Biosorption of hexavalent chromium and malachite green from aqueous effluents,using Cladophora sp.

Biosorption potential of green macroalgae Cladophora sp., (GAC) for the removal of hexavalent chromium (Cr(VI)) and malachite green (MG) from aqueous medium was investigated. Optimal conditions for biosorption experiments were determined as a function of initial pH, GAC dosage, temperature and initial concentration of Cr(VI) and MG. The biosorption equilibrium data were fitted with the isotherm models of Langmuir, Freundlich, Kiselev, Frumkin and Jovanovic, while the experimental data were analysed using the kinetic models such as pseudo-first-order, pseudo-second-order, Ritchie's and intraparticle diffusion. The Langmuir maximum biosorption capacity was calculated as 100.00?mg/g (Cr(VI)) and 142.85?mg/g (MG). The biosorption kinetic data showed better agreement with the pseudo-second-order kinetic model. The thermodynamic parameters indicated spontaneous and endothermic nature of the biosorption process for Cr(VI) removal, whereas exothermic in the case of MG removal. Furthermore, the biosorption efficiencies of the GAC reusability were found significant up to five cycles and tested using 0.1, 0.5 and 1.0?M HCl, respectively. The results of the present study indicated that GAC is a suitable biosorbent for the sequestration of Cr(VI) and MG from aqueous solutions.     

Biosorption potential of Cr(VI) by Kocuria sp. ASB107, a radio-resistant bacterium isolated from Ramsar,Iran

Heavy metal pollution in soil and wastewater is a worldwide environmental issue in which microorganisms play a significant role for its removal. In the present study, biosorption of Cr(VI) by the live and dead cells of Kocuria sp. ASB107, a radio-resistant bacterium, was investigated. The effect of contact time, solution pH, initial hexavalent chromium concentration and adsorbent dose on biosorption efficiency was studied. Also, live cells were further immobilised on various matrices by different techniques and then were examined for tolerance to chromium biosorption. Experimental results indicated that the removal efficiency of chromium increased with decrease in pH, initial Cr(VI) concentration, and also increase in adsorbent dose and the contact time. The maximum removal efficiency of live and dead cells at acidic pH of 4–4.5, contact time of 24 hours, adsorbent dose 1.6?g/100?mL and initial chromium concentration 25?mg/L were 82.4% and 69.2%, respectively. The adsorption data was described well by Langmuir isotherm model. Among all immobilisation techniques tested, cross-linking showed the highest biosorption of Cr(VI). Results indicated that live cells of Kocuria sp. ASB107 were better than dead ones.     

Cr (VI) and Fe (III) removal using Cajanus cajan husk

Husk of tur dal (Cajanus cajan) was investigated as a new biosorbent for the removal of Fe (III) and Cr (VI) ions from aqueous solutions. Parameters like agitation time, adsorbent dosage and pH were studied at different initial Fe (III) and Cr (VI) concentrations. The biosorptive capacity of the Tur dal husk was dependent on the pH of the chromium and iron solution, with pH 2 and 2.5 respectively being optimal. The adsorption data fit well with Langmuir and Freundlich isotherm models. The practical limiting adsorption capacity (qmax) calculated from the Langmuir isotherm was 96.05 mg of Cr(VI)/ g of the biosorbent at an initial pH of 2.0 and 66.65 mg/g at pH 2.5. The infrared spectra of the biomass revealed that hydroxyl, carboxyl and amide bonds are involved in the uptake of Cr (VI) and Fe (III) ions. Characterisation of tur dal husk has revealed that it is an excellent material for treating wastewaters containing low concentration of metal ions.     

Kinetic and equilibrium models for the biosorption of Cr(III) on Streptomyces rimosus

This study focused on the biosorption of trivalent chromium onto mycelial bacterium (Streptomyces rimosus) biomass from effluent of tannery. The biomass was prepared by treatment with alkali. Fourier transforms-infra red analysis of the mycelial bacterial revealed the presence of carboxyl groups as possible binding sites. Experimental parameters affecting biosorption processes such as pH contact time were studied. Langmuir, Freundlich, and Temkin models were applied to describe the biosorption isotherms. The Langmuir model fitted the equilibrium data better than the Freundlich isotherm. The biosorption capacity of S. rimosus biomass for trivalent chromium was found to be 83 mg g^?1 at pH 4.8 and 3 g L^?1 biomass dosage, 300 min equilibrium time and 20°C. Kinetic evaluation of experimental data showed that the biosorption processes of trivalent chromium followed pseudo-second-order kinetics well.     

Removal of chromium(VI) by ZnCl2 activated coir pith carbon

The adsorption of chromium(VI) onto ZnCl₂ activated carbon developed from coir pith was investigated to assess the possible use of this adsorbent. The influence of contact time, adsorbent dose, Cr(VI) concentration, pH and temperature were investigated. The two theoretical adsorption isotherms, namely, Langmuir and Freundlich were used to describe the experimental results. The Langmuir adsorption capacity (Q ₀) was found to be 120.5?mg Cr(VI) per g of the adsorbent. The adsorption followed the second-order kinetics and was found to be maximum at pH 2.0. The pH effect and the desorption studies showed that ion exchange mechanism might be involved in the adsorption process. The effects of foreign ions such as chloride, sulphate, phosphate, selenite, molybdate, nitrate and perchlorate on the removal of Cr(VI) have been investigated. The removal of Cr(VI) from synthetic ground water was also tested. The results show that ZnCl₂ activated coir pith carbon is effective for the removal of Cr(VI) from water.     

Removal of toxic chromium(VI) from aqueous solution by activated carbon using Casuarina equisetifolia

Highly activated carbon from the seed husk of Casuarina Casuarinas equisetifolia, a worldwide famous plant, have been prepared and tested for the removal of toxic Cr(VI) from its aqueous solution. The adsorbent was investigated for influences of initial chromium concentration (75, 100, 125, and 150 mg l^-1), pH, contact time, and quantity of carbon on removal of Cr(VI) from aqueous solution at room temperature (25±2 °C). The adsorption kinetic of Cr(VI) was studied, and the rates of sorption were found to conform to pseudo-second-order kinetics with a good correlation (R²≥0.99). The Langmuir and Freundlich models fit the isotherm data well. Furthermore, the Gibbs free energy was obtained for each system and was found to be-5.29 kJ mol^-1 for removal of Cr(IV). The negative value of Δ G° indicates the feasibility and spontaneous nature of adsorption. The results indicate that acidic pH (1.05) supported the adsorption of Cr(IV) on activated carbon. The maximum adsorption capacity of Cr(VI) on activated carbon was about 172.4 mg g^-1 at pH 1.05.     

Chromium (VI) biosorption by immobilized Aspergillus niger in continuous flow system with special reference to FTIR analysis

Aspergillus niger was treated with acid and immobilized in calcium alginate matrix. The dynamic removal of Cr (VI) ion was studied using continuously fed column packed with immobilized biosorbent beads. Column experiments were carried out to study the effect of various bed heights (20, 30, 40 cm) under different flow rates (5, 7.5, 10 ml min(-1)) on efficiency of biosorption. The maximum time (1020 minutes; 17 hr) before breakthrough point was observed in case of 40 cm bed height with flow rate of 5ml min(-1). FTIR analysis of acid treated immobilized A. niger was used fora qualitative and preliminary analysis of chemical functional groups present on its cell wall which provided the information on nature of cell wall and Cr (VI) interaction during the process of biosorption. The IR spectra of biosorbent recorded before and after chromium biosorption had shown some changes in the band patterns, which were finally analyzed and was found that chemical interaction such as ion-exchange between carboxyl (-COOH), hydroxyl (-OH) and amine (-NH2) group of biosorbent and Chromium ion were mainlyinvolved in biosorption of Cr (VI) onto A. niger cell wall surface. The biosorbed metal was eluted from biosorbent by using 0.1 M H2SO4 as eluant. Immobilized biosorbent could be reused for five consecutive biosorption and desorption cycles without apparent loss of efficiency after its reconditioning. Considering all above factors together this paper discusses the efficient chromium biosorption process carried out by immobilized A. niger biosorbent.     

Concurrent adsorption and reduction of chromium(VI) to chromium(III) using nitrogen-doped porous carbon adsorbent derived from loofah sponge

• A high-efficiency N-doped porous carbon adsorbent for Cr(VI) was synthesized. • The maximum adsorption capacity of Cr(VI) reached up to 285.71 mg/g at 318K. • The potential mechanism for Cr(VI) adsorption by NHPC was put forward. • DFT analyzed the adsorption energy and interaction between NHPC and Cr(VI). To develop highly effective adsorbents for chromium removal, a nitrogen-doped biomass-derived carbon (NHPC) was synthesized via direct carbonation of loofah sponge followed by alkali activation and doping modification. NHPC possessed a hierarchical micro-/mesoporous lamellar structure with nitrogen-containing functional groups (1.33 at%), specific surface area (1792.47 m²/g), and pore volume (1.18 cm³/g). NHPC exhibited a higher Cr(VI) adsorption affinity than the HPC (without nitrogen doping) or the pristine loofah sponge carbon (LSC) did. The influence of process parameters, including pH, dosage, time, temperature, and Cr(VI) concentration, on Cr(VI) adsorption by NHPC were evaluated. The Cr(VI) adsorption kinetics matched with the pseudo-second-order model (R²≥0.9983). The Cr(VI) adsorption isotherm was fitted with the Langmuir isotherm model, which indicated the maximum Cr(VI) adsorption capacities: 227.27, 238.10, and 285.71 mg/g at 298K, 308K, and 318K, respectively. The model analysis also indicated that adsorption of Cr(VI) on NHPC was a spontaneous, endothermal, and entropy-increasing process. The Cr(VI) adsorption process potentially involved mixed reductive and adsorbed mechanism. Furthermore, computational chemistry calculations revealed that the adsorption energy between NHPC and Cr(VI) (−0.84 eV) was lower than that of HPC (−0.51 eV), suggesting that nitrogen doping could greatly enhance the interaction between NHPC and Cr(VI).     

Modelling the kinetics and equilibrium properties of cadmium biosorption by river green alga and water hyacinth weed

Cadmium biosorption properties of non-living, dried river green alga from a river source, and water hyacinth weed, Eichhornia crassipes from a lake in Zimbabwe have been investigated. The cadmium uptake was found to depend on initial pH, uptake being apparently minimal at low pH values and increasing with an increase in pH. Cadmium biosorption kinetics by both samples is fast, with 80% of total uptake occurring within 60?min. The effect of initial solution pH and initial cadmium concentration on cadmium biosorption from a cadmium solution has been studied. The data for algal biomass fitted the Langmuir monolayer adsorption isotherm, while the biosorption of the metal by water hyacinth weed fitted the Freundlich adsorption isotherm with 1/n values all less than 1. Maximum metal uptake capacities were recorded using 0.35?g of biomass and a 250?mg?L^?1 cadmium solution at pH 6.5 and at 25°C and these were about 85 and 50?mg?L^?1 for water hyacinth weed and green alga, respectively, showing that water hyacinth weed offered a greater potential for cadmium uptake. The absorption was described by pseudo-second order rate model and the rate constant and equilibrium sorption capacity are reported.     

Removal of Novacron Golden Yellow dye from aqueous solutions by low-cost agricultural waste: Batch and fixed bed study

The present work describes the removal of Novacron Golden Yellow (NGY) dye from aqueous solutions using peanut hulls. The experiments were performed with native, pretreated and immobilised forms of peanut hulls. The effect of various operational parameters (pH, biosorbent dose, initial dye concentration and temperature etc.) was explored during batch study. NGY showed maximum removal at low pH and low biosorbent dose. High initial dye concentration facilitated the biosorption process. Maximum dye removal with native, pretreated and immobilised biomass was found to be 35.7, 36.4 and 15.02 mg/g respectively. The experimental data were subjected to different kinetic and equilibrium models. The kinetic data confirmed the fitness of pseudo-second-order rate law for NGY biosorption. The equilibrium modelling was carried out by Freundlich, Langmuir and Temkin models. The isothermal data of NGY removal were best described by Freundlich adsorption isotherm. Negative values of Free energy change (Δ G⁰) for NGY with native and pretreated biomass depicted the spontaneous nature of biosorption process. In column mode, the effects of bed height, flow rate and initial dye concentrations were optimised. Maximum NGY biosorption (7.28 mg/g) was observed with high bed height, low flow rate and high initial concentration in continuous mode. Bohart–Adams model best fitted to the data obtained from column studies. The results indicated that the peanut hulls could be used effectively for the removal of dyes containing wastewater.     

A review for chromium removal by carbon nanotubes

Water pollution is still a serious problem for the entire world. Adsorption technology is a promising process which is based on the fabrication of novel, cheap, non-dangerous and highly sorptive materials for application in wastewater purification processes. Nanomaterials are functional groups which find use in many important fields such as medicine, food processing and agriculture. This review collects information from published works about the use of carbon nanotubes as efficient and promising adsorbents in chromium removal from (real or synthesised) wastewater. For this purpose, isotherm (Langmuir, Freundlich, etc.), kinetic (pseudo-first-, second-order, etc.), thermodynamic (free-energy Gibbs, enthalpy, entropy) and desorption–regeneration studies were discussed in detail. Moreover, significant factors such as pH, agitation time, temperature, adsorbent dosage and initial dye concentration are also reported extensively. The maximum monolayer adsorption capacities of Cr(III) and Cr(VI) ions were 0.39–238.09 and 1.26–370.3?mg/g, respectively. The absolute values of ΔG⁰ and ΔH⁰ ranged 0.237–48.62 and 0.16–58.43?kJ/mol, respectively.     

Biosorption of cadmium and nickel ions using marine macrophyte,Cymodocea nodosa

ABSTRACT

Seagrass (Cymodocea nodosa) ability to remove cadmium and nickel ions from single metal solutions was investigated in the present study. Metal ions were measured in the solution using an atomic absorption spectrophotometer. Various operational parameters (initial pH, biomass dose, metal ion concentration, and contact time) were tested and found to affect the uptake capacity of Cd (II) and Ni (II). More than 70% of biosorption capacity occurred in the first few minutes for both metal ions. The pseudo-second-order kinetic model and the Langmuir model were found to best fit the experimental data of Cd (II) and Ni (II) biosorption. The maximum uptake capacity (q_max) was 11.6 and 16.7?mg.g^?1 for Cd (II) and Ni (II), respectively. The biosorbent was characterised using Fourier transform infrared spectrometry (FTIR), scanning electron microscope (SEM), and energy-dispersive X-ray spectroscopy (EDX). The infrared spectrum demonstrated that hydroxyl, carboxyl, and phenolic functional groups are the major binding sites for Cd (II) and Ni (II) metals. The ion exchange mechanism plays an important role during biosorption process as shown in EDX analysis. Our results conclude that marine macrophyte C. nodosa can be used as a low-cost biosorbent for the removal of Cd (II) and Ni (II) in wastewater.     

Role of NADH-dependent chromium reductases,exopolysaccharides and antioxidants by Paenibacillus thiaminolyticus PS 5 against damage induced by reactive oxygen species

ABSTRACT

Cr (VI) being used in various activities of industries and its improper treatment lead to contamination of environment. Among different methods, biological is the most efficient method to control pollution from soils affected with metals. Present study was designed to assess the role of Paenibacillus thiaminolyticus PS5 for adsorption, Cr (VI) reduction and mechanism of reduction. Sorption of chromium (VI) by strain PS5 was obtained by batch equilibrium method. Cr (VI) reduction in both free and immobilised cells were evaluated by 1,5-Diphenyl Carbazide method. The formation of biofilm by Paenibacillus thiaminolyticus PS5 was observed for colour change as well as quantified spectrophotometrically. Analysis kits were used to measure the amount of eDNA, superoxide and malondialdehyde (MDA). Metal resistant strain PS5 was characterised as P. thiaminolyticus using 16S rRNA gene sequence. Maximum biosorption of Cr (VI) by strain PS5 was found at pH 6–8 and 100–400 µgCr/mL within 24 hours of incubation. Complete reduction of Cr (VI) by strain PS5 was achieved at pH 6–8 and100–300 µg/mL Cr (VI). Paenibacillus thiaminolyticus PS5 immmobilisation on sodium alginate and polyvinyl alcohol facilitated complete reduction of Cr (VI) within 18 hours due to the formation of more biofilm under metal stress conditions. Strain PS5 reduced almost all Cr (VI) into Cr (III) in supernatant, most of which was immobilised by cell debris. Experiments confirmed the reduction of Cr (VI) by cytosolic cell-free extracts which is a mechanism of detoxification. The release of exopolysaccharides and antioxidants by strain PS5 played a protective role against cell damage by Cr (VI) as Cr (VI) could not release the significant amount of eDNA, superoxide and MDA. The present study proved strain PS5 to be a super bioinoculant which has great capacity for adsorption, biotransformation and can activate cytosolic reductases, exopolysaccharides and antioxidants against oxidative damage.     

Biosorption of Cr(VI) from wastewater using Sorghastrum Nutans L. Nash

Sorghastrum Nutans L. Nash is used as an adsorbent for the removal of Cr(VI) from wastewater. Adsorption coupled reduction i.e. indirect reduction is the mechanism of Cr(VI) removal by the biomaterial. The adsorbent surface became highly positively charged at lower pH, adsorption rate of Cr(VI) is faster and reduction reaction also accelerates at lower pH since the binding of negatively charged Cr(VI) ion species to the cationic groups is enhanced and protons take part in this reaction. The adsorbent is characterised by using XRD, FTIR, SEM and EDAX analysis. OH bending, CN stretching/bending and NH stretching play a major role in Chromium adsorption. Experimental values follow pseudo-second order reaction and Langmuir adsorption isotherm. Surface diffusion is the rate controlling mechanism for the process. The maximum percentage of Cr(VI) removal obtained is 75.5% with 7?g/L dosage at pH 1.3 and adsorbate concentration was 100?mg/L. From the normal probability, residual, contour, 3D surface, main effect and interaction plot along with t-test, ANOVA, and F-test, it is observed that pH has the most significant effect on the percentage removal followed by adsorbent dosage and time. The adsorbate concentration has the least effects and interaction effects are found to be significant.     

酵母融合菌对铬离子的吸附特性研究

酵母融合菌的完整细胞、细胞壁、细胞内含物富集水体中的铬,比较了各组分对铬离子的吸附能力差异,并进行了模型拟合.结果表明:细胞壁的去除率和吸附量都明显高于完整细胞;完整细胞及细胞壁对铬的吸附均符合Freundlich和Langmuir热力学方程,且细胞壁对Cr6 的最大吸附量和吸附亲和力都大于完整细胞,说明细胞壁是该吸附剂吸附重金属离子的主要部位.同时利用多种分析手段研究了各组分对铬的吸附行为:酵母细胞壁的特殊结构以及AFM图显示细胞壁可以为活性基团吸附、络合或螯合金属离子提供更为广阔的空间;X-射线衍射和FTIR分析检测表明吸附剂对铬的吸附并未破坏其本身的结构.     

不同价态铬在不同水分条件下的生物有效性及其对水稻的毒性

氧化还原过程在铬的形态转化中起了重要作用,而铬形态的转化能够影响其生物有效性及毒性。通过温室土培试验研究了六价铬(Cr(Ⅵ))与三价铬(Cr(Ⅲ))在淹水与不淹水条件下在土壤溶液中的动态变化及水稻对其吸收的变化。结果表明,土壤中添加Cr(Ⅲ)时,土壤溶液中检测不出Cr;而随着土壤中添加Cr(Ⅵ)浓度的增加,土壤溶液中Cr(Ⅵ)的浓度增加,但是溶液中检测不出Cr(Ⅲ);淹水处理总体上降低了土壤溶液中Cr(Ⅵ)的浓度。而土壤添加Cr(Ⅲ)、Cr(Ⅵ)和水分处理对土壤溶液p H没有显著影响,p H在7.08.0之间变动。土壤添加Cr(Ⅵ)处理的水稻中,只有90 mg·kg-1Cr(Ⅵ)淹水处理的水稻成活,而其余处理水稻没有成活。土壤中添加Cr(Ⅲ)处理,水稻幼苗生物量随Cr(Ⅲ)浓度的增加而显著降低;除了200mg·kg-1Cr(Ⅲ)处理外,其余淹水处理的水稻幼苗生物量明显高于不淹水处理的。土壤添加Cr(Ⅲ)处理的水稻,在不淹水条件下水稻空壳率比较高,淹水条件下,随着土壤中添加Cr(Ⅲ)浓度水平的增加,水稻各部位Cr含量有增加的趋势,但增加不显著,秸秆最高Cr含量达到33.80 mg·kg-1,籽粒中Cr含量最高0.30 mg·kg-1。土壤固定Cr(Ⅲ)的能力远强于Cr(Ⅵ),添加Cr(Ⅵ)处理的土壤溶液中Cr(Ⅵ)的浓度很高,对水稻表现出较强的生长抑制。     

Removal of Cr(VI) from aqueous solutions by the culm of bamboo grass treated with concentrated sulfuric acid

We prepared a carbonaceous sorbent for Cr(VI) from the culm of Sasa kurilensis by dehydration with concentrated H₂SO₄. The removal of Cr(VI) by the sorbent was highly solution pH dependent and mainly governed by physicochemical sorption. The equilibrium data fit well in the Langmuir isotherm model and indicate the endothermic nature of the Cr(VI) sorption. The desorption experiments suggest that the Cr(VI) sorption is generally irreversible, owing to strong interaction of HCrO₄⁻ with the active sites of the sorbent.     

Biosorption of Cr(III) from aqueous solution by freeze-dried activated sludge: Equilibrium,kinetic and thermodynamic studies

Batch biosorption experiments were conducted to remove Cr(III) from aqueous solutions using activated sludge from a sewage treatment plant. An investigation was conducted on the effects of the initial pH, contact time, temperature, and initial Cr(III) concentration in the biosorption process. The results revealed that the activated sludge exhibited the highest Cr(III) uptake capacity (120 mg·g⁻¹) at 45°C, initial pH of 4, and initial Cr(III) concentration of 100 mg·L⁻¹. The biosorption results obtained at various temperatures showed that the biosorption pattern accurately followed the Langmuir model. The calculated thermodynamic parameters, ΔG^o (−0.8– −4.58 kJ·mol⁻¹), ΔH^o (15.6–44.4 kJ·mol⁻¹), and ΔS^o (0.06–0.15 kJ·mol⁻¹·K⁻¹) clearly indicated that the biosorption process was feasible, spontaneous, endothermic, and physical. The pseudo first-order and second-order kinetic models were adopted to describe the experimental data, which revealed that the Cr(III) biosorption process conformed to the second-order rate expression and the biosorption rate constants decreased with increasing Cr(III) concentration. The analysis of the values of biosorption activation energy (E_a = −7 kJ·mol⁻¹) and the intra-particle diffusion model demonstrated that Cr(III) biosorption was film-diffusion-controlled.     

Phytoextraction of Cr(VI) from soil using Portulaca oleracea

Cr(VI) represents an environmental challenge in both soil and water as it is soluble and bioavailable over a wide range of pH. In previous investigations, Portulaca oleracea (a plant local to the United Arab Emirates (UAE)) demonstrated particular ability for the phytoextraction of Cr(VI) from calcareous soil of the UAE. In this publication, the results of the evaluation of P. oleracea phytoextraction of Cr(VI) from UAE soil at higher concentrations are reported. P. oleracea was exposed to nine different concentrations of Cr(VI) in soil from 0 to 400 mg kg^?1. The uptake of Cr(VI) increased as its concentration in soil increased between 50 and 400 mg kg^?1, with the most efficient removal in the range from 150 to 200 mg kg^?1. The total chromium concentrations exceeded 4600 mg kg^?1 in roots and 1400 mg kg^?1 in stems, confirming the role of P. oleracea as an effective Cr(VI) accumulator. More than 95% of the accumulated Cr(VI) was reduced to the less toxic Cr(III) within the plant.     

Preparation and characterization of <Emphasis Type="Italic">β</Emphasis>-FeOOH-coated sand and its adsorption of Cr(VI) from aqueous solutions

Batch adsorption experiments were conducted to explore the adsorption of Cr(VI) in aqueous solutions by β-FeOOH-coated sand. We investigated the key factors which affected the adsorption process such as adsorbent dosage, initial pH, initial Cr(VI) ion concentration, contact time and temperature. The uptake of Cr(VI) was very rapid and 44.3%, 51.6%, 58.9% of the adsorption happened during the first 180 minutes at 293K, 303K and 313K, respectively. The pseudo-second-order rate equation successfully described the adsorption kinetics. To study the adsorption isotherm, two equilibrium models, the Langmuir and Freundlich isotherms, were adopted. At 293K, 303K and 313K, the adsorption capacities obtained from the Langmuir isotherm were 0.060, 0.070 and 0.076 mg Cr(VI) per gram of the adsorbent, respectively. Thermodynamic parameters such as the change of energy, enthalpy and entropy were calculated using the equilibrium constants. The negative value of ΔG ⁰ and the positive value of ΔH ⁰ showed that the adsorption of Cr(VI) in aqueous solutions by β-FeOOH-coated sand was spontaneous, endothermic and occurred by physisorption.