Protein adducts as biomarkers of exposure to aromatic diisocyanates in workers manufacturing polyurethane (PUR) foam

This work was undertaken to investigate the usefulness of diisocyanate-related protein adducts in blood samples as biomarkers of occupational exposure to toluene diisocyanate (TDI; 2,4- and 2,6-isomers) and 4,4'-methylenediphenyl diisocyanate (MDI). Quantification of adducts as toluene diamines (TDAs) and methylenedianiline (MDA) was performed on perfluoroacylated derivatives by gas chromatography-mass spectrometry (GC-MS/MS) in negative chemical ionisation mode. TDI-derived adducts were found in 77% of plasma and in 59% of globin samples from exposed workers manufacturing flexible polyurethane foam. The plasma levels ranged from 0.003 to 0.58 nmol mL(-1) and those in globin from 0.012 to 0.33 nmol g(-1). The 2,6-isomer amounted to about two-thirds of the sum concentration of TDA isomers. MDI-derived adducts were detected in 3.5% of plasma and in 7% of globin samples from exposed workers manufacturing rigid polyurethane foam. A good correlation was found between the sum of TDA isomers in urine and that in plasma. The relationship between globin adducts and urinary metabolites was ambiguous. Monitoring TDI-derived TDA in plasma thus appears to be an appropriate method for assessing occupational exposure. Contrary to TDI exposure, adducts in plasma or globin were not useful in assessing workers' exposure to MDI. An important outcome of the study was that no amine-related adducts were detected in globin samples from TDI- or MDI-exposed workers, alleviating concerns that TDI or MDI might pose a carcinogenic hazard. Further studies are nevertheless required to judge whether diisocyanates per se could be such a hazard.     

Exposure to airborne isocyanates and other thermal degradation products at polyurethane-processing workplaces

The thermal degradation products of polyurethanes (PURs) and exposure to isocyanates were studied by stationary and personal measurements in five different occupational environments. Isocyanates were collected on glass fibre filters impregnated with 1-(2-methoxyphenyl)piperazine (2MP) and in impingers containing n-dibutylamine (DBA) in toluene. connected to a glass fibre postfilter. The derivatives formed were analysed by liquid chromatography: 2MP derivatives with UV and electrochemical detection and DBA derivatives with mass spectrometric detection. The release of aldehydes and other volatile organic compounds into the air was also studied. In a comparison of the two sampling methods, the 2MP method yielded about 20% lower concentrations for 4,4'-methylenediphenyl diisocyanate (MDI) than did the DBA method. In car repair shops, the median concentration of diisocyanates (given as NCO groups) in the breathing zone was 1.1 microg NCO m(-3) during grinding and 0.3 microg NCO m(-3) during welding, with highest concentrations of 1.7 and 16 pg NCO m(-3), respectively. High concentrations of MDI, up to 25 and 19 microg NCO m(-3), respectively, were also measured in the breathing zone during welding of district heating pipes and turning of a PUR-coated metal cylinder. During installation of PUR-coated floor covering, small amounts of aliphatic diisocyanates were detected in the air. A small-molecular monoisocyanate, methyl isocyanate, and isocyanic acid were detected only during welding and turning operations. The diisocyanate concentrations were in general higher near the emission source than in the workers' breathing zone. A sampling strategy to evaluate the risk of exposure to isocyanates is presented.     

Airborne thermal degradation products of polyurethene coatings in car repair shops

A methodology for workplace air monitoring of aromatic and aliphatic, mono- and polyisocyanates by derivatisation with di-n-butylamine (DBA) is presented. Air sampling was performed using midget impinger flasks containing 10 ml of 0.01 mol l(-1) DBA in toluene and a glass-fibre filter in series after the impinger flask, thereby providing the possibility of collecting and derivatising isocyanates in both the gas and particle phases. Quantification was made by LC-MS, monitoring the molecular ions [MH]+. Air samples taken with this method in car repair shops showed that many different isocyanates are formed during thermal decomposition of polyurethane (PUR) coatings. In addition to isocyanates such as hexamethylene (HDI), isophorone (IPDI), toluene (TDI) and methylenediphenyl diisocyanate (MDI), monoisocyanates such as methyl (MIC), ethyl (EIC), propyl (PIC), butyl (BIC) and phenyl isocyanate (PhI) were found. In many air samples the aliphatic monoisocyanates dominated. During cutting and welding operations, the highest levels of isocyanates were observed. In a single air sample from a welding operation in a car repair shop, the highest concentrations found were: MIC, 290; EIC, 60; PIC, 20; BIC, 9; PhI, 27; HDI, 105; IPDI, 39; MDI, 4; and 2,4-TDI and 2,6-TDI 140 microg m(-3). Monitoring the particle size distribution and concentration during grinding, welding and cutting operations showed that ultrafine particles (< 0.1 microm) were formed at high concentrations. Isocyanates with low volatility were mainly found in the particle phase, but isocyanates with a relatively high volatility such as TDI, were found in both the particle and gas phases.     

Indoor air pollution evaluation with emphasize on HDI and biological assessment of HDA in the polyurethane factories

Today, many raw materials used in factories may have a dangerous effect on the physiological system of workers. One of them which is widely used in the polyurethane factories is diisocyanates. These compounds are widely used in surface coatings, polyurethane foams, adhesives, resins, elastomers, binders, and sealants. Exposure to diisocyanates causes irritation to the skin, mucous membranes, eyes, and respiratory tract. Hexamethylene diamine (HDA) is metabolite of hexamethylene diisocyanate (HDI). It is an excretory material by worker’s urine who is exposed to HDI. Around 100 air samples were collected from five defined factories by midget impinger which contained dimethyl sulfoxide absorbent as a solvent and tryptamine as reagent. Samples were analyzed by high-performance liquid chromatography with EC\UV detector using NIOSH 5522 method of sampling. Also, 50 urine samples collected from workers were also analyzed using William’s biological analysis method. The concentration of HDI into all air samples were more than 88 xxxμg/m³, and they have shown high concentration of pollutant in the workplaces in comparison with NIOSH standard, and all of the workers’ urine were contaminated by HDA. The correlation and regression test were used to obtain statistical model for HDI and HDA, which is useful for the prediction of diisocyanates pollution situation in the polyurethane factories.     

Uranium bioassay and radioactive dust measurements at some uranium processing sites in Egypt--health effects

The safety of radiation workers in the uranium mining industry requires close and continuous monitoring of their working conditions. In this study, external radiation surveillance, radioactive dust monitoring and the bioassay of uranium were carried out in some processing sites. As dust represents one of the most important sources of radiation exposure in mills and mines, dust monitoring and bioassays were performed for a sample of workers on the production lines. The concentration of uranium in air ranged from 22.6 x 10(-7) to 11.1 x 10(-5) Bq cm-3, and the exposure levels ranged from 1 to 80 microSv h-1. Laser fluorimetric determination of uranium in urine samples showed concentrations in the range 8.4-29.2 micrograms L-1. Renal function parameters, such as serum creatinine and urea, and hematological parameters were determined in an attempt to correlate them with radiation exposure and the health status of the workers. Urine specimens collected from workers at the ore crushing and separation site showed elevated concentrations of uranium (up to 29.2 micrograms L-1) and a strong correlation between these concentrations and the registered serum creatinine. The mean uranium excretion in the investigated group was more than 20 times the occupational exposure decision level for urine uranium of 0.8 microgram L-1.     

Solvent-free sampling with di-n-butylamine for monitoring of isocyanates in air

The solvent-free sampler for airborne isocyanates consisted of a polypropylene tube with an inner wall coated with a glass fibre filter, coupled in series with a 13 mm glass fibre filter. The filters were impregnated with reagent solution containing equimolar amounts of di-n-butylamine (DBA) and acetic acid. Air sampling was performed with an air flow of 0.2 l min(-1). The formed isocyanate-DBA derivatives were determined using liquid chromatography and tandem mass spectrometry. The sampler was investigated in regard to collection principle and extraction of the formed derivatives with good results. The possibility to store the sampler before sampling and to perform long-term sampling was demonstrated. Field extraction of the sampler was not necessary, as there was no difference between immediately extracted samples and stored ones (2 days). In comparative studies, the sampler was evaluated against a reference method, impinger-filter sampling with DBA as reagent. The ratios between the results obtained with the sampler and the reference in a test chamber at a relative humidity (RH) of 45% was in the range of 83-109% for isocyanates formed during thermal decomposition of PUR. At RH 95%, the range was 72-101% with the exception of isocyanic acid. In two field evaluations, the ratios for fast curing 2,4'- and 4,4'-methylene bisphenyl diisocyanate (MDI) was in the range 81-113% and for the 3-ring MDI the range was 54-70%. For the slower curing 1,6-hexamethylene diisocyanate (HDI) and HDI isocyanurate, the ratios were in the range 78-145%. In conclusion, the solvent-free sampler is a convenient alternative in most applications to the more cumbersome impinger-filter sampler.     

Multi-component assessment of worker exposures in a copper refinery. Part 2. Biological exposure indices for copper, nickel and cobalt

Urinary copper (Cu), nickel (Ni) and cobalt (Co) concentrations were determined for 127 Cu refinery workers (40 females, 87 males), with values of the 95% upper confidence interval of the geometric mean in nmol per mmol creatinine of 89 (Ni), 42 (Cu) and 3.4 (Co) for electrorefinery workers. In the pyrometallurgical departments, the corresponding concentrations were 37 (Ni), 99 (Cu) and 11 (Co). Female workers had higher Co urinary concentrations than males (p< or = 0.05) while no gender difference was observed for Cu and Ni. Inter-elemental correlations were moderate to weak. Based on the inhalable aerosol levels reported previously for the same workers, the observed urinary Cu concentrations were considerably lower than expected, relative to Co and Ni. This is interpreted in terms of the current understanding of Cu homeostasis.     

Determination of isocyanates, aminoisocyanates and amines in air formed during the thermal degradation of polyurethane

An air sampling method for the determination of isocyanates, aminoisocyanates and amines formed during the thermal degradation of polyurethane (PUR) is presented. The method is based on the collection of air samples using impinger flasks containing di-n-butylamine (DBA) in toluene with a glass fibre filter in series. Isocyanates are derivatized with DBA to urea derivatives, and amines are derivatized in a subsequent work-up procedure with ethyl chloroformate (ET) to carbamate esters. Amine, aminoisocyanate and isocyanate derivatives were characterized using liquid chromatography-time of flight mass spectrometry (LC-TOFMS) and liquid chromatography-chemiluminescent nitrogen detection (LC-CLND). Quantification was performed by LC-MS, monitoring molecular ions [MH]+ in the electrospray mode. The instrumental detection limits for amines, aminoisocyanates and isocyanates were in the ranges 30-40, 2-3 and 3-70 fmol, respectively. Thermal degradation products of PUR were observed in high concentrations during welding in district heating pipes and PUR-coated metal sheets. Eleven isocyanates, three amines and five aminoisocyanates were identified. The concentrations of isocyanates, aminoisocyanates and amines in samples collected in the smoke close to the welding spot were in the ranges 150-650, 4-290 and 1-70 ppb, respectively. In samples collected in the breathing zone, isocyanates and aminoisocyanates were observed in the ranges 9-120 and 4-19 ppb, respectively. The compounds were present in both gas and particle phases. Volatile compounds dominated in the gas phase, whereas less volatile compounds dominated in the particle phase. The method presented makes it possible to sample and determine amines and aminoisocyanates, in addition to isocyanates. The need to monitor these compounds is clearly illustrated by the high concentrations found during the thermal degradation of PUR.     

Air concentrations and urinary metabolites of polycyclic aromatic hydrocarbons among paving and remixing workers

The exposure of paving workers to polycyclic aromatic hydrocarbons (PAH) during stone mastic asphalt (SMA) paving and remixing was evaluated. The effects on the workers' PAH exposure were also evaluated during the use of an industrial by-product, coal fly ash (CFA), instead of limestone as the filler in the SMA. The PAH exposure was measured by personal air sampling and by analysing the levels of urinary naphthols, phenanthrols and 1-hydroxypyrene (1-OHP) in the workers' pre- and post-shift urine samples. The respiratory PAH exposure of the paving workers (geometric mean (GM) 5.7 microg m(-3)) was about ten-fold that of the traffic controllers (GM 0.43 microg m(-3)). The levels of PAH metabolites were significantly higher (p < 0.05) in the post-shift urine samples than in the pre-shift urine samples, and the levels of metabolites in the post-shift urine of paving workers were significantly higher than in that of the controls (p < 0.01). Urinary 1-naphthol correlated well with the airborne concentrations of the two- to three-ring PAHs (r = 0.544, p = 0.003) and naphthalene (r = 0.655, p < 0.001), when non-smoking paving workers were tested. A good correlation was observed between urinary 1-OHP and the airborne concentrations of the four- to six-ring PAHs (r = 0.524, p = 0.003) as well as total PAHs (r = 0.575, p = 0.001). The concentrations of 1-OHP and phenanthrols in the urine of the pavers were significantly higher (p < 0.01) during remixing than during SMA paving. The CFA in the asphalt had no effect on the airborne PAH exposure or on the concentrations of the PAH metabolites in the paving workers' urine.     

Determination of germanium in urine and its usefulness for biomonitoring of inhalation exposure to inorganic germanium in the occupational setting

The present study aimed to assess whether urinary germanium concentration can be used as a biomarker of inhalation exposure to airborne dust from metallic germanium (Ge) or GeO2 in the occupational setting. A novel hydride generation-based method coupled with fow-injection graphite furnace atomic absorption spectrometry (HG/FI-GFAAS) was developed for the determination of urinary germanium. It was found that urinary germanium concentration could be reliably determined by a standard additions method after thorough digestion of the urine and careful pH adjustment of the digest. The limit of detection (LOD) in urine for the HG/FI-GFAAS method was 0.25 microg Ge L(-1). In Belgian control male subjects, the urinary germanium concentration was below this LOD. In 75 workers currently exposed to inorganic germanium compounds, respirable and inhalable concentrations of germanium in the aerosols were measured on Monday and Friday at the job sites using personal air samplers. Spot-urine samples were collected on the same days before and after the work shift. The germanium concentrations of respirable dust correlated very well with those of inhalable dust and represented 20% of the inhalable fraction. Workers exposed to metallic Ge dust were on average ten times less exposed to germanium than those whose exposure involved GeO2 (3.4 versus 33.8 microg Ge m(-3)). This difference was reflected in the urinary germanium concentrations (3.4 versus 23.4 microg Ge g(-1) creatinine). Regression analysis showed that the concentration of germanium in the inhalable fraction explained 42% of the post-shift urinary germanium concentration either on Monday or on Friday, whereas in a subgroup of 52 workers mainly exposed to metallic germanium dust 57% (r = 0.76) of the Monday post-shift urinary germanium was explained. Urinary elimination kinetics were studied in seven workers exposed to airborne dust of either metallic Ge or GeO2. The urinary elimination rate of germanium was characterised by half-times ranging from 8.2 to 18.1 h (on average 12 h 46 min). The present study did not allow discrimination between the germanium species to which the workers were exposed, but it showed fast urinary elimination kinetics for inhalation exposure to dust of metallic Ge and GeO2. It pointed out that urine samples taken at the end of the work shift can be used for biological monitoring of inorganic germanium exposure in the occupational setting.     

Air exposure assessment and biological monitoring of manganese and other major welding fume components in welders

In a cross-sectional study, 96 welders were compared with 96 control subjects. Also 27 former welders, all diagnosed as having manganism, were examined. Exposure to welding fumes was determined in the 96 welders, while the concentration of elements in whole blood and urine was determined in all subjects. The geometric mean (GM) concentrations of manganese (Mn) and iron in the workroom air were 97 microg m(-3) (range 3-4620 microg m(-3); n=188) and 894 microg m(-3) (range 106-20 300 microg m(-3); n=188), respectively. Thus the Mn concentration in the workroom air was on average 10.6% (GM) of that of the Fe concentration. No substantial difference was observed in the air Mn concentrations when welding mild steel as compared to welding stainless steel. The arithmetic mean (AM) concentration of Mn in whole blood (B-Mn) was about 25% higher in the welders compared to the controls (8.6 vs. 6.9 microg l(-1); p < 0.001), while the difference in the urinary Mn concentrations did not attain statistical significance. A Pearson's correlation coefficient of 0.31 (p < 0.01) was calculated between B-Mn and Mn in the workroom air that was collected the day before blood sampling. Although the exposure to welding fumes in the patients had ceased on average 5.8 years prior to the study (range 4 years-7 years), their AM B-Mn concentration was still higher than in referents of similar age (8.7 microg l(-1) vs. 7.0 microg l(-1)). However, their urinary concentrations of cobolt, iron and Mn were all statistically significantly lower.     

Coupling of solvent-based de-emulsification dispersive liquid–liquid microextraction with high performance liquid chromatography for simultaneous simple and rapid trace monitoring of 2,4-dichlorophenoxyacetic acid and 2-methyl-4-chlorophenoxyacetic acid

A simple, rapid, and efficient sample pretreatment technique, based on solvent-based de-emulsification dispersive liquid–liquid microextraction (SD-DLLME), followed by high performance liquid chromatography (HPLC) has been developed for simultaneous preconcentration and trace detection of 2,4-dichlorophenoxyacetic acid (2,4-D) and 2-methyl-4-chlorophenoxyacetic acid (MCPA) in water and urine samples. Some parameters such as acidity of solution, the amount of salt, type, and volume of extraction solvents, type of disperser/de-emulsifier solvent, and its volume were investigated and optimized. Under optimum extraction conditions, the limits of detections (LODs) of this method for MCPA and 2,4-D were 0.2 and 0.6 μg L^?1 (based on 3S_b/m) in water and 0.4 and 1.6 μg L^?1 in urine, respectively. Furthermore, dynamic linear range of this method for MCPA and 2,4-D was 1–300 and 2–400 μg L^?1, repectively. Finally, the applicability of the proposed method was evaluated by extraction and determination of the herbicides in urine and different water samples.     

Carbon disulfide at a Chinese viscose factory external and internal exposure assessment

This article presents the results of carbon disulfide exposure measurements in a Chinese viscose rayon factory. The objectives of the study were to identify the external exposure levels at a large factory and to investigate the 2-thiothiazolidine-4-carboxylic acid (TTCA) concentrations in the urine of the subjects who were exposed to carbon disulfide in the working place atmosphere. The metabolism of carbon disulfide in the exposed subjects was also studied in order to demonstrate the best points in time for the internal exposure sampling. The measurement of the amount of personal exposure to carbon disulfide in the air of the workplace was performed by GC-FPD; the presence of TTCA in the workers urine was analyzed by use of a modified HPLC method. The kinetics of TTCA excretion was studied by analyses at different time-points both during and after exposure to carbon disulfide in the subjects. A total of 155 personal samples were obtained. The carbon disulfide concentration in the staple viscose hall was 13.72 +/- 1.12 mg m-3 in terms of the geometric mean +/- geometric standard deviation, and was 20.05 +/- 1.33 mg m-3 in the filament spinning hall. The TTCA values in the subjects who worked in the staple spinning hall were 1.18 +/- 0.43 mg g-1 creatinine and 1.07 +/- 0.38 mg g-1 creatinine for subjects working in the filament spinning hall. The best time for TTCA sampling is at the end of the working shift, the TTCA excretion was stable for a period of 4-12 h after exposure of the subjects to the carbon disulfide. It might be that the Chinese have different anthropometric characteristics; a sampling bias may therefore appear among different races.     

Effects of pesticides used in agriculture on the development of precocious puberty

The present study aims to evaluate the effects of pesticides on premature breast development. Forty-five girls (group 1) with premature breast development living in the Menderes region, where greenhouse cultivation is the main income, 16 girls (group 2) living in Izmir city with early puberty, and 33 girls (group 3) who had no signs of puberty were included in the study. Endosulphan 1, endosulphan 2, endosulphan sulphate, methoxychlor, vinclozolin, 4,4-dichlorodiphenyldichlorethylene (DDE), 4,-dichlorodiphenyltrichloroethane (DDT), and 2,4-DDT were evaluated in the serum and adipose tissues of the groups by using a gas chromatography-mass spectrometry method. With the exception of 4,4'-DDE, the pesticides studied were undetectable in the serum and adipose tissue samples. The levels of basal luteinizing hormone (LH), stimulated LH, follicle-stimulating hormone, and the long axis of the uterus and both ovaries were significantly different in the girls who had premature thelarche and detectable 4,4'-DDE levels compared to the girls who had premature thelarche and undetectable 4,4'-DDE levels in serum and adipose tissues. The presence and levels of pesticides in serum and adipose tissues were not related to precocious puberty (PP). The mechanisms that lead to PP may also result in obesity, and obesity may be the underlying cause for PP in this group.     

Determination of isocyanic acid in air

A method is presented for the determination of isocyanic acid (ICA), HNCO, in air samples as a di-n-butylamine (DBA) derivative. The method is based on sampling in midget impinger flasks containing 10 ml of 0.01 mol l-1 DBA in toluene. Quantification was made using liquid chromatography (LC) and electrospray mass spectrometry (MS) monitoring positive ions. The instrumental detection limit for the LC-MS was 10 fmol of ICA-DBA. ICA was generated by thermal decomposition of urea. A standard solution containing the DBA derivatives of ICA was prepared by collecting the emitted ICA in an impinger flask containing DBA. ICA in the reference solution was characterised by LC and time-of-flight (TOF) MS and quantified by LC chemiluminescent nitrogen detection (LC-CLND). The instrumental detection limit for the LC-CLND was 1 ng of nitrogen. ICA was emitted during thermal degradation of PFU resins and polyurethane (PUR) lacquers, from car metal sheets. ICA was the most dominant isocyanate and in PUR coating up to 8% of the total weight was emitted as ICA and for PFU resins up to 14% was emitted as ICA. When air samples were collected in an iron foundry during casting in sand moulds with furan resins, concentrations of ICA in the range 50-700 micrograms m-3 were found in the working atmosphere.     

Quantitative monitoring of dermal and inhalation exposure to 1,6-hexamethylene diisocyanate monomer and oligomers

Respiratory sensitization and occupational asthma are associated with exposure to 1,6-hexamethylene diisocyanate (HDI) in both monomeric and oligomeric forms. The monomer and polymers of diisocyanates differ significantly in their rates of absorption into tissue and their toxicity, and hence may differ in their contribution to sensitization. We have developed and evaluated a liquid chromatography/mass spectrometry (LC-MS) method capable of quantifying HDI and its oligomers (uretidone, biuret, and isocyanurate) in air, tape-stripped skin, and paint samples collected in the automotive refinishing industry. To generate analytical standards, urea derivatives of HDI, biuret, and isocyanurate were synthesized by reaction with 1-(2-methoxyphenyl)piperazine and purified. The urea derivatives were shown to degrade on average by less than 2% per week at -20 degrees C over a 2 month period in occupational samples. The average recovery of HDI and its oligomers from tape was 100% and the limits of detection were 2 and 8 fmol microl(-1), respectively. Exposure assessments were performed on 13 automotive spray painters to evaluate the LC-MS method and the sampling methods under field conditions. Isocyanurate was the most abundant component measured in paint tasks, with median air and skin concentrations of 2.4 mg m(-3) and 4.6 microg mm(-3), respectively. Log-transformed concentrations of HDI (r = 0.79, p < 0.0001) and of isocyanurate (r = 0.71, p < 0.0001) in the skin of workers were correlated with the log-transformed product of air concentration and painting time. The other polyisocyanates were detected on skin for less than 25% of the paint tasks. This LC-MS method provides a valuable tool to investigate inhalation and dermal exposures to specific polyisocyanates and to explore relative differences in the exposure pathways.     

Brominated flame retardants in plasma samples from three different occupational groups in Norway

Brominated flame retardants (BFRs) are widely used in plastics, textile coatings, electrical appliances and printed circuit boards to prohibit the development of fires. In order to investigate how exposure to BFRs is related to specific occupations, samples were obtained from Norwegian individuals working at an electronics dismantling facility, in the production of printed circuit boards, or as laboratory personnel. Nine BFRs were quantified in the plasma samples: 2,4,4'-tribromodiphenyl ether (BDE-28), 2,2',4,4'-tetrabromodiphenyl ether (BDE-47), 2,2',4,4',5-pentabromodiphenyl ether (BDE-99), 2,2',4,4',6-pentabromodiphenyl ether (BDE-100), 2,2',4,4',5,5'-hexabromodiphenyl ether (BDE-153), 2,2',4,4',5,6'-hexabromodiphenyl ether (BDE-154), 2,2',3,4,4',5',6-heptabromodiphenyl ether (BDE-183), 2,4,6-tribromophenol (TriBP) and tetrabromobisphenol A (TBBP-A). The BFRs were extracted from plasma using solid-phase extraction (SPE). The plasma lipids were decomposed by treatment with concentrated sulfuric acid directly on the SPE column, prior to the elution of the BFRs. Following diazomethane derivatization, the samples were analysed by gas chromatography-electron capture mass spectrometry. The subjects working at the electronics dismantling plant had significantly higher plasma levels of TBBP-A and BDE-153 compared to the other groups, and the heptabrominated congener BDE-183 was only detected in plasma from this group. TriBP was generally the most abundant BFR present, and the plasma concentrations were in the range 0.17-81 ng g-1 lipids. BDE-47 was the dominant BDE congener in all the individual samples and the levels were in the range 0.43-14.6 ng g-1 lipids. The total amounts of the seven BDEs were 8.8, 3.9 and 3.0 ng g-1 lipids for the group of electronics dismantlers, circuit board producers and laboratory personnel, respectively. Generally, large variations in the individual concentration levels were found within the groups, especially in the group of electronics dismantlers, where the relative standard deviations for BDE concentrations were in the range 23-164%. The levels of BFRs were not correlated to age or the level of 2,2',4,4',5,5'-hexachlorobiphenyl (CB-153). The present work indicates that the population in Norway is exposed to several BFRs, probably with food as a major source. The elevated level of higher brominated BDEs and TBBP-A in the plasma from the workers at the dismantling plant suggests an additional occupational exposure for these individuals. Thus, human exposure to BFRs seems to originate from a combination of different sources; however, further studies investigating plasma samples from a larger number of individuals are necessary for a more complete assessment of human exposure pathways to these environmental contaminants.     

A combination of micro-porous membrane liquid-gas extraction and solid-phase trapping for ultra trace determination of benzene in urine

A method was developed for the determination of benzene in urine. The sample was pumped through the donor channel of a membrane extraction unit with a micro-porous membrane, separating the donor channel from an identical acceptor channel purged with nitrogen. The analyte reached the acceptor channel by diffusion through the membrane and was then swept by the carrier to a solid sorbent tube, where it was trapped. The analyte was subsequently thermally desorbed and analyzed by gas chromatography (GC) with mass selective detection (MS). After optimization, the recovery was close to quantitative, or 95%. Purging the membrane unit with pure water in between the samples eliminated any memory effects. The linearity was good in the concentration range examined (20-4000 ng l(-1)), with a correlation coefficient of 0.9996. The repeatability at 50 ng l(-1) and 400 ng l(-1) was 1.4% and 1.2%, respectively. The limit of detection was 12 ng l(-1) and the limit of quantification 35 ng l(-1). This enables assessment of benzene exposures of occupationally exposed subjects, of smokers and the majority of the general population. The developed method can be easily automated.     

Cigarette smoking and nickel exposure

The tobacco plant contains nickel and several other toxic metals, most probably absorbed from the soil, fertilizing products or from pesticides. It has been stated that nickel in a burning cigarette might form the volatile, gaseous compound, nickel tetracarbonyl, and thereby be introduced into the respiratory tract. Accordingly, the main objective of the present study was to find out if nickel content in inhaled smoke from ordinary cigarettes and nickel-contaminated cigarettes handmade by nickel process workers might be a supplementary source of nickel exposure to cigarette smoking process workers leading to additional risk of occupational respiratory cancer in these workers. Blood and urine samples from 318 randomly selected employees from Falconbridge Nickel Refinery in Kristiansand, Norway, allocated to 197 smokers and 121 non-smokers, were analysed for nickel content. Nickel quantities in tobacco from various cigarette brands, from nickel-contaminated cigarettes made by process workers or from cigarettes added known amounts of various nickel salts were analysed before being smoked. The cigarettes were smoked in a smoking machine device applying an electrostatic filter. Blood and urine, tobacco, ash and precipitates in the filter from the main stream smoke of the cigarettes were analysed for nickel quantities by atomic absorption spectrometry methods as previously described by the authors. The nickel concentrations in blood plasma and urine were quite similar among smokers and non-smokers, 6.2 and 48.1 microg L(-1) in smokers, and 6.4 and 50.5 microg L(-1) in non-smokers respectively. We recovered 1.1% or even less of nickel in the mainstream smoke after smoking the entire cigarettes without leaving any butt. Most of the tobacco nickel was recovered in the ash. We conclude that the inhaled nickel in the working atmosphere is probably the main source of the nickel exposure to the respiratory tract in these workers. It remains to be determined why cigarette smoking still seems to be a decisive cofactor in the development of respiratory tract cancer in nickel workers.     

Insecticide residues in soil and water in coastal areas of vegetable production in Togo

Some common organochlorine, organophosphorus and pyrethroid insecticides were analysed in agricultural soil samples (n?=?35) and surface water and groundwater samples (n?=?25) collected from coastal areas of vegetable production in Togo. Analytical methods included solvent extraction of the insecticide residues and their subsequent quantification using GC-ECD. δ-HCH, heptachlor epoxide, 4,4-DDE, endosulphan (α, β and sulphate), lambda-cyalothrin and chlorpyrifos were found in the soil samples with concentrations that varied from non-detectable (ND) to 26.93 μg kg^?1 dry weight. For water samples, heptachlor epoxide, 2,4-DDD, 4,4-DDD, 4,4-DDE and endosulphan (α, β, and sulphate) were found at contamination levels that varied from ND to 0.116 μg L^?1. The concentration of insecticide residues detected in the water samples was below the limits set by the World Health Organization (WHO) and also by the European Union (EU), with the exception of the concentration of endosulphan sulphate at the Aného site, which was 0.116 μg L^?1.