飞机发动机舱灭火剂用量试验验证与优化研究

为提升飞机的安全性,飞机防火系统越来越受到重视。航空防火系统中常用灭火剂Halon 1301会破坏臭氧层、造成环境污染,但至今仍未找到理想的替代品。从优化灭火剂的用量着手,以达到降低污染、减轻飞机重量的目的。目前灭火剂的用量没有结合实际仅依靠理论公式进行计算,为优化灭火剂用量,以某型飞机发动机舱防火系统为例,通过模拟真实环境试验验证不同灭火剂用量下的灭火效果。结果表明优化灭火剂用量后依然能充分地保证灭火效果。     

电容层析成像技术及其在哈龙灭火剂两相流测量中的应用研究

分析了电容层析成像技术的原理、应用现状,针对灭火管网中常见的哈龙灭火剂与氮气(空气)两相流,研究了将电容层析成像技术应用于哈龙灭火管网内对哈龙灭火剂/氮气(空气)两相流的流动状态以及空隙率进行测量的方法。根据不同物质的介电常数不同,通过电容传感器获取初始数据,然后根据获取的电容测量值和图像重建算法重建哈龙灭火剂/氮气(空气)两相流横截面的图像,最终获得灭火管网内哈龙灭火剂/氮气(空气)两相流的流动状态以及空隙率。     

某型飞机APU舱灭火系统设计

旨在设计某型飞机的APU舱灭火系统。通过对已有机型的分析和适航条款的解读,对灭火系统的安装方式和灭火瓶的安装位置进行了研究,计算了所需的灭火剂剂量,使用FLUENT仿真软件模拟了灭火喷嘴的位置和灭火剂喷射效果,为灭火系统的布局和优化提供参考。     

Droplets behaviors of flashing jet in accidental release of superheated liquid

Structural failure of an industrial superheated liquid tank or pipe usually results in the flashing jet consisting of a mixture of massive droplets and vapor due to the violent phase transition. In this work, experiments on small-scale releases were carried out with a 20 L storage tank to investigate the droplets behaviors of flashing jets after accidental releases of superheated liquid. Distribution of droplets axial, radial and vertical velocities, as well as droplets diameter along the centreline of flashing jet, were acquired employing a Phase Doppler Anemometry (PDA). The influence of storage pressure, superheat, and nozzle diameter was also studied. Results show that the distribution of actual droplets with different velocities and diameters follows the normal distribution. Droplets mean three-dimensional velocities on the central axis of flashing jet decrease exponentially with the increase of axial distance. The droplets mean diameter first decreases exponentially and finally keeps sable at about 10 μm. Among three-dimensional velocities, the axial velocity is the highest and the vertical velocity is the lowest. Droplets mean three-dimensional velocities increase with the increase of storage pressure, superheat, and nozzle diameter. The droplets mean diameter decreases with the increase of superheat and nozzle diameter but increases with the increase of storage pressure.     

Morphological characteristics of flashing jet throughout superheated liquid release

Many release problems involve two-phase releases of hazardous materials of superheated liquids with high energy into the atmosphere. Such accidents are accompanied by violent phase transition and form catastrophic flashing jets. In this work, experimental and theoretical analyses were conducted to investigate dynamic characteristics of flashing jet morphology and their dependence on pressure-decay dynamics under different storage pressures, superheats, and nozzle diameters. Flashing jet morphology and angle throughout two-phase releases were captured by a high-speed camera, and the corresponding source pressure in the superheated liquid tank was measured simultaneously. Results show that three typical phases, expansion, stabilization, and decay, are characterized throughout two-phase release based on the evolution of flashing jet morphology. The jet initially expands gradually due to the enhancement of phase transition intensity, and then keeps stable when the intensity reaches its maximum, and terminally decays rapidly due to the depletion of superheated liquid. Phase transition intensity at the nozzle exit is mainly controlled by the pressure-decay dynamics. Bubbles nucleation inception sites gradually move upstream of the nozzle during the pressure decay process increasing the phase transition intensity. The increase of storage pressure, superheat and nozzle diameter promotes the mechanical and thermodynamic effects on the jet breakup. The significant increase of mechanical and thermodynamic effects effectively accelerates droplets evaporation and further affects flashing jet morphology.     

充装条件对水基热气溶胶灭火剂燃速影响规律的研究

水基热气溶胶灭火剂是以替代哈龙为目的而研制的新一代灭火制；主要论述了充装量，充装密度，燃烧器结构等充装条件对水基热气溶胶灭火剂燃烧速度的影响规律，并分析了充装量，充装密度，燃烧器结构影响燃烧速度的原因。     

基于红外吸收法的哈龙替代灭火剂HFC－125的浓度监测技术

HFC-125(五氟乙烷)有较好性能,可替代哈龙灭火剂应用于飞机灭火系统中。在飞机灭火系统的评估实验中,模拟地面或是飞行状态,灭火剂浓度测量设备都是必不可少的。基于非色散红外光谱技术(NDIR),初步设计了HFC-125灭火剂浓度监测设备,该设备采用硅碳红外光源,入射光经过斩波器调制转变为交变光,通过单光路测量气室后,被碲镉汞红外探测器转化为电压信号并被前置放大电路放大。通过电压比与体积分数的对应关系,可以实现对HFC-125浓度的监测。     

消防脉冲水枪喷嘴结构优化研究

为了进一步提高脉冲水枪的灭火效率,采用CFD技术对维多辛斯基曲线结构、锥直结构和锥角结构3种喷嘴结构进行选型优化。CFD数值模型采用RNG k-ε方法模拟湍流,利用VOF模型追踪管道内部及外部流场的气液界面,研究了不同喷嘴结构对气液分布、能量转化、速度分布的影响,并结合水室中水的体积分数和出口速度曲线图对喷射周期进行分析。研究结果表明:维多辛斯基曲线结构射流周期T=14.8 ms、锥直结构T=15.4 ms、锥角结构T=17 ms;维多辛斯基曲线结构和锥直结构的出口速度衰减较缓慢,喷嘴前端的圆柱结构能提高射流速度的稳定性;维多辛斯基曲线结构喷嘴的出口速度更稳定、集束性更好、能量转化率更高,且产生的射流水柱呈锥式逐渐扩散,动能集中分布在轴线附近,能有效增大喷射距离,提高脉冲水枪的灭火效率。     

哈龙固定灭火系统替代技术

介绍了哈龙固定灭火系统淘汰背景,哈龙灭火系统替代技术发展现状。结合消除建审工作经验,阐述了作为哈龙替代系统且目前在国内工程实践中应用的CO2灭火系统、INERGEN灭火系统、FM-200灭火系统及EBM灭火系统主要性能及与哈龙系统的差异,探讨哈龙替代系统技术发展趋势,对气体灭火系统设计选型有一定参考价值。     

提高水基热气溶胶灭火剂燃速途径的研究

水基热气溶胶灭火剂是以替代哈龙为目的而研制的新一代气溶胶灭火剂；因为其燃烧速度对灭火效率有重大影响，故本文在理论分析的基础上，采用加入金属粉提高导热系数，增加反应放热量；加入正催化剂降低反应活化能；在反应器中采用导流管除去燃烧表面的液态产物，加强燃烧反应的热反馈等方式提高灭火剂燃速。     

Fire-Extinguishing Effectiveness of 1-Bromo-3,3,3-Trifluoropropene/Inert Gaseous Mixture Evaluated by Cup Burner Method

1-bromo-3,3,3-trifluoropropene with low extinguishing concentration has been identified, but it has high boiling points and is not suitable replacements for halon 1301. However, mixtures of 1-bromo-3,3,3-trifluoropropene in an inert gas could produce fire-extinguishing agents with many of the desirable properties of halon 1301. To study binary fire suppressants, one has to determine the extinguishing concentration of the 1-bromo-3,3,3-trifluoropropene/inert gas mixtures. In this study, a method based on cup-burner was used to estimate the extinguishing concentration of 1-bromo-3,3,3-trifluoropropene/inert gas mixtures. A mechanism for mixing 1-bromo-3,3,3-trifluoropropene with inert gas before applying to fire was proposed. The results show that addition of small amount of 1-bromo-3,3,3-trifluoropropene in inert gas reduces the extinguishing concentration of inert gas considerably, and 1-bromo-3,3,3-trifluoropropene/inert gas mixture suppressant shows strong synergistic interactions at low mole concentration of 1-bromo-3,3,3-trifluoropropene.     

半封闭空间中水喷淋和泡沫灭火系统灭油池火实验研究

为了对比泡沫灭火系统和水喷淋灭火系统的灭火效率,采用装有400 mL汽油或柴油的280 mm×280 mm油盆模拟火源,分析了0.35,0.48和0.75 MPa压力下泡沫灭火系统和水喷淋灭火系统灭油池火的灭火时间、降温冷却效率及火焰面积。结果表明:泡沫灭火系统比水喷淋灭火系统灭油池火的效果更好,对汽油火的灭火时间比水喷淋灭火系统缩短了35.3%,压力对于灭火效率没有影响;柴油火的灭火效率随压力的增加而增加,不同压力下灭火时间比水喷淋灭火系统分别缩短了35.7%,42.9%和66.4%。     

Flame extension length of inclined hydrogen jet fire impinging on a water curtain

The use of a water curtain system to prevent fire spread has been extensively investigated, but the case of an inclined jet fire inhibited with a water curtain is not involved. A series of experiments were conducted on inclined hydrogen jet fires with various fuel flow rates, nozzle diameters and inclination angles under the influence of a vertical water curtain. This study aims to explore the burning behaviors of inclined jet flames at the impingement area, specifically the flame extension lengths. The experimental results show that an increase in fuel flow rates or nozzle diameter leads to a larger flame extension length. With the increase of flame inclination angle, the flame extension length decreases and the influence of nozzle diameter on the flame extension length is attenuated. A new dimensionless heat release rate is proposed to correlate with the dimensionless flame extension length by incorporating an air entrainment coefficient. The model built in this study can be used to predict the flame extension length of jet flames with different diameters, fuel flows and inclinations under the influence of a water curtain, and is validated by data in the previous study.     

基于Fluent的城镇中低压燃气管线喷射火事故的后果研究

为了对城镇中低压燃气管线喷射火事故进行有效的风险评估,根据典型事故案例创建了城镇路面埋地燃气管线泄漏场景,建立模型并划分网格,使用Fluent进行模拟计算,得到了不同泄漏口孔径、不同泄漏口形状、不同管内压力等工况下喷射火的火焰长度、火焰中心面温度分布和临近区域内的热流密度,并通过分析不同工况下的火焰形态和热辐射分布,探讨初始条件对事故后果的影响程度。结果表明:此类型喷射火长度可达数十米,火焰最高温度为2 000 K左右,最高温度位置的高度不超过火焰长度的30%;下风向的热流密度较其他方向更强;在50 mm的泄漏口孔径和0.38 MPa的管内压力下,泄漏口为梭子形,较泄漏口为圆形时的热流密度在下风向整体大15.2%。最后,根据模拟结果构建了快速风险评估模型。     

障碍物遮挡条件下细水雾与油池火相互作用的实验研究

障碍物影响下细水雾灭火有效性的研究具有重要的意义。研究了障碍物与火焰的相对位置、细水雾工作压力、喷头距离火焰垂直距离及水平距离等因素对灭火有效性的影响,以及细水雾作用下火灾烟气中一氧化碳、二氧化碳及氧气浓度的变化规律等。结果表明:高压细水雾可以有效扑救部分有障碍物遮挡的油池火,同时喷头距离火焰的水平距离和垂直距离也显著影响着细水雾的灭火速度;高压细水雾在灭火过程中火场的氧气浓度明显升高,二氧化碳和一氧化碳浓度明显降低;细水雾工作压力较低时,一氧化碳浓度反而有所增加。     

不同聚合度的聚磷酸铵灭火性能研究*

为考察聚磷酸铵（APP）干粉灭火剂的聚合度对其灭火性能的影响,选用3种不同聚合度的APP,结合其晶体结构、粒度分布及热性能测试,并通过粉体杯式燃烧器进行小尺寸灭火实验,对比3种样品的灭火性能及灭火机理,研究聚合度与其灭火性能的关系。热性能测试结果显示,聚合度的升高会导致APP的热稳定性下降,随着聚合度从80升至1 500,其初始分解温度从326.11 ℃降低至321.54 ℃,失重率从75.21%增加至79.66%。实验结果表明:随着APP聚合度的增加,火焰降温速率升高,最小灭火浓度（MEC）降低,灭火性能增强,当聚合度为1 500时,MEC为118.143 g/m3。聚合度的升高有助于APP在进入火场后更早、更充分地与火焰发生反应,从而使灭火性能得到提升。     

飞机货舱低气压环境对火灾探测参量影响研究

旨在为飞机货舱火灾探测系统设计和研制提供理论支撑,在飞机货舱环境模拟实验舱内开展了70kPa、80kPa、90kPa和100kPa下正庚烷火灾实验,分析了低气压环境对顶棚温度、烟气密度和气体浓度火灾探测参量的影响规律。低压下空气密度较小,卷吸系数减小,导致顶棚最高温升增加,顶棚温度衰减变快。同时,低压下烟气密度降低,并与压力呈指数关系,指数系数约为0.946,扩展了前人研究结果的应用范围。CO浓度最大值随压力降低而增加,且CO增长速率与压力呈负指数关系。CO2增长速率随着压力降低而略有减小。     

A study of the probability distribution of pool fire extinguishing times using water mist

Water mist, a replacement for Halon gaseous agents in fire fighting, has been studied for decades. However, the fire-extinguishing reliability of water mist is debated. For example, there are significant differences in extinguishing times between tests conducted under the same conditions, and water mists have difficulty extinguishing small fires. To date, no study of the probability distribution of extinguishing times has been reported. In this study a statistical analysis of the extinguishing time distribution of pool fires extinguished using water mist is presented. The fire sources were circular/square stainless steel pans with gasoline, diesel, ethanol or daqing RP-3 as fuel. Two types of extinguishing scenarios were observed. In one situation, the fire was extinguished via a blow off process, when the flames had not yet been suppressed. Flame cooling is the primary fire extinguishing mechanism; the mass loss rate and combustion heat of the fuel are two key factors. In the other situation, the fire was initially suppressed and subsequently extinguished after a long suppression stage. Surface cooling is the primary fire extinguishing mechanism; the flash point of the fuel is the key factor.     

Efficiency characterization of fire extinguishing compound superfine powder containing Mg(OH)2

To improve the fire extinguishing efficiency of existing dry powders, a new type of superfine dry powder was prepared using magnesium hydroxide as an additive. In our study, a thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) were used to analyze the thermal decomposition of the synthesized powders. The temperature of thermal decomposition, weight loss, and other thermodynamic parameters of the fire extinguishing powders were analyzed to explain the performance advantages of the compound superfine powder. Through a small-scale fire experiment, the physical parameters of the extinguishing process—such as extinguish time, powder dosage, smoke concentration, and minimum extinguishing concentration—were quantified for the suppression of a diesel fire using the different powders; these parameters were used to evaluate the fire extinguishing capacity and toxic gas suppression ability of the powders. TGA demonstrated that the compound superfine powder decomposed more quickly and its thermal decomposition process was much shorter than those of the other powders. The DSC data indicated that the compound superfine powder could decrease the characteristic temperature at each stage and thus the powder absorbed the flame's heat more quickly and suppressed flame propagation. The fire extinguishing test demonstrated that the consumption of the three types of fire extinguishing powder decreased with an increase in the driving pressure, and the order of powder dosage was as follows: commercial dry powder > superfine powder > compound superfine powder. Similarly, the order of minimum extinguishing concentration was as follows: commercial dry powder > superfine powder > compound superfine powder. Furthermore, the compound superfine powder exhibited a greater capacity for controlling toxic and harmful gas emissions.     

含微胶囊添加剂的低压细水雾厨房灭火实验研究

通过全尺寸实验研究低压细水雾对抑制和熄灭K类火灾的有效性。选用三种喷头进行灭火实验,并选择灭火效果最好的喷头进行含微胶囊F-500添加剂的细水雾灭火实验。结果表明,低压细水雾对抑制和熄灭食用油火灾具有一定的效果,但容易发生复燃。而添加了微胶囊F-500的低压细水雾,灭火效率较纯细水雾提高约3～10倍,且能有效地避免复燃,同时提高了火场的能见度。不同浓度的F-500溶液具有不同的灭火效果,综合考虑经济性和有效性因素,3％浓度的F-500溶液是厨房低压细水雾灭火系统的最佳灭火介质。