首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 15 毫秒
1.
Region-specific contaminant prioritisation is an important prerequisite for sustainable and cost-effective monitoring due to the high number of different contaminants that may be present. Surface water and sediment samples from the Sava River, Croatia, were collected at four locations covering a 150-km-long river section characterised by well-defined pollution gradients. Analysis of contaminant profiles along the pollution gradients was performed by combining toxicity screening using a battery of small-scale or in vitro bioassays, which covered different modes of action, with detailed chemical characterisation based on gas chromatography/mass spectrometry (GC/MS) and liquid chromatography/quadrupole time-of-flight mass spectrometry (LC-QTOF-MS). A large number of contaminants, belonging to different toxicant classes, were identified in both analysed matrices. Analyses of water samples showed that contaminants having polar character occurred in the highest concentrations, while in sediments, contributions from both non-polar and amphiphilic contaminants should be taken into account. Estimated contributions of individual contaminant classes to the overall toxicity indicated that, besides the classical pollutants, a number of emerging contaminants, including surfactants, pharmaceuticals, personal care products and plasticizers, should be taken into consideration in future monitoring activities. This work demonstrates the importance of the integrated chemical and bioanalytical approach for a systematic region-specific pollutant prioritisation. Finally, the results presented in this study confirm that hazard assessment in complex environmental matrices should be directed towards identification of key pollutants, rather than focusing on a priori selected contaminants alone.  相似文献   

2.

Background, aim, and scope  

Building up a comprehensive accurate monitoring program requires the knowledge on the contamination in principal, complemented by detailed information on individual contaminants. The selection of pollutants to be considered in monitoring actions is based dominantly on the information available about their environmental relevance (e.g., persistence, bioaccumulation potential, toxicological and ecotoxicological properties) and their occurrence within the affected environmental system. Therefore, this study focused on the identification of organic contaminants in selected German and European rivers to demonstrate the usefulness of a screening approach as complementary base for the compound selection process within monitoring activities.  相似文献   

3.
4.
A simple compressed-gas driven system for field processing and extracting water for subsequent analyses of hydrophobic organic compounds is presented. The pumping device is a pneumatically driven pump and filtration system that can easily clarify at 4 L/min. The extraction device uses compressed gas to drive filtered water through two parallel XAD-2 resin columns, at about 200 mL/min. No batteries or inverters are required for water collection or processing. Solvent extractions were performed directly in the XAD-2 glass columns. Final extracts are cleaned-up on Florisil cartridges without fractionation and contaminants analyzed by GC-MS. Method detection limits (MDLs) and recoveries for dissolved organic contaminants, polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs) and pesticides are reported along with results of surface water analysis for the San Francisco Bay, CA.  相似文献   

5.
6.
Green lipped mussels, Perna viridis, and blue mussels, Mytilus edulis, were collected from seven locations along the east coast of China in September and October 2001. The mussel tissues were analyzed for metals (Ag, As, Cd, Cr, Ni, Pb, Se, Zn, Cu, Fe and Hg), and trace organic contaminants including organochlorine compounds (OCs), polycyclic aromatic hydrocarbons (PAHs; based on 24 individual PAHs), polychlorinated biphenyls (PCBs) and petroleum hydrocarbons (PHCs). Maximum concentrations of Ag, As, Cd, Cr, Ni, Pb, Se, Zn, Cu, Fe and Hg in the mussel tissues were 0.14, 26.76, 5.31, 15.72, 4.78, 2.93, 7.40, 231.0, 54.17, 1002 and 317.3 microg/g dry weight respectively. Levels of DDTs, PAHs, PCBs and PHCs in the mussel samples were 14-640, 456-3495, 1-13 ng/g and 621-2863 microg/g dry weight, respectively. Results of this study indicated that contaminant levels were, in general, higher or at least comparable to those reported in other local or regional studies. Mussel samples collected in Chongming Dao in Shanghai and Jiao Zhou Wan in Qingdao had significantly higher levels of metal and trace organic contaminants among the seven sampling stations. Examination of the contaminant profiles suggests that PHCs originated from petrogenic sources, while both petrogenic and pyrolytic sources were important for PAHs. The generally high levels of metals and organochlorine compounds are probably the result of increasingly intense industrial activities along the east coast of China. An assessment of potential risks to human health due to consumption of the mussels was undertaken for the metals, PCBs, DDTs and chlordanes, and the results indicated that all metals, except Ni, could pose a health risk to heavy seafood consumers, while Hg appears to be of concern even for low level consumers.  相似文献   

7.
常规水处理工艺通常不能完全将水中新兴污染物(ECs)去除,残留的污染物仍然具有相当大的环境风险,如何有效地去除水中痕量新兴污染物是一个亟待解决的难题。本文概述了新兴污染物的来源、种类和危害,并分析了混凝工艺去除新兴污染物的可行性,重点介绍了新兴污染物性质、混凝剂种类和投加量、pH和水中溶解性物质对混凝效果的影响机制,并介绍了混凝与氧化、膜过滤及吸附等工艺的组合集成技术。在此基础上,对未来混凝技术去除新兴污染物的研究方向和发展趋势进行了展望。  相似文献   

8.
In this study, we compared microwave solvent extraction (MSE) to conventional methods for extracting organic contaminants from marine sediments and tissues with high and varying moisture content. The organic contaminants measured were polychlorinated biphenyl (PCB) congeners, chlorinated pesticides, and polycyclic aromatic hydrocarbons (PAHs). Initial experiments were conducted on dry standard reference materials (SRMs) and field collected marine sediments. Moisture content in samples greatly influenced the recovery of the analytes of interest. When wet sediments were included in a sample batch, low recoveries were often encountered in other samples in the batch, including the dry SRM. Experiments were conducted to test the effect of standardizing the moisture content in all samples in a batch prior to extraction. SRM1941a (marine sediment). SRM1974a (mussel tissue), as well as QA96SED6 (marine sediment), and QA96TIS7 (marine tissue), both from 1996 NIST Intercalibration Exercise were extracted using microwave and conventional methods. Moisture levels were adjusted in SRMs to match those of marine sediment and tissue samples before microwave extraction. The results demonstrated that it is crucial to standardize the moisture content in all samples, including dry reference material to ensure good recovery of organic contaminants. MSE yielded equivalent or superior recoveries compared to conventional methods for the majority of the compounds evaluated. The advantages of MSE over conventional methods are reduced solvent usage, higher sample throughput and the elimination of halogenated solvent usage.  相似文献   

9.
Passive sampling of dissolved pollutants in water has been gaining acceptance for environmental monitoring. Previously, an integrative passive sampler consisting of a C18 Empore disk receiving phase saturated with n-octanol and fitted with low density polyethylene membrane, was developed and calibrated for the measurement of time weighted average (TWA) concentrations of hydrophobic pollutants in water. In this study, the exchange kinetics were modelled to obtain a better understanding of the mechanism of the accumulation process and to enable the measurement of TWA concentrations of hydrophobic pollutants in the field. An empirical relationship that enables the calculation of in situ sampling rates of chemicals using performance reference compounds was derived and its application was demonstrated in a field study in which TWA aqueous concentrations estimated from sampler data for target analytes were compared with TWA concentrations obtained from spot samples of water collected regularly during the sampler deployment period.  相似文献   

10.
Since the so-called emerging contaminants were established as a new group of pollutants of environmental concern, a great effort has been devoted to the knowledge of their distribution, fate and effects in the environment. After more than 20 years of work, a significant improvement in knowledge about these contaminants has been achieved, but there is still a large gap of information on the growing number of new potential contaminants that are appearing and especially of their unpredictable transformation products. Although the environmental problem arising from emerging contaminants must be addressed from an interdisciplinary point of view, it is obvious that analytical chemistry plays an important role as the first step of the study, as it allows establishing the presence of chemicals in the environment, estimate their concentration levels, identify sources and determine their degradation pathways. These tasks involve serious difficulties requiring different analytical solutions adjusted to purpose. Thus, the complexity of the matrices requires highly selective analytical methods; the large number and variety of compounds potentially present in the samples demands the application of wide scope methods; the low concentrations at which these contaminants are present in the samples require a high detection sensitivity, and high demands on the confirmation and high structural information are needed for the characterisation of unknowns. New developments on analytical instrumentation have been applied to solve these difficulties. Furthermore and not less important has been the development of new specific software packages intended for data acquisition and, in particular, for post-run analysis. Thus, the use of sophisticated software tools has allowed successful screening analysis, determining several hundreds of analytes, and assisted in the structural elucidation of unknown compounds in a timely manner.  相似文献   

11.
Nitrogen removal processing in different constructed wetlands treating different kinds of wastewater often varies, and the contribution to nitrogen removal by various pathways remains unclear. In this study, the seasonal nitrogen removal and transformations as well as nitrogen balance in wetland microcosms treating slightly polluted river water was investigated. The results showed that the average total nitrogen removal rates varied in different seasons. According to the mass balance approach, plant uptake removed 8.4–34.3 % of the total nitrogen input, while sediment storage and N2O emission contributed 20.5–34.4 % and 0.6–1.9 % of nitrogen removal, respectively. However, the percentage of other nitrogen loss such as N2 emission due to nitrification and denitrification was estimated to be 2.0–23.5 %. The results indicated that plant uptake and sediment storage were the key factors limiting nitrogen removal besides microbial processes in surface constructed wetland for treating slightly polluted river water.  相似文献   

12.
Gas chromatographic-mass spectrometric (GC/MS) analysis of particulate matter of the Elbe river and its tributaries Havel, Spree and Mulde revealed a group of three dinaphthylsulfone isomers as sedimentary and suspended particulate matter (SPM) contaminants. The mass spectra of dinaphthylsulfones are characterized by the molecular ion (m/z 318), and the naphthyl fragment ion m/z 127. Losses of HSO(2) and C(10)H(7)O from the molecular ion lead to different mass spectra for each isomer. The gas phase infrared spectra exhibit isomer specific bands in the spectral region between 900 and 700 wave numbers. A synthetic mixture of dinaphthylsulfones was used for isomer identification and the assignment of the gas chromatographic retention behaviour of the dinaphthylsulfone isomers. Quantitative GC/MS analysis of dinaphthylsulfones in 44 sediment and SPM samples provided comprehensive information on the overall distribution and distinct sources of dinaphthylsulfones in the Elbe river drainage system. The results indicate emissions of these compounds over prolonged times and their environmental stability in anaerobic sediments.  相似文献   

13.
A new approach for the identification of suspect trace organic contaminants in drinking and surface waters is presented. Samples were initially analyzed using a target determination method for two contamination tracers, carbamazepine (CBZ) and atrazine (ATZ). This method used offline solid-phase extraction and online solid-phase extraction techniques coupled to liquid chromatography-triple quadrupole mass spectrometry to accelerate the sample preparation process and improve method performance. CBZ and ATZ were found respectively in 31% and 56% of the samples, and concentrations were usually <20 ng L−1. These samples were re-analyzed with a similar method on a quadrupole time-of-flight mass spectrometer to identify suspect contaminants by means of exact mass measurements and isotope patterns. A database of 264 common organic contaminants was built and used in conjunction with a Molecular Feature algorithm to identify the presence of these substances in drinking and surface water collected from different sources at various locations across Canada. Several organic contaminants were identified in the samples, but only the presence of caffeine, desethylatrazine, simazine and venlafaxine could be verified by comparison to pure standards. The presence of desethylatrazine was also confirmed by MS/MS experiments. These results suggest that target analysis for tracers of organic contamination may be a helpful tool to prioritize samples which should be further screened for suspect contaminants. This study also shows that the combination of separation techniques (offline and online SPE, LC) contribute to advance the applicability of high-resolution mass spectrometry for the identification of trace organic contaminants by accelerating the preparation step, reducing complexity and increasing analyte concentrations for optimal detection.  相似文献   

14.
Müller A  Schulz W  Ruck WK  Weber WH 《Chemosphere》2011,85(8):1211-1219
Non-target screening via high performance liquid chromatography-mass spectrometry (HPLC-MS) has gained increasingly in importance for monitoring organic trace substances in water resources targeted for the production of drinking water. In this article a new approach for evaluating the data from non-target HPLC-MS screening in water is introduced and its advantages are demonstrated using the supply of drinking water as an example. The crucial difference between this and other approaches is the comparison of samples based on compounds (features) determined by their full scan data. In so doing, we take advantage of the temporal, spatial, or process-based relationships among the samples by applying the set operators, UNION, INTERSECT, and COMPLEMENT to the features of each sample. This approach regards all compounds, detectable by the used analytical method. That is the fundamental meaning of non-target screening, which includes all analytical information from the applied technique for further data evaluation. In the given example, in just one step, all detected features (1729) of a landfill leachate sample could be examined for their relevant influences on water purification respectively drinking water. This study shows that 1721 out of 1729 features were not relevant for the water purification. Only eight features could be determined in the untreated water and three of them were found in the final drinking water after ozonation. In so doing, it was possible to identify 1-adamantylamine as contamination of the landfill in the drinking water at a concentration in the range of 20 ng L−1. To support the identification of relevant compounds and their transformation products, the DAIOS database (Database-Assisted Identification of Organic Substances) was used. This database concept includes some functions such as product ion search to increase the efficiency of the database query after the screening. To identify related transformation products the database function “transformation tree” was used.  相似文献   

15.
In the routine São Paulo state (Brazil) surface water quality-monitoring program, which includes the Salmonella microsome mutagenicity assay as one of its parameters, a river where water is taken and treated for drinking water purposes has repeatedly shown mutagenic activity. A textile dyeing facility employing azo-type dyes was the only identifiable source of mutagenic compounds. We extracted the river and drinking water samples with XAD4 at neutral and acidic pH and with blue rayon, which selectively adsorbs polycyclic compounds. We tested the industrial effluent, raw, and treated water and sediment samples with YG1041 and YG1042 and compared the results with the TA98 and TA100 strains. The elevated mutagenicity detected with YG-strains suggested that nitroaromatics and/or aromatic amines were causing the mutagenicity detected in the samples analyzed. Positive responses for the blue rayon extracts indicated that mutagenic polycyclic compounds were present in the water samples analyzed. The mutagen or mixture of mutagens present in the effluent and water samples cause mainly frameshift mutations and are positive with and without metabolic activation. The Salmonella assay combined with different extraction procedures proved to be very useful in the identification of the origin of the pollution and in the identification of the classes of chemical compounds causing the mutagenic activity in the river analyzed.  相似文献   

16.
平原河网结构改造与水体有机物自净效果的实验研究   总被引:2,自引:1,他引:2  
利用模拟实验开展了平原河流的水动力条件、河道宽深比、建筑物遮光效应和水温等因素对水体有机物长期降解过程的影响规律研究.结果显示,改善模拟河道的水动力条件,控制流速在1.5 m/h以上,可有效地减轻模拟河道有机物的污染现象及其在底泥中的积累速率;同时,控制模拟河道的宽深比在3.0左右,并最大限度地增加模拟河道的总体光照时间与光照强度,对水中有机物的降解十分有利.在相同的来水量下,不同的季节水中有机物的含量是不同的,模拟河道底部水温在10~15℃时,水体中有机物的含量最高,这也是河流最易发生黑臭的季节,此时可以配合城市内河置水工程,加大换水量及来水水质的管理.  相似文献   

17.
18.
An integrative passive sampler consisting of a C18 Empore disk receiving phase saturated with n-octanol and fitted with low-density polyethylene diffusion membrane was calibrated for the measurement of time-weighted average concentrations of hydrophobic micropollutants, including polyaromatic hydrocarbons and organochlorine pesticides, in water. The effect of temperature and water turbulence on kinetic and thermodynamic parameters characterising the exchange of analytes between the sampler and water was studied in a flow-through system under controlled conditions. It was found that the absorption of test analytes from water to the sampler is related to their desorption to water. This allows for the in situ calibration of the uptake of pollutants using offload kinetics of performance reference compounds. The sampling kinetics are dependent on temperature, and for most of the tested analytes also on the flow velocity. Sampler-water partition coefficients did not significantly change with temperature.  相似文献   

19.
The Guadiamar river basin has traditionally received pollutants from two main sources: in its northern section of mining origin, and in its southern section (next to Do?ana National Park) from urban-industrial and agricultural sources. In April 1998, the spill of 6 million m3 of mining wastes (acidic waters and sludge) severely polluted the Guadiamar river basin with heavy metals, which caused serious damage to the local ecosystem. There is a direct association between the physicochemical speciation of an element and its toxicity, biological activity, bioavailability, solubility, etc. This work describes a distribution study of the metals Zn, Cd, Pb and Cu by speciation analysis of surface waters in eleven sampling points of the Guadiamar river basin. Four metal fractions were determined using anodic stripping voltammetry: labile metal forms, H+ exchangeable metal forms, strongly inert forms (associated with organic and inorganic matter in solution), and forms associated with suspended matter. Total concentrations in surface waters followed the trend Zn > Cu > Pb > Cd. The speciation study showed that Zn and Cd were present to a large extent in available forms (labile and H+ exchangeable), while Pb and Cu were found mostly in the less available forms (strongly inert). Moreover, the available forms were found in the northern section (mining pollution) and the strongly inert forms in the southern section (urban, industrial and agricultural pollution). These results can illustrate the potential value of speciation to discern between different sources of pollution.  相似文献   

20.
Environmental Science and Pollution Research - Toxicological studies use “specialty chemicals” and, thus, should assess and report both identity and degree of purity (homogeneity) of...  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号