Is metal extraction by Arabidopsis halleri related to exchangeable metal rates in soils amended with different metal-bearing solids?

Metals are associated to various constituents in polluted soils, and their availability is closely related to their chemical speciation. Studies on relations between metal extraction efficiency by hyperaccumulators and location of metals with respect to soil constituents are scarce. In this study. we investigate the relationship between metal extraction by Arabidopsis halleri and the exchangeable metals from substrates amended with various metal-bearing solids collected in the vicinity of a Zn smelter complex. These consisted of fresh and decomposing organic matter, the soil clay fraction, and two types of waste slags. ZnSO4 was also used as metal-bearing solid. Each was mixed with an unpolluted soil to produce two types of substrate, one moderately polluted and the other highly polluted. Total Zinc, Cd, Cu, and Pb were measured in substrates and in roots and shoots of A. halleri. Analysis of 0.01 M CaCl2 exchangeable metals in each substrate was performed before and after plant growth. The results showed different concentrations of exchangeable metals after plant growth, depending on the nature of the metal-bearing solids. In the ZnSO4 soil substrate, the proportion of exchangeable Zn decreased after plant growth, whilst it increased significantly on substrates amended with the two waste slags. For the other substrates, exchangeable Zn was not significantly different before and after plant growth. The same trend was observed for Cd. In the case of Cu, exchangeable rates increased in all substrates. The results were discussed according to the characteristics of the metal-bearing solids and to the metal-uptake strategy of A. halleri.     

Filter materials for metal removal from mine drainage—a review

A large number of filter materials, organic and inorganic, for removal of heavy metals in mine drainage have been reviewed. Bark, chitin, chitosan, commercial ion exchangers, dairy manure compost, lignite, peat, rice husks, vegetal compost, and yeast are examples of organic materials, while bio-carbons, calcareous shale, dolomite, fly ash, limestone, olivine, steel slag materials and zeolites are examples of inorganic materials. The majority of these filter materials have been investigated in laboratory studies, based on various experimental set-ups (batch and/or column tests) and different conditions. A few materials, for instance steel slag materials, have also been subjects to field investigations under real-life conditions. The results from these investigations show that steel slag materials have the potential to remove heavy metals under different conditions. Ion exchange has been suggested as the major metal removal mechanisms not only for steel slag but also for lignite. Other suggested removal mechanisms have also been identified. Adsorption has been suggested important for activated carbon, precipitation for chitosan and sulphate reduction for olivine. General findings indicate that the results with regard to metal removal vary due to experimental set ups, composition of mine drainage and properties of filter materials and the discrepancies between studies renders normalisation of data difficult. However, the literature reveals that Fe, Zn, Pb, Hg and Al are removed to a large extent. Further investigations, especially under real-life conditions, are however necessary in order to find suitable filter materials for treatment of mine drainage.     

A review on fabricating functional materials by heavy metal–containing sludges

Environmental Science and Pollution Research - With the development of industry, sustainable use of natural resources has become a worldwide hot topic. Heavy metal–containing sludge (HMS) is...     

Separation and remediation of environmental pollutants using metal–organic framework-based tailored materials

Environmental Science and Pollution Research - Metal–organic frameworks (MOFs) are a polymer hybrid family of compounds comprising metal ions that have been deliberately incorporated in...     

Bioremediation of heavy metal–polluted environments by non-living cells from rhizobial isolates

Environmental Science and Pollution Research - Rhizosphere bacteria, for example, rhizobia, can play several roles, and one of the most important, the protection of plant roots against toxic...     

Do earthworms impact metal mobility and availability in soil? - A review

The importance of earthworms to ecosystem functioning has led to many studies on the impacts of metals on earthworms. Far less attention has been paid to the impact that earthworms have on soil metals both in terms of metal mobility and availability. In this review we consider which earthworms have been used in such studies, which soil components have been investigated, which types of soil have been used and what measures of mobility and availability applied. We proceed to review proposed reasons for effects: changes in microbial populations, pH, dissolved organic carbon and metal speciation. The balance of evidence suggests that earthworms increase metal mobility and availability but more studies are required to determine the precise mechanism for this.     

Pharmacological implications of ipriflavone against environmental metal–induced neurodegeneration and dementia in rats

Environmental Science and Pollution Research - Long-term exposure to environmental neurotoxic metals is implicated in the induction of dementia and cognitive decline. The present study aims to...     

Heavy metal–induced stress in eukaryotic algae—mechanisms of heavy metal toxicity and tolerance with particular emphasis on oxidative stress in exposed cells and the role of antioxidant response

Environmental Science and Pollution Research - Heavy metals is a collective term describing metals and metalloids with a density higher than 5 g/cm3. Some of them are essential...     

Superior photodecomposition of pyrene by metal ion-loaded TiO₂ catalyst under UV light irradiation

BACKGROUND: The photocatalytic degradation of pyrene under UV (125 W Hg-Arc, 10.4 mW/cm2) irradiation of TiO2 aqueous suspension has been found to be highly improved with the dissolved transition metal ions like Cu2+, Fe3+, Ag+, and Au3+, etc. As the reduction potential of these metals lies below the conduction band (CB) position (?0.1 eV) of TiO2, the photoexcited electron transfer occurs more readily and reduces electron–hole recombination rate. Therefore, it has a beneficial influence on the photocatalytic ability of TiO2 because of rapid Fermi energy equilibrium between the CB of TiO2 and its surface adsorbed metal ions. RESULTS AND DISCUSSION: The Fermi level is referred to as the electrochemical potential and plays an important role in the band theory of solids. When metal and semiconductor are in contact, electron migration from photoirradiated semiconductor to the deposited metal occurs at the interface until two Fermi levels equilibrate and enhanced the photocatalytic activity of semiconductor photocatalyst. Ni2+ having more negative reduction potential (?0.25 eV) than the CB of TiO2 imparts negligible co-catalytic activity to TiO2 photoreaction. It also revealed that loading of Au3+ ions displayed higher degradation rate of pyrene than Au photodeposition. Furthermore, when the amount of dissolved Fe+3 and Au3+ ions gradually increases from 0.1 to 2 wt.%, the pyrene photodecomposition rate also become faster.     

Assessing heavy metal pollution by biomonitoring honeybee nectar in Córdoba (Spain)

Environmental Science and Pollution Research - Nectar of honeybee colonies has been used in order to identify heavy metals and establish the benefit of this type of studies as a tool for...     

Persulfate activation by ferrocene-based metal–organic framework microspheres for efficient oxidation of orange acid 7

Environmental Science and Pollution Research - Ferrocene-based metal–organic framework with different transition metals (M-Fc-MOFs, M?=?Fe, Mn, Co) was synthesized by a simple...     

Investigation of metal ions binding of humic substances using fluorescence emission and synchronous‐scan spectroscopy

Abstract

The binding site interactions of IHSS humic substances, Suwannee River Humic Acid, Suwannee River Fulvic Acid, Nordic Fulvic Acid, and Aldrich Humic Acid with various metals ions and a herbicide, methyl viologen were investigated using fluorescence emission and synchronous‐scan spectroscopy. The metal ions used were, Fe(III), Cr(III), Cr(VI), Pb(II), Cu(II) and Ni(II). Stern‐Volmer constants, K_SV for these quenchers were determined at pH 4 and 8 using an ionic strength of 0.1M. For all four humic substances, and at both pH studied, Fe(III) was found to be the most efficient quencher. Quenching efficiency was found to be 3–10 times higher at pH 8. The bimolecular quenching rate constants were found to exceed the maximum considered for diffusion controlled interactions, and indicate that the fluorophore and quencher are in close physical association. Synchronous‐scan spectra were found to change with pH and provided useful information on binding site interactions between humic substances and these quenchers.     

Assessment of heavy metal concentrations in the food web of lake Beyşehir, Turkey

The accumulation of heavy metals (Cd, Pb, Hg and Cr) was measured by atomic absorption spectrophotometry in water, sediment, plankton and fish samples collected from Lake Bey?ehir, which is important bird nesting and visiting areas, and irrigation and drinking water sources. In Lake Bey?ehir, the accumulation orders of heavy metals were Cd>Pb>Cr>Hg in water, Pb>Cd>Cr>Hg in sediment, Pb>Cd>Cr>Hg in plankton, and Cd>Pb>Cr>Hg in the muscles and gills of chub, carp, tench, except for the muscle of pikeperch, in which it was Pb>Cd>Cr>Hg (P<0.05). In addition to this, accumulation orders of heavy metals in the food web was also found to be water>plankton>sediment>fish tissues, except for Cr. According to international criterias and Turkish regulations, heavy metal concentrations especially Cd and Pb in Lake Bey?ehir were markedly above the permissible levels for drinking water.     

In situ phytoremediation of heavy metal–contaminated soil and groundwater: a green inventive approach

Environmental Science and Pollution Research - The heavy metal contamination of soil and groundwater is a serious threat to environment worldwide. The survival of human being primarily relies upon...     

Kenneth Mellanby Review Award. Trace metal concentrations in aquatic invertebrates: why and so what?

All aquatic invertebrates take up and accumulate trace metals whether essential or not, and subsequent body concentrations of trace metals show enormous variability across metals and invertebrate taxa. Accumulated metal concentrations are interpreted in terms of different trace metal accumulation patterns, dividing accumulated metals into two components--metabolically available metal and stored detoxified metal. Crustaceans are used as examples of different accumulation patterns that will have a general applicability to all aquatic invertebrates. Toxicity is related to a threshold concentration of metabolically available metal and not to total accumulated metal concentration. The significance of accumulated metal concentrations is discussed in terms of the biological significance, including the attempted recognition of a high or low concentration, and of the applied use of aquatic invertebrates in biomonitoring programmes assessing geographical and temporal variation in trace metal bioavailabilities in aquatic systems.     

Enhanced photocatalysis using metal–organic framework MIL-101(Fe) for organophosphate degradation in water

Environmental Science and Pollution Research - Metal–organic frameworks (MOFs) are attractive novel classes of porous materials with diverse potentiality and easily tailored structures. It is...     

Vegetational and mycorrhizal successions at a metal polluted site: Indications for the direction of phytostabilisation?

Plant communities on plots with different metal pollution levels were compared in a field study in order to select the most suitable plant species for the direction of secondary succession toward the targeted grassland vegetation. The vegetational succession showed a gradual increase in plant cover and the number of plant species on the less polluted locations. Two predominant grass species Calamagrostis varia and Sesleria caerulea were selected for phytostabilisation, but a severely reduced seed germination capacity obstructed their use in practice. The mycorrhizal succession showed a gradual replacement of non-mycorrhizal with mycorrhizal plant species. Similar levels of arbuscular mycorrhizal colonisation of a particular plant species may be developed within each growing season regardless of the levels of pollution, with the exception of vesicle/intraradical spore formation. The results suggest that lower overall mycorrhizal colonisation levels and increased vesicle/spore formation may be a part of a mycorrhizal strategy at the most polluted locations.     

Is an adjusted rhizosphere-based method valid for field assessment of metal phytoavailability? Application to non-contaminated soils

Previously recommended rhizosphere-based method (RHIZO) applied to moist rhizosphere soils was integrated with moist bulk soils, and termed adjusted-RHIZO method (A-RHIZO). The A-RHIZO and RHIZO methods were systematically compared with EDTA, DTPA, CaCl2 and the first step of the Community Bureau of Reference (BCR1) methods for assessing metal phytoavailability under field conditions. Results suggested that moist bulk soils are equally suited or even better than rhizosphere soils to estimate metal phytoavailability. The A-RHIZO method was preferred to other methods for predicting the phytoavailability of Ni, Cu, Zn, Cd, Pb and Mn to wheat roots with correlation coefficients of 0.730 (P<0.001), 0.854 (P<0.001), 0.887 (P<0.001), 0.739 (P<0.001), 0.725 (P<0.001) and 0.469 (P<0.05), respectively. When including soil properties, other extraction methods were also able to predict phytoavailability reasonably well for some metals. Soil pH, organic matter and Fe-Mn oxide contents, and cation-exchange capacity mostly influenced the extraction and phytoavailability of metals.     

Sediment evidence of early eutrophication and heavy metal pollution of Lake Mälaren, central Sweden

Lake M?laren is the water supply and recreation area for more than 1 million people in central Sweden and subject to considerable environmental concern. To establish background data for assessments of contemporary levels of trophy and heavy metal pollution, sediment cores from the lake were analyzed. Diatom-inferred lake-water phosphorus concentrations suggest that pre-20th century nutrient levels in S?dra Bj?rkfj?rden, a basin in the eastern part of M?laren, were higher (c. 10-20 micrograms TP L-1) than previously assumed (c. 6 micrograms TP L-1). Stable lead isotope and lead concentration analyses from 3 basins (S. Bj?rkfj?rden, Gisselfj?rden and Ask?fj?rden) show that the lake was polluted in the 19th century and earlier from extensive metal production and processing in the catchment, particularly in the Bergslagen region. The lake has experienced a substantial improvement of the lead pollution situation in the 20th century following closure of the mining and metal industry. The lead pollution from the old mining industry was large compared to late-20th century pollution from car emissions, burning of fossil fuels and modern industries.