Mobilization of arsenic in aquifers from the Datong Basin,China: Evidence from geochemical and iron isotopic data

Iron isotope compositions of various Fe pools in aquifer sediments were measured at a known As-contaminated site in the Datong Basin, China. The δ⁵⁶Fe values of HCl-extracted poor-crystalline Fe(III) range widely from ?0.41‰ to 0.36‰. We interpret the low Fe(II)/Fe_Extractable ratios (<50%) and the negative correlation between Fe(II)/Fe_Extractable and δ⁵⁶Fe values in HCl-extracted poor-crystalline Fe to be best explained by redox cycling of Fe induced by microbial Fe(III) reduction. However, the high Fe(II)/Fe_Extractable ratios (?70%) and positive correlation between Fe(II)/Fe_Extractable and δ⁵⁶Fe values for HCl-extracted poor-crystalline Fe indicates production of sulfides (FeSs). The δ⁵⁶Fe values of crystalline Fe(III) extracted by reductant appears to be comparatively small varying from ?0.01‰ to 0.24‰, which is consistent with the δ⁵⁶Fe values for ferric oxides/hydroxides having undergone microbial Fe(III) reduction. The Fe isotope composition of various Fe pools shows the transformation between crystalline Fe(III) and poor-crystalline crystalline Fe(III) and the secondary Fe(II) phases has already occurred or is occurring in aquifer sediments. More importantly, there is a significant difference in the As concentrations in crystalline Fe(III) oxides/hydroxides and HCl-extracted Fe phases. The concentrations of As range from 1.6 to 29.9 mg kg^?1 and from 0.6 to 3.0 mg kg^?1, for crystalline Fe(III) and HCl-extracted Fe phases respectively. Accordingly, the transformation of Fe minerals induced by microbial Fe(III) reduction can contribute to the mobilization of As. This study is the first to examine the Fe isotope compositions in high As aquifer sediments; the results show that the Fe isotope would be an important tool in demonstrating the enrichment of As in groundwater.     

Iron isotopic fractionation in industrial emissions and urban aerosols

A study on tropospheric aerosols involving Fe particles with an industrial origin is tackled here. Aerosols were collected at the largest exhausts of a major European steel metallurgy plant and around its near urban environment. A combination of bulk and individual particle analysis performed by SEM–EDX provides the chemical composition of Fe-bearing aerosols emitted within the factory process (hematite, magnetite and agglomerates of these oxides with sylvite (KCl), calcite (CaCO₃) and graphite carbon). Fe isotopic compositions of those emissions fall within the range (0.08‰ < δ⁵⁶Fe < +0.80‰) of enriched ores processed by the manufacturer (−0.16‰ < δ⁵⁶Fe < +1.19‰). No significant evolution of Fe fractionation during steelworks processes is observed. At the industrial source, Fe is mainly present as oxide particles, to some extent in 3–4 μm aggregates. In the close urban area, 5 km away from the steel plant, individual particle analysis of collected aerosols presents, in addition to the industrial particle type, aluminosilicates and related natural particles (gypsum, quartz, calcite and reacted sea salt). The Fe isotopic composition (δ⁵⁶Fe = 0.14 ± 0.11‰) measured in the close urban environment of the steel metallurgy plant appears coherent with an external mixing of industrial and continental Fe-containing tropospheric aerosols, as evidenced by individual particle chemical analysis. Our isotopic data provide a first estimation of an anthropogenic source term as part of the study of photochemically promoted dissolution processes and related Fe fractionations in tropospheric aerosols.     

Sulfur and oxygen isotope tracing in zero valent iron based In situ remediation system for metal contaminants

In the present study, controlled laboratory column experiments were conducted to understand the biogeochemical changes during the microbial sulfate reduction. Sulfur and oxygen isotopes of sulfate were followed during sulfate reduction in zero valent iron incubated flow through columns at a constant temperature of 20 ± 1 °C for 90 d. Sulfur isotope signatures show considerable variation during biological sulfate reduction in our columns in comparison to abiotic columns where no changes were observed. The magnitude of the enrichment in δ³⁴S values ranged from 9.4‰ to 10.3‰ compared to initial value of 2.3‰, having total fractionation δS between biotic and abiotic columns as much as 6.1‰. Sulfur isotope fractionation was directly proportional to the sulfate reduction rates in the columns. Oxygen isotopes in this experiment seem less sensitive to microbial activities and more likely to be influenced by isotopic exchange with ambient water. A linear relationship is observed between δ³⁴S and δ¹⁸O in biotic conditions and we also highlight a good relationship between δ³⁴S and sulfate reduction rate in biotic columns.     

Compound specific carbon and hydrogen stable isotope analyses of volatile organic compounds in various emissions of combustion processes

This study presents carbon (δ¹³C) and hydrogen (δD) isotope values of volatile organic compounds (VOCs) in various emission sources using thermal desorption–gas chromatography–isotope ratio mass spectrometry (TD–GC–irMS). The investigated VOCs ranged from C6 to C10. Samples were taken from (i) car exhaust emissions as well as from plant combustion experiments of (ii) various C3 and (iii) various C4 plants. We found significant differences in δ values of analysed VOCs between these sources, e.g. δ¹³C of benzene ranged between (i) −21.7 ± 0.2‰, (ii) −27.6 ± 1.6‰ and (iii) −16.3 ± 2.2‰, respectively and δD of benzene ranged between (i) −73 ± 13‰, (ii) −111 ± 10‰ and (iii) −70 ± 24‰, respectively. Results of VOCs present in investigated emission sources were compared to values from the literature (aluminium refinery emission). All source groups could be clearly distinguished using the dual approach of δ¹³C and δD analysis. The results of this study indicate that the correlation of compound specific carbon and hydrogen isotope analysis provides the potential for future research to trace the fate and to determine the origin of VOCs in the atmosphere using thermal desorption compound specific isotope analysis.     

The stable carbon isotope composition of PM2.5 and PM10 in Mexico City Metropolitan Area air

The sources and distribution of carbon in ambient suspended particles (PM_2.5 and PM₁₀) of Mexico City Metropolitan Area (MCMA) air were traced using stable carbon isotopes (¹³C/¹²C). Tested potential sources included rural and agricultural soils, gasoline and diesel, liquefied-petroleum gas, volcanic ash, and street dust. The complete combustion of LP gas, diesel and gasoline yielded the lightest δ¹³C values (?27 to ?29‰ vs. PDB), while street dust (PM₁₀) represented the isotopically heaviest endmember (?17‰). The δ¹³C values of rural soils from four geographically separated sites were similar (?20.7 ± 1.5‰). δ¹³C values of particles and soot from diesel and gasoline vehicle emissions and agricultural soils varied between ?23 and ?26‰. Ambient PM samples collected in November of 2000, and March and December of 2001 at three representative receptor sites of industrial, commercial and residential activities had a δ¹³C value centered around ?25.1‰ in both fractions, resulting from common carbon sources. The predominant carbon sources to MCMA atmospheric particles were hydrocarbon combustion (diesel and/or gasoline) and particles of geological origin. The significantly depleted δ¹³C values from the industrial site reflect the input of diesel combustion by mobile and point source emissions. Based on stable carbon isotope mass balance, the carbon contribution of geological sources at the commercial and residential sites was approximately 73% for the PM₁₀ fraction and 54% for PM_2.5. Although not measured in this study, biomass-burning emissions from nearby forests are an important carbon source characterized by isotopically lighter values (?29‰), and can become a significant contributor (67%) of particulate carbon to MCMA air under the prevalence of southwesterly winds. Alternative sources of these ¹³C-depleted particles, such as cooking fires and municipal waste incineration, need to be assessed. Results show that stable carbon isotope measurements are useful for distinguishing between some carbon sources in suspended particles to MCMA air, and that wind direction has an impact on the distribution of carbon sources in this basin.     

Use of stable sulfur isotopes to identify sources of sulfate in Rocky Mountain snowpacks

Stable sulfur isotope ratios and major ions in bulk snowpack samples were monitored at a network of 52 high-elevation sites along and near the Continental Divide from 1993 to 1999. This information was collected to better define atmospheric deposition to remote areas of the Rocky Mountains and to help identify the major source regions of sulfate in winter deposition. Average annual δ³⁴S values at individual sites ranged from +4.0 to +8.2‰ and standard deviations ranged from 0.4 to 1.6‰. The chemical composition of all samples was extremely dilute and slightly acidic; average sulfate concentrations ranged from 2.4 to 12.2 μeq l⁻¹ and pH ranged from 4.82 to 5.70. The range of δ³⁴S values measured in this study indicated that snowpack sulfur in the Rocky Mountains is primarily derived from anthropogenic sources. A nearly linear relation between δ³⁴S and latitude was observed for sites in New Mexico, Colorado, and southern Wyoming, which indicates that snowpack sulfate in the southern part of the network was derived from two isotopically distinct source regions. Because the major point sources of SO₂ in the region are coal-fired powerplants, this pattern may reflect variations in the isotopic composition of coals burned by the plants. The geographic pattern in δ³⁴S for sites farther to the north in Wyoming and Montana was much less distinct, perhaps reflecting the paucity of major point sources of SO₂ in the northern part of the network.     

Sources of sodium in atmospheric fine particles

Concentrations of size fractionated particulate sodium and potassium were measured in both marine and urban air. Marine air sampling was conducted during a cruise on R/V Hakuho-maru in the northwestern North Pacific in the summer of 1998. Urban air sampling was performed in the central part of Tokyo in 1997 and 1998. The fine sodium concentration (D<1.1 μm) in “Urban” air (180 ng m⁻³) was 3 times higher than that in “Marine” air (56 ng m⁻³). In the urban air samples, the size distributions of sodium and potassium showed bimodal peaks in the fine particle range (D<1.1 μm) and in the coarse particle range (D>1.1 μm). The existence of anthropogenic sodium in the fine particle range was detected in the urban air. The K/Na weight ratios in the fine particle range of the urban air (1.8–2.7) was 50–75 times higher than that in seawater (0.036). Potassium in the urban air is thought to be derived largely from anthropogenic sources. In the urban air samples, a high correlation between fine sodium and fine potassium concentrations suggests that they have the same anthropogenic source. Reevaluating the K/Na ratios in marine air to be relatively higher than that in seawater, we can estimate that several percents of anthropogenic sodium can be transported from land to remote marine air.     

Influence of the surface microlayer on atmospheric deposition of aerosols and polycyclic aromatic hydrocarbons

Atmospheric dry deposition is an important process for the introduction of aerosols and pollutants to aquatic environments. The objective of this paper is to assess, for the first time, the influence that the aquatic surface microlayer plays as a modifying factor of the magnitude of dry aerosol deposition fluxes. The occurrence of a low surface tension (ST) or a hydrophobic surface microlayer has been generated by spiking milli-Q water or pre-filtered seawater with a surfactant or octanol, respectively. The results show that fine mode (<2.7 μm) aerosol phase PAHs deposit with fluxes 2–3 fold higher when there is a low ST aquatic surface due to enhanced sequestration of colliding particles at the surface. Conversely, for PAHs bound to coarse mode aerosols (>2.7 μm), even though there is an enhanced deposition due to the surface microlayer for some sampling periods, the effect is not observed consistently. This is due to the importance of gravitational settling for large aerosols, rendering a lower influence of the aquatic surface on dry deposition fluxes. ST (mN m⁻¹) is identified as one of the key factor driving the magnitude of PAH dry deposition fluxes (ng m⁻² d⁻¹) by its influence on PAH concentrations in deposited aerosols and deposition velocities (v_d, cm s⁻¹). Indeed, v_d values are a function of ST as obtained by least square fitting and given by Ln(v_d)=−1.77 Ln(ST)+5.74 (r²=0.95) under low wind speed (average 4 m s⁻¹) conditions.     

δ13C and δ15N of moss Haplocladium microphyllum (Hedw.) Broth. for indicating growing environment variation and canopy retention on atmospheric nitrogen deposition

Mosses have been recognized as a useful tool for biomonitoring atmospheric deposition and assessing regional environment. This study was carried on whether the same moss growing in areas with identical regional atmospheric deposition while under different growing environments would have the same indicating signals.Similar variations in mean δ¹³C and δ¹⁵N signatures were found between mosses collected from five habitats, with an increasing sequence from mosses under canopies to epilithic mosses, indicating that habitats were potentially regulating δ¹³C and δ¹⁵N values of mosses. Dryer habitats (lower water availability) and input of more aerosol N were the main reasons for higher δ¹³C and δ¹⁵N values of mosses at open sites (especially for epilithic species), while more negative values of mosses under canopies were attributed to their wetter habitats and less uptake of aerosol N. Additionally, δ¹⁵N values not δ¹³C varied linearly with canopy thickness from −7.84‰ (1 m) to −4.71±0.7‰ (4 m), suggesting δ¹⁵N was more sensitive for indicating canopy retention.Consequently, isotopic data of mosses under different environments could not be compared for atmospheric deposition research with each other even collected at the same site. Moss δ¹³C and δ¹⁵N were affected not only by regional atmospheric N sources but also by their growing environments. δ¹⁵N of epilithic Haplocladium microphyllum at open sites can be taken as confident bio-indicator of atmospheric N deposition, which would deepen the application of stable nitrogen isotope of bryophytes in atmosphere–plant system study.     

Zn isotope study of atmospheric emissions and dry depositions within a 5 km radius of a Pb–Zn refinery

The present paper examines the use of zinc isotopes as tracers of atmospheric sources and focuses on the potential fractionation of Zn isotopes through anthropogenic processes. In order to do so, Zn isotopic ratios are measured in enriched ores and airborne particles associated with pyrometallurgical activities of one of the major Pb–Zn refineries in France. Supporting the isotopic investigation, this paper also compares morphological and chemical characteristics of Zn particles collected on dry deposition plates (“environmental samples”) placed within a 5 km radius of the smelter, with those of Zn particles collected inside the plant (“process samples”), i.e. dust collected from the main exhaust system of the plant. To ensure a constant isotopic “supply”, the refinery processed a specific set of ores during the sampling campaigns, as agreed with the executive staff of the plant. Enriched ores and dust produced by the successive Zn extraction steps show strong isotope fractionation (from ?0.66 to +0.22‰) mainly related to evaporation processes within the blast furnaces. Dust from the main chimney displays a δ⁶⁶Zn value of ?0.67‰. Application of the Rayleigh equation to evaluate the fractionation factor associated with the Zn vapor produced after a free evaporation gives a range of α_ore/vapor from 1.0004 to 1.0008. The dry deposits, collected on plates downwind of the refinery, display δ⁶⁶Zn variations of up to +0.7‰. However, it is to be noted that between 190 and 1250 m from the main chimney of the refinery, the dry deposits show a high level of large (>10 μm) Zn, S, Fe and O bearing aggregates characterized by positive δ⁶⁶Zn values (+0.02 to +0.19‰). These airborne particles probably derive from the re-suspension of slag heaps and local emissions from the working-units. In contrast, from 1720 to 4560 m, the dry deposits are comprised of small (PM10) particles, including spherical Zn-bearing aggregates, showing negative δ⁶⁶Zn values (?0.52 to ?0.02‰). Our results suggest that the source of the distal dry fallouts is the main chimney plume, whose light Zn isotopic signature they preserve. Based on Zn isotopic analysis in combination with morphological and chemical characteristics of airborne particles, the present study suggests the traceability of smelter dusts by Zn isotopes.     

The composition and sources of PM2.5 organic aerosol in two urban areas of Chile

Fine particle (PM_2.5) samples were collected, using a charcoal diffusion denuder, in two urban areas of Chile, Santiago and Temuco, during the winter and spring season of 1998. Molecular markers of the organic aerosol were determined using GC/MS. Diagnostic ratios and molecular tracers were used to investigate the origin of carbonaceous aerosols. As main sources, road and non-road engine emissions in Santiago, and wood burning in Temuco were identified. Cluster analysis was used to compare the chemical characteristics of carbonaceous aerosols between the two urban environments. Distinct differences between Santiago and Temuco samples were observed. High concentrations of isoprenoid (30–69 ng m⁻³) and unresolved complex mixture (UCM) of hydrocarbons (839–1369 ng m⁻³) were found in Santiago. High concentrations of polynuclear aromatic hydrocarbons (751±304 ng m⁻³) and their oxygenated derivatives (4±2 ng m⁻³), and of n-alk-1-enes (16±13 ng m⁻³) were observed in Temuco.     

The effects of aging processes on critical supersaturation ratios of ultrafine carbon aerosols

The condensation properties of polydisperse aged ultrafine carbon aerosols (particle diameter<1 μm) have been investigated by means of a variable supersaturation condensation nucleus counter. The critical supersaturation (S_c), as the point, where 50% of all particles have been activated and grew to droplets was compared to the median dry particle diameter for pure carbon aerosols, benzo[a]pyrene-tagged carbon aerosols and external mixtures of the carbon particles with sodium chloride and sulphuric acid aerosols. Additionally, ozone as oxidising gaseous compound was added in some of the experiments. Simple coagulation of pure and benzo[a]pyrene-tagged carbon particles resulted in only slightly lower values for S_c due to the increased median particle diameter. The formation of soluble functionalities on the particle surface, i.e. the coagulation with the soluble sodium chloride and sulphuric acid aerosols or the chemical decomposition of benzo[a]pyrene into polar, hydrophilic products due to the reaction with ozone resulted in significant lower values for S_c for the modified carbon aerosol. The necessary supersaturations for the increased hydrophilic particles dropped to atmospherically relevant values of 3% after 5 h reaction time (benzo[a]pyrene decomposition) and 15 h (coagulation with soluble particles), respectively.     

Metal mobilization in soil by two structurally defined polyphenols

Polyphenols including tannins comprise a large percentage of plant detritus such as leaf litter, and affect soil processes including metal dynamics. We tested the effects of tannins on soil metal mobilization by determining the binding stoichiometries of two model polyphenols to Al(III) and Fe(III) using micelle-mediated separation and inductively coupled plasma optical emission spectroscopy (ICP-OES). By fitting the data to the Langmuir model we found the higher molecular weight polyphenol (oenothein B) was able to bind more metal than the smaller polyphenol (epigallocatechin gallate, EGCg). For example, oenothein B bound 9.43 mol Fe mol^?1, while EGCg bound 4.41 mol of Fe mol^?1. Using the parameters from the binding model, we applied the Langmuir model for competitive binding to predict binding for mixtures of Al(III) and Fe(III). Using the parameters from the single metal experiments and information about polyphenol sorption to soils we built a model to predict metal mobilization from soils amended with polyphenols. We tested the model with three natural soils and found that it predicted mobilization of Fe and Al with r² = 0.92 and r² = 0.88, respectively. The amount of metal that was mobilized was directly proportional to the maximum amount of metal bound to the polyphenol. The secondary parameter in each model was the amount of weak organically chelated Fe or Al that was in the soil. This study provides the first compound-specific information about how natural polyphenols interact with metals in the environment. We propose a model that is applicable to developing phytochelation agents for metal detoxification, and we discuss how tannins may play a role in metal mobilization from soils.     

Comparison of organic compositions in dust storm and normal aerosol samples collected at Gosan,Jeju Island,during spring 2005

To better understand the current physical and chemical properties of East Asian aerosols, an intensive observation of atmospheric particles was conducted at Gosan site, Jeju Island, South Korea during 2005 spring. Total suspended particle (TSP) samples were collected using pre-combusted quartz filters and a high-volume air sampler with the time intervals ranging from 3 h to 48 h. The kinds and amount of various organic compounds were measured in the samples using gas chromatography–mass spectrometry. Among the 99 target compounds detected, saccharides (average, 130 ± 14 ng m^?3), fatty acids (73 ± 7 ng m^?3), alcohols (41 ± 4 ng m^?3), n-alkanes (32 ± 3 ng m^?3), and phthalates (21 ± 2 ng m^?3) were found to be major compound classes with polyols/polyacids, lignin and resin products, PAHs, sterols and aromatic acids being minor. Compared to the previous results reported for 2001 late spring samples, no significant changes were found in the levels of their concentrations and compositions for 4 years, although the economy in East Asia, especially in China, has sharply expanded from 2001 to 2005. During the campaign at Gosan site, we encountered two distinct dust storm episodes with high TSP concentrations. The first dust event occurred on March 28, which was characterized by a predominance of secondary organic aerosols. The second event that occurred on the next day (March 29) was found to be characterized by primary organic aerosols associated with forest fires in Siberia/northeastern China. A significant variation in the molecular compositions, which was found within a day, suggests that the compositions of East Asian aerosols are heterogeneous due to multi-contributions from different source regions together with different pathways of long-range atmospheric transport of particles.     

Carbonaceous and inorganic composition in long-range transported aerosols over northern Japan: Implication for aging of water-soluble organic fraction

To better understand the influence of sources and atmospheric processing on aerosol chemical composition, we collected atmospheric particles in Sapporo, northern Japan during spring and early summer 2005 under the air mass transport conditions from Siberia, China and surrounding seas. The aerosols were analyzed for inorganic ions, organic carbon (OC), elemental carbon (EC), water-soluble organic carbon (WSOC), and the major water-soluble organic compound classes (i.e., dicarboxylic acids and sugars). SO₄^2? is the most abundant inorganic constituent (average 44% of the identified inorganic ion mass) followed by NH₄⁺ (21%) and NO₃^? (13%). Concentrations of OC, EC, and WSOC ranged from 2.0–16, 0.24–2.9, and 0.80–7.9 μg m^?3 with a mean of 7.4, 1.0, and 3.1 μg m^?3, respectively. High OC/EC ratios (range: 3.6–19, mean: 8.7) were obtained, however WSOC/OC ratios (0.23–0.69, 0.44) do not show any significant diurnal changes. These results suggest that the Sapporo aerosols were already aged, but were not seriously affected by local photochemical processes. Identified water-soluble organic compounds (diacids + sugars) account for <10% of WSOC. Based on some marker species and air mass back trajectory analyses, and using stable carbon isotopic compositions of shorter-chain diacids (i.e., C₂–C₄) as photochemical aging factor of organic aerosols, the present study suggests that a fraction of WSOC in OC is most likely influenced by aerosol aging, although the OC loading in aerosols may be more influenced by their sources and source regions.     

Size-resolved sulfate and ammonium measurements in marine boundary layer over the North and South Pacific

Marine background levels of non-sea-salt- (nss-) SO₄²⁻ (5.0–9.7 neq m⁻³), NH₄⁺ (2.1–4.4 neq m⁻³) and elemental carbon (EC) (40–80 ngC m⁻³) in aerosol samples were measured over the equatorial and South Pacific during a cruise by the R/V Hakuho-maru from November 2001 to March 2002. High concentrations of nss-SO₄²⁻ (47–94 neq m⁻³), NH₄⁺ (35–94 neq m⁻³) and EC (130–460 ngC m⁻³) were found in the western North Pacific near the coast of the Asian continent under the influence of the Asian winter monsoon. Particle size distributions of ionic components showed that the equivalent concentrations of nss-SO₄²⁻ were balanced with those of NH₄⁺ in the size range of 0.06<D<0.22 μm, whereas the concentration ratios of NH₄⁺ to nss-SO₄²⁻ in the size range of D>0.22 μm were decreased with increase in particle size. We estimated the source contributions of those aerosol components in the marine background air over the equatorial and South Pacific. Biomass burning accounted for the large fraction (80–98% in weight) of EC and the minor fraction (2–4% in weight) of nss-SO₄²⁻. Marine biogenic source accounted for several tens percents of NH₄⁺ and nss-SO₄²⁻. In the accumulation mode, 70% of particle number existed in the size range of 0.1<D<0.2 μm. In the size rage of 0.06<D<0.22 μm, the dominant aerosol component of (NH₄)₂SO₄ would be mainly derived from the marine biogenic sources.     

Relation between particle mass and number for submicrometer airborne particles

The relationship between particle mass and the number of ambient air particles for the submicrometer size range was examined using a tapered element oscillating microbalance (TEOM) to determine the mass concentration, and a scan-ning mobility particle sizer (SMPS) to determine the volume concentration and total number of particles. The techniques were validated through their application to the estimation of submicrometer particle density for two laboratory generated aerosols of known bulk density (sodium chloride and di-2-ethylhexyl-sebacate). Further evaluation was done with the submicrometer fraction of laboratory generated environmental tobacco smoke (ETS), for which the estimated density of 1.18±0.06 g/cm³ was very close to the previously reported literature value of 1.12 g cm³. Finally, ambient air particles were examined and an estimate of the average submicrometer particle densities for these aerosols was found to vary from 1.2 to 1.8 g cm^-3 depending on the time of day. This high variation in the density of the ambient air submicrometer particles, makes it hard to estimate the mass concentration from the SMPS number concentration with better than 60% uncertainty, based on an assumed density value.     

Biomagnification profiles of tributyltin (TBT) and triphenyltin (TPT) in Japanese coastal food webs elucidated by stable nitrogen isotope ratios

The measurement of organotins in the various biotas of coastal food webs with stable nitrogen isotope ratios (δ¹⁵N), which increase 3.4‰ per trophic level, can provide a biomagnification profile of organotins through food web. In this study, various biological samples were collected from three localities in Western Japan between 2002 and 2003 for analyses. Tributyltin (TBT) and triphenyltin (TPT) were still detected with a maximum of 99.5 and 8.7 ng wet weight g⁻¹, respectively. Unlike TBT, significant biomagnification of TPT through the food web (expressed by δ¹⁵N) was found in all three localities. The log transformed octanol–water partition coefficient (log K_ow) of TPT of 2.11–3.43 was overlapped by, but was slightly lower than, that of TBT of 3.70–4.70. Thus, this study demonstrates that although these chemicals have a log K_ow lower than 5, at least TPT undergoes significant biomagnification through the food web.     

Chemical characteristics of free tropospheric aerosols over the Japan Sea coast: aircraft-borne measurements

Atmospheric aerosol particulate matter was directly collected in the free troposphere over the Japan Sea coast between 1992 and 1994 using an aircraft-borne nine-stage cascade impactor (particle size range: 0.1–8 μm). The water-soluble components in the aerosol particulate matter were analyzed by ion chromatography. Particulate sulfate and ammonium were detected in most of the samples and their size distributions showed noticeable peaks below the 1 μm particle size range. Water-soluble calcium (Ca²⁺) was detected in half of the samples; the size distribution showed that the maximum particle size was larger than 1 μm. Highly concentrated Ca²⁺ in larger particles was possibly due to transport of Kosa aerosols from the Asian continent in the free troposphere. The concentration of fine particulate sulfate and ammonium tended to increase whenever Ca²⁺ was detected, which suggests possible mixing of Kosa aerosols and non-Kosa aerosols during long-range transport of air masses containing Kosa particles.     

Source apportionment of ambient PM2.5 at five spanish centres of the european community respiratory health survey (ECRHS II)

Fine particulate matter (PM_2.5) was sampled at 5 Spanish locations during the European Community Respiratory Health Survey II (ECRHS II). In an attempt to identify and quantify PM_2.5 sources, source contribution analysis by principal component analysis (PCA) was performed on five datasets containing elemental composition of PM_2.5 analysed by ED-XRF. A total of 4–5 factors were identified at each site, three of them being common to all sites (interpreted as traffic, mineral and secondary aerosols) whereas industrial sources were site-specific. Sea-salt was identified as independent source at all coastal locations except for Barcelona (where it was clustered with secondary aerosols). Despite their typically dominant coarse grain-size distribution, mineral and marine aerosols were clearly observed in PM_2.5. Multi-linear regression analysis (MLRA) was applied to the data, showing that traffic was the main source of PM_2.5 at the five sites (39–53% of PM_2.5, 5.1–12.0 μg m⁻³), while regional-scale secondary aerosols accounted for 14–34% of PM_2.5 (2.6–4.5 μg m⁻³), mineral matter for 13–31% (2.4–4.6 μg m⁻³) and sea-salt made up 3–7% of the PM_2.5 mass (0.4–1.3 μg m⁻³). Consequently, despite regional and climatic variability throughout Spain, the same four main PM_2.5 emission sources were identified at all the study sites and the differences between the relative contributions of each of these sources varied at most 20%. This would corroborate PM_2.5 as a useful parameter for health studies and environmental policy-making, owing to the fact that it is not as subject to the influence of micro-sitting as other parameters such as PM₁₀. African dust inputs were observed in the mineral source, adding on average 4–11 μg m⁻³ to the PM_2.5 daily mean during dust outbreaks. On average, levels of Al, Si, Ti and Fe during African episodes were higher by a factor of 2–8 with respect to non-African days, whereas levels of local pollutants (absorption coefficient, S, Pb, Cl) showed smaller variations (factor of 0.5–2).