Synthesis and identification of graft copolymers of wood pulp and styrene

Based on the graft copolymerization reactions of lignin and vinyl monomers, a series of graft copolymers of wood pulp and styrene (1-phenylethene) has been synthesized. The wood pulps used in this research are unbleached products produced by chemical, thermal, and mechanical pulping. All of them contain a high content of lignin (25–29 wt%). The grafting reaction is a free radical polymerization coinitiated by calcium chloride, hydrogen peroxide, and wood pulp in dimethylsulfoxide at 30°C. The effect of reaction temperature, reaction time, and the amount of the reactants on the conversion of monomer, yield of product, weight increase of pulp, and grafting efficiency of monomer has been studied. The grafted wood pulp was separated from homopolystyrene formed during the reaction by extraction of the reaction product with benzene in a Soxhlet apparatus for at least 48 h. The results show that after the reaction, the weight of all wood pulps was significantly increased and the weight increase of very high yield sodium bisulfite pulp (VHYS) was 333%. This proves that a part of the polymerized styrene was chemically bound to the wood pulp. The Fourier transform infrared (FTIR) spectra of the extracted products show absorbance peaks characteristic of both wood and polystyrene and, thus, provide strong proof of grafting. Grafting has completely changed the surface properties of the starting wood pulp from hydrophilic to hydrophobic, and under ordinary thermal compression conditions, thermoplastic composite objects of good uniformity can be made directly from reaction products which contain up to 52 wt% wood pulp.     

资源循环科学与工程专业课程体系优化与教学内容创新实践的探索

针对资源循环科学与工程本科专业课程教学,以西安建筑科技大学该专业课程体系为案例,通过对毕业生和专业研讨会调研,分析了课程体系建设的现状和存在的问题。借鉴其他高校资源专业的课程体系和教学内容,通过梳理各门专业课程的教学内容和相互联系,构建了资源专业课程体系课程群,探索了课程体系优化的方法和增加创新实践环节的具体措施。     

浅议碳排放与废钢铁的节能减排功效

二氧化碳是导致全球气候变暖、人类生存环境恶化的主要原因。简要介绍世界钢铁工业二氧化碳排放情况,针对我国钢铁工业碳排放的具体情况,提出发展我国废钢产业,提高废钢铁的供应能力,是我国钢铁工业摆脱危机,实现低碳发展、绿色发展的主要途径。     

Photo-oxidation and Photo-toxicity of Crude and Refined Oils

The fate and effects of an oil spill are effected by solar radiation through the action of photo-oxidation and photo-toxicity. Photo-oxidation, an important process in the weathering of oil, produces a variety of oxidized compounds, including aliphatic and aromatic ketones, aldehydes, carboxylic acids, fatty acids, esters, epoxides, sulfoxides, sulfones, phenols, anhydrides, quinones and aliphatic and aromatic alcohols. Some of these compounds contribute to the marine biota toxicity observed after an oil spill. Photo-toxicity occurs when uptake of certain petroleum compounds, e.g. certain polycyclic aromatic hydrocarbons and benzothiophenes, is followed by solar exposure which results in much greater toxicity than after dark uptake. The mechanism of PAH photo-toxicity includes absorbance of solar radiation by the PAH which produces a free radical and this free radical in turn reacts with oxygen to produce reactive oxygen species that can damage DNA and other cellular macromolecules. While most studies on photo-toxicity have been carried out in the laboratory, there are studies showing that water from an oil spill is photo-toxic to bivalve embryos for at least a few days after the spill. Other studies have found that oil contaminated sediments are photo-toxic to several marine invertebrates. More studies are required to determine if marine fauna at an oil spill site are effected by the action of photo-toxicity and photo-oxidation.     

Fate and effect of linuron and metribuzin on the co-composting of green waste and sewage sludge

The fate and effect of the herbicides linuron and metribuzin on the co-composting of sewage sludge and green waste were addressed in this work. The experiments were conducted in metal cubic containers of 1.0 m³ volume simulating a windrow composting system. A mixture of sludge and green waste was prepared at a ratio of 1:5 v/v. The mixture was split in four equal parts and the two herbicides were added, using a pressure sprayer, as sole or mixed pollutant in each of the three mixtures. The forth mixture was composted without any addition of herbicide, to serve as control. Temperature, physicochemical characteristics, herbicide concentration, carbon dioxide emission, methane emission and microbiological parameters were measured either daily or every time the mixtures were turned, for a period of 80 days. Both herbicides’ concentration decreased significantly resulting in removal efficiencies of 99.1–99.7% and 95.8–96.0% for linuron and metribuzin, respectively. Incubation of microbiologically inactive mixtures at a temperature schedule following the spontaneous temperature evolution in the composters resulted in very little (1–11%) decomposition for both herbicides. Comparison of the variation of physicochemical parameters and microbial populations during composting indicated that both herbicides did not affect the composting process.     

我国废旧电子电器产品拆解技术、设备应用现状及改进建议

从我国废旧电子电器回收行业基本情况、专业技术人才情况、相关企业拆解技术设备情况等方面，阐述了我国废旧电子电器产品拆解技术、设备应用现状，并提出相关改进提升建议。     

炼油废水处理的现状、问题及对策

针对原油性质日趋恶劣、排放标准日益严格的形势,介绍了炼油废水的处理现状,分析了炼油废水在达标排放、处理回用、运行成本等方面面临的主要问题,提出了从源头挖掘节水减排潜力、实施装置排水分级控制与高浓度废水预处理、对废水处理场进行适度改造和补充完善、开发含盐废水处理技术等对策。     

Preparation and Characterization of Xylan Derivatives and Their Blends

Although hemicellulose is found widely in nature, it is currently under-utilized as a raw material for commercial applications. It would be desirable to find new uses for hemicellulose in order to add value to this agro-based material. A common type of hemicellulose is xylan, which is found in a number of wood species and in cotton. In this work we prepared cationic and anionic xylan derivatives and characterized them by ¹³C NMR, FT-IR, size exclusion chromatography (SEC), thermal analysis, and rheology. In particular, the ¹³C NMR spectra of carboxymethyl xylan (CMX) and quaternary ammonium-adducted xylan (QAX) were fully assigned with the help of samples with different degrees of substitution. SEC indicated that the beechwood xylan showed a bimodal molecular weight distribution, but with derivatization the distribution tended to become unimodal. Thermal analysis and rheology studies did not uncover any surprises; the solution of xylan and its derivatives exhibited mostly Newtonian behavior. The blends of CMX and QAX produced a precipitate at almost all ratios, indicating the formation of a polyelectrolyte complex. When cationic and anionic xylan samples were added together to paper, the paper dry strength increased. Thus, the combination of cationic/anionic xylan may be of interest in selected applications.     

Recovery of zinc and lead from fly ash from ash-melting and gasification-melting processes of MSW--comparison and applicability of chemical leaching methods

Fly ash generated from MSW ash-melting and gasification-melting plants, known as Melting Furnace Fly Ash (MFA), contains considerable amounts of heavy metals such as Pb and Zn. These metals can be recovered using a smelting furnace after "pre-treatment" for removal of unnecessary elements such as Cl, Sn and Si. Chemical methods have been studied for pretreatment in the past. However, they have been discussed only with regard to treatment cost and the concentration of Pb and Zn recovered, but neither applicability to various types of MFA nor the environmental impact have been considered. In this study, acid, alkaline and ammonia/chloride leaching methods were compared from the standpoints of: (1) applicability to MFA, (2) concentration of Pb and Zn recovered, (3) treatment cost, and (4) environmental impact. Twenty-three samples of MFAs were collected and classified into 4 types based on element contents. A Pb and Zn recovery experiment was conducted for the representative MFA of those types. The results showed: (1) MFA from gasification-melting plants cannot be treated by chemical methods; (2) the other MFA can be treated to an acceptable quality by existing smelting furnaces; (3) only MFA from electric resistance ash-melting plants can be treated easily by the water washing method; and (4) alkaline and ammonia/chloride leaching methods were more effective than acid leaching.     

Review of environmental aspects and waste management of stone cutting and fabrication industries

Iran is the second largest stockholder of construction stones with 10 % of world production ;and there are more than 4000 stone cutting and fabrication industries (SCFIs). In the processing of raw stones, a considerable part of stone is turned into waste. Generated wastes include excess parts of different stones and sludge. The present paper reviews the state of SCFIs waste management using multiple data sources including site, analysis of effluent and sludge samples, and conducting interviews with people who are involved in 286 SCFIs in Qom and Tabriz. The results revealed that currently almost 35 to 52.5 % of raw stones were converted to solid wastes depending on stone cutting and processing methods, type of stones and their quality, which seemed a high percentage. Also, the effluents between 0.8 and 2.8 m³ were generated per ton of processed stone. Based on the analysis of heavy metals with atomic absorption spectroscopy, sludge samples contained a considerable amount of Pb, Cu, Cr, and Cd. It was also found that the lack of specific recycling, reuse and disposal programs and suitable supervision has led to uncontrolled disposal of stone wastes and sludge in different areas. However, there are good opportunities for reuse and recycling of the SCFIs wastes.     

Preparation and Characterization of Clay Nanocomposites of Plasticized Starch and Polypropylene Polymer Blends

Plasticized starch (PLS) is a renewable, degradable, and inexpensive polymer, but it suffers from poor mechanical properties. The mechanical properties can be improved by blending PLS with polyolefins, nonetheless, at high PLS content, the mechanical properties remain poor. Here we show that addition of clay can greatly improve the mechanical properties of PLS/polypropylene blends at high starch content. Unmodified and organically modified montmorillonite clays, MMT and Cloisite 30B respectively, were added to blends of glycerol-plasticized starch and polypropylene, compatibilized using maleated polypropylene. TEM indicates that MMT is well dispersed in the PLS phase of the blends, while Cloisite 30B is located both within the PLS phase as well as at the interface between PLS and PP. At high PLS content, the addition of clay increased the tensile strength and tensile modulus by an order of magnitude, while reducing the ultimate elongation only slightly. Such improvements are attributable to both the addition of clay as a reinforcing component, as well as to the change in the two phase morphology due to addition of clay.     

Evaluation of toxic and genotoxic potential of stabilized industrial waste and contaminated soils

Artificial aqueous samples (eluates, percolates, immersion waters) were obtained from contaminated soils and stabilized industrial wastes. The toxicity and genotoxicity of these aqueous fractions have been evaluated in vivo in the aquatic larvae of the amphibian Xenopus laevis. Four biotests have been applied: a test of subchronic toxicity and three biomakers: (1) measurement of the activity of ethoxyresorufine-o-dealkylase in the liver, (2) detection of DNA adducts in the liver and the blood, and (3) measurement of the rate of micronuclei in the erythrocytes. Biological datas were completed through a chemical analysis. The main conclusions of this study are: The importance of integrating different toxicity criterias into a biological battery (phenotypic and genotypic criterias). Some aqueous extracts did not seem to be very toxic, whereas their genotoxic effects were rather significant [e.g. the stabilized Municipal Solid Waste (MSW) ashes]. The importance of coupling together chemical and biological approaches to refine the impact. Actually, some eluates (lixiviation or percolation) coming from polluted soils appeared to be very poorly loaded with pollutants, whereas the toxic and genotoxic impact of these complex matrices were rather noticeable. In addition, when applying the leaching standardized procedure, the hazardous potential of the two analysed soils may be underestimated if the results on percolates and on eluates have been compared. This study highligths the importance of coupling the tools of characterization and preparation of samples to be analysed according to the objectives to be reached.     

TEMPO-Mediated Oxidation of Norway Spruce and Eucalyptus Pulps: Preparation and Characterization of Nanofibers and Nanofiber Dispersions

This study deals with 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO)-mediated oxidation of cellulose. Softwood and hardwood pulp fibers were suspended in water and oxidized to various extents at pH 10 and 22 °C using sodium hypochlorite in the presence of TEMPO radical and sodium bromide. This reaction system is known to be the most efficient one for the introduction of both surface carboxyl and aldehyde groups. Important relationships between formation of these functional groups and the fibrillation yield, light transmittance of the water dispersions and degree of polymerization of the oxidized softwood and hardwood pulps were established in the present study. A birefringence test confirmed the presence of nanofibers which according to atomic force microscopy analyses had diameters in the 1.6–3.8 nm range.     

Laboratory Experiments and Estimation of Cumulative Infiltration and Sorptivity

Soil water cumulative infiltration affects the environment by controlling the irrigation rate and consequently the water and pollutants movement through the ground. In order to study the cumulative infiltration in a sandy soil sample, experiments were performed in the laboratory. The sample was placed uniformly in a transparent column with an inner diameter of 6 cm. A constant head boundary condition of a 2 mm height was applied on the surface of the sample and the cumulative volume of the incoming water was measured. Soil moisture at four locations of the column was measured, by using the TDR method in order to obtain the moisture profiles. By comparing the values of the infiltrated water volumes with those calculated by the integration of the moisture profiles, a good agreement was found out. Also the Parlange theoretical model fitted very well with the infiltration experimental points.     

废锂电池放电及正极片分离回收处理

研究了废锂电池放电及正极片分离回收处理工艺。实验结果表明:经质量浓度30 g/L NaCl溶液浸泡9.0 h可实现电池放电,残余电压在0.5 V以下;在60℃恒温水浴振荡、NaOH质量浓度40 g/L、废锂电池质量与NaOH溶液体积的比为15 g/L的优化条件下,集流体完全与活性物质分离,回收得到的黑色粉末为LiCoO2活性材料,未见铝杂质的特征峰;通过硫酸中和的方法回收碱浸溶液中的铝,当体系pH为10.0时,可获得最大量的Al(OH)3沉淀,沉淀物颗粒表面光滑,粒径大小不一。     

Synthesis and Characterization of Polyols and Polyurethane Foams from PET Waste and Crude Glycerol

In this study, polyethylene terephthalate (PET) waste from post-consumer soft-drink bottles and crude glycerol from the biodiesel industry were used for the preparation of polyols and polyurethane foams. PET waste was firstly depolymerized by the glycolysis of diethylene glycol. The glycolyzed PET oligomers were then reacted with crude glycerol at different weight ratios to produce polyols via a series of reactions, such as esterification, transesterification, condensation, and polycondensation. The polyols were characterized by titration, viscometry, gel permeation chromatography (GPC), and differential scanning calorimetry. Subsequently, polyurethane (PU) foams were made via the reaction between the produced polyols and polymeric methylene-4,4′-diphenyl diisocyanate and were characterized by mechanical testing, scanning electron microscopy, and thermogravimetric analysis. Polyols from crude glycerol and their PU foams were also prepared to compare properties with those of polyols and PU foams from PET and crude glycerol. The influence of aromatic segments existing in glycolyzed PET and glycerol content on the properties of the polyols and PU foams was investigated. It was found that aromatic segments of polyols from glycolyzed PET helped increase their molecular weights and improve thermal stability of PU foams, while high glycerol content in polyols increased the hydroxyl number of polyols and the density and compressive strength of PU foams.     

Technical and environmental long-term properties of industrial residues--summary of field and laboratory investigations

In Sweden, use of industrial residues is still hindered by concern for their long-term properties. A three-year research project was therefore initiated aiming to (1) identify the crucial processes of ageing related to the usefulness of residues in roads; (2) investigate the consequences of these processes for technical and environmental properties of the residues, and (3) propose a method for accelerated ageing to predict the long-term properties. This paper gives an overview of the project methodology, a summary of the test results and references to papers where further details are given.The project, running through 2006-2008, compared naturally aged samples of two residues used as sub-bases in existing asphalt paved roads with samples of fresh residues from producers’ piles. Steel slag of electric arc furnace (EAF) type and municipal solid waste incinerator (MSWI) bottom ash were chosen. The samples were thoroughly characterised in order to identify which ageing processes had been crucial.The results showed that:

-

Bottom ash from the pavement edge was more aged than bottom ash from the road centre. However, no difference in pH was found, instead the differences were caused by differences in water exposure.

-

Steel slag from the pavement edge showed traces of carbonation and leaching processes, whereas slag from the road centre was identical to fresh slag.

-

Water exposure to the subbase materials after ten years in an asphalt paved road was calculated to less than 0.1-0.5 litres per kg.

-

Ageing reactions in steel slag and MSWI bottom ash, ready for use, were too small to be verified by laboratory measurement of deformation properties under loaded conditions.

An accelerated ageing test for steel slag was set up to achieve the carbonation (decrease in pH) and leaching that was observed in the pavement edge material.An accelerated ageing test for bottom ash was set up to achieve the pozzolan reactions that were observed in SEM analyses of in situ specimens.It is recommended to use uncrushed particles when properties of aged material are studied, in order to preserve the original particle surfaces.     

Co-gasification of wood and polyethylene with the aim of CO and H2 production

This article describes the gasification of polyethylene–wood mixtures to form syngas (H₂ and CO) with the aim of feedstock recycling via direct fermentation of syngas to ethanol. The aim was to determine the effects of four process parameters on process properties that give insight into the efficiency of gasification in general, and particularly into the optimum gasification conditions for the production of ethanol by fermentation of producer gas. Gasification experiments (fluidized bed, 800°–950°C) were done under different conditions to optimize the composition of syngas suitable for fermentation purposes. The data obtained were used for statistical analysis and modeling. In this way, the effect of each parameter on the process properties was determined and the model was used to predict the optimum gasification conditions. The parameters varied during the experiment were gasification temperature, equivalence ratio, the ratio of plastic to wood in the feed, and the amount of steam added to the process. The response models obtained proved to be statistically significant in the experimental domain. The optimum gasification conditions for maximization of carbon monoxide and hydrogen production were identified. The conditions are: temperature 900°C, equivalence ratio 0.15, amount of plastic in the feed 0.11 g/g feed, and amount of steam added 0.42 g/g feed. These optimum conditions are at the edge of the present experimental domain. The maximum combined CO and H₂ efficiency was 42%, and for the maximum yield of CO and H₂ it is necessary to minimize the polyethylene content, minimize the added steam and the equivalence ratio, and maximize temperature.     

Emissions of ammonia and greenhouse gases during combined pre-composting and vermicomposting of duck manure

Combined pre-composting and vermicomposting has shown potential for reclamation of solid wastes, which is a significant source of ammonia (NH₃), and greenhouse gases (GHG), including nitrous oxide (N₂O), methane (CH₄), and carbon dioxide (CO₂). Earthworms and amendments may both affect physico-chemical characteristics that control gas-producing processes, and thus affect NH₃ and GHG emissions. Here, we used two-way ANOVA to test the effects of addition of reed straw and combined addition of reed straw and zeolite on NH₃ and GHG emissions during pre-composting of duck manure, either with or without a follow-up phase of vermicomposting. Results showed that cumulative N₂O, CH₄, and CO₂ emissions during pre-composting and vermicomposting ranged from 92.8, 5.8, and 260.6 mg kg^?1 DM to 274.2, 30.4, and 314.0 mg kg^?1 DM, respectively. Earthworms and amendments significantly decreased N₂O and CH₄ emissions. Emission of CO₂ was not affected by earthworms, but increased in responses to addition of reed straw. Cumulative NH₃ emission ranged from 3.0 to 8.1 g kg^?1 DM, and was significantly decreased by reed straw and zeolite addition. In conclusion, combined pre-composting and vermicomposting with reed straw and zeolite addition would be strongly recommended in mitigating emissions of N₂O, CH₄, and NH₃ from duck manure. Moreover, this method also provides nutrient-rich products that can be used as a fertilizer.     

Oil Spills and the Social Amplification and Attenuation of Risk

The news media and environmental groups are frequently blamed for public overreaction to unfortunate events like major oil spills; an example of the social amplification of risk. A disconnect between public views regarding spill consequences and necessary remedies on the one hand, and expert opinion on these same questions on the other, is a frequently identified consequence of this social amplification. A more comprehensive examination of the ways in which scientific messages can fail to inform the public or to rationalize public policy suggests however that a more complex phenomenology is at work. Perceived risks can be attenuated as well as amplified, and many organizations besides the news media contribute to the shaping of public risk attitudes. As a result, social and political questions of blame can prove difficult to disentangle from scientific questions of impact. Both social amplification and social attenuation of messages about the risks of oil production and transport are evident in public responses to the Exxon Valdez spill, and both continue to affect the debate about oil production and its transport by sea today. Oil-spill science has had mixed success in modulating these risk concerns, as the conduct of oil-spill science has itself felt the effects of risk amplification and attenuation. Because these difficulties are bound up in questions of social trust, institution building is seen as the best long-term strategy for redress. The Prince William Sound Regional Citizen’s Advisory Council offers a hopeful example that such institution building can occur, given sufficient motivation, resources and the means and time for diverse interests to develop a shared vision of the risks to be addressed.