Influence of regulation on the productivity of waste utilities. What can we learn with the Portuguese experience?

This paper examines the merits and the perverse effects of quality of service regulation in the performance of urban waste services when implemented alone and compares the performance of different economic regulatory methods. By means of a productivity analysis, we investigate the influence of a five-year period of regulation on the performance of Portuguese urban waste utilities using an unbalanced panel data for the period 2001-2008. Different non-parametric methods were applied to estimate the productivity change, all leading to similar outcomes. We observed a tendency of productivity decline in the urban waste utilities and concluded that in spite of the unequivocal improvements in the quality of service induced by sunshine regulation, more should be done as far as economic regulation is concerned. We also found that the use of sunshine regulation together with low incentive economic regulatory methods is not positive, leading to overinvestment rather than to value for money.     

The introduction of recycled-aggregate concrete specifications in Japan and the research into the freezing–thawing resistance of recycled-aggregate concrete

Journal of Material Cycles and Waste Management - In Japan, recycled concrete aggregate (RCA) and recycled-aggregate concrete (RAC) are standardized in the Japanese Industrial Standards (JIS) A...     

The Impact of the Macaíba Components Addition on the Biodegradation Acceleration of Poly (Ɛ-Caprolactone) (PCL)

Journal of Polymers and the Environment - Nowadays, there is a need to obtain eco-friendly materials, especially plastics that are responsible for most of the environmental pollution. In this...     

A Methodology to Identify the Releasing of the Amide-Containing β-Glucan from the Usnea Lichen: A Spectroscopic Study

Journal of Polymers and the Environment - Polymer fractions from a biological matrix have been well-characterized by vibrational spectroscopy, XPS, CP/MAS 13C NMR, MALDI-TOF mass...     

The Myth of the “Pristine Environment”: Past Human Impacts in Prince William Sound and the Northern Gulf of Alaska

The coastal region affected by the Exxon Valdez oil spill, although a beautiful and sensitive maritime wilderness with bountiful fish and wildlife, was not a pristine environment in 1989. Prior to the spill, Prince William Sound and the northern Gulf of Alaska region had experienced extensive human impacts from the commercial fur trade, commercial sea-mammal hunting, commercial fishing, logging, mining and introduced exotic species including foxes, Sitka black-tailed deer and hatchery-reared pink salmon. The spill occurred in a scenic area that was (and is) paradoxically both the source of subsistence food for local residents and the scene of extensive natural resource exploitation.Contrary to media sound bites and news headlines, the Exxon Valdez oil spill did not destroy a pristine wilderness. The Russian and American fur traders, commercial whalers and commercial fishermen, miners, loggers, fox farmers and military construction crews had transformed the region long before March 24, 1989. The Exxon Valdez spill was an important chapter in the history of human impacts to the area’s maritime ecosystem, but it was not, as many continue to claim, the mother of all environmental impacts in the region.     

Classification of the sugarcane residues and their characteristics—an environmental assessment of mortar with addition of sugarcane residues

Journal of Material Cycles and Waste Management - The use of agro-residue in resource-limited regions can be a smart way for civil construction to reduce costs, reduce emissions of pollutant gases...     

Chronic toxicity of the ‘water-soluble fraction’ of Norman Wells crude oil to juvenile fish

Young rainbow trout were exposed to Norman Wells crude oil for periods as long as 55 d. Mortality was light for the first few days, but it continued throughout exposure with more rapid and increased mortality at the higher exposure levels. The mortality was generally exacerbated by the presence of oil dispersants Corexit 7664 or 9600. Fish surviving the 55-day experiment showed severe fin erosion and apparent ‘flooding’, since mean body water content was increased from about 84% to over 90%. We hypothesize that the oil affected the ability of the fish to regulate their water content.     

Influence of Processing Additives on the Degradation of Melt-Pressed Films of Poly(ε-Caprolactone) and Poly(Lactic Acid)

Melt-pressed films of polycaprolactone (PCL) and poly(lactic acid) (PLA) with processing additives, CaCO₃, SiO₂, and erucamide, were subjected to pure fungal cultures Aspergillus fumigatus and Penicillium simplicissimum and to composting. The PCL films showed a rapid weight loss with a minor reduction in the molecular weight after 45 days in A. fumigatus. The addition of SiO₂ to PCL increased the rate of (bio)erosion in A. fumigatus and in compost. The use of a slip additive, erucamide, was shown to modify the properties of the film surface without decreasing the rate of bio(erosion). Both the rate of weight loss and the rate of molecular weight reduction of PCL increased with decreasing film thickness. The addition of CaCO₃ to PLA significantly reduced the thermal degradation during processing, but it also reduced the rate of the subsequent (bio)degradation in the pure fungal cultures. PLA without additives and PLA containing SiO₂ exhibited the fastest (bio)degradation, followed by PLA with CaCO₃. The degradation of the PLA films was initially governed by chemical hydrolysis, followed by an acceleration of the weight change and of the molecular weight reduction. PLA film subjected to composting exhibits a rapid decrease in molecular weight, which then remains unchanged during the measurement period, probably because of crystallization.     

Formation of Reactive Gaseous Mercury in the Arctic: Evidence of Oxidation of Hg° to Gas-Phase Hg-II Compounds after Arctic Sunrise

We have measured total gaseous mercury concentrations(Hg°) at Point Barrow, Alaska since September 1998 in aneffort to determine the geographic extent and reaction mechanismof the so-called mercury depletion events (MDE) previouslyreported in the high Arctic at Alert, Canada. Hg° has beensampled now for nearly 2 years at Barrow. In September, 1999, webegan making the first automated measurements of reactive gaseousmercury (RGM) attempted in the Arctic, along with measurements ofHg accumulation in snowpack to determine the fate of the depleted Hg°. During the fall and early winter, Hg°and RGM exhibit only minor variation, Hg° remaining within10% of global background, near 1.6–1.8 ng m^-3. The MDEperiods are quite different, however; within days of Arcticsunrise in January, Hg° exhibits major variations from themean, rapidly dropping as low as 0.05 ng m^-3 and then cyclingback to typical levels, sometimes exceeding global background. These events continue throughout Arctic spring, then end abruptlyfollowing snowmelt, in early June. Prior to Arctic sunrise, RGMremains near detection (<2 pg m^-3), but after sunriseincreases dramatically (to levels as high as 900 pg/m³) insynchrony with the depletion of Hg°. Both phenomenaexhibit a strong diel cycle, in parallel with UV-B. We concludethat MDE's involve rapid in-air oxidation of Hg° to aspecies of RGM by photochemically-driven reactions, probablyinvolving the same reactive bromine and chlorine compoundsinvolved in ozone destruction. Sharp increases in Hg in thesurface snowpack after sunrise coincident with periods of peakRGM suggest surface accumulation of the RGM by dry deposition.     

Effects of Poly(Ethylene Glycol) on the Production of Poly(β-Hydroxybutyrate) by Azotobacter vinelandii UWD

Azotobacter vinelandii UWD, ATCC 53799, an engineered strain derived from Azotobacter vinelandii UW was used in the poly(ethylene glycol) (PEG)-modulated synthesis of poly(-hydroxybutyrate) (PHB). To the best of our knowledge, this is the first report on modulating the production of PHB by amending the fermentation broth with PEG using A. vinelandii UWD. It was determined that A. vinelandii UWD is prone to back-mutation to the parent strain; hence fermentation experiments require the use of the antibiotic rifampicin. Diethylene glycol (DEG) and PEGs with molecular weights of 400, 2000, and 3400 Da and pentaerythritol ethoxylate (PEE) were used in the modulated fermentation experiments in a concentration of 2% (w/v). The molecular weight of the resulting polymers was reduced by up to 78%. No impact on the productivity of the strain was observed. Spectroscopic evidence showed that PEG-modulated synthesis resulted in the covalent attachment of the ethylene glycol moiety only when a small molecule, DEG, was used. PEGs had the same effects on the polymer formation in terms of molecular weight reduction as DEG, but no spectroscopic evidence was found for the formation of a covalent linkage between PHB and higher molecular weight PEGs.     

Waste incineration—An important element of the integrated waste management system in Germany

This paper describes the present situation of waste incineration in Europe and discusses the problems faced in the future when the Directives of the European Community will be implemented on waste management. As an example, the status of thermal waste treatment in Germany is dealt with in detail. A point addressed is that public acceptance of incineration can only be increased if the public is aware of the conditions governing waste avoidance and recycling and if these conditions are actually realized. This means, prior to incineration, recyclable or compostable materials should be separated, and only then can the remaining amounts of wastes be treated before being deposited. The main aim of the treatment process is to reduce the hazard potential posed by waste and to meet the landfill requirements laid down in the German Technical Instructions for Municipal Waste.     

Influence of Geometry on the Mean Flow within Urban Street Canyons – A Comparison of Wind Tunnel Experiments and Numerical Simulations

A comparison between numerical simulations and wind tunnel modelling has been performed to examine the variation with streamwise aspect ratio (width/height, W/H) of the mean flow patterns in a street canyon. For this purpose a two-dimensional (2-D) cavity was subjected to a thick turbulent boundary layer flow perpendicular to its principal axis. Five different test cases, W/H = 0.3, 0.5, 0.7, 1.0 and 2.0, have been studied experimentally with flow measurements taken using pulsed-wire anemometry. The results show that the skimming flow regime, with a large vortex in the canyon, occurred for all the cases investigated. For the cavities with W/H 0.7 a weaker secondary circulation developed beneath the main vortex. The narrower the canyon, the smaller the wind speed close to the cavity ground, giving increasingly poor ventilation qualities. The corresponding numerical results were obtained with the Computational Fluid Dynamics (CFD) code CHENSI that uses the standard k- model. The intercomparison showed good agreement in terms of the gross features of the mean flow for all the geometries examined, although some detailed differences were observed.     

The Effect of UV-B Irradiation on the Biodegradability of Poly-β-Hydroxybutyrate (PHB) and Poly-ɛ-Caprolactone (PCL)

The biodegradability of poly--hydroxybutyrate and poly--caprolactone in soil compostage before and after irradiation of the polymers for 192, 425, and 600 h in a Weather-Ometer was examined. The biodegradability tests were done in soil compostage at pH 7.0, 9.0, and 11.0 to assess the influence of this parameter on degradation. The rate of degradation was directly proportional to the soil alkalinity. Poly--hydroxybutyrate showed the greatest weight loss and aging in a Weather-Ometer did not significantly increase the biodegradation, except when the polymer was aged for 425 h and buried in soil compostage of pH 11.0.     

Dioxin emissions: Possible techniques for maintaining the limit of 0.1 ng TE m−3 (as of 1990/91)

Processes which will achieve up to 100-fold reduction of exhaust gas emissions of dioxin as proposed for the new German Standards are reviewed. A combination of processes which remove fly ash, NO_x, SO_x, HCl and other pollutants will also remove dioxins. Reduction of chlorinated compounds fed to the incinerator is not likely to make any significant difference. Good turbulence with elimination of cold spots in the firebox will ensure initial thermal destruction. Dioxins are synthesized on fly ash particles at temperatures between 200 and 400° C. Rapid temperature reduction across this range by water injection will greatly reduce dioxin levels. Catalytic inhibitors can also be used. Since dioxin is adsorbed on fly ash, efficient scrubbing is essential for high removal efficiency. Sorption on active carbon beds is also being evaluated.     

Treatment of organic-contaminated industrial wastes using cement-based stabilization/solidification—II. Microstructural analysis of the organophilic clay as a pre-solidification adsorbent

In the preceding paper detailed microstructural studies were presented of some fundamental aspects of the interactions of two organic compounds on a cement matrix. Organophilic clays are now attracting increasing attention as potential presolidification adsorbents to reduce adverse organic-cement interactions in solidification/stabilization (S/S) systems. This paper presents extensive microstructural studies of interactions between an organophilic clay, containing adsorbed organic wastes, and a cement matrix. Such interactions must be as fully understood as possible if the long-term integrity of the organophilic clay/cement mixes, in whatever formulation, is to be assured in S/S applications.A range of mixes was made up with the objective of characterizing the interaction of the organophilic clay with phenolic compounds and cement using microstructural methods. This approach was adopted in order to enable essential comparisons to be made between clay-containing and clay-free S/S mixes, using the same organics in both cases. Microstructural studies of organic-free cement/clay mixes showed that the presence of the clay caused an inhibition of the initial ettringite formation, up to seven days, but once ettringite had begun to form it increased to 140% of that in OPC paste at 28 days. Scanning electron microscopy (SEM) micrographs showed that the whole fracture surface was covered with a mat of needle shaped crystals approximately 1 μm in length. These results indicated that the incorporation of clay into the cement matrix may cause the strength reduction observed in macrostructural studies by altering the cement hydration reaction. Microstructural analysis of the solidified (post-adsorption) 3-chlorophenol showed that its detrimental effects on the cement hydration reaction were minimized, provided that the maximum adsorption capacity of the clay was not exceeded.     

Correction: Insight into the Adsorption Properties of Chitosan/Zeolite‑A Hybrid Structure for Effective Decontamination of Toxic Cd (II) and As (V) Ions from the Aqueous Environments

Journal of Polymers and the Environment -     

A method for the isolation of microorganisms producing extracellular long-side-chain poly (β-hydroxyalkanoate) depolymerase

A simple method was developed for the preparation of an autoclavable, long-side-chain poly (-hydroxyalkanoate) (LSC-PHA) colloidal suspension, which was used as a substrate for enzymatic degradation and to prepare agar overlay plates for the isolation of microorganisms producing extracellular LSC-PHA depolymerase. Six cultures producing extracellular LSC-PHA depolymerase were isolated from a composted hydrocarbon-contaminated soil. All were pseudomonads or related bacteria. All (with the possible exception ofXanthomonas maltophilia) could produce LSC PHA. Except forX. maltophilia none could hydrolyze poly (-hydroxybutyrate). Screening of sevenPseudomonas strains known to accumulate LSC PHA showed that all were negative for extracellular LSC-PHA depolymerase production. It was concluded that extracellular LSC-PHA depolymerase producers are found mostly in the genusPseudomonas but that they are relatively uncommon.     

How vital is the "lack of funding" in effective environmental management in Turkey?

The conflict experienced in Turkey between adequate legal and legislative arrangements with weak capabilities of policy implementation and enforcement is a typical scenario experienced in developing countries. The difficulties faced in environmental management is increased by funding issues. Although environmental management is directly influenced by problems associated with the distribution of public funds, lack of funding is not the sole reason responsible for the mismanagement of resources. The paper seeks to answer whether the lack of funding allocated to ameliorate environmental degradation and pollution is the main reason for an environmental crisis situation in Turkey. Turkey needs to ensure implementation of the basic obligations stated in its environmental policy with respect to national and international issues. Specific obstacles Turkey needs to overcome for more effective environmental management will be examined within this context.     

Risk assessment of an old landfill regarding the potential of gaseous emissions – A case study based on bioindication,FT-IR spectroscopy and thermal analysis

Risk assessment of two sections (I and II) of an old landfill (ALH) in Styria (Austria) in terms of reactivity of waste organic matter and the related potential of gaseous emissions was performed using conventional parameters and innovative tools to verify their effectiveness in practice. The ecological survey of the established vegetation at the landfill surface (plant sociological relevés) indicated no relevant emissions over a longer period of time. Statistical evaluation of conventional parameters reveals that dissolved organic carbon (DOC), respiration activity (RA₄), loss of ignition (LOI) and total inorganic carbon (TIC) mostly influence the variability of the gas generation sum (GS₂₁). According to Fourier Transform Infrared (FT-IR) spectral data and the results of the classification model the reactivity potential of the investigated sections is very low which is in accordance with the results of plant sociological relevés and biological tests. The interpretation of specific regions in the FT-IR spectra was changed and adapted to material characteristics. Contrary to mechanically–biologically treated (MBT) materials, where strong aliphatic methylene bands indicate reactivity, they are rather assigned to the CH vibrations of plastics in old landfill materials. This assumption was confirmed by thermal analysis and the characteristic heat flow profile of plastics containing landfill samples. Therefore organic carbon contents are relatively high compared to other stable landfills as shown by a prediction model for TOC contents based on heat flow profiles and partial least squares regression (PLS-R). The stability of the landfill samples, expressed by the relation of CO₂ release and enthalpies, was compared to unreactive landfills, archeological samples, earthlike materials and hardly degradable organic matter. Due to the material composition and the aging process the landfill samples are located between hardly degradable, but easily combustible materials and thermally resistant materials with acquired stability.