PM2.5–10, PM2.5 and associated water-soluble inorganic species at a coastal urban site in the metropolitan region of Rio de Janeiro

The concentrations of PM_2.5−10, PM_2.5 and associated water-soluble inorganic species (WSIS) were determined in a coastal site of the metropolitan region of Rio de Janeiro, Southeastern Brazil, from October 1998 to September 1999 (n=50). Samples were dissolved in water and analyzed for major inorganic ions. The mean (± standard deviation; median) concentrations of PM_2.5−10 and PM_2.5 were, respectively, 26 (± 16; 21) μg m⁻³ and 17 (± 13; 14) μg m⁻³. Their mean concentrations were 1.7–1.8 times higher in dry season (May–October) than in rainy season (November–April). The WSIS comprised, respectively, 34% and 28% of the PM_2.5−10 and PM_2.5 masses. Chloride, Na⁺ and Mg²⁺ were the predominant ions in PM_2.5−10, indicating a significant influence of sea-salt aerosols. In PM_2.5, SO₄²⁻ (∼97% nss-SO₄²⁻) and NH₄⁺ were the most abundant ions and their equivalent concentration ratio (SO₄²⁻/NH₄⁺ ∼1.0) suggests that they were present as (NH₄)₂SO₄ particles. The mean concentration of (NH₄)₂SO₄ was 3.4 μg m⁻³. The mean equivalent PM_2.5 NO₃⁻ concentration was eight times smaller than those of SO₄²⁻ and NH₄⁺. The PM_2.5 NO₃⁻ concentration in dry season was three times higher than in rainy season, probably due to reaction of NaCl (sea salt) with HNO₃ as a result of higher levels of NO_y during the dry season and/or reduced volatilization of NH₄NO₃ due to lower wintertime temperature. Chloride depletion was observed in both size ranges, although more pronouncely in PM_2.5.     

Atmospheric concentrations of ammonia and ammonium at an agricultural site in the southeast United States

In this study, we present ∼1 yr (October 1998–September 1999) of 12-hour mean ammonia (NH₃), ammonium (NH₄⁺), hydrochloric acid (HCl), chloride (Cl⁻), nitrate (NO₃⁻), nitric acid (HNO₃), nitrous acid (HONO), sulfate (SO₄²⁻), and sulfur dioxide (SO₂) concentrations measured at an agricultural site in North Carolina's Coastal Plain region. Mean gas concentrations were 0.46, 1.21, 0.54, 5.55, and 4.15 μg m⁻³ for HCl, HNO₃, HONO, NH₃, and SO₂, respectively. Mean aerosol concentrations were 1.44, 1.23, 0.08, and 3.37 μg m⁻³ for NH₄⁺, NO₃⁻, Cl⁻, and SO₄²⁻, respectively. Ammonia, NH₄⁺, HNO₃, and SO₄²⁻ exhibit higher concentrations during the summer, while higher SO₂ concentrations occur during winter. A meteorology-based multivariate regression model using temperature, wind speed, and wind direction explains 76% of the variation in 12-hour mean NH₃ concentrations (n=601). Ammonia concentration increases exponentially with temperature, which explains the majority of variation (54%) in 12-hour mean NH₃ concentrations. Dependence of NH₃ concentration on wind direction suggests a local source influence. Ammonia accounts for >70% of NH_x (NH_x=NH₃+NH₄⁺) during all seasons. Ammonium nitrate and sulfate aerosol formation does not appear to be NH₃ limited. Sulfate is primarily associated ammonium sulfate, rather than bisulfate, except during the winter when the ratio of NO₃⁻–NH₄⁺ is ∼0.66. The annual average NO₃⁻–NH₄⁺ ratio is ∼0.25.     

Annual and seasonal trends in chemical composition of precipitation in Japan during 1989–1998

Annual and seasonal trends were discussed for precipitation chemistry in Japan on the basis of a nationwide monitoring network by Japan Environment Agency. For this analysis, 17 sites, selected from the 23 network sites after evaluation of data completeness for the present purpose, were grouped into four areas in terms of the sea which could characterize each area: the Pacific Ocean, the Japan Sea, the Seto Inland Sea and the East China Sea areas. Major ion concentrations at each site were subjected to least-squares multiple regression analysis, and discussion was principally focused on the area-groups. Each area showed significant (p<0.05) decreasing trends in non-sea-salt sulfate (nss-SO₄²⁻) concentrations with the annual mean change rate of −3.0% yr⁻¹, whereas no significant trends were detected for NO₃⁻ at 59% of the sites. Ammonium (NH₄⁺) showed significant increasing trends for 35%, and decreasing trends for 18% of the sites; and, the maximum change rate of 3.8% yr⁻¹ was recorded in the Pacific Ocean area. Non-sea-salt calcium (nss-Ca²⁺) concentrations significantly decreased in northern and some industrialized areas. Both the annual cycle-amplitudes and effects of precipitation amounts were significant for the four ions at almost all sites. The maximum concentrations of nss-SO₄²⁻ and -Ca²⁺ occurred from winter to spring at most sites. The seasons when the maximum concentrations of NO₃⁻ and NH₄⁺ occurred, were found to differ from area to area. Furthermore, the trends in precipitation nss-SO₄²⁻, and NO₃⁻ were qualitatively consistent with those of anthropogenic emissions of SO₂, and NO_x in Japan, respectively.     

Measurement and analysis of atmospheric ammonia emissions from anaerobic lagoons

Ammonia-nitrogen flux (NH₃-N=(14/17)NH₃) was determined from six anaerobic swine waste storage and treatment lagoons (primary, secondary, and tertiary) using the dynamic chamber system. Measurements occurred during the fall of 1998 through the early spring of 1999, and each lagoon was examined for approximately one week. Analysis of flux variation was made with respect to lagoon surface water temperature (∼15 cm below the surface), lagoon water pH, total aqueous phase NH_x(=NH₃+NH₄⁺) concentration, and total Kjeldahl nitrogen (TKN). Average lagoon temperatures (across all six lagoons) ranged from approximately 10.3 to 23.3^°C. The pH ranged in value from 6.8 to 8.1. Aqueous NH_x concentration ranged from 37 to 909 mg N l⁻¹, and TKN varied from 87 to 950 mg N l⁻¹. Fluxes were the largest at the primary lagoon in Kenansville, NC (March 1999) with an average value of 120.3 μg N m⁻² min⁻¹, and smallest at the tertiary lagoon in Rocky Mount, NC (November 1998) at 40.7 μg N m⁻² min⁻¹. Emission rates were found to be correlated with both surface lagoon water temperature and aqueous NH_x concentration. The NH₃-N flux may be modeled as ln(NH₃-N flux)=1.0788+0.0406T_L+0.0015([NH_x]) (R²=0.74), where NH₃-N flux is the ammonia flux from the lagoon surface in μg N m⁻² min⁻¹, T_L is the lagoon surface water temperature in ^°C, and [NH_x] is the total ammonia-nitrogen concentration in mg N l⁻¹.     

PM2.5 particles and size-segregated ionic species measured during fall season in three urban sites in Korea

Twelve hours integrated fine particles (PM_2.5) and 24-h average size-segregated particles were collected to investigate the chemical characteristics and to determine the size distribution of ionic species during October–December 1999 in three cities of different urban scale; Chongju, Kwangju, and Seoul, Korea. Concentrations of 5-min PM_2.5 black carbon (BC) and hourly criteria air pollutants (PM₁₀, CO, NO_x, SO₂, and O₃) were also measured using the Aethalometer and ambient air monitoring system, respectively.Highest PM_2.5 mass concentrations at Chongju, Kwangju, and Seoul sites were 63.0, 77.9, and 143.7 μg m⁻³, respectively. For the time period when highest PM_2.5 mass occurred, BC level out of PM_2.5 chemical species was highest at both Chongju and Kwangju, and highest NO₃⁻ (23.6 μg m⁻³) followed by BC (23.1 μg m⁻³) were observed at Seoul site, indicating that highest PM_2.5 pollution is closely associated with the traffic emissions. Strong relationships of Fe with BC and Zn at both Kwangju and Seoul sites support that the Fe and Zn measured there are originated partly from same source as BC, i.e. diesel traffics. However, it is suggested that the Fe measured at Chongju is most likely derived from dispersion of soil dust.The size distributions of SO₄²⁻, NO₃⁻, and NH₄⁺ ionic species indicated similar unimodal distributions at all sampling sites. However, different unimodal patterns in the accumulation mode size range with a peak in the smaller size (0.28–0.53 μm, condensation mode) in both Kwangju and Seoul, and in the relatively larger size (0.53–1.0 μm, droplet mode) in Chongju, were found. The potassium ion under the study sites dominates in the fine mode, and its size distribution showed unimodal character with a maximum in the size range 0.56–1.0 μm.     

Concentration-dependent NH3 deposition processes for mixed moorland semi-natural vegetation

Dry deposition modelling typically assumes that canopy resistance (R_c) is independent of ammonia (NH₃) concentration. An innovative flux chamber system was used to provide accurate continuous measurements of NH₃ deposition to a moorland composed of a mixture of Calluna vulgaris (L.) Hull, Eriophorum vaginatum L. and Sphagnum spp. Ammonia was applied at a wide range of concentrations (1–100 μg m⁻³). The physical and environmental properties and the testing of the chamber are described, as well as results for the moorland vegetation using the ‘canopy resistance’ and ‘canopy compensation point’ interpretations of the data.Results for moorland plant species demonstrate that NH₃ concentration directly affects the rate of NH₃ deposition to the vegetation canopy, with R_c and cuticular resistance (R_w) increasing with increasing NH₃ concentrations. Differences in R_c were found between night and day: during the night R_c increases from 17 s m⁻¹ at 10 μg m⁻³ to 95 s m⁻¹ at 80 μg m⁻³, whereas during the day R_c increases from 17 s m⁻¹ at 10 μg m⁻³ to 48 s m⁻¹ at 80 μg m⁻³. The lower resistance during the day is caused by the stomata being open and available as a deposition route to the plant. R_w increased with increasing NH₃ concentrations and was not significantly different between day and night (at 80 μg m⁻³ NH₃ day R_w=88 s m⁻¹ and night R_w=95 s m⁻¹). The results demonstrate that assessments using fixed R_c will over-estimate NH₃ deposition at high concentrations (over ∼15 μg m⁻³).     

Concentration-dependent NH3 deposition processes for moorland plant species with and without stomata

Currently, in operational modelling of NH₃ deposition a fixed value of canopy resistance (R_c) is generally applied, irrespective of the plant species and NH₃ concentration. This study determined the effect of NH₃ concentration on deposition processes to individual moorland species. An innovative flux chamber system was used to provide accurate continuous measurements of NH₃ deposition to Deschampsia cespitosa (L.) Beauv., Calluna vulgaris (L.) Hull, Eriophorum vaginatum L., Cladonia spp., Sphagnum spp., and Pleurozium schreberi (Brid.) Mitt. Measurements were conducted across a wide range of NH₃ concentrations (1–140 μg m⁻³).NH₃ concentration directly affects the deposition processes to the vegetation canopy, with R_c, and cuticular resistance (R_w) increasing with increasing NH₃ concentration, for all the species and vegetation communities tested. For example, the R_c for C. vulgaris increased from 14 s m⁻¹ at 2 μg m⁻³ to 112 s m⁻¹ at 80 μg m⁻³. Diurnal variations in NH₃ uptake were observed for higher plants, due to stomatal uptake; however, no diurnal variations were shown for non-stomatal plants. R_c for C. vulgaris at 80 μg m⁻³ was 66 and 112 s m⁻¹ during day and night, respectively. Differences were found in NH₃ deposition between plant species and vegetation communities: Sphagnum had the lowest R_c (3 s m⁻¹ at 2 μg m⁻³ to 23 at 80 μg m⁻³), and D. cespitosa had the highest nighttime value (18 s m⁻¹ at 2 μg m⁻³ to 197 s m⁻¹ at 80 μg m⁻³).     

Laboratory studies on the uptake of aromatic hydrocarbons by ice crystals during vapor depositional crystal growth

Uptake of aromatic hydrocarbons (AH) by ice crystals during vapor deposit growth was investigated in a walk-in cold chamber at temperatures of 242, 251, and 260 K, respectively. Ice crystals were grown from ambient air in the presence of gaseous AH namely: benzene (C₆H₆), toluene (methylbenzene, C₇H₈), the C₈H₁₀ isomers ethylbenzene, o-, m-, p-xylene (dimethylbenzenes), the C₉H₁₂ isomers n-propylbenzene, 4-ethyltoluene, 1,3,5-trimethylbenzene (1,3,5-TMB), 1,2,4-trimethylbenzene (1,2,4-TMB), 1,2,3-trimethylbenzene (1,2,3-TMB), and the C₁₀H₁₄ compound tert.-butylbenzene. Gas-phase concentrations calculated at 295 K were 10.3–20.8 μg m⁻³. Uptake of AH was detected by analyzing vapor deposited ice with a very sensitive method composed of solid-phase micro-extraction (SPME), followed by gas chromatography/mass spectrometry (GC/MS).Ice crystal size was lower than 1 cm. At water vapor extents of 5.8, 6.0 and 8.1 g m⁻³, ice crystal shape changed with decreasing temperatures from a column at a temperature of 260 K, to a plate at 251 K, and to a dendrite at 242 K. Experimentally observed ice growth rates were between 3.3 and 13.3×10⁻³ g s⁻¹ m⁻² and decreased at lower temperatures and lower value of water vapor concentration. Predicted growth rates were mostly slightly higher.Benzene, toluene, ethylbenzene, and xylenes (BTEX) were not detected in ice above their detection limits (DLs) of 25 pg g_ice⁻¹ (toluene, ethylbenzene, xylenes) and 125 pg g_ice⁻¹ (benzene) over the entire temperature range. Median concentrations of n-propylbenzene, 4-ethyltoluene, 1,3,5-TMB, tert.-butylbenzene, 1,2,4-TMB, and 1,2,3-TMB were between 4 and 176 pg g_ice⁻¹ at gas concentrations of 10.3–10.7 μg m⁻³ calculated at 295 K. Uptake coefficients (K) defined as the product of concentration of AH in ice and density of ice related to the product of their concentration in the gas phase and ice mass varied between 0.40 and 10.23. K increased with decreasing temperatures. Values of Gibbs energy (ΔG) were between −4.5 and 2.4 kJ mol⁻¹ and decreased as temperatures were lowered. From the uptake experiments, the uptake enthalpy (ΔH) could be determined between −70.6 and −33.9 kJ mol⁻¹. The uptake entropy (ΔS) was between −281.3 and −126.8 J mol⁻¹ K⁻¹. Values of ΔH and ΔS were rather similar for 4-ethlytoluene, 1,3,5-TMB and tert.-butylbenzene, whereas 1,2,3-TMB showed much higher values.     

Dry deposition of ammonia,nitric acid,ammonium, and nitrate to alpine tundra at Niwot Ridge,Colorado

Micrometeorological measurements and ambient air samples, analyzed for concentrations of NH₃, HNO₃, NH₄⁺, and NO₃⁻, were collected at an alpine tundra site on Niwot Ridge, Colorado. The measured concentrations were extremely low and ranged between 5 and 70 ng N m⁻³. Dry deposition fluxes of these atmospheric species were calculated using the micrometeorological gradient method. The calculated mean flux for NH₃ indicates a net deposition to the surface and indicates that NH₃ contributed significantly to the total N deposition to the tundra during the August–September measurement period. Our pre-measurement estimate of the compensation point for NH₃ in air above the tundra was 100–200 ng N m⁻³; thus, a net emission of NH₃ was expected given the low ambient concentrations of NH₃ observed. Based on our results, however, the NH₃ compensation point at this alpine tundra site appears to have been at or below about 20 ng N m⁻³. Large deposition velocities (>2 cm s⁻¹) were determined for nitrate and ammonium and may result from reactions with surface-derived aerosols.     

Ammonia fluxes and derived canopy compensation points over non-fertilized agricultural grassland in The Netherlands using the new gradient ammonia—high accuracy—monitor (GRAHAM)

During a measurement period from June till November 2004, ammonia fluxes above non-fertilized managed grassland in The Netherlands were measured with a Gradient Ammonia—High Accuracy—Monitor (GRAHAM). Compared with earlier ammonia measurement systems, the GRAHAM has higher accuracy and a quality control system.Flux measurements are presented for two different periods, i.e. a warm, dry summer period (from 18 July till 15 August) and a wet, cool autumn period (23 September till 23 October). From these measurements canopy compensation points were derived. The canopy compensation point is defined as the effective surface concentration of ammonia. In the summer period (negative) deposition fluxes are observed in the evening, night and early morning due to leaf surface wetness, while in the afternoon emission fluxes are observed due to high canopy compensation points. The mean NH₃-flux in this period was 4 ng m⁻² s⁻¹, which corresponds to a net emission of 0.10 kg N ha⁻¹ over the 28 day sampling period. The NH₃-flux in the autumn period mainly shows (negative) deposition fluxes due to small canopy compensation points caused by low temperatures and a generally wet surface. The mean NH₃-flux in this period is −24 ng m⁻² s⁻¹, which corresponds to a net deposition of 0.65 kg N ha⁻¹ over the 31 day sampling period.Frequency distributions of the NH₃-concentration and flux show that despite higher average ambient NH₃-concentrations (13.3 μg m⁻³ in the summer period vs. 6.4 μg m⁻³ in the autumn period) there are more emission events in the summer period than in the autumn period (about 50% of the time in summer vs. 20% in autumn). This is caused by the high canopy compensation points in summer due to high temperatures and a dry surface. In autumn, deposition dominates due to a generally wet surface that induces low canopy compensation points.For our non-fertilized agricultural grassland site, the derived canopy compensation points (at temperatures between 7 and 29 °C) varied from 0.5 to 29.7 μg m⁻³ and were on an average 7.0 μg m⁻³, which is quite high for non-fertilized conditions and probably caused by high nitrogen inputs in the past or high dry deposition amounts from local sources. The average value for the ratio between NH₄⁺ and H⁺ concentration in the canopy, Γ_c, that was derived from our data was 2200.     

Biogenic emission of dimethylsulfide (DMS) from the North Yellow Sea,China and its contribution to sulfate in aerosol during summer

Seawater, atmospheric dimethylsulfide (DMS) and aerosol compounds, potentially linked with DMS oxidation, such as methanesulfonic acid (MSA) and non-sea-salt sulfate (nss-SO₄^2?) were determined in the North Yellow Sea, China during July–August, 2006. The concentrations of seawater and atmospheric DMS ranged from 2.01 to 11.79 nmol l^?1 and from 1.68 to 8.26 nmol m^?3, with average values of 6.20 nmol l^?1 and 5.01 nmol m^?3, respectively. Owing to the appreciable concentration gradient, DMS accumulated in the surface water was transferred into the atmosphere, leading to a net sea-to-air flux of 6.87 μmol m^?2 d^?1 during summer. In the surface seawater, high DMS values corresponded well with the concurrent increases in chlorophyll a levels and a significant correlation was observed between integrated DMS and chlorophyll a concentrations. In addition, the concentrations of MSA and nss-SO₄^2? measured in the aerosol samples ranged from 0.012 to 0.079 μg m^?3 and from 3.82 to 11.72 μg m^?3, with average values of 0.039 and 7.40 μg m^?3, respectively. Based on the observed MSA, nss-SO₄^2? and their ratio, the relative biogenic sulfur contribution was estimated to range from 1.2% to 11.5%, implying the major contribution of anthropogenic source to sulfur budget in the study area.     

Nitric acid and the origin and size segregation of aerosol nitrate aloft during BRACE 2002

As part of the BRACE 2002 May field intensive, the NOAA Twin Otter flew 21 missions over terrestrial, marine, and mixed terrestrial and marine sites in the greater Tampa, Florida, airshed including over Tampa Bay and the Gulf of Mexico. Aerosols were collected with filter packs and their inorganic fractions analyzed post hoc with ion chromatography. Anion mass dominated both the fine- (particle diameters ⩽2.5 μm) and coarse-mode (particle diameters 10.0–2.5 μm) inorganic fractions: SO₄²⁻in the fine fraction, 3.7 μg m⁻³ on average and Cl⁻ and NO₃⁻ in the coarse fraction, 0.6 μg m⁻³ on average and 1.4 μg m⁻³ on average, respectively. Ammonium ion dominated the inorganic fine-mode cation mass, averaging 1.2 μg m⁻³, presumably in association with SO₄². Coarse-mode cation mass was dominated by Na⁺, but the concentrations of Ca²⁺ and K⁺ together often equaled or exceeded the Na⁺ mass which was, on average, 0.6 μg m⁻³. Nitrate appeared predominantly in the coarse rather than the fine fraction, as expected, and the fine fraction never contributed >15% of the total NO₃ concentration. Nitric acid dominated the NO₃⁻ contribution from both aerosol size fractions, and constituted at least 45% of the total NO₃ in all samples. Coarse-mode Cl⁻ depletion, and hence NO₃⁻ replacement, reached 100% within the first 4 h of plume travel from the urban core in some samples, although it was most often less than 100% and slightly below the expected 1:1 ratio with coarse-mode NO₃⁻ concentration: the slope of the regression line of NO₃⁻ concentration to Cl⁻ depletion was 0.9 in the coarse fraction. In addition, terrestrial samples were markedly lower in Cl⁻ depletion, and thus in substituted NO₃^–, than were marine and mixed samples: 15–25% depletion in terrestrial samples vs. 50–65% in marine samples with the same air mass age. Thus, we conclude that NO₃⁻ and its progenitor compound HNO₃ were present in the Tampa airshed in insufficient amounts to titrate fully the slightly alkaline coarse-mode particles there, and to replace completely the Cl⁻ from the coarse-mode NaCl.     

Ammonia concentrations and fluxes over a forest in the midwestern USA

We present measurements of ammonia (NH₃) over a deciduous forest in southern Indiana collected during four field campaigns; two in the spring during the transition to leaf-out and two during the winter. Above canopy NH₃ concentrations measured continuously using two Wet Effluent Diffusion Denuders indicate mean concentrations of 0.6–1.2 μg m⁻³ during the spring and 0.3 μg m⁻³ during the winter. Measurements suggest that on average the forest act as a sink of NH₃, with a representative daily deposition flux of 1.8 mg-NH₃ m⁻² during the spring. However, on some days during the spring inverted concentration gradients of NH₃ were observed resulting in an apparent upward flux of nearly 0.2 mg-NH₃ m⁻² h⁻¹. Analyses suggest that this apparent emission flux may be due to canopy emission but evaporation of ammonium nitrate particles may also be partly responsible for the observed inverted concentration gradients.     

The physical characteristics of sulfur aerosols

A review of the physical characteristics of sulfur-containing aerosols, with respect to size distribution of the physical distributions, sulfur distributions, distribution modal characteristics, nuclei formation rates, aerosol growth characteristics, and in situ measurement, has been made.Physical size distributions can be characterized well by a trimodal model consisting of three additive lognormal distributions.When atmospheric physical aerosol size distributions are characterized by the trimodal model, the following typical modal parameters are observed:1. Nuclei mode – geometric mean size by volume, DGV_n, from 0.015 to 0.04 μm. σ_gn=1.6, nucler mode volumes from 0.0005 over the remote oceans to 9 μm³ cm⁻³ on an urban freeway.2. Accumulation mode – geometric mean size by volume, DGV_a, from 0.15 to 0.5 μm, σ_ga=1.6–2.2 and mode volume concentrations from 1 for very clean marine or continental backgrounds to as high as 300 μm³ cm⁻³ under very polluted conditions in urban areas.3. Coarse particle mode – geometric mean size by volume, DGV_c, from 5 to 30 μm, σ_gn=2–3, and mode volume concentrations from 2 to 1000 μm³ cm⁻³.It has also been concluded that the fine particles (D_p<2 μm) are essentially independent in formation, transformation and removal from the coarse particles (D_p>2 μm).Modal characterization of impactor-measured sulfate size distributions from the literature shows that the sulfate is nearly all in the accumulation mode and has the same size distribution as the physical accumulation mode distribution.Average sulfate aerodynamic geometric mean dia. was found to be 0.48±0.1 μm (0.37±0.1 μm vol. dia.) and σ_g=2.00±0.29. Concentrations range from a low of about 0.04 μg m⁻³ over the remote oceans to over 8 μg m⁻³ under polluted conditions over the continents.Review of the data on nucleation in smog chambers and in the atmosphere suggests that when SO₂, is present, SO₂-to-aerosol conversion dominates the Aitken nuclei count and, indirectly, through coagulation and condensation, the accumulation mode size and concentration. There are indications that nucleation is ubiquitous in the atmosphere, ranging from values as low as 2 cm⁻³ h⁻¹ over the clean remote oceans to a high of 6×10⁶ cm⁻³ h⁻¹ in a power plant plume under sunny conditions.There is considerable theoretical and experimental evidence that even if most of the mass for the condensational growth of the accumulation mode comes from hydrocarbon conversion, sulfur conversion provides most of the nuclei.     

Transport and evolution of a winter-time Yellow sand observed in Korea

Long-range transport of mineral dust such as Yellow sand (YS) is not restricted to the springtime periods in Northeast Asia. A YS phenomenon was observed during 25–27 January 1999, which was a remarkably distinctive episode in the occurrence time and intensity that had ever observed in the wintertime in Korea. This YS event was traced to be originated from the arid region of central and eastern Asia; the Gobi desert and Loess plateau. The traveling speed of the dust storm was found to be about 70 km h⁻¹ with it's horizontal size of larger than the whole Korean peninsula during this episode. Aerosol mass loadings changed by an order of magnitude within a few hours. The dominant ion components were SO₄²⁻, NO₃⁻, Ca²⁺ and Na⁺ during the passage of YS. The mode diameter of these compounds of YS was around 4 μm, compared to 0.4–0.9 μm after the passage of YS. SO₄²⁻ and NO₃⁻ concentrations were found to be well correlated with Ca²⁺ concentration in the coarse mode during the YS event, whereas they were well correlated with NH₄⁺ concentration during the non-YS period, indicating a significant amount of SO₄²⁻ and NO₃⁻ formations on the Ca²⁺-rich coarse aerosol during the long-range transport of YS.     

Fungi and bacteria in mould-damaged and non-damaged office environments in a subarctic climate

The fungi and bacterial levels of the indoor air environments of 77 office buildings were measured in winter and a comparison was made between the buildings with microbe sources in their structures and those without such sources. Penicillium, yeasts, Cladosporium and non-sporing isolates were the commonest fungi detected in the indoor air and in settled dust, in both the mould-damaged and control buildings. Aspergillus ochraceus, Aspergillus glaucus and Stachybotrys chartarium were found only in environmental samples from the mould-damaged buildings. Some other fungi, with growth requiring of water activity, a_w, above 0.85, occurred in both the reference and mould-damaged buildings, but such fungi were commoner in the latter type of buildings. The airborne concentrations of Penicillium, Aspergillus versicolor and yeasts were the best indicators of mould damage in the buildings studied. Penicillium species and A. versicolor were also the most abundant fungi in the material samples. This study showed that the fungi concentrations were very low (2–45 cfu m⁻³ 90% of the concentrations being <15 cfu m⁻³) in the indoor air of the normal office buildings. Although the concentration range of airborne fungi was wider for the mould-damaged buildings (2–2470 cfu m⁻³), only about 20% of the samples exceeded 100 cfu m⁻³. The concentrations of airborne bacteria ranged from 12 to 540 cfu m⁻³ in the control buildings and from 14 to 1550 cfu m⁻³ in the mould-damaged buildings. A statistical analysis of the results indicated that bacteria levels are generally <600 cfu m⁻³ in office buildings in winter and fungi levels are <50 cfu m⁻³. These normal levels are applicable to subarctic climates for urban, modern office buildings when measurements are made using a six-stage impactor. These levels should not be used in evaluations of health risks, but elevated levels may indicate the presence of abnormal microbe sources in indoor air and a need for additional environmental investigations.     

Air–land exchanges of CO2, CH4 and N2O measured by FTIR spectrometry and micrometeorological techniques

Micrometeorological flux-gradient and nocturnal boundary layer methods were combined with Fourier transform infrared (FTIR) spectroscopy for high-precision trace gas analysis to measure fluxes of the trace gases CO₂, CH₄ and N₂O between agricultural fields and the atmosphere. The FTIR measurements were fully automated and routinely obtained a precision of 0.1–0.2% for several weeks during a measurement campaign in October 1995. In flux-gradient measurements, vertical profiles of the trace gases were measured every 30 min from the ground to 22 m. When combined with independent micrometeorological measurements of water vapour fluxes, trace gas fluxes from the underlying surface could be determined. In the nocturnal boundary layer method the rate of change in mass storage in the 0–22 m layer was combined with fluxes measured at 22 m to estimate surface fluxes. Daytime fluxes for CO₂ were −0.78±0.40 (1σ) mg CO₂ m⁻² s⁻¹. Daytime fluxes of N₂O and CH₄ were very small and difficult to measure reliably using the flux-gradient technique, despite the high precision of the concentration measurements. Mean daytime flux for N₂O was 17±48 ng N m⁻² s⁻¹, while the corresponding flux for CH₄ was 47±410 ng CH₄ m⁻² s⁻¹. The mean nighttime flux of CO₂ estimated using the nocturnal boundary layer method was +0.15±0.05 mg CO₂ m⁻² s⁻¹, in good agreement with chamber measurements of respiration rates. Nighttime fluxes of CH₄ and N₂O from the nocturnal boundary layer method were 109±69 ng CH₄ m⁻² s⁻¹ and 2±3.2 ng N m⁻² s⁻¹, respectively, in good agreement with chamber measurements and inventory estimates based on the sheep and cattle stocking rates in the region. The suitability of FTIR-based methods for long term monitoring of spatially and temporally averaged flux measurements is discussed.     

Nitrous oxide emissions from mineral and organic soils of a Norway spruce stand in South–West Germany

Due to the high temporal and spatial variability of N₂O fluxes, estimates of N₂O emission from temperate forest ecosystems are still highly uncertain, particularly at larger scales. Although highest N₂O emissions with up to 7.0 kg N ha⁻¹ yr⁻¹ were mainly reported for soils affected by stagnant water, most of the reported gas flux measurements were performed at forest sites with well-aerated soils yielding mostly to low mean annual emission rates less than 1.0 kg N ha⁻¹ yr⁻¹. This study compares N₂O fluxes from upland (Cambisols) and temporally water-logged (Gleysols, Histosols) soils of the Central Black Forest (South-West Germany) over a period of 2 yr. Mean annual N₂O fluxes from investigated soils ranged between 0.2 and 3.9 kg N ha⁻¹ yr⁻¹. The fluxes showed a large variability between the different soil types. Emissions could be clearly ranked in the following order: Cambisols (0.26–0.75 kg N ha⁻¹ yr⁻¹)<Gleysols (1.37–2.68 kg N ha⁻¹ yr⁻¹)<Histosol (3.66–3.95 kg N ha⁻¹ yr⁻¹). Although the Cambisols cover two-thirds of the investigated area, only about half of the overall N₂O is emitted from this soil type. Therefore, regional or national N₂O fluxes from temperate forest soils are underestimated if soils characterised by intermediate aeration conditions are disregarded.     

Sources of sodium in atmospheric fine particles

Concentrations of size fractionated particulate sodium and potassium were measured in both marine and urban air. Marine air sampling was conducted during a cruise on R/V Hakuho-maru in the northwestern North Pacific in the summer of 1998. Urban air sampling was performed in the central part of Tokyo in 1997 and 1998. The fine sodium concentration (D<1.1 μm) in “Urban” air (180 ng m⁻³) was 3 times higher than that in “Marine” air (56 ng m⁻³). In the urban air samples, the size distributions of sodium and potassium showed bimodal peaks in the fine particle range (D<1.1 μm) and in the coarse particle range (D>1.1 μm). The existence of anthropogenic sodium in the fine particle range was detected in the urban air. The K/Na weight ratios in the fine particle range of the urban air (1.8–2.7) was 50–75 times higher than that in seawater (0.036). Potassium in the urban air is thought to be derived largely from anthropogenic sources. In the urban air samples, a high correlation between fine sodium and fine potassium concentrations suggests that they have the same anthropogenic source. Reevaluating the K/Na ratios in marine air to be relatively higher than that in seawater, we can estimate that several percents of anthropogenic sodium can be transported from land to remote marine air.     

Influence of air mass trajectories on the chemical composition of precipitation in India

Chemical composition of precipitation was measured with wet-only samplers at a rural site at Bhubaneswar in eastern India during 1997–1998. All rain events were compared with trajectories and precipitation fields from the ECMWF. The pH and ionic concentrations were found to vary systematically with the origin of air and the amount of rainfall along the trajectory. A seasonal cycle for pH was found with a monthly median pH below 5.0 during October–December. The highest monthly median concentration of Ca²⁺ was found in May with 20 μmol l⁻¹ and for SO₄²⁻ in January with 52 μmol l⁻¹. Samples with trajectories within 400 km from Bhubaneswar during the last 5 days were found to have a median pH slightly below 5.0 as an average. These samples also had the highest concentration for all measured ions, indicating large pollution sources within the region. Samples with continental origin showed a decrease of ∼70% in concentration if there had been rain during >50% of the last 5 days compared to rain during <50% of the last 5 days. High concentrations of Na⁺ and Cl⁻ were also found in continental samples. Resuspension of previously deposited sea salt is believed to be the reason. The data were compared with data from three other sites in western India and higher concentrations of almost all ions (NH₄⁺ being the exception) compared to Bhubaneswar were found at the west coast in monsoon samples.