Characterizing the spatiotemporal variability of PM2.5 in Cusco,Peru using kriging with external drift

Advancing the understanding of spatiotemporal aspects of air pollution in the urban environment is an area where improved methods can be of great benefit to exposure assessment and policy support. This paper explores the potential of a technique known as kriging with external drift (KED) to provide high resolution maps of fine particulate matter for a downtown region of Cusco, Peru. There were three stages in this research. The first was to conduct a pilot level monitoring campaign to investigate ambient, regional, and street-level air pollutant concentrations for particulate matter (PM_2.5, PM₁₀) and carbon monoxide (CO) in the Province of Cusco. The second was to compile observations within a geographic information system (GIS) in order to characterize the proximal effect of the local transportation network, elevation, and land use classifications on PM_2.5. Third, regression, ordinary kriging and kriging with external drift were used to model PM_2.5 for three select time periods during a 24-h day. Statistical evaluations indicate kriging with external drift resulted in the strongest models explaining 64% of variability seen with morning particle concentrations, 25% for afternoon particles, and 53% in evening particles. These models capture spatial and temporal variability for air pollution in Cusco. These variations seem to be influenced, to varying degrees, by elevation, meteorological conditions, spatial location, and transportation characteristics. In conclusion, combining GIS, meteorological data and geostatistics proved to be a complementary suite of tools for incorporating spatiotemporal analysis into the air quality assessment.     

机动车污染排放模型研究综述

过去几十年,为了掌握机动车污染排放的规律和特征,向决策者提供科学有效的机动车污染控制措施,研究者们致力于研究机动车污染物排放的物化原理和影响机动车污染的主要因素,并据此建立多种尺度的机动车排放模型,以模拟城市区域或者街道的污染物排放.为了分析机动车的瞬态排放特征,目前的机动车排放模型研究正逐渐从宏观向微观发展,排放测试方法注重获取逐秒的排放数据,排放模型模拟的时间尺度和空间尺度逐步趋向微观.此外,机动车模型研究正趋向与交通模型进行耦合,从而揭示机动车在实际道路交通流中的排放特征.从机动车排放的主要影响因素、机动车排放测试、机动车排放因子模型及机动车排放清单等4个方面综述了国内外机动车排放研究现状和发展动向,对比并评价各种机动车排放模型方法的优缺点和适用范围,对我国的机动车排放模型发展方向进行了展望.     

A Pilot Indoor-Outdoor Study of Organic Particulate Matter and Particulate Mutagenicity

Abstract

Many large metropolitan areas experience elevated concentrations of ground-level ozone pollution during the summertime “smog season”. Local environmental or health agencies often need to make daily air pollution forecasts for public advisories and for input into decisions regarding abatement measures and air quality management. Such forecasts are usually based on statistical relationships between weather conditions and ambient air pollution concentrations. Multivariate linear regression models have been widely used for this purpose, and well-specified regressions can provide reasonable results. However, pollution-weather relationships are typically complex and nonlinear—especially for ozone—properties that might be better captured by neural networks. This study investigates the potential for using neural networks to forecast ozone pollution, as compared to traditional regression models. Multiple regression models and neural networks are examined for a range of cities under different climate and ozone regimes, enabling a comparative study of the two approaches. Model comparison statistics indicate that neural network techniques are somewhat (but not dramatically) better than regression models for daily ozone prediction, and that all types of models are sensitive to different weather-ozone regimes and the role of persistence in aiding predictions.     

The use of wind fields in a land use regression model to predict air pollution concentrations for health exposure studies

A methodology is developed to include wind flow effects in land use regression (LUR) models for predicting nitrogen dioxide (NO₂) concentrations for health exposure studies. NO₂ is widely used in health studies as an indicator of traffic-generated air pollution in urban areas. Incorporation of high-resolution interpolated observed wind direction from a network of 38 weather stations in a LUR model improved NO₂ concentration estimates in densely populated, high traffic and industrial/business areas in Toronto-Hamilton urban airshed (THUA) of Ontario, Canada. These small-area variations in air pollution concentrations that are probably more important for health exposure studies may not be detected by sparse continuous air pollution monitoring network or conventional interpolation methods. Observed wind fields were also compared with wind fields generated by Global Environmental Multiscale-High resolution Model Application Project (GEM-HiMAP) to explore the feasibility of using regional weather forecasting model simulated wind fields in LUR models when observed data are either sparse or not available. While GEM-HiMAP predicted wind fields well at large scales, it was unable to resolve wind flow patterns at smaller scales. These results suggest caution and careful evaluation of regional weather forecasting model simulated wind fields before incorporating into human exposure models for health studies. This study has demonstrated that wind fields may be integrated into the land use regression framework. Such integration has a discernable influence on both the overall model prediction and perhaps more importantly for health effects assessment on the relative spatial distribution of traffic pollution throughout the THUA. Methodology developed in this study may be applied in other large urban areas across the world.     

Pragmatic estimation of a spatio-temporal air quality model with irregular monitoring data

Statistical analyses of health effects of air pollution have increasingly used GIS-based covariates for prediction of ambient air quality in “land use” regression models. More recently these spatial regression models have accounted for spatial correlation structure in combining monitoring data with land use covariates. We present a flexible spatio-temporal modeling framework and pragmatic, multi-step estimation procedure that accommodates essentially arbitrary patterns of missing data with respect to an ideally complete space by time matrix of observations on a network of monitoring sites. The methodology incorporates a model for smooth temporal trends with coefficients varying in space according to Partial Least Squares regressions on a large set of geographic covariates and nonstationary modeling of spatio-temporal residuals from these regressions. This work was developed to provide spatial point predictions of PM_2.5 concentrations for the Multi-Ethnic Study of Atherosclerosis and Air Pollution (MESA Air) using irregular monitoring data derived from the AQS regulatory monitoring network and supplemental short-time scale monitoring campaigns conducted to better predict intra-urban variation in air quality. We demonstrate the interpretation and accuracy of this methodology in modeling data from 2000 through 2006 in six U.S. metropolitan areas and establish a basis for likelihood-based estimation.     

Stochastic modeling of atmospheric pollution: a spatial time-series framework. Part I: methodology

A geostatistical framework for joint spatiotemporal modeling of atmospheric pollution is presented. The spatiotemporal distribution of concentration levels is modeled as a joint realization of a collection of spatially correlated time series. Parametric temporal trend models, associated with long-term pollution variability are established from concentration profiles at monitoring stations. Such parameters, e.g., amplitude of seasonal variation, are then regionalized in space for determining trend models at any unmonitored location. The resulting spatiotemporal residual field, associated with short-term pollution variability, is also modeled as a collection of spatially correlated residual time series. Stochastic conditional simulation is proposed for generating alternative realizations of the concentration spatiotemporal distribution, which identify concentration measurements available at monitoring stations. Simulated realizations also reproduce the histogram of the sample data, and a model of their spatiotemporal correlation. Such alternative concentration fields can be used for risk analysis studies.     

A semiparametric statistical approach for forecasting SO2 and NO x concentrations

This study develops a new semiparametric statistical approach for urban air quality forecasting. Compared to conventional approaches, the semiparametric approach allows the model users to benefit from the positive aspects and alleviate the negative ones of parametric and nonparametric approaches. Two advantages of the approach lie in (1) the interpretation of the data set being easily decoded and used by the model and (2) its capability in dependence on prior assumption. To illustrate the performance of the proposed approach, three semiparametric regression models (i.e., linear-, quadratic-, and interactive-based semiparametric regression) are applied to an air quality forecasting problem in the city of Xiamen, China, and satisfactory training and prediction performance are obtained. The three models are also compared to three parametric and two nonparametric regression models. The results indicate that the predictive accuracy of semiparametric regression models is higher than those obtained from the parametric and stepwise cluster analysis models. However, the proposed three semiparametric regression models could be much favored, since they can be achieved more easily and rapidly than the artificial neural network model.     

Neural network and multiple regression models for PM10 prediction in Athens: a comparative assessment

Particulate atmospheric pollution in urban areas is considered to have significant impact on human health. Therefore, the ability to make accurate predictions of particulate ambient concentrations is important to improve public awareness and air quality management. This study examines the possibility of using neural network methods as tools for daily average particulate matter with aerodynamic diameter <10 microm (PM10) concentration forecasting, providing an alternative to statistical models widely used up to this day. Based on a data inventory, in a fixed central site in Athens, Greece, ranging over a two-year period, and using mainly meteorological variables as inputs, neural network models and multiple linear regression models were developed and evaluated. Comparison statistics used indicate that the neural network approach has an edge over regression models, expressed both in terms of prediction error (root mean square error values lower by 8.2-9.4%) and of episodic prediction ability (false alarm rate values lower by 7-13%). The results demonstrate that artificial neural networks (ANNs), if properly trained and formed, can provide adequate solutions to particulate pollution prognostic demands.     

Neural Network and Multiple Regression Models for PM10 Prediction in Athens: A Comparative Assessment

Abstract

Particulate atmospheric pollution in urban areas is considered to have significant impact on human health. Therefore, the ability to make accurate predictions of particulate ambient concentrations is important to improve public awareness and air quality management. This study examines the possibility of using neural network methods as tools for daily average particulate matter with aerodynamic diameter <10 µm (PM₁₀) concentration forecasting, providing an alternative to statistical models widely used up to this day. Based on a data inventory, in a fixed central site in Athens, Greece, ranging over a two-year period, and using mainly meteorological variables as inputs, neural network models and multiple linear regression models were developed and evaluated. Comparison statistics used indicate that the neural network approach has an edge over regression models, expressed both in terms of prediction error (root mean square error values lower by 8.2–9.4%) and of episodic prediction ability (false alarm rate values lower by 7–13%). The results demonstrate that artificial neural networks (ANNs), if properly trained and formed, can provide adequate solutions to particulate pollution prognostic demands.     

Ozone predictions in Atlanta, Georgia: analysis of the 1999 ozone season

Ozone prediction has become an important activity in many U.S. ozone nonattainment areas. In this study, we describe the ozone prediction program in the Atlanta metropolitan area and analyze the performance of this program during the 1999 ozone-forecasting season. From May to September, a team of 10 air quality regulators, meteorologists, and atmospheric scientists made a daily prediction of the next-day maximum 8-hr average ozone concentration. The daily forecast was made aided by two linear regression models, a 3-dimensional air quality model, and the no-skill ozone persistence model. The team's performance is compared with the numerical models using several numerical indicators. Our analysis indicated that (1) the team correctly predicted next-day peak ozone concentrations 84% of the time, (2) the two linear regression models had a better performance than a 3-dimensional air quality model, (3) persistence was a strong predictor of ozone concentrations with a performance of 78%, and (4) about half of the team's wrong predictions could be prevented with improved meteorological predictions.     

Back-extrapolation of estimates of exposure from current land-use regression models

Land use regression has been used in epidemiologic studies to estimate long-term exposure to air pollution within cities. The models are often developed toward the end of the study using recent air pollution data. Given that there may be spatially-dependent temporal trends in urban air pollution and that there is interest for epidemiologists in assessing period-specific exposures, especially early-life exposure, methods are required to extrapolate these models back in time. We present herein three new methods to back-extrapolate land use regression models. During three two-week periods in 2005–2006, we monitored nitrogen dioxide (NO₂) at about 130 locations in Montreal, Quebec, and then developed a land-use regression (LUR) model. Our three extrapolation methods entailed multiplying the predicted concentrations of NO₂ by the ratio of past estimates of concentrations from fixed-site monitors, such that they reflected the change in the spatial structure of NO₂ from measurements at fixed-site monitors. The specific methods depended on the availability of land use and traffic-related data, and we back-extrapolated the LUR model to 10 and 20 years into the past. We then applied these estimates to residential information from subjects enrolled in a case–control study of postmenopausal breast cancer that was conducted in 1996.Observed and predicted concentrations of NO₂ in Montreal decreased and were correlated in time. The estimated concentrations using the three extrapolation methods had similar distributions, except that one method yielded slightly lower values. The spatial distributions varied slightly between methods. In the analysis of the breast cancer study, the odds ratios were insensitive to the method but varied with time: for a 5 ppb increase in NO₂ using the 2006 LUR the odds ratio (OR) was about 1.4 and the ORs in predicted past concentrations of NO₂ varied (OR～1.2 for 1985 and OR～1.3–1.5 for 1996). Thus, the ORs per unit exposure increased with time as the range and variance of the spatial distributions decreased, and this is due partly to the regression coefficient being approximately inversely proportional to the variance of exposure. Changing spatial variability complicates interpretation and this may have important implications for the management of risk. Further studies are needed to estimate the accuracy of the different methods.     

Impacts of Meteorological Factors on PM10: Artificial Neural Networks (ANN) and Multiple Linear Regression (MLR) Approaches

In this study, prediction capacities of multi-linear regression (MLR) and artificial neural networks (ANN) onto coarse particulate matter (PM₁₀) concentrations were investigated. Different meteorological factors on particulate pollution were chosen for operating variables in the model analyses. Two different regions (urban and industrial) were identified in the region of Kocaeli, Turkey. All data sets were obtained from air quality monitoring network of the Ministry of Environment and Urban Planning, and 120 data sets were used in the MLR and ANN models. Regression equations explained the effects of the meteorological factors in MLR analyses. In the ANN model, backpropagation network with two hidden layers has achieved the best prediction efficiency. Determination coefficients and error values were examined for each model. ANN models displayed more accurate results compared to MLR.     

Ozone Predictions in Atlanta,Georgia: Analysis of the 1999 Ozone Season

ABSTRACT

Ozone prediction has become an important activity in many U.S. ozone nonattainment areas. In this study, we describe the ozone prediction program in the Atlanta metropolitan area and analyze the performance of this program during the 1999 ozone-forecasting season. From May to September, a team of 10 air quality regulators, meteorologists, and atmospheric scientists made a daily prediction of the next-day maximum 8-hr average ozone concentration. The daily forecast was made aided by two linear regression models, a 3-dimensional air quality model, and the no-skill ozone persistence model. The team's performance is compared with the numerical models using several numerical indicators. Our analysis indicated that (1) the team correctly predicted next-day peak ozone concentrations 84% of the time, (2) the two linear regression models had a better performance than a 3-dimensional air quality model, (3) persistence was a strong predictor of ozone concentrations with a performance of 78%, and (4) about half of the team's wrong predictions could be prevented with improved meteorological predictions.     

Predicting regional space–time variation of PM2.5 with land-use regression model and MODIS data

Purpose  

Existing land-use regression (LUR) models use land use/cover, population, and traffic information to predict long-term intra-urban variation of air pollution. These models are limited to explaining spatial variation of air pollutants, and few of them are capable of addressing temporal variability. This article proposes a space–time LUR model at a regional scale by incorporating aerosol optical depth (AOD) data from the Moderate Resolution Imaging Spectroradiometer (MODIS).     

Modeling emissions for three-dimensional atmospheric chemistry transport models

Poor air quality is still a threat for human health in many parts of the world. In order to assess measures for emission reductions and improved air quality, three-dimensional atmospheric chemistry transport modeling systems are used in numerous research institutions and public authorities. These models need accurate emission data in appropriate spatial and temporal resolution as input. This paper reviews the most widely used emission inventories on global and regional scales and looks into the methods used to make the inventory data model ready. Shortcomings of using standard temporal profiles for each emission sector are discussed, and new methods to improve the spatiotemporal distribution of the emissions are presented. These methods are often neither top-down nor bottom-up approaches but can be seen as hybrid methods that use detailed information about the emission process to derive spatially varying temporal emission profiles. These profiles are subsequently used to distribute bulk emissions such as national totals on appropriate grids. The wide area of natural emissions is also summarized, and the calculation methods are described. Almost all types of natural emissions depend on meteorological information, which is why they are highly variable in time and space and frequently calculated within the chemistry transport models themselves. The paper closes with an outlook for new ways to improve model ready emission data, for example, by using external databases about road traffic flow or satellite data to determine actual land use or leaf area. In a world where emission patterns change rapidly, it seems appropriate to use new types of statistical and observational data to create detailed emission data sets and keep emission inventories up-to-date.

Implications: Emission data are probably the most important input for chemistry transport model (CTM) systems. They need to be provided in high spatial and temporal resolution and on a grid that is in agreement with the CTM grid. Simple methods to distribute the emissions in time and space need to be replaced by sophisticated emission models in order to improve the CTM results. New methods, e.g., for ammonia emissions, provide grid cell–dependent temporal profiles. In the future, large data fields from traffic observations or satellite observations could be used for more detailed emission data.     

Forecasting air quality time series using deep learning

This paper presents one of the first applications of deep learning (DL) techniques to predict air pollution time series. Air quality management relies extensively on time series data captured at air monitoring stations as the basis of identifying population exposure to airborne pollutants and determining compliance with local ambient air standards. In this paper, 8 hr averaged surface ozone (O₃) concentrations were predicted using deep learning consisting of a recurrent neural network (RNN) with long short-term memory (LSTM). Hourly air quality and meteorological data were used to train and forecast values up to 72 hours with low error rates. The LSTM was able to forecast the duration of continuous O₃ exceedances as well. Prior to training the network, the dataset was reviewed for missing data and outliers. Missing data were imputed using a novel technique that averaged gaps less than eight time steps with incremental steps based on first-order differences of neighboring time periods. Data were then used to train decision trees to evaluate input feature importance over different time prediction horizons. The number of features used to train the LSTM model was reduced from 25 features to 5 features, resulting in improved accuracy as measured by Mean Absolute Error (MAE). Parameter sensitivity analysis identified look-back nodes associated with the RNN proved to be a significant source of error if not aligned with the prediction horizon. Overall, MAE's less than 2 were calculated for predictions out to 72 hours.

Implications: Novel deep learning techniques were used to train an 8-hour averaged ozone forecast model. Missing data and outliers within the captured data set were replaced using a new imputation method that generated calculated values closer to the expected value based on the time and season. Decision trees were used to identify input variables with the greatest importance. The methods presented in this paper allow air managers to forecast long range air pollution concentration while only monitoring key parameters and without transforming the data set in its entirety, thus allowing real time inputs and continuous prediction.     

Comparing universal kriging and land-use regression for predicting concentrations of gaseous oxides of nitrogen (NOx) for the Multi-Ethnic Study of Atherosclerosis and Air Pollution (MESA Air)

BACKGROUND: Epidemiological studies that assess the health effects of long-term exposure to ambient air pollution are used to inform public policy. These studies rely on exposure models that use data collected from pollution monitoring sites to predict exposures at subject locations. Land use regression (LUR) and universal kriging (UK) have been suggested as potential prediction methods. We evaluate these approaches on a dataset including measurements from three seasons in Los Angeles, CA. METHODS: The measurements of gaseous oxides of nitrogen (NOx) used in this study are from a "snapshot" sampling campaign that is part of the Multi-Ethnic Study of Atherosclerosis and Air Pollution (MESA Air). The measurements in Los Angeles were collected during three two-week periods in the summer, autumn, and winter, each with about 150 sites. The design included clusters of monitors on either side of busy roads to capture near-field gradients of traffic-related pollution. LUR and UK prediction models were created using geographic information system (GIS)-based covariates. Selection of covariates was based on 10-fold cross-validated (CV) R(2) and root mean square error (RMSE). Since UK requires specialized software, a computationally simpler two-step procedure was also employed to approximate fitting the UK model using readily available regression and GIS software. RESULTS: UK models consistently performed as well as or better than the analogous LUR models. The best CV R(2) values for season-specific UK models predicting log(NOx) were 0.75, 0.72, and 0.74 (CV RMSE 0.20, 0.17, and 0.15) for summer, autumn, and winter, respectively. The best CV R(2) values for season-specific LUR models predicting log(NOx) were 0.74, 0.60, and 0.67 (CV RMSE 0.20, 0.20, and 0.17). The two-stage approximation to UK also performed better than LUR and nearly as well as the full UK model with CV R(2) values 0.75, 0.70, and 0.70 (CV RMSE 0.20, 0.17, and 0.17) for summer, autumn, and winter, respectively. CONCLUSION: High quality LUR and UK prediction models for NOx in Los Angeles were developed for the three seasons based on data collected for MESA Air. In our study, UK consistently outperformed LUR. Similarly, the 2-step approach was more effective than the LUR models, with performance equal to or slightly worse than UK.     

Space-time analysis of the Air Quality Model Evaluation International Initiative (AQMEII) Phase 1 air quality simulations

This study presents an evaluation of summertime ozone concentrations over North America (NA) and Europe (EU) using the database generated from Phase 1 of the Air Quality Model Evaluation International Initiative (AQMEII). The analysis focuses on identifying temporal and spatial features that can be used to stratify operational model evaluation metrics and to test the extent to which the various modeling systems can replicate the features seen in the observations. Using a synoptic map typing approach, it is demonstrated that model performance varies with meteorological conditions associated with specific synoptic-scale flow patterns over both eastern NA and EU. For example, the root mean square error of simulated daily maximum 8-hr ozone was twice as high when cloud fractions were high compared with when cloud fractions were low over eastern NA. Furthermore, results show that over both NA and EU the regional models participating in AQMEII were able to better reproduce the observed variance in ambient ozone levels than the global model used to specify chemical boundary conditions, although the variance simulated by almost all regional models is still less that the observed variance on all spatiotemporal scales. In addition, all modeling systems showed poor correlations with observed fluctuations on the intraday time scale over both NA and EU. Furthermore, a methodology is introduced to distinguish between locally influenced and regionally representative sites for the purpose of model evaluation. Results reveal that all models have worse model performance at locally influenced sites. Overall, the analyses presented in this paper show how observed temporal and spatial information can be used to stratify operational model performance statistics and to test the modeling systems’ ability to replicate observed temporal and spatial features, especially at scales the modeling systems are designed to capture.

Implications: The analyses presented in this paper demonstrate how observed temporal and spatial information can be used to stratify operational model performance and to test the modeling systems’ ability to replicate observed temporal and spatial features. Decisions for the improvement of regional air quality models should be based on the information derived from only regionally representative sites.     

Coupling air quality and land use modeling within an optimization framework

Land use regulations and air quality standards can be effective tools to control air pollution. Atmospheric transport/chemistry simulation models could be used to develop suitable regulations and standards; however, these models are not as efficient as air quality management models developed from embedding governing equations for atmospheric transport/chemistry into an optimization framework. Formulations of two steady-state air quality management models are presented to facilitate the development or evaluation of land use strategies to protect regional air quality from pollution generated from distributed point or nonpoint sources. Both models are linear programs constructed with equations that describe steady-state atmospheric pollutant fate and transport. The first model determines feasible pollutant loading patterns for multiple land use activities to accommodate the greatest regional population. The second model ascertains patterns of expanded land use which have a minimum impact on air quality. The primary goal of this paper is to explain how air pollution and land use modeling may be coupled to create an effective management tool to aid scientists and engineers with decisions affecting air quality and land use. The secondary goal is to show the types of air quality and regulatory information which could be obtained from these models. This latter goal is attained with general conclusions as consequence of applying ‘duality theory.’