Characterization and possible uses of ashes from wastewater treatment plants

This work, on the ashes from the wastewater treatment plant of Galindo (Vizcaya, Spain), has been outlined with the purpose of finding their physico-chemical properties and suggesting possible applications. Ashes contain important quantities of iron, calcium, silica, alumina and phosphates. X-Ray diffraction data make it possible to estimate the mineralogical compositions of the original ashes and also, after thermal treatment at 1200 and 1300 degrees C, the main reactions occurring in thermal treatment. Particle size analysis makes it possible to classify ashes as a very fine powdered material. The thermal treatment leads to a densification of the material and provokes losses of weight mainly due to the elimination of water, carbon dioxide and sulphur trioxide. Application tests show that ashes are not suitable for landfill and similar applications, because of their plastic properties. Testing for pozzolanic character, after the ashes had been heated at 1200 degrees C, did not lead to a strong material probably due to low contents in silica and alumina or to requiring a higher heating temperature. Thermal treatment leads to densification of the material with a considerable increase of compressive strength of the probes. The use of additives (clays and powdered glass) to improve ceramic properties of ashes will be the aim of a future work.     

Survey of carbonization facilities for municipal solid waste treatment in Japan

The operations of carbonization facilities for municipal solid waste treatment in Japan were examined. Input waste, system processes, material flows, quality of char and its utilization, fuel and chemical consumption, control of facility emissions, and trouble areas in facility operation were investigated and analyzed. Although carbonization is a technically available thermochemical conversion method for municipal solid waste treatment, problems of energy efficiency and char utilization must be solved for carbonization to be competitive. Possible solutions include (1) optimizing the composition of input waste, treatment scale, organization of unit processes, operational methods, and quality and yield of char on the basis of analysis and feedback of long-term operating data of present operating facilities and (2) securing stable char demands by linking with local industries such as thermal electric power companies, iron manufacturing plants, and cement production plants.     

The use of volcanic soil as mineral landfill liner--III. Heavy metals retention capacity.

The volcanic soil of Southern Chile was tested for its heavy metal retention capacity. The maximum uptakes for CrO4(2-) (CrVI), Cu(2+), Zn(2+) and Pb(2+) were determined to be 2.74, 5.32, 5.86 and 7.44 mg g(-1), respectively. At a slightly alkaline pH value (7.5), it seems that a precipitation-adsorption process was responsible for the Cu(2+) and Zn(2+) uptake onto volcanic soil. All the determined values are of the same order of magnitude as natural zeolites heavy metals adsorption capacities. In addition, the heavy metals diffusion model through a 1 m volcanic soil mineral liner shows breakthrough times of 21.6, 10.2 and 8.9 years, for Pb(2+), Zn(2+) and Cu(2+), respectively, confirming the trend obtained in the adsorption isotherms. The natural volcanic soil of Southern Chile is an interesting material for possible use as landfill mineral basal sealing. It has an appropriate sealing potential (average Kf value of 5.85 x 10(-9) m s(-1)) and a heavy metals retention capacity comparable with natural zeolites. About two-thirds of the agricultural land in Chile (approximately 0.4 million km2) is derived from volcanic ash, suggesting an important soil volume for future landfill projects, that could be obtained in sufficient quantities from urban building activities.     

Modeling the energy content of combustible ship-scrapping waste at Alang-Sosiya, India, using multiple regression analysis

Alang-Sosiya is the largest ship-scrapping yard in the world, established in 1982. Every year an average of 171 ships having a mean weight of 2.10 x 10(6)(+/-7.82 x 10(5)) of light dead weight tonnage (LDT) being scrapped. Apart from scrapped metals, this yard generates a massive amount of combustible solid waste in the form of waste wood, plastic, insulation material, paper, glass wool, thermocol pieces (polyurethane foam material), sponge, oiled rope, cotton waste, rubber, etc. In this study multiple regression analysis was used to develop predictive models for energy content of combustible ship-scrapping solid wastes. The scope of work comprised qualitative and quantitative estimation of solid waste samples and performing a sequential selection procedure for isolating variables. Three regression models were developed to correlate the energy content (net calorific values (LHV)) with variables derived from material composition, proximate and ultimate analyses. The performance of these models for this particular waste complies well with the equations developed by other researchers (Dulong, Steuer, Scheurer-Kestner and Bento's) for estimating energy content of municipal solid waste.     

Review on the innovative uses of steel slag for waste minimization

Piles of steel slag, a solid waste generated from the iron and steel industry, could be seen due to no utility found for the past century. Steel slag has now gained much attention because of its new applications. The properties of slag greatly influence its use and thus had got varied applications. The chemical composition of steel slag varies as the mineral composition of raw material such as iron ore and limestone varies. This paper reviews the characteristics of steel slag and its usage. The paper reviews recent developments in well-known applications to the steel slag such as aggregate in bituminous mixes, cement ingredient, concrete aggregate, antiskid aggregate, and rail road ballast. This paper also reviews novel uses such as mechanomutable asphalt binders, building material, green artificial reefs, thermal insulator, catalyst and ceramic Ingredient. The review is also done on utilization of solid waste for waste management by the novel methods like landfill daily cover material, sand capping, carbon sequestration, water treatment and solid waste management. Review also shows recovery of pure calcium carbonate and heavy metals from slag, providing opportunity for revenue generation. Steel slag once traded as free to use by steel industries is now sold in the market at some price. Its utilization is of great economic significance as it also contributes to the reduction of solid waste.     

Effect of sintering temperature on the properties and leaching of incinerator bottom ash.

The fine particle size fraction of municipal solid waste incinerator bottom ash is often problematic because reuse applications for this material are limited. In these experiments incinerator bottom ash with a particle size of less than 8 mm was processed using conventional ceramic production techniques involving wet milling, drying, compacting and sintering. The effect of sintering temperature on the sintered density, microstructure, acid neutralization capacity (ANC) and the release of metal ions as a function of leachate pH are reported. Sintering at 1080 degrees C produced samples with maximum density. This material contained diopside (CaMgSi2O6), clinoenstatite (Mg2Si2O6) and wollastonite (CaSiO3) as the major crystalline phases. The acid neutralization capacity of sintered samples is significantly lower than milled bottom ash, and further reduces as the sintering temperature increases. This is associated with reduced leaching of Ca from sintered ash samples under all leachate pH conditions. Heavy metals present in the incinerator bottom ash included Cr, Cu, Ni, Zn, Cd and Pb. Sintering under optimum conditions reduced the leachable fraction of these metals under aggressive acid conditions (leachate pH 3) by factors ranging from 90% for Ni to greater than 99% for Cr, Cd, Zn and Pb.     

聚苯乙烯泡沫资源化关键技术研究

介绍了废旧聚苯乙烯（PS）泡沫塑料的回收概况、来源与分类、回收工艺和方法、回收技术瓶颈,重点讨论了熔融造粒法回收和改性废旧聚苯乙烯（Ps）泡沫塑料的工艺与进展,不同造粒回收工艺适合的原料种类,资源化利用的方向等,并对不同回收工艺的聚苯乙烯粒子性能作出了比较。     

The use of volcanic soil as mineral landfill liner--I. Physicochemical characterization and comparison with zeolites.

The main physicochemical characteristics of the volcanic soil of Southern Chile, with allophane as the main pedogenic mineral phase were analysed and compared with common zeolites (clinoptilolite) of the European market. The ultimate goal of this study was to test volcanic soil for the use as mineral landfill liner. The main results indicated that the clay and silt fractions together of the volcanic soil were between 38 and 54%. The buffering capacity of the volcanic soil was higher compared with the studied zeolites, whereas the cationic exchange capacity of the volcanic soil (between 5.2 and 6.5 cmol + kg(-1)) is of the same order of magnitude of the studied zeolites (between 9.7 and 11.4 cmol + kg(-1)). Moreover, the anionic exchange capacity of the volcanic soil was higher compared to the zeolites analysed. The hydraulic conductivity of the volcanic soil, measured in the laboratory at maximum proctor density, ranges between 5.16 x 10(-9) and 6.48 x 10(-9) m s(-1), a range that is comparable to the value of 4.51 x 10(-9) m s(-1) of the studied zeolite. The Proctor densities of the volcanic soil are in a lower range (between 1.11 and 1.15 g ml(-1)) compared with zeolites (between 1.19 and 1.34 g ml(-1)). The volcanic soil physicochemical characteristics are comparable to all the requirements established in the Austrian landfill directive (DVO, 2000). Therefore, the use as mineral landfill basal sealing of the analysed volcanic soil appears reasonable, having a pollutant adsorption capacity comparable to zeolites. It is of special interest for Southern Chile, because there are no alternative mineral raw materials for basal liners of landfills.     

Utilization of kaolin processing waste for the production of porous ceramic bodies

The kaolin processing industry generates large amounts of waste in producing countries such as Brazil. The aim of this study was to characterize kaolin processing waste and evaluate its suitability as an alternative ceramic raw material for the production of porous technical ceramic bodies. The waste material was physically and chemically characterized and its thermal behaviour is described. Several formulations were prepared and sintered at different temperatures. The sintered samples were characterized to determine their porosity, water absorption, firing shrinkage and mechanical strength. Fired samples were microstructurally analysed by X-ray diffraction and scanning electron microscopy. The results indicated that the waste consisted of quartz, kaolinite, and mica, and that ceramic formulations containing up to 66% of waste can be used for the production of ceramics with porosities higher than 40% and strength of about 70 MPa.     

Stabilisation of biodried municipal solid waste fine fraction in landfill bioreactor

The biodrying process of solid waste is a pre-treatment for the bio-stabilisation of the municipal solid waste. This study aims to investigate the fate of the municipal solid waste fine fraction (MSWFF) resulting from a biodrying treatment when disposed in landfills that are operated as bioreactors. Biodried MSWFF was apparently stable due to its low moisture content that slows down the microbial activity. The lab-scale anaerobic bioreactors demonstrated that a proper moisture content leads to a complete biodegradation of the organic matter contained in the biodried MSWFF. Using a pilot-scale landfill bioreactor (LBR), MSWFF stabilisation was achieved, suggesting that the leachate recirculation could be an effective approach to accomplish the anaerobic biodegradation and biostabilisation of biodried MSWFF after landfilling. The biostabilisation of the material resulting from the LBR treatment was confirmed using anaerobic and aerobic stability indices. All anaerobic and aerobic indices showed a stability increase of approximately 80% of the MSWFF after treatment in the LBR. The similar values of OD7 and BMP stability indices well agree with the relationship between the aerobic and anaerobic indices reported in literature.     

Characterisation of major component leaching and buffering capacity of RDF incineration and gasification bottom ash in relation to reuse or disposal scenarios

Thermal treatment of refuse derived fuel (RDF) in waste-to-energy (WtE) plants is considered a promising solution to reduce waste volumes for disposal, while improving material and energy recovery from waste. Incineration is commonly applied for the energetic valorisation of RDF, although RDF gasification has also gained acceptance in recent years. In this study we focused on the environmental properties of bottom ash (BA) from an RDF incineration (RDF-I, operating temperature 850-1000 °C) and a RDF gasification plant (RDF-G, operating temperature 1200-1400 °C), by evaluating the total composition, mineralogy, buffering capacity, leaching behaviour (both at the material’s own pH and as a function of pH) of both types of slag. In addition, buffering capacity results and pH-dependence leaching concentrations of major components obtained for both types of BA were analysed by geochemical modelling. Experimental results showed that the total content of major components for the two types of BA was fairly similar and possibly related to the characteristics of the RDF feedstock. However, significant differences in the contents of trace metals and salts were observed for the two BA samples as a result of the different operating conditions (i.e. temperature) adopted by the two RDF thermal treatment plants. Mineralogy analysis showed in fact that the RDF-I slag consisted of an assemblage of several crystalline phases while the RDF-G slag was mainly made up by amorphous glassy phases. The leached concentrations of major components (e.g. Ca, Si) at the natural pH of each type of slag did not reflect their total contents as a result of the partial solubility of the minerals in which these components were chemically bound. In addition, comparison of total contents with leached concentrations of minor elements (e.g. Pb, Cu) showed no obvious relationship for the two types of BA. According to the compliance leaching test results, the RDF-G BA would meet the limits of the Italian legislation for reuse and the European acceptance criteria for inert waste landfilling. RDF-I BA instead would meet the European acceptance criteria for non hazardous waste landfilling. A new geochemical modelling approach was followed in order to predict the leaching behaviour of major components and the pH buffering capacity of the two types of slags on the basis of independent mineralogical information obtained by XRD analysis and the bulk composition of the slag. It was found that the combined use of data regarding the mineralogical characterization and the buffering capacity of the slag material can provide an independent estimate of both the identity and the amount of minerals that contribute to the leaching process. This new modelling approach suggests that only a limited amount of the mineral phases that control the pH, buffering capacity and major component leaching from the solid samples is available for leaching, at least on the time scale of the applied standard leaching tests. As such, the presented approach can contribute to gain insights for the identification of the types and amounts of minerals that control the leaching properties and pH buffering capacity of solid residues such as RDF incineration and gasification bottom ash.     

Spectral cullet classification in the mid-infrared field for ceramic glass contaminants detection.

The presence of glass-like contaminants inside waste glass products, usually resulting from both industrial and differentiated urban waste collection, has greatly increased in recent years, due to the introduction to the market of a large amount of goods manufactured from ceramic glass. The presence of contaminants in the glass recycling streams reduces product quality and increases production costs. The detection of ceramic glass detection is an unresolved problem, as such material looks like normal glass and can only be detected by trained personnel. In this study an innovative approach to ceramic glass recognition, based on the spectral signature in the mid-infrared (MIR) field, was proposed and investigated. The study specifically addressed the spectral characterization of glass and ceramic glass fragments collected in a real recycling plant from two different production lines: coloured container glass and white container glass. To define suitable inspection strategies to separate the useful (glass) from the polluting (ceramic glass) materials at the recycling plants, fragments presenting different colour, thickness, size, shape and manufacturing were selected. Both dirty and clean cullet was considered. The analyses, carried out in the MIR spectral field (2280-4480 nm), show that ceramic glass and glass fragments can be recognized according to their different spectral signature. In particular, by selecting a specific wavelength ratio the two classes of materials can be rapidly recognized, suggesting the possibility of developing an integrated hardware and software sorting system for 'on-line' ceramic glass separation.     

Treatment of a high-strength sulphate-rich alkaline leachate using an anaerobic filter

The research looks at the feasibility of treating an alkaline sulphate-rich leachate arising from the co-disposal of municipal solid waste with cement kiln dust by means of an anaerobic filter (AF). This type of leachate with a high sulphate concentration is commonly prohibited for discharge to sewer and requires an on-site treatment solution. The AF used had a working volume of 4l and contained reticulated polyurethane foam as the biomass support material. The filters were operated over a 152 day experimental period during which the COD loading onto the filter was increased from 0.76 to 7.63kgCODm(-3)d(-1). In the early stages of operation at low loading, soluble sulphides accumulated that inhibited methanogenic activity. This was restored by dosing FeCl(3) to the reactor. The continued dosing allowed efficient COD removal of between 75% and 90% until the nominal retention time in the reactor was 3 days, at which point reactor performance declined significantly. The main mechanism for COD removal was by sulphate-reducing bacteria, which also resulted in up to 88% sulphate removal from the leachate. The average methane generation rate was 0.10lg(-1) COD removed. The results indicate the potential for using this approach as a pre-treatment that could significantly reduce the COD load to a second stage treatment process, but problems associated with the implementation of the technology at a larger scale have been identified.     

Production of lightweight aggregate from industrial waste and carbon dioxide

The concomitant recycling of waste and carbon dioxide emissions is the subject of developing technology designed to close the industrial process loop and facilitate the bulk-re-use of waste in, for example, construction. The present work discusses a treatment step that employs accelerated carbonation to convert gaseous carbon dioxide into solid calcium carbonate through a reaction with industrial thermal residues. Treatment by accelerated carbonation enabled a synthetic aggregate to be made from thermal residues and waste quarry fines. The aggregates produced had a bulk density below 1000 kg/m³ and a high water absorption capacity. Aggregate crushing strengths were between 30% and 90% stronger than the proprietary lightweight expanded clay aggregate available in the UK. Cast concrete blocks containing the carbonated aggregate achieve compressive strengths of 24 MPa, making them suitable for use with concrete exposed to non-aggressive service environments. The energy intensive firing and sintering processes traditionally required to produce lightweight aggregates can now be augmented by a cold-bonding, low energy method that contributes to the reduction of green house gases to the atmosphere.     

Modeling of urban solid waste management system: the case of Dhaka city

This paper presents a system dynamics computer model to predict solid waste generation, collection capacity and electricity generation from solid waste and to assess the needs for waste management of the urban city of Dhaka, Bangladesh. Simulated results show that solid waste generation, collection capacity and electricity generation potential from solid waste increase with time. Population, uncleared waste, untreated waste, composite index and public concern are projected to increase with time for Dhaka city. Simulated results also show that increasing the budget for collection capacity alone does not improve environmental quality; rather an increased budget is required for both collection and treatment of solid wastes of Dhaka city. Finally, this model can be used as a computer laboratory for urban solid waste management (USWM) policy analysis.     

阴极射线管锥玻璃碱性浸出渣制备泡沫玻璃

以废弃的阴极射线管锥玻璃碱性浸出渣及屏玻璃混合粉末为原料烧制泡沫玻璃。考察了发泡温度、屏玻璃加入量、发泡剂种类、发泡剂加入量、稳泡剂添加量对所制备的泡沫玻璃密度及抗压强度的影响。实验结果表明：在发泡温度800 ℃、屏玻璃加入量50%（w）、稳泡剂硼酸加入量5%（以锥玻璃碱性浸出渣及屏玻璃粉末总质量为基准,下同）、发泡剂SiC加入量15%最佳条件下烧制的泡沫玻璃密度达417 kg/m³,抗压强度达1.09 MPa,可满足建筑用泡沫玻璃的Ⅳ型物理性能指标。本实验烧制的泡沫玻璃的Pb浸出量为1.27 mg/L,Ba浸出量为0.06 mg/L,均满足固体废物的浸出毒性标准。     

The effect of storage and mechanical pretreatment on the biological stability of municipal solid wastes

Modern mechanical–biological waste treatment plants for the stabilization of both the source-separated organic fraction of municipal solid wastes (OFMSW) and the mixed stream of municipal solid wastes (MSW) include a mechanical pretreatment step to separate recyclable materials such as plastics, glass or metals, before biological treatment of the resulting organic material. In this work, the role of storage and mechanical pretreatment steps in the stabilization of organic matter has been studied by means of respiration techniques. Results have shown that a progressive stabilization of organic matter occurs during the pretreatment of the source-separated OFMSW, which is approximately 30% measured by the dynamic respiration index. In the case of mixed MSW, the stabilization occurring during the reception and storage of MSW is compensated by the effect of concentration of organic matter that the pretreatment step provokes on this material. Both results are crucial for the operation of the succeeding biological process. Finally, respiration indices have been shown to be suitable for the monitoring of the pretreatment steps in mechanical–biological waste treatment plants, with a strong positive correlation between the dynamic respiration index and the cumulative respiration index across all samples tested.     

A New Type Synthetic Filter Material for Biofilter: Preparation and its Characteristic Analysis

In this study, a new type poly(vinyl alcohol)/peat composite bead is prepared and is shown suitable as a filter material for biofiltration. The optimal preparation condition is with the peat size of 16–35 mesh, the ratio of water to peat of 40g water/10 peat and the immersion time in the phosphate solution of 30min. The composite bead prepared by this process is a porous spherical particle with a density of 0.692 g/cm³. It contains phosphor and nitrogen nutrient are 2.91mg P/g dry solid and 3.25mg N/g dry solid, respectively. The diameter of composite bead is between 2.4 and 6.0mm and the average diameter is about 4.0mm. The equilibrium moisture content of the bead from adsorption and holding experiments are 50.5 and 66.8% on a wet basis, respectively, corresponding to the optimal filter material required and is sufficient to sustain biological activity as the bead adsorbs equilibrium moisture. The composite bead has higher moisture holding capacity and the compression strength than the pig manure compost filter material. The composite bead has buffer capacity and could maintain the filter bed at pH = 6.9–7.2 during the operation period. The percentage of removed ethyl acetate could stay at over 99% for 33 days operation while the composite bead adsorbed inorganic nitrate nutrient.     

Optimal design for sustainable development of a material recovery facility in a fast-growing urban setting

Installing material recovery facilities (MRFs) in a solid waste management system could be a feasible alternative to achieve sustainable development goals in urban areas if current household and curbside recycling cannot prove successful in the long run. This paper addresses the optimal site selection and capacity planning for a MRF in conjunction with an optimal shipping strategy of solid waste streams in a multi-district urban region. Screening of material recovery and disposal capacity alternatives can be achieved in terms of economic feasibility, technology limitation, recycling potential, and site availability. The optimization objectives include economic impacts characterized by recycling income and cost components for waste management, while the constraint set consists of mass balance, capacity limitation, recycling limitation, scale economy, conditionality, and relevant screening constraints. A case study for the City of San Antonio, Texas (USA) presents a vivid example where scenario planning demonstrates the robustness and flexibility of this modeling analysis. It proves especially useful when determining MRF ownership structure. Each scenario experiences two case settings: (1) two MRF sites are proposed for selection and (2) a single MRF site is sought. Cost analysis confirms processing fees are not the driving force in the City's operation, but rather shipping cost. Sensitivity analysis solidifies the notion that significant public participation plays the most important role in minimizing solid waste management expenses.