Bankfull Regional Curves for the Alleghany Plateau/Valley and Ridge,Piedmont, and Coastal Plain Regions of Maryland

Regional curves are empirical relationships that can help identify the bankfull stage in ungaged watersheds and aid in designing the riffle dimension in stream restoration projects. Bankfull regional curves were developed from gage stations with drainage areas less than 102 mi² (264.2 km²) for the Alleghany Plateau/Valley and Ridge (AP/VR), Piedmont, and Coastal Plain regions of Maryland. The AP/VR regions were combined into one region for this project. These curves relate bankfull discharge, cross‐sectional area, width, and mean depth to drainage area within the same hydro‐physiographic region (region with similar rainfall/runoff relationship). The bankfull discharge curve for the Coastal Plain region was further subdivided into the Western Coastal Plain (WCP) and Eastern Coastal Plain (ECP) region due to differences in topography and runoff. Results show that the Maryland Piedmont yields the highest bankfull discharge rate per unit drainage area, followed by the AP/VR, WCP, and ECP. Likewise, the Coastal Plain and AP/VR streams have less bankfull cross‐sectional area per unit drainage area than the Piedmont. The average bankfull discharge return interval across the three hydro‐physiographic regions was 1.4 years. The Maryland regional curves were compared to other curves in the eastern United States. The average bankfull discharge return interval for the other studies ranged from 1.1 to 1.8 years.     

Bankfull Regional Curves for North and Northwest Florida Streams1

Abstract: Regional curves, which relate bankfull channel dimensions and discharge to watershed drainage area, are developed to aid in identifying the bankfull stage in ungaged watersheds, and estimating the bankfull discharge and dimensions for river studies and natural channel design applications. This study assessed 26 stable stream reaches in two hydro‐physiographic regions of the Florida Coastal Plain: the Northwest Florida Coastal Plain (NWFCP) and the North Florida Coastal Plain (NFCP). Data from stream reaches in Georgia and Alabama were also used to develop the Florida regional curves, since they are located in the same hydro‐physiographic region. Reaches were selected based on the presence of U.S. Geological Survey gage stations and indicators of limited watershed development (e.g., <10% impervious surface). Analyses were conducted to determine bankfull channel dimensions, bankfull discharge, average channel slope, and Rosgen stream classification. Based on these data, significant relationships were found between bankfull cross‐sectional area, width, mean depth, and discharge as a function of drainage area for both regions. Data from this study suggested that bankfull discharges and channel dimensions were larger from NWFCP streams than from Coastal Plain streams in North Carolina and Maryland. Bankfull discharges were similar between NFCP and Georgia coastal plain streams; therefore, the data were combined into one regional curve. In addition, the data were stratified by Rosgen stream type. This stratification strengthened the relationships of bankfull width and mean depth as a function of drainage area.     

Development and Evaluation of Bankfull Hydraulic Geometry Relationships for the Physiographic Regions of the United States

Bankfull hydraulic geometry relationships are used to estimate channel dimensions for streamflow simulation models, which require channel geometry data as input parameters. Often, one nationwide curve is used across the entire United States (U.S.) (e.g., in Soil and Water Assessment Tool), even though studies have shown that the use of regional curves can improve the reliability of predictions considerably. In this study, regional regression equations predicting bankfull width, depth, and cross‐sectional area as a function of drainage area are developed for the Physiographic Divisions and Provinces of the U.S. and compared to a nationwide equation. Results show that the regional curves at division level are more reliable than the nationwide curve. Reliability of the curves depends largely on the number of observations per region and how well the sample represents the population. Regional regression equations at province level yield even better results than the division‐level models, but because of small sample sizes, the development of meaningful regression models is not possible in some provinces. Results also show that drainage area is a less reliable predictor of bankfull channel dimensions than bankfull discharge. It is likely that the regional curves can be improved using multiple regression models to incorporate additional explanatory variables.     

Bankfull Regional Curves for the Inner and Outer Bluegrass Regions of Kentucky1

Brockman, Ruth R., Carmen T. Agouridis, Stephen R. Workman, Lindell E. Ormsbee, and Alex W. Fogle, 2012. Bankfull Regional Curves for the Inner and Outer Bluegrass Regions of Kentucky. Journal of the American Water Resources Association (JAWRA) 48(2): 391‐406. DOI: 10.1111/j.1752‐1688.2011.00621.x Abstract: Bankfull regional curves that relate channel dimensions and discharge to watershed drainage area are useful tools for assisting in the correct identification of bankfull elevation and in stream restoration and reconstruction. This study assessed 28 stable streams located in two physiographic regions of Kentucky: the Inner Bluegrass and the Outer Bluegrass. Bankfull channel dimensions, discharge, and return period as well as average channel slope, median bed material size, sinuosity, Rosgen stream classification, and percent impervious area were determined. Significant relationships were found between drainage area and the bankfull characteristics of cross‐sectional area, width, mean depth, and discharge for both the Inner Bluegrass and Outer Bluegrass regions (α = 0.05). It was also found that the percent impervious area in a watershed had minimal effect on bankfull dimensions, which is attributed to the well‐vegetated nature of the streambanks, cohesive streambank materials, and bedrock control. No significant differences between any of the Inner Bluegrass and Outer Bluegrass regional curves were found (α = 0.05). Comparisons were made between the Inner Bluegrass and Outer Bluegrass curves and others developed in karst‐influenced areas in the Eastern United States. Although few significant differences were found between the regional curves for bankfull discharge and width, a number of the curves differed with regards to bankfull cross‐sectional area and mean depth.     

Development and Comparison of Multiple Regression Models to Predict Bankfull Channel Dimensions for Use in Hydrologic Models

Channel dimensions are important input variables for many hydrologic models. As measurements of channel geometry are not available in most watersheds, they are often predicted using bankfull hydraulic geometry relationships. This study aims at improving existing equations that relate bankfull width, depth, and cross‐sectional area to drainage area (DA) without limiting their use to well‐gauged watersheds. We included seven additional variables in the equations that can be derived from data that are generally required by hydrologic models anyway and conducted several multiple regression analyses to identify the ideal combination of additional variables for nationwide and regional models for each Physiographic Division of the United States (U.S.). Results indicate that including the additional variables in the regression equations generally improves predictions considerably. The selection of relevant variables varies by Physiographic Division, but average annual precipitation (PCP) and temperature (TMP) were generally found to improve the models the most. Therefore, we recommend using regression equations with three independent variables (DA, PCP, and TMP) to predict bankfull channel dimensions for hydrologic models. Furthermore, we recommend using the regional equations for watersheds within regions from which data were used for model development, whereas in all other parts of the U.S. and the rest of the world, the nationwide equations should be given preference.     

Optimizing Bankfull Discharge and Hydraulic Geometry Relations for Streams in New York State1

Mulvihill, Christiane I. and Barry P. Baldigo, 2012. Optimizing Bankfull Discharge and Hydraulic Geometry Relations for Streams in New York State. Journal of the American Water Resources Association (JAWRA) 48(3): 449-463. DOI: 10.1111/j.1752-1688.2011.00623.x Abstract: This study analyzes how various data stratification schemes can be used to optimize the accuracy and utility of regional hydraulic geometry (HG) models of bankfull discharge, width, depth, and cross-sectional area for streams in New York. Topographic surveys and discharge records from 281 cross sections at 82 gaging stations with drainage areas of 0.52-396 square miles were used to create log-log regressions of region-based relations between bankfull HG metrics and drainage area. The success with which regional models distinguished unique bankfull discharge and HG patterns was assessed by comparing each regional model to those for all other regions and a pooled statewide model. Gages were also stratified (grouped) by mean annual runoff (MAR), Rosgen stream type, and water-surface slope to test if these models were better predictors of HG to drainage area relations. Bankfull discharge models for Regions 4 and 7 were outside the 95% confidence interval bands of the statewide model, and bankfull width, depth, and cross-sectional area models for Region 3 differed significantly (p < 0.05) from those of other regions. This study found that statewide relations between drainage area and HG were strongest when data were stratified by hydrologic region, but that co-variable models could yield more accurate HG estimates in some local regional curve applications.     

BANKFULL DISCHARGE RECURRENCE INTERVALS AND REGIONAL HYDRAULIC GEOMETRY RELATIONSHIPS: PATTERNS IN THE PACIFIC NORTHWEST,USA1

ABSTRACT: The model bankfull discharge recurrence interval (annual series) (T_a) in streams has been approximated at a 1.5‐year flow event. This study tests the linkage between regional factors (climate, physiography, and ecoregion) and the frequency of bank‐full discharge events in the Pacific Northwest (PNW). Patterns of Ta were found to be significant when stratified by EPA Ecoregion. The mean value for T_a in the PNW is 1.4 years; however, when the data is stratified by ecoregion, the humid areas of western Oregon and Washington have a mean value of 1.2 years, while the dryer areas of Idaho and eastern Oregon and Washington have a mean value of 1.4 to 1.5 years. Among the four factors evaluated, vegetation association and average annual precipitation are the primary factors related to channel form and T_a. Based on the results of the T_a analyses, regional hydraulic geometry relationships of streams were developed for the PNW, which relate variables, such as bank‐full cross‐sectional area, width, depth, and velocity, to bankfull discharge and drainage area. The verification of T_a values, combined with the development of regional hydraulic geometry relationships, provides geographically relevant information that will result in more accurate estimates of hydraulic geometry variables in the PNW.     

HYDRAULIC GEOMETRY RELATIONSHIPS FOR URBAN STREAMS THROUGHOUT THE PIEDMONT OF NORTH CAROLINA1

ABSTRACT: Hydraulic geometry relationships, or regional curves, relate bankfull stream channel dimensions to watershed drainage area. Hydraulic geometry relationships for streams throughout North Carolina vary with hydrology, soils, and extent of development within a watershed. An urban curve that is the focus of this study shows the bankfull features of streams in urban and suburban watersheds throughout the North Carolina Piedmont. Seventeen streams were surveyed in watersheds that had greater than 10 percent impervious cover. The watersheds had been developed long enough for the streams to redevelop bankfull features, and they had no major impoundments. The drainage areas for the streams ranged from 0.4 to 110.3 square kilometers. Cross‐sectional and longitudinal surveys were conducted to determine the channel dimension, pattern, and profile of each stream and power functions were fitted to the data. Comparisons were made with regional curves developed previously for the rural Piedmont, and enlargement ratios were produced. These enlargement ratios indicated a substantial increase in the hydraulic geometry for the urban streams in comparison to the rural streams. A comparison of flood frequency indicates a slight decrease in the bankfull discharge return interval for the gaged urban streams as compared to the gaged rural streams. The study data were collected by North Carolina State University (NCSU), the University of North Carolina at Charlotte (UNC), and Charlotte Storm Water Services. Urban regional curves are useful tools for applying natural channel design in developed watersheds. They do not, however, replace the need for field calibration and verification of bankfull stream channel dimensions.     

AVERAGE DISCHARGE,PERENNIAL FLOW INITIATION,AND CHANNEL INITIATION ‐ SMALL SOUTHERN APPALACHIAN BASINS1

ABSTRACT: Regional average evapotranspiration estimates developed by water balance techniques are frequently used to estimate average discharge in ungaged streams. However, the lower stream size range for the validity of these techniques has not been explored. Flow records were collected and evaluated for 16 small streams in the Southern Appalachians to test whether the relationship between average discharge and drainage area in streams draining less than 200 acres was consistent with that of larger basins in the size range (> 10 square miles) typically gaged by the U.S. Geological Survey (USGS). This study was designed to evaluate predictors of average discharge in small ungaged streams for regulatory purposes, since many stream regulations, as well as recommendations for best management practices, are based on measures of stream size, including average discharge. The average discharge/drainage area relationship determined from gages on large streams held true down to the perennial flow initiation point. For the southern Appalachians, basin size corresponding to perennial flow is approximately 19 acres, ranging from 11 to 32 acres. There was a strong linear relationship (R²= 0.85) between average discharge and drainage area for all streams draining between 16 and 200 acres, and the average discharge for these streams was consistent with that predicted by the USGS Unit Area Runoff Map for Georgia. Drainage area was deemed an accurate predictor of average discharge, even in very small streams. Channel morphological features, such as active channel width, cross‐sectional area, and bankfull flow predicted from Manning's equation, were not accurate predictors of average discharge. Monthly baseflow statistics also were poor predictors of average discharge.     

BANKFULL HYDRAULIC GEOMETRY RELATIONSHIPS AND RECURRENCE INTERVALS FOR NORTH CAROLINA'S COASTAL PLAIN1

ABSTRACT: Bank full hydraulic geometry relationships relate stream channel geometry to watershed size for specific physiographic regions. This paper presents bank full hydraulic geometry relationships and recurrence intervals for the Southeastern Plain coercion and the flat woods subtype of the Middle Atlantic Coastal Plain ecoregion found within North Carolina's Coastal Plain physiographic province. Cross‐sectional and longitudinal survey data from gated and unpaged streams were used to compute channel dimension and profile information. Power functions were developed, relating drainage area to bank full discharge, cross‐sectional area, width, and mean depth. Recurrence intervals of bank full events were estimated from gagged streams using both a Log‐Pearson Type III distribution of peak annual discharge and a partial‐duration series of average daily discharge. Results from both methods indicate that average bank full recurrence intervals for the study area are below one year. Determinations of recurrence intervals by the Log‐Pearson Type III distribution were for the most part inconclusive (less than one year), while a partial duration series estimated a 0.19 year average, ranging from 0.11 to 0.31 years.     

Testing the Hydrological Landscape Unit Classification System and Other Terrain Analysis Measures for Predicting Low-Flow Nitrate and Chloride in Watersheds

Elevated nitrate concentrations in streamwater are a major environmental management problem. While land use exerts a large control on stream nitrate, hydrology often plays an equally important role. To date, predictions of low-flow nitrate in ungauged watersheds have been poor because of the difficulty in describing the uniqueness of watershed hydrology over large areas. Clearly, hydrologic response varies depending on the states and stocks of water, flow pathways, and residence times. How to capture the dominant hydrological controls that combine with land use to define streamwater nitrate concentration is a major research challenge. This paper tests the new Hydrologic Landscape Regions (HLRs) watershed classification scheme of Wolock and others (Environmental Management 34:S71-S88, 2004) to address the question: Can HLRs be used as a way to predict low-flow nitrate? We also test a number of other indexes including inverse-distance weighting of land use and the well-known topographic index (TI) to address the question: How do other terrain and land use measures compare to HLR in terms of their ability to predict low-flow nitrate concentration? We test this for 76 watersheds in western Oregon using the U.S. Environmental Protection Agency’s Environmental Monitoring and Assessment Program and Regional Environmental Monitoring and Assessment Program data. We found that HLRs did not significantly improve nitrate predictions beyond the standard TI and land-use metrics. Using TI and inverse-distance weighting did not improve nitrate predictions; the best models were the percentage land use—elevation models. We did, however, see an improvement of chloride predictions using HLRs, TI, and inverse-distance weighting; adding HLRs and TI significantly improved model predictions and the best models used inverse-distance weighting and elevation. One interesting result of this study is elevation consistently predicted nitrate better than TI or the hydrologic classification scheme.     

A Power Law Model for River Flow Velocity in Iowa Basins

This study explores power law relationships to estimate water flow velocity as a function of discharge and drainage area across river networks. We test the model using empirical data from 214 United States (U.S.) Geological Survey gauging stations distributed over the state of Iowa in the U.S. The empirical data are the measurements of the mean cross‐sectional velocity and concurrent discharge. The data are used to estimate parameters for a state‐wide model and to test for spatial variability for 15 large river basins contained within the state. Spatial differences among the basins are small but some parameters significantly differ from the state‐wide model. Using individual station data, the authors also explore a simpler power law model that disregards dependence on the drainage area. Overall, the study shows that including drainage area improves the model. Our study provides parameter values that can be directly incorporated into a regional scale routing model, and provides a framework for developing flow velocity models for hydraulically similar rivers in the U.S. and the world.     

ESTIMATING STREAMFLOW AND ASSOCIATED HYDRAULIC GEOMETRY,THE MID‐ATLANTIC REGION,USA1

ABSTRACT: Methods to estimate streamflow and channel hydraulic geometry were developed for unpaged streams in the Mid‐Atlantic Region. Observed mean annual streamflow and associated hydraulic geometry data from 75 gaging stations in the Appalachian Plateau, the Ridge and Valley, and the Piedmont Physiographic Provinces of the Mid‐Atlantic Region were used to develop a set of power functions that relate streamflow to drainage area and hydraulic geometry to streamflow. For all three physiographic provinces, drainage area explained 95 to 98 percent of the variance in mean annual streamflow. Relationships between mean annual streamflow and water surface width and mean flow depth had coefficients of determination that ranged from R²= 0.55 to R²= 0.91, but the coefficient of determination between mean flow velocity and mean annual streamflow was lower (R²= 0.44 to R²= 0.54). The advantages of using the regional regression models to estimate streamflow over a conceptual model or a water balance model are its ease of application and reduced input data needs. The prediction of the regression equations were tested with data collected as part of the U.S. Environmental Protection Agency (USEPA) Environmental Monitoring and Assessment Program (EMAP). In addition, equations to transfer streamflow from gaged to ungaged streams are presented.     

Stationarity of Streamflow Records and Their Influence on Bankfull Regional Curves1

Haucke, Jessica and Katherine A. Clancy, 2011. Stationarity of Streamflow Records and Their Influence on Bankfull Regional Curves. Journal of the American Water Resources Association (JAWRA) 47(6):1338–1347. DOI: 10.1111/j.1752‐1688.2011.00590.x Abstract: Bankfull regional curves, which are curves that establish relationships among channel morphology, discharge, drainage area, are used extensively for stream restoration. These curves are developed upon the assumption that streamflows maintain stationarity over the entire record. We examined this assumption in the Driftless Area of southwestern Wisconsin where agricultural soil retention practices have changed, and precipitation has increased since the 1970s. We developed a bankfull regional curve for this area using field surveys of bankfull channel performed during 2008‐2009 and annual series of peak streamflows for 10 rivers with streamflow records ranging from the 1930s to 2009. We found bankfull flows to correlate to a 1.1 return period. To evaluate gage data statistics, we used the sign test to compare our channel morphology to historic 1.5 return period discharge (Q_1.5) for five time periods: 1959‐1972, 1973‐1992, 1993‐2008, 1999‐2008, and the 1959‐2008 period of record. Analysis of the historic gage data indicated that there has been a more than 30% decline in Q_1.5 since 1959. Our research suggests that land conservation practices may have a larger impact on gaging station stationarity than annual precipitation changes do. Additionally, historic peak flow data from gages, which have records that span land conservation changes, may need to be truncated to represent current flow regimes.     

Stage‐Discharge Relationships for U‐, A‐, and W‐Weirs in Un‐submerged Flow Conditions1

Thornton, Christopher I., Anthony M. Meneghetti, Kent Collins, Steven R. Abt, and S. Michael Scurlock, 2011. Stage‐Discharge Relationships for U‐, A‐, and W‐Weirs in Un‐submerged Flow Conditions. Journal of the American Water Resources Association (JAWRA) 47(1):169‐178. DOI: 10.1111/j.1752‐1688.2010.00501.x Abstract: Instream rock weirs are routinely placed into stream systems to provide grade control, reduce streambank erosion, provide energy dissipation, and allow fish passage. However, design and performance criteria for site specific applications are often anecdotal or qualitative in nature, and based upon the experience of the design team. A study was conducted to develop generic state‐discharge relationships for U‐, A‐, and W‐weirs. A laboratory testing program was performed in which scaled, near‐prototype U‐, A‐, and W‐rock weir structures were constructed in 11 configurations. Each configuration encompassed a unique weir shape, bed material, and/or bed slope. Thirty‐one tests were conducted in which each structure was subjected to a sequence of predetermined discharges that minimally included the equivalent of 1/3 bankfull, 2/3 bankfull, and bankfull conditions. All tests were performed in subcritical, un‐submerged flow conditions. Stage‐discharge relationships were developed using multivariant, power regression techniques for each of the U‐, A‐, and W‐rock weirs as a function of the effective weir length, flow depth, mean weir height, rock size, and discharge coefficient. Unique coefficient expressions were developed for each weir shape, and a single discharge coefficient was proposed applicable to the weirs for determining the channel stage‐discharge rating.     

VARIABILITY OF BOTTOM SEDIMENT CHARACTERISTICS OF THE CONTINENTAL UNITED STATES1

ABSTRACT: Sediment characteristics of samples from physiographic provinces of the continental United States were examined to determine variability within and among physiographic provinces and to compare characteristics of freshwater and saltwater sediments. Organic carbon, particle size distribution, particle surface area, cation exchange capacity, redox potential, and percent solids were examined for a variety of lotic and lentic freshwater sediment samples and nearshore estuarine and marine samples from the continental United States. Analysis of variance indicated significant differences (p < 0.05) within and among physiographic provinces for both freshwater and saltwater sediment samples. Sediment characteristics within physiographic provinces were as variable as characteristics among provinces. Freshwater sediment characteristics were not significantly different (p < 0.05) from saltwater sediment characteristics. Saltwater sediment characteristics were observed to be more strongly correlated with each other than were freshwater sediment characteristics. Based on the variability of sediment samples examined in this study, a specific site may require 50 or more replicate samples to be adequately or accurately represented.     

Morphology Characteristics of Southern Appalachian Wilderness Streams1

Zink, Jason M., Gregory D. Jennings, and G. Alexander Price, 2012. Morphology Characteristics of Southern Appalachian Wilderness Streams. Journal of the American Water Resources Association (JAWRA) 48(4): 762‐773. DOI: 10.1111/j.1752‐1688.2012.00647.x Abstract: Watersheds without urbanization or impacts from logging are rare in the southern Appalachian Mountains. The Joyce Kilmer/Slickrock Wilderness of North Carolina and Tennessee contains 24 km² of old‐growth forest, with the balance of the wilderness in a mature second‐growth forest. The watersheds of Little Santeetlah and Slickrock Creek are located within the wilderness. Morphological information, including channel dimensions and longitudinal profiles, was gathered from 14 alluvial stream reaches in these watersheds. The study sites had drainage areas from 0.25 to 41.6 km² and stream slopes from 0.014 to 0.104 m/m. Bankfull cross‐section dimensions of the study stream reaches were strongly correlated to drainage area across the observed range of slopes and bed morphology. Cross‐section area and width relationships for the streams in this study did not differ significantly from regional curves for the mountain physiographic region of North Carolina. Observations of these reaches did not suggest a definitive rule regarding the proportion of steps and riffles in streams. Pools occupied greater than 50% of the length in all stream reaches with slopes less than 0.07 m/m. Significant correlation existed between step height ratio and slope, suggesting that step height can be approximated as the product of channel width and slope. Riffle length and riffle slope ratios were also significantly correlated with slope, though pool spacing was not.     

Estimating the Frequency and Extent of Overbank Flow of a Baseflow‐Dominated Stream Flowing through a Wetland

River floodplains provide critical habitat for a wide range of animal and plant species and reduce phosphorus and nitrogen loads in streams. It has been observed that baseflow‐dominated streams flowing through wetlands are commonly at or near bankfull and overflow their banks much more frequently than other streams. However, there is very little published quantitative support for this observation. The study focuses on a 1‐km reach of Black Earth Creek, a stream in the Midwestern United States (U.S.). We used one‐dimensional hydraulic modeling to estimate bankfull discharge at evenly spaced stream cross sections, and two‐dimensional modeling to quantitate the extent of wetland inundation as a function of discharge. We then used historical streamflow data from two U.S. Geological Survey gaging stations to quantitate the frequency of wetland inundation. For the with‐sediment case, the frequency of overbank conditions at the 38 cross sections in the wetland ranged from 3 to 85 days per year and averaged 43 days per year. Ten percent of the wetland was inundated for an average of 35 days per year. For the without‐sediment case, the frequency of overbank conditions ranged from 2.6 to 48 days per year and averaged 14 days per year. Also, 10% of the wetland was inundated for an average of 25 days per year. These unusually high rates of floodplain inundation are likely due in part to the very low stream gradient and shallow depths of overbank flow.     

UNCERTAINTY IN ESTIMATING BANKFULL CONDITIONS1

ABSTRACT: Bankfull depth and discharge are basic input parameters to stream planform, stream restoration, and highway crossing designs, as well as to the development of hydraulic geometry relationships and the classification of streams. Unfortunately, there are a wide variety of definitions for bankfull that provide a range of values, and the actual selection of bankfull is subjective. In this paper, the relative uncertainty in determining the bankfull depth and discharge is quantified, first by examining the variability in the estimates of bankfull and second by using fuzzy numbers to describe bankfull depth. Fuzzy numbers are used to incorporate uncertainty due to vagueness in the definition of bankfull and subjectivity in the selection of bankfull. Examples are provided that demonstrate the use of a fuzzy bankfull depth in sediment trans. port and in stream classification. Using fuzzy numbers to describe bankfull depth rather than a deterministic value allows the engineer to base designs and decisions on a range of possible values and associated degrees of belief that the bankfull depths take on each value in that range.     

Hydrologic and Morphologic Variability of Streams With Different Cranberry Agriculture Histories,Southern New Jersey,United States1

Procopio, Nicholas A., 2010. Hydrologic and Morphologic Variability of Streams With Different Cranberry Agriculture Histories, Southern New Jersey, United States. Journal of the American Water Resources Association (JAWRA) 46(3):527-540. DOI: 10.1111/j.1752-1688.2010.00432.x Abstract: The creation of reservoirs and the modification of stream channels are common practices used to facilitate the efficient production of cranberries. The potential impacts to hydrologic and geomorphic aspects of streamflow and channel structure have not been adequately assessed. In this study, the streamflow regime of 12 streams and the channel morphologies of 11 streams were compared for study sites in the Pinelands region of New Jersey with upstream active-cranberry bogs, upstream abandoned-cranberry bogs, and basins with no apparent agricultural history. Flow regime metrics included measures of low-flow, median-flow, and bankfull discharge, two measures of streamflow variability (spread and a modified Richards-Baker Flashiness index), and the frequency of overbank flooding. Stream-channel morphology metrics included average bank slope, average bankfull width, average bankfull depth, average bankfull width-to-depth ratio, and average bankfull area. No significant differences between stream types were apparent for any of the metrics. Basin-area normalized streamflow values of all 12 study sites were highly correlated to each other. Significant relationships existed between some of the flow-regime and channel-morphology metrics. Due to the lack of significant differences between stream types, it appears that neither historic nor current cranberry agricultural practices considerably influence flow regimes or the channel morphology of streams in the New Jersey Pinelands.