Atmospheric polycyclic aromatic hydrocarbons in an industrialized city, Kocaeli, Turkey: study of seasonal variations, influence of meteorological parameters and health risk estimation

Ambient gas and particle phase samples were collected during two sampling periods from a residential area of an industrialized city, Kocaeli, Turkey. The sampling occurred during winter months when structures were being heated, and summer months when structures were not being heated. Σ(13)PAH (gas + particle) concentrations ranged between 6.2 ng m(-3) (DahA) and 98.6 ng m(-3) (Phe) in the heating (winter) period and 3.0 ng m(-3) (BaA) and 35.1 ng m(-3) (Phe) in the non-heating (summer) period. Phe, Flt and Pyr were found to be at high concentrations in both sampling periods. Winter time to summer time concentration ratios for individual ambient PAH concentration ratios ranged between 1.2 (DahA) and 17.5 (Flu), indicating the effect of the emissions from residential heating on measured concentrations of PAHs, but great industrial plants and the only incinerator facility of Turkey are other important pollution sources around the city. Temperature dependence of gas phase PAHs was investigated using the Clausius-Clapeyron equation. A high slope obtained (5069.7) indicated the effect of the local sources on measured gas phase PAHs. Correlation of the supercooled vapor pressure (P) with the gas particle partitioning coefficient (K(p)) and particle phase fraction was also evaluated. The relationship between the meteorological parameters and individual PAH (gas + particle) concentrations was investigated further by multiple linear regression analysis. It was found that the temperature had a significant effect on all of the measured PAH concentrations, while the effects of the wind speed and direction were not significant on the individual PAHs. On the other hand, PAH concentrations showed a strong linear relationship with the ventilation coefficient (VC) which showed the influence of local sources on measured PAHs. Benzo[a]pyrene toxic equivalent (BaP(eq.)) concentrations were used for health risk assessment purposes. The winter period risk level (2.92 × 10(-3)) due to the respiratory exposure to PAHs was found to be almost 3 times higher than in the summer period (1.15 × 10(-3)).     

Contributions of deposited particles to pine needle polycyclic aromatic hydrocarbons

The contributions of deposited particles (P) to polycyclic aromatic hydrocarbon (PAH) levels in pine (Cedrus deodar) needles sampled from the Dalian region were evaluated by washing off the particles from pine needle surfaces. P values ranged from 4.4 +/- 2.2% for fluorene to 69.9 +/- 4.0% for indeno(1,2,3-cd)pyrene, and positively correlated with the logarithm of octanol-air partition coefficients (log K OA) of each PAH significantly. P and the total levels of 14 PAHs under study ( summation PAHs), that ranged from 490 to 3241 ng g(-1) dw (dry weight) with median value of 1521 ng g(-1) dw, were high for traffic areas, and low for residential or park areas, implying the significant contributions of PAHs in both gas and particle phases emitted by vehicles. However, PAH profiles in pine needles were not significantly altered by the washing, due to the low fractions (2-5%) of the 5- and 6-ring PAHs in summation PAHs. The high wind speed and frequently alternating wind directions in the Dalian spring could quicken the depuration processes of pine needle PAHs. Thus, the local meteorological conditions and source variations should be taken into account when using pine needles to implicate seasonal variations of atmospheric semi-volatile organic compounds.     

Atmospheric PAH concentrations in fine and coarse particles

Measurements of the urban air concentrations of PAHsassociated with PM2.5-fine and PM10-coarse particles inChicago on the campus of IIT were achieved using a UniversalAir Sampler. Short sampling time (12 hr) and high flowrates were used to measure the PAH concentrations in fineand coarse particles. Measured ambient concentrations ofPAHs were classified based on wind direction and backtrajectory calculations as Land and Lake samples.Differences in ambient concentrations of PAHs were observedbetween Land and Lake samples. Fine particle concentrationsvaried from 9.5 to 25.7 ng m^-3 and averaged18.2 ng m^-3 for the Land samples, while they ranged from4.2 to 31.5 ng m^-3 and averaged 13.4 ng m^-3 for the Lake samples. The measured PAH concentrationsin coarse particles varied from 6.2 to 22.1 ng m^-3 and averaged 12.9 ng m^-3 for the Land samples, andthey ranged from 2.4 to 13.0 ng m^-3 with an average value of 7.3 ng m^-3 for the Lake samples. The fine/coarse ratio of each individual PAH compound varied between1.3 and 2.7 for the Land samples; it varied between 1.6 and 4.2 for the Lake samples. There was an increase in the fine/coarse ratio of PAH as molecular weight of the compound increases for both Land and Lake samples.     

Polycyclic aromatic hydrocarbons in bulk PM2.5 and size-segregated aerosol particle samples measured in an urban environment

To analyze polycyclic aromatic hydrocarbons (PAHs) at an urban site in Seoul, South Korea, 24-hr ambient air PM_2.5 samples were collected during five intensive sampling periods between November 1998 and December 1999. To determine the PAH size distribution, 3-day size-segregated aerosol samples were also collected in December 1999. Concentrations of the 16 PAHs in the PM_2.5 particles ranged from 3.9 to 119.9 ng m⁻³ with a mean of 24.3 ng m⁻³.An exceptionally high concentration of PAHs(∼120 ng m⁻³) observed during a haze event in December 1999 was likely influenced more by diesel vehicle exhaust than by gasoline exhaust, as well as air stagnation, as evidenced by the low carbon monoxide/elemental carbon (CO/EC) ratio of 205 found in this study and results reported by previous studies. The total PAHs associated with the size-segregated particles showed unimodal distributions. Compared to the unimodal size distributions of PAHs with modal peaks at < 0.12 μm measured in highway tunnels in Los Angeles (Venkataraman and Friedlander, 1994), four- to six-ring PAHs in our study had unimodal size distributions, peaking at the larger size range of 0.28–0.53 μm, suggesting the coagulation of freshly emitted ultrafine particles during transport to the sampling site. Further, the fraction of PAHs associated with coarse particles(> 1.8 μm) increased as the molecular weight of the PAHs decreased due to volatilization of fine particles followed by condensation onto coarse particles.     

Source analysis of particulate matter associated polycyclic aromatic hydrocarbons (PAHs) in an industrial city in northeastern China

Particle-associated polycyclic aromatic hydrocarbon (PAH) concentrations were investigated at eight sampling sites during cold periods where heating is used (heating period) (February to March, 2005) and warm periods where heating is not required (non-heating periods) (August to September 2006) in the urban area of Anshan, an iron and steel city in northeastern China. Eleven PAH species were measured using GC-MS. The total average concentrations of PAHs ranged from 46.14 to 385.60 ng m(-3) in the heating period and from 5.28 to 146.40 ng m(-3) in the non-heating period. The lowest concentration of ∑PAHs was observed at Qianshan, a monitoring site far from the city and industrial area, and the highest concentration occurred in the site located at the factory area of Anshan Iron and Steel Incorporation. Moreover, ambient PAH profiles were studied and high molecular weight PAH (including 4-6 rings) species occurred in the high fractions. Toxic equivalent factors analysis gave the potential carcinogenic risks in Anshan. For the heating sampling period, BaP equivalent concentration is in the range of 41.98 to 220.83 ng m(-3), and 9.23 to 126.00 ng m(-3) for the non-heating sampling period. By diagnostic ratio analysis, traffic emission and combustion (coal or biomass) were potential sources for PAHs in Anshan. Finally, PCA results indicated the major sources were vehicle emission, steel industry emission, and coal combustion for both heating and non-heating seasons, which agreed with the results from the diagnostic ratio analysis.     

Particle release transport in Danshuei River estuarine system and adjacent coastal ocean: a modeling assessment

A three-dimensional hydrodynamic model was created to study the Danshuei River estuarine system and adjacent coastal ocean in Taiwan. The model was verified using measurements of the time-series water surface elevation, tidal current, and salinity from 1999. We conclude that our model is consistent with these observations. Our particle-tracking model was also used to explore the transport of particles released from the Hsin-Hai Bridge, an area that is heavily polluted. The results suggest that it takes a much longer time for the estuary to be flushed out under low freshwater discharge conditions than with high freshwater discharge. We conclude that the northeast and southwest winds minimally impact particle dispersion in the estuary. The particles fail to settle to the bottom in the absence of density-induced circulation. Our model was also used to simulate the ocean outfall at the Bali. Our experimental results suggest that the tidal current dominates the particle trajectories and influences the transport properties in the absence of a wind stress condition. The particles tend to move northeast or southwest along the coast when northeast or southwest winds prevail. Our data suggest that wind-driven currents and tidal currents play important roles in water movement as linked with ocean outfall in the context of the Danshuei River.     

Characterization of polycyclic aromatic hydrocarbons in fog-rain events

Atmospheric polycyclic aromatic hydrocarbons (PAHs) mainly originate from incomplete combustion or pyrolysis of materials containing carbon and hydrogen. They exist in gas and particle phases, as well as dissolved or suspended in precipitation (fog or rain). Current studies in atmospheric PAHs are predominantly focused on fog and rainwater samples. Some sampling difficulties are associated with fog samples. This study presented the first observation of the characteristics of PAHs in fog samples using a solid phase microextraction (SPME) technique. Eighteen fog samples were collected during ten fog events from March to December 2009 in the Shanghai area. PAHs were extracted by SPME and analyzed by gas chromatography-mass spectrometry (GC-MS). As the compounds were partially soluble in water, with solubility decreasing with increasing molecular weight, low molecular weight (LMW) PAH compounds were universally found in the fog water samples. Naphthalene (NaP), phenanthrene (Phe), anthracene (Ant) and fluoranthene (Flo) were dominant compounds in fog water. The total PAH concentration in fog water ranged from 0.03 to 6.67 μg L(-1) (mean of 1.06 μg L(-1)), and was much higher in winter than in summer. The concentration of PAHs in fog or rain water decreased after undergoing a pre-rain or pre-fog wash. The average concentration of PAHs was higher in fog than in rain. Diagnostic ratio analysis suggested that petroleum and combustion were the dominant contributors to PAHs in urban Shanghai. Backward trajectories were calculated to determine the origin of the air masses, showing that air masses were mostly from the northeast territory.     

The polycyclic aromatic hydrocarbon and geochemical biomarker composition of sediments from sea lochs on the west coast of Scotland

Sediments from twelve sea lochs on the west coast of Scotland were analysed for parent and branched 2- to 6-ring polycyclic aromatic hydrocarbons (PAHs), n-alkanes and geochemical biomarkers (triterpanes). Where possible at least fourteen sediment samples were collected at random from each sea loch. All sea lochs were remote, most had limited industrial and urban inputs, although all had fish farms. Four lochs had moderate total PAH concentrations and eight lochs had high total PAH concentrations. Total PAH concentration was related to organic carbon content and particle size distribution, with sandier sediments having lower PAH concentrations. The highest total PAH concentrations, normalised for organic carbon, were in Loch Linnhe and Ballachulish Bay (Loch Leven), close to an aluminium smelter. PAH concentration ratios showed that pyrolysis was the main source of PAHs in most lochs. Only sediments from Loch Clash showed evidence of petrogenic input based on their geochemical biomarker (triterpane and sterane) and n-alkane profiles. PAH profiles were similar across lochs apart from Loch Linnhe and Ballachulish Bay, which had a greater proportion of heavy parent PAHs. West coast sediments had a smaller proportion of heavy PAHs than sediments collected from voes in Shetland and a smaller proportion of alkylated PAHs relative to sediments collected from coastal waters around Orkney.     

Concentration, distribution and source apportionment of atmospheric polycyclic aromatic hydrocarbons in the southeast suburb of Beijing, China

Total suspended particle samples and gas phase samples were collected at three representative sampling sites in the southeastern suburb of Beijing from March 2005 to January 2006. The samples were analyzed for 16 US EPA priority PAHs using GC/MS. Concentrations of Sigma PAHs in particle and gas phases were 0.21-1.18 x 10(3) ng m(-3) and 9.5 x 10(2) ng-1.03 x 10(5) ng m(-3), respectively. PAH concentrations displayed seasonal variation in the order of winter>spring>autumn>summer for particle phase, and winter>autumn>summer>spring for gas phase. Partial correlation analysis indicates that PAH concentrations in particle phase are negatively correlated with temperature and positively correlated with air pollution index of SO(2). No significant correlation is observed between gas phase PAHs and the auxiliary parameters. Sources of PAH are identified through principal component analysis, and source contributions are estimated through multiple linear regression. Major sources of atmospheric PAHs in the study area include coal combustion, coke industry, vehicular emission and natural gas combustion.     

Relationship between different size classes of particulate matter and meteorology in three European cities

Evidence on the correlation between particle mass and (ultrafine) particle number concentrations is limited. Winter- and spring-time measurements of urban background air pollution were performed in Amsterdam (The Netherlands), Erfurt (Germany) and Helsinki (Finland), within the framework of the EU funded ULTRA study. Daily average concentrations of ambient particulate matter with a 50% cut off of 2.5 microm (PM2.5), total particle number concentrations and particle number concentrations in different size classes were collected at fixed monitoring sites. The aim of this paper is to assess differences in particle concentrations in several size classes across cities, the correlation between different particle fractions and to assess the differential impact of meteorological factors on their concentrations. The medians of ultrafine particle number concentrations were similar across the three cities (range 15.1 x 10(3)-18.3 x 10(3) counts cm(-3)). Within the ultrafine particle fraction, the sub fraction (10-30 nm) made a higher contribution to particle number concentrations in Erfurt than in Helsinki and Amsterdam. Larger differences across the cities were found for PM2.5(range 11-17 microg m(-3)). PM2.5 and ultrafine particle concentrations were weakly (Amsterdam, Helsinki) to moderately (Erfurt) correlated. The inconsistent correlation for PM2.5 and ultrafine particle concentrations between the three cities was partly explained by the larger impact of more local sources from the city on ultrafine particle concentrations than on PM2.5, suggesting that the upwind or downwind location of the measuring site in regard to potential particle sources has to be considered. Also, relationship with wind direction and meteorological data differed, suggesting that particle number and particle mass are two separate indicators of airborne particulate matter. Both decreased with increasing wind speed, but ultrafine particle number counts consistently decreased with increasing relative humidity, whereas PM2.5 increased with increasing barometric pressure. Within the ultrafine particle mode, nucleation mode (10-30 nm) and Aitken mode (30-100 nm) had distinctly different relationships with accumulation mode particles and weather conditions. Since the composition of these particle fractions also differs, it is of interest to test in future epidemiological studies whether they have different health effects.     

采样时间对ANDERSEN采样器采样效果的影响

在室内用ANDERSEN生物粒子采样器进行了不同采样时间对采集空气细菌和真菌粒子浓度，粒数中值直径效果的研究，结果表明，在1－12min内，采集的空气细菌和真菌粒子浓度随采样时间的增加而减少，呈明显的负相关关系，相关系数分别为－0．903和－0．688，P值均大于0．05，另外，在采样过程中，空气真菌比细菌耐受采样空气冲击力的能力强，采样时间对空气细菌和真菌粒子的粒度分布和粒数中值直径的影响不明显。     

Seasonal and spatial variation of Yamuna River water quality in Delhi, India

Street dust was collected from five roads with different traffic volumes in the metropolitan area of Beijing and separated into five size fractions. Concentrations of polycyclic aromatic hydrocarbons (PAHs) adsorbed on street dust in different size ranges and their correlation with specific surface area and total organic carbon (TOC) were investigated. Results show that the concentration of 16-PAHs of sieved samples ranges from 0.27 to 1.30 mg/kg for all the sampling sites. Particles smaller than 40 μm in diameter have the highest 16-PAHs concentration among all of the size ranges for street dust from the four sampling sites with vehicles running on. PAHs with three or four rings account for 68% of the overall 16-PAHs on average. Remarkable positive correlation exists between 16-PAHs concentration and specific surface area with R ² values from 0.7 to 0.96 for the four sampling sites with vehicles running on. The relationship between the concentration of 16-PAHs and TOC is less clear.     

Chemical and micromorphological properties of TSP and PM10 particles: case study in Bucharest urban area

The purpose of this work was to determine some aspects of micromorphology of total suspended particles (TSP) and particulate matter with aerodynamic diameter ≤10 μm (PM(10)) and their major elemental components in order to highlight the main characteristics of the atmospheric particles from an urban environment, having a case study in the urban area of Bucharest. The sampling of PM(10) and TSP were conducted in the close vicinity of a high traffic road for 72 h per sample and also priority pollutants in air: Pb and Cd were quantified and correlations between their concentrations and local wind directions were also found. The parameters characterizing the micromorphology of particle-roughness of the particle surface and area of particle-were correlated with wind direction.     

Transport,deposition and biodegradation of particle bound polycyclic aromatic hydrocarbons in a tidal basin of an industrial watershed

Polycylic aromatic hydrocarbons (PAHs) are commoncontaminants in industrial watersheds. Their origin,transport and fate are important to scientists,environmental managers and citizens. The Philadelphia NavalReserve Basin (RB) is a small semi-enclosed embayment nearthe confluence of the Schuylkill and Delaware Rivers inPennsylvania (USA). We conducted a study at this site todetermine the tidal flux of particles and particle-boundcontaminants associated with the RB. Particle traps wereplaced at the mouth and inside the RB and in the Schuylkilland Delaware Rivers. There was net particle deposition intothe RB, which was determined for three seasons. Spring andfall depositions were highest (1740 and 1230 kg ofparticles, respectively) while winter deposition wasinsignificant. PAH concentrations on settling particlesindicated a net deposition of 12.7 g PAH in fall and 2.1 gPAH in spring over one tidal cycle. There was nosignificant PAH deposition in the winter. Biodegradationrates, calculated from ¹⁴C-labeled PAH substratemineralization, could attenuate only about 0.25% of the PAHdeposited during a tidal cycle in fall. However, in thespring, biodegradation could be responsible for degrading50% of the settling PAHs. The RB appears to be a sink forPAHs in this watershed.     

Distributions, sources and risk assessment of polycyclic aromatic hydrocarbons (PAHs) in topsoil at Ji’nan city, China

Surface soil (0-5 cm) samples from 17 sampling sites including different functional areas at Ji'nan city in Shandong Province of China were collected and analyzed for 16 EPA priority polycyclic aromatic hydrocarbons (PAHs). The total PAH concentrations were in the range from 1.31 mg kg(-1) to 254.08 mg kg(-1) (dry weight), and the average level of total PAHs was 23.25 mg kg(-1). The highest total PAHs concentrations were found in steel and iron plant at industrial areas. The total PAHs concentrations in industrial areas were markedly higher than those in other different functional areas. According to comparing total PAHs concentration in Ji'nan city to that of other urban areas, it was found that total PAHs concentrations were 6 to 137 times higher than other areas because of some specific sampling sites such as steel and iron plant and one main roadside. The results showed that PAHs in topsoil of Ji'nan city were suffered from strong pyrogenic influence, especially in industrial areas. However about 52.9% soil samples were mainly originated from both pyrogenic and petrogenic mixed sources based on Flu/Pyr ratios and Phe/Ant ratios. Furthermore, It was found that all individual PAHs except Fle were significantly correlated (P < 0.01) with LMW, HMW, total PAHs and SOM, and individual PAHs except Fle in soils were significantly correlated (P < 0.01) with each other. The nemerow composite index to assess the environmental quality showed that the soil sample of steel and iron plant in industrial areas and one main roadside were heavy pollution of PAHs, and about 47% soil sampling sites were safety, about 53% soil sampling sites were got different grades of PAHs pollution.     

Description and evaluation of a sampling system for monitoring hydrocarbons in sediments

A composite random sampling design was used to estimate the concentrations of hydrocarbons in sediments from two near-shore areas of Scotland (Firth of Clyde and Firth of Forth). The aim of this work was to estimate a mean value for each parameter in these areas, and to determine whether this can be done with more thorough coverage (better representation), better precision and less variance at lower analytical cost through a composite random sampling scheme rather than a simple random sampling scheme, and thereby contribute to the re-design of the UK National Marine Monitoring Programme (NMMP), re-named the UK Clean Seas Environmental Monitoring Programme (CSEMP) in 2006. Samples were collected using a simple random sampling design during 2005. All sediment samples were analysed for their particle size distribution and total organic carbon (TOC). All sediments were analysed for polycyclic aromatic hydrocarbons (PAHs) and n-alkanes. The concentrations of PAHs and n-alkanes in the study areas are described, and sources of PAHs were investigated through the PAH distributions and n-alkane profiles. Individual sediment samples from each area were combined to give a series of composite sub-samples, each comprised of 5 individual sediment samples. These composite samples were re-analysed for the same parameters as the individual samples. Mean total PAH (2- to 6-ring parent and branched) concentrations, based on the individual original sediment samples collected through simple random sampling, were 1858 microg kg(-1) dry weight (SE = 196 microg kg(-1) dry weight, n = 25) and 532.4 microg kg(-1) dry weight (SE = 59 microg kg(-1) dry weight, n = 25) in the Clyde and Forth, respectively. Mean total PAH concentrations of the composite samples were 1745 microg kg(-1) dry weight (SE = 121.0 microg kg(-1) dry weight, n = 5) in the Clyde and 511.6 microg kg(-1) dry weight (SE = 37.4 microg kg(-1) dry weight, n = 5) in the Forth. No significant differences were found between the mean PAH concentrations from the two sampling designs. This study demonstrated that the composite random sampling design gave a mean value with less variance than the simple random sampling design, at significantly reduced analytical effort (and cost).     

Observations of urban airborne particle number concentrations during rush-hour conditions: analysis of the number based size distributions and modal parameters

A summertime study of the number concentration and the size distribution of combustion derived nanometre sized particles (termed nanoparticles) from diesel and spark-ignition (SI) engine emissions were made under rush-hour and free-flow traffic conditions at an urban roadside location in Leeds, UK in July 2003. The measured total particle number concentrations (N(TOTAL)) were of the order 1.8 x 10(4) to 3.4 x 10(4) cm(-3), and tended to follow the diurnal traffic flow patterns. The N(TOTAL) was dominated by particles < or =100 nm in diameter which accounted for between 89-93% of the measured particle number. By use of a log-normal fitting procedure, the modal parameters of the number based particle size distribution of urban airborne particulates were derived from the roadside measurements. Four component modes were identified. Two nucleation modes were found, with a smaller, more minor, mode composed principally of sub-11 nm particles, believed to be derived from particles formed from the nucleation of gaseous species in the atmosphere. A second mode, much larger in terms of number, was composed of particles within the size range of 10-20 nm. This second mode was believed to be principally derived from the condensation of the unburned fuel and lube oil (the solvent organic fraction or SOF) as it cooled on leaving the engine exhaust. Third and fourth modes were noted within the size ranges of 28-65 nm and 100-160 nm, respectively. The third mode was believed to be representative of internally mixed Aitken mode particles composed of a soot/ash core with an adsorbed layer of readily volatilisable material. The fourth mode was believed to be composed of chemically aged, secondary particles. The larger nucleation and Aitken modes accounted for between 80-90% of the measured N(TOTAL), and the particles in these modes were believed to be derived from SI and diesel engine emissions. The overall size distribution, particularly in modes II-IV, was observed to be strongly related to the number of primary particle emissions, with larger count median diameters observed under conditions where low numbers of primary soot based particles were present.     

东北地区城市大气颗粒物中多环芳烃的污染特征

2008年4月至2009年1月期间,在东北三省(辽宁、吉林、黑龙江)设立30个观测点位,研究了东北城市大气颗粒物中PAHs的浓度水平、分布及来源.结果表明,不同季节14种PAHs总浓度的变化范围是16.3 ～712.1 ng/m3,呈冬季高、夏季低的季节变化特征；PAHs组成以4～5环化合物为主,3～4环化合物受温度的影响较大,表现出较强的季节波动；8个城市中抚顺和吉林PAHs污染最重,城市不同功能区中以工业区污染较重；燃煤和机动车尾气是区域PAHs的主要来源.     

PAHs in soils and estimated air�Csoil exchange in the Pearl River Delta, South China

In this study, 74 soil samples collected from the Pearl River Delta were analyzed for polycyclic aromatic hydrocarbons (PAHs). The PAH mixture in the soils is mainly of low molecular weight compounds, with naphthalene (21.4%) and phenanthrene (21.8%) being dominant. Soil PAH levels from the Pearl River Delta are relatively low (28?C711 ng/g, averaged 192 ng/g) compared to those from urban soils in temperate regions. The mean concentration of ??PAHs generally decrease with increasing distance from the city center, with ??PAHs of paddy soils > crop soil > natural soil. PAHs in the air were measured during a year-round sampling campaign using semipermeable membrane devices, and the transfer of chemicals between the soil and air compartments were estimated. Soil?Cair fugacity quotient calculations showed a highly uncertain equilibrium position of PAHs, with net volatilization of naphthalene and fluorene, whereas net deposition of phenanthrene, fluoranthene, and pyrene, indicating a capacity for the air to supply the soil with more substances.     

Profile of PAHs in the inhalable particulate fraction: source apportionment and associated health risks in a tropical megacity

The present study proposed to investigate the atmospheric distribution, sources, and inhalation health risks of polycyclic aromatic hydrocarbons (PAHs) in a tropical megacity (Delhi, India). To this end, 16 US EPA priority PAHs were measured in the inhalable fraction of atmospheric particles (PM₁₀; aerodynamic diameter, ≤10 μm) collected weekly at three residential areas in Delhi from December 2008 to November 2009. Mean annual 24 h PM₁₀ levels at the sites (166.5–192.3 μg m^?3) were eight to ten times the WHO limit. Weekday/weekend effects on PM₁₀ and associated PAHs were investigated. Σ₁₆PAH concentrations (sum of 16 PAHs analyzed; overall annual mean, 105.3 ng m^?3; overall range, 10.5–511.9 ng m^?3) observed were at least an order of magnitude greater than values reported from European and US cities. Spatial variations in PAHs were influenced by nearness to traffic and thermal power plants while seasonal variation trends showed highest concentrations in winter. Associations between Σ₁₆PAHs and various meteorological parameters were investigated. The overall PAH profile was dominated by combustion-derived large-ring species (85–87 %) that were essentially local in origin. Carcinogenic PAHs contributed 58–62 % to Σ₁₆PAH loads at the sites. Molecular diagnostic ratios were used for preliminary assessment of PAH sources. Principal component analysis coupled with multiple linear regression-identified vehicular emissions as the predominant source (62–83 %), followed by coal combustion (18–19 %), residential fuel use (19 %), and industrial emissions (16 %). Spatio-temporal variations and time-evolution of source contributions were studied. Inhalation cancer risk assessment showed that a maximum of 39,780 excess cancer cases might occur due to lifetime inhalation exposure to the analyzed PAH concentrations.