Economic and Social Impact Assessment of the Alternatives to DDT Usage for Antifouling Paint Production in China

China is the only nation that uses DDT in antifouling pain at present, approximately 5% of DDT is applied as the additive of the antifouling paint production. Therefore, actions shall be taken urgently for banning the use of DDT and substituting with non-POPs alternatives in antifouling paints. The paper researches the social and economic backgrounds of DDT booster antifouling paint production and usage, analyzes the social and economic impact assessment of the alternatives to DDT usage for antifouling paint. The implementation of the project of alternatives will completely eliminate the adverse impact of DDT booster antifouling paint on terrestrial, marine ecosystem and human health. The broad use of alkali silicate and pepper alkali as substitutes will be feasible if appropriate measures will be taken to encourage their development, and the social and economic risk will be reduced to accepted levels.     

Fate of Irgarol 1051, diuron and their main metabolites in two UK marine systems after restrictions in antifouling paints

Two major antifouling biocides used worldwide, Irgarol 1051 and diuron, and their degradation products in Shoreham Harbour and Brighton Marina, UK were studied during 2003-2004. The highest concentrations of Irgarol 1051 were 136 and 102 ng L(-1) in water and 40 and 49 ng g(-1) dry weight in sediments for Shoreham Harbour and Brighton Marina, respectively. As the degradation product of Irgarol 1051, M1 was also widespread, with the highest concentration of 59 ng L(-1) in water and 23 ng g(-1) in sediments in Shoreham Harbour, and 37 ng L(-1) in water and 5.6 ng g(-1) in sediments in Brighton Marina. The target compounds showed enhanced concentrations during the boating season (May-July), when boats were being re-painted (January-February), and where the density of pleasure crafts was high. Overall, the concentration of Irgarol 1051 decreased significantly from late 2000 to early 2004, indicating the effectiveness of controlling its concentrations in the marine environment following restricted use. Diuron was only detected in 14% of water samples, and mostly absent from sediment samples.     

Using the WTO/TBT enquiry point to monitor tendencies in the regulation of environment, health, and safety issues affecting the chemical industry

The growing importance of technical regulation affecting the use and sale of chemical products is a topic of interest not only for the chemical industry, but also for governments, nongovernmental organizations, consumers, and interested communities. The results of such regulation on behalf of the environment, health and safety of individuals, as well as its economic effects on industrial activity, are well understood in the United States and recently in the European Union. In less developed countries, however, the general level of public understanding of these issues is still minimal. It is common knowledge that the so-called "regulatory asymmetry" between countries at different levels of development contributes to the establishment of technical barriers to trade. Such asymmetries, however, also have other impacts: the displacement of polluting industrial sectors to countries which have less demanding regulations, the concentration of unsafe and harmful environmental conditions in certain parts of the globe, and the competitive disadvantage for industries located in countries where control is more rigid. This study analyses information on a wide range of technical regulations issued by World Trade Organization (WTO) members, and focuses on those regulations that affect the chemical industry. This information is available through the WTO Enquiry Points, organizations created in each country to administrate the Technical Barriers to Trade Agreement (TBT). This article consists of an analysis of 4,301 notifications of technical regulations by WTO member states in the 7-year period following the establishment of the WTO in 1995. Starting from this mass of information, 585 notifications that affect the circulation or use of chemical products were isolated. Of this group, 71% refer to only 15 countries. This group of notifications was further classified according to their motivation (the environment, health, safety), by the type of product affected (medications, fuels, hazardous products, etc.), by the type of country where it was established (developed, emerging or developing) and the existing conformity assessment mechanism (prohibition, licenses, certification, labeling, etc.). Beyond identifying tendencies in specific industrial sectors, the notifications studied here reach more than 100 chemical products, substances, preparations and other materials, which are subject to various levels of restrictions in different parts of the globe because of their composition or adverse reactions during their life cycles.     

Sources and environmental behavior of dechlorane plus--a review

Intensive research has been carried out in the past few years on the occurrence and behavior of dechlorane plus (DP) in the environment, biota and humans. This review summarizes the information and research results generated since DP was first identified in the environment in 2006. We describe the reported measurement methods for DP and provide an integrated picture of its occurrence and behavior as an environmental contaminant. DP in ambient air and sediments is characterized by strong source related concentration elevations and temporal trends reflecting commercial use. Long-range atmospheric transportation of DP has been observed in remote regions, indicating a global presence of DP. Levels of DP in biota and in humans further reinforce its source related distribution. The change in DP isomer ratio in various environmental matrices from commercial products indicates that the behavior of the two isomers is not the same in the environment or in biota. With only limited data available so far, the biomagnification of DP in aquatic biota has not been conclusively demonstrated. This review also looks at reported dechlorination products of DP that might be of interest in future research.     

Environmental release and behavior of brominated flame retardants

Recently, environmental problems relating to brominated flame retardants (BFRs) have become a matter of greater concern than ever before, because of the recent marked increase in levels of polybrominated diphenyl ethers (PBDEs) found in human milk in Sweden and North America. The question that arises is whether environmental levels of PBDEs and other BFRs will continue to increase, causing toxic effects to humans. In an attempt to elucidate the current state of the science of BFRs, we review the consumer demand for BFRs (mainly in Japan), the characteristics of waste flame-retarded products, sources of emission, environmental behavior, routes of exposure of humans, temporal trends, and thermal-breakdown products of BFRs. At present, flame-retarded consumer products manufactured 10-20 years ago, when PBDEs were frequently used, are being dumped. The possible major sources of emission of BFRs into the environment are effluent and flue gases from BFR factories and other facilities processing BFRs. With respect to the environmental behavior of BFRs, the lower brominated compounds are, on the whole, predicted to be more volatile, more water soluble, and more bioaccumulative than the higher brominated compounds. The most probable route for exposure of the general human population to PBDEs, especially the lower brominated congeners, is through the diet. The release of BFRs from consumer products treated with these compounds could also lead to human exposure. Temporal trends in PBDE levels in the environment and in humans worldwide seem to vary considerably, depending on the regions or country, with possible reflections of the historic and current use of PBDEs. The environment and the general human population are also exposed to the thermal-breakdown products of PBDEs, such as polybrominated and mixed brominated/chlorinated dibenzo-p-dioxins and dibenzofurans (PBDDs/DFs and mixed PXDDs/DFs).     

Pharmaceuticals and personal care products (PPCPs): A review on environmental contamination in China

Pharmaceuticals and personal care products (PPCPs) which contain diverse organic groups, such as antibiotics, hormones, antimicrobial agents, synthetic musks, etc., have raised significant concerns in recently years for their persistent input and potential threat to ecological environment and human health. China is a large country with high production and consumption of PPCPs for its economic development and population growth in recent years. This may result in PPCP contamination in different environmental media of China. This review summarizes the current contamination status of different environment media, including sewage, surface water, sludge, sediments, soil, and wild animals, in China by PPCPs. The human body burden and adverse effects derived from PPCPs are also evaluated. Based on this review, it has been concluded that more contamination information of aquatic environment and wildlife as well as human body burden of PPCPs in different areas of China is urgent. Studies about their environmental behavior and control technologies need to be conducted, and acute and chronic toxicities of different PPCP groups should be investigated for assessing their potential ecological and health risks.     

Life cycle assessment part 1: framework, goal and scope definition, inventory analysis, and applications

Sustainable development requires methods and tools to measure and compare the environmental impacts of human activities for the provision of goods and services (both of which are summarized under the term "products"). Environmental impacts include those from emissions into the environment and through the consumption of resources, as well as other interventions (e.g., land use) associated with providing products that occur when extracting resources, producing materials, manufacturing the products, during consumption/use, and at the products' end-of-life (collection/sorting, reuse, recycling, waste disposal). These emissions and consumptions contribute to a wide range of impacts, such as climate change, stratospheric ozone depletion, tropospheric ozone (smog) creation, eutrophication, acidification, toxicological stress on human health and ecosystems, the depletion of resources, water use, land use, and noise-among others. A clear need, therefore, exists to be proactive and to provide complimentary insights, apart from current regulatory practices, to help reduce such impacts. Practitioners and researchers from many domains come together in life cycle assessment (LCA) to calculate indicators of the aforementioned potential environmental impacts that are linked to products-supporting the identification of opportunities for pollution prevention and reductions in resource consumption while taking the entire product life cycle into consideration. This paper, part 1 in a series of two, introduces the LCA framework and procedure, outlines how to define and model a product's life cycle, and provides an overview of available methods and tools for tabulating and compiling associated emissions and resource consumption data in a life cycle inventory (LCI). It also discusses the application of LCA in industry and policy making. The second paper, by Pennington et al. (Environ. Int. 2003, in press), highlights the key features, summarises available approaches, and outlines the key challenges of assessing the aforementioned inventory data in terms of contributions to environmental impacts (life cycle impact assessment, LCIA).     

Potential release scenarios for carbon nanotubes used in composites

The expected widespread use of carbon nanotube (CNT)-composites in consumer products calls for an assessment of the possible release and exposure to workers, consumers and the environment. Release of CNTs may occur at all steps in the life cycle of products, but to date only limited information is available about release of CNTs from actual products and articles. As a starting point for exposure assessment, exploring sources and pathways of release helps to identify relevant applications and situations where the environment and especially humans may encounter releases of CNTs. It is the aim of this review to identify various potential release scenarios for CNTs used in polymers and identify the greatest likelihood of release at the various stages throughout the life-cycle of the product. The available information on release of CNTs from products and articles is reviewed in a first part. In a second part nine relevant release scenarios are described in detail: injection molding, manufacturing, sports equipment, electronics, windmill blades, fuel system components, tires, textiles, incineration, and landfills. Release from products can potentially occur by two pathways; (a) where free CNTs are released directly, or more frequently (b) where the initial release is a particle with CNTs embedded in the matrix, potentially followed by the subsequent release of CNTs from the matrix.The potential for release during manufacturing exists for all scenarios, however, this is also the situation when exposure can be best controlled. For most of the other life cycle stages and their corresponding release scenarios, potential release of CNTs can be considered to be low, but it cannot be excluded totally. Direct release to the environment is also considered to be very low for most scenarios except for the use of CNTs in tires where significant abrasion during use and release into the environment would occur. Also the possible future use of CNTs in textiles could result in consumer exposure. A possibility for significant release also exists during recycling operations when the polymers containing CNTs are handled together with other polymers and mainly occupational users would be exposed.It can be concluded that in general, significant release of CNTs from products and articles is unlikely except in manufacturing and subsequent processing, tires, recycling, and potentially in textiles. However except for high energy machining processes, most likely the resulting exposure for these scenarios will be low and to a non-pristine form of CNTs. Actual exposure studies, which quantify the amount of material released should be conducted to provide further evidence for this conclusion.     

Monitoring of radiation and radioactivity in the environment

This report lists the programs for monitoring radiation and radioactivity in the environment that are known to be in operation or to have been in operation recently. It is intended as a guide to be used when seeking information on the programs of other institutions. Sources of the data have been the literature and personal correspondence and discussions.The programs are divided into the categories of weapons test fallout, natural activity and environmental monitoring of releases from specific facilities. Where possible, the types of measurements being made are also listed. While the data are as up to date as possible the field is changing rapidly and there may be ommissions.     

Environmental levels, toxicity and human exposure to tributyltin (TBT)-contaminated marine environment. a review. b_antizar@hotmail.com

Tributyltin (TBT) is a toxic chemical used for various industrial purposes such as slime control in paper mills, disinfection of circulating industrial cooling waters, antifouling agents, and the preservation of wood. Due to its widespread use as an antifouling agent in boat paints, TBT is a common contaminant of marine and freshwater ecosystems exceeding acute and chronic toxicity levels. TBT is the most significant pesticide in marine and freshwaters in Europe and consequently its environmental level, fate, toxicity and human exposure are of current concern. Thus, the European Union has decided to specifically include TBT compounds in its list of priority compounds in water in order to control its fate in natural systems, due to their toxic, persistent, bioaccumulative and endocrine disruptive characteristics. Additionally, the International Maritime Organization has called for a global treaty that bans the application of TBT-based paints starting 1 of January 2003, and total prohibition by 1 of January 2008. This paper reviews the state of the science regarding TBT, with special attention paid to the environmental levels, toxicity, and human exposure. TBT compounds have been detected in a number of environmental samples. In humans, organotin compounds have been detected in blood and in the liver. As for other persistent organic pollutants, dietary intake is most probably the main route of exposure to TBT compounds for the general population. However, data concerning TBT levels in foodstuffs are scarce. It is concluded that investigations on experimental toxicity, dietary intake, potential human health effects and development of new sustainable technologies to remove TBT compounds are clearly necessary.     

Novel brominated flame retardants: a review of their analysis, environmental fate and behaviour

This review summarises current knowledge about production volumes, physico-chemical properties, analysis, environmental occurrence, fate and behaviour and human exposure to the "novel" brominated flame retardants (NBFRs). We define the term NBFRs as relating to BFRs which are new to the market or newly/recently observed in the environment. Restrictions and bans on the use of some polybrominated diphenyl ether (PBDE) formulations, in many jurisdictions, have created a market for the use of NBFRs. To date, most data on NBFRs have arisen as additional information generated by research designed principally to study more "traditional" BFRs, such as PBDEs. This has led to a wide variety of analytical approaches for sample extraction, extract purification and instrumental analysis of NBFRs. An overview of environmental occurrence in abiotic matrices, aquatic biota, terrestrial biota and birds is presented. Evidence concerning the metabolism and absorption of different NBFRs is reviewed. Human exposure to NBFRs via different exposure pathways is discussed, and research gaps related to analysis, environmental sources, fate, and behaviour and human exposure are identified.     

The effects of phthalates in the cardiovascular and reproductive systems: A review

Every year millions of tons of plastic are produced around the world and humans are increasingly exposed to them. This constant exposure to plastics has raised some concerns against human health, particularly when it comes to phthalates. These compounds have endocrine-disrupting properties, as they have the ability to bind molecular targets in the body and interfere with hormonal function and quantity. The main use of phthalates is to give flexibility to polyvinyl chloride (PVC) polymers. Phthalates are found in a variety of industrial and consumer products, and as they are not covalently bound to the plastic, phthalates contaminate the environment from which human exposure occurs. Studies in human and animal populations suggest a correlation between phthalate exposure and adverse health outcomes, particularly at the reproductive and cardiovascular systems, however there is much less information about the phthalate toxicity of the later. Thus, the main purpose of this review is to present the studies relating the effects already stated of phthalates on the cardiovascular and reproductive systems, and also present the link between these two systems.     

Fate, behavior and effects of surfactants and their degradation products in the environment

Surfactants are widely used in household and industrial products. After use, surfactants as well as their products are mainly discharged into sewage treatment plants and then dispersed into the environment through effluent discharge into surface waters and sludge disposal on lands. Surfactants have different behavior and fate in the environment. Nonionic and cationic surfactants had much higher sorption on soil and sediment than anionic surfactants such as LAS. Most surfactants can be degraded by microbes in the environment although some surfactants such as LAS and DTDMAC as well as alkylphenols may be persistent under anaerobic conditions. LAS were found to degrade in sludge amended soils with a half-lives of 7 to 33 days. Most surfactants are not acutely toxic to organisms at environmental concentrations and aquatic chronic toxicity of surfactants occurred at concentrations usually greater than 0.1 mg/L. However, alkylphenols have shown to be capable of inducing the production of vitellogenin in male fish at a concentration as low as 5 microg/L. More toxicity data are needed to assess the effects on terrestrial organisms such as plants.     

Imposex as a biomonitoring tool for marine pollution by tributyltin: some further observations

Imposex, i.e., the imposition of male sexual characteristics on female neograstropods, has been used worldwide as a bioindicator of pollution by the antifouling agent TBT as well as to assess the related ecological impact. The recent total ban on the use of TBT in the maritime industry has been partly based on the use of such a biomarker. This is mainly based on the assumption that no other pollutant, or environmental stress, is able to induce such a biological response. Nonetheless, several authors had challenged this idea. The present paper will present further field observations on imposex in Hexaplex trunculus from Malta (Central Mediterranean) which may help clarify this issue. Furthermore, the incidence of imposex in this species will be related to body burdens and to the environmental levels of organotins as measured analytically. First histological observations will also be presented which may help clarify the ecological significance of this response in this species. Finally a number of alternative scenarios regarding the relationship between imposex and TBT will be discussed.     

Provenancing anthropogenic Pb within the fluvial environment: developments and challenges in the use of Pb isotopes

The potentially deleterious presence of ore-derived Pb within riverine environments has been a long-term impact of industrial and anthropogenic activity in general. The surface drainage network has been widely established as a key transport mechanism and storage environment for anthropogenically-derived Pb and other potentially harmful trace metals. Lead isotopes ((204)Pb, (206)Pb, (207)Pb, (208)Pb) have been utilized as a geochemical tracer of Pb origin in a variety of environmental media, notably in atmospheric aerosols. However, given the relative complexity of dispersal processes within riverine environments, the use of Pb isotopes as geochemical tracers has been relatively limited and it is only relatively recently that a growing body of research has applied Pb isotopes to provenancing fluvially-dispersed Pb. This paper seeks to synthesize the developments in the use of Pb isotopes within riverine environments. In doing so it outlines the Pb-isotope fingerprinting technique and associated analytical developments, and assesses the application of Pb isotopes in establishing the origin and dispersal mechanisms of anthropogenically- and geogenically-derived Pb at a range of temporal and spatial scales. Of particular importance are the approaches quantifying source inputs using Pb isotopic signatures and the challenges faced, and options available in quantifying source inputs at the catchment scale; where Pb may be sourced from a variety (n=>2) of sources. The Pb isotopic signature of contemporary riverine Pb loads is shown to reflect a spatially complex influence of mineralization chemistry, anthropogenic activity as well as the hydro-morphological controls exerted upon Pb release, dispersal and storage. In relation to this, the long-term environmental legacy, and its influence upon Pb fingerprinting studies, of tetra-ethyl Pb, sourced from the combustion of leaded-petrol is also discussed. Finally, this paper places the use of Pb isotopes in the context of recently developed Cu and Zn isotopic fingerprinting techniques and assesses the role of Pb, Cu and Zn isotopes in a multi-proxy approach to geochemical tracing.     

Effects of environmental illiteracy and environmental awareness among middle school students on environmental behavior

This study proposes and employs a structural model to examine the effects of environmental literacy, environmental awareness, environmental attitudes, and environmental behavior among middle school students in Eski?ehir on their purchase of environmentally friendly products. In the proposed structural model, environmental illiteracy and environmental awareness were the exogenous latent variables, while pro-environmental attitude, pro-environmental behavior, and the purchase of environmentally friendly products were the endogenous latent variables. The latent variable of environmental illiteracy did not have a statistically significant effect on environmental attitudes and purchase of environmentally friendly products, whereas environmental awareness had a positive effect on pro-environmental attitudes and the purchase of environmentally friendly products. These findings indicate that students with environmental awareness also develop positive attitudes toward the environment, and the presence of a positive attitude toward the environment leads them to display pro-environmental behaviors and adopt a positive attitude toward environmentally friendly products.     

Analysis of currently available data for characterising the risk of engineered nanomaterials to the environment and human health--lessons learned from four case studies

Production volumes and the use of engineered nanomaterials in many innovative products are continuously increasing, however little is known about their potential risk for the environment and human health. We have reviewed publicly available hazard and exposure data for both, the environment and human health and attempted to carry out a basic risk assessment appraisal for four types of nanomaterials: fullerenes, carbon nanotubes, metals, and metal oxides (ENRHES project 2009(1)). This paper presents a summary of the results of the basic environmental and human health risk assessments of these case studies, highlighting the cross cutting issues and conclusions about fate and behaviour, exposure, hazard and methodological considerations. The risk assessment methodology being the basis for our case studies was that of a regulatory risk assessment under REACH (ECHA, 2008(2)), with modifications to adapt to the limited available data. If possible, environmental no-effect concentrations and human no-effect levels were established from relevant studies by applying assessment factors in line with the REACH guidance and compared to available exposure data to discuss possible risks. When the data did not allow a quantitative assessment, the risk was assessed qualitatively, e.g. for the environment by evaluating the information in the literature to describe the potential to enter the environment and to reach the potential ecological targets. Results indicate that the main risk for the environment is expected from metals and metal oxides, especially for algae and Daphnia, due to exposure to both, particles and ions. The main risks for human health may arise from chronic occupational inhalation exposure, especially during the activities of high particle release and uncontrolled exposure. The information on consumer and environmental exposure of humans is too scarce to attempt a quantitative risk characterisation. It is recognised that the currently available database for both, hazard and exposure is limited and there are high uncertainties in any conclusion on a possible risk. The results should therefore not be used for any regulatory decision making. Likewise, it is recognised that the REACH guidance was developed without considering the specific behaviour and the mode of action of nanomaterials and further work in the generation of data but also in the development of methodologies is required.     

Biodegradation potential of the genus Rhodococcus

A large number of aromatic compounds and organic nitriles, the two groups of compounds covered in this review, are intermediates, products, by-products or waste products of the chemical and pharmaceutical industries, agriculture and the processing of fossil fuels. The majority of these synthetic substances (xenobiotics) are toxic and their release and accumulation in the environment pose a serious threat to living organisms. Bioremediation using various bacterial strains of the genus Rhodococcus has proved to be a promising option for the clean-up of polluted sites. The large genomes of rhodococci, their redundant and versatile catabolic pathways, their ability to uptake and metabolize hydrophobic compounds, to form biofilms, to persist in adverse conditions and the availability of recently developed tools for genetic engineering in rhodococci make them suitable industrial microorganisms for biotransformations and the biodegradation of many organic compounds. The peripheral and central catabolic pathways in rhodococci are characterized for each type of aromatics (hydrocarbons, phenols, halogenated, nitroaromatic, and heterocyclic compounds) in this review. Pathways involved in the hydrolysis of nitrile pollutants (aliphatic nitriles, benzonitrile analogues) and the corresponding enzymes (nitrilase, nitrile hydratase) are described in detail. Examples of regulatory mechanisms for the expression of the catabolic genes are given. The strains that efficiently degrade the compounds in question are highlighted and examples of their use in biodegradation processes are presented.