Green pre-concentration techniques during pesticide analysis in food samples

The ever-increasing demand for determining pesticides at low concentration levels in different food matrices requires a preliminary step of pre-concentration which is considered a crucial stage. Recently, the parameter of “greenness” during sample pre-concentration of pesticides in food matrices is as important as selectivity in order to avoid using harmful organic solvents during sample preparation. Developing new green pre-concentration techniques is one of the key subjects. Thus, to reduce the impact on the environment during trace analysis of pesticides in food matrices, new developments in pre-concentration have gone in three separate directions: the search for more environmentally friendly solvents, miniaturization and development of solvent-free pre-concentration techniques. Eco-friendly solvents such as supercritical fluids, ionic liquids and natural deep eutectic solvents have been developed for use as extraction solvents during pre-concentration of pesticides in food matrices. Also, miniaturized pre-concentration techniques such as QuEChERS, dispersive liquid–liquid micro-extraction and hollow-fiber liquid-phase micro-extraction have been used during trace analysis of pesticides in food samples as well as solvent-free techniques such as solid-phase micro-extraction and stir bar sorptive extraction. All these developments which are aimed at ensuring that pesticide pre-concentration in different food matrices is green are critically reviewed in this paper.     

Simultaneous determination of organochlorine and pyrethriod pesticide residues in the Chinese patent medicines by gas chromatography-tandem mass spectrometry

A simple, sensitive, reliable method was developed for the simultaneous determination of organochlorine and pyrethriod pesticide residues in Chinese patent medicines Six ingredient rehmannia pills and Xiaoyao pills. These pesticides were extracted by ethyl acetate. The extraction time and volume of ethyl acetate were optimized. Cleanup of extracts was performed with dispersive-solid phase extraction using graphitized carbon black as the sorbent. The determination of pesticides in the final extracts was carried out by gas chromatography–tandem mass spectrometry in multiple reaction monitoring mode (GC-MS/MS, MRM). The linearity of the calibration curves is good in matrix-matched standard and yields the coefficients of determination (R²) ≥0.99 for all of the target analytes. Under optimized conditions, the average recoveries (five replicates) for most pesticides range from 75.5% to 114.6%, and RSDs are less than 10.0%. The LODs of 18 pesticides in Six ingredient rehmannia pill and Xiaoyao pills are in the range of 0.01–8.82 μg kg^?1. The developed method meets the requirements of pesticide residue analysis and could be effectively used for routine analysis of the organochlorine and pyrethriod pesticide residues in Six ingredient rehmannia pills and Xiaoyao pills.     

Influence of suspended clay minerals and humic matter on the solid phase extraction efficiency of selected pesticides from water

The purpose of this investigation was to determine the influence of humic acids (HA) and Ca-montmorillonite (CaM) on the solid-phase extraction (SPE) efficiency of atrazine, alachlor and alpha-cypermethrin from water samples at various pH-values. The nature and intensity of binding of the studied pesticides to CaM were determined by X-ray diffraction analysis and termogravimetric analysis (TGA) test. The studied pesticides eluted from discs were analysed by thin-layer chromatography (TLC). The effects of CaM and humic acid were generally pH-dependent and acted independently in extraction efficiency influence. Lower recovery of pesticides was observed at higher pH values when CaM was > or =0.1 g and was attributed to greater dispersion of clay, increased surface area and subsequent adsorption. Concentrations of dissolved organic carbon (DOC) in humic acid had less effect on the extraction efficiency when water was at pH 8 compared to water at pH 2, which was probably due to greater nonpolar interactions of the pesticides to the charge-neutralized humic acid molecule.     

Influence of Suspended Clay Minerals and Humic Matter on the Solid Phase Extraction Efficiency of Selected Pesticides from Water

The purpose of this investigation was to determine the influence of humic acids (HA) and Ca-montmorillonite (CaM) on the solid-phase extraction (SPE) efficiency of atrazine, alachlor and α-cypermethrin from water samples at various pH-values. The nature and intensity of binding of the studied pesticides to CaM were determined by X-ray diffraction analysis and termogravimetric analysis (TGA) test. The studied pesticides eluted from discs were analysed by thin-layer chromatography (TLC). The effects of CaM and humic acid were generally pH-dependent and acted independently in extraction efficiency influence. Lower recovery of pesticides was observed at higher pH values when CaM was ≥0.1 g and was attributed to greater dispersion of clay, increased surface area and subsequent adsorption. Concentrations of dissolved organic carbon (DOC) in humic acid had less effect on the extraction efficiency when water was at pH 8 compared to water at pH 2, which was probably due to greater nonpolar interactions of the pesticides to the charge-neutralized humic acid molecule.     

Evaluation of a multiresidue method for pesticides in cereals using supercritical fluid extraction and gas chromatographic detection

Supercritical fluid extraction (SFE) was evaluated to be applied for residue analysis of 22 gas chromatography/electron capture detector-nitrogen phosphorus detector (GC/ECD-NPD) amenable pesticides in rice, wild rice and wheat. Samples were extracted with supercritical carbon dioxide at 200 atm pressure and 50°C temperature, using methanol as a static modifier. Mean recoveries obtained with the proposed SFE method at two spiking levels with four replicates per level are compared with those obtained with an ethyl acetate-based solvent extraction/gel permeation chromatography (GPC) clean up method. Both methods gave consistent high recoveries for almost all the pesticides from all the commodities with overall mean recoveries higher than 70% with relative standard deviations lower than 20%. Remarkable exceptions were captafol and dimethoate, for which low and/or non-reproducible recoveries were obtained with the SFE method. Residue levels determined with both methods in nine different incurred samples of wheat, containing some of the studied pesticides, were very similar, but, in all cases, slightly higher levels were determined with the SFE method.     

Application of automated mass spectrometry deconvolution and identification software for pesticide analysis in surface waters

A new approach to surface water analysis has been investigated in order to enhance the detection of different organic contaminants in Nathan Creek, British Columbia. Water samples from Nathan Creek were prepared by liquid/liquid extraction using dichloromethane (DCM) as an extraction solvent and analyzed by gas chromatography mass spectrometry method in scan mode (GC-MS scan). To increase sensitivity for pesticides detection, acquired scan data were further analyzed by Automated Mass Spectrometry Deconvolution and Identification Software (AMDIS) incorporated into the Agilent Deconvolution Reporting Software (DRS), which also includes mass spectral libraries for 567 pesticides. Extracts were reanalyzed by gas chromatography mass spectrometry single ion monitoring (GC-MS-SIM) to confirm and quantitate detected pesticides. Pesticides: atrazine, dimethoate, diazinone, metalaxyl, myclobutanil, napropamide, oxadiazon, propazine and simazine were detected at three sampling sites on the mainstream of the Nathan Creek. Results of the study are further discussed in terms of detectivity and identification level for each pesticide found. The proposed approach of monitoring pesticides in surface waters enables their detection and identification at trace levels.     

Desorption of polycyclic aromatic hydrocarbons from carbon nanomaterials in water

Desorption behavior of pyrene, phenanthrene and naphthalene from fullerene, single-walled carbon nanotubes (SWCNTs) and multi-walled carbon nanotubes (MWCNTs) was examined. Available adsorption space of carbon nanotubes (CNTs) was found to be the cylindrical external surface, neither the inner cavities nor inter-wall spaces due to impurities in the CNTs and restricted spaces (0.335nm) of the MWCNTs, respectively. Desorption hysteresis was observed for fullerene but not for CNTs. Deformation-rearrangement was proposed to explain the hysteresis of polycyclic aromatic hydrocarbons (PAHs) for fullerene, due to the formation of closed interstitial spaces in spherical fullerene aggregates. However, long, cylindrical carbon nanotubes could not form such closed interstitial spaces in their aggregates due to their length, thus showing no significant hysteresis. High adsorption capacity and reversible adsorption of PAHs on CNTs imply the potential release of PAHs if PAH-adsorbed CNTs are inhaled by animals and humans, leading to a high environmental and public health risk.     

Application of Automated Mass Spectrometry Deconvolution and Identification Software for Pesticide Analysis in Surface Waters

A new approach to surface water analysis has been investigated in order to enhance the detection of different organic contaminants in Nathan Creek, British Columbia. Water samples from Nathan Creek were prepared by liquid/liquid extraction using dichloromethane (DCM) as an extraction solvent and analyzed by gas chromatography mass spectrometry method in scan mode (GC-MS scan). To increase sensitivity for pesticides detection, acquired scan data were further analyzed by Automated Mass Spectrometry Deconvolution and Identification Software (AMDIS) incorporated into the Agilent Deconvolution Reporting Software (DRS), which also includes mass spectral libraries for 567 pesticides. Extracts were reanalyzed by gas chromatography mass spectrometry single ion monitoring (GC-MS-SIM) to confirm and quantitate detected pesticides. Pesticides: atrazine, dimethoate, diazinone, metalaxyl, myclobutanil, napropamide, oxadiazon, propazine and simazine were detected at three sampling sites on the mainstream of the Nathan Creek. Results of the study are further discussed in terms of detectivity and identification level for each pesticide found. The proposed approach of monitoring pesticides in surface waters enables their detection and identification at trace levels.     

Evaluation of pressurized liquid extraction for determination of organophosphorus and pyrethroid pesticides in soybean

The purpose of this study was to develop an analytical method for the determination of organophosphorus and pyrethroid pesticides in soybean by pressurized liquid extraction (PLE). Two organic solvents, acetone and acetonitrile, were evaluated as extraction solvents. In both cases, the amount of extract was enhanced with increasing extraction temperature. The extracts obtained using acetonitrile were measured by gas chromatography/mass spectrometry after a cleanup process based on the analytical method for the Japanese Positive List System for Agricultural Chemicals Remaining in Foods. The effect of extraction temperature (range: 40– 130°C) on extraction efficiency was evaluated by a recovery study using 21 organophosphorus pesticides and 10 pyrethroid pesticides as target analytes and acetonitrile as the solvent. The results indicated that at 130°C, some organophosphorus pesticides might be degraded, whereas extraction temperatures between 70°C and 100°C were optimal. Next, a prepared sample containing fenitrothion and permethrin was analyzed. Although the sample was not soaked in water prior to analysis, PLE provided analytical results comparable to those obtained by solvent extraction with homogenization. Therefore, PLE is considered a simple and alternative technique for the extraction of organophosphorus and pyrethroid pesticides in soybean.     

Simultaneous determination of organophosphorus and organonitrogen pesticides residues in Angelica sinensis

Gas chromatography with nitrogen phosphorus detector (GC-NPD) was applied to the simultaneous determination of 15 organophosphorus and 6 organonitrogen pesticides residues in Angelica sinensis. The pesticides were extracted by microwave-assisted extraction (MAE) and ultrasound-assisted extraction (UAE) techniques, respectively. The experimental variables were optimized through orthogonal array experimental design. Cleanup of extracts was performed with column chromatography using florisil and neutral aluminum as the sorbents. The determination of pesticides in the final extracts was carried out by GC-NPD. Under optimized conditions, the average recoveries obtained from MAE and UAE are in the range of 75.1–129% and 70.6–129%, respectively, and the relative standard deviations of MAE and UAE were 3.1–10.6% and 1.0–17.8%, respectively.     

Evaluation of pressurized liquid extraction for determination of organophosphorus and pyrethroid pesticides in soybean

The purpose of this study was to develop an analytical method for the determination of organophosphorus and pyrethroid pesticides in soybean by pressurized liquid extraction (PLE). Two organic solvents, acetone and acetonitrile, were evaluated as extraction solvents. In both cases, the amount of extract was enhanced with increasing extraction temperature. The extracts obtained using acetonitrile were measured by gas chromatography/mass spectrometry after a cleanup process based on the analytical method for the Japanese Positive List System for Agricultural Chemicals Remaining in Foods. The effect of extraction temperature (range: 40- 130°C) on extraction efficiency was evaluated by a recovery study using 21 organophosphorus pesticides and 10 pyrethroid pesticides as target analytes and acetonitrile as the solvent. The results indicated that at 130°C, some organophosphorus pesticides might be degraded, whereas extraction temperatures between 70°C and 100°C were optimal. Next, a prepared sample containing fenitrothion and permethrin was analyzed. Although the sample was not soaked in water prior to analysis, PLE provided analytical results comparable to those obtained by solvent extraction with homogenization. Therefore, PLE is considered a simple and alternative technique for the extraction of organophosphorus and pyrethroid pesticides in soybean.     

Review of advances in the thin layer chromatography of pesticides: 2012–2014

Publications reporting techniques and applications of thin layer chromatography (planar chromatography) for the separation, detection, qualitative, and quantitative determination, and preparative isolation of pesticides and their metabolites are reviewed for the period from November 1, 2012 to November 1, 2014. Analyses are described for a variety of sample types and pesticide classes. In addition to references on residue analysis, studies such as pesticide structure – retention relationships, identification and characterization of natural and synthesized pesticides, metabolism, bioactivity, degradation, soil mobility, and lipophilicity are covered.     

Relationships between pesticides and organic carbon fractions in sediments of the Danshui River estuary and adjacent coastal areas of Taiwan

In order to understand the fate of pesticides in marine environments, concentrations of pesticides and different carbonaceous fractions were determined for surface sediments in the Danshui River and nearby coastal areas of Taiwan. The major compounds detected were tetrachlorobenzene, HCHs, chlordane, aldrin, DDDs, DDEs and DDTs. Total concentrations of pesticides in the sediments ranged from not detectable to 23 ng g(-1), with the maximum value detected near the discharge point of the marine outfall from the Pali sewage treatment plant. These results confirm that pesticides persist in estuarine and nearby coastal environments of the Danshui River well after their ban. Concentrations of total pesticides significantly correlate with concentrations of total organic carbon and black carbon in these sediments, suggesting that total organic carbon and black carbon regulate the distribution of trace organic pollutants in fluvial and coastal marine sediments.     

Screening of compost for PAHs and pesticides using static subcritical water extraction.

Static subcritical water extraction (SubWE) along with solid phase extraction (SPE) was used for the analysis of PAHs and pesticides in municipal solid waste compost. Yields obtained for PAHs in certified reference sediment (CRM 104) were acceptable. The extraction method was simple, rapid, used small sample sizes, and no sample drying was required. Analysis of samples was performed by GC/MS and HPLC. Recovery of spiked pesticides was greatest at 110 degrees C for 20 min extraction time. The optimum extraction for PAH analysis was achieved at 150 degrees C for 20 min. Addition of C-18 resin as an "alternate sorbent" upon cooling increased recovery of PAHs but not of pesticides, however, it increased the stability of atrazine and propazine at higher temperatures. Analysis of three municipal compost samples from the Dayton, OH (USA) area showed no pesticides above the detection limit, however, PAH totals for 11 PAHs were 15.97, 14.42, and 20.79 microg g(-1). The totals of six of the seven carcinogenic PAHs, for which remediation goals in the United States is 4.6 microg g(-1), were determined to be 9.89, 6.77, and 13.06 microg g(-1) dry weight. The highest PAH totals were obtained from compost containing sewage sludge.     

Multiresidue determination of pesticides in tea by gas chromatography-tandem mass spectrometry

An efficient and reliable GC-MS/MS method for the multiresidue determination of pesticides in tea was developed by modifying the Japanese official multiresidue method. Sample preparation was carefully optimized for the efficient removal of coextracted matrix components. The optimal sample preparation procedure involved swelling of the sample in water; extraction with acetonitrile; removal of water by salting-out; and sequential cleanup by ODS, graphitized carbon black/primary secondary amine (GCB/PSA) and silica gel cartridges prior to GC-MS/MS analysis. The recoveries of 162 pesticides from fortified (at 0.01 mg kg^?1) green tea, oolong tea, black tea and matcha (powdered green tea) were mostly (95–98% of the tested pesticides) within the range of 70–120%, with relative standard deviations of <20%. Poor recovery of triazole pesticides was considered to be due to low recovery from the silica gel cartridges. The test solutions obtained by the modified method contained relatively small amounts of pigments, caffeine and other matrix components and were cleaner than those obtained by the original Japanese official multiresidue method. No interfering peaks were observed in the blank chromatograms, indicating the high selectivity of the modified method. The overall results suggest that the developed method is suitable for the quantitative analysis of GC-amenable pesticide residues in tea.     

Pesticides removal in the process of drinking water production

The aim of this research work was to study the effectiveness of the treatments commonly used in drinking water plants in Spain to degrade 44 pesticides systematically detected in the Ebro River Basin. The pesticides studied are: alachlor, aldrin, ametryn, atrazine, chlorfenvinfos, chlorpyrifos, pp'-DDD, op'-DDE, op'-DDT, pp'-DDT, desethylatrazine, 3,4-dichloroaniline, 4,4'-dichlorobenzophenone, dicofol, dieldrin, dimethoate, diuron, alpha-endosulphan, endosulphan-sulphate, endrin, alpha-HCH, beta-HCH, gamma-HCH, delta-HCH, heptachlor, heptachlor epoxide A, heptachlor epoxide B, hexachlorobenzene, isodrin, 4-isopropylaniline, isoproturon, metholachlor, methoxychlor, molinate, parathion methyl, parathion ethyl, prometon, prometryn, propazine, simazine, terbuthylazine, terbutryn, tetradifon and trifluralin. The techniques applied are: preoxidation by chlorine or ozone, chemical precipitation with aluminium sulphate and activated carbon adsorption. Oxidation by chlorine removes 60% of the studied pesticides, although combining this technique with a coagulation-flocculation-decantation process is more effective. The disadvantage of this treatment is the formation of trihalomethanes. Oxidation by ozone removes 70% of the studied pesticides. Although combination with a subsequent coagulation-flocculation-decantation process does not improve the efficiency of the process, combination with an activated-carbon absorption process gives rise to 90% removal of the studied pesticides. This technique was found to be the most efficient among the techniques studied for degrading the majority of the studied pesticides.     

Comparative study of accessibility of distinctive pesticides

Interactions of micro-contaminants with soil may play a crucial role in their environmental fate and possible harmful effects. Major goals of our investigations were to model the availability of widely used pesticides and characterize adsorption capabilities of distinctive soil types by the accomplishment of extensive comparative studies and application of several extraction methods. Environmental and biological relevance of these examinations is enhanced by the fact that intrinsic features and specific details of pesticide accessibility have not been revealed so far by a comparative approach. Five different experimental methods were assessed for modelling accessibility of five selected pesticides. The applied models for regaining the pesticides showed diverse efficiency in extraction capability in cases of the different soil types (sandy, brown forest and alluvial soils). The amounts of the obtained pesticides were determined by using gas-chromatography coupled to mass spectrometry (GC-MS) and high pressure liquid chromatography coupled to mass spectrometry (HPLC-MS). Accessibility of pesticides was also compared in cases of sterilized and real soil samples in order to estimate the extent of the influence of microflora. Aqueous extraction solvents proved to be suitable for accurate assessment of the accessible amounts of pesticides, as their effectivity was at least as high as that of the applied organic solvents. In our studies pesticide-soil interactions have comprehensively been characterized, and possible influences of environmental factors on the accessibility have also been revealed. Our study might be regarded as a tentative approach to model some significant circumstances playing key roles in pesticides' possible bioavailability.     

Organochlorine pesticides in the surface waters of Northern Greece

A survey undertaken in Northern Greece has shown that organochlorine pesticides are present in the surface waters. Surface water samples have been collected seasonally from four rivers and five lakes for a period of two years. Solid-phase extraction followed by gas chromatographic techniques with electron capture detection was used for the determination of the compounds. The most commonly encountered organochlorine pesticides in surface waters were the isomers of hexachlorocyclohexane, aldrin, dieldrin and endosulfan sulfate. In some cases the concentrations detected were higher than the qualitative target levels set by the European Union, especially for hexachlorocyclohexane and aldrin. The occurrence of these compounds in Greek surface waters can be attributed to intense agricultural activity as well as to transboundary pollution.     

Determination of organochlorine and organophosphorus pesticide residues in low moisture, nonfatty products using a solid phase extraction cleanup and gas chromatography

A multiresidue solid-phase extraction (SPE) method for the isolation and subsequent gas chromatographic determination of organochlorine and organophosphorus pesticide residues in low-moisture, nonfatty products is described. Residues are extracted from samples with an acetonitrile/water mixture. Cleanup of the extract is performed using graphitized carbon black and anion exchange SPE columns, and analysis is performed by gas chromatography with Hall electrolytic conductivity and flame photometric detection. Recovery data was obtained by fortifying corn, oats and wheat with pesticides. The average recoveries were 79-123% for eight organochlorine and 51-122% for 28 organophosphorus pesticide residues. The limit of quantitation for chlorpyriphos was 0.05 ppm using the Hall electrolytic conductivity detector and < 0.005 ppm using the flame photometric detector.     

Assessing supercritical fluid extraction for the analysis of fipronil, kresoxim-methyl, acrinathrin, and pyridaben residues in melon

An analytical method, using supercritical fluid extraction (SFE), was assessed for residue analysis of the insecticides fipronil, acrinathrin and pyridaben and the fungicide kresoxim-methyl in melons. Extraction conditions were optimized on glass beads, as inert material, evaluating different pressures, temperatures, and CO(2) volumes. Also, the extractability of pesticides from hydromatrix and anhydrous magnesium sulfate was evaluated. Both adsorbents were evaluated for the preparation of SFE-spiked melon samples. Extractions of fortified samples were done using 20 mL of CO(2), 300 atm, and 50 degrees C. Different extraction conditions, including the addition of water and methanol as a static modifier, were used to assess the extractability of these pesticides, and the addition of methanol was demonstrated to improve the extraction of all the studied pesticides.