Biotransformation and antioxidant response in Ceratophyllum demersum experimentally exposed to 1,2- and 1,4-dichlorobenzene

We report the effects of 1,2- and 1,4-dichlorobenzene (1,2-DCB and 1,4-DCB) on the aquatic macrophyte Ceratophyllum demersum. We evaluated the response of the antioxidant system through the assay of glutathione reductase (GR), guaiacol peroxidase (POD) and glutathione peroxidase (GPx). Additionally, the effect of DCBs on the detoxication system by measuring the activity of glutathione-S-transferase (GST) was evaluated.

C. demersum showed elevated GST activities when exposed to 10 and 20 mg l⁻¹ 1,2-DCB, and at 10 mg l⁻¹ for 1,4-DCB. These results show that glutathione conjugation take place at relatively high concentrations of both isomers. Significantly increased activities of POD were also detected in C. demersum exposed to concentrations above 5 mg l⁻¹ of the corresponding isomer.

The GR activity was enhanced in plants exposed to 1,2-DCB (5 mg l⁻¹) and 1,4-DCB (10 mg l⁻¹). GPx was also significantly increased in exposures to the corresponding isomer, each at a concentration of 10 mg l⁻¹. However, plants exposed to low doses of 1,4-DCB (1 mg l⁻¹) showed significantly decreased activities of both enzymes GR and GPx.

Consequently, it is clear that the exposure of the aquatic macrophyte C. demersum to DCBs is able to cause an activation of the antioxidant system, showing an isomer specific pattern, which suggests that the defence system of this plant is playing an important role in scavenging ROS, helping to protect the organism against adverse oxidative effects generated by the prooxidant action of the tested xenobiotics. Furthermore, increased GST activities give indirect evidence on the conjugation of either DCBs or the corresponding metabolites during phase II of detoxication, which supports the elimination process of toxic metabolites from cells of C. demersum.     

The use of physiological characteristics for comparison of organic compounds phytotoxicity

The influence of intact (FLT) and photomodified (phFLT) fluoranthene (0.05, 0.5 and 5 μmol l⁻¹) and herbicide Basagran (5, 20, 35 and 50 nmol l⁻¹) on the germination, growth of seedlings and photosynthetic processes in pea plants (Pisum sativum L., cv. Garde) was investigated. The germination was significantly inhibited already by the lowest concentration (0.05 μmol l⁻¹) of FLT and phFLT, while Basagran caused inhibition only in higher concentrations (35 and 50 nmol l⁻¹). The growth of roots was significantly inhibited by higher concentration 5 μmol l⁻¹ of both FLT and phFLT and the shoot of seedlings was significantly influenced only by photomodified form. The length of root and shoot was inhibited already by concentration 5 nmol l⁻¹ of Basagran. Organic compounds applied on chloroplasts suspension influenced primary photochemical processes of photosynthesis. In chlorophyll fluorescence parameters, the significant increase of F₀ values and the decrease of F_V/F_M and Φ_II values by application of FLT (0.5 and 5 μmol l⁻¹) and phFLT (0.05, 0.5 and 5 μmol l⁻¹) was recorded. The maximum capacity of PSII (F_V/F_M) was influenced by the highest (50 nmol l⁻¹) and the effective quantum yield of PSII (Φ_II) already by the lowest (5 nmol l⁻¹) concentration of Basagran. Hill reaction activity decreased and was significantly inhibited by higher concentration (0.5 and 5 μmol l⁻¹) of FLT and phFLT and already by the lowest concentration (5 nmol l⁻¹) of Basagran.     

Biosorption of cadmium by Myriophyllum spicatum L. and Myriophyllum triphyllum orchard

The aim of this study was to characterize the biological treatment of heavy metal-contaminated water employing Myriophyllum species, namely M. spicatum L. and M. triphyllum. Both species were found to be capable of removing cadmium (Cd) from water; the latter significantly outperformed. Myriophyllum species were treated with 0, 2, 4, 6, 8, 16 mg l⁻¹ cadmium solutions for 24, 48, 72, 96 h, respectively. Cd uptake of both species was the lowest at 2 mg l⁻¹ and the highest at 16 mg l⁻¹. Concentration related cadmium stress on both species exhibit significant difference on pigment levels (8–16 mg l⁻¹). These findings contribute to the fact that submerged aquatic plants can be used for the removal of heavy metals.     

Selective adsorption of phenanthrene dissolved in surfactant solution using activated carbon

Selective adsorption of a hazardous hydrophobic organic compound (HOC) by activated carbon as a means of recovering surfactants after a soil washing process was investigated. As a model system, phenanthrene was selected as a representative HOC and Triton X-100 as a nonionic surfactant. Three activated carbons that differed in size (Darco 20–40 (D20), 12–20 (D12) and 4–12 (D4) mesh sizes) were used in adsorption experiments. Adsorption of surfactant onto activated carbon showed a constant maximum above the critical micelle concentration, which were 0.30, 0.23, 0.15 g g⁻¹ for D20, D12, and D4, respectively. Selectivity for phenanthrene to Triton X-100 was much higher than 1 over a wide range of activated carbon doses (0–6 g l⁻¹) and initial phenanthrene concentrations (10–110 mg l⁻¹). Selectivity generally increased with decreasing particle size, increasing activated carbon dose, and decreasing initial concentration of phenanthrene. The highest selectivity was 74.9, 57.3, and 38.3 for D20, D12, and D4, respectively, at the initial conditions of 10 mg l⁻¹ phenanthrene, 5 g l⁻¹ Triton X-100 and 1 g l⁻¹ activated carbon. In the case of D20 at the same conditions, 86.5% of the initial phenanthrene was removed by sorption and 93.6% of the initial Triton X-100 remained in the solution following the selective adsorption process. The results suggest that the selective adsorption by activated carbon is a good alternative for surfactant recovery in a soil washing process.     

Evaluating the impacts of some environmentally relevant factors on the availability of bisphenol A with negligible-depletion SPME

The effect of some environmentally relevant factors including salinity, pH, and humic acids on the availability of bisphenol A (BPA) was evaluated by using the negligible-depletion solid-phase microextraction (nd-SPME) biomimetic method. With the variation of salinity (0–500 mM NaCl) and pH (5.0–8.5) of aqueous solutions, the partition coefficients of BPA between the nd-SPME fiber and the aqueous solution varied in the range of log D = 3.55–3.86, which indicates that the salinity and pH can influence the availability of BPA. By using Acros humic acid as model dissolved organic matter (DOM), it was also demonstrated that the environmental factors such as salinity and pH could affect the partitioning of BPA between DOM and aqueous solutions. The determined partition coefficients of BPA between dissolved organic carbon (DOC) and aqueous solutions were in the range of log D_DOC = 4.03–5.60 for Acros humic acid solutions with 1–50 mg l⁻¹ DOC. The influence of salinity and pH on log D_DOC was more significant at low concentration (0–5 mg l⁻¹) of DOC.     

Cold season CH4, CO2 and N2O fluxes from freshwater marshes in northeast China

Cold season (winter and thaw) CH₄, CO₂ and N₂O fluxes from freshwater marshes (47°35′N, 133°31′E, Northeast China) were measured, using the static chamber method. The mean CH₄ and CO₂ fluxes from Carex lasiocarpa (Cl) were 0.5 ± 0.19 and 6.23 ± 1.36 mg C m⁻² h⁻¹, respectively, and those from Deyeuxia angustifoli (Da) were 0.18 ± 0.15 and 5.22 ± 2.48 mg C m⁻² h⁻¹, respectively in winter. There was no significant difference between Cl and Da (p > 0.05). The contributions of winter CH₄ fluxes were about 5.5% and 3% in the Cl and Da, respectively. Marshes are an important potential N₂O sink in winter season in northeast China. During thaw, the CH₄ and CO₂ emissions rapidly increased, 4.5–6 times of winter emissions. Wetland became a source of N₂O. Cold season gases flux from northern wetlands play an important role in the seasonal gas exchange.     

Concentrations of chlorine, bromine and iodine in Japanese rivers

Concentrations of halogens (Cl, Br and I) in 30 Japanese rivers were measured by ion chromatography and inductively coupled plasma mass spectrometry to understand their behavior in the terrestrial environment. Concentrations of Cl, Br and I in each river, obtained at 10 sampling points from the upper stream to the river mouth, tended to increase near the river mouth. The ranges of geometric means of Cl, Br and I in each river were 1.0–19.4 mg l⁻¹, 2.5–67.9 μg l⁻¹, and 0.18–8.34 μg l⁻¹, respectively. To compare halogen behavior, the concentration ratios, Br/Cl and I/Cl, were calculated. The Br/Cl range was (2.3–7.8) × 10⁻³ (geometric mean: 3.74 × 10⁻³), and it was nearly constant except for the Yoneshiro river. It was estimated that 60–80% of total Br in the middle to lower parts of this river was the excess Br. The Br chemical form in all the rivers is generally considered to be Br⁻. The I/Cl ratios had different trends in rivers flowing into the Japan Sea and Pacific Ocean, possibly due to the different geological features in the river catchments.     

Accumulation, speciation and cellular localization of copper in Sesbania drummondii

Growth, accumulation and intracellular speciation and distribution of copper (Cu) in Sesbania drummondii was studied using scanning-electron microscopy (SEM), X-ray absorption near edge structure (XANES) and extended X-ray absorption fine structure (EXAFS). The growth of seedlings was assessed in terms of biomass accumulation. The growth of the seedling was enhanced by 73.5% at a low Cu concentration (50 mg l⁻¹) compared to the control treatment. Additionally, seedling growth was inhibited by 18% at 300 mg l⁻¹ Cu with respect to the control. Copper concentration in roots and shoots was increased with increasing Cu concentration in the growth solution. The accumulation of Cu was found to be higher in roots than in the shoots. At a concentration of 300 mg l⁻¹ Cu, the roots accumulated 27,440 mg Cu kg⁻¹ dry weight (dw) while shoots accumulated 1282 mg Cu kg⁻¹ dw. Seedlings were assessed for photosynthetic activity by measuring chlorophyll a fluorescence parameters: F_v/F_m and F_v/F₀ values. Photosynthetic integrity was not affected by any of the Cu treatments. The X-ray absorption spectroscopic (XAS) studies showed that Cu was predominantly present as Cu(II) in Sesbania tissue. In addition, from the XAS studies it was shown that the Cu exists in a mixture of different coordination states consisting of Cu bound to sugars and small organic acids with some possible precipitated copper oxide. From the EXAFS studies, the coordination of Cu was determined to have four equatorial oxygen(nitrogen) ligands at 1.96 Å and two axial oxygen ligands at 2.31 Å. Scanning-electron microscopy studies revealed the distribution of Cu within the seedlings tissues, predominantly accumulated in the cortical and vascular (xylem) regions of root tissues. In the stem, most of the Cu was found within the xylem tissue. However, the deposition of Cu within the leaf tissues was in the parenchyma. The present study demonstrates the mechanisms employed by S. drummondii for Cu uptake and its biotransformation.     

Toxicity of HC Orange No. 1 to Daphnia magna, zebrafish (Brachydanio rerio) embryos, and goldfish (Carassius auratus)

HC Orange No. 1 (HCO1; 2-nitro-4′-hydroxydiphenylamine) (CAS No. 54381-08-7) is used as a color additive in hair dyes and can be released into aquatic environments in wastewater. In this paper, the effects of HCO1 on aquatic organisms were studied using a battery of toxicological tests. These included measuring immobilization of Daphnia magna, inhibition of zebrafish embryo development, and acute lethality in zebrafish and goldfish, which are different species belonging to different trophic levels. HCO1 was toxic to all of the organisms studied. In our experiments, HCO1 remarkably restrained the mobility of D. magna, which may cause subsequent death. The EC₅₀ value for restrained the mobility of D. magna at 48 h was 1.54 mg HCO1 l⁻¹. In addition, HCO1 showed toxicity in zebrafish and goldfish, where LC₅₀values at 96 h were 4.04 and 5.37 mg l⁻¹, respectively. The results also indicated that HCO1 remarkably retarded the development of zebrafish embryos, which may cause embryo abnormality and even lethality. The most sensitive toxicological endpoint in the development of the embryos was failure to hatch, which had an EC₅₀ of 0.19 mg HCO1 l⁻¹. These results indicated that HCO1 is a potential teratogen to zebrafish embryos. In addition, as HCO1 concentrations increased, the outcomes of each of these toxicity tests changed in a concentration-dependent manner. Together, the results revealed that HCO1 appears to be toxic to multiple different species of aquatic organisms. The EC₅₀ (LC₅₀) values contain sufficient discriminatory power for risk assessment of HCO1 in aquatic environments. Based on the present results, more efficient risk assessment procedures for HCO1 will be designed in the future, integrating more flexible testing methods into the testing schemes that employ only the necessary tools for each case.     

On the performance of Fe and Fe,F doped Ti-Pt/PbO2 electrodes in the electrooxidation of the Blue Reactive 19 dye in simulated textile wastewater

The electrochemical performance of pure Ti–Pt/β-PbO₂ electrodes, or doped with Fe and F (together or separately), in the oxidation of simulated wastewaters containing the Blue Reactive 19 dye (BR-19), using a filter-press reactor, was investigated and then compared with that of a boron-doped diamond electrode supported on a niobium substrate (Nb/BDD). The electrooxidation of the dye simulated wastewater (volume of 0.1 l, with a BR-19 initial concentration of 25 mg l⁻¹) was carried out under the following conditions: current density of 50 mA cm⁻², volume flow rate of 2.4 l h⁻¹, temperature of 25 °C and electrode area of 5 cm². The performances of the electrodes in the dye decolorization were quite similar, achieving 100% decolorization, and in some cases 90% decolorization was achieved by applying only ca. 0.3 A h l⁻¹ (8 min of electrolysis). The reduction of the simulated wastewater organic load, monitored by its total organic carbon content (TOC), was greater for the Ti–Pt/β-PbO₂–Fe,F electrode obtained from an electrodeposition bath containing 1 mM Fe³⁺ and 30 mM F⁻. In this case, after 2 h of electrolysis the obtained TOC reduction was 95%, while for the pure β-PbO₂ and the Nb/BDD electrodes the reductions were 84% and 82%, respectively.     

Screening 31 endocrine-disrupting pesticides in water and surface sediment samples from Beijing Guanting reservoir

For screening 31 potential or suspected endocrine-disrupting pesticides in water and surface sediments, a multiresidue analysis method based on gas chromatography with electron capture detection (GC/ECD) was developed. Solid phase extraction (SPE) technology with Oasis^® HLB cartridge was also applied in sample extraction. The relevant mean recoveries were 70–103% and 71–103% for water and sediment, respectively. Relative standard deviations (RSD) are 2.0–7.0%, 4.0–8.0% for water and sediment, respectively. Thirty one pesticides (-HCH, β-HCH, γ-HCH, δ-HCH, hexachlorobenzene (HCB), aldrin, heptachlor, endosulfan I & II, p,p′-DDD, o,p′-DDT, p,p′-DDT, p,p′-DDE, endrin aldehyde, endosulfan sulphate, methoxychlor, hepachlor epoxide, -chlordane, γ-chlordane, dieldrin, endrin, dicofol, acetochlor, alachlor, metolachlor, chlorpyriphos, nitrofen, trifluralin, cypermethrin, fenvalerate, deltamethrin) in water and surface sediment samples from Beijing Guanting reservoir were analyzed. Concentrations of pesticides ranged from 7.59 to 36.0 ng g⁻¹ on a dry wt. basis for sediment samples, from 279.3 to 2740 ng l⁻¹ for pore waters and from 48.8 to 890 ng l⁻¹ for water samples, respectively, with a mean concentration of 10.7 ng g⁻¹ in sediment, 735 ng l⁻¹ in pore water and 295 ng l⁻¹ in water, respectively. The data obtained provides information on the levels and sources of endocrine-disrupting pesticides in Guanting reservoir. These results underscore the need to improved environmental protection measures in order to reduce the exposure of the population and aquatic biota to these endocrine-disrupting compounds.     

Leaching and degradation of 21 pesticides in a full-scale model biobed

Filling and cleaning of pesticide sprayers presents a potential risk of pollution of soil and water. Three different solutions for handling sprayers have been suggested: Filling and cleaning in the field, filling and cleaning on hard surfaces with collection of the waste water, and filling and cleaning on a biobed, which is an excavation lined with clay and filled with a mixture of chopped straw, sphagnum and soil with turf on top, and with increased sorption capacity and microbial activity for degradation of the pesticides. In the present study the degradation and leaching of 21 pesticides (5 g of each) was followed in an established full-scale model biobed. Percolate was collected and analysed for pesticide residues, and the biobed material was sampled at three different depths and analysed by liquid chromatography double mass spectrometry (LC-MSMS). During the total study period of 563 days, no traces of 10 out of 21 applied pesticides were detected in the percolate (detection limits between 0.02 and 0.9 μg l⁻¹) and three pesticides were only detected once and at concentrations below 2 μg l⁻¹. During the first 198 days before second application, 14% of the applied herbicide bentazone was detected in the leachate with maximum and mean concentrations of 445 and 172 μg l⁻¹, respectively. About 2% of the initial mecoprop and fluazifop dose was detected in the percolate, with mean concentrations of 23 μg l⁻¹, while MCPA and dimethoate had mean concentrations of 3.5 and 4.7 μg l⁻¹, respectively. Leachate concentrations for the remaining pesticides were generally below the detection limit (0.02–0.9 μg l⁻¹, below 1% of applied). Sorption studies of five pesticides showed that compounds with a low K_d value appeared in the leachate. After 169 days, all pesticides in the biobed profile were degraded to a level below 50% of the calculated initial dose. Pesticides with K_oc values above 100 were primarily found in the uppermost 10 cm and degraded slowest due to the low bioavailability. The 11 most degradable pesticides were all degraded such that less than 3% remained in the biobed after 169 days.

Following second pesticide application of the biobed, leachate was sampled 215 and 365 days after the treatment. This showed the same pesticides to be leached out and at concentrations comparable to those of the first treatment. The same pesticides as after the first treatment were retained in the biobed.     

Cadmium accumulation and Cd-binding proteins in marine invertebrates--a radiotracer study

Tissue and subcellular accumulation of cadmium were studied in different tissues of three marine invertebrates (blue mussel Mytilus edulis, the tunicate Ciona intestinalis and the sea star Asterias rubens) using radioactive ¹⁰⁹Cd as a tracer. The organisms were exposed to 0.05, 2 and 50 μg Cd l⁻¹ for 21 days. Quantitative data were obtained by dissecting, weighing and subsequently measuring radioactivity in organs and tissues. Differences between each exposure and each tissue with regard to the amount of radioactivity and metallothionein (MT) content were evaluated. Obvious interspecies differences in Cd accumulation were observed, as well as differences between tissues of the three species. The highest concentrations of Cd in all exposure treatments were found in the hepatopancreas of M. edulis and body wall of A. rubens. Taking all treatments into account, Cd accumulation in the tunic of C. intestinalis was high compared to other tissues from this species. Over 60% of Cd was present in the S50 fraction in all treatments in all three species. Metallothionein levels were increased at the highest Cd-exposure in all species and tissues, except in branchial pharynx of C. intestinalis where the highest MT level was reached following exposure to 2 μg Cd l⁻¹. The most surprising finding was that even the lowest Cd exposure concentration (0.05 μg Cd l⁻¹) caused MT induction in pyloric caeca of A. rubens, but there was no dose-dependent increase in MT at higher exposure levels.     

UV-H2O2 based AOP and its integration with biological activated carbon treatment for DBP reduction in drinking water

The presence of disinfection byproducts (DBPs) such as trihalomethanes (THMs) and haloacetic acids (HAAs) in drinking water is of great concern due to their adverse effects on human health. Emerging regulation limiting the concentration of DBPs in drinking water has increased demands for technologies and processes which reduce the formation of DBPs in drinking water. In this study, UV-H₂O₂ based advance oxidation process (AOP) was used to treat raw surface water. Experiments were conducted using low pressure mercury vapor UV lamps in collimated beam and flow-through annular photoreactors. The effect of UV fluence (0–3500 mJ cm⁻²) and hydrogen peroxide concentration (0–23 mg l⁻¹) in reducing the concentration of THMs and HAAs was examined. The UV-H₂O₂ AOP was then coupled with a downstream biological activated carbon (BAC) treatment to assess the synergetic benefits of combining the two treatments. It was observed that UV-H₂O₂ AOP was only effective at reducing DBPs at UV fluences of more than 1000 mJ cm⁻²and initial H₂O₂ concentrations of about or greater than 23 mg l⁻¹. However, the combined AOP–BAC treatment showed significant reductions of 43%, 52%, and 59% relative to untreated raw water for DBPs, TOC, and UV₂₅₄, respectively.     

Combined biological and photocatalytic treatment for the mineralization of phenol in water

Phenol is degraded by biological treatment, however mineralization requires long time. To decrease the time and operational cost necessary for the mineralization of phenol, an optimum operation condition of the combined biological–photocatalytical treatment was investigated. The mineralization of phenol (50 mg l⁻¹) was conducted in a flow-type biomembrane tank combined with a batch-type TiO₂-suspended photocatalytic reactor. Phenol was degraded biologically to the concentration of 6.8 mg l⁻¹, an effective concentration for further photocatalytic treatment. After the biological treatment, the biotreated phenol was treated photocatalytically to complete the mineralization of phenol. The combined treatment shortened the mineralization time compared to the biological treatment and electric cost compared to the photocatalytic treatment only. The combined treatment may be suitable for a short-time mineralization of phenol in wastewater.     

Sequential photochemical-biological degradation of chlorophenols

UV/TiO₂/H₂O₂, UV/TiO₂ and UV/H₂O₂ were compared as pre-treatment processes for the detoxification of mixtures of 4-chlorophenol (4CP), 2,4-dichlorophenol (DCP), 2,4,6-trichlorophenol (TCP) and pentachlorophenol (PCP) prior to their biological treatment. When each chlorophenol was initially supplied at 50 mg l⁻¹, UV/TiO₂/H₂O₂ treatment supported the highest pollutant removal, COD removal, and dechlorination efficiencies followed by UV/TiO₂ and UV/H₂O₂. The remaining toxicity to Lipedium sativum was similar after all pre-treatments. Chlorophenol photodegradation was always well described by a first order model kinetic (r² > 0.94) and the shortest 4CP, DCP, TCP and PCP half-lives of 8.7, 7.1, 4.5 and 3.3 h, respectively, were achieved during UV/TiO₂/H₂O₂ treatment. No pollutant removal was observed in the controls conducted with H₂O₂ or TiO₂ only. Inoculation of all the photochemically pre-treated mixtures with activated sludge microflora was followed by complete removal of the remaining pollutants. Combined UV/TiO₂/H₂O₂-biological supported the highest detoxification, dechlorination (99%) and COD removal (88%) efficiencies. Similar results were achieved when each chlorophenol was supplied at 100 mg l⁻¹. COD and Cl mass balances indicated UV, UV/H₂O₂, and UV/TiO₂ treatments lead to the formation of recalcitrant photoproducts, some of which were chlorinated.     

Arsenic removal from water employing heterogeneous photocatalysis with TiO2 immobilized in PET bottles

Arsenic oxidation (As(III) to As(V)) and As(V) removal from water were assessed by using TiO₂ immobilized in PET (polyethylene terephthalate) bottles in the presence of natural sunlight and iron salts. The effect of many parameters was sequentially studied: TiO₂ concentration of the coating solution, Fe(II) concentration, pH, solar irradiation time; dissolved organic carbon concentration. The final conditions (TiO₂ concentration of the coating solution: 10%; Fe(II): 7.0 mg l⁻¹; solar exposure time: 120 min) were applied to natural water samples spiked with 500 μg l⁻¹ As(III) in order to verify the influence of natural water matrix. After treatment, As(III) and total As concentrations were lower than the limit of quantitation (2 μg l⁻¹) of the voltammetric method used, showing a removal over 99%, and giving evidence that As(III) was effectively oxidized to As(V). The results obtained demonstrated that TiO₂ can be easily immobilized on a PET surface in order to perform As(III) oxidation in water and that this TiO₂ immobilization, combined with coprecipitation of arsenic on Fe(III) hydroxides(oxides) could be an efficient way for inorganic arsenic removal from groundwaters.     

Effects of cadmium and zinc on oxygen consumption, ammonium excretion, and osmoregulation of white shrimp (Litopenaeus vannamei)

White shrimp, Litopenaeus vannamei, a globally important cultured prawn species, is an ideal animal for studying the impairment caused by the effects of heavy metals that are often detected in coastal areas. The main purpose of the present study was to detect the acute toxicity of Cd and Zn to L. vannamei, and to investigate their effects on gill functions, which have not been carried out in this species before, hoping to obtain some important significance. First of all, we examined the acute toxicity of cadmium (Cd) and zinc (Zn) to L. vannamei and obtained 24-, 48-, 72-, and 96-h medium lethal concentration (LC₅₀) values of 2.58, 1.30, 1.14, and 1.07 mg Cd l⁻¹ and 3.98, 2.14, 1.75, and 1.35 mg Zn l⁻¹, respectively. Furthermore, we also found that exposure of shrimp to Cd or Zn caused an inhibition in oxygen consumption of 91.3% and 75.9% lower than that of the control. However, after separate exposure to Cd or Zn, elevations in ammonium excretion were obtained, which were 153.7% and 144.1%, respectively, higher than the control. It is most likely that elevations in ammonium excretion were related to decreased osmotic pressure of shrimp blood. Finally, the distribution of Cd and Zn within gills was also determined.     

Direct measurement of denitrification activity in a Gulf coast freshwater marsh receiving diverted Mississippi River water

Wetland loss along the Louisiana Gulf coast and excessive nitrate loading into the Gulf of Mexico are interrelated environmental problems. Nitrate removal by soil denitrification activity was studied in a ponded freshwater marsh receiving diverted Mississippi River water for the purpose of reversing or slowing wetland loss. Labeled ¹⁵N-nitrate was applied at 3.8 g N m⁻² into four replicate study plots after removing above ground vegetation. Nitrogen gas (N₂) and nitrous oxide (N₂O) emissions from the plots were determined by isotope ratio mass spectrometry (IRMS). Nitrous oxide emissions were also compared with the results determined by gas chromatograph (GC). Results showed that it took 2 weeks to remove the added nitrate with N₂O emission occurring over a period of 4 d. The apparent denitrification dynamics were assumed to follow the Michaelis–Menten equation. The maximum denitrification rate and K_m value were determined as 12.6 mg N m ⁻² h⁻¹, and 6.5 mg N l⁻¹, respectively. Therefore the maximum capacity for nitrate removal by the marsh soil would be equivalent to 110 g N m⁻² yr⁻¹, with more than 30% of nitrogen gas evolved as N₂O. For typical nitrate concentrations in Mississippi River water of about 1 mg N l⁻¹, nitrate would be removed at a rate of 14.7 g N m⁻² yr⁻¹ with N₂O emission about 1.5%. A denitrification dynamic model showed that the efficiency of nitrate removal would largely depend on the water discharge rate into the ponded wetland. Higher discharge rate will result in less retention time for the water in the marsh where nitrate is denitrified.     

Antimony content of macrofungi from clean and polluted areas

Species of macrofungi (mushrooms) were collected from clean areas and analyzed for their antimony content. These were compared to species collected from extremely polluted areas in the vicinity of a lead smelter and on mine and slag dumps. Antimony content was determined using long-term instrumental neutron activation analysis (INAA). Ectomycorrhizal and terrestrial saprobic macrofungi were examined. Antimony content of macrofungi from the clean areas was mostly less than 100 μg kg⁻¹ (dry mass). The highest concentrations (units of mg kg⁻¹) were found in various species of the ectomycorrhizal genera Chalciporus and Suillus. Antimony contents of macrofungi growing in the polluted areas were considerably higher. The highest content was found in a single collection of Chalciporus piperatus (1423 mg kg⁻¹).