EFFECTS OF IRRIGATION ON WATER QUALITY OF A SHALLOW UNCONFINED AQUIFER1

ABSTRACT: The ground water quality of a shallow unconfined aquifer was monitored before and after implementation of a border strip irrigation scheme, by taking monthly samples from an array of 13 shallow wells. Two 30 m deep wells were sampled to obtain vertical concentration profiles. Marked vertical, temporal, and spatial variabilities were recorded. The monthly data were analyzed for step and linear trends using nonparametric tests that were adjusted for the effects of serial correlation. Average nitrate concentrations increased in the preirrigation period and decreased after irrigation began. This was attributed to wetter years in 1978–1979 than in 1976–1977 which increased leaching, and to disturbance of the topsoil during land contouring before irrigation, followed by excessive drainage after irrigation. Few significant trends were recorded for other determinants, possibly because of shorter data records. Nitrate, sulphate, and potassium concentrations decreased with depth, whereas sodium, calcium, bicarbonate, and chloride concentrations increased. These trends allowed an estimation to be made of the depth of ground water affected by percolating drainage. This depth increased during the irrigation season and after periods of winter recharge. Furthermore, an overall increase in the depth of drainage-affected ground water occurred with time, which paralleled the development of the irrigation scheme.     

ENHANCEMENTS OF NONPOINT SOURCE MONITORING OF VOLATILE ORGANIC COMPOUNDS IN GROUND WATER1

ABSTRACT: The U.S. Geological Survey (USGS) has compiled a national retrospective data set of analyses of volatile organic compounds (VOCs) in ground water of the United States. The data are from Federal, State, and local nonpoint‐source monitoring programs, collected between 1985–95. This data set is being used to augment data collected by the USGS National Water‐Quality Assessment (NAWQA) Program to ascertain the occurrence of VOCs in ground water nationwide. Eleven attributes of the retrospective data set were evaluated to determine the suitability of the data to augment NAWQA data in answering occurrence questions of varying complexity. These 11 attributes are the VOC analyte list and the associated reporting levels for each VOC, well type, well‐casing material, type of openings in the interval (screened interval or open hole), well depth, depth to the top and bottom of the open interval(s), depth to water level in the well, aquifer type (confined or unconfined), and aquifer lithology. VOCs frequently analyzed included solvents, industrial reagents, and refrigerants, but other VOCs of current interest were not frequently analyzed. About 70 percent of the sampled wells have the type of well documented in the data set, and about 74 percent have well depth documented. However, the data set generally lacks documentation of other characteristics, such as well‐casing material, information about the screened or open interval(s), depth to water level in the well, and aquifer type and lithology. For example, only about 20 percent of the wells include information on depth to water level in the well and only about 14 percent of the wells include information about aquifer type. The three most important enhancements to VOC data collected in nonpoint‐source monitoring programs for use in a national assessment of VOC occurrence in ground water would be an expanded VOC analyte list, recording the reporting level for each analyte for every analysis, and recording key ancillary information about each well. These enhancements would greatly increase the usefulness of VOC data in addressing complex occurrence questions, such as those that seek to explain the reasons for VOC occurrence and nonoccurrence in ground water of the United States.     

RESULTS OF ACIDIZING WATER WELLS IN ARIZONA1

Two wellfields have been developed to provide water for a coal fired electric generating station in Arizona. Wellfield No. 1 penetrates the unconfined Coconino Sandstone aquifer, and wellfield No. 2 penetrates the composite Kaibab Limestone-Coconino Sandstone aquifer where ground water occurs under confined conditions. A well in each wellfield was pumped and water level drawdown data were collected before and after acidizing. The drawdown data at the various pumping rates were analyzed to determine the potential benefits of acidizing production water wells in both wellfields. After acidizing, the specific capacity of the well in wellfield No. 1 was improved about 50 percent at water production rates ranging from about 200 to 500 gallons per minute (gpm) (13 to 32 liters per second (lps)). After acidizing, the specific capacity of the well completed in wellfield No. 2 was improved about 100 percent at pumping rates ranging from about 1,250 to 2,200 gpm (79 to 139 lps). An annual saving of approximately 11 percent in pumping costs can be realized in wellfield No. 2, and savings are approximately four percent in wellfield No. 1. Acidization is beneficial for wells that can produce more than 500 gpm (32 lps), and is of marginal value for those that produce less than that amount.     

ANOMALOUS NATURAL SULFATE IN WATER WELLS OF THE GREENBRIER GROUP,WEST VIRGINIA1

ABSTRACT: Many water wells developed in the Middle Mississippian Greenbrier Group of central Greenbrier County, West Virginia, are very productive because of the abundant solution conduits in this karst aquifer. Water from these wells, all of which (with one exception) are clustered in a small area about eight kilometers northwest of Lewisburg, West Virginia, is typically very hard (calcium-magnesium-bicarbonate type). Of 74 wells sampled, eight showed sulfate concentrations ranging from 600 to 1700 mg/l. These wells also showed a much higher than average concentration of calcium, magnesium, chloride, sodium, and, in a few cases, iron. The water from several of these wells was not potable. Previously unpublished work has suggested that dolomite and gypsum dissolution have contributed magnesium and sulfate ions to the ground water. It is also likely that, where sodium, chloride, and iron concentrations are above background, halite dissolution and pyrite oxidation are contributing to the problem. All of these minerals are often associated with the basal waterbearing strata of the Greenbrier Group. In addition, it is possible that the wells are receiving deeply circulating ground waters, via fracture zones, which feed many other well-known sulfur and/or thermal springs in the central Appalachians.     

HYDROGEOLOGY AND PATHS OF FLOW IN THE CARBONATE BEDROCK AQUIFER,NORTHWESTERN INDIANA1

ABSTRACT: The U.S. Geological Survey (USGS) is assessing the ground-water resources of the carbonate bedrock aquifers in Indiana and Ohio as part of their Regional Aquifer Systems Analysis program. Part of this assessment includes the determination of unknown aspects of the hydraulic characteristics, boundaries, and flow paths of the carbonate aquifer. To accomplish this, the USGS drilled three wells through the carbonate aquifer near the Kankakee River in northwestern Indiana. Geophysical logs were used to help determine depths and thicknesses for testing and to help describe geology at the three wells. Packer tests were used to determine direction of ground-water flow and to provide data for an analysis of the distribution of transmissivity in the carbonate aquifer. Transmissivity of the carbonates is associated with two physical characteristics of the rocks: fractures and interconnected porosity. Almost all of the transmissivity is derived from horizontal fracturing; however, only a few of the fractures present in the carbonate are transmissive. Some transmissivity is associated with a zone of fossiliferous, vuggy dolomite, which yields water from the rock matrix. Most of the transmissivity is associated with large fractures and solution crevices in the upper 30 feet of the bedrock; less transmissivity is associated with the deeper vuggy reef material, even where extensively fractured. Transmissivity of individual fractures and fossiliferous zones ranges from 300 to 27,000 feet squared per day. The aquifer bottom is defined by a lack of transmissive fractures and an increased shale content near the contact of the Silurian and Ordovician sections. Water-level data from the three wells indicate that flow is horizontal at well site 1 north of the Kankakee River, upward at well site 2 near the river, and downward at well site 3 south of the river. Most of the flow occurs in the upper part of the carbonate bedrock where fracturing and solution-enlarged crevices are most developed. Water levels indicate the the Kankakee River is a hydrologic boundary for the regional carbonate bedrock aquifer.     

IMPACT OF IRRIGATION WELLS ON BASEFLOW OF THE BIG BLUE RWER,NEBRASKA1

ABSTRACT: The Kansas-Nebraska Big Blue River compact requires that the state of Nebraska insure a minimum flow of the Big Blue River across the state line. There are two options that the state of Nebraska may use to ensure minimum flows. The obvious option is to limit surface-water irrigators along the river. However, under the terms of the compact, a second option may be to regulate irrigation wells that are within one mile of the river and were installed after November 1, 1968. The objective of this study is to quantify the effects of 17 irrigation wells that may be regulated on baseflow of the Big Blue River. A finite-element model is used to study the hydrogeologic system between DeWitt and Beatrice, Nebraska. The 17 wells that may be regulated are located between these towns and are developed in sediments deposited in a cross-cutting paleovalley anchor alluvium associated with the Big Blue River. While there wore considerable existing data, additional data were gathered by drilling an additional nine test holes, conducting several aquifer tests, stream-stage measurements, and baseflow calculation through extensive stream-discharge measurements, establishment of a ground water-level monitoring network, determining the amount of water pumped for irrigation and municipal use in the area, and a short-term precipitation network. The model was calibrated using observed baseflow and ground water level data. The model clearly shows that regulating the 17 wells to maintain baseflow would have a minimal effect on the overall water budget. This is reasonable, especially considering that there are over 250 irrigation wells in the project area. The 17 wells considered pumped only 6 percent of the total pumpage within the modeled area during the irrigation season of 1984. The computer model provides the documentation needed to demonstrate this fact. Although much of the resources spent and a significant amount of hydrogeologic data are being collected over a period of three years on a relatively small area, the simulation model could be improved through further field testing of the aquifer and stream-bed sediment characteristics and quantification of ground water recharge, discharge, and evapotranspiration rates.     

OCCURRENCE OF PESTICIDES IN GROUND WATER OF THE OZARK PLATEAUS PROVINCE1

ABSTRACT: Pesticides were detected in ground-water samples collected from 20 springs and nine wells in the Ozark Plateaus Province of Arkansas, Kansas, Missouri, and Oklahoma. From April through September 1993, water samples were collected from 50 shallow domestic wells and 50 springs in the Springfield Plateau and Ozark aquifers and analyzed for 47 pesticides and metabolites. Pesticides were detected in 17 water samples from the Springfield Plateau aquifer and 12 water samples from the Ozark aquifer. Fourteen pesticides were detected, with a maximum of four pesticides detected in any one sample. The most commonly detected pesticides were atrazine (14 detections), prometon (11 detections), and tebuthiuron (seven detections). P, P' DDE, a metabolite of DDT, was detected in water samples from three wells and one spring. The remaining pesticides were detected in three or less samples. The occurrence and distribution of pesticides probably are related to the local land use near a sampling site. Pesticide detections were significantly related to aquifer, site type, and discharge of springs.     

ASSESSMENT OF HYDRAULIC PROPERTIES IN AN UNCONFINED ALLUVIAL AQUIFER NEAR GRAND ISLAND,NEBRASKA1

ABSTRACT: A method is presented to analyze time-drawdown data from one or more observation wells for the calculation of four hydraulic parameters for unconfined aquifers: vertical hydraulic conductivity, horizontal hydraulic conductivity, storage coefficient, and specific yield. The hydraulic parameter results are further analyzed for reliability and the possible ranges of the actual parameter values. After verification using a theoretical example, the method was used to analyze pumping test data from 22 observation wells in an unconfined alluvial aquifer near Grand Island, Nebraska. Results indicate that this method can be used to efficiently calculate the four hydraulic parameters in this type of aquifer. The method can also identify the impact of measurement errors on the parameter estimates, and provide ranges of the actual parameter values. The parameter values calculated using this method were compared to those determined using other theories. It is found that this method is very useful for calculating the hydraulic properties from pumping test data and for analyzing the parameter reliability.     

Dynamic Modeling of Ground‐Water Quality Using Bayesian Techniques1

Abstract: Water industry experts have been arguing that the traditional techniques are not an accurate means of measuring water contamination. This is mainly because these techniques emphasize neither the stochastic nature of the water contamination process nor the precision and the accuracy of the tested methods used by environmental laboratories. In this work, we describe the development and application of prototype Dynamic Bayesian Networks (DBNs) that model ground‐water quality to determine the impact of chemical contaminants on ground‐water quality in the Salalah area, which is allocated to the south of Oman. We also present a new technique for data pre‐processing because it is needed for the treatment of ground‐water datasets that are used as the data source to learn the probabilities for dynamic decision models. Among more than 20 wells in area, only four wells were selected to be analyzed and the results show that we achieved an acceptable level of efficiency.     

UTILIZATION OF A GEOGRAPHIC INFORMATION SYSTEM TO IDENTIFY THE PRIMARY AQUIFER PROVIDING GROUND WATER TO INDWIDUAL WELLS IN EASTERN ARKANSAS1

ABSTRACT: A Geographic Information System (GIS) was used to develop an automated procedure for identifying the primary aquifers supplying ground water to individual wells in eastern Arkansas. As mandated by state law, water-use data are reported by ground-water withdrawers annually to the Arkansas Soil and Water Conservation Commission, and stored in the Arkansas Site-Specific Water-Use Data System provided and supported by the U.S. Geological Survey. Although most withdrawers are able to provide the amount of water withdrawn and the depth of their wells, very few are able to provide the name of the aquifer from which they withdraw water. GIS software was used to develop an automated procedure for identifying the primary aquifers supplying ground water to individual wells in eastern Arkansas. The software was used to generate a spatial representation of the bottom boundary for the Mississippi River Valley alluvial aquifer (the shallowest aquifer) in eastern Arkansas from well log-data collected by the U.S. Geological Survey. The software was then used to determine the depth of the aquifer bottom at reported well locations to ascertain whether the Mississippi River Valley alluvial aquifer or a deeper aquifer was the primary aquifer providing water to each well. The alluvial aquifer was identified as the primary aquifer for about 23,500 wells.     

EFFECT OF SEMI‐PERCHED GROUND WATER ON MONITORING OF GROUND WATER LEVELS IN A DEVELOPED AQUIFER1

ABSTRACT: Interpretation of ground water level changes in a developed aquifer usually relies on reference to some benchmark such as “predevelopment” ground water levels, changes from fall to fall and/or spring to spring, or to determination of maximum stress during the pumping season. The assumption is that ground water levels measured in the monitoring well accurately reflect the state of the ground water resource in terms of quantity in storage and the effects of local pumping. This assumption is questionable based on the patterns shown in continuous hydrographs of water levels in monitoring wells in Nebraska, and wells installed to determine vertical gradients. These hydrographs show clear evidence for vertical ground water gradients and recharge from overlying parts of the aquifer system to deeper zones in which production wells are screened. The classical concept of semi‐perched ground water, as described by Meinzer, is demonstrated by these hydrographs. The presence of semi‐perched ground water (Meinzer definition, there is no intervening unsaturated zone) invalidates the use of measured ground water levels in regional observation programs for detailed numerical management of the resource. Failure to recognize the Meinzer effect has led to faulty management. The best use of data from the observation well network would be for detection of trends and education unless it is clearly understood what is being measured.     

NITRATES IN RURAL WELLS OF THE SENEGAL RIVER BASIN1

ABSTRACT: A survey of 34 open hand dug wells was performed in the Senegal River basin of West Africa. Nitrate concentrations were determined on the well water samples over a six-month period. With the exception of two wells, the wells indicated varying levels of nitrate contamination. The range of concentrations was 0.10 to 880 mg/I as nitrate. These data when compared to physical characteristics, land use, and age using a chi-square analysis did not suggest any strong association. The fact that these wells are open and in a semiarid climate may be of such importance that the previously considered factors are of minor relative importance. Contamination may be primarily the result of foreign matter entering the well mouth.     

COMPARISON OF METHODS FOR ESTIMATING FLOOD MAGNITUDES ON SMALL STREAMS IN GEORGIA1

ABSTRACT: The U.S. Geological Survey has collected flood data for small, natural streams at many sites throughout Georgia during the past 20 years. Flood-frequency relations were developed for these data using four methods: (1) observed (log-Pearson Type HI analysis) data, (2) rainfall-runoff model, (3) regional regression equations, and (4) map-model combination. The results of the latter three methods were compared to the analyses of the observed data in order to quantify the differences in the methods and determine if the differences are statistically significant. Comparison of regression-estimates with observed discharges for sites having 20 years (1966 to 1985) and 10 years (1976 to 1985) of record at different sites of annual peak record indicate that the regression-estimates are not significantly different from the observed data. Comparison of rainfall-runoff-model simulated estimates with observed discharges for sites having 10 years and 20 years of annual peak record indicated that the model-simulated estimates are significantly and not significantly different, respectively. The biasedness probably is due to a “loss of variance” in the averaging procedures used within the model and the short length of record as indicated in the 10 and 20 years of record. The comparison of map-model simulated estimates with observed discharges for sites having 20 years of annual-peak runoff indicate that the simulated estimates are not significantly different. Comparison of “improved” map-model simulated estimates with observed discharges for sites having 20 years of annual-peak runoff data indicate that the simulated estimates are different. The average adjustment factor suggested by Lichty and Liscum to calculate the “improved” map-model overestimates in Georgia by an average of 20 percent for three recurrence intervals analyzed.     

CONTRASTING WATER QUALITY FROM PAIRED DOMESTIC/PUBLIC SUPPLY WELLS,CENTRAL HIGH PLAINS1

ABSTRACT: Closely located domestic and public supply wells were sampled using identical sampling procedures to allow comparison of water quality associated with well type. Water samples from 15 pairs of wells with similar screened intervals completed in the central High Plains regional aquifer in parts of Kansas, Oklahoma, and Texas were analyzed for more than 200 water quality constituents. No statistically significant differences were observed between the concentrations of naturally‐derived constituents (major ions, trace elements, and radon) in paired wells. However, differences in water quality between paired wells were observed for selected anthropogenic compounds (pesticides and tritium), in that some public supply wells produced water that was more recently recharged and contained constituents derived from surface activities. The presence of recently recharged water and compounds indicative of anthropogenic activities in some public supply wells was likely due to operational variations (pumping rate and pumping cycles), as demonstrated in a particle tracking simulation. Water containing surface‐derived anthropogenic compounds from near the water table was more quickly drawn to high volume public supply wells (less than five years) than domestic wells (greater than 120 years) with small pumping rates. These findings indicate that water quality samples collected from different well types in the same area are not necessarily directly comparable. Sampling domestic wells provides the best broad‐scale assessment of water quality in this aquifer setting because they are less susceptible to localized contamination from near the water table. However, sampling public supply wells better represents the quality of the used resource because of the population served.     

SPECTRAL ANALYSIS OF TIDAL FLUCTUATIONS IN GROUND WATER LEVEL1

ABSTRACT: Water level data at 16 ground water wells and two sea water gauging stations, coupled with barometric measurements in an alluvial plain in the central‐west region of Taiwan, are analyzed using spectral analysis in the time and frequency domains. The semi‐diurnal component from water level station is observed to be the most noticeable signal while the diurnal component is the less distinct signal recorded at the water level stations. Both semidiurnal and diurnal components are coupled with atmospheric pressure measurements. From the atmospheric pressure data, spectral analysis indicates that both the raw and the pressure adjusted water levels are almost in phase and retain the same amplitude in this area. It implies that the effect of pressure variations is not significant for the sea water and ground water level nearby; the astronomical tidal components, as expected, are the main factor causing fluctuation of ocean water and ground water levels in the Choshuihsi alluvial plain.     

GROUND WATER OF THE ISLAND OF MONTREAL,CANADA1

ABSTRACT: The geochemistry and nature of the flow of ground water not only control the supply potential but constitute clues to the whole geology of an area. A study has been made of the largest available assemblage of data from 161 wells for the Island of Montreal collected by the Geological Survey of Canada in 1951–53. Data indicated that the system is generally subartesian, flowing from the principal topographically high areas towards the shores of the Island. As the probable use is about 13% of the estimated recharge of 140 million liters per day, most wells could be supplied by local recharge. The study has confirmed the predominance of calcium bicarbonate ground water from the carbonate sequence. The waters appeared to be saturated with respect to CaCO₃ in all but 10 wells. The presence of other types of waters suggests the effects of the igneous intrusions of the area, the post-glacial marine submergence and the upward movement of waters from deep sources through fault and other structural zones. Confirmation of the significant variations in chemical composition in some neighboring wells indicated the future need for repetitive sampling from specific horizons for chemical and isotopic analyses.     

THE EFFECT OF RESIDENTIAL DEVELOPMENT ON GROUND‐WATER QUALITY NEAR DETROIT,MICHIGAN1

ABSTRACT: Two water‐quality studies were done on the outskirts of the Detroit metropolitan area to determine how recent residential development has affected ground‐water quality. Pairs of monitor and domestic wells were sampled in areas where residential land use overlies glacial outwash deposits. Young, shallow waters had significantly higher median concentrations of nitrate, chloride, and dissolved solids than older, deeper waters. Analysis of chloride/bromide ratios indicates that elevated salinities are due to human activities rather than natural factors, such as upward migration of brine. Trace concentrations of volatile organic compounds were detected in samples from 97 percent of the monitor wells. Pesticides were detected infrequently even though they are routinely applied to lawns and roadways in the study area. The greatest influence on ground‐water quality appears to be from septic‐system effluent (domestic sewage, household solvents, water‐softener backwash) and infiltration of storm‐water runoff from paved surfaces (road salt, fuel residue). No health‐related drinking‐water standards were exceeded in samples from domestic wells. However, the effects of human activities are apparent in 76 percent of young waters, and at depths far below 25 feet, which is the current minimum well‐depth requirement.     

INCREASING WATER SUPPLY BY MIXING OF FRESH AND SALINE GROUND WATERS1

ABSTRACT: The quality of ground water in any aquifer takes its final form due to natural mixture of waters, which may originate from different sources. Water quality varies from one aquifer to another and even within the same aquifer itself. Different ground water quality is obtained from wells and is mixed in a common reservoir prior to any consumption. This artificial mixing enables an increase in available ground water of a desired quality for agricultural or residential purposes. The question remains as to what proportions of water from different wells should be mixed together to achieve a desired water quality for this artificial mixture. Two sets of laboratory experiments were carried out, namely, the addition of saline water to a fixed volume of fresh water. After each addition, the mixture volume and the electric conductivity value of the artificially mixed water were recorded. The experiments were carried out under the same laboratory temperature of 20°C. A standard curve was developed first experimentally and then confirmed theoretically. This curve is useful in determining either the volume or discharge ratio from two wells to achieve a predetermined electrical conductivity value of the artificial mixture. The application of the curve is given for two wells within the Quaternary deposits in the western part of the Kingdom of Saudi Arabia.     

IDENTIFICATION OF SOLUTE LOADING SOURCES TO A SURFACE STREAM1

ABSTRACT: A study was performed to identify sources of solute loading to the Dirty Devil River and its major tributaries, in southeastern Utah. A primary goal was to determine the contribution of gypsum dissolution to total dissolved solids concentration, and its potential increase in the future if salinity control measures are instituted. Synoptic field data were collected during the low flow period in October 1983. Data were analyzed using the geochemistry models WATEQF and BALANCE to postulate mineral reactions leading to solute loading. Three known sources of solute loading, involving two different geochemical mechanisms, were clearly discernable. Two additional areas of possible gypsum dissolution were located.     

DETERMINATION OF HYDRAULIC C.ONDUCTWITY TENSOR USING A NONLINEAR LEAST SQUARES ESTIMATOR1

ABSTRACT: Reliable and consistent estimation of the components of the hydraulic conductivity tensor provides information needed to make proper decisions regarding clean up and restoration of contaminated aquifers. In this study, the nonlinear least-squares estimation technique was applied to drawdown versus time data from three or more observation wells to determine a theoretical ellipse of equal drawdown. The angle of rotation of this ellipse with respect to the working coordinate axes was determined by a procedure based on contouring the drawdowns at a given time. This ellipse, in turn, was used to estimate the directions and magnitudes of the horizontal components of the hydraulic conductivity tensor. The technique is applicable to confined, as well as leaky, aquifers. Sources of error in this technique include nonhomogeneity of the aquifer and partial penetration of the pumping and observation wells into the aquifer. The procedure presented may be used as an additional tool to verify computations of hydraulic conductivity anisotropy based on other techniques.