Fate of DDT and parathion in grapes processed into Arak,an alcoholic beverage

Abstract

Arak, the national alcoholic drink in Lebanon, was prepared from grapes to which either DDT or parathion had been added. Samples of the nine fractions produced from the fermentation and distillation steps were analyzed for DDT and parathion and their respective metabolites.

DDT degraded to DDD during the fermentation step resulting in a sharp decrease in DDT level. The two distillation steps contributed to a further decrease in the DDT level so that the final product contained less than 2% of the amount found in the fresh grape juice. Although the concentration of DDD increased sharply during fermentation, it also decreased to a negligible level during the subsequent distillation procedure.

Parathion was more stable than DDT during the fermentation and first distillation steps. However, the second distillation process caused a share decline in its level and the Arak contained only about 6% of the residues present in the fresh juice, paranitrophenol being the only metabolite detected.     

The metabolic fate of 14C‐parathion by some fresh water phytoplankton and its possible effects on the algal metabolism

Abstract

The growth and total carbohydrate contents of Nostoc muscorum and Tolypothrix tenuis were greatly and significantly reduced by the application of parathion. “Chlorophyll a”, carotene biosynthesis and the rate of glucose absorption were enhanced after supplementation of parathion to the culture media of both cyanobacteria. Nitrogen released to the media, total nitrogen content and total nitrogen fixed were increased in both organisms‐ Increase in protein content was accompanied by remarkable drop in amino, peptide and ammonia fractions‐ Phosphorus uptake, RNA, DNA and total phosphorus content were accelerated to reach maximum accumulation at the highest insecticide level. In metabolism study using ¹⁴C‐labelled compound, parathion was readily degraded by Nostoc and Tolypothrix. Following ten days incubation, the aqueous fractions contained 21.1% and 18.1% of the initial activity in Nostoc and Tolypothrix respectively. TLC analysis of the hydrolytic products revealed the presence of three metabolites: p‐aminophenol, p‐nitrophenol and aminoparathion.     

Dissipation of DDT in natural water under field conditions

Abstract

¹⁴C‐DDT dissipated gradually from natural water under outdoor conditions and declined to 40% of the applied radioactivity after 5 months. The losses are due to adsorption to particulates and volatilization from the water surface. In natural water DDT undergoes gradual conversion to DDE as the major degradation product and to a lesser extent to DDD. It may be concluded that DDT dissipates and degrades fairly rapidly in subtropical natural waters. Adsorption to particulate matter contributes to partial “removal” of DDT.     

Behaviour of DDT under laboratory and outdoor conditions in Germany

Abstract

Experiments were conducted on adsorption, volatilization and UV‐degradation of p,p'‐DDT on soil surface, and leaching and degradation in sand columns. p,p'‐DDT was shown to adsorb stronger to soils with higher organic content. UV irradiation at 290 nm for 10 hours mineralized less than 0.1% of DDT in soil.

Results show that only 0.1% of DDT volatilized in a sun‐exposed semi‐closed quartz system. Polar compounds accounted from 1.4% after 55 days. The rate of volatilization and degradation in an open system was much higher; only 15% DDT and 7% DDE were recovered after 6 weeks in the organic extract. p,p'‐DDT was adsorbed to a great extent on the top layers of sand columns; 86% in the top 8 cm.     

Photochemical Behavior of Parathion in the Presence of Humic Acids from Different Origins

This paper reports the effect of ultraviolet radiation on the degradation of pesticide ethyl parathion in the presence of humic acids. Ethyl parathion was completely degraded in 300 min using an artificial lamp of 7.41 × 10^{? 10} einstein/s. Humic acid from peat did not influence the photochemical rate (k = 8.92 × 10^?3 min). However, in the presence of aquatic humic acid, the photochemical rate was higher (11.5 × 10^?3 min). The analytical determinations show the presence of p-nitrophenol and aminophenol in the reaction medium during the photochemical experiments. The kinetic of degradation in all experiments obeyed a first-order reaction pattern.     

Studies on the dissipation of 14C‐DDT from water and solid surfaces

Abstract

Dissipation of ¹⁴C‐p,p'‐DDT from water was studied for 180 days under outdoor conditions. DDT dissipated rapidly with overall half‐life of 53 days. The main degradation products were p,p'‐DDE and p,p'‐DDD. A portion of ¹⁴C‐residues was found in the sediment plus biomass (pellet) and on the inner surface of the glass container. This amounted to 7.2 and 6.7% of the initially added radioactivity, respectively. After 6 months, bound¹⁴C was more as compared to extractable ¹⁴C and p,p'‐DDD was the major metabolite of p,p'‐DDT in the extractable fraction. DDT dissipated from clay plates under indoor conditions with an overall half‐life of 160 days.     

Investigation of pesticide residues in water,sediments and fish samples from Tapi River,India as a case study and its forensic significance

Abstract

This research is a case study on detection of pesticides in river water, sediment as well as fish samples from Tapi River, among the major rivers of Gujarat, India. To investigate the misuse, concentration level and occurrence patterns of persistent pesticides, samples were collected from the river. Chlorpyrifos, methyl parathion, hexachlorocyclohexane (HCH), dichloro diphenyl trichloroethane (DDT) and endosulfan were analyzed by gas chromatography technique with flame ionization detector (FID). Scanty reports are available, but after 1999, no such data are reported as some of these pesticides have been banned. Although these pesticides are still in use which we observed from the obtained results. In this river, the amount of endosulfan, chlorpyrifos, and methyl parathion was observed in surface water with concentrations of 37.56?µg/L, 0.86?µg/L and 0.43?µg/L, respectively. Endosulfan, DDT and methyl parathion detected in sediment were 38.38?ng/g, 0.65?ng/g and 0.77?ng/g, respectively. In fish samples, levels of endosulfan, chlorpyrifos, and methyl parathion detected were 101.28, 0.392, and 3.49?ng/g correspondingly. Results showed that highly toxic pesticides are still being used in the surrounding area, and there is an urgent need for enforcement of rules to control the production and application of such pesticides.     

Remediation of DDT-Contaminated Water and Soil by Using Pretreated Iron Byproducts from the Automotive Industry

The objective of this study was to quantify the effectiveness of different pretreated iron byproducts from the automotive industry to degrade DDT [(1,1,1-trichloro-2,2-bis(4-chlorophenyl) ethane] in aqueous solutions and soil slurry. Iron byproducts from automotive manufacturing were pretreated by three different methods (heating, solvent and 0.5N HCl acid washing) prior to experimentation. All pretreated irons were used at 5% (wt v^{? 1}) to treat 0.014 mM (5 mgL^{? 1}) of DDT in aqueous solution. Among the pretreated irons, acid pretreated iron results in the fastest destruction rates, with a pseudo first-order degradation rate of 0.364 d^{? 1}. By lowering the pH of the DDT aqueous solution from 9 to 3, destruction kinetic rates increase more than 20%. In addition, when DDT-contaminated soil slurry (3.54 mg kg^{? 1}) was incubated with 5% (wt v^{? 1}) acid-pretreated iron, more than 90% destruction of DDT was observed within 8 weeks. Moreover, DDT destruction kinetics were enhanced when Fe(II), Fe(III) or Al(III) sulfate salts were added to the soil slurry, with the following order of destruction kinetics: Al(III) sulfate > Fe(III) sulfate > Fe(II) sulfate. These results provide proof-of concept that inexpensive iron byproducts of the automotive industry can be used to remediate DDT-contaminated water and soil.     

Environmental implications of soil remediation using the Fenton process

This work evaluates some collateral effects caused by the application of the Fenton process to 1,1-bis(4-chlorophenyl)-2,2,2-trichloroethane (DDT) and diesel degradation in soil. While about 80% of the diesel and 75% of the DDT present in the soil were degraded in a slurry system, the dissolved organic carbon (DOC) in the slurry filtrate increased from 80 to 880mgl(-1) after 64h of reaction and the DDT concentration increased from 12 to 50microgl(-1). Experiments of diesel degradation conducted on silica evidenced that soluble compounds were also formed during diesel oxidation. Furthermore, significant increase in metal concentrations was also observed in the slurry filtrate after the Fenton treatment when compared to the control experiment leading to excessive concentrations of Cr, Ni, Cu and Mn according to the limits imposed for water. Moreover, 80% of the organic matter naturally present in the soil was degraded and a drastic volatilization of DDT and 2,2-bis(4-chlorophenyl)-1,1-dichloroethylene was observed. Despite the high percentages of diesel and DDT degradation in soil, the potential overall benefits of its application must be evaluated beforehand taking into account the metal and target compounds dissolution and the volatilization of contaminants when the process is applied.     

Photosensitized degradation of Irgarol 1051 in water

Irgarol 1051 (2-methylthio-4-tert-butylamino-6-cyclopropylamino-s-triazine) is a herbicide analogue that is added to antifouling agents used on ships. Our former study on its degradation in sunlight suggested that unknown photosensitizers in natural waters accelerated the photodegradation to the degradation product, M1. In this study, the photodegradation of Irgarol in water was investigated in the presence of some photosensitizers. Test water containing Irgarol or M1, with or without photosensitizers, was irradiated with light from a UV-A fluorescent lamp for 48h. The concentrations of Irgarol and M1 in the test water were determined by HPLC after solid-phase extraction. M1 was more stable than Irgarol when irradiated in the presence of photosensitizers such as acetone, benzophenone, tryptophan, and rose bengal. Hydrogen peroxide (HP) accelerated the photodegradation of Irgarol, and the product M1 was degraded in the presence of more than 100mgl(-1) HP after 10h. Natural humic substances (NHS) also accelerated the photodegradation of Irgarol, but in this case, the product M1 persisted even when Irgarol was completely degraded. Photosensitized degradation of Irgarol by NHS may result in the accumulation of M1 in aquatic environments.     

Aerobic degradation of diuron by aquatic microorganisms

Abstract

Degradation of diuron [3‐(3,4‐dichlorophenyl)‐l,1‐dimethyl‐urea] by microorganisms obtained from pond water and sediment was determined under aerobic conditions. Enrichment procedures were used to isolate cultures capable of degrading the herbicide. Several mixed fungal/bacterial and mixed bacterial cultures were isolated that could degrade diuron. The mixed cultures degraded 67–99% of the added diuron forming from six to seven products which were separated via TLC. The major degradation product detected in most culture extracts was 3,4‐dichloroaniline. Other identified products formed were 3‐(3,4‐dichlorophenyl)‐1‐methylurea and 3‐(3,4‐dichlorophenyl)urea.     

The dissipation of nonlyphenol in stream and pond water under simulated field conditions

Abstract

The dissipation of 1.0 ppm nonylphenol in stream and pond water, incubated in flasks at 16°C under simulated field conditions up to 44 days indicated that the half‐life was 2.5 days if the flasks were open, and 16 days if they were closed. A transformed product was detected in the closed flasks.

Translocation of nonylphenol in water occurred when treated water samples were incubated in the presence of sediment. After 10 days, nonylphenol was detected only in the sediment, but not in water (detection limit = 10 ppb). About 80% of the nonylphenol was degraded in 71 days, but no degradation occurred if the water and the sediment were autoclaved prior to incubation.     

Organophosphorus insecticide residues in farm ditches of the Lower Fraser Valley of British Columbia

Abstract

Farm ditches flowing into three important rivers in the Lower Fraser Valley of British Columbia, Canada, were sampled periodically at seven locations from July to December in 1991, to determine the occurrence and levels of seven organophosphorus (OP) insecticides. Based oh sales records for the year, the uses of OP insecticides in this area were as follows: malathion > diazinon > parathion > dimethoate > azinphos‐methyl > fensulfothion, but no sales of chlorfenvinphos. Residues of parathion, diazinon, fensulfothion, dimethoate and chlorfenvinphos were detected at levels ranging from 1 ‐ 7,785 >μg/kg in cropped soils collected from areas adjacent to the sites for sampling ditch water and sediments. Malathion and azinphos‐methyl were not detected in any of the substrates studied, demonstrating their rapid degradation in the environment. Diazinon and dimethoate were consistently found in ditch water at seven locations, with an average concentration of 0.07 μg/L and 0.27 μg/L, respectively. Fensulfothion and parathion, with an average concentration of 0.08 μg/L and 0.17 μg/L, respectively, were sporadically found in ditch water at two locations. In ditch sediments, diazinon was detected at three locations and fensulfothion at two. The average concentrations of these two insecticides were 16 μg/kg and 9 jug/kg, respectively. The potential impact on aquatic organisms of these OP insecticides in ditches is discussed.     

Parathion degradation and its intermediate formation by Fenton process in neutral environment

The purpose of this study is to investigate parathion degradation by Fenton process in neutral environment. The initial parathion concentration for all the degradation experiments was 20 ppm. For hydrogen ion effect on Fenton degradation, the pH varied from 2 to 8 at the [H₂O₂] to [Fe²⁺] ratio of 2-2 mM, and the result showed pH 3 as the most effective environment for parathion degradation by Fenton process. Apparent degradation was also observed at pH 7. The subsequent analysis for parathion degradation was conducted at pH 7 because most environmental parathion exists in the neutral environment. Comparing the parathion degradation results at various Fenton dosages revealed that at Fe²⁺ concentrations of 0.5, 1.0 and 1.5 mM, the Fenton reagent ratio ([H₂O₂]/[Fe²⁺]) for best-removing performance were found as 4, 3, and 2, resulting in the removal efficiencies of 19%, 48% and 36%, respectively. Further increase in Fe²⁺ concentration did not cause any increase of the optimum Fenton reagent ratio for the best parathion removal. The result from LC-MS also indicated that hydroxyl radicals might attack the PS double bond, the single bonds connecting nitro-group, nitrophenol, or the single bond within ethyl groups of parathion molecules forming paraoxons, nitrophenols, nitrate/nitrite, thiophosphates, and other smaller molecules. Lastly, the parathion degradation by Fenton process at the presence of humic acids was investigated, and the results showed that the presence of 10 mg L⁻¹ of humic acids in the aqueous solution enhanced the parathion removal by Fenton process twice as much as that without the presence of humic acids.     

Isolation and characterization of an Alcaligenes sp. strain DG-5 capable of degrading DDTs under aerobic conditions

In this study, an Alcaligenes sp. strain DG-5 that can effectively degrade dichlorodiphenyltrichloro-ethanes (DDTs) under aerobic conditions was isolated from DDTs-contaminated sediment. Various factors that affect the biodegradation of DDTs by DG-5 were investigated. About 88 %, 65 % and 45 % of the total DDTs were consumed within 120 h when their initial concentrations were 0.5, 5 and 15 mg L?1, respectively. However, almost no degradation was observed when their concentration was increased to 30 mg L?1, but the addition of nutrients significantly improved the degradation, and 66 % and 90 % of the total DDTs were degraded at 336 h in the presence of 5 g L?1 peptone and yeast extract, respectively. Moreover, the addition of 20 mM formate also enhanced the ability of DG-5 to transform DDTs, and its DDT transformation capacity (T(c)) value was increased by 1.8 - 2.7 fold for the pure (p,p'-DDT or o,p'-DDT only) and mixed systems (p,p'-DDT, o,p'-DDT, p,p'-DDD and p,p'-DDE). Furthermore, it was found that competitive inhibition in the biodegradation by DDT compounds occurred in the mixed system.     

Determination of organochlorine and organophosphate pesticide residues in fruits,vegetables and sediments

Abstract

A method is described for the determination of organochlorine and organophosphate pesticide residues in fruits, vegetables and sediments. The concentrated solvent extract was sealed in a polymeric membrane tube, dialysed in cyclohexane and the solvent replaced with hexane. The organophosphates were analysed on a specific thermionic detector without further clean‐up. For the organochlorine pesticides the extract was eluted through 3 g of alumina and analysed on GC/ECD. The clean‐up for sediment extract was carried out on a10 g alumina column with 100 mL hexane containing 5% acetone and the eluate was concentrated to 5 mL.

The detection limit for organophosphates on a 40 g sample and a final volume of 10 mL was on the average 0.01 mg/kg. The detection limit for organochlorine pesticides, with the final volume of 25 mL, was 0.005 mg/kg for all pesticides except for p,p'‐DDT and endosulfan sulphate, which was 0.01 mg/kg.

The detection limit for oganochlorine pesticides in sediment, with the final volume of 2 mL, was less than 1 μg/kg and for organophosphate pesticides less than 10 μg/kg when the final volume was made to 0.5 mL. At the detection limits the method produced a very high coefficient of variation for both organochlorine and organophosphate pesticides.     

Isolation and characterization of an Alcaligenes sp. strain DG-5 capable of degrading DDTs under aerobic conditions

In this study, an Alcaligenes sp. strain DG-5 that can effectively degrade dichlorodiphenyltrichloro-ethanes (DDTs) under aerobic conditions was isolated from DDTs-contaminated sediment. Various factors that affect the biodegradation of DDTs by DG-5 were investigated. About 88 %, 65 % and 45 % of the total DDTs were consumed within 120 h when their initial concentrations were 0.5, 5 and 15 mg L^?1, respectively. However, almost no degradation was observed when their concentration was increased to 30 mg L^?1, but the addition of nutrients significantly improved the degradation, and 66 % and 90 % of the total DDTs were degraded at 336 h in the presence of 5 g L^?1 peptone and yeast extract, respectively. Moreover, the addition of 20 mM formate also enhanced the ability of DG-5 to transform DDTs, and its DDT transformation capacity (T_c) value was increased by 1.8 - 2.7 fold for the pure (p,p’-DDT or o,p’-DDT only) and mixed systems (p,p’-DDT, o,p’-DDT, p,p’-DDD and p,p’-DDE). Furthermore, it was found that competitive inhibition in the biodegradation by DDT compounds occurred in the mixed system.     

Determination of optimal water solubility of capsaicin for its usage as a non-toxic antifoulant

BACKGROUND: Capsaicin, a non-toxic natural product antifoulant, is an attractive alternative to the currently used toxic metal-based antifoulants for protecting the submerged surfaces. The problem associated with conducting capsaicin experiments is its limited aqueous solubility. METHODS: A procedure was developed to obtain the maximum capsaicin concentration in water. Capsaicin was first dissolved in one of the three organic solvents, methanol, ethanol, and acetone. The organic solvent was replaced by gradually adding distilled water and evaporating the organic solvent. RESULTS: The best solvent for obtaining highest concentration of capsaicin in water was ethanol. A maximum capsaicin in water 6400 ppm was achieved by using 16 mg capsaicin dissolved in 0.8 ml ethanol followed with the addition of 2.5 ml distilled water in 0.2 ml increments and then slow evaporation of the solvent. CONCLUSION: The concentration obtained using our approach is well above the threshold concentration of capsaicin in deterring the marine organism attachments.     

Behavior of atrazine in soils of tropical zone

Abstract

Movement and degradation of ¹⁴C‐atrazine (2‐chloro 4‐(ethylamino)‐6‐(isopropylamino)‐s‐triazine, was studied in undisturbed soil columns (0.50m length × 0.10m diameter) of Gley Humic and Deep Red Latosol from a maize crop region of Sao Paulo state, Brazil. Atrazine residues were largely confined to the 0–20cm layers over a 12 month period Atrazine degraded to the dealkylated metabolites deisopropylatrazine and deethylatrazine, but the major metabolite was hydroxyatrazine, mainly in the Gley Humic soil. Activity detected in the leachate was equivalent to an atrazine concentration of 0.08 to 0.11μg/1.

The persistence of ¹⁴C‐atrazine in a maize‐bean crop rotation was evaluated in lysimeters, using Gley Humic and Deep Red Latosol soils. Uptake of the radiocarbon by maize plants after 14‐days growth was equivalent to a herbicide concentration of 3.9μg/g fresh tissue and was similar in both soils. High atrazine degradation to hydroxyatrazine was detected by tic of maize extracts. After maize harvest, when beans were sown the Gley Humic soil contained an atrazine concentration of 0.29 μg/g soil and the Deep Red Latosol, 0.13 μg/g soil in the 0–30 cm layer. Activity detected in bean plants corresponded to a herbicide concentration of 0.26 (Gley Humic soil) and 0.32μg/g fresh tissue (Deep Red Latossol) after 14 days growth and 0.43 (Gley Humic soil) and 0.50 μg/g fresh tissue (Deep Red Latossol) after 97 days growth. Traces of activity equivalent to 0.06 and 0.02μg/g fresh tissue were detected in bean seeds at harvest. Non‐extractable (bound) residues in the soils at 235 days accounted for 66.6 to 75% (Gley Humic soil and Deep Red Latossol) of the total residual activity.     

Persistence of diflubenzuron and bay sir 8514 in natural and sterile sandy loam and organic soils

Abstract

Disappearance rates of 10 ppm technical diflubenzuron (N(((4‐chloro‐phenyl)amino)carbonyl)‐2,6‐diflurobenzamide, Dimilin^®) and BAY SIR 8514 (2‐chloro‐N(((4‐trifluoromethoxyphenyl)amino)carbonyl)benzamide) applied on quartz sand to natural sandy loam and muck soils were significantly greater than for the corresponding sterilized soils, e.g. 47–51% vs. 68–87% BAY SIR 8514 and 2–12% vs. 80–87% diflubenzuron remaining at 12 wk, indicating that soil microorganisms play a major role in their degradation. Kinetic analysis of the data based on a first order dependence on the insecticide concentration showed that the rate constants for these disappearance reactions decreased with time.