Determination of inorganic and organic priority pollutants in biosolids from meat processing industry

The biosolids (BS) generated in the wastewater treatment process of a meat processing plant were monitored and the priority pollutant content was characterized. The trace metal and organic pollutant content – polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs) and polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/PCDF) – were determined quantitatively and compared to guideline limits established by the US EPA and EU. PCBs were not detected in the solid samples, while trace metals, PAHs and PCDD/PCDF were detected in concentrations below the limits established by international standards. Toxic equivalent factors were evaluated for the biosolids, and the results proved that these wastes can be safely deposited on land or used in combustion/incineration plants. Since no previous data were found for meat processing waste, comparisons were made using municipal sewage sludge data reported in the literature. Since, this report monitored part of the priority pollutants established by the US EPA for meat and poultry processing wastewater and sludge, the results verified that low pollution loads are generated by the meat processing plant located in the southern part of Brazil. However, the BS generated in the treatment processes are in accordance with the limits established for waste disposal and even for soil fertilizer.     

Comparative assessment of municipal sewage sludge incineration,gasification and pyrolysis for a sustainable sludge-to-energy management in Greece

For a sustainable municipal sewage sludge management, not only the available technology, but also other parameters, such as policy regulations and socio-economic issues should be taken in account. In this study, the current status of both European and Greek Legislation on waste management, with a special insight in municipal sewage sludge, is presented. A SWOT analysis was further developed for comparison of pyrolysis with incineration and gasification and results are presented. Pyrolysis seems to be the optimal thermochemical treatment option compared to incineration and gasification. Sewage sludge pyrolysis is favorable for energy savings, material recovery and high added materials production, providing a ‘zero waste’ solution. Finally, identification of challenges and barriers for sewage sludge pyrolysis deployment in Greece was investigated.     

The significance of polynuclear aromatic hydrocarbons applied to agricultural soils in sewage sludges in the U.K.

The ubiquity of polynuclear aromatic hydrocarbons (PAHs) in sewage sludges is now well documented. Since PAHs exhibit carcinogenic/mutagenic behaviour concern has been expressed over their fate following sludge application to agricultural soils. This paper presents a resume of the behaviour of sludge applied PAHs in soils and their propensity to transfer from the soil into plant tissues. This information is used to assess the environmental significance of PAHs in sludge amended soils. Sludge PAH inputs to the U.K. environment are compared with other known sources, such as waste disposal and atmospheric deposition and the possible impact of sludge application on human exposure is considered. It is concluded that at present there is no necessity to specifically regulate PAH inputs to agricultural soils in sewage sludge.     

Energy recovery and greenhouse gas reduction potential from food waste in Japan

Waste-to-energy is one effective waste management approach for a sustainable society. The purpose of this study was to clarify the potential for energy recovery and greenhouse gas (GHG) reduction that could be achieved by introducing anaerobic digestion (AD) facilities in the process of reconstructing aging incineration facilities in Japan. Using statistical data from 1068 incineration facilities, four future scenarios were considered and compared with the current situation. As results, compared with the current situation the amount of electricity generated could increase by 60 % in 2030, by combining AD facilities for food waste with new, high-efficiency incineration facilities for remaining municipal solid waste (MSW). From a life cycle perspective, net energy recovery in 2030 was approximately three times greater than in 2011, and GHG emission could be reduced by 27 %. The introduction of AD facilities is attractive for small authorities, which currently treat <100 t/day of MSW through incineration facilities without energy recovery. An AD facility is also beneficial for large authorities. On the contrary, in middle-scale authorities that treat 100–299 t/day of MSW, the reconstruction of incineration facilities to include electricity production capabilities requires careful consideration, because it will significantly influence energy recovery and GHG reduction effects.     

Agronomic characterisation of different types of sewage sludge: Policy implications

Spain is one of the main municipal sewage sludge producers of Europe. This paper aims to agronomically characterise different types of sewage sludge stabilised by different methods (anaerobically digested, composted, and pelletised) and deliver policy recommendations from the results of this characterisation. Anaerobic sewage sludge quality is found to be better in plants with a lower volume of water processing. Composted sludge shows the best quality from a heavy metal point of view, but its low available nitrogen content increases the input of heavy metals when spread, as compared to digested or pelletised sludge. Pelletised sludge has higher heavy metal content than anaerobically digested sludge. Despite the good quality of the sludges, future regulations, especially with regard to Cd levels, will limit the use of this waste in agriculture.     

Reduction of hazardous elements contained in sewage sludge incineration ash

Research and experimental studies were carried out in relation to reduction of hazardous elements contained in sewage sludge incineration ash. A questionnaire survey was conducted in 69 Japanese municipalities with sewage sludge incineration facilities. Selenium content in bag filter ash and ceramic filter ash was relatively higher than that in ash of cyclone and electrostatic precipitators. It was assumed that selenium vaporized in the furnace was due to adsorb in the fly ash on filter when passing through the low-temperature filter. To reduce high boiling point heavy metals in the ash, sewage sludge and incineration ash were heated up using a small muffle furnace. As the result, the chrome and nickel contents were reduced. A decrease in the surface area of ash and the reduction of elements occurred at the same time in sewage sludge and incineration ashes tested in this study.     

Co-combustion of dried sewage sludge and coal in a pulverized coal boiler

More than 1.1 million tons of municipal and industrial sewage sludge is produced annually in Poland. Most of this sewage sludge is landfilled or used for recultivation and fertilization of soil. After accession of Poland to the EU, large investments are planned for wastewater treatment, so it is expected that the amount of sewage sludge produced in Poland will grow in the near future. It is well known that the combustion of sewage sludge is becoming a more and more popular utilization method of such waste. Unfortunately, the current situation in Poland makes it impossible to incinerate the sewage sludge because of a lack of incinerators. One possible solution for Poland is the co-firing of dried sewage sludge in existing coal-fired utility boilers. This article presents results of initial Polish industrial trials of dried municipal sewage sludge and hard coal co-combustion in an OP-230 pulverized coal boiler. Such a solution was shown to be technically viable and not to require changes to the existing technological system. Cocombustion of sewage sludge with coal in power plants seems to be the best solution for sludge utilization in the near future in Poland.     

Environmental assessment of supercritical water oxidation and other sewage sludge handling options.

Sustainable development relies on the eco-efficient use of all flows in society; more value created out of each resource unit. Supercritical water oxidation (SCWO) can be used for treatment of wet organic waste. The technology has been under development for over 20 years but has not yet been fully commercialized. SCWO allows for complete oxidation of all organics in sewage sludge and almost complete recovery of the inherent energy, essentially without harmful emissions. In this paper, a life-cycle assessment (LCA) of sewage sludge SCWO (Aqua-Critox) is presented and the results are compared with LCA results for other sludge handling options: agricultural use, co-incineration with municipal solid waste, incineration with subsequent phosphorus extraction (Bio-Con) and sludge fractionation with phosphorus recovery (Cambi-KREPRO). For SCWO, beneficial utilization of the heat of reaction is of crucial importance for the outcome. The electricity consumed by pumping and the nitrous oxide produced are other important parameters. The best sludge handling option from an environmental point of view depends on what aspect is considered more important in the impact assessment. Regarding global warming, the energy recovery methods perform better than agricultural use.     

Simulation of co-incineration of sewage sludge with municipal solid waste in a grate furnace incinerator

Incineration is one of the most important methods in the resource recovery disposal of sewage sludge. The combustion characteristics of sewage sludge and an increasing number of municipal solid waste (MSW) incineration plants provide the possibility of co-incineration of sludge with MSW. Computational fluid dynamics (CFD) analysis was used to verify the feasibility of co-incineration of sludge with MSW, and predict the effect of co-incineration. In this study, wet sludge and semi-dried sludge were separately blended with MSW as mixed fuels, which were at a co-incineration ratios of 5 wt.% (wet basis, the same below), 10 wt.%, 15 wt.%, 20 wt.% and 25 wt.%. The result indicates that co-incineration of 10 wt.% wet sludge with MSW can ensure the furnace temperature, the residence time and other vital items in allowable level, while 20 wt.% of semi-dried sludge can reach the same standards. With lower moisture content and higher low heating value (LHV), semi-dried sludge can be more appropriate in co-incineration with MSW in a grate furnace incinerator.     

The production, use and quality of sewage sludge in Denmark

In Denmark, the production of municipal sewage sludge decreased from approximately 170,000 ton d.m. in 1994 to 140,000 ton d.m. in 2002. The sludge is handled and treated in a number of ways. The quality of Danish sludge has steadily improved since the middle of the 1980s, when the first set of quality criteria for heavy metals was introduced. In 1997, cut-off criteria for the organic pollutants, LAS, DEHP, nonylphenol and PAHs were introduced. Effective control from authorities, voluntary phasing out agreements with industry, improved source identification tools, better handling and after-care methods have in combination with higher waste duties led to a significant reduction in the sludge level of especially cadmium, mercury, chromium, LAS and nonylphenol. The increased quality demand has, nevertheless, also led to a minor reduction in the use of sewage sludge as organic fertiliser on agricultural land.     

Energy implications of the thermal recovery of biodegradable municipal waste materials in the United Kingdom

Waste management policies and legislation in many developed countries call for a reduction in the quantity of biodegradable waste landfilled. Anaerobic digestion, combustion and gasification are options for managing biodegradable waste while generating renewable energy. However, very little research has been carried to establish the overall energy balance of the collection, preparation and energy recovery processes for different types of wastes. Without this information, it is impossible to determine the optimum method for managing a particular waste to recover renewable energy. In this study, energy balances were carried out for the thermal processing of food waste, garden waste, wood, waste paper and the non-recyclable fraction of municipal waste. For all of these wastes, combustion in dedicated facilities or incineration with the municipal waste stream was the most energy-advantageous option. However, we identified a lack of reliable information on the energy consumed in collecting individual wastes and preparing the wastes for thermal processing. There was also little reliable information on the performance and efficiency of anaerobic digestion and gasification facilities for waste.     

Evaluation of an organic soil amendment generated from municipal solid waste seeded with activated sewage sludge

This study investigated the feasibility of using fresh activated sewage sludge as inoculum for the microbial valorization of segregated municipal solid waste and evaluated the quality of organic soil amendment generated. Organic fraction of municipal solid waste, which consisted of vegetative (vegetable, fruit and flower) wastes was seeded with activated sewage sludge and processed by rapid aerobic microbial treatment. Efficacy of microbial valorization process and quality of final product were assessed by physico-chemical analysis. Suitability of final product was assessed with regard to heavy metal content, pesticide residues, microbiological quality and phytotoxicity. Quality of the soil amendment generated was compared with the control product generated with a commercial microbial inoculum. Phytotoxicity experiments indicated the stimulatory effect of sewage sludge seeded soil amendment on plant growth but inhibition was observed in closed growth test due to the evolution of gaseous phytotoxic agents. The study suggests that segregated municipal solid waste can be effectively valorized with activated non-dewatered sewage sludge as inoculum and the quality of soil amendment generated was comparable to compost intended for unrestricted applications.     

Effect of crystal size on zinc stabilization in aluminum-rich ceramic matrix

With aluminum as the predominant element, incineration residues from municipal solid waste and sewage sludge may be reused as precursors for zinc stabilization. As solid-state reactions are influenced by the crystal sizes of the reactants, the aluminum-containing components with different crystal sizes in the incineration residues may affect zinc transformation and immobilization. In this study, Al₂O₃ was prepared with a variety of crystal sizes to simulate the aluminum-rich incineration residue matrix, and ZnO was mixed with Al₂O₃ to study the zinc incorporation mechanisms. The crystal sizes of Al₂O₃ were determined using Rietveld refinement. Quantification results showed that ~?30% of zinc was incorporated into the ZnAl₂O₄ spinel when Al₂O₃ with the largest crystal size was used. However, the zinc transformation was enhanced twofold when the Al₂O₃ precursor had the smallest crystal size. This study confirmed the potential enhancement of zinc immobilization by nanoscale crystals in simulated aluminum-rich incineration residues. By improving zinc stabilization efficiencies using poorly crystallized aluminum-containing compounds instead of increasing the energy consumption by increasing the sintering temperatures, we can achieve an economic and environmental win–win scenario for the beneficial utilization of incineration residues of municipal solid waste and sewage sludge.     

Co-digestion of grease trap sludge and sewage sludge

Redirection of organic waste, from landfilling or incineration, to biological treatment such as anaerobic digestion is of current interest in the Malmö-Copenhagen region. One type of waste that is expected to be suitable for anaerobic digestion is sludge from grease traps. Separate anaerobic digestion of this waste type and co-digestion with sewage sludge were evaluated. The methane potential was measured in batch laboratory tests, and the methane yield was determined in continuous pilot-scale digestion. Co-digestion of sludge from grease traps and sewage sludge was successfully performed both in laboratory batch and continuous pilot-scale digestion tests. The addition of grease trap sludge to sewage sludge digesters was seen to increase the methane yield of 9–27% when 10–30% of sludge from grease traps (on VS-basis) was added. It was also seen that the grease trap sludge increases the methane yield without increasing the sludge production. Single-substrate digestion of grease trap sludge gave high methane potentials in batch tests, but could not reach stable methane production in continuous digestion.     

Quantitative mineralogical composition of complex mineral wastes – Contribution of the Rietveld method

The objective of the work presented in this paper is the quantitative determination of the mineral composition of two complex mineral wastes: a sewage sludge ash (SSA) and a municipal solid waste incineration fly ash (MSWIFA). The mineral compositions were determined by two different methods: the first based on calculation using the qualitative mineralogical composition of the waste combined with physicochemical analyses; the second the Rietveld method, which uses only X-ray diffraction patterns. The results obtained are coherent, showing that it is possible to quantify the mineral compositions of complex mineral waste with such methods.The apparent simplicity of the Rietveld method (due principally to the availability of software packages implementing the method) facilitates its use. However, care should be taken since the crystal structure analysis based on powder diffraction data needs experience and a thorough understanding of crystallography. So the use of another, complementary, method such as the first one used in this study, may sometimes be needed to confirm the results.     

Optimization of bio-drying of kitchen waste: inoculation,initial moisture content and bulking agents

Journal of Material Cycles and Waste Management - Bio-drying has been proved to be a promising method for treatment of MSW (municipal solid waste) and sewage sludge due to its high energy...     

Leaching behavior of heavy metals and PAHs from MSWI bottom ash in a long-term static immersing experiment

Bottom ash is the main solid residue (in weight) which is produced by municipal solid waste incineration (MSWI) facilities. This material is composed of a mineral matrix and may be used as secondary raw material for construction purpose. However, for this specific application the leaching behavior of the environmentally relevant elements under field conditions is different from the predicted behavior based on results obtained from the standardized leaching test. Therefore, a 70-day simulative experiment has been carried out in this study to investigate the release of major heavy metals (Cu and Pb) and polycyclic aromatic hydrocarbons (PAHs) from several particle fractions of bottom ash under a static leaching condition, where bottom ash was immersed in water at different initial pH values. Results showed that: (1) the leaching behavior of Cu and Pb was much similar with that depicted by the standardized leaching tests, and fit well with the solubility-controlling mechanism; (2) the sorption mechanism on the neoformed phases may control the solubility of Pb, whereas the dissolved organic carbon (DOC) may play an important role in the solubility of Cu; and (3) the leached PAHs were degraded during the later period of leaching process.     

Moisture retention of municipal solid waste mixed with sewage sludge and ash in a semi-arid climate.

Mechanisms involved in moisture storage in refuse are explored using data from four sets of experiments in a semi-arid climate. Two laboratory series of experiments contained municipal solid waste (MSW) amended with sewage sludge, one with higher proportions of ash in the MSW than the other. Outdoor experiments contained waste streams with different proportions of ash. Field cells compared moisture retention of refuse and MSW co-disposed with sewage sludge. Sewage sludge at high loads was found to increase the moisture storage relative to unamended MSW. Belt-pressed sludge retained water as bound water that was released by decay and changing pH. Sun-dried sludge also retained more moisture than MSW alone. In gravimetric terms, ash reduced the storage potential of MSW, in laboratory and outdoor experiments. However, outdoor experiments released less leachate from ash-rich refuse than middle-income waste with no ash fraction.     

Nitrous oxide (N2O) emissions from waste and biomass to energy plants.

Following the Kyoto protocol with respect to reducing emissions of greenhouse gases emissions, and EU energy policy and sustainability in waste management, there has been an increased interest in the reduction of emissions from waste disposal operations. From the point of view of nitrous oxide (N2O) emissions, waste incineration and waste co-combustion are very acceptable methods for waste disposal. In order to achieve very low N2O emissions from waste incineration, particularly for waste with higher nitrogen content (e.g. sewage sludge), two factors are important: temperature of incineration over 900 degrees C and avoiding the selective non-catalytic reduction (SNCR) de-NO(X) method based on urea or ammonia treatments. The more modern selective catalytic reduction (SCR) systems for de-NO(X) give rise to negligible sources of N2O.     

生活垃圾焚烧发电厂二恶英对人体健康的风险评价

介绍了生活垃圾焚烧过程中二恶英的产生机理、对人体的危害及控制措施，以某生活垃圾焚烧发电厂环境影响评价为例，提出了二恶英对人体健康风险评价方法，同类项目环境影响评价提供借鉴。