Ranked set sampling allocation models for multiple skewed variables: an application to agricultural data

The mean of a balanced ranked set sample is more efficient than the mean of a simple random sample of equal size and the precision of ranked set sampling may be increased by using an unbalanced allocation when the population distribution is highly skewed. The aim of this paper is to show the practical benefits of the unequal allocation in estimating simultaneously the means of more skewed variables through real data. In particular, the allocation rule suggested in the literature for a single skewed distribution may be easily applied when more than one skewed variable are of interest and an auxiliary variable correlated with them is available. This method can lead to substantial gains in precision for all the study variables with respect to the simple random sampling, and to the balanced ranked set sampling too.     

Design based estimation for ranked set sampling in finite populations

In this paper, we consider design-based estimation using ranked set sampling (RSS) in finite populations. We first derive the first and second-order inclusion probabilities for an RSS design and present two Horvitz–Thompson type estimators using these inclusion probabilities. We also develop an alternate Hansen–Hurwitz type estimator and investigate its properties. In particular, we show that this alternate estimator always outperforms the usual Hansen–Hurwitz type estimator in the simple random sampling with replacement design with comparable sample size. We also develop formulae for ratio estimator for all three developed estimators. The theoretical results are augmented by numerical and simulation studies as well as a case study using a well known data set. These show that RSS design can yield a substantial improvement in efficiency over the usual simple random sampling design in finite populations.     

Best linear unbiased estimators for the simple linear regression model using ranked set sampling

When sample observations are expensive or difficult to obtain, ranked set sampling is known to be an efficient method for estimating the population mean, and in particular to improve on the sample mean estimator. Using best linear unbiased estimators, this paper considers the simple linear regression model with replicated observations. Use of a form of ranked set sampling is shown to be markedly more efficient for normal data when compared with the traditional simple linear regression estimators.     

Sampling from partially rank-ordered sets

In this paper we introduce a new sampling design. The proposed design is similar to a ranked set sampling (RSS) design with a clear difference that rankers are allowed to declare any two or more units are tied in ranks whenever the units can not be ranked with high confidence. These units are replaced in judgment subsets. The fully measured units are then selected from these partially ordered judgment subsets. Based on this sampling scheme, we develop unbiased estimators for the population mean and variance. We show that the proposed sampling procedure has some advantages over standard ranked set sampling.     

The Relative Efficiency of Ranked Set Sampling in Ordinary Least Squares Regression

Ranked set sampling was developed for situations where measurement cost is expensive compared with unit acquisition. This paper presents results of simulations and theory examining the impact of balanced ranked set sampling on the relative efficiencies of the slope and intercept estimators of an ordinary least squares regression. Perfect ranking of either the independent or the dependent variable is assumed throughout. In contradistinction to most of the published ranked set sampling work, it is demonstrated that balanced ranked set sampling offers at most little improvement in the relative efficiencies of the slope estimator at any sample size.     

Randomly selected order statistics in ranked set sampling: A less expensive comparable alternative to simple random sampling

Rank-based sampling designs are powerful alternatives to simple random sampling (SRS) and often provide large improvements in the precision of estimators. In many environmental, ecological, agricultural, industrial and/or medical applications the interest lies in sampling designs that are cheaper than SRS and provide comparable estimates. In this paper, we propose a new variation of ranked set sampling (RSS) for estimating the population mean based on the random selection technique to measure a smaller number of observations than RSS design. We study the properties of the population mean estimator using the proposed design and provide conditions under which the mean estimator performs better than SRS and some existing rank-based sampling designs. Theoretical results are augmented with some numerical studies and a real-life example, where we also study the performance of our proposed design under perfect and imperfect ranking situations.     

Ranked set sampling: its essence and some new applications

Ranked set sampling is a simple idea of great use. It was proposed half a century ago. The last 15 years or so have witnessed considerable development in the research and applications of ranked set sampling. In this paper, we give an overview on ranked set sampling. We review several variants of ranked set sampling developed since the original idea was proposed. We discuss the essence and the theoretical foundation of ranked set sampling. We present some novel applications of ranked set sampling in areas such as clinical trials, genetic quantitative trait loci mappings and others. By doing so, we wish to provide the reader with a philosophical view on ranked set sampling and shed some lights on a broader range of its applications.     

The ‘Bayesics’ of Ranked Set Sampling

Ranked set sampling can be useful when measurements are expensive but units from the popu- lation can be easily ranked. In this situation one may draw k units from the population, rank them, select one on which to make the expensive measurement, draw another k units, rank them, select one, and so on. The method was originally suggested by McIntyre (1952) in connection with pasture yields and is obviously applicable in other situations as well. Dell and Clutter (1972) and Patil et al. (1994) explain the basics from a classical point of view. Our aim is to examine the procedure from a Bayesian point of view, determine whether ranked set sampling provides advantages over simple random sampling and explore some optimality questions     

Asymptotics in adaptive cluster sampling

In this article we consider asymptotic properties of the Horvitz-Thompson and Hansen-Hurwitz types of estimators under the adaptive cluster sampling variants obtained by selecting the initial sample by simple random sampling without replacement and by unequal probability sampling with replacement. We develop an asymptotic framework, which basically assumes that the number of units in the initial sample, as well as the number of units and networks in the population tend to infinity, but that the network sizes are bounded. Using this framework we prove that under each of the two variants of adaptive sampling above mentioned, both the Horvitz-Thompson and Hansen-Hurwitz types of estimators are design-consistent and asymptotically normally distributed. In addition we show that the ordinary estimators of their variances are also design-consistent estimators.     

Nonparametric mean estimation using partially ordered sets

In ranked-set sampling (RSS), the ranker must give a complete ranking of the units in each set. In this paper, we consider a modification of RSS that allows the ranker to declare ties. Our sampling method is simply to break the ties at random so that we obtain a standard ranked-set sample, but also to record the tie structure for use in estimation. We propose several different nonparametric mean estimators that incorporate the tie information, and we show that the best of these estimators is substantially more efficient than estimators that ignore the ties. As part of our comparison of estimators, we develop new results about models for ties in rankings. We also show that there are settings where, to achieve more efficient estimation, ties should be declared not just when the ranker is actually unsure about how units rank, but also when the ranker is sure about the ranking, but believes that the units are close.     

Combining ranking information in judgment post stratified and ranked set sampling designs

Judgment post stratified (JPS) and ranked set sampling (RSS) designs rely on the ability of a ranker to assign ranks to potential observations on available experimental units. In many settings, there are often more than one rankers available and each of these rankers provide judgment ranks. This paper proposes two sampling schemes, one for JPS and the other for RSS, to combine the judgment ranks of these rankers to produce a strength of agreement measure for each fully measured unit. This strength measure is used to draw inference for the population mean and cumulative distribution function. The paper shows that the estimators constructed based on this strength measure provide a substantial improvement over the same estimators based on judgment ranking information of a single best ranker.     

On ranked set sampling for multiple characteristics

We consider the selection of samples in ranked set sampling when several attributes of each sample are of interest. We describe approaches that have appeared previously in the literature and present a novel method that seeks to achieve samples that are nearly balanced with respect to the ranks of all attributes. This method is shown to result in very little loss of precision compared to problems in which only a single sample attribute is of interest.     

Multiple reproductive strategies in a tropical hover wasp

Reproductive skew theory has been an important component of efforts to design a unifying theory of social evolution, as it aims to explain patterns of reproductive partitioning in animal societies as a function of relatedness, group productivity, fighting ability and ecological constraints on independent reproduction. However, empirical tests of the theory have often provided ambiguous or non-conclusive results, assumptions behind alternative models have rarely been tested, and theoretical elaborations have shown the limitations of the reproductive skew approach. Here we analyse a relatively large sample of colonies of the Stenogastrine wasp Parischnogaster mellyi with a powerful set of DNA microsatellite markers. We show that various apparently stable forms of social organisation co-exist in a single population, and that sharing of reproduction between related and unrelated egg-laying females occurs in some of the nests. Present reproductive skew theory appears to be at best partly sufficient to account for the observed complexity of social organisation. The observed patterns of colony composition and reproductive sharing are weakly consistent with the hypothesis of reproductive transactions, while they can more parsimoniously be explained by the life-history characteristics of the species.Communicated by R.F.A. Moritz     

Estimation of Normal Variance Based on Balanced and Unbalanced Ranked Set Samples

In this paper we address the problem of estimation of the variance of a normal population based on a balanced as well as an unbalanced ranked set sample (RSS), which is a modification of the original RSS of McIntyre (1952).We have proposed several methods of estimation of variance by combining different unbiased between and within estimators, and compared their performances     

Bimodal distribution of organochlorine insecticide levels in soil due to emulsion spraying

Concentrations (c) of lindane and technical DDT have been determined in about 60 soil samples, randomly taken from a 10 × 10 m² plot of bare soil one day after spraying. These experimental c, log c data, and literature data for dieldrin are used to examine the various residue distributions in cultivated and uncultivated soil plots. The normality of these distributions is examined with some statistical tests. All c distribution curves are more or less skew to higher c levels. From the pooled cumulative distribution curve and frequency histogram it is concluded that the found c distributions can be characterized best as bimodal.

Finally, some practical recommendations are given for cost‐effective soil sampling.     

Design-based ranked set sampling using auxiliary variables

A ranked set sampling protocol is proposed when an auxiliary variable is available in addition to the target variable in sample surveys. The protocol may be practically carried out without additional sampling effort or costs. Under the suggested sampling scheme, the estimators usually adopted in surveys with auxiliary information - such as the ratio estimator or the regression estimator - display surprising theoretical properties as well as high performance in practice.     

Sample based estimation of landscape metrics; accuracy of line intersect sampling for estimating edge density and Shannon’s diversity index

A recent trend is to estimate landscape metrics using sample data and cost-efficiency is one important reason for this development. In this study, line intersect sampling (LIS) was used as an alternative to wall-to-wall mapping for estimating Shannon’s diversity index and edge length and density. Monte Carlo simulation was applied to study the statistical performance of the estimators. All combinations of two sampling designs (random and systematic distribution of transects), four sample sizes, five transect configurations (straight line, L, Y, triangle, and quadrat), two transect orientations (fixed and random), and three configuration lengths were tested, each with a large number of simulations. Reference was 50 photos of size 1 km², already manually delineated in vector format by photo interpreters using GIS environment. The performance was compared by root mean square error (RMSE) and bias. The best combination for all three metrics was found to be the systematic design and as response design the straight line configuration with random orientation of transects, with little difference between the fixed and random orientation of transects. The rate of decrease of RMSE for increasing sample size and line length was studied with a mixed linear model. It was found that the RMSE decreased to a larger degree with the systematic design than the random one, especially with increasing sample size. Due to the nonlinearity in the definition of Shannon diversity estimator its estimator has a small and negative bias, decreasing with sample size and line length. Finally, a time study was conducted, measuring the time for registration of line intersections and their lengths on non-delineated aerial photos. The time study showed that long sampling lines were more cost-efficient than short ones for photo-interpretation.     

A performance indicator for ranked set sampling using ranking error probability matrix

Ranked set sampling (RSS) is a sampling procedure that has been shown to provide more efficient procedures than simple random sampling, in particular the Mann-Whitney-Wilcoxon (MWW) statistic and the empirical distribution function (EDF). We briefly review the work of Bohn (1992) and Stokes and Sager (1988) on the effect of imperfect ranking on the RSS-based MWW test and on the RSS-based EDF, respectively. We propose a model for a ranking error probability matrix which we hope will become a useful tool for evaluating RSS-based statistical procedures     

Adaptive two-stage one-per-stratum sampling

We briefly describe adaptive cluster sampling designs in which the initial sample is taken according to a Markov chain one-per-stratum design (Breidt, 1995) and one or more secondary samples are taken within strata if units in the initial sample satisfy a given condition C. An empirical study of the behavior of the estimation procedure is conducted for three small artificial populations for which adaptive sampling is appropriate. The specific sampling strategy used in the empirical study was a single random-start systematic sample with predefined systematic samples within strata when the initially sampled unit in that stratum satisfies C. The bias of the Horvitz-Thompson estimator for this design is usually very small when adaptive sampling is conducted in a population for which it is suited. In addition, we compare the behavior of several alternative estimators of the standard error of the Horvitz-Thompson estimator of the population total. The best estimator of the standard error is population-dependent but it is not unreasonable to use the Horvitz-Thompson estimator of the variance. Unfortunately, the distribution of the estimator is highly skewed hence the usual approach of constructing confidence intervals assuming normality cannot be used here.     

Detecting Rare Species with Random or Subjective Sampling: a Case Study of Red-Listed Saproxylic Beetles in Boreal Sweden

Abstract:  Efficient sampling design in field studies is important for economical and statistical reasons. We compared two ways to distribute sampling effort over an area, either randomly or subjectively. We searched for red-listed saproxylic (wood-living) beetles in 30 spruce stands in boreal Sweden by sifting wood from dead trees. We randomly selected positions within each stand with a geographic positioning system and sampled the nearest dead tree (random sample). In the same stand we also sampled dead trees that, based on literature, were likely to host such species (subjective sampling). The subjective sampling (two to five samples per stand, depending on stand size) was compared with the higher, random sampling effort (fixed level of 12 samples/stand). Subjective sampling was significantly more efficient. Red-listed species were found in 36% of the subjective samples and in 16% of the random samples. Nevertheless, the larger random effort resulted in a comparable number of red-listed species per stand and in 13 detected species in total (vs. 12 species with subjective sampling). Random sampling was less efficient, but provided an unbiased alternative more suitable for statistical purposes, as needed in, for example, monitoring programs. Moreover, new species-specific knowledge can be gained through random searches.