Effects of storage method and duration on the toxicity of marine sediments to embryos of Crassostrea gigas oysters

The objective of laboratory sediment bioassays is to estimate in situ toxicity. This goal is difficult to achieve, as one of the main limitations of sediment toxicity tests is disruption of sediment geochemistry during sampling, handling and preservation. The effects of storage on the estimation of marine sediment toxicity to Crassostrea gigas embryos and larvae were investigated. Three storage methods and four storage periods were compared with three different sediment types contaminated by heavy metals, polycyclic aromatic hydrocarbons (PAHs) and both contaminants. Freezing and freeze-drying considerably increased the toxicity of decanted sediments and their elutriates as compared to the toxicity obtained with fresh sediments. Concerning the elutriates, the toxicity found with frozen and freeze-dried sediments was correlated with DOC, ammonia and PAH contents. However, the toxicity of fresh sediments kept at 4 degrees C increased with increasing duration of storage and was also correlated with the amount of ammonia in the elutriates.     

Dissolution of resin acids, retene and wood sterols from contaminated lake sediments

The dissolution potency of hydrophobic resin acids (RAs), retene and wood sterols from sediments was studied. These wood extractives and their metabolites are sorbed from pulp and paper mill effluents to downstream sediments. With harmful components like these, sediments can pose a hazard to the aquatic environment. Therefore, sediment elutriates with water were produced under variable conditions (agitation rate and efficiency, time), and concentrations of the dissoluted compounds were analyzed. Both naturally contaminated field sediments and artificially spiked sediments were studied. By vigorous agitation RAs can be released fast from the sediment matrix and equilibrium reached within 3 days. Compared to RAs, desorption of retene from lake sediment was slower and did not completely reach equilibrium in 23 days. Sterols spiked to pristine sediment with a 33-day contact time desorbed faster than those associated authentically with industrial sediment of from a contaminated lake. Simulating the water turbulence adjacent to a sediment surface by low and high rate of agitation in the laboratory, an increase in the mixing rate after 43-day elutriation suddenly released a high amount of wood sterols. The results indicate wide variation between hazardous chemicals in their tendency to dissolution from sediment solids. Erosion and hydrology adjacent to the sediment surface, as well as risks from dredging activities of sediments, may expose lake biota to bioactive chemicals.     

Ex situ remediation of contaminated sediments using mineral additives: assessment of pollutant bioavailability with the Microtox solid phase test

The aim of this work is to assess the potential ecotoxicological effects of contaminated sediments treated with mineral additives. The Microtox solid phase test was used to evaluate the effect of mineral additives on the toxicity of sediment suspensions. Four Mediterranean port sediments were studied after dredging and bioremediation: Sample A from navy harbor, sample B from commercial port and samples C and D from pleasure ports. Sediment samples were stabilized with three mineral additives: hematite, zero-valent iron and zeolite. Results show that all studied mineral additives can act as stabilizer agent in highly contaminated sediments (A and C) by decreasing dissolved metal concentrations and sediment toxicity level. On the contrary, for the less contaminated samples (B and D) hematite and zeolite can provoke toxic effect towards Vibrio fischeri since additive particles can favor bacteria retention and decrease bioluminescence emission.     

Assessing PAH and PCB emissions from the relocation of harbour sediments using equilibrium passive samplers

Large-scale dredging of contaminated sediments is taking place in the harbor of Oslo, Norway. The dredged sediment masses are transferred into a confined aquatic disposal facility (CAD) in a natural 70-m deep basin within the Oslofjord. Currently there is no established method to determine how much dissolved contaminants are released during relocation and deposition of these sediments. For this reason we tested the use of equilibrium passive samplers consisting of 55 microm thin polyoxymethylene (POM-55) for studying the release of freely dissolved and thus bioavailable PAHs and PCBs at the disposal site, and found this to be a suitable method. In order to use POM-55 for monitoring PCBs, it was necessary to measure their POM-55/water partition coefficients, which was also presented as part of this study. Elevated turbidity (average 4.1 mg l(-1)) was observed at one side of the basin where no natural sill exists. Analysis of POM-55 at this location before and after deposition revealed that there was an increase in freely dissolved concentrations (C(W,free)) during deposition by a factor 37.5 for PAHs and a factor of 2.9 for PCBs. In addition, during deposition phenanthrene-to-anthracene aqueous concentration ratios at this location (values of 3-4) were more similar to those of the deposited sediments (approximately 2) than to those of the CAD water prior to deposition (approximately 14). This was not observed for the other locations where a natural sill exists at approximately 30 m water depth. The POM-55 equilibrium passive samplers are here shown to be useful tools for measuring and understanding the dynamics involved in the release of dissolved contaminants during sediment relocation.     

The toxicity of composted sediments from Mediterranean ports evaluated by several bioassays

This work investigates the ecotoxicological evaluation of contaminated dredged sediments from French Mediterranean navy harbour (A), commercial port (B) and two composite specimens (C) and (D) coming from the mixture of A and B with other port sediments. The toxicity of elutriates from these sediments is estimated using embryo-toxicity test, Microtox® solid phase test, LuminoTox, phytotoxicity tests and genotoxicity test. Bioassay responses are not clearly correlated with chemical contamination in the whole sediment and vary as a function of tested organisms. The highest contaminated samples (A and C) are almost always more toxic than the less contaminated samples (B and D). Among composite sediments, the mixture effect with other sediments is not efficient to decrease toxicity in sample C, suggesting that other parameters influence toxicity level such as particle size or organic matter content. These parameters should be taken into consideration in order to improve the efficiency of the mixture process and produce composite sediments with low toxicity.     

Seasonal variation of sediment toxicity in the Rivers Dommel and Elbe

Contaminated sediment in the river basin has become a source of pollution with increasing importance to the aquatic ecosystem downstream. To monitor the temporal changes of the sediment bound contaminants in the River Elbe and the River Dommel monthly toxicity tests were applied to layered sediment and river water samples over the course of 10 months. There is an indication that contaminated sediments upstream adversely affected sediments downstream, but this process did not cause a continuous increase of sediment toxicity. A clear decrease of toxic effects in water and upper layer sediment was observed at the River Elbe station in spring related to high water discharge and algal blooms. The less obvious variation of sediment toxicity in the River Dommel could be explained by stable hydrological conditions. Future monitoring programmes should promote a more frequent and intensive sampling regime during these particular events for ecotoxicological evaluation.     

Development and application of a sediment toxicity test using the benthic cladoceran Chydorus sphaericus

This study reports on the development and application of a whole sediment toxicity test using a benthic cladoceran Chydorus sphaericus, as an alternative for the use of pelagic daphnids. A C. sphaericus laboratory culture was started and its performance under control conditions was optimised. The test was firstly validated by determining dose-response relationships for aqueous cadmium and copper and ammonia, showing a sensitivity of C. sphaericus (96 h LC(50) values of 594 microg Cd/L, 191 microg Cu/L and 46 mg ammonia/L at pH 8) similar to that of daphnids. Next, sediment was introduced into the test system and a series of contaminated sediments from polluted locations were tested. A significant negative correlation between survival and toxicant concentrations was observed. It is concluded that the test developed in the present study using the benthic cladoceran C. sphaericus is suitable for routine laboratory sediment toxicity testing.     

Metal equilibration in laboratory-contaminated (spiked) sediments used for the development of whole-sediment toxicity tests

The equilibration and bioavailability of metals in laboratory-contaminated sediments have been investigated in order to provide better guidance on acceptable procedures for spiking sediments with metals for use in the development of whole-sediment toxicity tests. The equilibration rates of Cd, Cu, Ni and Zn spiked into three estuarine surface sediments with varying properties were investigated. Changes to sediment pH, redox potential, porewater and acid-soluble metals, acid-volatile sulfide and bacterial activity during equilibration, effects of temperature and disturbances following equilibration are reported. The addition of metals to sediments caused major decreases in pH and increases in redox potential as metals displaced iron(II) into the porewaters and added metals and iron (following oxidation) were hydrolyzed. The rates of equilibration of metals in porewaters varied considerably and were dependent on sediment and metal properties. For the oxic/sub-oxic sediments studied, metal-spikes of Cd, Cu, Ni and Zn appeared near equilibrium after 25-45, 10-15, 30-70 and 20-40 days, respectively. Acid-soluble metal concentrations decreased during the equilibration period indicating that the metals become more strongly associated with the sediments with time (less bioavailable). Bacterial activity was greatest in the sediment equilibrated at pH 7 and decreased following the addition of metals. During the equilibration period, bacterial activity increased in sediments equilibrated at pH 6, remained low in sediments at pH 8 and varied erratically in sediments at pH 7. Spiked sediments were shown to equilibrate more slowly at lower temperatures resulting in high porewater metal concentrations. Disturbances to equilibrated sediments because of sample manipulation caused significant iron(II) oxidation and losses of metals from porewaters. The importance of documenting spiking and equilibration procedures and carefully measuring and reporting sediment parameters is highlighted so that contaminant bioavailability and exposure pathways can be interpreted and organism sensitivity accurately determined. Recommendations are given for the preparation of metal-spiked sediments for toxicity testing purposes.     

Evaluation of time-to-effects as a basis for quantifying the toxicity of contaminated sediments

Due to uncertainties as to appropriate procedures and dilution materials, most sediment tests are conducted only with undiluted, whole samples. Hence, it is not possible to use conventional concentration-response approaches to quantify toxicity of samples that elicit a 100% effect (e.g., mortality) at a preset test interval (typically 10 d). An alternative approach to quantifying the relative toxicity of test sediments is to determine time-to-effects. The objective of this study was to assess the utility of a time-to-effects approach for quantifying toxicity of freshwater sediments to the invertebrates Hyalella azteca and Chironomus tentans. Survival of both species and growth of C. tentans was determined using five sediments (four test samples and a control sediment) by destructively sampling replicate test chambers over the course of a "standard" 10-d assay. Studies with the control sediment and a non-toxic test sample indicated excellent recovery of test animals, even early in the test (e.g., <24 h) when individuals of both species are relatively small. Reasonable, typically monotonic, time-to-death relationships were observed for both H. azteca and C. tentans exposed to three comparatively toxic test sediments, all of which caused significant mortality by 10 d. Use of the time-to-effects approach allowed expression of toxicity of the three samples relative to one another, as well as documentation of decreases in toxicity of one of the sediments with increased storage time. These studies demonstrate the feasibility of use of time-to-effects as a basis for quantifying the relative toxicity of contaminated sediments.     

Chemical and ecotoxicological analyses of sediments and elutriates of contaminated rivers due to e-waste recycling activities using a diverse battery of bioassays

A multi-trophic, multi-exposure phase assessment approach was applied to characterize the toxicity of sediments collected from two rivers in Guiyu, China, an e-waste recycling centre. Elutriate toxicity tests (bacterium Vibrio fischeri and microalga Selenastrum capricornutum) and whole sediment toxicity test (crustacean Heterocypris incongruens) showed that most sediments exhibited acute toxicity, due to elevated heavy metals and PAHs levels, and low pH caused by uncontrolled acid discharge. The survival rates of crustaceans were negatively (p < 0.05) correlated with total PAHs in sediments (411-1755 mg kg⁻¹); EC50s of V. fischeri on the elutriates were significantly correlated with elutriate pH (p < 0.01). Significant (p < 0.05) correlations between the induction of hepatic metallothionein in tilapia (Oreochromis mossambicus) and metal concentrations (Cu, Zn, Pb) in sediments were also observed, when fish were fed with diets containing sediment. The results showed that uncontrolled e-waste recycling activities may bring adverse effects to local aquatic ecosystem.     

Sediment toxicity testing using large water-sediment ratios: an alternative to water renewal

Deterioration of overlying water quality during toxicity tests with benthic invertebrates is a serious problem with some sediments. One solution is periodic renewal of overlying water. However, this is either labour intensive or requires construction and maintenance of special equipment. Furthermore, water renewal has the potential for flushing toxic chemicals out of the test chamber and establishes nonequilibrium conditions between the water and sediment. An alternative is testing under static conditions using atypical test vessels (e.g. Imhoff settling cones) with a large water volume (1 l) overlaying a much smaller sediment volume (e.g. 15 ml). This results in dramatic improvement of overlying water quality compared to standard static toxicity tests. Compared to water renewal, the test method is much simpler, all toxic substances leached from the sediment are retained in the test vessel, and contaminant concentrations in water and sediment have more time to equilibrate. Chronic sediment toxicity tests (10-28 days) have been conducted successfully under these conditions with Chironomus riparius, Hexagenia sp., Hyalella azteca and Tubifex tubifex.     

Influence of Chironomus riparius (Diptera, Chironomidae) and Tubifex tubifex (Annelida, Oligochaeta) on oxygen uptake by sediments. Consequences of uranium contamination

The diffusive oxygen uptake (DOU) of sediments inhabited by Chironomus riparius and Tubifex tubifex was investigated using a planar oxygen optode device, and complemented by measurements of bioturbation activity. Additional experiments were performed within contaminated sediments to assess the impact of uranium on these processes. After 72 h, the two invertebrate species significantly increased the DOU of sediments (13-14%), and no temporal variation occurred afterwards. Within contaminated sediments, it was already 24% higher before the introduction of the organisms, suggesting that uranium modified the sediment biogeochemistry. Although the two species firstly reacted by avoidance of contaminated sediment, they finally colonized it. Their bioturbation activity was reduced but, for T. tubifex, it remained sufficient to induce a release of uranium to the water column and an increase of the DOU (53%). These results highlight the necessity of further investigations to take into account the interactions between bioturbation, microbial metabolism and pollutants.     

Guidelines for copper in sediments with varying properties

A major weakness of sediment quality guidelines (SQGs) is their poor ability to predict how toxicity thresholds change for different sediment types. Using species sensitivity distributions (SSDs) of copper effects data, new guidelines were derived for copper in non-sulfidic marine sediments in which organic carbon (OC) and particle size strongly influence copper bioavailability. The derived SQGs varied in a predictable manner with changes in sediment particle size and organic carbon (OC), and were shown to offer a significant improvement on the existing ‘single value’ SQG. Adequate protection for all benthic organisms is expected to be achieved for a OC-normalised copper concentration of 3.5 mg Cu g⁻¹ OC in the <63 μm sediment fraction. For short-term exposures, the equivalent acute guideline is 11 mg < 63 μm Cu g⁻¹ OC. The new SQGs incorporate a high degree of conservatism owing to the use of copper-spiked sediments and laboratory-based bioassays that were expected to result in greater metal exposure of organisms to bioavailable copper than would be expected for field-contaminated sediments with similar total copper concentrations. SQGs that vary with sediment properties were prepared in an easily referenced tabular format.     

Arsenic in marine sediments from French Mediterranean ports: Geochemical partitioning,bioavailability and ecotoxicology

This work investigates arsenic mobility, bioavailability and toxicity in marine port sediments using chemical sequential extraction and laboratory toxicity tests. Sediment samples were collected from two different Mediterranean ports, one highly polluted with arsenic and other inorganic and organic pollutants (Estaque port (EST)), and the other one, less polluted, with a low arsenic content (Saint Mandrier port (SM)). Arsenic distribution in the solid phase was studied using a sequential extraction procedure specifically developed for appraising arsenic mobility in sediments. Toxicity assessment was performed on sediment elutriates, solid phases and aqueous arsenic species as single substance using the embryo-toxicity test on oyster larvae (Crassostrea gigas) and the Microtox test with Vibrio fischeri. Toxicity results showed that all sediment samples presented acute and sub-chronic toxic effects on oyster larvae and bacteria, respectively. The Microtox solid phase test allow to discriminate As-contaminated samples from the less contaminated ones, suggesting that toxicity of whole sediment samples is related to arsenic content. Toxicity of dissolved arsenic species as single substance showed that Vibrio fischeri and oyster larvae are most sensitive to As(V) than As(III). The distribution coefficient (Kd) of arsenic in sediment samples was estimated using results obtained in chemical sequential extractions. The Kd value is greater in SM (450 L kg^?1) than in EST (55 L kg^?1), indicating that arsenic availability is higher for the most toxic sediment sample (Estaque port). This study demonstrates that arsenic speciation play an important role on arsenic mobility and its bioavailability in marine port sediments.     

The SeKT joint research project: definition of reference conditions, control sediments and toxicity thresholds for limnic sediment contact tests

- In current biotest approaches, intact organisms or in vitro systems are exposed to sediments using different exposure scenarios. The most important issue in sediment toxicity testing protocols is the question which test phase (solid or liquid) should be used. Whole-sediment exposure protocols represent the most realistic scenario to simulate in situ exposure conditions in the laboratory. However, until now there is no agreement in how to acquire and to evaluate the data of the various available sediment contact assays. The SeKT joint research project was initiated with the aim to compare recently developed sediment contact assays by addressing reference conditions, control sediments and toxicity thresholds for limnic sediment contact tests.     

Passive samplers versus surfactant extraction for the evaluation of PAH availability in sediments with variable levels of contamination

The purpose of this study was to test the efficiency of passive solid samplers, polyoxymethylene (POM) strips and polydimethylsiloxane (PDMS) silicon tubing, to predict the bioavailability of native PAHs in contaminated sediments. Results were compared with worm bioaccumulation data and solid/liquid extraction using the surfactant Brij((R)) 700 (B700). The two passive samplers were found to act differently. The PDMS sampler overestimated the availability of PAHs in all studied sediments. The POM method provided results in accordance with those obtained with the B700 extraction. However, POM and B700 methods underestimated PAH availability in low contaminated sediments where biological factors (digestible organic matter) become important. Bioavailability of total PAHs was correctly predicted by POM and B700 in highly contaminated aluminum smelter sediments. A closer examination of individual PAH results indicated that both techniques overestimated the availability of large molecules with logK(ow)>6 suggesting a biological mechanism limiting uptake of larger PAHs which seems to be related to the molecular size of compounds.     

Phagocytic response of macrophages from the pronephros of American plaice (Hipoglossoides platessoides) exposed to contaminated sediments from Baie des Anglais, Quebec.

Sediments of Baie des Anglais on the St. Lawrence estuary have a history of environmental contamination, but little information exists regarding their toxicity. The purpose of the present study was to determine the effects of contaminated Baie des Anglais sediments on American plaice (Hippoglossoides platessoides) immune function. Three sites in Baie des Anglais were selected which vary in proximity to local industries and in their sediment contaminant load. Sites 1 and 2 (within the bay) are the closest to shore and most heavily contaminated while sediments at Site 3, which is outside the bay, are the least contaminated. In the first experiment, American plaice were placed in cages at each site for three weeks and immune function was assessed by measuring the phagocytic activity of pronephric macrophages. At the time of sampling, plaice displayed pronephros cell immune response disturbances indicating that Site 1 and 2 were most toxic and Site 3 the least toxic. The results obtained for phagocytosis revealed that contaminants present in the sediments are bioavailable to fish, which came in contact with them and significantly affected their immune system. In the second experiment, sediments from the most toxic site, Site 1, were collected for a laboratory controlled experiment in which plaice were exposed for up to 3 months to these contaminated marine sediments, while the control group was exposed to relatively uncontaminated beach sand. At the end of the exposure period, plaice were transferred from contaminated sediment to beach sand and sampled one month later in order to determine if immune function had returned to control levels. The total number of macrophages decreased following three months of exposure, while the active macrophages had already decreased after the first month of exposure. Following the rehabilitation period a significant trend toward normal response was noted. Sediments from Baie des Anglais contain primarily less highly chlorinated PCBs and lower concentrations of the intermediate and highly chlorinated PCBs. The total concentration of PCBs (sum of 20 congeners) in the contaminated sediments was 1500 ng/g while in the beach sand, the levels were 13.6 ng/g dry weight. Only the low chlorinated PCB congeners were efficiently transferred from the sediments to the plaice liver. Together, these results suggest that the effect of chemical exposure on the phagocytosis of plaice macrophages may be reversible if the fish are returned to a non-contaminated habitat.     

Incorporating bioavailability into management limits for copper in sediments contaminated by antifouling paint used in aquaculture

Although now well embedded within many risk-based sediment quality guideline (SQG) frameworks, contaminant bioavailability is still often overlooked in assessment and management of contaminated sediments. To optimise management limits for metal contaminated sediments, we assess the appropriateness of a range methods for modifying SQGs based on bioavailability considerations. The impairment of reproduction of the amphipod, Melita plumulosa, and harpacticoid copepod, Nitocra spinipes, was assessed for sediments contaminated with copper from antifouling paint, located below aquaculture cages. The measurement of dilute acid-extractable copper (AE-Cu) was found to provide the most useful means for monitoring the risks posed by sediment copper and setting management limits. Acid-volatile sulfide was found to be ineffective as a SQG-modifying factor as these organisms live mostly at the more oxidised sediment water interface. SQGs normalised to %-silt/organic carbon were effective, but the benefits gained were too small to justify this approach. The effectiveness of SQGs based on AE-Cu was attributed to a small portion of the total copper being present in potentially bioavailable forms (typically <10% of the total). Much of the non-bioavailable form of copper was likely present as paint flakes in the form of copper (I) oxide, the active ingredient of the antifoulant formulation. While the concentrations of paint-associated copper are very high in some sediments, as the transformation of this form of copper to AE-Cu appears slow, monitoring and management limits should assess the more bioavailable AE-Cu forms, and further efforts be made to limit the release of paint particles into the environment.     

多氯联苯污染沉积物质量评价研究进展

介绍了多氯联苯污染沉积物质量评价的研究进展 ,其中 ,简单介绍了多氯联苯的有关概况及环境行为、沉积物质量评价方法及基准研究进展 ;最后 ,重点介绍了包括多氯联苯在内的憎水性有机物污染沉积物质量评价的研究现状及存在问题。     

Spatio-temporal distribution of organic and inorganic pollutants from Lake Geneva (Switzerland) reveals strong interacting effects of sewage treatment plant and eutrophication on microbial abundance

Variation with depth and time of organic matter (carbon, nitrogen, phosphorus), inorganic pollutant (mercury), as well as bacterial abundance and activity, were investigated for the first time in sediment profiles of different parts of Lake Geneva (Switzerland) over the last decades. The highest organic contents (about 32%), mercury concentration (27 mg kg⁻¹), bacterial abundance (in order of 9 × 10⁹ cell g⁻¹ dry sediment), and bacterial activity (1299 Relative Light Units (RLU)) were found in the highly polluted sediments contaminated by the waste water treatment plant (WWTP) discharge, which deposited during the period of cultural eutrophication. Such data, which contrast with the other sampled sites from deeper and more remote parts of the lake, prove that the organic matter and nutrients released from the municipal WWTP have considerable effects on bacterial abundance and activities in freshwater sediments. In fact, the relatively unpolluted deepwater sites and the coastal polluted site show large synchronous increases in bacterial densities linked to the anoxic conditions in the 1970s (lake eutrophication caused by external nutrient input) that subsequently increased the nutrient loading fluxes. These results show that the microbial activities response to natural or human-induced changing limnological conditions (e.g., nutrient supply, oxygen availability, redox conditions) constitutes a threat to the security of water resources, which in turn poses concerns for the world’s freshwater resources in the context of global warming and the degradation of water quality (oxygen depletion in the bottom water due to reduced deep waters mixing). Moreover, the accumulation of inorganic pollutants such as high mercury (methyl-mercury) concentration may represent a significant source of toxicity for sediment dwelling organisms.