发展循环经济 防治重金属污染——访中国电子工程设计院循环经济技术研究所所长杨敬增

据有关媒体报道,自2009年以来,我国连续发生了30多起特大重金属污染事件,中国重金属污染正由大气、水体向土壤污染转移,土地污染进入多发期。重金属污染对人的身心健康构成了重大威胁。然而,重金属废弃物又是放错地方的宝贵资源,在加强污染治理的同时,如何按照循环经济的理念对重金属废弃物进行再利用,成为重金属污染综合治理的课题之一。为了了解重金属废弃物的资源化情况,本刊对中国电子工程设计院循环经济研究所所长杨敬增进行专访。     

重金属污染土壤生物毒性的发光菌法测定及评价

向土壤中人为投加重金属污染物,制备了重金属含量不同的一系列污染土壤,对土壤重金属浸提条件进行了探究,并应用明亮发光杆菌T3（Photobacterium phosphoreum T3）对单一Cu、Cd和Pb污染及Cu-Cd和Cu-Pb复合重金属污染土壤的生物毒性进行了测定。实验结果表明,土壤重金属的最佳浸提剂为0.1 mol/L HCl溶液,最佳浸提时间为2.0 h。在单一重金属污染条件下：Cu表现出低浓度促进生长、高浓度抑制生长的双重生物效应,而Cd和Pb则表现出浓度与生物毒性的正相关性;3种重金属污染土壤的毒性强弱顺序为Cd>Pb>Cu。在复合重金属污染条件下,由于重金属之间的相互作用,污染土壤的生物毒性增强。     

重金属污染土壤的修复技术研究进展及发展前景

目前,我国重金属污染呈现出长期积累和近期集中爆发、历史遗留问题和新出现问题相交织的特点,重金属污染在环境中存在多、形态多,整治重金属污染是一项长期、复杂、艰巨的任务.重金属污染物极难降解,尤其是存在于水和土壤中的重金属兼具富集性,是不可逆转的.重点阐述了重金属污染土壤的修复技术研究进展及发展前景.     

浙江省重金属污染物排放现状分析

总结了浙江省"十二五"期间重金属污染防治工作经验及全省重金属排放情况,得出2013年铬排放量所占比例最大。分析了重金属污染防治过程中存在的问题,提出了建议措施,为后续重金属污染防治工作奠定坚实基础。     

重金属镉污染下石榴的耐性特征及重金属富集研究

土壤是人类生产和生活中不可或缺的生存资源,但随着工业革命和科学技术的快速发展,重金属污染也越来越难以控制和消除。重金属进入土壤,会对其中的动植物造成严重的损害,甚至可能污染地下水,造成严重的经济损失。为了人类的健康和环境可持续发展,重金属污染的修复和治理已势在必行。通过对重金属镉污染下石榴的耐性特征及重金属富集研究,探究重金属对植物的影响机制。     

环境重金属污染的生物指示作用

针对指示生物在环境重金属污染监测、评价与防治中所起的指示作用与研究现状，介绍了有关指示生物的基本理论，分析了常见指示生物对土壤、水和大气环境重金属污染的指示作用。提出了选择合适的指示生物是发挥其对重金属污染指示作用的关键。最后，提出了指示生物对环境重金属污染指示作用的局限性及对策。     

电厂燃煤过程中重金属污染及其控制技术研究

综述了燃煤重金属污染问题的严重性和污染途径，对燃煤重金属的种类和危害进行了论述，并重点阐述了国内外采取的控制措施，同时还指出了燃煤重金属污染研究中存在的问题及今后的研究方向。     

土壤重金属污染治理存在的问题及应对措施

随着当前社会各界逐渐提高环保相关意识,土壤重金属污染问题受关注程度越来越高。土壤污染除了会影响整个土壤圈层之外,还会对诸如空气、水体等产生一定程度的污染。土壤重金属污染所涉及的重金属元素主要为Hg,Cd,Pb,Cr,As,Zn,Cu,Ni等。当前治理土壤重金属污染,不仅能够有效提高农产品安全,还能够保证人类的健康发展。分析土壤重金属污染的成因及其对农作物和人类所产生的影响,并尝试从物理、化学、生物等多个角度共同开展修复工作,以求可以为我国受污染土壤开展治理工作提供经验借鉴。     

万山汞矿区土壤重金属污染特征及来源解析

以万山汞矿区土壤为研究对象,采用电感耦合等离子体质谱仪和原子荧光光谱仪测定土壤中的重金属含量,分别运用内梅罗综合污染指数（NPI）法和潜在生态风险指数（RI）法评价土壤重金属污染和潜在生态风险,并应用相关性分析、主成分分析和聚类分析对土壤重金属来源进行分析。结果表明：土壤Hg、Cd、As、Pb、Cu、Ni和Zn出现不同程度累积,分别达贵州省背景值的263.61、2.31、1.28、2.11、1.70、1.01和3.52倍;土壤重金属平均NPI为188.00,属于严重污染水平,Hg是主要污染因子;土壤重金属平均RI为10 655.70,属于极强潜在生态风险水平,Hg是主要潜在生态风险因子;土壤中Cu、Ni、Cr主要源于自然活动,As、Pb、Zn主要源于燃煤和交通运输污染,Cd主要源于农业污染,Hg主要源于汞冶炼污染。     

利用废纸箱研制出新型重金属修复剂

正记者日前从中科院合肥物质科学研究院获悉,该院技术生物所吴正岩研究员课题组近日在重金属污染修复方面取得进展,科研人员利用废弃纸箱研制出一种高效去除水体中重金属的纳米复合材料,为重金属污染修复和废弃纸箱循环利用提供了新思路。相关成果已被美国化学会期刊接收发     

水体重金属-有机物复合污染的协同处理技术研究进展

重金属离子与有机污染物可以通过多种方式共同存在于水体环境中,形成复合污染。本文在简述重金属-有机物复合污染的来源和相互作用机理的基础上,详细阐述了现有的协同处理技术的研究和应用现状,分析了各种技术的原理、效果、优势以及缺陷,为进一步开发新型协同处理技术提供参考,对水体污染的防治具有积极意义。     

金属全生命周期风险防控管理对策

通过解析《关于汞的水俣公约》的管理对策及措施,分析了我国重金属污染防治管理中存在的问题及开展对策研究的必要性。以重金属污染防治管理战略、基础研究、政策法规和标准体系建设、信息管理体系建设、技术研发和推广、监督管理能力建设、协调机制建设等领域为切入点,分析得出了各领域存在的关键问题并提出了对策建议。     

Temporary stabilization of air pollution control residues using carbonation

Carbonation presents a good prospect for stabilizing alkaline waste materials. The risk of metal leaching from carbonated waste was investigated in the present study; in particular, the effect of the carbonation process and leachate pH on the leaching toxicity of the alkaline air pollution control (APC) residues from municipal solid waste incinerator was evaluated. The pH varying test was conducted to characterize the leaching characteristics of the raw and carbonated residue over a broad range of pH. Partial least square modeling and thermodynamic modeling using Visual MINTEQ were applied to highlight the significant process parameters that controlled metal leaching from the carbonated residue. By lowering the pH to 8-11, the carbonation process reduced markedly the leaching toxicity of the alkaline APC residue; however, the treated APC residue showed similar potential risk of heavy metal release as the raw ash when subjected to an acid shock. The carbonated waste could, thereby, not be disposed of safely. Nonetheless, carbonation could be applied as a temporary stabilization process for heavy metals in APC residues in order to reduce the leaching risk during its transportation and storage before final disposal.     

Metal releases from a municipal solid waste incineration air pollution control residue mixed with compost

The influence of 10 wt.% mature compost was tested on the heavy metal leachate emissions from a calcium-rich municipal solid waste incineration air pollution control residue (MSWI APC). Apart from elongated columns (500 and 1250 mm), an otherwise norm compliant European percolation test setup was used. More than 99% of the metals Al, As, Cd, Cr, Cu, Fe and Ni were left in the APC residue after leaching to a liquid-to-solid ratio (L/S) of 10. Apparent short-term effects of elevated leachate DOC concentrations on heavy metal releases were not detected. Zn and Pb leachate concentrations were one order of magnitude lower for L/S 5 and 10 from the pure APC residue column, which suggests a possible long-term effect of compost on the release of these elements. Prolonging the contact time between the pore water and the material resulted in elevated leachate concentrations at L/S 0.1 to L/S 1 by a factor of 2. Only Cr and Pb concentrations were at their maxima in the first leachates at L/S 0.1. Equilibrium speciation modelling with the PHREEQC code suggested portlandite (Ca(OH)2) to control Ca solubility and pH.     

Characteristics of ashes from different locations at the MSW incinerator equipped with various air pollution control devices

The characteristics of ashes from different locations at a municipal solid waste incinerator (MSWI) equipped with a water spray tower (WST) as a cooling system, and a spray dryer adsorber (SDA), a bag filter (BF) and a selective catalytic reactor (SCR) as air pollution control devices (APCD) was investigated to provide the basic data for further treatment of ashes. A commercial MSWI with a capacity of 100 tons per day was selected. Ash was sampled from different locations during the normal operation of the MSWI and was analyzed to obtain chemical composition, basicity, metal contents and leaching behavior of heavy metals. Basicity and pH of ash showed a broad range between 0.08-9.07 and 3.5-12.3, respectively. Some major inorganics in ash were identified and could affect the basicity. This could be one of the factors to determine further treatment means. Partitioning of hazardous heavy metals such as Pb, Cu, Cr, Hg and Cd was investigated. Large portions of Hg and Cd were emitted from the furnace while over 90% of Pb, Cu and Cr remained in bottom ash. However 54% of Hg was captured by WST and 41% by SDA/BF and 3.6% was emitted through the stack, while 81.5% of Cd was captured by SDA/BF. From the analysis data of various metal contents in ash and leach analysis, such capturing of metal was confirmed and some heavy metals found to be easily released from ash. Based on the overall characteristics of ash in different locations at the MSWI during the investigation, some considerations and suggestions for determining the appropriate treatment methods of ash were made as conclusions.     

重金属废水处理与资源化利用现状

重金属废水的排放是重金属污染的重要源头之一。介绍了目前国内外用于处理不同重坌属废水的方法，以及重金属废水资源化可采用的多种工艺。在重金属废水资源化技术中，膜分离技术起着十分重要的作用。     

土壤-植物系统重金属形态分析和生物有效性研究进展

介绍了土壤-植物系统中重金属连续提取的形态分析方法研究进展,同时归纳了影响重金属生物有效性的主要因素,如土壤性质、复合污染及根际环境等,并指出了需要解决的问题与今后的发展方向。     

Bio-drying and size sorting of municipal solid waste with high water content for improving energy recovery

Bio-drying can enhance the sortability and heating value of municipal solid waste (MSW), consequently improving energy recovery. Bio-drying followed by size sorting was adopted for MSW with high water content to improve its combustibility and reduce potential environmental pollution during the follow-up incineration. The effects of bio-drying and waste particle size on heating values, acid gas and heavy metal emission potential were investigated. The results show that, the water content of MSW decreased from 73.0% to 48.3% after bio-drying, whereas its lower heating value (LHV) increased by 157%. The heavy metal concentrations increased by around 60% due to the loss of dry materials mainly resulting from biodegradation of food residues. The bio-dried waste fractions with particle size higher than 45 mm were mainly composed of plastics and papers, and were preferable for the production of refuse derived fuel (RDF) in view of higher LHV as well as lower heavy metal concentration and emission. However, due to the higher chlorine content and HCl emission potential, attention should be paid to acid gas and dioxin pollution control. Although LHVs of the waste fractions with size <45 mm increased by around 2× after bio-drying, they were still below the quality standards for RDF and much higher heavy metal pollution potential was observed. Different incineration strategies could be adopted for different particle size fractions of MSW, regarding to their combustibility and pollution property.     

喀斯特山区燃煤电厂土壤重金属污染评价

选取地处贵州省喀斯特山区的金沙电厂为研究对象,对电厂周围的表层土壤、蔬菜(莲花白)试样的重金属含量进行了测定,采用模糊数学法对土壤重金属污染进行了评价,采用富集系数法分析了莲花白对重金属的富集能力。实验结果表明:电厂周围表层土壤中Hg,As,Cd,Pb,Cu的平均含量分别达0.70,26.40,0.61,44.83,35.51 mg/kg,其中,Hg和Cd的平均含量分别为GB 15618—1995《土壤环境质量标准》中二级标准的1.40和2.03倍;电厂周围土壤受到较为严重的Hg,As,Cd污染,各个方向的重金属污染程度大小顺序为西北西东南西南东北东,总体趋势为西向大于东向;莲花白对土壤中Cd的富集作用较强,对其他重金属的富集作用较弱。     

Efforts to develop regulations in Korea similar to the US maximum achievable control technology (MACT) regulations for hazardous waste incinerators

The development of regulations patterned after the United States’ requirement for maximum achievable control technology (MACT) to control hazardous air pollutants from major industrial sources in Korea is in progress. Current management practices and installed air pollution control devices were surveyed; emission tests and continuous emission data collected from facilities under operation were assessed considering other MACT requirements such as reporting, report keeping requirements. Emission sampling and air pollutant analysis were carried out at representative hazardous waste incinerators installed with wet-type and dry-type air pollution control devices. Korean and United States Environmental Protection Agency methods were used for sampling and analysis. The major heavy metals emitted were Zn, Ni, Pb, and Cr. The heavy metal removal efficiency of existing air pollution control devices was greater than 99%. The average mercury removal efficiency was more than 30%. Toluene; m,p-xylene; o-xylene; benzene; dichloromethane; styrene; ethylbenzene; 1,3-dichlorobenzene; and 1,2,4-trimethylbenzene were the major volatile organic compounds emitted. The emissions from field tests were compared, reviewed, and analyzed with respect to MACT regulations to check applicability. Finally, draft guidelines were suggested for effective hazardous air pollutant management in Korea.