Diffusion mechanism of lindane into wood charcoal

Abstract

The wood charcoal treated by 1N HNO₃ (WCT) was used to remove toxic chlorinated pesticide lindane (y‐HCH) residue from water by the sorption process. Using a simple first order reversible kinetics constants and half time equations, the film and pore diffusion coefficients were determined. Film diffusion was found to be rate limiting step in sorbing lindane by WCT. This was further authenticated by kinetics studies at different initial sorbate concentrations, different sorbent sizes, and different agitation speeds besides interruption test. A pore diffusion model was used to fit the data of kinetics in continuously mixed batch reactors (CMBR), and the tortuosity, external resistance, and surface diffusion effects on lindane sorption by WCT were noticed. The tortuosity values of 15 to 28 were obtained for WCT‐lindane system.     

Removal mechanism of endosulfan sorption onto wood charcoal

Endosulfan is among the most widely used pesticides in developing countries and other parts of the world and has been found to contaminate various parts of the environment, including drinking water sources. In an earlier study to find a suitable adsorbent to remove endosulfan, wood charcoal was found to give promising results. In the present study, the process controlling the rate of endosulfan sorption onto wood charcoal and the mechanism of removal were examined using various methodologies. Both film and pore diffusion coefficients were determined, and the linearity of the rate constants of adsorption with initial endosulfan concentrations revealed the process to be controlled by film diffusion. This was supported by the linear fit of the rate constants with the inverse of the diameter of adsorbent particles and the change in adsorption rates with agitation speed. Multiple interruption tests also revealed that endosulfan sorption onto wood charcoal is controlled by film diffusion. The increase in reaction rate constant with temperature and isosteric heat of adsorption in the range of -2.655 to 5.185 kcal/mol implied that the endosulfan removal process was endothermic in nature. The activation energy of 2.33 kcal/mol, which was less than 12 kcal/mol, revealed that the removal mechanism could be attributed to physisorption with a major contribution of van der Waals and electrostatic forces.     

Adsorbent selection for endosulfan removal from water environment

In the present study, an attempt was made to select a low cost adsorbing material for the removal of endosulfan [C,C'-(1,4,5,6,7,7-hexachloro-8,9,10- trinorborn-5-en-2,3-ylene)(dimethylsulphite)] from water. Various low cost adsorbents like wood charcoal, kimberlite tailings, silica, macro fungi sojar caju were tried with activated charcoal as reference material. The above materials were selected from various sources encompassing organic, inorganic, clayey, and biological sources. For the selection of suitable adsorbent for endosulfan uptake, maximum adsorption capacity (Qmax) was chosen as the parameter. Kinetic profiles of removal were generated for all the materials to assess the equilibrium time. Equilibrium studies were carried out for all materials to assess the adsorption equilibrium model that they followed. The model that gave the best correlation coefficient by linear regression analysis, was adopted for the calculation of Qmax of the corresponding adsorbent material. Using linearised forms of equilibrium models like Langmuir, BET, and Freundlich, maximum adsorptive capacities were determined. Activated charcoal showed the best adsorptive capacity with Qmax of 2.145 mg/g followed by wood charcoal 1.773 mg/g, sojar caju 1.575 mg/g, kimberlite tailings 0.8821 mg/g, and silica 0.3231 mg/g. Albeit activated charcoal gave better performance, it was not considered as a candidate material because of its high cost. Wood charcoal was the next best adsorbent with Qmax 1.773 mg/g. Therefore, wood charcoal was chosen as the best material for endosulfan removal. The study of physical and chemical characteristics of wood charcoal revealed that it is a potential adsorbent and can even be improved further.     

Removal of 2, 4‐D from aqueous solution by the adsorbents from spent bleaching earth

Abstract

The removal of 2, 4‐D (2, 4‐ dichlorophenoxyacetic acid) from aqueous solutions by activated spent bleaching earths (SBE) was studied at 20 °C. Experiments were performed as a function of time, initial concentration, dose and particle size of the adsorbent. The Langmuir and Freundlich adsorption equations were fitted by the adsorption data obtained. The values of Langmuir and Freundlich constants were determined. The adsorption kinetic was found to follow Lagergren equation. Both the boundary layer and intraparticle diffusion played important roles in the adsorption rate of 2, 4‐D. As the size of the adsorbent increased, the time to reach equilibrium increased but adsorption capacity decreased.     

Removal of endosulfan using aerobic mixed bacterial culture

With the increasing use of pesticides in modern agriculture, increased evidence of their disastrous effects on the environment has been noticed. Pesticides applied in various modes and places contaminate various parts of the environment, including groundwater sources. As pesticide problems are greater in the rural areas, the authors have developed a successful low-cost technology for rural areas with wood charcoal treated with nitric acid. As pesticides are classified as hazardous waste, the sludge resulting from their treatment has to be disposed off safely. This paper describes the removal of pesticides at a higher concentration of 24 mg/l, using a mixed culture of aerobic bacteria, and also a study of the inhibiting action of endosulfan on bacterial cells. It was found that bacteria without acclimatisation could remove 89.7% of endosulfan, and with prior acclimatisation the efficiency was 96%. It was found that removal in the initial phase is because of the hydrophobic nature of endosulfan and its affinity to sediments. The adsorbed endosulfan subsequently undergoes biotransformation, which has been confirmed by monitoring endosulfan concentrations in the bacterial sludge. Transformation was found to be significant in the acclimatised culture system. The fluctuation in bacterial performance was greater at lower concentrations of endosulfan, and overall inhibition was greater at higher concentrations.     

Removal of 2,4-D from aqueous solution by the adsorbents from spent bleaching earth

The removal of 2,4-D (2,4-dichlorophenoxyacetic acid) from aqueous solutions by activated spent bleaching earths (SBE) was studied at 20 degrees C. Experiments were performed as a function of time, initial concentration, dose and particle size of the adsorbent. The Langmuir and Freundlich adsorption equations were fitted by the adsorption data obtained. The values of Langmuir and Freundlich constants were determined. The adsorption kinetic was found to follow Lagergren equation. Both the boundary layer and intraparticle diffusion played important roles in the adsorption rate of 2,4-D. As the size of the adsorbent increased, the time to reach equilibrium increased but adsorption capacity decreased.     

Ozonation of aqueous solution of alpha endosulfan

Ozonation of alpha endosulfan and the effects of some parameters such as pH, temperature and partial pressure on ozonation were investigated and the kinetic constants were calculated in this study. Alpha endosulfan solutions were ozonated in a lab-scale semi-batch reactor under variable experimental conditions. Increase in dissolved ozone concentration had a positive effect on oxidation rate. Alpha endosulfan could be removed up to 94% at pH 4 for an ozonation time of 60 minutes. The oxidation reaction was found to be of second order and of first order with respect to both ozone and alpha endosulfan. The temperature dependent reaction expression of alpha endosulfan was obtained as kd = (1.889 exp(- 2.21 x 10(-3)/T). It was concluded that, although the rate of reaction was lower than the rate of other pesticide oxidation reported in the literature. alpha endosulfan presented an obvious reaction to ozonation.     

Some models for the adsorption kinetics of pesticides in soil

Abstract

Three models describing adsorption‐desorption kinetics of pesticides in soil, that could be incorporated into computer programs on pesticide movement in soil, were discussed, The first model involved single first‐order rate equations for adsorption and desorption. Results from an analytical and a numerical solution for local equilibration were compared. Concentration‐time relationships for the solution and adsorbed phases were calculated for different rate constants, initial conditions, and partition ratios at equilibrium. The second model described simultaneous adsorption‐desorption equilibration with two mechanisms, both with their own rate constants. After a comparatively fast equilibration with the first mechanism, there was a gradual increase in extent of overall‐adsorption, accompanied with a shift to greater amounts adsorbed by the second mechanism. With the third model, adsorption equilibration occurred by diffusion into a stagnant region. With diffusion distances ranging from 0.1 to 4.0 cm, the time needed for approach to adsorption equilibrium varied from about 0.25 days to about one year. Some of the possibilities of these models were discussed considering published experimental results.     

Enrichment and Isolation of a Mixed Bacterial Culture for Complete Mineralization of Endosulfan

In the present study, we isolated three novel bacterial species, namely, Staphylococcus sp., Bacillus circulans–I, and Bacillus circulans–II, from contaminated soil collected from the premises of a pesticide manufacturing industry. Batch experiments were conducted using both mixed and pure cultures to assess their potential for the degradation of aqueous endosulfan in aerobic and facultative anaerobic condition. The influence of supplementary carbon (dextrose) source on endosulfan degradation was also examined. After four weeks of incubation, mixed bacterial culture was able to degrade 71.82 ± 0.2% and 76.04 ± 0.2% of endosulfan in aerobic and facultative anaerobic conditions, respectively, with an initial endosulfan concentration of 50 mg l^?1. Addition of dextrose to the system amplified the endosulfan degradation efficiency by 13.36 ± 0.6% in aerobic system and 12.33 ± 0.6% in facultative anaerobic system. Pure culture studies were carried out to quantify the degradation potential of these individual species. Among the three species, Staphylococcus sp. utilized more beta endosulfan compared to alpha endosulfan in facultative anaerobic system, whereas Bacillus circulans–I and Bacillus circulans–II utilized more alpha endosulfan compared to beta endosulfan in aerobic system. In any of these degradation studies no known intermediate metabolites of endosulfan were observed.     

Removal of lignin and tannin colour from aqueous solution by adsorption onto activated charcoal

Sorptive uptake of lignin and tannin from an aqueous phase by activated charcoal was investigated in the laboratory. The sorption reaction was found to be of a first order. The influence on the rate of sorption of various factors, such as amount of sorbent and pH of the system, have been investigated. Sorption data fit well into the Langmuir adsorption isotherm, indicating formation of a monolayer over a homogeneous sorbent surface. Sorption capacity, rate constant, intraparticle diffusion coefficient, etc. were calculated from the sorption data. Desorption studies indicate the irreversible nature of the sorption reaction, whereas interruption studies suggest film diffusion to be rate limiting.     

Extended geometric method: a simple approach to derive adsorption rate constants of Langmuir-Freundlich kinetics

A new and simple equation has been presented here for calculation of adsorption and desorption rate constants of Langmuir-Freundlich kinetic equation. The derivation of new equation is on the basis of extension and correction to the geometric method which has been presented by Kuan et al. [Kuan, W.-H., Lo, S.-L., Chang, C.M., Wang, M.K., 2000. A geometric approach to determine adsorption and desorption kinetic constants. Chemosphere 41, 1741-1747] for the kinetics of adsorption/desorption in aqueous solutions. The correction is to consider that the concentration of solute is not constant and changes as adsorption proceeds. The extension is that we applied Langmuir-Freundlich kinetic model instead of Langmuir kinetic model to consider the heterogeneity and therefore it is more applicable to the real systems. For solving Langmuir-Freundlich kinetic model, some geometric methods and also Taylor expansion were used and finally a simple and novel equation was derived (Eq. (20)) for calculation of adsorption rate constant. This new method was named "extended geometric method". The input data of the obtained equation can be simply derived from initial data of adsorption kinetics. Finally the adsorption of methyl orange onto granular activated carbon was carried out at dynamic and equilibrium conditions and the capabilities of extended geometric method were examined by the experimental data.     

ANAEROBIC TREATMENT OF ATRAZINE BEARING WASTEWATER

Performance of mixed microbial anaerobic culture in treating synthetic wastewater with high Chemical Oxygen Demand (COD) and varying atrazine concentration was studied. Performance of hybrid reactors with wood charcoal as adsorbent, with a dose of 10 g/l and 40 g/l, along with the microbial mass was also studied. All the reactors were operated in sequential mode with Hydraulic Retention Time (HRT) of 5 days. In all the cases, COD removal after 5 days was found to be above 81%. Initial COD was above 1000 mg/l. From a hybrid reactor COD removal after 2 days was observed to be 90%. Atrazine reduction after 5 days by microbial mass alone was 43.8%, 40% and 33.2% with an initial concentration of 0.5, 1.0 and 2.0 mg/l respectively. MLSS on all the cases were almost same. Increasing MLSS concentration by about 2 fold did not increase the atrazine removal efficiency significantly. Maximum atrazine removal was observed to be 64% from the hybrid reactor with 10 g/l of wood charcoal and 69.4% from the reactor with 40 g/l of wood charcoal. Atrazine removal from the hybrid reactors after 15 days were observed to be 35.7% and 38.7%, which showed that the higher dose of wood charcoal in hybrid reactor did not improve the atrazine removal efficiency significantly. Specific methanogenic activity test showed no inhibitory effect of atrazine on methane producing bacteria. The performance of anaerobic microorganisms in removing atrazine with no external carbon source and inorganic nitrogen source was studied in batch mode. With an initial concentration of 1.0 mg/l, reduction of atrazine by the anaerobic microorganisms in absence of external carbon source after 35 days was observed to be 61.8% where as in absence of external carbon and inorganic nitrogen source the reduction was only 44.2% after 150 days. Volatilization loss of atrazine was observed to be insignificant.     

Anaerobic treatment of atrazine bearing wastewater.

Performance of mixed microbial anaerobic culture in treating synthetic waste-water with high Chemical Oxygen Demand (COD) and varying atrazine concentration was studied. Performance of hybrid reactors with wood charcoal as adsorbent, with a dose of 10 g/l and 40 g/l, along with the microbial mass was also studied. All the reactors were operated in sequential mode with Hydraulic Retention Time (HRT) of 5 days. In all the cases, COD removal after 5 days was found to be above 81%. Initial COD was above 1,000 mg/l. From a hybrid reactor COD removal after 2 days was observed to be 90%. Atrazine reduction after 5 days by microbial mass alone was 43.8%, 40% and 33.2% with an initial concentration of 0.5, 1.0 and 2.0 mg/l respectively. MLSS on all the cases were almost same. Increasing MLSS concentration by about 2 fold did not increase the atrazine removal efficiency significantly. Maximum atrazine removal was observed to be 64% from the hybrid reactor with 10 g/l of wood charcoal and 69.4% from the reactor with 40 g/l of wood charcoal. Atrazine removal from the hybrid reactors after 15 days were observed to be 35.7% and 38.7%, which showed that the higher dose of wood charcoal in hybrid reactor did not improve the atrazine removal efficiency significantly. Specific methanogenic activity test showed no inhibitory effect of atrazine on methane producing bacteria. The performance of anaerobic microorganisms in removing atrazine with no external carbon source and inorganic nitrogen source was studied in batch mode. With an initial concentration of 1.0 mg/l, reduction of atrazine by the anaerobic microorganisms in absence of external carbon source after 35 days was observed to be 61.8% where as in absence of external carbon and inorganic nitrogen source the reduction was only 44.2% after 150 days. Volatilization loss of atrazine was observed to be insignificant.     

Adsorption kinetics of herbicide paraquat from aqueous solution onto activated bleaching earth

In the present study, the activated bleaching earth was used as adsorbent for the herbicide paraquat adsorption in a batch adsorber. The rate of adsorption has been investigated under the controlled process parameters like agitation speed, initial paraquat concentration, adsorbent dosage and temperature. A batch kinetic model, based on the assumption of a pseudo-second order mechanism, has been tested to predict the rate constant of adsorption, equilibrium adsorption capacity, time of half-adsorption, and equilibrium concentration by the fittings of the experimental data. The results of the kinetic studies show that the adsorption process can be well described with the pseudo-second order equation. Based on the isotherm data obtained from the fittings of the adsorption kinetics, Freundlich model appears to fit the adsorption better than Langmuir model. In addition, the effective diffusion coefficient has also been estimated based on the restrictive diffusion model.     

天然及CaCl_2改性沸石对四环素的吸附

通过静态吸附实验研究了水中四环素在天然和CaCl2改性沸石上的吸附行为及机制。实验表明,天然沸石对四环素具有吸附能力,CaCl2改性可以提高沸石对四环素的吸附能力。天然和改性沸石对四环素的吸附符合拟二级动力学模型,颗粒内扩散不是吸附过程的主要控制步骤。Freundlich和Dubinin-Radushkevich（D-R）等温吸附模型可以较好地描述实验所用2种沸石对四环素的吸附行为,D-R等温方程拟合结果显示吸附过程包含离子交换作用。通过对天然和改性沸石吸附四环素前后溶液中主要阳离子浓度变化分析证实了该吸附过程包含离子交换作用。实验研究了pH值变化对沸石吸附四环素的影响,当pH=3～5时,天然和改性沸石对四环素的吸附量均随pH值的增加而急剧下降,而pH=5～10时,天然和改性沸石对四环素的吸附量变化均不明显,推测可能是离子交换作用和化学沉淀吸附作用所致。另外,实验还初步探索了溶液离子强度对沸石吸附四环素的影响情况,随着溶液中Na＋和Ca2＋离子强度的增加,吸附量先急剧降低随后趋向平稳,进一步说明了沸石对四环素的吸附过程不是由单一机制控制的。     

天然及CaCl2改性沸石对四环素的吸附

通过静态吸附实验研究了水中四环素在天然和CaCl2改性沸石上的吸附行为及机制。实验表明,天然沸石对四环素具有吸附能力,CaCl2改性可以提高沸石对四环素的吸附能力。天然和改性沸石对四环素的吸附符合拟二级动力学模型,颗粒内扩散不是吸附过程的主要控制步骤。Freundlich和Dubinin-Radushkevich(D-R)等温吸附模型可以较好地描述实验所用2种沸石对四环素的吸附行为,D-R等温方程拟合结果显示吸附过程包含离子交换作用。通过对天然和改性沸石吸附四环素前后溶液中主要阳离子浓度变化分析证实了该吸附过程包含离子交换作用。实验研究了pH值变化对沸石吸附四环素的影响,当pH=3～5时,天然和改性沸石对四环素的吸附量均随pH值的增加而急剧下降,而pH=5～10时,天然和改性沸石对四环素的吸附量变化均不明显,推测可能是离子交换作用和化学沉淀吸附作用所致。另外,实验还初步探索了溶液离子强度对沸石吸附四环素的影响情况,随着溶液中Na+和Ca2+离子强度的增加,吸附量先急剧降低随后趋向平稳,进一步说明了沸石对四环素的吸附过程不是由单一机制控制的。     

Complete dechlorination of endosulfan and lindane using Mg0/Pd(+4) bimetallic system

A Mg0/Pd(+4) bimetallic system was evaluated to dechlorinate endosulfan and lindane in the aqueous phase. Studies were conducted with endosulfan and lindane separately, with or without acid in a 1:1 (v/v) water:acetone phase. In the absence of any acid, higher degradation of endosulfan and lindane was observed using Mg0/Pd(+4) doses of 10/0.5 and 4/0.1 mg/mL, respectively. Acetone plays an important role in facilitating the dechlorination reaction by increasing the solubilities of pesticides. Dechlorination kinetics for endosulfan and lindane (30 and 50 mg/L [30 and 50 ppm] concentration of each pesticide) were conducted with varying Mg0/Pd(+4) doses, and the time-course profiles were well-fitted into exponential curves. The optimum observed rate constants (k(obs)) for endosulfan and lindane were obtained with Mg0/Pd(+4) doses of 5/0.5 and 4/0.1 mg/mL, respectively. Gas chromatography-mass spectrometry analyses revealed that endosulfan and lindane were dechlorinated completely into their hydrocarbon skeletons-Bicyclo [2,2,1] hepta 2-5 diene and benzene, respectively.     

Biosorption of Pb(II) by biomass of KC-2: kinetic, equilibrium and characteristic studies

Performance and characteristics of biosorption of Pb(II) had been studied in a batch system using the fungal strain biomass, KC-2. The biosorption performance was investigated by analysing the effects of such factors as the initial pH, initial Pb(II) concentration, and contact time at 303 K. The maximum Pb(II) adsorption was obtained at pH 5.0. The experimental data were described by the pseudo first-order, pseudo second-order and intraparticle diffusion kinetic models, and were closely followed the pseudo second-order kinetic model. The equilibrium experimental data were well fitted to Langmuir model and the maximum biosorption capacity was 84.03 mg g(-1). The adsorption mechanism was examined by FTIR, SEM and EDAX analysis. Results indicated that carboxylic, hydroxyl and amine groups were involved in the biosorption and ion exchange mechanism existed.     

Kinetics of phenanthrene desorption from activated carbons to water

We determined the kinetics of phenanthrene desorption from three activated carbons to water using Tenax beads as an infinite sink for organic compounds in water. Desorption kinetic data very well fitted a biphasic kinetic model based on the presence of two different adsorption sites, viz. low-energy sites and high-energy sites. Rate constants for desorption to water from these two types of sites in the three activated carbons did not reveal a relation with activated carbon grain size. These rate constants were comparable to those for desorption of various organic compounds from hard carbon in various sediments.     

臭氧氧化法处理焦化废水生化出水的反应动力学

对臭氧氧化去除焦化废水生化出水COD的反应动力学及其影响因素进行了实验研究，结果表明，在臭氧投加量为8．50mg／min，反应温度为20＇E和初始pH为10．61条件下，对COD的降解符合表观一级反应动力学模型，其相关系数R。=0．9991，表观反应速率常数k。。=1．01×10^-3s-1。该条件下，臭氧氧化对COD的降解主要来源于高活性羟基自由基的强氧化作用。在不同的臭氧投加量（4．25～12．75mg／min）、不同的反应温度（10～40℃）和不同的初始pH（3．76～12．53）下，COD的降解也同样遵循一级反应动力学规律。随着臭氧投加量的增大，COD降解的表观反应速率常数从（0．554×10^-3）s-1增加到（1．06×10＆-3）s-1；随着反应温度的升高，表观反应速率常数从（0．427×10^-3）s-1增加到（1．40×10-3）s-1，温度越高反应速率提高的幅度却越小；在初始pH3．76～10．61范围内，表观反应速率常数从（0．218×10^-3）s-1增加到（1．01×10^-3）s-1，在初始pH为12．53时表观反应速率常数下降到（0．857×10^-3）s-1。