Integrated assessment of river health based on water quality, aquatic life and physical habitat

The health conditions of Liao River were assessed using 25 sampling sites in April 2005, with water quality index, biotic index and physical habitat quality index. Based on the method of cluster analysis (CA) for water quality indices, it revealed that heavily polluted sites of Liao River are located at estuary and mainstream. The aquatic species surveyed were attached algae and benthic invertebrates. The result showed that the diversity and biomass of attached algae and benthic index of biotic integrity (B-IBI) were degrading as the chemical and physical quality of water bodies deteriorating. Physiochemical parameters, BOD5, CODCr, TN, TP, NH3-N, DO, petroleum hydrocarbon and conductivity, were statistically analyzed with principal component analysis and correlation analysis. The statistical results were incorporated into the integrated assessing water quality index, combining fecal coliform count, attached algae diversity, B-IBI and physical habitat quality score. A comprehensive integrated assessing system of river ecological health was established. Based on the systimetic assesment, the assessed sites are categorized into 9 “healthy” and “sub-healthy” sites and 8 “sub-sick” and “sick” sites.     

New concepts in product use for sustainable consumption

The paper presents the main results of a recent study on sustainable use of products. It reveals that strategies of use intensification and useful life extension are environmentally beneficial. Moreover, analysis of household washing and winter sports illustrated that successful implementation of sustainable use patterns occurs as a shift of use regimes. Such regimes are the result of a complex interplay of supply and demand side factors, relationship among actors, technical trajectories, organisational structures etc. One decisive factor is the presence of strategic players, so called “change agents”. In addition, four user types have been identified in a representative survey (“ownership-oriented”, “open-minded”, “consumption-oriented”, “low interest”) to which use intensification and useful life extension can be targeted.     

Effect of components in activated sludge liquor on membrane fouling in a submerged membrane bioreactor

Introduction The membrane bioreactors (MBRs) have shown many advantages over conventional activated sludge processes, which apply membrane modules instead of the secondary settle tank to make a better separation of the solids and liquid and have been grea…     

Secondary organic carbon quantification and source apportionment of PM10 in Kaifeng, China

During 2005, the filter samples of ambient PM₁₀ from five sites and the source samples of particulate matter were collected in Kaifeng, Henan Province of China. Nineteen elements, water-soluble ions, total carbon (TC) and organic carbon (OC) contained in samples were analyzed. Seven contributive source types were identified and their contributions to ambient PM₁₀ were estimated by chemical mass balance (CMB) receptor model. Weak associations between the concentrations of organic carbon and element carbon (EC) were observed during the sampling periods, indicating that there was secondary organic aerosol pollution in the urban atmosphere. An indirect method of “OC/EC minimum ratio” was applied to estimate the concentration of secondary organic carbon (SOC). The results showed that SOC contributed 26.2%, 32.4% and 18.0% of TC in spring, summer-fall and winter, respectively, and the annual average SOC concentration was 7.07 μg/m³, accounting for 5.73% of the total mass in ambient PM₁₀. The carbon species concentrations in ambient PM₁₀ were recalculated by subtracting SOC concentrations from measured concentrations of TC and OC to increase the compatibility of source and receptor measurements for CMB model.     

Better regulation by new governance hybrids? Governance models and the reform of European chemicals policy

The EU is presently in a transition phase from environmental policy-making by law towards other governance approaches based upon networking, voluntary commitments, benchmarking and other forms of “soft law”. Those new governance approaches often claim to lead to “better regulation”, while adopting a more consensus-oriented and participatory style, taking economic aspects more seriously into account, allowing for more flexibility and autonomy for the private sector and Member States alike, mobilising a broader knowledge base or adopting more integrated and holistic approaches than previous sectoralised and compartmentalised policies.While the limitations of traditional regulatory approaches are widely accepted and cited, it is far from evident, that “new modes of governance” have greater capacity to solve problems than the old ones. There is an argument, that “better regulation” might by synonymous to a withdrawal and weakening of the regulatory state and hence effectively of the aspirations and objectives of environmental policies.An interesting case for an approach, combining the strengths of the old and the new approaches is the ongoing reform of chemicals policies. While some observers claim, that the proposed directive, “REACH” might belong to the outdated category of overcomplex and bureaucratic regulation, a closer look shows that there are many new forms of governance in REACH. This mixture or old and new may open a more realistic and promising perspective on the reform of European policy-making.In our paper we assess the effects and the interplay of the combination of different modes of governance using the example of REACH. We are particularly concerned with the question in how far the representation of interests may change when new modes of governance are introduced.     

Misdefining “climate change”: consequences for science and action

The restricted definition of “climate change” used by the Framework Convention on Climate Change (FCCC) has profoundly affected the science, politics, and policy processes associated with the international response to the climate issue. Specifically, the FCCC definition has contributed to the gridlock and ineffectiveness of the global response to the challenge of climate change. This paper argues that the consequences of misdefining “climate change” create a bias against adaptation policies and set the stage for the politicization of climate science. The paper discusses options for bringing science, policy and politics in line with a more appropriate definition of climate change such as the more comprehensive perspective used by the Intergovernmental Panel on Climate Change.     

Effect of biosurfactant on the sorption of phenanthrene onto original and H2O2-treated soils

The objective of this study was to examine the effect of biosurfactant on the sorption of phenanthrene (PHE) onto the original or H2O2-treated black loamy soil (typic isohumisols) and red sandy soil (typic ferralisols). The sorption isotherms were performed with the original and “soft” carbon-removed soils in the presence and absence of biosurfactant (200 mg/L). The sorption and degradation of biosurfactant were investigated. The result showed that organic matter played an important role in PHE sorption onto the black loamy and red sandy soils, and the PHE sorption isotherms on the “soft” carbon-removed soils exhibited more nonlinearity than those on the original soils. The values of partition coe cient (Kd) on the original black loamy soil with or without 200 mg/L biosurfactant were 181.6 and 494.5 mL/g, respectively. Correspondingly, in the red sandy soil, Kd was 246.4 and 212.8 mL/g in the presence or absence of biosurfactant, respectively. The changes of Kd suggested that biosurfactant inhibited PHE sorption onto the black loamy soil, but facilitated PHE sorption onto the red sandy soil. The nonlinearity of PHE sorption isotherm was decreased in the presence of biosurfactant. Site specific sorption might occur during PHE sorption onto both the original and the “soft” carbon-removed soils in the presence of biosurfactant. It was noted that biosurfactant could also be sorbed onto soils. The maximal sorption capacity of the red sandy soil for biosurfactant was (76.9 0.007) g/g, which was 1.31 times that of black loamy soil. Biosurfactant was degraded quickly in the two selected soils, and 92% of biosurfactant were mineralized throughout the incubation experiment for 7 d. It implied that biosurfactant should be added frequently when the remediation of polycyclic aromatic hydrocarbon (PAH)-contaminated soils was conducted through PAH desorption approach facilitated by biosurfactant.     

Human appropriation of net primary production as determinant of avifauna diversity in Austria

The relationship between land-use induced changes in production ecology and avifauna diversity was analysed using a GIS land cover dataset on a 0.25 km × 0.25 km grid covering Austria's national territory. Considering only aboveground processes, the “human appropriation of net primary production” (HANPP = potential NPP − NPP_t), actual NPP (NPP_act), harvest (NPP_h) and NPP_t (= NPP_act − harvest) were recalculated based on existing datasets. Elevation as well as indicators of land cover heterogeneity and landscape heterogeneity were also considered. Correlation analyses were performed between these potential determinants of avifauna diversity and breeding bird species richness data as well as the percentage of endangered breeding birds included in the Austrian red list. Four spatial scales—0.25 km × 0.25 km, 1 km × 1 km, 4 km × 4 km and 16 × 16 km, were analysed. It was shown that breeding bird species richness was more strongly correlated with production ecological indicators and elevation than with heterogeneity indicators. A residual analysis in which the effect of elevation (a proxy for climate) on species richness and its potential determinants was removed confirmed the importance of the availability of trophic energy (NPP) for bird diversity patterns. The results support the species-energy hypothesis, thus confirming the notion that HANPP could be a useful pressure indicator for biodiversity loss.     

Industrial symbiosis: the case for market coordination

Despite the fact that all successful, documented cases of industrial symbiosis to this day have been self-organizing, some authors and development officials have suggested that increased public planning might deliver better results in this respect than spontaneously evolved market coordination. This paper takes an historical approach to suggest that comprehensive planning is unlikely to live up to the expectations of its proponents.The essay is structured as follows. The first section provides short case studies of industrial symbiosis in highly different economic and institutional settings, the essentially free-market regime of Victorian England and communist Hungary (1948–1989). The available evidence suggests that market coordination proved much more favorable to the emergence of industrial symbiosis, despite the elaboration of a comprehensive policy to that effect in Hungary. Insights derived from the so-called “Austrian” critique of central planning are then used to explain this paradox. The analysis presented suggests that the Hungarian planners’ failure was not so much the result of the bad implementation of sound policies, but the logical outcome of a top-down approach’s shortcomings. Policy implications for the public planning of industrial symbiosis in a mixed economy are then derived and the case for self-organization is found more compelling. The creation of more innovative institutions that will force firms to “internalize their externalities” while leaving them the necessary freedom to innovate is viewed as an urgently needed and promising path towards increased, sustainable reuse of industrial by-products.     

Ingredients in sustainably managing water in semi-arid environments

The lessons learned from CALFED indicate that ingredients important in the long-term resolution of water management issues may not result in short-term “solutions”. The value of this special issue lies in its identification of ingredients that stimulate re-framing of issues, adapting to new knowledge and innovative decisions. But sustainable water management also requires the political patience to sustain those processes as a means of perpetuating the long-term decision-making necessary to anticipate and/or respond to an ever-changing environment.     

Analysing countries’ contribution to climate change: scientific and policy-related choices

This paper evaluates the influence of different policy-related and scientific choices on the calculated regional contributions to global climate change (the “Brazilian Proposal”). Policy-related choices include the time period of emissions, the mix of greenhouse gases and different indicators of climate change impacts. The scientific choices include historical emissions and model representations of the climate system. We generated and compared results of several simple climate models. We find that the relative contributions of different nations to global climate change—from emissions of greenhouse gases alone—are quite robust, despite the varying model complexity and differences in calculated absolute changes. For the default calculations, the average calculated contributions to the global mean surface temperature increase in 2000 are about 40% from OECD, 14% from Eastern Europe and Former Soviet Union, 24% from Asia and 22% from Africa and Latin America. Policy-related choices, such as time period of emissions, climate change indicator and gas mix generally have larger influence on the results than scientific choices. More specifically, choosing a later attribution start date (1990 instead of 1890) for historical emissions, decreases the contributions of regions that started emitting early, such as the OECD countries by 6 percentage points, whereas it increases the contribution of late emitters such as Asia by 8 percentage points. However, only including the fossil CO₂ emissions instead of the emissions of all Kyoto gases (fossil and land use change), increases the OECD contributions by 21 percentage points and decreases the contribution of Asia by 14 percentage points.     

Plans to distribute the next billion computers by 2015 creates lead pollution risk

Major computer and software companies, along with governments and philanthropic organizations have embarked on ambitious plans to put computers in the hands of more than one billion new computer users over the next five to six years in untapped markets in emerging economies. The most frequently proposed solution to overcome the electricity shortfall in communities where new computer users will be located is to use rechargeable lead-acid batteries to provide primary and back-up power for computers. This paper calculates the lead emissions from battery manufacturing and recycling that will result if independent market projections to greatly expand the number, geographic, and socioeconomic distribution of computer users are realized. By examining several possible scenarios, we estimate that between 1250 and 2300 kt of lead – between four and seven times the weight of the Empire State Building – could be released into the environment in the developing world to provide power to computers sold through 2015. Increased lead exposure has a negative impact on children's neurological development as measured by reduced school performance and on standardized tests. In order to realize the educational achievement and economic development benefits of reducing the “digital divide” proponents will need to encourage improvements in lead battery production and recycling in targeted markets.     

The role of social, political, and economic interests in promoting state green electricity policies

State governments in the United States have adopted a number of policies to encourage the production of electricity from “green” energy sources. While these state-level policies have been shown to stimulate green electricity development, the rate at which such policies have been adopted by the states differs significantly. This paper examines the potential influence of a state's particular social, political, and economic interests on its propensity to adopt green electricity policies. We use an empirical model that combines various social, political and economic indicators as explanatory variables of a state's likelihood to adopt four specific green electricity policies: renewable portfolio standards, net metering rules, public benefits funds, and generation disclosure rules. Using binary logistics regressions, the results suggest that social interests, measured by the level of income, the level of education, and the degree of participation in environmental lobbying groups, are positively linked to the adoption of green electricity policies. Similarly, political interests as measured by the pro-environment voting by states’ representatives in the U.S. Congress, also play a positive role in the adoption of such policies.     

Climate change and the geography of weed damage: Analysis of U.S. maize systems suggests the potential for significant range transformations

By the end of the century, climate change projections under a “business-as-usual” emissions scenario suggest a globally averaged warming of 2.4–6.4 °C. If these forecasts are realized, cropping systems are likely to experience significant geographic range transformations among damaging endemic weed species and new vulnerabilities to exotic weed invasions. To anticipate these changes and to devise management strategies for proactively addressing them, it is necessary to characterize the environmental conditions that make specific weed species abundant, competitive, and therefore damaging the production of particular crops (i.e. defining the damage niche). In this study, U.S. maize is used as a model system to explore the implications of climate change on the distribution of damaging agricultural weeds. To accomplish this, we couple ensemble climate change projections of annual temperature and precipitation with survey data of troublesome weed species in maize. At the state scale, space-for-time substitution techniques are used to suggest the potential magnitude of change among damaging weed communities. To explore how the geography of damage for specific species may evolve over the next century, bioclimatic range rules were derived for two weed species that are pervasive in the Northern (Abutilon theophrasti Medicus, ABUTH) and Southern (Sorghum halepense (L.) Pers., SORHA) U.S. Results from both analyses suggest that the composition of damaging weed communities may be fundamentally altered by climate change. In some states, potential changes in the coming decades are commensurate to those possible by the end of the century. Regions such as the Northeastern U.S. may prove particularly vulnerable with emerging climate conditions favoring few weed species of present-day significance. In contrast, regions like the mid-South are likely to experience fewer shifts even with a similar magnitude in climate change. By the end of the century in the U.S. Corn Belt, cold-tolerant species like A. theophrasti may be of minor importance whereas S. halepense, a predominantly Southern U.S. weed species at present, may become common and damaging to maize production with its damage niche advancing 200–600 km north of its present-day distribution.     

Regional eco-efficiency indicators – a participatory approach

Eco-efficiency emerged in the 1990s as a measure of “the efficiency with which ecological resources are used to meet human needs.” Eco-efficiency indicators as tools for regional sustainability policy were demonstrated in a Life-Environment project, ECOREG, in the Finnish region of Kymenlaakso. A participatory approach was utilised to produce indicators that are relevant for regional decision-makers and that will actually be used. The approach established a system through which decision-makers are able to monitor changes using several economic-environmental ratio indicators, and at the same time obtain information on the social progress taking place in the region. In the future, there will be a need for an ongoing dialogue among the different actors in the region in order to ensure that the indicators are indeed used to promote sustainable development.     

Applying ecosystem concepts to the planning of industrial areas: a case study of Singapore’s Jurong Island

The application of ecological concepts to the industrial setting has been touched upon by literature across several disciplines. Two emerging ecological planning approaches, landscape ecology and industrial ecology, are applied here to look at alternative ways of planning industrial parks. As an emerging field, landscape ecology provides different viewpoints from the traditional approach of natural conservation, which mainly focuses on the protection of nature. The approach of landscape ecology regards the environment as a land mosaic, a mixture of natural and urban environment, which concerns a manageable human-scale environment across one or two human generations. Industrial ecology, on the other hand, goes beyond the traditional “end of pipe” idea of pollution control and learns from the ecosystem concept. The current paper is an attempt to reconcile these two fields as an integrated approach to the planning of industrial areas. Using a case study of Singapore’s Jurong Island industrial park, two fundamental issues behind the idea of landscape ecology and industrial ecology are raised. If raw materials, energy and by-products are more easily replaced or reused by technology and management, then research on industrial ecology and related knowledge will be crucial for developing natural resource substitution by innovative technology and new ways of environmental management. Where it is difficult to substitute natural resources, the skills of planning and managing natural resources will take priority over other strategies. In this situation, the knowledge of landscape ecology needs to be applied to the prediction, design and evaluation of ecologically optimum resource uses, patterns and processes in the mixture of natural, urban and industrial environment. A new concept, “nurtured landscape”, is proposed for mediating between the natural ecosystem and the urban/industrial environment. The nurtured landscape provides a basis for the development of new ecological technology using landscape to ameliorate the polluting effects of the urban/industrial neighbourhood. The planning of Singapore’s Jurong Island industrial park provides a test of applying the principles of landscape ecology and industrial ecology to the possible transformation of an industrial area.     

Use of pheromone traps to suppress populations of Scolytus multistriatus (Marsham) (Coleoptera: Scolytidae) in three isolated communities of elms

The technique of mass trapping as a pest management tool was evaluated for its potential in reducing populations of Scolytus multistriatus. More than two million beetles were caught on traps baited with a synthetic attractant composed of both aggregation pheromones and host tree volatiles. Trends in trap catches over a period of 4 years (1976–1979) in three small isolated towns of similar size and with a similar number of elms, suggest that there was little or no reduction of the beetle population. Patterns in the number of beetles captured and the dispersion of trap catches indicate that pheromonebaited traps may be deployed to help identify local infestations and to focus sanitation efforts.     

Integrated environmental assessment and pollution prevention in Vietnam: the case of anthracite production

Using the concept of life cycle analysis, the whole life cycle of anthracite production in Vietnam was assessed and the environmental “hot-spots” were identified. These include (i) dust pollution at coal transfer points or piles in storage; (ii) noise pollution resulting from the usage of heavy equipment, and (iii) high volume of acid and turbid mine water discharged into the environment.Pollution prevention and treatment options were identified and discussed in this study which consists of wet treatment of dust, planning, collection and treatment of mine water, planting of trees for dust and noise reduction as well as minimization of erosion. Some recommendations are made for pollution abatement from coal production and improvement of anthracite production in the region.     

Agricultural intensification within agroforestry: The case of coffee and wood products

Compared to the environmental and conservation value as refuges for biodiversity, less is known about the social and economic value of shaded coffee systems. The agroforestry system can serve as a source of non-coffee products for diverse purposes. This study focuses on the role of shade trees in smallholder coffee farms, examining the wood products derived from the shaded coffee system. Data presented from surveys with 185 growers in Peru and 153 growers in Guatemala show that the consumption and sale of all non-coffee products account for a fifth to a third of the total value realized from the agroforestry system. Fuelwood and construction materials account for much of this value. Differences seen between countries can be traced to agricultural intensification – the degree to which the coffee agroforestry system is “technified” (i.e., managed with a reduced shade tree cover and diversity, high-yielding cultivars, agrochemical inputs, etc.) – as well as the relative demand for wood resources and farmers’ access to natural forest systems.     

ECO-design of reuse and recycling networks by multi-objective optimization

An ECO-optimized reuse of process liquors addresses the financial gain and the effective use of resources. In processes that have a potential for process liquor recovery, the minimization of both economic and environmental burdens can be realised by an ECO-optimal design of reuse and recycling network (RRN).In this paper, a procedure for synthesizing such an RRN for a metal finishing process is investigated. The simultaneous analysis of environmental impact sensitivity (SAEIS) based on a superstructure approach, combined with multi-objective optimization is performed by mixed-integer nonlinear programming (MINLP). This allows an “eco–eco” trade-off i.e. total annualized cost and environmental impacts are minimized simultaneously. By varying the weighting factor, different RRN alternatives were generated. A replacement of the standard and closed-loop system by these solutions, even for the environmentally friendliest case, yielded a reasonable cost saving on raw material's inputs.