Isolation,identification and desulfurization mechanism of a sulfur-oxidizing bacterium with salt tolerance北大核心CSCD

Micro-organism with efficient desulfurization performance is a key factor in the biological desulfurization technology. This study aimed to seek such a sulfur-oxidizing strain and understand its desulfurization mechanism. Wastewater in a sewage station of natural gas purification plant was used to screen the sulfide-oxidizing strain, and to identify it based on sequence similarity analysis of 16S rDNA and the morphological characteristics. Thiosulfate was used as substrate for investigating the sulfur oxidation performance and salinity tolerance; the OD600, content change of thiosulfate, sulfate, sulfur, pH and total alkalinity in the cultural system were also investigated. The strain DS-B was found to share the highest sequence similarity with Thioalkalivibrio thiocyanoxidans ARh2, therefore determined as Thioalkalivibrio. At the optimum temperature of 35 °C for growth and degradation, the removal efficiency of thiosulfate could reach 98.7% after 7 days. Strain DS-B had strong resistance to thiosulfate, and the optimal concentration of S2O32- was 2 × 104 mg/L. The analysis for sulfur oxides showed that it could oxidize thiosulfate by the pathway of S2O32-→SO42- / S2O32- → S → SO42-. Therefore the strain DS-B is a sulfur-oxidizing bacterium with great application prospect for its strong salt tolerance and conspicuous removal capability for thiosulfate.     

Characterization and catabolic genes detection of three oil-degrading Rhodococcus spp.北大核心CSCD

Oil pollution is one of the major factors causing environmental deterioration. Bioremediation of oil contaminated environments by microorganisms attracts much research attention. This study aimed to screen efficient oil-degrading bacteria from oil contaminated soil and analyze their characteristics and catabolic genes. Oil-degrading bacteria were screened from oil contaminated soil in minimal medium containing crude oil and identified by morphological, physiological and biochemical characteristics and 16S rDNA sequence analysis. Their growth and degradation characteristics were studied with ultraviolet spectroscopy and GC-MS analysis. The surfactant production was studied by adopting culture method. The major oil-degrading related genes were detected by t he PCR a mplification. As a result, t hree oil-degrading bacteria strains named KB1, 2182 and JC3-47 were isolated from the oil contaminated soil samples. The strains could use crude oil as the sole carbon source to degrade oil with a degrading rate of 41.02%, 32.26% and 55.90%, respectively, when cultured in minimal medium containing crude oil for 3 days. The bacteria were identified to belong to genus Rhodococcus. With 100% similarity of 16S rDNA sequences of the three strains with known ones of Rhodococcus, KB1 was preliminarily identified as Rhodococcus erythropolis, 2182 as Rhodococcus equi, and JC3-47 as Rhodococcus qingshengii. They grew well at 10-50 °C, with the initial pH of 3-9 and the NaCl concentration of 0-5%. The optimal temperature for bacterial growth was 35 °C, 35 °C and 30 °C respectively. KB1 and 2182 could grow at pH 2 and 9.0% of NaCl. The bacteria grew well in broth containing different organic substrates as sole carbon source, such as n-dodecane, n-octadecane, benzene, methylbenzene, xylene and naphthaline. KB1 and JC3-47 could grow well in broth containing pyrene. GC-MS analysis revealed that the bacteria could effectively degrade medium- and long-chain alkane components in crude oil. The bacteria produced biosurfactants and decreased the surface tension of the culture broth. They also showed adhesion activities to n-hexadecane. The oil-degrading related genes such as alkane monooxygenase, aromatic-ring-hydroxylating dioxygenase and catechol dioxygenase genes were detected in all the three strains. Besides, biphenyl dioxygenase genes were detected in KB1 and 2182. The isolated Rhodococcus spp. strains could effectively degrade petroleum hydrocarbons with high adaptabilities to extreme environments such as high salt and low temperature. They are supposed to be applied broadly in the bioremediation of oil contaminated soil in such environments.     

Isolation,identification, and the biodegradation characteristics of a benzoylurea insecticides-degrading strain北大核心CSCD

A chlorbenzuron, diflubenzuron, and hexaflumuron-degrading bacterium strain M6, was isolated from the activated sludge of an insecticide factory. The strain was identified as Achromobacter sp. according to an analysis on the 16S rRNA gene sequences, morphological, and physiological characteristics. Strain M6 could degrade more than 91% of 100 mg/L chlorbenzuron, diflubenzuron, and hexaflumuron within 48 hours, which could act as the sole carbon source. Strain M6 showed more chlorbenzuron degradation at a temperature range between 25 and 40 ℃ and a pH range between 6.0 and 8.0. The optimal temperature and the initial pH of medium for chlorbenzuron degradation by strain M6 were 30 ℃ and 7.0, respectively; the maximum chlorbenzuron tolerated concentration of strain M6 was as high as 400 mg/L. Strain M6 hydrolyzed 4-acetaminophenol into a purple-red product. Moreover, an approximately 1.4 kb DNA fragment, which could be expressed into an amidase to degrade amide pesticides, was amplified from the genomic DNA of strain M6. The results preliminarily proved that 3 benzoylurea insecticides could be degraded because of strain M6 hydrolyzing their amide bonds. This study obtained a highly efficient degrading strain and provided new resources and valuable information on benzoylurea insecticide degradation. © 2018 Science Press. All rights reserved.     

Screening and degradation characteristics of a tetracycline-degrading bacterial strain北大核心CSCD

Tetracycline is widely used in livestock and poultry breeding industry, which can cause serious problems to the environment. Antibiotic pollution has become an important environmental issue. This study aimed to isolate and identify a well-functioning tetracycline-degrading bacteria strain from activated sludge and to investigate its optimum degradation conditions. The strain was identified through morphological features, Gram staining, and the sequence analysis of 16S rRNA. Furthermore, the temperature, initial pH of the medium, inoculation amount, and type of metallic salt were analyzed to investigate the tetracycline degradation performance of the isolated strain. Based on the single factor test, the method of response surface analysis was adopted to optimize the degradation condition. The strain was named TTC-1 and identified as Klebsiella pneumoniae. The optimum condition for tetracycline degradation was determined as follows: temperature of 34.4 °C, pH of 7.22, and MnSO4 concentration of 0.32 g/L. Under this optimum condition, the predicted tetracycline degradation rate was 93.77%, whereas the observed value was 94.26%. The experimental results showed that the proposed model had high accuracy. TTC-1 showed a good performance in degrading tetracycline, which can provide reference for the bacteria during the biological treatment of tetracycline containing wastewater. © 2018 Science Press. All rights reserved.     

Cloning and expression analysis of geosmin synthase gene from Aphanizomenon gracile北大核心CSCD

Geosmin is a secondary metabolite responsible for earthy odors. The occurrence of geosmin has great impact on the quality of water environment. The gene essential for geosmin biosynthesis have been identified in several species. But little is known about the mechanism of geosmin synthesis in Aphanizomenon gracile. This study attempted to clone the gene involved in geosmin biosynthesis of Aphanizomenon gracile a nd a nalyze t he geosmin production u nder d ifferent e nvironments. T he high-efficiency thermal asymmetric interlaced PCR (hiTAIL-PCR) was used to amplify the full-length of geosmin synthase gene from Aphanizomenon gracile (WH-1). Real time PCR (RT-PCR) was applied to quantify the geosmin production in different light and temperature. As a result, geo, a geosmin synthase gene from Aphanizomenon gracile (WH-1) was cloned by hiTAIL-PCR. The full-length open reading frame (ORF) of geo was 2 262 bp, coding for a protein of 753 amino acids. Meanwhile, WH-1 was treated with different environment conditions and mRNA expression levels of geo were quantified by RT-PCR. It was found that low temperature (15 °C), high light intensity (35 μmol m-2 s-1) and continuous light illumination were beneficial to the expression of geo. The successful amplification of geosmin synthase gene verified that hiTAIL-PCR is an effective and simple procedure of low cost. The result provides fundamental knowledge on the monitoring and prevention for odorants.     

Isolation,identification, culture conditions,and laccase production of white rot fungus北大核心CSCD

The white rot fungi are members of Basidiomycota, which can degrade lignin and form white rot. They are high producers of extracellular laccases. In the present study, pure culture strain of high-temperature and high-laccase production types (numbered as BUA-01) was isolated from the fruiting bodies of a white rot fungus collected in the campus of Beijing University of Agriculture. The taxonomic characteristic was determined based on morphological and ITS sequence analysis. Furthermore, the optimal culture conditions for the mycelia were determined, including carbon source, nitrogen source, C/N ratio, growth factors, temperature, and pH. Extracellular laccase production was investigated in liquid fermentation with different concentrations of Cu (CuSO4) as inducer. Decolorizing activity of the fermentation broth was assayed using three azo dyes: Evans blue, methyl orange, and eriochrome black T. The results showed that the strain possessed the highest homology toward Trametes hirsuta, with the homology ratio of 100% and the genetic distance of 0, suggesting that the strain BUA-01 belonged to the genus Trametes. The culture condition investigated revealed that the optimal condition for mycelia growth included the following: carbon source, starch; nitrogen source, soybean powder and yeast extract; C/N ratio, 40/1 and 10/1; temperature, 37 °C; and pH, 6.0-7.0. The assayed growth factors had no significant effect on mycelial growth. It demonstrated high laccase activity in liquid fermentation. The highest extracellular laccase activity of 1 081.33 ± 6.3 U/mL was observed in the broth with a Cu adjunction concentration of 0.25 mmol/L after a 96-h culture period. It was about 26-fold higher than that of the control group. The isolated strain exhibited significant decolorizing activity toward the azo dyes Evans blue, methyl orange, and eriochrome black T, with the decolorization rate at 12 h of 93.31% ± 0.16%, 92.37% ± 0.42%, 79.25% ± 0.64%, respectively. This suggests that the strain possesses potential applications in laccase production and dye degradation. © 2018 Science Press. All rights reserved.     

Isolation,identification, culture conditions,and laccase production of a wild mushroom 'Huaier'北大核心CSCD

In the present study, fruiting bodies of a wild medicinal mushroom, 'Huaier, ' were collected from Populus canadensis in the Beijing Xiangshan Park. The pure culture strain was obtained from fruiting bodies using the tissue isolation method. It was stored and numbered as XS-01. It was systematically classified using morphological and ITS identification. Further studies were focused on mycelia optimum culture conditions and laccase production by liquid fermentation. A 598-bp partial ITS region sequence (GenBank accession number KY93348) was obtained using PCR method. Phylogenetic tree and genetic distance analysis were performed using the MEGA 6.0 software. The present strain possessed the highest homology (100%) with Perenniporia robiniophila, and the genetic distances were 0.000. Based on the ITS sequencing and morphological characteristics of fruiting bodies and mycelia, XS-01 was identified as P. robiniophila. Based on mycelial growth rate and quality, mycelia optimum culture conditions were revealed to be as follows: the optimum carbon sources were starch and maltose, the optimum nitrogen source was yeast extracts, the optimum C/N ratio range was 30/1 - 60/1, the best growth temperature was 32 °C, the optimum pH was 7, and the optimum growth factor was VB1. Further study of Cu2+ on extracellular laccase production revealed that 1.0 mmol/L Cu2+ could significantly enhance the enzyme production, with the highest activity of 417.5 U/mL when cultured for 96 h and an increase ratio of 93.4% to the control. On the other hand, 2.0 mmol/L Cu2+ can markedly decrease the enzyme production laccase activity at 96 h to 79.0 U/mL, which was 36.6% of that of the control. In conclusion, a pure strain of T. robiniophila with high extracellular laccase activity was obtained, suggesting its potential application for artificial cultivation and laccase production. © 2018 Science Press. All rights reserved.     

Screening and characterization of extremophiles in spacecraft assembly environment北大核心CSCD

Spacecrafts need to strictly control microorganisms before entering space flight. The Spacecraft Assembly, Integration, and Test Center (AITC) is an important environmental source for spacecrafts to carry microorganisms. The assembly clean room has characteristics of ventilation, dryness, and lack of nutrients that are not conducive to the growth and reproduction of microorganisms, except for extremophiles. In this study, based on the internal air and surface environment of the AITC in China, 13 strains of bacteria were identified by plate culture and 16S sequence analysis, and their extreme environmental tolerance, antibiotic resistance, and film-forming ability were tested. All these bacteria belonged to the Firmicutes and Proteobacteria phyla, and nine strains belonged to the Bacillus genus. All 13 strains of bacteria were salt-tolerant, acid-tolerant, and alkali-tolerant, and 69.2% of the bacteria survived heat shock at 80 ℃. Among these, one strain of Sphingomonas sp. JCM7513 isolated from the surface environment was insensitive to all the tested antibiotics and had strong drug resistance, while the other 12 strains were sensitive to most β-lactam antibiotics but had strong resistance to tetracyclic antibiotics and erythromycin. Most of the isolated bacteria exhibited strong biofilm-forming abilities. The study showed that there are a certain number of extremophiles in the spacecraft assembly environment. To protect spacecrafts from biological corrosion and planetary protection forward pollution, more effective monitoring and elimination methods are needed. © 2022 Science Press. All rights reserved.     

Screening and identification of cellulose degrading bacterium Bacillus siamensis BREC-11 with tolerance to furfural北大核心CSCD

Furfural is a toxic metabolic inhibitor that is created during the conversion of lignocellulose to produce fuel, which can retard fermentation and increase production costs. thus, it is important for lignocellulosic conversion that the ability of the strain to resist furfural stress be improved. A cellulose-degrading bacterium BREC-11 with tolerance to furfural was isolated from the intestinal tract of Omphisa fuscidentalis hampson larvae via the addition of furfural in the medium. Based on analyses of morphological observations, physiological and biochemical characterizations, and 16S rDNA sequences, strain BREC-11 was shown to represent a member of the genus Bacillus and was named B. siamensis BREC-11. to study the tolerance concentration of strain BREC-11, a wide range of furfural formaldehyde concentrations were tested and strain BREC-11 was shown to grow in the mineral medium containing furfural up to 3.5 g/L. Cellulase activity of strain BREC-11 was determined at the tolerable concentration of 3.5 g/L furfural after incubation at 30 ℃ and 150 r/min for 2 days. Results indicated that filter paper enzyme, CMC-Na enzyme, and β-glucosidase activity was 0.1 U/mL, 0.21 U/mL, and 0.07 U/mL, respectively. BREC-11 is a cellulose-degrading bacterium with resistance to furfural, which has potential application in future bio-refinery processes. © 2018 Science Press. All rights reserved.     

Mycelial culture of wild Inonotus hispidus parasitizing the jujube tree and the cultivation conditions of its fruit body on rice medium北大核心CSCD

Inonotus hispidus is a kind of rare medicinal fungus, and its natural resources are very scarce. Currently, the artificial cultivation technology of I. hispidus is not completely developed, and this reflects on its extremely low biological conversion rate and long cultivation period. In order to improve the bioconversion rate and shorten the production cycle of I. hispidus, we first analyzed the mycelia culture conditions of the collected I. hispidus, and then we further explore the method of domesticated cultivation of its fruiting body in rice medium. During the process of mycelial culture, the suitable temperature, pH, carbon source, and nitrogen source for mycelial growth were selected using the mycelial growth rate as index. During the domesticated cultivation of the fruiting body, the suitable culture medium for its growth was selected using the bioconversion rate as index. Screening results of mycelial culture conditions showed that the optimal culture conditions for the growth of mycelium of the wild I. hispidus were: temperature of 25 °C, initial pH of 6.0, glucose as the carbon source, and yeast extract powder as the source of nitrogen. The results of the domesticated cultivation showed that the biotransformation rate of I. hispidus was higher when using rice as the main medium substrate. The optimal cultivation conditions were: a 0.2% yeast extract content in the nutrient solution, a 1:1.6 ratio of rice to nutrient solution, and a 4 mL inoculum of the liquid strain. Under these conditions, it took about 4 days for the mycelium to grow over the cultivation medium. The time required for the differentiation of the primordium to form fruit bodies was about 20 days, and the bioconversion rate reached 28.70% ± 5.05%. The results of this study indicate the feasibility of using rice as the main substrate for the cultivation of I. hispidus, and it also provide new insights for the finding of new cultivation substrates for other rare medicinal fungi. © 2018 Science Press. All rights reserved.     

A new efficient azo dye-decolorizing bacterium Paenibacillus dendritiformis GGJ7 and its decolorization process北大核心CSCD

This paper aimed to find an efficient bacterium for decolorizing azo dyes. A strain which could decolorize Congo Red efficiently was isolated from Congo Red. The strain was identified as Paenibacillus dendritiformis GGJ7 (GGJ7, in short) by 16S rRNA gene sequence (NCBI accession No. KY655213). Strain GGJ7 was applied to the decolorization of azo dyes in this research, and influencing factors of decolorization were investigated, including diverse nutritional conditions, culture conditions (pH, temperature, oxygen conditions), and various dyes. The results demonstrated that the decolorization rate of Congo Red by strain GGJ7 was much higher than that of the other eight strains (e.g., YRJ1, YRJ2 etc.) in our previous work. The optimal conditions for Congo Red decolorization were 25 g/L LB broth as nutrient source, 30 °C, pH 7, and an anaerobic environment. The mechanism of decolorization was mainly biodegradation, and the decolorization process of strain GGJ7 was conformed to the first-class kinetics model: -ln (At /A0) = 0.6058t - 0.1082. For different azo dyes, the decolorization rate was up to 95%. Strain GGJ7 only needed 1 h to decolorize 50 mg/L Methyl Orange, 25 mg/L Croceine Scarlet, and 25 mg/L Methyl Red, needed 3 h to decolorize 50 mg/L Orange G and 50 mg/L Orange G6, and needed 4 h to decolorize 50 mg/L Congo Red. In summary, strain GGJ7 is an efficient azo dye-decolorizing bacterium, and it has a potential application in treating printing and dyeing wastewater. © 2018 Science Press. All rights reserved.     

Isolation,identification, and biological characteristics of a wild Chaga mushroom北大核心CSCD

In this study, a pure culture strain (numbered as F1501) was obtained using tissue separation and purification methods from the sclerotia of Chaga mushroom from Russia. Further researches included studies on classification, optimum growth conditions of mycelia, extracellular polysaccharides from fermentation broth and their antioxidant activity, and artificial acclimation. According to the identification of the internal transcribed spacer (ITS) region, it was confirmed that F1501 was a species of the genus Inonotus and family Hymenochaetaceae, which had 99% similarity with Inonotus obliquus. F1501 was further classified as I. obliquus based on the morphological characteristics of its mycelia and sclerotia. The optimal carbon source, nitrogen source, C/N ratio, growth factor, temperature, and pH value for the growth of the F1501 strain mycelia were maltose, beef extracts, 10/1, B2, 28 °C, and 8.0, respectively. Liquid fermentation of F1501 was performed using PD media and a 10% inoculation amount at 28 °C and 150 r/min for 7 d. The content of polysaccharides in the fermentation broth was 476.32 mg/L, with a total antioxidant activity of 0.19 mmol/L (Trolox) and hydroxyl free radical-scavenging activity of 72.7%. Artificial acclimation study revealed that the fruiting body-like structure was obtained using cottonseed hulls as the main substrate. In the present study, a new strain of I. obliquus and its biological characteristics were explored, which could provide a theoretical basis for the artificial acclimation and development of wild mushrooms. © 2018 Science Press. All rights reserved.     

Isolation,identification, and the degradation characteristics of a BDE-47 degrading strain北大核心CSCD

In an effort to remove BDE-47 residues from the environment, a bacterial strain that is capable of utilizing BDE-47 as the sole carbon source was isolated and screened from soil collected from an e-waste recycling area in Tianjin to analyze the degradation properties. The strain was preliminarily identified as Enterobacter sp. according to a 16S rDNA gene sequence analysis. The strain degraded 35.8% of 525 μg/L of BDE-47 in 35 d when the initial concentration of bacteria was 7.1 × 105 cells/ mL. The product of the biodegradation of BDE-47 was BDE-28. The biodegradation of BDE-47 fit well with first-order kinetics, and its degradation kinetics was ln Ct = - 0.104t + 6.22. With the addition of an electron acceptor, such as Fe3+, SO4 2- and NO3 -, the BDE-47 degradation rate was significantly increased to 49.8%, 59.1%, and 67.3%, respectively. The above results revealed that the strain could degrade BDE-47, which is of importance in the application of environmental bioremediation of BDE-47. © 2018 Science Press. All rights reserved.     

Enhancement of MK-7 synthesis by engineered strains of Bacillus subtilis natto that overexpress men genes and by increasing available dissolved oxygen北大核心CSCD

In recent years, researchers have discovered novel physiological functions of vitamin K2. In addition to promoting blood clotting, it can prevent osteoporosis and cardiovascular disease and is expected to treat some tumors and Parkinson’s disease. Bacillus subtilis natto is a probiotic that has been approved by the U.S. Food and Drug Administration for use as a bioproducer of vitamin K2. Its product’s main form is MK-7, which has a long half-life in the human body and high bioavailability. Bacillus subtilis natto displays great potential for large-scale biological preparation of vitamin K2. In this study, the Sipizizen method of Bacillus subtilis transformation was optimized to make it suitable for molecular transformation of Bacillus subtilis natto. Vectors for overexpression of all 8 genes involved in the menadione synthetic pathway were constructed, and changes in MK-7 fermentation yield after transformation of Bacillus subtilis natto were investigated. Three enzymes were found to exert significant effects on MK-7 synthesis, namely isopentenyltransferase (MenA), 1,4-dihydroxy-2-naphthoyl-CoA synthase (MenB), and nornaphthoquinone methyltransferase (MenG). A modified strain (BN-pABG) with higher MK-7 productivity was obtained by concerted overexpression of menA, menB, and menG. In a 5 L bioreactor, MK-7 synthesis was further enhanced by optimizing oxygen supply. The final yield of MK-7 from the modified strain was 62.21 mg/L, 1.26 times higher than that of the original strain. These results show that combined overexpression of menA, menB, and menG strongly promotes MK-7 synthesis by Bacillus subtilis natto, and optimizing the oxygen supply conditions also promotes more robust MK-7 synthesis. © 2022 Authors. All rights reserved.     

Variation in humic and fulvic acids during thermal sludge treatment assessed by size fractionation,elementary analysis,and spectroscopic methods

Thermal pretreatment can be applied to sludge anaerobic digestion or dewatering. To analyze the variation in humic substances during thermal sludge treatment, sludge humic and fulvic acids were extracted before and after 30-min thermal treatment at 180℃, and then their contents, molecular weight distributions, elementary compositions, and spectral characteristics were compared. The results showed that the total contents of humic and fulvic acids in the sludge almost remained constant during thermal treatment, but 35% ofhumic and fulvic acids were dissolved from the sludge solids. Moreover, both humic and fulvic acids were partly decomposed and 32% of humic acids were converted to fulvic acids. The median value of the molecular weights of humic acids decreased from 81 to 41 kDa and that of fulvic acids decreased from 15 to 2 kDa. Besides the reduction in molecular size, the chemical structures of humic and fulvic acids also exhibited a slight change, i.e. some oxygen functional groups disappeared and aromatic structures increased after thermal sludge treatment.     

Migration behavior and in-situ bioremediation of chlorinated hydrocarbon solvent in vadose zone: a review北大核心CSCD

It is of great significance for in-situ bioremediation to clarify the migration behavior and biodegradation laws of chlorinated hydrocarbon solvents (CHS) in the vadose zone. We systematically summarized the phase distribution of CHS, the interaction between different phases, and the migration characteristics and clarified the evolution rules of CHS under different phases in the polluted vadose zone. CHS exists in the vadose zone as the NAPL, dissolved phase, adsorbed phase, gas phase, and other phases, where there are three decay evolution stages: early, middle, and late stages. Phase change and diffusion matrix size are important indicators at different stages; at the same time, gas, solid, liquid and NAPL phase CHS have a variety of interactive relationships in the vadose zone. Subsequently, the characteristics of the three main biological metabolic pathways of CHS in the vadose zone–aerobic co-metabolism, direct oxidation and anaerobic reduction, and dechlorination–and their influencing factors were summarized. Generally speaking, the anaerobic dechlorination capacity decreases with a decrease in the number of chlorine atoms, whereas the aerobic degradation capacity increases with a decrease in the number of chlorine atoms. The current status of in-situ remediation of CHS in the vadose zone was summarized using biostimulation and bioaugmentation methods, indicating that adding nutrient substances and injecting anaerobic dechlorination strains of Dehalococcoides are effective means of remediation. Simultaneously, the factors influencing the biodegradation of CHS in the vadose zone were elaborated to acquire a systematic insight into the significance of redox characteristics (oxygen) on the degradation of CHS. Finally, research on the biodegradation of CHS in the vadose zone is prospected, and it is necessary to carry out research on the interactive relationship between different phases of CHS, the data monitoring of CHS, the structure of the functional bacterial community, and research and development of active strains to provide theoretical guidance for the in-situ remediation of CHS in the vadose zone. © 2022 Science Press. All rights reserved.     

Identification and assessment of environmental burdens of Chinese copper production from a life cycle perspective

The environmental burdens of Chinese copper production have been identified and quantified in the context of typical technologies, materials supplies and environmental emissions by a life cycle approach. Primary and secondary copper production using copper ores and scraps, respectively, were analyzed in detail. The flash and bath smelting approaches and the recycling of copper scraps were selected as representative copper production processes. A quantitative analysis was also conducted to assess the influence of material transport distance in copper production. Life cycle assessment （LCA） results showed that resources depletion and human health contribute significantly to environmental burdens in Chinese copper production. In addition, the secondary copper production has dramatically lower environmental burdens than the primary production. There is no obvious distinction in overall environmental burdens in primary copper production by flash or bath smelting approach. However, resources depletion is lower and the damage to human health is higher for flash smelting approach. Ecosystem quality damage is slight for both approaches. Environ- mental burdens from the mining stage contribute most in all life cycle stages in primary copper production. In secondary copper production, the electrolytic refining stage dominates. Based on the life cycle assessment results, some suggestions for improving environmental performance were proposed to meet the sustainable development of Chinese copper industry.     

Temporal and spatial evolution characteristics of sunshine duration over Qinghai-Tibet Plateau from 1961 to 2020北大核心CSCD

Based on observation data of daily sunshine duration from 1961 to 2020 at 175 meteorological observation stations over Qinghai-Tibet Plateau and its surrounding areas, spatial transformation analysis, climate trend analysis and M-K mutation test were used to analyze the temporal and spatial variation characteristics of the seasonal and annual sunshine duration in the region in the last 60 years. The results show that (1) annual average sunshine duration was 2 323 h, the maximum was 3 487 h in Gaer, Tibet, and the minimum was 771 h in Ya'an, Sichuan. The high-value areas were mostly located in western Tibet, northern Qinghai, western Gansu, and Xinjiang, and the low-value areas were mostly located in Nyingchi in Tibet, the mountainous area on the western edge of the Sichuan Basin, and northwestern Yunnan. The highest sunshine duration was recorded in winter (631 h), and the lowest was recorded in autumn (555 h) among the four seasons. (2) The average decrease in annual sunshine duration was 10.27 h/10 a. The largest rates of decrease were mainly in Gannan of Gansu and Ganzi of Sichuan, with the largest rate of decrease of 130 h/10 a. The areas with large rates of increase were mainly in Hotan area of Xinjiang, Liangshan of Sichuan and Lhasa of Tibet, with the largest increase of 61 h/10 a. Among the four seasons, spring exhibited an upward trend, and the remainder exhibited a downward trend. (3) Before 2017, the annual sunshine duration increased but declined after 2017. Spring sunshine duration had the largest number of mutation years, and the earliest mutation time was 1963. Winter had the fewest number of mutation years and the latest mutation time occurred in 2015. In summary, the annual and seasonal sunshine duration of Qinghai-Tibet Plateau vary greatly in space, but with the general characteristics of more sunshine in the northwest and less in the southeast, and sunshine hours were mainly decreasing, with 2017 as a mutation point of annual sunshine duration. Most areas of Qinghai-Tibet Plateau have great potential for photosynthetic production and are suitable for the development of light-loving plants and high-density planting. Shade-loving or shade-tolerant plants, including tea, are suitable for development in remote mountainous areas with low sunshine values in the western part of the basin, including Ya’an, Sichuan, and other areas, such as Medog, Tibet. © 2022 Science Press. All rights reserved.     

Recovery of NH 4 + by corn cob produced biochars and its potential application as soil conditioner

NH4^＋ ion, a main pollutant in aquatic systems, not only causes eutrophication in rivers and lakes but also contributes to fish toxicity. In this study, an eco-friendly biosorbent was prepared from the pyrolysis of corn cob, a low-cost agricultural residue. The biochars produced by pyrolysis of corn cob at 400℃ and 600℃ were characterized and investigated as adsorbents for NH4＋ -N from an aqueous solution. The biochars were characterized through elemental analysis, Brunauer-Emmett-Teller-N2 surface area analysis, scanning electron microscopy, and Fourier transform infrared spectroscopy. Batch experiments were conducted to investigate the NH4＋ adsorption process of the corn cob biochars. The Freundlich isotherm model fitted the adsorption process better than the Langmuir and Dubinin-Radushkevich isotherm models. Moreover, the adsorption process was well described by a pseudo-second-order kinetic model. Results of thermodynamic analysis suggested that adsorption was a nonspontaneous exothermic process. Biochars produced at 400℃ had higher adsorption capacity than those produced at 600℃ because of the presence of polar functional groups with higher acidity. The exhausted biochar can be potentially used as soil conditioner, which can provide 6.37 kg NH4＋-N-t^-1 （N fertilizer per ton of biochar）.