Efficacy of vegetated buffer strips for retaining Cryptosporidium parvum

Overland and shallow subsurface hydrologic transport of pathogenic Cryptosporidium parvum oocysts from cattle feces into surface drinking water supplies is a major concern on annual grasslands in California's central and southern Sierra Nevada foothills. Soil boxes (0.5 m wide x 1.1 m long x 0.3 m deep) were used to evaluate the ability of grass vegetated buffer strips to retain 2 x 10(8) spiked C. parvum oocysts in 200-g fecal deposits during simulated rainfall intensities of 30 to 47.5 mm/h over 2 h. Buffers were comprised of Ahwahnee sandy loam (coarse-loamy, mixed, active, thermic Mollic Haploxeralfs; 78:18:4 sand to silt to clay ratio; dry bulk density = 1.4 g/cm(3)) set at 5 to 20% land slope, and >/=95% grass cover (grass stubble height = 10 cm; biomass = 900 kg/ha dry weight). Total number of oocysts discharged from each soil box (combined overland and subsurface flow) during the 120-min simulation ranged from 1.5 x 10(6) to 23.9 x 10(6) oocysts. Observed overall mean log(10) reduction of total C. parvum flux per meter of vegetated buffer was 1.44, 1.19, and 1.18 for buffers at 5, 12, and 20% land slope, respectively. Rainfall application rate (mm/h) was strongly associated with oocyst flux from these vegetated buffers, resulting in a decrease of 2 to 4% in the log(10) reduction per meter buffer for every additional mm/h applied to the soil box. These results support the use of strategically placed vegetated buffers as one of several management strategies that can reduce the risk of waterborne C. parvum attributable to extensive cattle grazing on annual grassland watersheds.     

Interrelationship of macropores and subsurface drainage for conservative tracer and pesticide transport

Macropore flow results in the rapid movement of pesticides to subsurface drains, which may be caused in part by a small portion of macropores directly connected to drains. However, current models fail to account for this direct connection. This research investigated the interrelationship between macropore flow and subsurface drainage on conservative solute and pesticide transport using the Root Zone Water Quality Model (RZWQM). Potassium bromide tracer and isoxaflutole, the active ingredient in BALANCE herbicide [(5-cyclopropyl-4-isoxazolyl) [2(methylsulfonyl)-4-(trifluoromethyl)phenyl] methanone], with average half-life of 1.7 d were applied to a 30.4-ha Indiana corn (Zea mays L.) field. Water flow and chemical concentrations emanating from the drains were measured from two samplers. Model predictions of drain flow after minimal calibration reasonably matched observations (slope = 1.03, intercept = 0.01, and R(2) = 0.75). Without direct hydraulic connection of macropores to drains, RZWQM under predicted bromide and isoxaflutole concentration during the first measured peak after application (e.g., observed isoxaflutole concentration was between 1.2 and 1.4 mug L(-1), RZWQM concentration was 0.1 mug L(-1)). This research modified RZWQM to include an express fraction relating the percentage of macropores in direct hydraulic connection to drains. The modified model captured the first measured peak in bromide and isoxaflutole concentrations using an express fraction of 2% (e.g., simulated isoxaflutole concentration increased to 1.7 mug L(-1)). The RZWQM modified to include a macropore express fraction more accurately simulates chemical movement through macropores to subsurface drains. An express fraction is required to match peak concentrations in subsurface drains shortly after chemical applications.     

The effect of flow path and mixing layer on phosphorus release: physical mechanisms and temperature effects

Soil phosphorus (P) concentrations typically are greater in surface soils compared with subsurface soils. Surface soils have a greater chance to interact with runoff leading to P transport to streams. The thin surface layer where P concentrates is referred to as the mixing layer denoting where water and chemicals mix during transport. The objective of this study was to evaluate the effect of hydrologic flow paths on soluble reactive phosphorus (SRP) loss at two temperatures. Laboratory flumes were built to simulate infiltration, return flow, saturation excess, and interflow, and subsequent interaction with the mixing layer. The sandy loam soil in the flumes was kept at saturation throughout all experiments, so that biochemical effects were normalized. Flow through the flumes was maintained at 3.6 mm/h for 24 to 99 h (at 6 and 25 degrees C) with water entering and exiting the flumes at different ports (to simulate different flow paths) or as low intensity rainfall. Experiments were performed with and without an artificially created P-enriched surface layer (5 mm thick, total P increased from 1010 mg/kg in the original soil to 2310 mg/kg by addition of dissolved phosphate). Results indicated that (i) SRP release was greater in soil with a mixing layer than in soil without a mixing layer; (ii) SRP release was greater during experiments at 25 degrees C than at 6 degrees C; (iii) at 25 degrees C, SRP release was greatest when water traversed the mixing layer in the upward direction (i.e., in return flow), and by flow parallel to the mixing layer (i.e., surface runoff); and (iv) at 6 degrees C, SRP release in subsurface flow following rainfall was slightly greater than in return flow and infiltration. Our results confirmed the presence of a variable, temperature-dependent desorption process when runoff water interacted with the mixing layer. Our findings have important implications for how different water flow paths in and over the soil interact with P in the soil, and what the ultimate concentration will be in runoff and interflow.     

Modeling Parent and Metabolite Fate and Transport in Subsurface Drained Fields With Directly Connected Macropores1

Abstract: Few studies exist that evaluate or apply pesticide transport models based on measured parent and metabolite concentrations in fields with subsurface drainage. Furthermore, recent research suggests pesticide transport through exceedingly efficient direct connections, which occur when macropores are hydrologically connected to subsurface drains, but this connectivity has been simulated at only one field site in Allen County, Indiana. This research evaluates the Root Zone Water Quality Model (RZWQM) in simulating the transport of a parent compound and its metabolite at two subsurface drained field sites. Previous research used one of the field sites to test the original modification of the RZWQM to simulate directly connected macropores for bromide and the parent compound, but not for the metabolite. This research will evaluate RZWQM for parent/metabolite transformation and transport at this first field site, along with evaluating the model at an additional field site to evaluate whether the parameters for direct connectivity are transferable and whether model performance is consistent for the two field sites with unique soil, hydrologic, and environmental conditions. Isoxaflutole, the active ingredient in BALANCE^® herbicide, was applied to both fields. Isoxaflutole rapidly degrades into a metabolite (RPA 202248). This research used calibrated RZWQM models for each field based on observed subsurface drain flow and/or edge of field conservative tracer concentrations in subsurface flow. The calibrated models for both field sites required a portion (approximately 2% but this fraction may require calibration) of the available water and chemical in macropore flow to be routed directly into the subsurface drains to simulate peak concentrations in edge of field subsurface drain flow shortly after chemical applications. Confirming the results from the first field site, the existing modification for directly connected macropores continually failed to predict pesticide concentrations on the recession limbs of drainage hydrographs, suggesting that the current strategy only partially accounts for direct connectivity. Thirty‐year distributions of annual mass (drainage) loss of parent and metabolite in terms of percent of isoxaflutole applied suggested annual simulated percent losses of parent and metabolite (3.04 and 1.31%) no greater in drainage than losses in runoff on nondrained fields as reported in the literature.     

Soil property control of biogeochemical processes beneath two subtropical stormwater infiltration basins

Substantially different biogeochemical processes affecting nitrogen fate and transport were observed beneath two stormwater infiltration basins in north-central Florida. Differences are related to soil textural properties that deeply link hydroclimatic conditions with soil moisture variations in a humid, subtropical climate. During 2008, shallow groundwater beneath the basin with predominantly clayey soils (median, 41% silt+clay) exhibited decreases in dissolved oxygen from 3.8 to 0.1 mg L and decreases in nitrate nitrogen (NO-N) from 2.7 mg L to <0.016 mg L, followed by manganese and iron reduction, sulfate reduction, and methanogenesis. In contrast, beneath the basin with predominantly sandy soils (median, 2% silt+clay), aerobic conditions persisted from 2007 through 2009 (dissolved oxygen, 5.0-7.8 mg L), resulting in NO-N of 1.3 to 3.3 mg L in shallow groundwater. Enrichment of δN and δO of NO combined with water chemistry data indicates denitrification beneath the clayey basin and relatively conservative NO transport beneath the sandy basin. Soil-extractable NO-N was significantly lower and the copper-containing nitrite reductase gene density was significantly higher beneath the clayey basin. Differences in moisture retention capacity between fine- and coarse-textured soils resulted in median volumetric gas-phase contents of 0.04 beneath the clayey basin and 0.19 beneath the sandy basin, inhibiting surface/subsurface oxygen exchange beneath the clayey basin. Results can inform development of soil amendments to maintain elevated moisture content in shallow soils of stormwater infiltration basins, which can be incorporated in improved best management practices to mitigate NO impacts.     

Ground water stratification and delivery of nitrate to an incised stream under varying flow conditions

Ground water processes affecting seasonal variations of surface water nitrate concentrations were investigated in an incised first-order stream in an agricultural watershed with a riparian forest in the coastal plain of Maryland. Aquifer characteristics including sediment stratigraphy, geochemistry, and hydraulic properties were examined in combination with chemical and isotopic analyses of ground water, macropore discharge, and stream water. The ground water flow system exhibits vertical stratification of hydraulic properties and redox conditions, with sub-horizontal boundaries that extend beneath the field and adjacent riparian forest. Below the minimum water table position, ground water age gradients indicate low recharge rates (2-5 cm yr(-1)) and long residence times (years to decades), whereas the transient ground water wedge between the maximum and minimum water table positions has a relatively short residence time (months to years), partly because of an upward increase in hydraulic conductivity. Oxygen reduction and denitrification in recharging ground waters are coupled with pyrite oxidation near the minimum water table elevation in a mottled weathering zone in Tertiary marine glauconitic sediments. The incised stream had high nitrate concentrations during high flow conditions when much of the ground water was transmitted rapidly across the riparian zone in a shallow oxic aquifer wedge with abundant outflow macropores, and low nitrate concentrations during low flow conditions when the oxic wedge was smaller and stream discharge was dominated by upwelling from the deeper denitrified parts of the aquifer. Results from this and similar studies illustrate the importance of near-stream geomorphology and subsurface geology as controls of riparian zone function and delivery of nitrate to streams in agricultural watersheds.     

Transport of phosphate through artificial macropores during film and pulse flow

Flow through artificial macropores may occur as a water film along the macropore walls (film flow) or as moving water segments separated by air bubbles (pulse flow). To investigate the effect of macropore flow pattern (i.e., film and pulse flow) on the interaction of solutes with macropore walls, we studied orthophosphate (P) transport and sorption in artificial macropores. The experimental setup consisted of a column (height = 20 cm, diameter = 20 cm) homogenously packed with glass beads and fitted at outflow with a vertical artificial macropore placed below the column. The artificial macropore consisted of ceramic tubes (3 or 8 mm i.d.; 31.5 cm long) coated on the inside with iron oxide serving as phosphate sorbents. An orthophosphate solution containing 0.04 mg P L(-1) was applied at a rate of 9 to 12 mm h(-1) to the column, eventually causing macropore flow. In the 8-mm-i.d. tubes only film flow occurred. Pulse flow was dominating in the 3-mm-i.d. tubes. Generally, the flow patterns were reproducible and seldom did pulse flow replaced film flow or vice versa. During film flow, a significantly larger decrease in macropore P concentration per tube was observed relative to that with pulse flow events. However, pulse and film flow lead to almost the same amounts of P sorbed per unit surface area when exposed to the same solute P concentration. Comparison with P sorption capacity experiments indicated that the sorption rate, rather than the sorption capacity, controls the amount of sorbed P during macropore flow in the studied system.     

Overland and near-surface transport of Cryptosporidium parvum from vegetated and nonvegetated surfaces

Understanding microbial pathogen transport patterns in overland flow is important for developing best management practices for limiting microbial transport to water resources. Knowledge about the effectiveness of vegetative filter strips (VFS) to reduce pathogen transport from livestock confinement areas is limited. In this study, overland and near-surface transport of Cryptosporidium parvum has been investigated. Effects of land slopes, vegetation, and rainfall intensities on oocyst transport were examined using a tilting soil chamber with two compartments, one with bare ground and the other with brome (Bromus inermis Leyss.) vegetation. Three slope conditions (1.5, 3.0, and 4.5%) were used in conjunction with two rainfall intensities (25.4 and 63.5 mm/h) for 44 min using a rainfall simulator. The vegetative surface was very effective in reducing C. parvum in surface runoff. For the 25.4 mm/h rainfall, the total percent recovery of oocysts in overland flow from the VFS varied from 0.6 to 1.7%, while those from the bare ground condition varied from 4.4 to 14.5%. For the 63.5 mm/h rainfall, the recovery percentages of oocysts varied from 0.8 to 27.2% from the VFS, and 5.3 to 59% from bare-ground conditions. For all slopes and rainfall intensities, the total (combining both surface and near-surface) recovery of C. parvum oocysts was considerably less from the vegetated surface than those from the bare-ground conditions. These results indicate that the VFS can be a best management practice for controlling C. parvum in runoff from animal production facilities.     

Modeling macropore flow effects on pesticide leaching: inverse parameter estimation using microlysimeters

Macropore flow is a key factor determining pesticide fate, but models accounting for this process need parameters that cannot be easily measured. This study was conducted to investigate the use of inverse techniques to estimate parameters controlling macropore flow and pesticide fate in the dual-permeability model MACRO. Undisturbed columns were sampled at three landscape positions (hilltop, slope, hollow) with contrasting texture and organic carbon content. Transient leaching experiments were performed for an anionic tracer and the herbicide MCPA (4-chloro-2methylphenoxy acetic acid) during a 4-mo period, first under natural rainfall, and then under controlled irrigation in the laboratory. The tracer breakthrough for the liner-textured soil from the hilltop showed strong evidence of macropore flow, resulting in a rapid leaching of MCPA, while leaching was minimal from the organic-rich hollow soil, since macropore flow was weaker and adsorption stronger. The MACRO model was linked to the inverse modeling program SUFI (Sequential Uncertainty Fitting) to enable calibration of nine key model parameters. Based on calculated model efficiencies, MACRO-SUFI gave generally good predictions of water movement and tracer and pesticide transport, although some errors were attributed to difficulties in simulating the effects of soil moisture on degradation and the timing of water outflows. Even after calibration, significant uncertainties remained for some key parameters controlling macropore flow. Nevertheless, the parameter estimates were significantly different between landscape positions and could also be related to basic soil properties. The posterior uncertainty ranges could probably be reduced with a more exhaustive sampling of the parameter space and improved experimental designs.     

Predicting phosphorus losses with the PLEASE model on a local scale in Denmark and the Netherlands

To reduce losses from agricultural soils to surface water, mitigation options have to be implemented as a local scale. For a cost-effective implementation of these measures, an instrument to identify critical areas for P leaching is indispensable. In many countries, P-index methods are used to identify areas as risk for P losses to surface water. In flat areas, where losses by leaching are dominant, these methods have their limitations because leaching is often not described in detail, PLEASE, is a simple mechanistic model designed to stimulate P Losses by leaching at the field scale using a limited amount of local field data. In this study, PLEASE, was applied to 17 lowland sites in Denmark and 14 lowland sites in the Netherlands. Results show that the simple model simulated measured fluxes and concentrations in water from pipe drains, suction cups, and groundwater quite well. The modeling efficiency ranged from 0.92 for modeling total-P fluxes to 0.36 fr modeling concentrations in groundwater. Poor results were obtained for heavy clay soils and eutrophic peat soils, where fluxes and concentration were strongly underestimated by the model. The poot performance for the heavy clay soil can be explained by the transport of P through macropores to the drain pipes and the underestimation of overland flow on this heavy-textured soil. In the eutrophic peat soils, fluxes were underestimated due to the release of P from deep soil layers.     

Regionalizing potential for microbial bypass flow through New Zealand soils

Microbial breakthrough curves of 12 soils, generated by the application of dairy shed effluent followed by continuous artificial rainfall for one pore volume at 5 mm h(-1) onto large undisturbed soil cores, have been ranked as high, medium, or low potential for microbial bypass flow. The ranking is based on the position of the peak in the breakthrough curve. Knowledge of soil properties that affect microbial transport through soil gained from the microbial breakthrough curves was linked to soil classes, or to their accessory properties, of the New Zealand Soil Classification. Spatial depiction of the ratings has been achieved via the national 1:50,000 scale soil map. Soils with a drainage impediment or those with well developed soil structure have a high potential for microbial bypass flow, whereas soils from tephra and Recent Soils with less developed, porous, soil structure have a low potential for microbial bypass flow. The risk rankings should be considered as maxima because management may change some rankings.     

Effect of soil properties on saturated and unsaturated virus transport through columns

Viruses from contaminant sources can be transported through porous media to drinking water wells. The objective of this study was to investigate inactivation and sorption of viruses during saturated and unsaturated transport in different soils. Bacteriophages phiX174 and MS-2, and Br- tracer in a phosphate-buffered saline solution were introduced into saturated and unsaturated soil columns as a step function under constant flow rate and hydraulic conditions. Results showed that significantly greater virus removal occurred in the unsaturated columns than in the saturated columns in the two soils containing high metal oxides content. However, the increase in virus retention under unsaturated conditions was not significant in two other soils having high phosphorus and calcium contents and high pH, and in another soil with high organic matter content. The results imply that the extent of water content effect on inactivation and sorption of viruses can range from significant to minimal depending on the properties of the transport medium. We found that the presence of in situ metal oxides was a significant factor responsible for virus sorption and inactivation. Therefore, soils with high metal oxides content may have the potential to be used as hydrological barriers in preventing microbial contamination in the subsurface environments. We also found that the water content effect on virus removal and inactivation strongly depended on solid properties of the testing medium.     

Field-scale preferential transport of water and chloride tracer by depression-focused recharge

A tracer study was initiated in November 1993 to investigate depression-focused recharge and to monitor solute movement through the vadose zone into the shallow ground water in southeastern North Dakota. Granular potassium chloride (KCl) was surface-applied to two areas overlying subsurface drains and to one area instrumented with soil solution samplers, ground water monitoring wells, time domain reflectometry (TDR) probes, and temperature probes. One of the subsurface drain tracer plots was located on level ground while the other two sites were in small topographic depressions. Formation of ground water mounds beneath the depressions indicated that these areas are recharge sites. The applied Cl- tracer was found to move rapidly to the shallow ground water under the depressional areas after infiltration of spring snowmelt in 1994. Excessive rainfall events were also responsible for focused recharge and the rapid transport of the applied Cl- tracer. Water flow through partially frozen soil at the bottom of the depressions during thaw enhanced preferential movement of the tracer.     

Biosolid colloid-mediated transport of copper, zinc, and lead in waste-amended soils

Increasing land applications of biosolid wastes as soil amendments have raised concerns about potential toxic effects of associated metals on the environment. This study investigated the ability of biosolid colloids to transport metals associated with organic waste amendments through subsurface soil environments with leaching experiments involving undisturbed soil monoliths. Biosolid colloids were fractionated from a lime-stabilized, an aerobically digested, and a poultry manure organic waste and applied onto the monoliths at a rate of 0.7 cm/h. Eluents were monitored for Cu, Zn, Pb, and colloid concentrations over 16 to 24 pore volumes of leaching. Mass-balance calculations indicated significantly higher (up to 77 times) metal elutions in association with the biosolid colloids in both total and soluble fractions over the control treatments. Eluted metal loads varied with metal, colloid, and soil type, following the sequences Zn = Cu > Pb, and ADB > PMB > LSB colloids. Colloid and metal elution was enhanced by decreasing pH and colloid size, and increasing soil macroporosity and organic matter content. Breakthrough curves were mostly irregular, showing several maxima and minima as a result of preferential macropore flow and multiple clogging and flushing cycles. Soil- and colloid-metal sorption affinities were not reliable predictors of metal attenuation/elution loads, underscoring the dynamic nature of transport processes. The findings demonstrate the important role of biosolid colloids as contaminant carriers and the significant risk they pose, if unaccounted, for soil and ground water contamination in areas receiving heavy applications of biosolid waste amendments.     

Transport of di(2-ethylhexyl)phthalate (DEHP) applied with sewage sludge to undisturbed and repacked soil columns

Municipal sewage sludge is often used on arable soils as a source of nitrogen and phosphorus, but it also contains organic contaminants that may be leached to the ground water. Di(2-ethylhexyl)phthalate (DEHP) is a priority pollutant that is present in sewage sludge in ubiquitous amounts. Column experiments were performed on undisturbed soil cores (20-cm depth x 20-cm diameter) with three different soil types: a sand, a loamy sand, and a sandy loam soil. Dewatered sewage sludge was spiked with 14C-labeled DEHP (60 mg kg(-1)) and bromide (5 g kg(-1)). Sludge was applied to the soil columns either as five aggregates, or homogeneously mixed with the surface layer. Also, two leaching experiments were performed with repacked soil columns (loamy sand and sandy loam soil). The DEHP concentrations in the effluent did not exceed 1.0 microg L(-1), and after 200 mm of outflow less than 0.5% of the applied amount was recovered in the leachate in all soils but the sandy loam soil with homogeneous sludge application (up to 3.4% of the applied amount recovered). In the absence of macropore flow, DEHP in the leachate was primarily sorbed to mobilized dissolved organic macromolecules (DOM, 30.3 to 81.3%), while 2.4 to 23.6% was sorbed to mobilized mineral particles. When macropore flow occurred, this changed to 16.5 to 37.4% (DOM) and 36.9 to 40.6% (mineral particles), respectively. The critical combination for leaching of considerable amounts of DEHP was homogeneous sludge application and a continuous macropore structure.     

Design and risk assessment tool for vegetative treatment areas receiving agricultural wastewater: Preliminary results

Vegetative treatment areas (VTAs) are commonly being used as an alternative method of agricultural process wastewater treatment. However, it is also apparent that to completely prevent discharge of pollutants to the surrounding environment, settling of particulates and bound constituents from overland flow through VTAs is not sufficient. For effective remediation of dissolved agricultural pollutants, VTAs must infiltrate incoming wastewater. A simple water balance model for predicting VTA soil saturation and surface discharge in landscapes characterized by sloping terrain and a shallow restrictive layer is presented and discussed. The model accounts for the cumulative effect of successive rainfall events and wastewater input on soil moisture status and depth to water table. Nash–Sutcliffe efficiencies ranged from 0.65 to 0.81 for modeled and observed water table elevations after calibration of saturated hydraulic conductivity. Precipitation data from relatively low, average, and high annual rainfall years were used with soil, site, and contributing area data from an example VTA for simulations and comparisons. Model sensitivity to VTA width and contributing area (i.e. barnyard, feedlot, silage bunker, etc.) curve number was also investigated. Results of this analysis indicate that VTAs should be located on steeper slopes with deeper, more-permeable soils, which effectively lowers the shallow water table. In sloping landscapes (>2%), this model provides practitioners an easy-to-use VTA design and/or risk assessment tool that is more hydrological process-based than current methods.     

Evaluation of attachment of Cryptosporidium parvum and Giardia lamblia to soil particles

Transport of Cryptosporidium parvum oocysts and Giardia lamblia cysts in the aquatic environment is poorly understood. Information about their transport is essential for actual risk assessment and development of effective control practices. Several studies have suggested that attachment to soil particles is not likely to occur, but the hypothesis has not been well tested, partly because enumeration of C. parvum oocysts or G. lamblia cysts [written as (oo)cysts] in the presence of soil has been difficult. In this paper, a combination of flow cytometry, and epifluorescence and confocal microscopy was successfully used to enumerate (oo)cysts in the presence of soil and determine whether (oo)cysts travel freely in water or attached to soil particles. The maximum soil concentration in water samples for reliable enumeration of (oo)cysts was 2 mg/L. Particle attachment experiments detected attached pairs of oppositely charged beads and (oo)cysts, while no attachment was observed between like charged beads, (oo)cysts, and soil particles. These results support the hypothesis that electrostatic forces govern the interaction between (oo)cysts and soil particles. Batch experiments further confirmed the null hypothesis (p > 0.05) that (oo)cysts do not attach to natural soil particles. These findings suggest that, when (oo)cysts have been entrained in overland flow (i.e., runoff), they will travel freely in the water and not as part of the particulate sediment load.     

Effects of pH and manure on transport of sulfonamide antibiotics in soil

Sulfonamide antibiotics are a commonly used group of compounds in animal husbandry. They are excreted with manure, which is collected in a storage lagoon in certain types of confined animal feeding operations. Flood irrigation of forage fields with this liquid manure creates the potential risk of groundwater contamination in areas with shallow groundwater levels. We tested the hypothesis that-in addition to the soil characteristics-manure as cosolute and manure pH are two major parameters influencing sulfonamide transport in soils. Solute displacement experiments in repacked, saturated soil columns were performed with soil (loamy sand) and manure from a dairy farm in California. Breakthrough of nonreactive tracer and sulfadimethoxine, sulfamethazine, and sulfamethoxazole at different solution pH (5, 6.5, 8.5) with and without manure was modeled using Hydrus-1D to infer transport and reaction parameters. Tracer and sulfonamide breakthrough curves were well explained by a model concept based on physical nonequilibrium transport, equilibrium sorption, and first-order dissipation kinetics. Sorption of the antibiotics was low ( K? ≤ 0.7 L kg) and only weakly influenced by pH and manure. However, sulfonamide attenuation was significantly affected by both pH and manure. The mass recovery of sulfonamides decreased with decreasing pH, e.g., for sulfamethoxazole from 77 (pH 8.5) to 56% (pH 5). The sulfonamides were highly mobile under the studied conditions, but manure application increased their attenuation substantially. The observed attenuation was most likely caused by a combination of microbial transformation and irreversible sorption to the soil matrix.     

Distribution of phosphorus in manure slurry and its infiltration after application to soils

Computer models help identify agricultural areas where P transport potential is high, but commonly used models do not simulate surface application of manures and P transport from manures to runoff. As part of an effort to model such P transport, we conducted manure slurry separation and soil infiltration experiments to determine how much slurry P infiltrates into soil after application but before rain, thus becoming less available to runoff. We applied dairy and swine slurry to soil columns and after both 24 and 96 h analyzed solids remaining on the soil surface for dry matter, total phosphorus (TP), and water-extractable inorganic (WEIP) and organic (WEOP) phosphorus. We analyzed underlying soils for Mehlich-3 and water-extractable P. We also conducted slurry separation experiments by sieving, centrifuging, and suction-filtering to determine which method could easily estimate slurry P infiltration into soils. About 20% of slurry solids and 40 to 65% of slurry TP and WEIP infiltrated into soil after application, rendering this P less available to transport in runoff. Slurry separation by suction-filtering through a screen with 0.75-mm-diameter openings was the best method to estimate this slurry P infiltration. Measured quantities of manure WEOP changed too much during experiments to estimate WEOP infiltration into soil or what separation method can approximate infiltration. Applying slurries to soils always increased soil P in the top 0 to 1 cm of soil, frequently in the 1- to 2-cm depth of soil, but rarely below 2 cm. Future research should use soils with coarser texture or large macropores, and slurry with low dry matter content (1-2%).     

Transport and biodegradation of perchlorate in soils

Perchlorate (ClO4-) contamination of ground water and surface water is a widespread problem, particularly in the western United States. This study examined the effect of biodegradation on perchlorate fate and transport in soils. Solute transport experiments were conducted on two surface soils. Pulses of solution containing perchlorate and Br- were applied to saturated soil columns at steady state water flow. Perchlorate behaved like a nonreactive tracer in Columbia loam (coarse-loamy, mixed, superactive, nonacid, thermic Oxyaquic Xerofluvent) but was degraded in Yolo loam (fine-silty, mixed, superactive, nonacid, thermic Mollic Xerofluvent). Batch experiments demonstrated that perchlorate removal from solution in Yolo loam was caused by biodegradation. Other batch experiments with Yolo loam surface and subsurface soils, Columbia loam surface soil, and dredge tailings demonstrated that perchlorate biodegradation required anaerobic conditions, an adequate carbon source, and an active perchlorate-degrading microbial population. The sequential reduction of perchlorate and NO3- by an indigenous soil microbial community in Yolo loam batch systems was also studied. Nitrate reduction occurred much sooner than perchlorate reduction in soils that had not been previously exposed to perchlorate, but NO3- and perchlorate were simultaneously reduced in soils previously exposed to perchlorate. The results of this study have implications for in situ remediation schemes and for agricultural soils that have been contaminated by perchlorate-tainted irrigation water.