovered from pond water after 42 days, and 37 to 40% from creek water after 50 days. The presence of sediment did not affect its degradation significantly. But more than 55% were recovered after 50 days if water and sediment were autoclaved prior to treatment and incubation. Neither acephate, methamidophos, nor carbaryl could be shown to escape from water into the atmosphere.     

Leaching of bisphenol A (BPA) from polycarbonate plastic to water containing amino acids and its degradation by radical oxygen species

In this study, (1) the change in the concentration of bisphenol A (BPA) leached from polycarbonate plastic (PCP) tube to water samples containing phosphate, sodium barbital, glycine, methionine or albumin at 37 degrees C as a function of time, and (2) the degradation rate of BPA leached from PCP tube to amino acid solutions in the presence of radical oxygen species (ROS) were investigated. The BPA leaching velocity (BPA-LV) from PCP tube to 50 mM glycine at pH 6 or 7 was twice that to control water, and the leaching was enhanced above pH 8. At pH 11, BPA-LV was significantly higher in 50 mM glycine and methionine solutions than in 50 mM NaOH. These results indicate that basic pH and amino acids contained in water could accelerate BPA leaching. The BPA-LV in phosphate buffer was different from the BPA-LVs in other buffers (barbital and glycine) at the same pH. BPA leached to the glycine or methionine solutions at pH 11 was degraded time dependently in a similar manner as the control water in the presence of ROS. The degradation of leached BPA was inhibited in the glycine solution, but was accelerated in the methionine solution. However, degradation of BPA added to freshly prepared methionine was inhibited in a similar manner to BPA in glycine. BPA degradation could be influenced by some kinds of amino acids, but glycine and methionine might be involved in BPA degradation in different ways.     

The effect of ageing on the toxicity of zinc for the potworm Enchytraeus albidus.

Different extractable zinc fractions and the ecotoxicity of zinc in Enchytraeus albidus were assessed using freshly spiked artificial soils and spiked soils which had been aged for 8 weeks. Standard artificial Organization for Economic Cooperation and Development (OECD)-soils were aged in four different ways: (1) storing at 20 degrees C; (2) percolation followed by storing at 20 degrees C; (3) alternately heating at 60 degrees C and storing at 20 degrees C; and (4) alternately freezing at -20 degrees C and storing at 20 degrees C. Ageing had no clear influence on the pore water concentration, the water soluble and the calcium chloride extractable fraction of zinc in the artificial soils. Similarly, the 21d LC50 and the 42d EC50(reproduction) for E. albidus were not influenced by the different treatments. This absence of zinc fixation in the artificial soil during ageing was probably due to the use of kaolinite clay in OECD-soil.     

The occurrence of xenoestrogens in the Elbe river and the North Sea

The xenoestrogens Bisphenol A (BPA), p-alkylphenols and p-alkylphenol ethoxylates were determined in water samples of the North Sea, the Elbe river, and its tributaries Schwarze Elster, Mulde, Saale and the Weisse Elster. The sampling sites of the Elbe river reached from Schmilka at the German-Czech border to Cuxhaven at the estuary. Samples of the North Sea were taken in the German Bight. Additionally, freshly deposed sediments of the River Elbe and its tributaries were analyzed. Partitioning coefficients of these compounds for the distribution between suspended particulate matter (SPM) and the aqueous phase were calculated for samples of the River Elbe at sampling site Geesthacht. The analytical procedure consisted of liquid-liquid extractions of the acidified water samples using dichloromethane. Sediments and SPM samples were extracted by Accelerated Solvent Extraction with n-hexane/acetone. Following a clean-up by HPLC, the analytes were derivatized with heptafluorobutyric acid anhydride and quantified using GC-MSD. The concentration ranges of the compounds analyzed in water samples of the Elbe river were as follows (in ng l(-1)): BPA 9-776, alkylphenols 10-221 and alkylphenol ethoxylates 18-302. In sediment samples the concentrations were (in microg kg(-1) dry mass): BPA 66-343, alkylphenols 17-1378 and alkylphenol ethoxylates 30-1797. In samples of the North Sea the concentrations were generally about 1 order of magnitude lower. As shown by the concentration profiles following the River Elbe into the North Sea, the Elbe river must be considered as a major pollution source for the North Sea concerning the compounds analyzed. The SPM/water-partitioning coefficients calculated (mean values) amounted to: BPA 4.50, alkylphenols 5.52-5.58 and alkylphenol ethoxylates 5.60-6.38. A comparison of the results with data from other surface waters showed that concentrations of these xenoestrogens in the River Elbe and its tributaries were relatively low. The evaluation of the data based on the lowest observable effect concentration (LOEC) for alkylphenols (endpoint: vitellogenin synthesis in male trout) indicated that the concentrations were well below the effectivity threshold.     

Determination of 4-tert-octylphenol, 4-nonylphenol and bisphenol A in surface waters from the Haihe River in Tianjin by gas chromatography-mass spectrometry with selected ion monitoring

The estrogenic pollutants 4-tert-octylphenol (OP), 4-nonylphenol (NP) and bisphenol A (BPA) were determined in surface water samples from the Haihe River, Tianjin, China. The analytes were extracted and concentrated from 300 ml acidified water samples by liquid–liquid extractions using dichloromethane, derivatized with trifluoroacetic anhydride, and quantified by gas chromatography–mass spectrometry (GC–MS) with selected ion monitoring (SIM). Among the samples collected from 14 sampling sites, only one sample was found to have a relatively high concentration of BPA (8.30 μg l⁻¹) and NP (0.55 μg l⁻¹). The concentrations of OP, NP and BPA in the other samples were in the range of 18.0–20.2, 106–296 and 19.1–106 ng l⁻¹, respectively. Recoveries for OP, NP and BPA in the spiked water samples were all over 80%.     

Dissipation of the herbicide clopyralid in an allophanic soil: laboratory and field studies

Soil dissipation of the herbicide clopyralid (3,6-dichloropicolinic acid) was measured in laboratory incubations and in field plots under different management regimes. In laboratory studies, soil was spiked with commercial grade liquid formulation of clopyralid (Versatill, 300 g a.i. L(-1) soluble concentrate) @ 0.8 microg a.i. g(-1) dry soil and the soil water content was maintained at 60% of water holding capacity of the soil. Treatments included incubation at 10 degrees C, 20 degrees C, 30 degrees C, day/night cycles (25/15 degrees C) and sterilized soil (20 degrees C). Furthermore, a field study was conducted at the Waikato Research Orchard near Hamilton, New Zealand starting in November 2000 to measure dissipation rates of clopyralid under differing agricultural situations. The management regimes were: permanent pasture, permanent pasture shielded from direct sunlight, bare ground, and bare ground shielded from direct sunlight. Clopyralid was sprayed in dilute solution @ 600 g a.i. ha(-1) on to field plots. Herbicide residue concentrations in soil samples taken at regular intervals after application were determined by gas chromatograph with electron capture detector. The laboratory experiments showed that dissipation rate of clopyralid was markedly faster in non-sterilized soil (20 degrees C), with a half-life (t1/2) of 7.3 d, than in sterilized soil (20 degrees C) with t1/2 of 57.8 d, demonstrating the importance of micro-organisms in the breakdown process. Higher temperatures led to more rapid dissipation of clopyralid (t1/2, 4.1 d at 30 degrees C vs 46.2 d at 10 degrees C). Dissipation was also faster in the day/night (25/15 degrees C) treatment (t1/2, 5.4 d), which could be partly due to activation of soil microbes by temperature fluctuations. In the field experiment, decomposition of clopyralid was much slower in the shaded plots under pasture (t1/2, 71.5 d) and bare ground (t1/2, 23.9 d) than in the unshaded pasture (t1/2, 5.0 d) and bare ground plots (t1/2, 12.9 d). These studies suggest that environmental factors such as temperature, soil water content, shading, and different management practices would have considerable influence on rate of clopyralid dissipation.     

Aerobic degradation of bisphenol A by Achromobacter xylosoxidans strain B-16 isolated from compost leachate of municipal solid waste

A novel bacterium designated strain B-16 was isolated from the compost leachate of the municipal solid waste (MSW) in a laboratory reactor. This strain was identified as a gram-negative bacterium, Achromobacter xylosoxidans that could grow on bisphenol A (BPA, a representative endocrine disruptor) as a sole carbon source under aerobic condition. BPA-degrading characteristics of strain B-16 were investigated in liquid cultures. The results show that BPA degradation was influenced by several factors (e.g. inoculum size, substrate concentration, temperature and pH, etc). The half-lives, optimum temperature and pH were found to be 0.58-3.1d, 35 degrees C and 7.0, respectively. BPA-degrading activity and cell growth were inhibited at high substrate concentration. Metabolic intermediates detected during the degradation process were identified as p-hydroxybenzaldehyde, p-hydroxybenzoic acid and p-hydroquinone, respectively. Metabolic pathway of BPA degradation was proposed in this study.     

Mass flows of endocrine disruptors in the Glatt River during varying weather conditions

This study focused on the occurrence and behaviour in wastewater and surface waters of several phenolic endocrine disrupting compounds (EDCs) including parabens, alkylphenolic compounds, phenylphenol (PhP) and bisphenol A (BPA). Analytical procedures using solid-phase-extraction and LC-MS/MS techniques were applied to samples of influents and effluents of wastewater treatment plants (WWTPs) discharging into the Glatt River (Switzerland) as well as to river water samples. A mass flow analysis provided insight into the main sources and the fate of these contaminants during different weather conditions. Concentrations in influents were in the low μg/L range for most analytes. Removal of parabens in the WWTPs was mostly above 99%. Nonylphenol polyethoxylates (A₉PEO) removal amounted to 98%, but in some cases nonylphenoxy acetic acid (A₉PEC) or nonylphenols (NP) were formed. In effluents, concentrations were highest for the A₉PEC, A₉PEO and NP. Concentrations in river water were in the high ng/L range for alkylphenolic compounds and in the low ng/L range for BPA, PhP and the parabens. During the sampling period, in which several rain events occurred, both water flows and mass flows varied strongly. Mass flows in WWTP effluents and in the river increased with increasing water flows for most compounds indicating that higher water flows do not lead necessarily to a proportional dilution of the pollutants. Throughout the low water flow period, mass flows predicted from the known inputs were similar to the actual mass flows at the end of the river for most analytes. For none of the EDCs, significant in-stream removal could be observed. In the periods with high water flows, mass flows in the river were much higher than can be explained by the initially defined sources. Discharge of untreated wastewater influent into the river was assessed as an additional source. Adding this source improved the mass balance for some, but not all of the analytes.     

Determination of Henry's law constant for methyl tert-butyl ether (MTBE) at groundwater temperatures

The dimensionless Henry's law constant was determined for methyl tert-butyl ether (MTBE) at six temperatures (3, 5, 10, 15, 20 and 25 degrees C) by using a thermostatted flask (430 ml) containing an aqueous MTBE solution. The ratio between the gas phase and the water phase in the flask was approximately 1.7:1. The aim of this study was to acquire data needed to model the behaviour of MTBE at groundwater conditions. The dimensionless Henry's law constant at 10 degrees C is approximately 0.01 but is 0.03 at 25 degrees C. This is important for modelling MTBE because the variation of vaporization cannot be disregarded at groundwater temperatures. In a second experiment the water solubility of MTBE was determined to be 62.1 g/l at 5 degrees C and 35.5 g/l at 20 degrees C). The high solubility at low temperatures could cause MTBE plumes from spills (fuel accidents etc.) to spread rapidly.     

Endocrine disruptors in freshwater streams of Hesse, Germany: changes in concentration levels in the time span from 2003 to 2005

Four small freshwater streams in the region known as Hessisches Ried in Germany were investigated with respect to the temporal and spatial concentration variations of the endocrine disruptors bisphenol A (BPA), 4-tert-octylphenol (4-tert-OP), and the technical isomer mixture of 4-nonylphenol (tech.-4-NP). Measured concentrations of the target compounds in the river water samples ranged from <20 ng/l to 1927 ng/l, <10 ng/l to 770 ng/l, and <10 ng/l to 420 ng/l for BPA, 4-tert-OP and tech.-4-NP, respectively. BPA levels were, with the exception of two samples, below the predicted no-effect concentration (PNEC) for water organisms. Tech.-4-NP concentrations showed a significant tendency of decreasing concentrations during the sampling period. This is mainly attributed to the implementation of the European Directive 2003/53/EG, which restricts both the marketing and use of nonylphenols. Results from the analysis of additionally collected water samples from sewage treatment plant (STP) effluents indicate that the STPs cannot be the only sources for tech.-4-NP found in the river water.     

Kinetics of low frequency sonodegradation of linear alkylbenzene sulfonate solutions

The decomposition of sodium dodecylbenzene sulfonate (SDBS) in water by means of ultrasound irradiation at 20kHz was investigated. Experiments were conducted at surfactant concentrations of 175, 260 and 350 mg l(-1), liquid volumes of 120, 170 and 220 ml, temperatures of 20, 30 and 45 degrees C and applied power of 40, 80 and 125 W. The extent of degradation was followed monitoring substrate and organic carbon concentrations, while hydrogen peroxide concentration was also measured; the latter is a product of water sonolysis due to hydroxyl radical recombination. 80% SDBS conversion was achieved after 120 min of sonication at 125 W and 30 degrees C; nonetheless, SDBS and its degradation intermediates proved difficult to oxidise as only about 20-25% of the initial carbon content was transformed to carbon dioxide. At the initial stages of the reaction, degradation rate appears to be only weakly dependent on the substrate concentration with the rate increasing from 3.1 to 4 mg l(-1)min(-1) with increasing concentration from 175 to 350 mg l(-1). Degradation appears to occur at the bubble-liquid interface through hydroxyl radical-mediated reactions whose role was established by performing experiments in the presence of radical scavengers, namely potassium bromide and sodium benzoate. Degradation rates increased with increasing power and decreasing temperature and volume.     

Screening of compost for PAHs and pesticides using static subcritical water extraction.

Static subcritical water extraction (SubWE) along with solid phase extraction (SPE) was used for the analysis of PAHs and pesticides in municipal solid waste compost. Yields obtained for PAHs in certified reference sediment (CRM 104) were acceptable. The extraction method was simple, rapid, used small sample sizes, and no sample drying was required. Analysis of samples was performed by GC/MS and HPLC. Recovery of spiked pesticides was greatest at 110 degrees C for 20 min extraction time. The optimum extraction for PAH analysis was achieved at 150 degrees C for 20 min. Addition of C-18 resin as an "alternate sorbent" upon cooling increased recovery of PAHs but not of pesticides, however, it increased the stability of atrazine and propazine at higher temperatures. Analysis of three municipal compost samples from the Dayton, OH (USA) area showed no pesticides above the detection limit, however, PAH totals for 11 PAHs were 15.97, 14.42, and 20.79 microg g(-1). The totals of six of the seven carcinogenic PAHs, for which remediation goals in the United States is 4.6 microg g(-1), were determined to be 9.89, 6.77, and 13.06 microg g(-1) dry weight. The highest PAH totals were obtained from compost containing sewage sludge.     

Duo-molecularly imprinted polymer-coated magnetic particles for class-selective removal of endocrine-disrupting compounds from aqueous environment

The removal of steroid and phenolic endocrine-disrupting compounds (EDCs) from an aqueous environment was investigated using magnetic particles encapsulated by a duo-molecularly imprinted polymer (duo-MIP). The effect of environmental variables on the binding efficiency was studied. Experimental results showed that the amount of EDCs adsorbed was neither affected by up to 10.0 mM NaCl nor significantly interfered by up to 10.0 mg/L humic acid. Negligible influence was observed from pH 3.3 to pH 6.8, but a decrease started at pH 9. Freundlich isotherm parameters indicated binding capacities in the order of DES?>?E2?～?E1?>?BPA. The applicability of class-selective removal was verified using river water samples spiked with these EDCs at 10 μg/L; the binding efficiencies were 90, 90, 88, and 98 % for estrone (E1), 17β-estradiol (E2), bisphenol A (BPA), and diethylstilbestrol (DES), respectively. A reuse investigation verified constant binding capacities exhibiting <2 % reduction after seven cycles of regeneration.     

Time-integrated sampling of glyphosate in natural waters

Environmental monitoring of pesticide residues in surface water is often done with time-integrated sampling where a specified volume is sampled each hour during, e.g., a week, thus avoiding at momentary high or low extreme concentrations. However, sampling over an extended period of time can result in losses of easily degradable analytes, why the stability of the target analytes over the timespan of the sampling must be checked. Glyphosate is one of the most widely used herbicides. Because of its chemical complexity, glyphosate binds differently to metals and colloids at different pH, and the degradation may also be affected. Recovery of glyphosate from spiked natural waters after 1 and 3 weeks of storage was higher when the samples were acidified to approximately pH 2 rather than at their natural pH. Keeping the samples refrigerated to 4 °C in darkness also enhanced recovery, while glyphosate losses were substantial from samples kept at their natural pH at 20 °C. Total loss of glyphosate was observed in some samples kept at natural pH, 20 °C, and daylight; a loss partly due to binding to metals or colloids that could only partially be reversed by acidification. For 1-week time-integrated sampling a small amount of hydrochloric acid in a piece of heat-sealed hydrophobic micro-porous tubing is added to the sampling bottles before deployment, a procedure that acidifies the samples during collection keeping them below pH 2 until analysis, thus minimising losses of glyphosate. The method also allows determination of the primary degradation product aminomethylphosphonic acid (AMPA).     

Effects of temperature and water content on degradation of isoproturon in three soil profiles

The phenylurea herbicide isoproturon, 3-(4-isopropylphenyl)-1,1-dimethylurea (IPU), is widely used to control pre- and post-emergence of grass and broad-leaved weeds in cereal crops. Its degradation in soils is a key process for assessing its leaching risk to groundwater resources. The degradation properties of various samples from surface and subsurface soil (down to 1m depth) of a heterogeneous agricultural field were studied using (14)C-IPU. Laboratory incubations were carried out at 22 and 10 degrees C and at water contents 90% and 50% of the estimated water holding capacity (eWHC) corresponding to water potentials between -56 kPa and -660 MPa. Degradation was found to be more sensitive to water content variations than to temperature variations in the ranges that we used. For surface layers, at 10 and 22 degrees C, the degradation half-life increased by a factor 10 and 15, respectively, when water content decreased from 90% to 50% eWHC. Under optimal degradation conditions (i.e. 22 degrees C and 90% eWHC), 3-(4-isopropylphenyl)-1-methylurea (MDIPU) was the main metabolite in surface samples. At subsurface depths, IPU half-lives were larger than 100 d, IPU was the main compound after 92 d of incubation and the main metabolite was an unidentified polar metabolite. These results suggest a metabolic pathway involving hydroxylations for subsurface materials. IPU degradation was largely affected by water availability in both surface and subsurface horizons. Clay content seemed to play a major role in degradation processes in subsurface soil by determining through sorption IPU availability in soil solution and/or by limiting water availability for microorganisms.     

Development and Integration of Quantitative Real-Time PCR Methods for Detection of Mitochondrial DNA and Methanobrevibacter smithii nifH Gene as Novel Microbial Source Tracking Tools

A novel microbial source tracking (MST) method based on the detection of human and non-human markers was developed and applied to track the origin of fecal pollution in water systems. Mitochondrial DNA sequences were used to develop new quantitative real-time polymerase chain reaction (qPCR) assays for dog, poultry, and gull. The targets were included as part of a toolbox including human, cow, pig, and sheep assays. A primer and probe set for the detection of the human-specific nifH gene of Methanobrevibacter smithii was also designed as an indicator of human fecal contamination. The assays were tested for specificity and applied to fecal-spiked surface waters and environmental samples collected from two river catchments impacted by sources of human and non-human fecal contamination. The MST methods described were applicable to both spiked waters and environmental samples, and using the two approaches the origin of fecal pollution could be successfully determined in mixed source fecally polluted waters.     

The fate of the recombinant DNA in corn during composting

In order to make regulations that safeguard food and the environment, an understanding of the fate oftransgenes from genetically modified (GM) plants is of crucial importance. A compost experiment including mature transgenic corn plants and seeds of event Bt 176 (Zea mays L.) was conducted to trace the fate of the transgene cryIA(b) during the period of composting. In bin 1, shredded corn plants including seeds were composted above a layer of cow manure and samples from the corn layer were collected at intervals during a 12-month period. The samples were tested for the transgene persistence and microbial counts and also the compost was monitored for temperature. In bin 2, piles of corn seeds, surrounded by sheep manure and straw, were composted for 12 months. A method combining nested polymerase chain reaction (PCR) and southern hybridization was developed for detection of the transgene in compost. The detection sensitivity was 200 copies of the transgene per gram of dry composted corn material. Composting commenced on day 0, and the transgene was detected in specimens from bin 1 on days 0 and 7 but not on day 14 or thereafter. The transgene in corn seeds was not detectable after 12 months of composting in bin 2. Temperatures in both bins rose to about 50 degrees C within 2 weeks and remained above that temperature for about 3 months, even when the ambient temperature dropped below -20 degrees C. Extracts from compost were inoculated onto culture plates and then were incubated at 23 to 55 degrees C. Within the first 2 weeks of composting in bin 1, the counts of bacteria incubated at 55 degrees C increased from 3.5 to 7.5 log10, whereas those incubated at 23 degrees C remained at about 7.5 log10. The counts of fungi incubated at 45 degrees C increased slightly from 2.5 to 3.1 log10, but those incubated at 23 degrees C decreased from 6.3 to 3.0 log10. The rapid degradation of the transgene during composting of Bt corn plants suggested that the composting process could be used for safe disposal of transgenic plant wastes.