Assessment of heavy metal releases from the use phase of road transport in Europe

An emission inventory was compiled for heavy metal air emissions from road transport in Europe (EU-40). For the database, country-specific data was taken such as the diesel and gasoline fuel consumption per country, the content of Pb in gasoline and diesel fuel and the share of different vehicle types. For tyre and brake wear emissions, average wear rates and heavy metal contents of different materials were used to develop emission factors for tyre and brake wear. It covers exhaust emissions (Pb from gasoline and diesel) as well as non-exhaust emissions (As, Cd, Cr, Ni and Pb from the wear of brake linings and vehicle tyres). The base year is 2000, and two scenarios were developed for 2010, a business as usual (BAU) scenario and a maximum feasible technical reduction (MFTR) scenario. Both result in a remarkable decrease in Pb exhaust emissions and a rising share of non-exhaust emissions. To assess the results, the inventory is (a) compared to an inventory compiled with a top-down approach that covers the same area and years but only emissions from combustion processes and (b) added to an inventory covering all sectors for heavy metal air emissions.     

Assessing heavy metal pollution in the surface soils of a region that had undergone three decades of intense industrialization and urbanization

Heavy metals in the surface soils from lands of six different use types in one of the world’s most densely populated regions, which is also a major global manufacturing base, were analyzed to assess the impact of urbanization and industrialization on soil pollution. A total of 227 surface soil samples were collected and analyzed for major heavy metals (As, Cd, Co, Cr, Cu, Fe, Hg, Mn, Ni, Pb, and Zn) by using microwave-assisted acid digestion and inductively coupled plasma–mass spectrometry (ICP-MS). Multivariate analysis combined with enrichment factors showed that surface soils from the region (>7.2?×?10⁴ km²) had mean Cd, Cu, Zn, and As concentrations that were over two times higher than the background values, with Cd, Cu, and Zn clearly contributed by anthropogenic sources. Soil pollution by Pb was more widespread than the other heavy metals, which was contributed mostly by anthropogenic sources. The results also indicate that Mn, Co, Fe, Cr, and Ni in the surface soils were primarily derived from lithogenic sources, while Hg and As contents in the surface soils were controlled by both natural and anthropogenic sources. The pollution level and potential ecological risk of the surface soils both decreased in the order of: urban areas?>?waste disposal/treatment sites?～?industrial areas?>?agricultural lands?～?forest lands?>?water source protection areas. These results indicate the significant need for the development of pollution prevention and reduction strategies to reduce heavy metal pollution for regions undergoing fast industrialization and urbanization.     

Relationship between heavy metals concentrations in egret species,their environment and food chain differences from two Headworks of Pakistan

Concentration of ten metals (Cd, Cr, Co, Cu, Fe, Li, Mn, Ni, Pb and Zn) were analyzed in the egg contents, prey and soil samples of little egret (Egretta garzetta) and cattle egret (Bubulcus ibis) from two Headworks to determine habitat and species-specific differences; to assess the importance of prey and habitat contamination as an exposure source for heavy metals. Concentration of Cu, Mn, Cr and Pb in egg contents, Fe, Co, Cu, Mn, Zn in prey and Fe, Co, Cu, Ni, Li in surface soils were significantly different (P < 0.05). Mean metal concentrations of Cr, Pb and Cd were relatively higher in little egret whereas Cu and Mn were higher in the egg contents of cattle egret. The mean concentrations of Cu, Mn and Zn were higher in prey samples of cattle egrets and Cr, Cd and Pb in prey samples of little egrets. In soil samples collected from little egret heronries metal concentrations were higher except Cu and Ni. Correlation Analysis and Hierarchical Agglomerative Cluster Analysis (HACA) identified relatively similar associations of metals and their source identification. Metals such as Fe, Cu, Mn, and Li were related with geochemical origin from parent rock material as well as anthropogenic input whereas Cr, Cd, Pb, Ni, Co and Zn were associated mostly with anthropogenic activities. The study suggested that eggs are useful bio-monitor of local heavy metal contamination.     

Ecological risks and potential sources of heavy metals in agricultural soils from Huanghuai Plain, China

A total of 224 agricultural soil samples from Huanghuai Plain in China were investigated for the concentrations of seven heavy metals (As, Cd, Cr, Hg, Ni, Pb, and Zn). The mean concentrations of the metals were 12, 0.17, 79, 0.04, 35, 25, and 74 mg/kg, respectively. These values are similar or slightly higher than background values in this region, except for Cd with a mean nearly twice the background value. The estimated ecological risks based on contamination factors and potential ecological risk indexes are also mostly low, but considerable for Cd and Hg. Multivariate analysis (including Pearson's correlation analysis, hierarchical cluster analysis, and principal component analysis) clearly revealed three distinct metal groups, i.e., Cr/Ni/Zn, As/Cd/Pb, and Hg, whose concentrations were closely associated with the distribution and pollution characteristics of industries in and around the plain. The main anthropogenic sources for the three metal groups were identified as atmospheric deposition, sewage irrigation/fertilizers usage, and atmospheric deposition/irrigation water, respectively. The present results are well suited for planning, risk assessment, and decision making by environmental managers of this region.     

Source origin of trace elements in PM from regional background,urban and industrial sites of Spain

Despite their significant role in source apportionment analysis, studies dedicated to the identification of tracer elements of emission sources of atmospheric particulate matter based on air quality data are relatively scarce. The studies describing tracer elements of specific sources currently available in the literature mostly focus on emissions from traffic or large-scale combustion processes (e.g. power plants), but not on specific industrial processes. Furthermore, marker elements are not usually determined at receptor sites, but during emission. In our study, trace element concentrations in PM₁₀ and PM_2.5 were determined at 33 monitoring stations in Spain throughout the period 1995–2006. Industrial emissions from different forms of metallurgy (steel, stainless steel, copper, zinc), ceramic and petrochemical industries were evaluated. Results obtained at sites with no significant industrial development allowed us to define usual concentration ranges for a number of trace elements in rural and urban background environments. At industrial and traffic hotspots, average trace metal concentrations were highest, exceeding rural background levels by even one order of magnitude in the cases of Cr, Mn, Cu, Zn, As, Sn, W, V, Ni, Cs and Pb. Steel production emissions were linked to high levels of Cr, Mn, Ni, Zn, Mo, Cd, Se and Sn (and probably Pb). Copper metallurgy areas showed high levels of As, Bi, Ga and Cu. Zinc metallurgy was characterised by high levels of Zn and Cd. Glazed ceramic production areas were linked to high levels of Zn, As, Se, Zr, Cs, Tl, Li, Co and Pb. High levels of Ni and V (in association) were tracers of petrochemical plants and/or fuel-oil combustion. At one site under the influence of heavy vessel traffic these elements could be considered tracers (although not exclusively) of shipping emissions. Levels of Zn–Ba and Cu–Sb were relatively high in urban areas when compared with industrialised regions due to tyre and brake abrasion, respectively.     

Estimation of metal uptake efficiencies from precipitation in mosses in Lithuania

The main sources contributing to heavy metal content in mosses in Lithuania were examined by a comparison of heavy metal concentrations in moss and corresponding deposition levels calculated from bulk deposition analysis. Bulk deposition was collected in open areas as well as under the canopy of trees. Uptake efficiencies in moss were calculated for Cd, Cr, Cu, Fe, Mn, Ni, V and Zn. All elements in moss except Pb and Cd appeared to be more or less influenced by sources other than air pollution. The general order of this influence on the heavy metal content in moss was observed as follows: Ni < V < Cr < Zn < Fe < Mn. The contents of Mn and Zn in moss were greatly influenced by leaching from the canopy while Pb was the only element which showed a net metal retention by the canopy. Concentrations of Fe and Cr in moss were dominating due to contribution from soil dust.     

Status of metal levels and their potential sources of contamination in Southeast Asian rivers

To assess the concentration and status of metal contaminants in four major Southeast Asian river systems, water were collected from the Tonle Sap–Bassac Rivers (Cambodia), Citarum River (Indonesia), lower Chao Phraya River (Thailand), and Saigon River (Vietnam) in both dry and wet seasons. The target elements were Be, Al, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, As, Se, Mo, Ag, Cd, Ba, Tl, and Pb and the concentrations exceeded the background metal concentrations by 1- to 88-fold. This distinctly indicates enrichment by human urban area activities. The results of a normalization technique used to distinguish natural from enriched metal concentrations confirmed contamination by Al, Cd, Co, Mn, Ni, Pb, and Zn. Cluster analysis revealed the probable source of metals contamination in most sampling sites on all rivers studied to be anthropogenic, including industrial, commercial, and residential activities. Stable lead isotopes analyses applied to track the sources and pathways of anthropogenic lead furthermore confirmed that anthropogenic sources of metal contaminated these rivers. Discharges of wastewater from both industrial and household activities were major contributors of Pb into the rivers. Non-point sources, especially road runoff and street dust, also contributed contamination from Pb and other metals.     

Monitoring of non-destructive sampling strategies to assess the exposure of avian species in Jiangsu Province,China to heavy metals

To assess the exposure of avian species in Jiangsu Province, China to eight heavy metals (As, Cd, Cr, Cu, Hg, Ni, Pb and Zn), the flight feathers, eggshells and feces of total ten avian species (including four herons, four cranes, one stork and one gull) were collected during March to May in 2012. The total concentrations of As, Cd and Hg were measured by Atomic Fluorescence Spectrometer; Cr, Cu, Ni, Pb and Zn were measured by inductively coupled plasma optical emission spectrometer. The determined concentrations of Cr (3.94, 1.33–8.30 mg kg^?1), Cu (15.02, 7.34–35.53 mg kg^?1) and Zn (134.66, 77.26–242.25 mg kg^?1) in fresh feathers and Cd (7.93, 7.44–9.12 mg kg^?1), Ni (22.74, 19.38–24.71 mg kg^?1), Pb (85.06, 78.72–91.95 mg kg^?1) and Zn (63.54, 55.82–72.14 mg kg^?1) in eggshells were higher than the mean values of other reported data, indicating a considerable heavy metal pollution status in local area. Comparing to the heavy metal levels in early historic feathers (1992–2000), a significant elevation of concentrations has been observed in recent bird feathers. For feathers of Grus japonensis, the heavy metal concentrations increased by 19–267%. This increased tendency was consistent with local GDP (Gross Domestic Products) development. The anthropogenic economic activity especially industrial development may be a critical reason that caused the increase of heavy metal levels in local avian species.     

Survey of heavy metal pollution and assessment of agricultural soil in Yangzhong district, Jiangsu Province, China

We investigated concentrations of Hg, Cd, Pb, Zn, Cu, As, Ni, and Cr in samples of soil, cereal, and vegetables from Yangzhong district, China. Compared to subsoils, the sampled topsoils are enriched in Hg, Cd, Cu, Pb, Zn, and As. High levels of Cd and Hg are observed in most agricultural soils. Concentrations of Cr and Ni show little spatial variation, and high Cu, Pb, and Zn contents correspond well to areas of urban development. High As contents are primarily recorded at the two ends of the sampled alluvion. The contents of Cd, Hg, and total organic carbon (TOC) increase gradually to maximum values in the upper parts of soil profiles, while Cr and Ni occur in low concentrations within sampled profiles. As, Pb, Cu, and Zn show patterns of slight enrichment within the surface layer. Compared to data obtained in 1990, Cd and Hg show increased concentrations in 2005; this is attributed to the long-term use of agrochemicals. Cr and Ni contents remained steady over this interval because they are derived from the weathering of parent material and subsequent pedogenesis. The measured As, Cu, Pb, and Zn contents show slight increases over time due to atmospheric deposition of material sourced from urban anthropogenic activity. Low concentrations of heavy metals are recorded in vegetables and cereals because the subalkaline environment of the soil limits their mobility. Although the heavy metal concentrations measured in this study do not pose a serious health risk, they do affect the quality of agricultural products.     

Changes of emissions and atmospheric deposition of mercury,lead, and cadmium

This paper reviews the information on trends of past emissions of mercury, lead, and cadmium in Europe, as well as examines current levels and future scenarios of these emissions. The impact of various factors on emission changes is discussed including the implementation of various strategies of emission controls in Europe. Future emissions are forecasted on the basis of various scenarios of economy growth in Europe, implementation of European and global legislation (e.g. the Kyoto agreement), population changes, etc.Changes of emissions of mercury, lead, and cadmium are then related to the changes of concentrations of these contaminants in air and precipitation samples at selected stations in Europe. It can be concluded that the reduction trends of anthropogenic emissions of cadmium and lead in Europe are similar to the reduction trends of air concentrations of these metals during the last 2 decades. Somewhat different relationship has been noted for changes in emissions and precipitation. In general for Europe, 60% reduction of Cd emissions was met by about 45% reductions of Cd concentrations in precipitation at the studied stations during the last 2 decades.There is a potential for further reduction of these emissions until the year 2010 up to about 37% for Cd, 51% for Pb, and 49% for Hg as estimated within various emission scenarios presented in the paper.     

Heavy metals in soils along unpaved roads in south west Cameroon: Contamination levels and health risks

Soils enriched with heavy metals from vehicular emission present a significant exposure route of heavy metals to individuals using unpaved roads. This study assessed the extent of Cd, Cr, Co, Cu, Ni, Pb and Zn contamination of soils along unpaved roads in Cameroon, and the health risks presented by incidental ingestion and dermal contact with the soils using metal contamination factor (CF) pollution load index, hazard quotients (HQ) and chronic hazard index (CHI). CF values obtained (0.9–12.2) indicate moderate to high contamination levels. HQ values for Cr, Cd and Pb exceeded the reference doses. Moderate health hazard exists for road users in the areas with intense anthropogenic activities and high average daily traffic (ADT) volume according to CHI values (1–4) obtained. The economy and quality of life in cities with unpaved roads could be threatened by health challenges resulting from long-term exposure to heavy metal derived from high ADT volumes.     

Assessment of heavy metal contamination in Hindon River sediments: a chemometric and geochemical approach

The aim of this study was to assess the level of heavy metals (Cd, Cr, Cu, Fe, Mn, Ni, Pb, and Zn) in the surface sediments of the Hindon River, India that receives both treated and untreated municipal and industrial discharges generated in and around Ghaziabad, India. Mean metals concentrations (mg kg⁻¹) were in the range of; Cu: 21.70-280.33, Cd: 0.29-6.29, Fe: 4151.75-17318.75, Zn: 22.22.50-288.29, Ni: 13.90-57.66, Mn: 49.55-516.97, Cr: 17.48-33.70 and Pb: 27.56-313.57 respectively. Chemometric analysis was applied to identify contribution sources by heavy metals while geochemical approaches (enrichment factor and geo-accumulation index) were exploited for the assessment of the enrichment and contamination level of heavy metals in the river sediments. Chemometric analysis suggested anthropic origin of Cu, Cd, Pb, Zn, and Ni while Fe showed lithogenic origin. Mn and Cr was associated and controlled by mixed origin. Geochemical approach confirms the anthropogenic influence of heavy metal pollution in the river sediments. The study suggests that a complementary approach that integrates chemometric analysis, sediment quality criteria, and geochemical investigation should be considered in order to provide a more accurate appraisal of the heavy metal pollution in river sediments. Consequently, it may serve to undertake and design effective strategies and remedial measures to prevent further deterioration of the river ecosystem in future.     

Heavy metals in soils: distribution, relationship with soil characteristics and radionuclides and multivariate assessment of contamination sources

The study is dealing with the distribution and the origin of heavy metals (Cd, Cr, Cu, Mn, Ni, Pb and Zn) in soils from a priori non-polluted areas. Positive correlations with organic matter and clay content but not with pH have been observed for most of elements analyzed in this study. Correlations of some metals (Cr, Pb and Zn) and radionuclides (238U and 137Cs) observed for analyzed soils could be explained by their common affinity for clay minerals. Enrichment factor (EF) analysis and cluster analysis (CA) highlighted the lithogenic origin of Cr, Cu, Mn, Ni, Pb and Zn and pointed out the primary input of Cd from anthropogenic sources. It also revealed the need for detailed geochemical surveys in the future in order to decrease the uncertainty of discrimination between lithogenic and anthropogenic origin of metals of interest.     

Source identification and risk assessment of heavy metal contaminations in urban soils of Changsha,a mine-impacted city in Southern China

The urban soils suffered seriously from heavy metal pollutions with rapid industrialization and urbanization in China. In this study, 54 urban soil samples were collected from Changsha, a mine-impacted city located in Southern China. The concentrations of heavy metals (As, Cd, Co, Cu, Mn, Ni, Pb, and Zn) were determined by ICP-MS. The pollution sources of heavy metals were discriminated and identified by the combination of multivariate statistical and geostatistical methods. Four main sources were identified according to the results of hierarchical cluster analysis (HCA), principal component analysis (PCA), and spatial distribution patterns. Co and Mn were primarily derived from soil parent material. Cu, Pb, and Zn with significant positive relationships were associated with mining activities and traffic emissions. Cd and Ni might be affected by commercial activities and industrial discharges. As isolated into a single group was considered to have correlation with coal combustion and waste incineration. Risk assessment of heavy metals in urban soils indicated an overall moderate potential ecological risk in the urban region of Changsha.     

中国商品有机肥重金属分析

测定了来自10个地区不同生产原料的118个商品有机肥样品的重金属含量.结果表明:(1)商品有机肥样品中的Cd、Hg、Pb、Cr、As、Zn、Cu、Ni的平均值分别为0.600、0.120、7.34、84.30、9.45、202.91、91.06、11.01 mg/kg.(2)河南、湖北、上海的商品有机肥中8种重金属平均值均较高;内蒙古的商品有机肥中Cr平均值为20.32 mg/kg,广西的商品有机肥中Zn平均值为51.36mg/kg,远低于所有样品中Cr和Zn平均值.(3)以猪粪为主要生产原料的商品有机肥中重金属平均值最高.(4)Cr超过中国商品有机肥重金属限量标准、欧盟生态标志法的重金属限量标准、加拿大堆肥重金属限量标准(A级)和加拿大堆肥重金属限量标准(B级);As、Cd超过中国商品有机肥重金属限量标准、欧盟生态标志法的重金属限量标准和加拿大堆肥重金属限量标准(A级);Cu、Zn超过欧盟生态标志法的重金属限量标准和加拿大堆肥重金属限量标准(A级);Hg超过加拿大堆肥重金属限量标准(A级);Pb超过中国商品有机肥重金属限量标准;Ni均未超标.     

Spatial variation of heavy metals in surface sediments of Hong Kong mangrove swamps

The degree of heavy metal contamination in the fine-grained (<63 microm) and sand-sized (2 mm-63 microm) fractions of surface sediments in 18 different mangrove swamps (144 random samples) in Hong Kong was examined. Higher concentrations of heavy metals were found in the fine-grained than the sand-sized fractions of the sediment; however, the differences between these two fractions became less significant when the swamp was more contaminated. The principal component analyses show that the 18 mangrove swamps, according to the median concentrations of total heavy metals, were clustered into four groups. The first group included three mangrove swamps in Deep Bay region which are seriously contaminated, with heavy metal concentrations in sediments around 80 microg g(-1) Cu, 240 microg g(-1) Zn, 40 microg g(-1) Cr, 30 microg g(-1) Ni, 3 microg g(-1) Cd and 80 microg g(-1) Pb. The second cluster, made up of another four swamps distributed in different geographical locations (two in Sai Kung district and two in Tolo region), also had elevated levels of Cu, Pb, Ni and Cr in the sediments. Field observation reveals that these seven stands received industrial, livestock and domestic sewage as well as pollution from mariculture activities, suggesting that anthropogenic input is the main source of heavy metal contamination in Hong Kong mangroves. The sediments from other mangrove swamps were relatively uncontaminated.     

Landscape ecology of the Guanting Reservoir, Beijing, China: multivariate and geostatistical analyses of metals in soils

Surface soil samples were collected from 52 sites around Guanting Reservoir in Beijing, China, and contents of 'total' metals (Cu, Zn, Pb, Cd, As, Ni and Cr) were determined. The results indicate that the degree of heavy metal pollution in the soils declines in the order of Cd>Cr>Zn>As>Cu>Ni>Pb. Based on the results of a combination of multivariate statistics and geostatiscal analyses, it was concluded that land application of phosphate fertilizer, wastewater and sludge were the primary sources of Cd and Zn in soils. Whereas As, Cu, Cr and Ni in some soils were due to natural rock weathering. The sources of Pb in soils only partially originated from land application of phosphate fertilizer, but mainly from vehicle exhaust. The greatest concentrations of all metals, except for Pb, were found in Huailai County and the towns of Yanghedaqiao and Guanting.     

巢湖表层沉积物中重金属的分布特征及其污染评价

以巢湖表层沉积物为研究对象,利用BCR连续提取法研究了沉积物中Cr、Co、Ni、Cu、Cd、Zn、V和Pb等8种重金属元素的分布特征,同时运用潜在风险指数法和地累积指数法综合评价了巢湖沉积物中重金属的生态风险。结果表明,巢湖沉积物中的重金属含量在空间上表现出东西高、中间低的分布特征。巢湖表层沉积物中Cr、Co、Ni、V和Cu 5种重金属都主要以残渣态为主,Zn和Cd主要以弱酸提取态为主,Pb以可还原态为主,同时,Co和Cu 2种元素的可交换态及可还原态含量占有较高比例,具有潜在危害性。相关性分析显示,Cr、Cu、Pb、Ni、Zn和Cd 6种重金属元素的来源和分布可能具有相似性,Co和V 2种重金属元素具有相似的地球化学行为且其主要来源可能与其他几种重金属不同。潜在生态风险指数评价结果表明,巢湖表层沉积物中8种重金属元素构成的生态危害顺序为:Cd>Pb>Co>Cu>Ni>Zn>V>Cr,Cd具有高的生态危害等级,其他7种重金属元素均为低生态危害等级。地累积指数法评价结果表明:巢湖沉积物重金属元素的富集程度为Cd>Zn>Pb>Co>Cu>V>Ni>Cr,Cr属于清洁级别,Co、Cu、V和Ni处于轻度污染水平,Zn和Pb处于偏中度污染,Cd达到了重污染水平。     

Monitoring of heavy metal deposition in Northern Italy by moss analysis

A survey of heavy metal deposition in the mountainous territories of Northern Italy was carried out in 1995-96. Moss samples (mainly Hylocomium splendens) were collected in a dense network of sites (about 3.2 sites/1000 km(2)) and the data of metal concentrations in moss tissues were statistically correlated with environmental and climatic factors, as well as with bulk deposition of elements and elemental concentrations in the soil. Three main geographic patterns of metal concentration in mosses could be defined: (1) Fe, Ni, and Cr, all derived both by soil particulates and anthropogenic emissions connected with ferrous metal manufacturing, were mostly concentrated in Northwestern Italy; (2) Cu and Zn, as typical multi-source elements, showed rather high concentrations with little ranges of variation over the whole area and small peaks reflecting local source points; (3) Cd and Pb reflected long-distance transport and showed highest concentrations in the regions with highest precipitation, especially in the Eastern Alps.     

Multivariate statistical and lead isotopic analyses approach to identify heavy metal sources in topsoil from the industrial zone of Beijing Capital Iron and Steel Factory

Heavy metals are considered toxic to humans and ecosystems. In the present study, heavy metal concentration in soil was investigated using the single pollution index (PIi), the integrated Nemerow pollution index (PIN), and the geoaccumulation index (Igeo) to determine metal accumulation and its pollution status at the abandoned site of the Capital Iron and Steel Factory in Beijing and its surrounding area. Multivariate statistical (principal component analysis and correlation analysis), geostatistical analysis (ArcGIS tool), combined with stable Pb isotopic ratios, were applied to explore the characteristics of heavy metal pollution and the possible sources of pollutants. The results indicated that heavy metal elements show different degrees of accumulation in the study area, the observed trend of the enrichment factors, and the geoaccumulation index was Hg > Cd > Zn > Cr > Pb > Cu ≈ As > Ni. Hg, Cd, Zn, and Cr were the dominant elements that influenced soil quality in the study area. The Nemerow index method indicated that all of the heavy metals caused serious pollution except Ni. Multivariate statistical analysis indicated that Cd, Zn, Cu, and Pb show obvious correlation and have higher loads on the same principal component, suggesting that they had the same sources, which are related to industrial activities and vehicle emissions. The spatial distribution maps based on ordinary kriging showed that high concentrations of heavy metals were located in the local factory area and in the southeast-northwest part of the study region, corresponding with the predominant wind directions. Analyses of lead isotopes confirmed that Pb in the study soils is predominantly derived from three Pb sources: dust generated during steel production, coal combustion, and the natural background. Moreover, the ternary mixture model based on lead isotope analysis indicates that lead in the study soils originates mainly from anthropogenic sources, which contribute much more than the natural sources. Our study could not only reveal the overall situation of heavy metal contamination, but also identify the specific pollution sources.