Life cycle assessment of a pulverized coal power plant with post-combustion capture, transport and storage of CO2

In this study the methodology of life cycle assessment has been used to assess the environmental impacts of three pulverized coal fired electricity supply chains with and without carbon capture and storage (CCS) on a cradle to grave basis. The chain with CCS comprises post-combustion CO₂ capture with monoethanolamine, compression, transport by pipeline and storage in a geological reservoir. The two reference chains represent sub-critical and state-of-the-art ultra supercritical pulverized coal fired electricity generation. For the three chains we have constructed a detailed greenhouse gas (GHG) balance, and disclosed environmental trade-offs and co-benefits due to CO₂ capture, transport and storage. Results show that, due to CCS, the GHG emissions per kWh are reduced substantially to 243 g/kWh. This is a reduction of 78 and 71% compared to the sub-critical and state-of-the-art power plant, respectively. The removal of CO₂ is partially offset by increased GHG emissions in up- and downstream processes, to a small extent (0.7 g/kWh) caused by the CCS infrastructure. An environmental co-benefit is expected following from the deeper reduction of hydrogen fluoride and hydrogen chloride emissions. Most notable environmental trade-offs are the increase in human toxicity, ozone layer depletion and fresh water ecotoxicity potential for which the CCS chain is outperformed by both other chains. The state-of-the-art power plant without CCS also shows a better score for the eutrophication, acidification and photochemical oxidation potential despite the deeper reduction of SO_x and NO_x in the CCS power plant. These reductions are offset by increased emissions in the life cycle due to the energy penalty and a factor five increase in NH₃ emissions.     

A model for the CO2 capture potential

Global warming is a result of increasing anthropogenic CO₂ emissions, and the consequences will be dramatic climate changes if no action is taken. One of the main global challenges in the years to come is therefore to reduce the CO₂ emissions.Increasing energy efficiency and a transition to renewable energy as the major energy source can reduce CO₂ emissions, but such measures can only lead to significant emission reductions in the long-term. Carbon capture and storage (CCS) is a promising technological option for reducing CO₂ emissions on a shorter time scale.A model to calculate the CO₂ capture potential has been developed, and it is estimated that 25 billion tonnes CO₂ can be captured and stored within the EU by 2050. Globally, 236 billion tonnes CO₂ can be captured and stored by 2050. The calculations indicate that wide implementation of CCS can reduce CO₂ emissions by 54% in the EU and 33% globally in 2050 compared to emission levels today.Such a reduction in emissions is not sufficient to stabilize the climate. Therefore, the strategy to achieve the necessary CO₂ emissions reductions must be a combination of (1) increasing energy efficiency, (2) switching from fossil fuel to renewable energy sources, and (3) wide implementation of CCS.     

Nexus between renewable energy consumption,economic growth,and CO2 emissions in Algeria: New evidence from the Fourier-Bootstrap ARDL approach

Governments often impose new energy strategies to support new CO₂ emission-reducing technologies without affecting economic growth. Hence, this study aims to re-investigate the relationship between economic growth, renewable energy use, and CO₂ emissions in Algeria from 1990 to 2018. Motivated by the mixed findings of the existing literature, which ignore the Fourier function and bootstrap test and apply the newly developed Fourier bootstrap autoregressive distributed lag model (FARDL). Our findings indicate that renewable energy use and growth have a long-run relationship with CO₂ emissions and do not accept the existence of the Environmental Kuznets Curve (EKC) hypothesis for CO₂ emissions in Algeria. In the long term, the results show that renewable energy use has a negative and significant impact, and growth has a positive and statistically significant effect on CO₂ emissions. In the short run, the findings indicate that renewable energy use reduces CO₂ emissions, while both the growth and squared growth had positive and statistically insignificant impacts on CO₂ emissions, confirming the lack of evidence supporting the EKC hypothesis. Moreover, the causality test indicates a one-way causation from growth to renewable energy use, confirming the conservation hypothesis for Algeria and from growth to CO₂ emissions. Interestingly, we found one-way causality from CO₂ emissions to renewable energy use, attributing this to the fact that renewable energy usage has yet to reach a point that it can significantly cause a CO₂ emissions reduction. Based on the results, we recommend that policymakers design appropriate policies to decarbonize energy consumption, e.g., increasing fossil fuel costs and implementing a carbon tax. In contrast, Algeria should promote new CO₂ emission-reducing technologies without affecting economic growth, e.g., tax exemptions and reductions for enterprise owners in the renewable energy industry.     

Comparison of carbon capture and storage with renewable energy technologies regarding structural,economic, and ecological aspects in Germany

For the option of “carbon capture and storage”, an integrated assessment in the form of a life cycle analysis and a cost assessment combined with a systematic comparison with renewable energies regarding future conditions in the power plant market for the situation in Germany is done.The calculations along the whole process chain show that CCS technologies emit per kWh more than generally assumed in clean-coal concepts (total CO₂ reduction by 72–90% and total greenhouse gas reduction by 65–79%) and considerable more if compared with renewable electricity. Nevertheless, CCS could lead to a significant absolute reduction of GHG-emissions within the electricity supply system.Furthermore, depending on the growth rates and the market development, renewables could develop faster and could be in the long term cheaper than CCS based plants.Especially, in Germany, CCS as a climate protection option is phasing a specific problem as a huge amount of fossil power plant has to be substituted in the next 15 years where CCS technologies might be not yet available. For a considerable contribution of CCS to climate protection, the energy structure in Germany requires the integration of capture ready plants into the current renewal programs. If CCS retrofit technologies could be applied at least from 2020, this would strongly decrease the expected CO₂ emissions and would give a chance to reach the climate protection goal of minus 80% including the renewed fossil-fired power plants.     

Processing of Straw/Corn Stover: Comparison of Life Cycle Emissions

The LCA emissions from four renewable energy routes that convert straw/corn stover into usable energy are examined. The conversion options studied are ethanol by fermentation, syndiesel by oxygen gasification followed by Fischer Tropsch synthesis, and electricity by either direct combustion or biomass integrated gasification and combined cycle (BIGCC). The greenhouse gas (GHG) emissions of these four options are evaluated, drawing on a range of studies, and compared to the conventional technology they would replace in a western North American setting. The net avoided GHG emissions for the four energy conversion processes calculated relative to a “business as usual” case are 830 g CO₂e/kWh for direct combustion, 839 g CO₂e/kWh for BIGCC, 2,060 g CO₂e/L for ethanol production, and 2,440 g CO₂e/L for FT synthesis of syndiesel. The largest impact on avoided emissions arises from substitution of biomass for fossil fuel. Relative to this, the impact of emissions from processing of fossil fuel, e.g., refining of oil to produce gasoline or diesel, and processing of biomass to produce electricity or transportation fuels, is minor.     

Panel heterogeneous distribution analysis of trade and modernized agriculture on CO2 emissions: The role of renewable and fossil fuel energy consumption

In line with the global target of reducing climate change and its impact, this study explored the causal relationship between CO₂ emissions, modernized agriculture, trade openness, aggregate and disaggregate energy consumption in 14 African countries from 1990–2013 using a panel quantile estimation procedure. The empirical results showed that value addition to agricultural commodities declines CO₂ emissions in countries with high pollution levels. The study revealed a positive nexus between CO₂ emissions and energy consumption homogeneously distributed across quantiles. Trade openness was found to lower CO₂ emissions in countries with lower and higher levels of environmental pollution. While fossil fuel energy consumption was found to exacerbate CO₂ emissions, renewable energy consumption confirmed its mitigating effect on environmental pollution. The institution of climate‐smart agricultural options will sustainably increase productivity and income while adapting to climate change by reducing greenhouse gas emissions. Diversification of energy technologies with clean and modern energy sources like renewables avoid the over‐dependence on fossil fuels for agricultural purposes. Trade policies can stimulate flows of technology and investment opportunities for specialization in production and economies of scale. Hence, the consideration of policies that boost agricultural sector productivity and create an efficient market for international trade in Africa will help in improving livelihoods.     

How renewable energy and service growth influence environmental quality: Evidence from a sustainable development perspective

The present study inspects the relationships between the carbon dioxide (CO₂) emissions, real GDP, renewable and non-renewable energy consumption, as well as the service growth for top ten countries (TTC) in service activities. The empirical modeling used in the study involves the procedures of cointegration and tests of Granger causality to inspect the dynamic interaction between the variables during the period from 1980 to 2018. The results of the present study suggest that the variables are cross-sectionally dependent. In addition, the variables appear to be cointegrated based on several tests. The long-run outcomes revealed an inversed U-shaped form between emissions-GDP proving the validity of the environmental Kuznets curve assumption. The fully modified ordinary least squares and dynamic OLS estimates show that the non-renewable energy and economic growth contribute to the increase of CO₂ emissions, while service value-added leads to decrease emissions. Furthermore, the renewable energy coefficient comes through as negative but insignificant for the selected panel. The TTC in service should stimulate the usage of renewable energy in various service events for following the path of sustainable development. Devising the investment plans associated with the use of renewable energies is quite essential for the advancement of the service sector leading to mitigating emissions portion.     

Heterogeneous effects of urbanization and environment Kuznets curve hypothesis in Africa

This work explores the heterogeneous effect of urbanization and nonrenewable energy consumption on the environment in 54 African nations. Panel data were used from 1996 to 2019. For estimation, panel quantile regression analysis, augmented mean group, panel threshold regression, and the environment Kuznets curve hypothesis were applied to check the relationship between income and carbon emissions. The study's outcome demonstrates that urbanization and nonrenewable energy consumption degrade the environment in Africa. Furthermore, an inverted U-shape relationship exists between economic growth and CO₂ emissions, confirming the environmental Kuznets curve hypothesis. The findings indicate that urbanization should be planned; otherwise, urbanization can cause environmental degradation. African countries must adopt green urbanization and use renewable energy and clean manufacturing technologies. The institutions are encouraged to execute the standard, regulatory environment, and policies to reduce carbon emissions. Countries throughout the African continent should actively respond to the issues by charting a separate and diverse route for urban development.     

Causal interactions between environmental degradation,renewable energy,nuclear energy and real GDP: a dynamic panel data approach

Renewable energy as well as nuclear energy are low carbon power that presents the life cycle emissions of greenhouse gases than fossil fuel energy. However, analyzing the relationship between the consumption of renewable energy, consumption of nuclear energy, CO₂ emissions and economic growth is crucial for the economic and energy policy decision; we address this question for developed countries. This paper deals with the relationships between nuclear energy, environmental degradation, real GDP and renewable energy. We apply a panel data model for a global panel consisting of nine developed countries during the period 1990–2013. The group studied consists of Canada, France, Japan, Netherlands, Spain, Sweden, Switzerland, UK and the USA. The empirical findings suggest that: (1) a causal link between emissions and real income, (2) a unidirectional causality running from renewable energy to nuclear energy, (3) a unidirectional causal relationship running from capital to environmental degradation, (4) a unidirectional causal relationship running from income to nuclear energy consumption, since the growth hypothesis is valid, (5) a unidirectional causality running from capital to income, (6) no an outstanding role of renewable energy use in the contribution of CO₂ emissions.     

Carbon storage potential in natural fiber composites

The environmental performance of hemp based natural fiber mat thermoplastic (NMT) has been evaluated in this study by quantifying carbon storage potential and CO₂ emissions and comparing the results with commercially available glass fiber composites. Non-woven mats of hemp fiber and polypropylene matrix were used to make NMT samples by film-stacking method without using any binder aid. The results showed that hemp based NMT have compatible or even better strength properties as compared to conventional flax based thermoplastics. A value of 63 MPa for flexural strength is achieved at 64% fiber content by weight. Similarly, impact energy values (84–154 J/m) are also promising. The carbon sequestration and storage by hemp crop through photosynthesis is estimated by quantifying dry biomass of fibers based on one metric ton of NMT. A value of 325 kg carbon per metric ton of hemp based composite is estimated which can be stored by the product during its useful life. An extra 22% carbon storage can be achieved by increasing the compression ratio by 13% while maintaining same flexural strength. Further, net carbon sequestration by industrial hemp crop is estimated as 0.67 ton/h/year, which is compatible to all USA urban trees and very close to naturally, regenerated forests. A comparative life cycle analysis focused on non-renewable energy consumption of natural and glass fiber composites shows that a net saving of 50 000 MJ (3 ton CO₂ emissions) per ton of thermoplastic can be achieved by replacing 30% glass fiber reinforcement with 65% hemp fiber. It is further estimated that 3.07 million ton CO₂ emissions (4.3% of total USA industrial emissions) and 1.19 million m³ crude oil (1.0% of total Canadian oil consumption) can be saved by substituting 50% fiber glass plastics with natural fiber composites in North American auto applications. However, to compete with glass fiber effectively, further research is needed to improve natural fiber processing, interfacial bonding and control moisture sensitivity in longer run.     

Effective retrofitting of post-combustion CO2 capture to coal-fired power plants and insensitivity of CO2 abatement costs to base plant efficiency

Existing coal-fired power plants were not designed to be retrofitted with carbon dioxide post-combustion capture (PCC) and have tended to be disregarded as suitable candidates for carbon capture and storage on the grounds that such a retrofit would be uneconomical. Low plant efficiency and poor performance with capture compared to new-build projects are often cited as critical barriers to capture retrofit. Steam turbine retrofit solutions are presented that can achieve effective thermodynamic integration between a post-combustion CO₂ capture plant and associated CO₂ compressors and the steam cycle of an existing retrofitted unit for a wide range of initial steam turbine designs. The relative merits of these capture retrofit integration options with respect to flexibility of the capture system and solvent upgradability will be discussed. Provided that effective capture system integration can be achieved, it can be shown that the abatement costs (or cost per tonne of CO₂ to justify capture) for retrofitting existing units is independent of the initial plant efficiency. This then means that a greater number of existing power plants are potentially suitable for successful retrofits of post-combustion capture to reduce power sector emissions. Such a wider choice of retrofit sites would also give greater scope to exploit favourable site-specific conditions for CCS, such as ready access to geological storage.     

Electric Swing Adsorption for CO2 removal from flue gases

One of the most important sources of CO₂ emissions are the fossil-fuel fired plants for production of electricity. Removal of CO₂ from flue gas streams for further sequestration has been proposed by the International Panel on Climate Change experts as one of the most reliable solutions to mitigate anthropogenic greenhouse emissions. When natural gas is employed as fuel, the molar fraction of CO₂ in the flue gas is lower than 5% causing serious problems for capture. The purpose of this work is to present experimental validation of an Electric Swing Adsorption (ESA) technology that may be employed for carbon capture for low molar fractions of CO₂ in the flue gas streams. To improve energy utilization, an activated carbon honeycomb monolith with low electrical resistivity was employed as selective adsorbent. A mathematical model for this honeycomb is proposed as well as different ESA cycles for CO₂ capture.     

Electricity systems with near-zero emissions of CO2 based on wind energy and coal gasification with CCS and hydrogen storage

Emissions from electricity generation will have to be reduced to near-zero to meet targets for reducing overall greenhouse gas emissions. Variable renewable energy sources such as wind will help to achieve this goal but they will have to be used in conjunction with other flexible power plants with low-CO₂ emissions. A process which would be well suited to this role would be coal gasification hydrogen production with CCS, underground buffer storage of hydrogen and independent gas turbine power generation. The gasification hydrogen production and CO₂ capture and storage equipment could operate at full load and only the power plants would need to operate flexibly and at low load, which would result in substantial practical and economic advantages. This paper analyses the performances and costs of such plants in scenarios with various amounts of wind generation, based on data for power demand and wind energy variability in the UK. In a scenario with 35% wind generation, overall emissions of CO₂ could be reduced by 98–99%. The cost of abating CO₂ emissions from the non-wind residual generation using the technique proposed in this paper would be less than 40% of the cost of using coal-fired power plants with integrated CCS.     

Environmental policy stringency,renewable energy consumption and CO2 emissions: Panel cointegration analysis for BRIICTS countries

ABSTRACT

The aim of this paper is to investigate the relationship between environmental policy stringency and CO₂ emissions in BRIICTS (Brazil, Russia, India, Indonesia, China, Turkey and South Africa) for the period 1993–2014 after controlling for renewable energy, fossil energy, oil prices and income. We believe that this is the first attempt to use the recently OECD-developed environmental policy stringency index to test the effectiveness of environmental stringency policy in reducing CO₂ emission in these countries. Applying the Panel Pooled Mean Group Autoregressive Distributive Lag (PMG-ARDL) estimator, we found an inverted U–shaped relationship between environmental policy stringency and CO₂ emissions. This suggests that initially strict stringent environmental policy does not lead to improvements in the environment but after a certain level or a threshold point, environmental stringency policy leads to improvement in environmental quality. Renewable energy consumption was negatively related to CO₂ emissions while fossil energy consumption and real oil prices and income were positively and significantly related to CO₂. Our findings suggest that strengthening the stringency of environmental policies and promoting renewable energy are effective ways of preventing environmental degradation in BRIICTS countries.     

The decline of environmental degradation by renewable energy consumption in the MERCOSUR countries: an approach with ARDL modeling

The impact of consumption of renewable energy on CO₂ emissions was investigated, in five MERCOSUR’s countries from 1980 to 2014. The autoregressive distributed lag (ARDL) in the form of Unrestricted Error Correction Model to decompose the total effect of variables into it is the short- and long-run components. The results of preliminary tests showed the presence of cross-sectional dependence between the variables, the stationarity of all variables in the first differences, and the homogeneity in panel data. Moreover, the specification tests pointed to the presence of cross-sectional dependence, non-correlation between the crosses, serial correlation in the panel data model, and the existence of heteroskedasticity. The results of semi-elasticities (short run) and elasticities (long run) of ARDL model pointed that the economic growth and consumption of fossil fuels increase the CO₂ emissions in the short and long run, while the consumption of renewable energy reduces them. Despite the consumption of renewable energy reducing the environmental degradation in the MERCOSUR countries, its impact is small. Finally, this study proved that the consumption of renewable energy is able to reduce the CO₂ emissions, which is responsible for the environmental degradation in the MERCOSUR countries, and that the economic growth of these same countries increases the CO₂ emissions, along with the fact that all MERCOSUR countries are highly dependent of fossil fuels.     

Energy technology modelling of major carbon abatement options

The International Energy Agency Energy Technologies Perspectives (ETP) model is used to assess the prospects for carbon abatement options, including carbon capture and storage, up to 2050. Three main scenarios are considered: a Baseline scenario with current energy policies, an accelerated technology scenario that seeks to return energy-related CO₂ emissions in 2050 to their level in 2005, and a scenario for which CO₂ emissions are reduced at 50% of current levels by 2050. To reach these emissions reduction targets, annual global CO₂ emissions in the year 2050 must be reduced by 35 GtCO₂ to 48 GtCO₂ compared to the Baseline scenario. The analysis presented here shows that a broad portfolio of emissions reducing technologies will need to be deployed across all economic sectors of the global economy to reach these targets. Carbon dioxide capture and storage (CCS) is one of the suite of technologies employed across the globe to reach these targets. CCS adoption occurs in many aspects of the global economy and accounts for 14–19% of all emissions reductions. The total amount of CO₂ captured and stored in deep geologic reservoirs up to 2050 ranges between 5.1 GtCO₂ and 10.4 GtCO₂ in these two climate policy scenarios. Up to 2030, more than half of total CCS deployment takes place in OECD countries. After 2035, emerging economies account for more than half of total CCS use. This paper also demonstrates that as the climate policy becomes more stringent it will be necessary for CCS to deploy more extensively in many different industries outside of the electric power sector which often receives the most attention in discussions of CCS's role in addressing climate change.     

Global energy and emissions scenarios for effective climate change mitigation—Deterministic and stochastic scenarios with the TIAM model

The achievement possibilities of the EU 2 °C climate target have been assessed with the ETSAP TIAM global energy systems model. Cost-effective global and regional mitigation scenarios of carbon dioxide, methane, nitrous oxide and F-gases were calculated with alternative assumptions on emissions trading. In the mitigation scenarios, an 85% reduction in CO₂ emissions is needed from the baseline, and very significant changes in the energy system towards emission-free sources take place during this century. The largest new technology groups are carbon-capture and storage (CCS), nuclear power, wind power, advanced bioenergy technologies and energy efficiency measures. CCS technologies contributed a 5.5-Pg CO₂ annual emission reduction by 2050 and 12 Pg CO₂ reduction by 2100. Also large-scale forestation measures were found cost-efficient. Forestation measures reached their maximum impact of 7.7 Pg CO₂ annual emission reduction in 2080. The effects of uncertainties in the climate sensitivity have been analysed with stochastic scenarios.     

Toward a CO2 zero emissions energy system in the Middle East region

Climate change and energy security are global challenges requiring concerted attention and action by all of the world’s countries. Under these conditions, energy supplier and exporter countries in the Middle East region are experiencing further challenges, such as increasing domestic energy demand while energy exports have to concurrently be kept at high levels. Middle East countries process the largest proven oil and gas reserves in the world and contribute a large fraction of the world’s CO₂ emissions from the use of these as fuels both domestically and internationally. This paper addresses different policies that could dramatically change the future course of the Middle East region toward a zero CO₂ emission energy system. To this aim, an integrated energy supply–demand model has been developed to analyze required commitments including renewable energy and energy efficiency targets and the potential of nuclear power, all of which should need to be considered in order to reduce CO₂ emissions by 2100. The results indicate that nearly 43% of the global energy of the Middle East region can be supplied from non-fossil fuel resources in 2100.     

Toward sustainable use of natural resources: Nexus between resource rents,affluence, energy intensity and carbon emissions in developing and transition economies

Sustainable use of natural resources would entail ensuring that derived economic benefits today do not undermine the welfare of generations to come. On this basis, this study examines the nexus between natural resource rents and carbon dioxide (CO₂) emissions disaggregated into production and consumption-based (i.e., trade-adjusted) CO₂ emissions for a selected panel of 45 developing and transition economies over the period 1995–2017. The empirical model also incorporates the impacts of population, affluence, and energy intensity. The results show that affluence increases production-based CO₂ emissions by 1.407%, with the EKC's predicted inverted U-shaped curve only explaining consumption-based CO₂ emissions. Economic reliance on natural resource rents and energy intensification contribute 0.022% and 0.766%, respectively, to CO₂ emissions embedded in territorial production inventories and 0.035% and 0.583%, respectively, to CO₂ emissions embedded in consumption inventories. The bootstrap non-causality test shows that historical data on each variable has significant predictive power for future CO₂ emissions from both sources. The historical information about natural resource rents has significant predictive power over the future levels of affluence and energy intensity. Clearly, the results show that the environmental impact of natural resource rents is stronger when CO₂ emissions are adjusted for trade and varies among the countries, with Bangladesh, Guinea, India, Malaysia, Mexico, Nigeria, Pakistan, Saudi Arabia, Vietnam, and Zimbabwe among the most affected countries. Overall, this study provides motivation for policies to keep the use of natural resources within sustainable limits.