Soil washing treatability tests for pesticide-contaminated soil

The 1987 Sand Creek Operable Unit 5 record of decision (ROD) identified soil washing as the selected technology to remediate soils contaminated with high levels of organochlorine pesticides, herbicides, and metals. Initial treatability tests conducted to assess the applicability of soil washing technology did not effectively evaluate the removal of the elevated contaminant concentrations that were found. To further evaluate the applicability of soil washing at this industrial site, a second more comprehensive pilot-scale treatability test was conducted. Twenty-three test runs were conducted over a two-week period in late September 1992, using a pilot-scale soil washing device called the volume reduction unit (VRU). The experimental design evaluated the effects of two wash temperatures, two pH levels, three surfactants, four surfactant concentrations, and two liquid-to-soil ratios on the contaminant removal efficiency of the soil washing process. Site soils from layers at three different depths were used in the study. Results from the pilot-scale treatability test indicated that the VRU could achieve contaminant reduction efficiencies of 97 percent for heptachlor and greater than 91 percent for dieldrin in the uppermost contaminated soils (surface to 1-ft. depth). Residual concentrations of heptachlor and dieldrin in the treated soil ranged from 50 ppm to less than 1.6 ppm, and 6.8 ppm to less than 1.6 ppm, respectively. However, the analytical method detection limit of 1.6 ppm was not low enough to provide residual concentration data at the risk-based action levels of 0.55 ppm for heptachlor and 0.15 ppm for dieldrin.     

Thermal desorption of PCB-contaminated waste at the waukegan harbor superfund site

In June 1992, SoilTech ATP Systems, Inc., completed the soil treatment phase of the Waukegan Harbor Superfund Project in Waukegan, Illinois, after approximately five months of operation. SoilTech successfully treated 12,700 tons of sediment contaminated with polychlorinated hiphenyls (PCBs) using a transportable SoilTech anaerobic thermal processor (ATP) system nominally rated at ten tons per hour throughput capacity. The SoilTech ATP technology anaerobically desorbs contaminants such as PCBs from solids and sludges at temperatures over 1,000° F. Principal products of the process are clean, treated solids and an oil condensate containing the hydrocarbon contaminants. At the Waukegan Harbor Superfund site, PCB concentrations in the sediments excavated and dredged from a ditch, lagoon, and harbor slip averaged 10,400 parts per million (ppm) (1.04 percent) and were as high as 23,000 ppm (2.3 percent). Treated soil was backfilled in an on-site containment cell. The removal efficiency of PCBs from the soil averaged 99.98 percent, relative to the project performance specification of 97 percent, and treated soil PCB concentrations were measured below 2 ppm. Approximately 30,000 gallons of PCB oil, desorbed from the feed material, were returned to the owner for subsequent off-site disposal. After modifications to the emissions control equipment, compliance with the 99.9999 percent destruction and removal efficiency (DRE) for PCBs in stack emissions required by the U.S. Environmental Protection Agency was achieved.     

梨园杀虫剂的环境风险评价

评价了某雪花梨栽培试验园区施用的杀虫剂对周围环境的风险性。其中包括；利用化学物质排毒系数评价法对梨园杀虫剂进行初步风险识别；非突发性水环境污染风险分析。采用瞬时点源一维河流模型对杀虫剂因事故性泄漏水体造成的风险进行预测；简要说明了杀虫剂进入土壤的途径及其对施药区和非施药区土壤的危害；采用高斯烟团模式，通过大气取样，对杀虫剂超常量喷施进入大气捕捞浓度分布进行统计分析，测算出杀虫剂在不同浓度范围出现的相对频率，从而鉴别其对居民点空气质量的危害几率。     

Pesticide Impact Rating Index – A Pesticide Risk Indicator for Water Quality

Pesticide users, natural resource managers, regulators, government agencies and many others are concerned about the off-site impact of pesticides on the environment. Systematic methods of the assessment of potential risk of pesticides to environmental components can serve as valuable tools in decision making and policy formulation. Simple risk indicators have been developed which cover a range of scenarios such as toxicity to organisms, health of farm workers, consumer health, and residues in harvested produce. The authors have developed a software package named Pesticide Impact Rating Index (PIRI) that outputs an improved pesticide risk indicator for water quality. PIRI is a standalone, user-friendly, platform-independent program. It can be used to (i) rank pesticides in terms of their relative pollution potential to groundwater or surface water, and (ii) to compare different land uses in a catchment or at a regional scale in terms of their relative impact on water quality. It is based on pesticides use; the pathway through which the pesticides are released to the water resources (drift, runoff, erosion, leaching) and the value of the water resources threatened. Each component is quantified using pesticide characteristics (including toxicity to organisms at different trophic levels, i.e. fish, daphnia, algae, etc.), environmental and site conditions (e.g. organic carbon content of soil, water input, slope of land, soil loss, recharge rate, depth of water table, etc.). This paper describes two case studies of the application of PIRI in Australia. The comparison of the risk assessment by PIRI on these revealed that PIRI correctly estimated the pollution potential of pesticides in greater than 80% of cases. A GIS version of PIRI is described in a companion paper in this volume. An erratum to this article is available at .     

Economical and environmental implications of solid waste compost applications to agricultural fields in Punjab,Pakistan

Application of municipal solid waste compost (MSWC) to agricultural soils is becoming an increasingly important global practice to enhance and sustain soil organic matter (SOM) and fertility levels. Potential risks associated with heavy metals and phosphorus accumulations in surface soils may be minimized with integrated nutrient management strategies that utilize MSWC together with mineral fertilizers. To explore the economic feasibility of MSWC applications, nutrient management plans were developed for rice–wheat and cotton–wheat cropping systems within the Punjab region of Pakistan. Three-year field trials were conducted to measure yields and to determine the economic benefits using three management strategies and two nutrient doses. Management strategies included the application of mineral fertilizers as the sole nutrient source and application of mineral fertilizers in combination with MSWC with and without pesticide/herbicide treatments. Fertilizer doses were either based on standard N, P and K recommendations or on measured site-specific soil plant available phosphorus (PAP) levels. It was found that combining MSWC and mineral fertilizer applications based on site-specific PAP levels with the use of pesticides and herbicides is an economically and environmentally viable management strategy. Results show that incorporation of MSWC improved soil physical properties such as bulk density and penetration resistance. The PAP levels in the surface layer increased by the end of the trials relative to the initial status. No potential risks of heavy metal (Zn, Cd, Cr, Pb and Ni) accumulation were observed. Treatments comprised of MSWC and mineral fertilizer adjusted to site-specific PAP levels and with common pest management showed highest cumulative yields. A basic economic analysis revealed a significantly higher cumulative net profit and value-to-cost ratio (VCR) for all site-specific doses.     

Mobilization of iron and arsenic from soil by construction and demolition debris landfill leachate

Column experiments were performed to examine (a) the potential for leachate from construction and demolition (C&D) debris landfills to mobilize naturally-occurring iron and arsenic from soils underlying such facilities and (b) the ability of crushed limestone to remove these aqueous phase pollutants. In duplicate columns, water was added to a 30-cm layer of synthetic C&D debris, with the resulting leachate serially passed through a 30-cm soil layer containing iron and arsenic and a 30-cm crushed limestone layer. This experiment was conducted for two different soil types (one high in iron (10,400mg/kg) and the second high in iron (5400mg/kg) and arsenic (70mg/kg)); also monitored were control columns for both soil types with water infiltration alone. Despite low iron concentrations in the simulated C&D debris leachate, elevated iron concentrations were observed when leachate passed through the soils; reductive dissolution was concluded to be the cause of iron mobilization. In the soil containing elevated arsenic, increased iron mobilization from the soil was accompanied by a similar but delayed arsenic mobilization. Since arsenic sorbs to oxidized iron soil minerals, reductive dissolution of these minerals results in arsenic mobilization. Crushed limestone significantly reduced iron (to values below the detection limit of 0.01mg/L in most cases); however, arsenic was not removed to any significant extent.     

Case study: Using soil washing/leaching for the removal of heavy metal at the twin cities army ammunition plant

COGNIS TERRAMET® soil leaching and Bescorp soil washing systems have been successfully combined to remediate an ammunition test burn area at the Twin Cities Army Ammunition Plant (TCAAP), New Brighton, Minnesota. This cleanup is the first in the country to successfully combine these two technologies, and it offers a permanent solution to heavy metal remediation. Over 20,000 tons of soil were treated in the project. The cleaned soil remained on-site, and the heavy metal contaminants were removed, recovered, and recycled. Eight heavy metals were removed from the contaminated soil achieving the very stringent cleanup criteria of <175 ppm for residual lead and achieving background concentrations for seven other project metals (antimony, cadmium, chromium, copper, mercury, nickel, and silver). Initial contaminant levels were measured as high as 86,000 ppm lead and 100,000 ppm copper, with average concentrations over 1,600 ppm each. In addition, both live and spent ordnance were removed in the soil treatment plant to meet the cleanup criteria. By combining soil washing and leaching, COGNIS and Bescorp were able to assemble a process which effectively treats all the soil fractions so that all soil material can be returned on-site, no wastewater is generated, and the heavy metals are recovered and recycled. No hazardous waste requiring landfill disposal was generated during the entire remedial operation.     

Limitations on infiltration and reinjection of treated groundwater to remove trace amounts of pesticides in groundwater and soil

Infiltration and reinjection of treated groundwater have been used to increase the recovery of pesticide-related constituents at a pesticide formulation plant that produces consumer pesticide products. The stratigraphy at the site consists of silty and sandy clay deposits overlying a shallow silt, sand, and gravel aquifer. The groundwater and soils in two areas in the northwest portion of the property have been identified as being significantly affected by pesticide and pesticide-related compounds. An integrated system of soil removal, recovery wells, injection wells, an infiltration gallery, and a cut-off wall was selected as the best remedial alternative. Groundwater modeling, column tests, biological jar tests, and a pilot test demonstrated the feasibility of the system. The affected groundwater is treated to drinking-water quality by a system of filtering and carbon adsorption. Approximately 75 percent of the treated water is reinjected or allowed to infiltrate through the vadose zone, and the remainder is discharged to the local sewer system. Initially, the system was effective in removing the dissolved, suspended, and weakly adsorbed constituents. Subsequently, the recovery rate of the chemical constituents became dependent on chemical and physical processes related to the presence of residual amounts of dense, nonaqueous phase liquids and the clay content of the strata. The rate of pesticide recovery has decreased because of the retarding effect of the clay and the low solubility of the pesticides.     

基质固相分散萃取—气相色谱法测定土壤中有机氯农药含量

建立了一种基质固相分散萃取—气相色谱法测定土壤中8种有机氯农药含量的方法,优选了固相分散剂及其用量、洗脱溶剂以及土壤样品与分散剂的质量比。实验结果表明,在弗罗里硅土作为分散剂、正己烷和丙酮（体积比为1∶1）为洗脱溶剂、土壤样品与分散剂的质量比为1∶3的优化条件下,8种有机氯农药在50~250 μg/kg范围内表现出良好的线性关系,相关系数大于0.99,加标回收率为60.3%~94.3%,相对标准偏差为6.83%~8.95%。实际土壤质控样测试结果显示,本方法的测试结果在标准值的不确定度范围内,可满足土壤中有机氯农药残留的检测分析。     

Successful solid-phase bioremediation of petroleum-contaminated soil

Biological processes have been used to remediate petroleum hydrocarbons, pesticides, chlorinated solvents, and halogenated aromatic hydrocarbons. Biological treatment of contaminated soils may involve solid-phase, slurry-phase, or in situ treatment techniques. This article will review the general principle of solid-phase bioremediation and discuss the application of this technique for the cleanup of total petroleum hydrocarbons on two sites. These remedial programs will reduce total petroleum hydrocarbon contamination from the mean concentration of 2,660 ppm to under the 200-ppm cleanup criteria for soil and under the 15-ppm cleanup criteria for groundwater. Over 32,000 yards of soil have been treated by solid-phase treatment to date. The in situ system operation is effectively producing biodegradation in the subsurface. The project is approximately one-third complete.     

Assessment of in situ thermal treatment for chlorinated organic source zones

The East Gate Disposal Yard (EGDY) at Fort Lewis is the source of a large trichloroethene (TCE) plume at this military installation. Source reduction using thermal treatment was applied using electrical resistance heating. A total of about 5,800 kg of TCE‐equivalent volatile organic compounds (VOCs; TCE and dichloroethene) was extracted during thermal treatment of the three zones selected for source reduction. Pretreatment groundwater TCE concentrations were measured up to 100 ppm. Posttreatment groundwater TCE concentrations within the treatment zones averaged less than 100 ppb. Posttreatment soil TCE concentrations decreased by over 96 percent compared to pretreatment soil concentrations. The overall contaminant flux from EGDY was reduced by an estimated 60 to 90 percent by the source reduction effort. The traditional and new techniques for site characterization and remediation performance monitoring applied at EGDY provide insight for installing, operating, monitoring, and assessing thermal treatment. © 2009 Wiley Periodicals, Inc.     

Phytoremediation of arsenic‐contaminated soil as affected by the chelating agent CDTA and different levels of soil pH

Elevated levels of arsenic can pose a major threat to both human health and the environment. The phytoremediation of heavy metals from soil is emerging as a cost‐effective technology for the remediation of contaminated soils. The present greenhouse study was undertaken to identify plants capable of tolerating and accumulating high concentrations of arsenic. Asparagus fern and rye grass were found to tolerate and accumulate more than 1,100 ppm of arsenic in plant tissue. Arsenic uptake as affected by different levels of the chelating agent trans‐1, 2‐ cyclohexylenedinitrilotetraacetic acid (CDTA) and soil pH were also studied. The application of 5 mmol kg^?1 of CDTA to arsenic‐contaminated medium loam field soil enhanced the accumulation of arsenic by the test plants. Under these conditions, plants accumulated up to 1,400 ppm of arsenic as compared to 950 ppm by the plants grown in soil containing 1,200 ppm of arsenic but without any amendment of the chelating agent. Plants grown in field soil of pH 5 containing 300 ppm of arsenic absorbed higher concentrations of arsenic than at other tested pH levels. Corresponding reductions in arsenic content of soil after plant harvests were observed. © 2001 John Wiley & Sons, Inc.     

Current pesticide practices and environmental issues in Vietnam: management challenges for sustainable use of pesticides for tropical crops in (South-East) Asia to avoid environmental pollution

Pesticides are widely used in modern agriculture to minimize financial losses and maintain food supplies. In southeast Asia, where agriculture is the principal economic activity, pesticides are considered essential, particularly in tropical regions seeking to enter the global economy by providing off-season fresh fruits and vegetables. The absence of a strong legal framework for pesticides facilitated a significant increase in the use of low-quality pesticides. Farmers ignore the risks, safety instructions, and protective directives when using pesticides. They are only concerned about the effectiveness of the pesticides for killing pests, without paying attention to the effects on their health and the environment. The improper usage of pesticides and the incorrect disposal of pesticide wastes contributed to the pollution of groundwater, surface water, and soil, and induced health problems in local communities. This paper describes the impact of the exposure of pesticides on human health and water resources in connection with the usage of pesticides and their management. Because of availability, the data are mainly taken for Northern Vietnam, and applied to the water quality in the delta; nevertheless, the problem relates to all countries in the delta, and similar situations may be found in other regions, particularly in Asia.     

Leachate migration from spent mushroom substrate through intact and repacked subsurface soil columns

Field weathering of spent mushroom substrate (SMS) produces soluble compost leachate that percolates into underlying soils and may adversely impact groundwater. Laboratory experiments were conducted to investigate movement and retention of SMS leachate solutes in subsurface soil columns. Spent mushroom substrate leachate with high concentrations of dissolved organic matter (DOM) and inorganic salts was passively loaded to intact and repacked columns of Bt1 soil (fine-loamy, mixed, semiactive, mesic Typic Hapludults) and effluents were monitored for changes in chemical composition. Transport of SMS leachate in undisturbed soil cores was mainly via preferential flow, whereas matrix flow was predominant in repacked soil columns. Leachate DOM and phosphate were sorbed by soil minerals while Cl-, SO4(2-), Na+ and NH4+ were eluted. Leachate K+ displaced exchangeable native cations and was retained. Biodegradation of leachate DOM resulted in reduction and elution of soil Mn and Fe, especially in repacked columns. Persistent anoxia also inhibited nitrification. Precipitation of gypsum and CaCO3 blocked preferential flow channels, and movement of SMS leachate was subsequently reduced. The results demonstrate that SMS leachate migrates via rapid preferential flow initially, followed by matrix flow at a lower rate. Leachate solutes may transport to depth in soil profiles through preferential channels. To protect water resources, weathering of deep SMS piles should be conducted on compact surfaces or in fields with a condensed soil layer (no structural cracks) above the groundwater table, and measures controlling leachate runoff be imposed.     

Release of nitrogen and trace metal species from field stacked biosolids

Concerns over elevated nitrate (NO3-) levels found in groundwater near former biosolid stockpiling locations resulted in the Maine Department of Environmental Protection (MDEP) imposing stricter regulations governing the stockpiling of biosolids in October 2002. The goals of this study were to measure the amount and speciation of nitrogen (N) and trace metals leaving stockpiled biosolids and travelling through the soil column. The biosolids were placed on plastic-lined cells to collect all leachate. Ammonium (NH4+), ranging from 2000 to 4900 mg L(-1), was the dominant N species (90% of total N) in the leachate from the Class B lime-stabilized biosolids in the lined cell experiment. Nitrate (NO3-) and nitrite (NO2-) concentrations were negligible, remaining below 0.25 and 0.1 mg L(-1), respectively. Dissolved organic carbon (DOC) concentrations as high as 8900 mg L(-1) and chemical oxygen demand (COD) as high as 37 000 mg L(-1) were measured in the leachate leaving the lined cell. Fifteen zero-tension pan lysimeters (ZTP-lysimeter) were installed in a 90 m2 plot at depth intervals of 30, 60, and 100 cm. Leachate passing through the soil column underlying the biosolids stockpile was collected in the ZTP-lysimeters. The average ZTP-lysimeter NH4+ concentrations ranged from 1400 mg L(-1) at 60 cm depth to 145 mg L(-1) at 90 cm depth. The average ZTP-lysimeter DOC concentrations ranged from 2000 mg L(-1) at 60 cm to 525 mg L(-1) at 90 cm. Trace metal determinations of the leachate collected from the lined cell and ZTP-lysimeters showed arsenic loading rates exceeded the state limits of 0.5 kg ha(-1) year(-1) by an order of magnitude. Arsenic concentrations were in excess of several thousand milligrams per litre in the lined-cell leachate and several hundred milligrams per litre in the ZTP-lysimeters as deep as 90 cm under the biosolid stockpile. Phosphorus, iron and manganese in excess of several thousand milligrams per litre were observed in both the lined-cell leachate and ZTP-lysimeters. Significant concentrations of other trace metals were found at depth in the zero-tension ZTP-lysimeter plot. Trace metals were largely mobilized by the DOC from the biosolids and due to the presence of anaerobic environment, especially in the underlying soil.     

Remediation of DDT‐contaminated soil using optimized mixtures of surfactants and a mixing system

Soil contaminated with persistent pesticides, such as DDT, poses a serious risk to humans and to wildlife. A surfactant‐aided soil‐washing technique was studied as an alternative method for remediation of DDT‐contaminated soil. An ex situ soil washing method was investigated using nonionic and anionic surfactants due to the clayey structure of the contaminated soil. A mixture of 1 percent nonionic surfactant (Brij 35) and 1 percent anionic surfactant (SDBS) removed more than 50 percent of DDT from soil in a flow‐through system, whereas individual surfactants or other combinations of the surfactants had a lower removal efficiency. The soil‐washing technique was improved using a mixing system. The mixture of surfactants was optimized in the mixing system, and the combination of 2 percent Brij 35 and 0.1 percent SDBS was found to be optimum, removing 70 to 80 percent of DDT. Prewashing of the soil with tap water decreased the adsorption of surfactants to soil particles by 30 to 40 percent, and postwashing recovered 90 percent of the surfactants. © 2010 Wiley Periodicals, Inc.     

Regional Assessment of Nutrient and Pesticide Leaching in the Vegetable Production Area of Rattaphum Catchment, Thailand

Regional groundwater vulnerability maps to indicate the impact of leaching of chemicals under different management scenarios were prepared for the Rattaphum Catchment using several leaching models and GIS techniques. The Attenuation Factor (AF) model was used to simulate the leaching potential of several pesticides for selected soils in the catchment under different rates of recharge from irrigation. The LEACHN model was used to simulate the NO₃ ⁻ leaching potential and LEACHP was used to simulate leaching potential of metolachlor under different management scenarios. The results showed that only a small number of pesticides have the potential to contaminate the shallow groundwater. However, the risk of contamination with nutrients is much higher due to the mobility and conservative nature of the NO₃ ⁻. The LEACHP results indicated that the intensive use of agrochemicals in the vegetable growing area, especially during the rainy season when the groundwater is near the surface, increases the risk of pesticide contamination. The results of upscaling from the farm to the catchment scale using soil maps and GIS techniques under various management scenarios and chemical application rates showed that the most effective strategy to reduce chemical leaching is by reducing pesticide application rates and optimizing the application of irrigation water. The identification of potential high risk farms by ranking soils and agricultural practices could be used to formulate management practices that reduce pesticide contamination of the surface and ground water resources in the area.     

Biodegradation of chlorinated organic pesticides endosulfan and chlorpyrifos in soil extract broth using fungi

The present study was designed to screen 20 fungi for their potential to degrade the chlorinated organic pesticides endosulfan and chlorpyrifos. Fungi were first screened for their tolerance to various concentrations of target pesticides using soil extract agar and subsequent degradation studies were performed in soil extract broth containing 25 mg/L of the individual pesticide. Pesticide degradation was evaluated using gas chromatography. Other parameters, such as pH and mycelial weight, were also determined. Based on percent growth inhibition of test fungi and subsequent analysis of EC₅₀ values, the overall results revealed that chlorpyrifos showed significantly more growth inhibition in all tested fungi compared with endosulfan. Trametes hirsuta showed complete degradation of both α‐ and β‐endosulfan isomers and Cladosporium cladosporioides displayed maximum degradation of chlorpyrifos. All test fungi degraded endosulfan more efficiently than chlorpyrifos, except Phanerochaete chrysosporium, Trichoderma harzianum, and Trichoderma virens which showed higher degradation of chlorpyrifos than endosulfan. It was also found that all tested fungi degraded α‐endosulfan more efficiently than β‐endosulfan. Endosulfan sulfate was found to be the major degradation product with all tested fungi. Fungi which showed more endosulfan degradation also produced more endosulfan sulfate. However, less endosulfan sulfate was detected with T. hirsuta and Trametes versicolor, although they degraded endosulfan more efficiently.     

Mineralization and Transfer Processes of <Superscript>14</Superscript>C-labeled Pesticides in Outdoor Lysimeters

A recently designed two-chamber-lysimeter-test-system allows the detailed investigation of degradation, transport and transfer processes of ¹⁴C-labeled substances in soil–plant–atmosphere-systems under outdoor conditions. With this test system it is feasible to distinguish between ¹⁴C-emissions from soil surfaces and ¹⁴C-emissions from plant surfaces in soil monoliths under real environmental conditions. Special soil humidity sensors allow the measurement of soil water content near to the soil surface, in 1 and 5 cm depth. The behavior of organic chemicals can be followed for a whole vegetation period and a mass balance for the applied chemical can be established. Some selected results of the herbicides isoproturon and glyphosate – using the two-chamber-lysimeter-test-system – are presented to demonstrate its applicability for the identification and quantification of the processes that govern pesticide behavior in soil–plant-systems. Mineralization of ¹⁴C-isoproturon was very different in four different soils; the mineralization capacity of the soils ranged from 2 to 60%. Leaching of isoproturon in general was very low, but depending on the soil type and environmental conditions isoproturon and its metabolites could be leached via preferential flow, especially shortly after application. For the herbicide ¹⁴C-glyphosate no accumulation of residues in the soil and no leaching of the residues to deeper soil layers could be observed after three applications. Glyphosate was rapidly degraded to AMPA in the soil. Glyphosate and AMPA were accumulated in soy bean nodules.     

高铁酸盐处理有机废水的研究进展

综述了高铁酸盐去除水中藻类、细菌、烃类衍生物、药品、农药、染料等有机污染物的国内外最新研究进展,并对高铁酸盐的高效利用进行了探讨。高铁酸盐可破坏藻类和细菌细胞的完整性,将大分子芳香烃衍生物氧化为低毒的小分子中间体,将小分子链烃衍生物矿化,破坏药品、农药及染料的不饱和双键。无机矿物在溶液中负载高铁酸盐或将高分子有机物与固体高铁酸盐混合造粒,将是高铁酸盐高效利用领域的研究热点。