Sediment–Water Interactions in an Eroded and Heavy Metal Contaminated Peatland Catchment,Southern Pennines,UK

Atmospherically deposited lead in the upper layer of the heavily eroded peatlands of the Peak District, southern Pennines, UK, reaches concentrations in excess of 1,000 mg kg⁻¹. Erosion of the upper peat layer in this region is releasing lead, associated with eroded peat particles, into the fluvial system. Understanding the process mechanisms that control dissolved lead concentrations in contaminated peatland streams is vital for understanding lead cycling and transport in peatland streams. Many headwater streams of the southern Pennines recharge drinking water reservoirs. Measurements in the Upper North Grain (UNG) study catchment show that mean sediment-associated and dissolved lead concentrations are 102 ± 39.4 mg kg⁻¹ and 5.73 ± 2.16 μg l⁻¹, respectively. Experimental evidence demonstrates that lead can desorb from suspended sediments, composed of contaminated peat, into stream waters. In-stream processing could therefore account for the elevated dissolved lead concentrations in the fluvial system of UNG.     

Changes in Extractability of Cr and Pb in a Polycontaminated Soil After Bioaugmentation With Microbial Producers of Biosurfactants, Organic Acids and Siderophores

Partly because of the low bioavailability of metals, the soil cleaning-up using phytoremediation is usually time-consuming. In order to enhance the amount of metals at the plant's disposal, the soil bioaugmentation coupled together with phytoextraction is an emerging technology. In this preliminary work, two agricultural soils which mainly differed in their Cr, Hg and Pb contents (LC, low-contaminated soil; HC, high-contaminated soil) were bioaugmented in laboratory conditions by either bacterial (Bacillus subtilis, Pseudomonas aeruginosa, Pseudomonas fluorescens or Ralstonia metallidurans) or fungal inocula (Aspergillus niger or Penicillium simplicissimum) and incubated during three weeks. The LC soil pots bioaugmented with A. niger and P. aeruginosa contained higher concentrations of Cr (0.08 and 0.25 mg.kg⁻¹ dw soil) and Pb (0.25 and 0.3 mg.kg⁻¹ dw soil) in the exchangeable fraction F1 (extraction with MgCl₂) by comparison with the non-bioaugmented soil where neither Cr nor Pb was detected. Conversely, immobilization of Cr and Pb in the soil were observed with the other microorganisms. The soil bioaugmentation not only modified the metal speciation for the most easily extractable fractions but also modified the distribution of metals in the other fractions, to a lesser extent nevertheless. The difference in microbial concentrations between the bioaugmented or not HC soils reached up to 1.8 log units. Thus the microorganisms that we chose for the soil bioaugmentation were competitive towards the indigenous microflora. The PCA analysis showed close positive relationships between the microorganisms which potentially produced siderophores in the soil and the amount of Cr and Pb in the fraction F1.     

Degradation of petroleum hydrocarbons from bottom sludge of crude oil storage tanks using in-vessel composting followed by oxidation with hydrogen peroxide and Fenton

In this research the feasibility of aerated in-vessel composting process followed by chemical oxidation with H₂O₂ and Fenton for removal of petroleum hydrocarbons from oily sludge of crude oil storage tanks was investigated. The ratios of the sludge to immature compost were 1:0 (as abiotic control), 1:2, 1:4, 1:6, 1:8 and 1:10 (as dry basis) at a C:N:P ratio of 100:5:1 and 55 % moisture content for a period of 10 weeks. Six concentrations of H₂O₂ and Fenton were added to the compost mixture for a period of 24- and 48-h reaction times. Results showed that petroleum hydrocarbons removal in ratios of 1:2, 1:4, 1:6, 1:8 and 1:10 were 66.6, 73.2, 74.8, 80.2 and 79.9 %, respectively. The results of the abiotic experiments indicated that the main mechanism of hydrocarbon removal in the composting reactors was biological. The application of combined composting and chemical oxidation demonstrated a remarkable (about 88 %) overall removal. The study showed that in-vessel composting combined with chemical oxidation is a viable choice for the remediation of the sludge.     

Effectiveness of a biosurfactant in removing weathered crude oil from subsurface beach material

The University of Alaska Fairbanks Environmental Technology Laboratory is conducting ongoing research into the effectiveness of a biosurfactant, PES-51®, in removing weathered crude oil from beach material. A field test was conducted from 1 to 7 July 1993 in Sleepy Bay on La Touche Island in Prince William Sound. The results of chemical analysis of the beach material before and after treatment show that diesel range petroleum hydrocarbons are completely removed to levels below the detection limit of 0.5 mg kg⁻¹. Semivolatile petroleum hydrocarbons were reduced an average of 70%. The microbial data collected indicate that no inhibition of microbial activity in sediments is caused by treatment. The numbers and activity of hydrocarbon-degrading organisms were enhanced immediately following treatment and for about a month afterwards. There was no evidence of dissolved hydrocarbons or increased microbiological activity in seawater samples, providing evidence that oil was not transported offshore during the treatment process.     

添加剩余活性污泥无害化处理含油钻屑

采用剩余活性污泥对废弃含油钻屑进行无害化处理。考察了加入剩余活性污泥后混合物料中微生物浓度、碱解氮含量、有效磷含量、总石油烃(TPH)含量和组分的变化,并对降解后混合物料的生物毒性进行了评价。实验结果表明:加入剩余活性污泥后,总细菌浓度保持在较高水平;碱解氮含量逐渐减少后保持稳定,有效磷含量在一定范围内波动,整体略有增加;剩余活性污泥的加入量为20%～60%(w)时, TPH去除率均达到74%以上,远高于未添加剩余活性污泥的对照组(28.8%);剩余活性污泥的添加能有效促进微生物对含油钻屑中TPH的降解及氮元素的转化,添加50%(w)以上的剩余活性污泥能使处理后含油钻屑的生物毒性更低,更有利于含油钻屑的无害化处理。     

Organic contaminants in canadian municipal sludges

A comparison of several extraction methodologies for the analysis of base-neutral and acid organic contaminants (EPA priority pollutants) in municipal sludge was conducted. Sludge was spiked with selected contaminants and extracted wet and following air-drying by a variety of techniques such as dilution, centrifuge extraction, Soxhlet extraction and high speed mixing (Polytron^R, Waring^R and ultrasonic probe). All of the techniques produced variable rdsults. Recoveries of spiked compounds ranged from 0 to > 100% and, in general, the relative standard deviations ranged from 20 to 50%. Extraction of wet sludge using high speed mixing was considered to be the most satisfactory technique. Based on analyses of 15 municipal sludges derived mainly from industrial centres, it is suggested that agricultural utilization of Canadian sludges probably does not represent a significant organic contaminant hazard to the food chain. Organic contaminant concentrations in the sludges generally were < 10 mg kg⁻¹ dw. Phthalate esters in several sludges and polynuclear aromatic hydrocarbons (PAHs) in Hamilton sludge exceeded 10 mg kg⁻¹ dw; however, phthalate esters are readily degraded in soil and the Hamilton sludge is incinerated. “Acceptable” organic contaminant concentrations in sludges for use on pasture and arable lands are suggested. However, it is recommended that further analytical research be undertaken to develop more accurate and precise methods for measuring organic contaminants in municipal sludge and that an expanded program of sampling and analysis be undertaken to provide more reliable information concerning organic contaminant concentrations in Canadian sludges.     

Biodegradation of Poly(3-Hydroxybutyrate) Produced from Cupriavidus necator with Different Concentrations of Oleic Acid as Nutritional Supplement

The environmental impact caused by the disposal of plastics has motivated the development of biodegradable materials. Recent studies showed that supplementation with oleic acid (OA) in cultures producing poly(3-hydroxybutyrate), P(3HB), increased the polymer productivity. However only few studies have shown the properties and biodegradation profile of the polymer obtained. This research investigated the influence of OA concentration on the biodegradation of the P(3HB) obtained from cultures of Cupriavidus necator. The crystallinity of the casting films determined by differential scanning calorimetry (DSC) was reduced from 70% (0 g L⁻¹ of OA) to 52% (3.0 g L⁻¹ of OA). A reduction of 11 °C in the melting temperature was observed with 3.0 g L⁻¹ of OA. The kinetic of biodegradation was: 3.0 > 1.5 > 0.9 > 0.3 > 0 g L⁻¹ of OA.     

Trends in Chemical Composition of Wet-only Precipitation at Rural French Monitoring Stations Over the 1990–2003 Period

The long-term monitoring of precipitation and its chemical composition are important for identifying trends in rain quality and for assessing the effectiveness of pollution control strategies. A statistical test has been used to the atmospheric concentrations measured in the French rural monitoring network (MERA) in order to bring out spatio-temporal trends in precipitation quality in France over the period 1990–2003. The non-parametric Mann–Kendall test which has been developed for detecting and estimating monotonic trends in the time series was used and applied in our study at annual values of wet-only precipitation concentrations. The emission data suggest that SO₂ and NO _x emissions decreased (−3.3 and −2.0% year⁻¹, respectively) contrary to NH₃ emissions that increased slightly (+0.2% year⁻¹) over the period 1990–2002 in France. On the national scale, the pH values have a significant decreasing trend of −0.025 ± 0.02 unit pH year⁻¹. and concentrations in precipitation have a significant decreasing trend, −3.0 ± 1.6 and −3.3 ± 0.6% year⁻¹, respectively, corresponding with the downward trends in SO₂ emissions in France (−3.3% year⁻¹). A good correlation (R ² = 0.84) between SO₂ emissions and concentrations was obtained. The decreasing trend of was more significant (−5.4 ± 5.2% year⁻¹) than that of (−1.3 ± 2.4% year⁻¹). Globally, the concentration of the major ions showed a clear downward trend including marine and alkaline ions. In addition, the relative contribution of HNO₃ to acidity precipitation increased by 51% over the studied period.     

Relationship Between the Sediment Geochemistry and Phosphorus Fluxes in a Great Lakes Coastal Marsh,Cootes Paradise,ON, Canada

Cootes Paradise is a coastal wetland, adjacent to Hamilton Harbour at the western tip of Lake Ontario. The marsh has been considerably degraded due to the excessive sediment and nutrient input from sewage treatment plants (STPs), marsh tributaries and Combined Sewer Overflows (CSOs). Although there has been reduction in nutrient loadings from external sources, high nutrient levels, and a prolific algal growth remain a problem in Cootes Paradise. To assess the importance of external versus internal nutrient loadings to the marsh, nutrient fluxes from sediments were estimated using porewater profiles at three locations from 2001 and five additional sites from 2002. The fluxes varied between 0.27 and 5.25 mg P m⁻² day⁻¹, with sites receiving outfalls of STP and CSO having highest fluxes (∼5 mg P m⁻² day⁻¹). Mean phosphorus release rate of 2.02 mg P m⁻² day⁻¹ was calculated from the spatial distribution of the non-apatite inorganic phosphorus (NAI-P) in sediments, employing a relationship between the NAI-P and P fluxes. The results confirm that sediment P geochemistry is important in regulating the P pool in porewater which, consequently, governs the P fluxes from sediments.     

Comparison of PM2.5 and PM10 in A Suburban Area in Korea During April, 2003

Airborne particulate matter (PM) concentrations were measured in Iksan, a suburban area in South Korea during April, 2003. PM_2.5 (particles with an aerodynamic diameter less than 2.5 μm) and PM₁₀ (particles with an aerodynamic diameter less than 10 μm) samples were collected, and the chemical characteristics of particles were examined for diurnal patterns, yellow dust/rainfall influences, and scavenging effects. Average concentrations of PM_2.5 and PM₁₀ mass measured were 37.3 ± 16.2 μg m⁻³ and 60.8 ± 29.5 μg m⁻³, respectively. The sum of ionic chemical species concentrations for PM_2.5 and PM₁₀ was 16.9 ± 7.3 and 23.1 ± 10.1 μg/m³, respectively. A significant reduction in PM mass concentrations during rainfall days was observed for coarse mode (PM_{2.5 − 10}) particles, but less reduction was found for fine (PM_2.5) mass concentration. SO₄ ²⁻, NH₄ ⁺, and K⁺ predominated in fine particulate mode, NO₃ ⁻ and Cl⁻ predominated in fine particle mode and coarse particle mode, but Na⁺, Mg²⁺, and Ca²⁺ mostly existed in coarse mode. The high concentration of ammonium due to local emissions and long-range transport neutralized sulfate and nitrate to ammonium sulfate and ammonium nitrate, which were major forms of airborne PM in Iksan. Average mass concentrations of PM₁₀ in daytime and at night were 57.6 and 70.0 μg m⁻³, and those of PM_2.5 were 35.4 and 42.5 μg m⁻³, respectively. NO₃ ⁻ and Cl⁻ in both PM_2.5 and PM₁₀ were about double at night than in the daytime, while the rest of the chemical species were equal or a little higher at night than in the daytime. The results suggest the formation of ammonium nitrate and chloride when high ammonia concentration and low air temperature are allowed. Backward air trajectory analyses showed that air masses arriving at the site during yellow dust period were transported from arid Chinese regions, which resulted in high concentrations of airborne PM mass concentrations. In the meantime, air mass trajectories during a rainfall period were mostly from the Pacific Ocean or the East China Sea, along with a relatively low PM concentration.     

Artificial carbonation for controlling the mobility of critical elements in bottom ash

In municipal solid waste incineration (MSWI), bottom ash, generated at a stoker grate type incinerator, the critical elements were identified in terms of EU regulation. The stabilizing effect of moderate carbonation (pH 8.28 ± 0.03) on critical contaminants was studied through availability and diffusion leaching protocols. Data from the performed tests were evaluated with the goal of reusing MSWI bottom ash as secondary construction material. To investigate the mobilizing effect of CO₂, suspended MSWI bottom ash was severely carbonated (pH 6.40 ± 0.07). The effect of CO₂ and its interaction with other leaching factors, such as liquid/solid (L/S) ratio, leaching time, pH, ultrasound treatment, and leaching temperature, were examined using a reduced 2^6-1 experimental design. Contaminants identified as critical were Cr, Cu, Mo, Sb, Cl⁻, and SO₄ ²⁻. Although moderate carbonation decreased the release of Cr, Cu, Mo, and Sb from compacted bottom ash, the main disadvantage remains its inability to demobilize Cl⁻ and SO₄ ²⁻. The hypothesized mobilizing effect of severe carbonation was proven. The treatment enhanced the separation of critical components (α = 0.05) (except for Cl⁻), i.e., about fivefold for Sb and about twofold for Cr, Cu, and S. Nevertheless, the prospect is good that severe carbonation could constitute the deciding key parameter to facilitate the technical feasibility of a future washing process for MSWI bottom ash.     

Emission inventory of deca-brominated diphenyl ether (DBDE) in Japan

Atmospheric emissions of deca-brominated diphenyl ether (DBDE) in Japan were estimated based on the material flow of DBDE products and their emission factors. In 2002, the demand for DBDE in Japan was 2200 ton/year and the stock level was about 60 000 ton. The DBDE flow into the waste stream was estimated to be about 6000 ton/year and the flow out through second-hand product exports was more than 700 ton/year. Home appliance recycling facilities dismantle and crush domestic wastes containing about 600 ton of DBDE annually. Material recycling of crushed plastics is not commonly practiced as yet. Emission factors from plastics processing (2 × 10⁻⁹–1 × 10⁻⁷), textile processing (9 × 10⁻⁷), home appliance recycling (8 × 10⁻⁹–5 × 10⁻⁶), and waste incineration (1 × 10⁻⁷–2 × 10⁻⁶) were estimated using field measurement data. The DBDE emission rate through house dust during the service life of final products (2 × 10⁻⁷–9 × 10⁻⁷ per year) was estimated using the DBDE concentration in dust and the amount of dust in used televisions. Emission factors from previous studies were also used. The estimated total DBDE emission was 170–1800 kg/year. These results suggest the necessity of characterizing emissions during the service life of products, which is essential information for formulating an appropriate e-waste recycling strategy.     

Nitrogen Budget of a Spruce Forest Ecosystem After Six-year Addition of Ammonium Sulphate in Southwest Sweden

A nitrogen (N) budget was constructed for a period of 6 years (1988–1993) in a Norway spruce stand with current deposition of 19 kg N and 22 kg S ha⁻¹ year⁻¹. The stand was fertilized annually by addition of 100 kg N and 114 kg S ha⁻¹ (NS). Above and below ground biomass, litterfall, fine- root litter production, soil solution and net mineralization were measured to estimate pools, fluxes and accumulation of nitrogen. The average needle litterfall in control (C) and NS plots in 1993 was 2.2 and 2.5 ton ha⁻¹ year⁻¹, respectively. The fine root litter production prior to treatment (1987) was 4.4 ton ha⁻¹ year⁻¹ and after treatment (1993) it was 4.5 and 3.9 ton ha⁻¹ year⁻¹ in C and NS plots, respectively. Net N mineralization in the soil profile down to 50 cm was estimated to be 86 and 115 kg ha⁻¹ year⁻¹ in C and NS plots, respectively in 1992. During the treatment period the uptake of N in the needle biomass in C and NS plots was 29 and 77 kg ha⁻¹ year⁻¹, respectively. No N was accumulated in needles of C plot where the NS plots accumulated 34 kg ha⁻¹ year⁻¹. Of the annually added inorganic N to NS plots 47% was accumulated in the above and below ground biomass and 37% in the soil. N fluxes via fine-root litter production in the C plots were much higher (54 kg ha⁻¹ year⁻¹) than that via litterfall (29 kg ha⁻¹ year⁻¹). The corresponding values in the NS plots were 65 and 43 kg ha⁻¹ year⁻¹, respectively. Most of the net N mineralization occurred in the FH layer and upper mineral soil. It is concluded that fine root litter and litterfall play an important role in the cycling of N. Despite a high N uptake the losses of N in litterfall and fine root litter resulted in an incorporation of N in soil organic matter.     

Thiourea leaching of gold from processed municipal solid waste incineration residues

Incineration is one of the key technologies in disposal of municipal waste, which produces municipal solid waste incineration (MSWI) residues with high valuable metal contents. The recycling strategy for the MSWI residues is typically focused on the recovery of scrap metals yielding processed municipal solid waste incineration residues (PIR) as the main byproduct. However, the PIR still contains valuable metals, particularly gold, which cannot be extracted by conventional methods. Here, we evaluated the feasibility of using the 0.5–2.0 mm grain size fraction of PIR containing 28.82 ± 1.62 mg/kg of gold as raw material for a two-stage extraction process. In the first stage the alkalic fine-grained PIR was acidified with a solution of 20% (v/v) of HCl-containing flue gas cleaning liquid that is obtained by the municipal waste incineration plant itself as a waste product. In the second stage we leached the acidified fine-grained PIR by thiourea with Fe³⁺ as an oxidant. Application of the thiourea-Fe³⁺ leaching system resulted in recovery of 16.4 ± 1.56 mg/kg of gold from the fine-grained PIR within 6 h of incubation. Due to high gold market prices, upscaling of the suggested technology can represent a suitable strategy for gold recovery from PIR and other MSWI residues.

     

Field testing of conversion of sewage sludge to daily landfill cover material

Solidification of sewage sludge has been actively investigated in Japan and Europe since the 1970s. Most previous studies have focused on only the mechanical aspects of potential alternative cover soil made using sewage. Most solidification processes, however, suffer from severe odor problems because of the high alkalinity of the material. The objectives of this study are to develop a cost-effective solidifying agent for conversion of sewage sludge in order to reduce the odor generation, as an alternative to the conventional cement lime-based solidifying agent, and to demonstrate its applicability in the field experimentally. Field test results showed compressive strength well above the 1.0 kg/cm² criterion for landfill cover soil in Korea. Also, the permeability coefficient was far below the 5 × 10⁻⁵ cm/s design criterion for landfill cover soil. Even in harsh weather conditions, such as in winter and summer, the compressive strength was increased. In addition, the permeability was decreased from 3.45 × 10⁻⁶ cm/s to 4.78 × 10⁻⁷ cm/s, and from 2.27 × 10⁻⁶ cm/s to 3.62 × 10⁻⁷ cm/s, at 7 days after placement in January and August, respectively. It can therefore be postulated that the proposed solidification process is an appropriate alternative for production of daily landfill cover material. Concerning the odor problem, 5 min of mixing of sewage with TS103, one of the proprietary agents used in this work, was sufficient to suppress the concentration of ammonia emitted to below 10 ppm. Considering all of these experimental field test results, it is expected that the proposed method could be a competitive approach for manufacture of alternative landfill cover material.     

Chemical Recycling of Polyamide Waste at Various Temperatures and Pressures Using High Pressure Autoclave Technique

Chemical recycling of polyamide waste in water was studied using 0.5 L high pressure autoclave at temperatures of 150, 200, 210, 220,230 and 240 °C and at various pressures of 100, 200, 300, 400, 500, 600 and 700 psi (pound per square inch). Viscosity average molecular weight of the polyamide waste sample was determined by Ostwald method and recorded as 1.928 × 10³. The reaction was found to be first order with velocity constant in order of 10⁻² min⁻¹. The velocity constant and percent conversion of depolymerization reaction at 240 °C and 700 psi pressure were recorded as 2.936 × 10⁻² min⁻¹ and 99.99% respectively. The velocity constant was obtained on the basis of measurement of amine value. Kinetic and thermodynamic parameters such as energy of activation, frequency factor, enthalpy of activation were found to be 10.6 kJ mole⁻¹, 0.3719 min⁻¹ and 6.3 kJ mole⁻¹ respectively, at the optimum conditions for maximum depolymerization of polyamide waste.     

Arrested municipal solid waste incinerator fly ash as a source of polynuclear aromatic hydrocarbons (PAHs) to the environment

Arrested fly ash samples from most currently operating municipal solid waste (MSW) incinerators on the U.K. mainland have been analysed for polynuclear aromatic hydrocarbons (PAHs). The ashes have a mean ΣPAH content of about 227 μg kg⁻. This is generally lower than concentrations observed in U.K. surface soils. Benzo[ghi] perylene was the most abundant individual compound, and the most frequently detected. The ΣPAH content of ashes does not appear to be related to incinerator type, but rather it is likely that poor gas phase combustion favours higher PAH levels. The significance of PAHs in ash residues and their possible fate following disposal to landfill are discussed.     

Residual Cadmium and Lead Pollution at a Former Soviet Military Airfield in Tartu, Estonia

This paper presents data on the levels and dynamics of cadmium (Cd) and lead (Pb) concentration in the plants, soil, and groundwater of the landing corridor and airfield of a former Soviet military air base in Estonia, immediately at the end of its 40-year service in 1992 and over the following 8 yr. In 1991–92 we found high Cd concentrations in the meadow plants Trifolium pratense and Dactylis glomerata (up to 56 mg kg^-1). In 1993, the Cd concentration had dropped to 0.12–0.19 mg kg^-1, and stabilized in 1997–2000 at 0.04 mg kg^-1. Cd concentration in plants decreased significantly with increasing distance from the landing strip. Elevated Cd concentration (0.012 mg L^-1) was found in the fuel of the TU-22M (Backfire) strategic bombers. In 1991 and 1993, leaded fuel influenced the mean Pb concentration in plants (1.8–4.2 mg kg^-1). Average Pb concentration in both topsoil and the 30–40 cm soil horizon decreased between 1991 and 2000 from 28 to 6.5 and from 13.5 to 4.3 mg kg^-1, respectively. Cd concentration in the topsoil of the landingcorridor showed a significant increase between 1991 and 1993 (0.07–0.3 and 0.3–1.2 mg kg^-1, respectively), but stabilized later on the level of 0.04 mg kg^-1. The concentrations of both Pb and Cd in the soil were higher closer to the fuel bunkers. Current assessment of the movement of these metals from the vegetation to the soil and to groundwater is linked to potential leaching to the surrounding environment.     

Petroleum Hydrocarbons Rhizodegradation by Sebastiania commersoniana (Baill.) L. B. SM. & Downs

Petroliferous activities in Brazil have an accelerated development in the last years. As a consequence, the incidence of environmental accidents such as oil spills and contamination of soils has increased significantly. Therefore, it is extremely necessary to develop remediation techniques with lower costs, decontamination efficiency and impact minimisation. The aim of this work was to evaluate Sebastiania commersoniana phytoremediation potential in soil contaminated by petroleum. This species, which is a native tree, was selected due to its proven capacity for surviving in areas contaminated by petroleum. Experiments were carried out with soils that were vegetated but non-contaminated, soils that were freshly contaminated (25, 50 and 75 g kg^?1) but non-vegetated, and soils that were vegetated and contaminated, samples were collected 60 and 424 days after contamination with the purpose of evaluating the percentage of petroleum degradation in relation to the time. The results obtained in the present study allow us to state that S. commersoniana proves to be tolerant to petroleum contamination with respect to plant’s growth. The degradation of petroleum hydrocarbons was evaluated by gas chromatography with a flame ionisation detector (GC-FID) equipped with a capillary column HP-5 (5% phenyl-methylpolysiloxane, 30 m; 0.25 mm; 0.25 μm). According to chromatographic analysis, samples in contact with S. commersoniana showed a significant area reduction of the hydrocarbon peaks. Analysis of the 60-day samples showed a reduction of petroleum hydrocarbons area higher than 60% and the 424-day samples showed a reduction higher than 94%, which demonstrates that a petroleum degradation process is occurring.     

Characterization of residues from dismantled imported wastes

Residues from the imported wastes dismantling process create a great burden on the ambient environment. To develop appropriate strategies for the disposal of such residues, their characteristics were studied through background value analysis and toxicity leaching tests. Our results showed that the heavy metals concentrations in residues were high, particularly those of Cu (7180 mg kg^?1), Zn (2783 mg kg^?1), and Pb (1954 mg kg^?1). Toxicity leaching tests revealed a high metal releasing risk of such residues if they are disposed of in a landfill. However, the residues of imported wastes were also found to have some intrinsic metal recycling value.