The use of the barbell cluster ANOVA design for the assessment of environmental pollution: a case study, Wigierski National Park, NE Poland

This report presents an assessment of chemical variability in natural ecosystems of Wigierski National Park (NE Poland) derived from the calculation of geochemical baselines using a barbell cluster ANOVA design. This method enabled us to obtain statistically valid information with a minimum number of samples collected. Results of summary statistics are presented for elemental concentrations in the soil horizons-O (Ol + Ofh), -A and -B, 1- and 2-year old Pinus sylvestris L. (Scots pine) needles, pine bark and Hypogymnia physodes (L.) Nyl. (lichen) thalli, as well as pH and TOC. The scope of this study also encompassed S and C stable isotope determinations and SEM examinations on Scots pine needles. The variability for S and trace metals in soils and plant bioindicators is primarily governed by parent material lithology and to a lesser extent by anthropogenic factors. This fact enabled us to study concentrations that are close to regional background levels.     

The effect of environmental conditions on the stability of heavy metal-filter material complex as assessed by the leaching of adsorbed metal ions

In this study the influence of environmental conditions, most likely prevailing in filter beds used for intermittently discharged pollutant streams such as landfill leachate and storm water, on the stability of the heavy metal-filter complex was investigated for 2 filter materials; non-treated and urea treated pine bark, using leaching experiments. The metal-filter complex stability was higher for urea treated than for non-treated pine bark and dependent on the metal adsorbed. The type of environmental condition applied was of less importance for the extent of leaching.     

Heavy metals in bark of <Emphasis Type="Italic">Pinus massoniana</Emphasis> (Lamb.) as an indicator of atmospheric deposition near a smeltery at Qujiang,China

Goal, Scope and Background Rapid urbanization and the expansion of industrial activities in the past several decades have led to large increases in emissions of pollutants in the Pearl River Delta of south China. Recent reports have suggested that industrial emission is a major factor contributing to the damages in current natural ecosystem in the Delta area. Tree barks have been used successfully to monitor the levels of atmospheric metal deposition in many areas, but rarely in China. This study aimed at determining whether atmospheric heavy metal deposition from a Pb-Zn smeltery at Qujiang, Guangdong province, could be accurately reflected both in the inner bark and the outer bark of Masson pine (Pinus massoniana L.). The impact of the emission from smeltery on the soils beneath the trees and the relationships of the concentrations between the soils and the barks were also analyzed. Methods Barks around the bole of Pinus massoniana from a pine forest near a Pb-Zn smeltery at Qujiang and a reference forest at Dinghushan natural reserve were sampled with a stainless knife at an average height of 1.5 m above the ground. Mosses and lichens on the surface barks were cleaned prior to sampling. The samples were carefully divided into the inner bark (living part) and the outer bark (dead part) in the laboratory, and dried and ground, respectively. After being dry-ashed, the powder of the barks was dissolved in HNO₃. The solutions were analyzed for iron (Fe), manganese (Mn), copper (Cu), zinc (Zn), chromium (Cr), nickel (Ni) and cobalt (Co) by inductively coupled plasmas emission spectrometry (ICP, PS-1000AT, USA) and Cadmium (Cd) and lead (Pb) by graphite furnace atomic absorption spectrometry (GFAAS, ZEENIT 60, Germany). Surface soils (0–10 cm) beneath the sample trees were also collected and analyzed for the selected metals. Results and Discussion Concentrations of the selected metals in soils at Qujiang were far above their environmental background values in the area, except for Fe and Mn, whilst at Dinghushan, they were far below their background values, except for Cd and Co. Levels of the metals, in particular Pb and Zn, in the soils beneath the sample trees at Qujiang were higher than those at Dinghushan with statistical significance. The result suggested that the pine forest soils at Qujiang had a great input of heavy metals from wet and dry atmospheric deposition, with the Pb-Zn smeltery most probably being the source. Levels of Cu, Fe, Mn, Zn, Ni and Pb at Qujiang, both in the inner and the outer bark, were statistically higher than those at Dinghushan. Higher concentrations of Pb, Fe, Zn and Cu may come from the stem-flow of elements leached from the canopy, soil splash on the 1.5 m height and sorption of metals in the mosses and lichens growing on the bark, which were direct or indirect results from the atmospheric deposition. Levels of heavy metals in the outer barks were associated well with the metal concentrations in the soil, reflecting the close relationships between the metal atmospheric deposition and their accumulation in the outer bark of Masson pine. The significant (p<0.01) correlations of Fe-Cu, Fe-Cr, Fe-Pb, Fe-Ni, Pb-Ni, and Pb-Zn in the outer barks at Qujiang again suggested a common source for the metals. The correlation only occurred between Pb and Ni, Cd and Co in the outer barks at Dinghushan, which suggested that those metals must possibly have other uncommon sources. Conclusions Atmospheric deposition of the selected metals was great at Qujiang, based on the levels in the bark of Pinus massoniana and on the concentrations in the soils beneath the trees compared with that at Dinghushan. Bark of Pinus massoniana, especially the outer bark, was an indicator of metal loading at least at the time of sampling. Recommendations and Perspectives The results from this study and the techniques employed constituted a new contribution to the development of biogeochemical methods for environmental monitoring particularly in areas with high frequency of pollution in China. The method would be of value for follow up studies aimed at the assessment of industrial pollution in other areas similar with the Pearl River Delta.     

Hazardous Waste Reduction Initiatives and the State Of Rhode Island

A comparative analysis of forest precipitation depositions was performed using pine tree barks as biomonitoring tools and throughfall collectors in pine stands at various test sites in eastern Germany. For the elements sulfate sulfur (SO₄-S), nitrate nitrogen (NO₃-N), ammonium nitrogen (NH₄-N), calcium (Ca), and iron (Fe), regression equations with r² values between 0.81 and 0.96 were derived, enabling yearly conversion of bark loads to throughfall rates (TFRs) in pine stands (g*m^-2*year^-1).

Applying this method to a network of 53 measuring sites in Dübener Heide nature park, north of Leipzig, lead to discovering spatial patterns of TFRs for SO₄-S, NO₃-N, and NH₄-N in 1994. Differences between the TFRs of sulfur and nitrogen were traced back to different emission sources and the temporal trend related to major infrastructural changes in that region since 1990. Results suggest that the bark method will be particularly suited to identifying forest precipitation depositions of ecotoxicologically relevant airborne pollutants on regional scales.     

Sorption of pentachlorophenol on pine bark

The minimization of pentachlorophenol (PCP) transport in the environment driven by industrial wastewater discharges can be accomplished by sorption in natural, available and low cost by-products like pine bark. Taking into account that PCP is a chemical which behaviour is highly dominated by the surrounding features, this work intended to evaluate the sorption kinetics and equilibrium parameters according to the pH and temperature as well as the pine bark particle size. The PCP uptake by pine bark showed to be faster in the initial phase followed by a slower process, being 24 h the suitably time to reach the sorption equilibrium in the range of pH studied. The neutral PCP species showed to have higher binding capacity to pine bark than the anionic PCP, which was reflected in a decrease in the distribution coefficient (Kd) of the linear sorption isotherm with the increase of solution pH from 2 to 7. On the other hand, between 10 degrees C and 35 degrees C, the temperature does not seem to play a significant role in the PCP sorption by pine bark, while the sorbent size is a key parameter to enhance the overall process.     

Self-organizing feature map (neural networks) as a tool to select the best indicator of road traffic pollution (soil, leaves or bark of Robinia pseudoacacia L.)

Concentrations of the elements Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb and Zn were measured in the leaves and bark of Robinia pseudoacacia and the soil in which it grew, in the town of Ole?nica (SW Poland) and at a control site. We selected this town because emission from motor vehicles is practically the only source of air pollution, and it seemed interesting to evaluate its influence on soil and plants. The self-organizing feature map (SOFM) yielded distinct groups of soils and R. pseudoacacia leaves and bark, depending on traffic intensity. Only the map classifying bark samples identified an additional group of highly polluted sites along the main highway from Wroc?aw to Warszawa. The bark of R. pseudoacacia seems to be a better bioindicator of long-term cumulative traffic pollution in the investigated area, while leaves are good indicators of short-term seasonal accumulation trends.     

基于遗传算法的大气污染总量控制新方法

提出一种利用遗传算法进行大气污染总量控制的新方法,并以柳州市SO2总量控制为例说明这种方法的具体运用.遗传算法具备自适应全局搜索寻优特点,从控制点浓度推算源强分布,该源强分布满足总量控制的根本要求.该方法的具体实现是:将区域内各污染源的排放量编码为染色体,让染色体群体在模拟的进化环境下按生物进化规律进行优胜劣汰的自然选择,经过若干代的进化,最终得到的最优个体即代表最佳的源强分布.研究结果表明,这种方法是有效的和可行的.     

Biomonitoring of the distribution of dust emissions by means of a new SEM/EDX technique

A new application of the Scanning Electron Microscope (SEM) equipped with an Energy Dispersive X-ray Microanalyzer (EDX) has been developed to study the distribution of airborne dust emissions. This technique makes it possible to identify the particles and measure the amount of dust deposition on the surface of the biomonitoring material. Pine bark or needles and moss can easily be used as the study material. A map indicating pollution levels and distribution can be drawn on the basis of the measured data.     

Tree bark as a passive air sampler to indicate atmospheric polybrominated diphenyl ethers (PBDEs) in southeastern China

The different barks were sampled to discuss the influence of the tree species, trunk circumference, and bark thickness on the accumulation processes of polybrominated diphenyl ethers (PBDEs) from air into the bark. The results of different PBDE concentrations indicated that barks with a thickness of 0–3 mm collected from weeping willow, Camphor tree, and Masson pine, the trunk circumferences of which were 100 to 150 cm, were better PBDEs passive samplers. Furthermore, tree bark and the corresponding air samples were collected at Anji (AJ), Hangzhou (HZ), Shanghai (SH), and Wenling (WL) to investigate the relationship between the PBDE concentrations in bark and those in air. In addition, the significant correlation (r ²?=?0.906; P?<?0.05) indicated that atmospheric PBDEs were the principle source for the accumulation of PBDEs in the barks. In this study, the log K _BA (bark–air partition coefficient) of individual PBDE congeners at the four sites were in the range from 5.69 to 6.79. Finally, the total PBDE concentration in WL was 5 to 20 times higher than in the other three cities. The result indicated that crude household workshops contributed a heavy amount of PBDEs pollution to the environment, which had been verified by the spatial distribution of PBDEs levels in barks collected at Wenling (range, 26.53–1317.68 ng/g dw). The good correlation between the PBDE concentrations in the barks and the air samples and the variations of the PBDE concentrations in tree barks collected from different sites reflected that the bark could be used as a passive sampler to indicate the atmospheric PBDEs.     

Packing material formulation for odorous emission biofiltration

In biological gas treatment, like biofiltration of volatile organic compounds or odorous substances, the microbial nutritional needs could be a key factor of the process. The aim of this work is to propose a new packing material able to provide the lacking nutrients. In the first part of this study, two kinds of material composed of calcium carbonate, an organic binder and two different nitrogen sources, ammonium phosphate and urea phosphate (UP), were compared. The new supports present bulk densities between 0.88 and 1.15g cm(-3), moisture retention capacities close to 50% and 70%, and water cohesion capacities greater than six months for the material with 20% binder. In the second part, oxygen consumption measurements in liquid experiments show that these packing materials could enhance bacterial growth compared to pine bark or pozzolan and have no inhibitory effect. The biodegradation of different substrates (sodium sulfide and ammonia) and the support colonization by the biomass were evaluated. Finally, UP 20 was chosen and tested in a hydrogen sulfide or ammoniac biofiltration process. This showed that, for H2S concentrations greater than 100mg m(-3), UP 20 has a real advantage over pine bark or pozzolan.     

Comparing estimates of fugitive landfill methane emissions using inverse plume modeling obtained with Surface Emission Monitoring (SEM), Drone Emission Monitoring (DEM), and Downwind Plume Emission Monitoring (DWPEM)

ABSTRACT

As part of the global effort to quantify and manage anthropogenic greenhouse gas emissions, there is considerable interest in quantifying methane emissions in municipal solid waste landfills. A variety of analytical and experimental methods are currently in use for this task. In this paper, an optimization-based estimation method is employed to assess fugitive landfill methane emissions. The method combines inverse plume modeling with ambient air methane concentration measurements. Three different measurement approaches are tested and compared. The method is combined with surface emission monitoring (SEM), above ground drone emission monitoring (DEM), and downwind plume emission monitoring (DWPEM). The methodology is first trialed and validated using synthetic datasets in a hand-generated case study. A field study is also presented where SEM, DEM and DWPEM are tested and compared. Methane flux during two-days measurement campaign was estimated to be between 228 and 350 g/s depending on the type of measurements used. Compared to SEM, using unmanned aerial systems (UAS) allows for a rapid and comprehensive coverage of the site. However, as showed through this work, advancement of DEM-based methane sampling is governed by the advances that could be made in UAS-compatible measurement instrumentations. Downwind plume emission monitoring led to a smaller estimated flux compared with SEM and DEM without information about positions of major leak points in the landfill. Even though, the method is simple and rapid for landfill methane screening. Finally, the optimization-based methodology originally developed for SEM, shows promising results when it is combined with the drone-based collected data and downwind concentration measurements. The studied cases also discovered the limitations of the studied sampling strategies which is exploited to identify improvement strategies and recommendations for a more efficient assessment of fugitive landfill methane emissions.

Implications: Fugitive landfill methane emission estimation is tackled in the present study. An optimization-based method combined with inverse plume modeling is employed to treat data from surface emission monitoring, drone-based emission monitoring and downwind plume emission monitoring. The study helped revealing the advantages and the limitations of the studied sampling strategies. Recommendations for an efficient assessment of landfill methane emissions are formulated. The method trialed in this study for fugitive landfill methane emission could also be appropriate for rapid screening of analogous greenhouse gas emission hotspots.     

Iron content and its relations to the sulphur and titanium contents of epiphytic and terricolous lichens and pine bark in Finland

The iron content was studied in the epiphytic lichens Hypogymnia physodes (L.) Nyl. and Pseudevernia furfuracea (L.) Zopf, in the terricolous lichens Cladina sp. and Peltigera aphthosa (L.) Willd., and in pine bark collected from 31 sites in Finland. There appeared to be differences between lichen species, epiphytes having generally higher concentrations. The iron content of H. physodes was highly significantly correlated (p<0.001) with its sulphur content, reflecting the relations of these elements in precipitation. The highly significant correlations between the iron and titanium contents indicated differences of the phorophytes. The iron/sulphur ratio of H. physodes on pine was 1.3 and on birch 1.4 and iron/titanium ratios were 10.4 and 11.3 respectively. The iron content of Cladina sp. showed highly significant parallel correlations (p<0.001) with its sulphur and titanium contents. The iron/titanium ratio decreased from 9.6 to 8.2 when the iron content increased by 95%, the sulphur content being equal. The iron/titanium ratio of Cladina sp. was nearly identical to that of P. furfuracea. The relation between iron and sulphur, and the fraction of soluble and insoluble iron in precipitation versus lichens and pine bark were considered. Special attention was paid in the discussion to differences in substrate: pine and birch bark for H. physodes, and soil for Cladina sp.     

Future-year ozone prediction for the United States using updated models and inputs

The relationship between emission reductions and changes in ozone can be studied using photochemical grid models. These models are updated with new information as it becomes available. The primary objective of this study was to update the previous Collet et al. studies by using the most up-to-date (at the time the study was done) modeling emission tools, inventories, and meteorology available to conduct ozone source attribution and sensitivity studies. Results show future-year, 2030, design values for 8-hr ozone concentrations were lower than base-year values, 2011. The ozone source attribution results for selected cities showed that boundary conditions were the dominant contributors to ozone concentrations at the western U.S. locations, and were important for many of the eastern U.S. locations. Point sources were generally more important in the eastern United States than in the western United States. The contributions of on-road mobile emissions were less than 5 ppb at a majority of the cities selected for analysis. The higher-order decoupled direct method (HDDM) results showed that in most of the locations selected for analysis, NOx emission reductions were more effective than VOC emission reductions in reducing ozone levels. The source attribution results from this study provide useful information on the important source categories and provide some initial guidance on future emission reduction strategies.

Implications: The relationship between emission reductions and changes in ozone can be studied using photochemical grid models, which are updated with new available information. This study was to update the previous Collet et al. studies by using the most current, at the time the study was done, models and inventory to conduct ozone source attribution and sensitivity studies. The source attribution results from this study provide useful information on the important source categories and provide some initial guidance on future emission reduction strategies.     

Assessment of the detection abilities of monitoring networks for passive tracers at local and regional scales

We propose a method to evaluate the detection abilities of networks used for protection purposes. Such networks are designed for the detection of nuclear, biological or gaseous emissions, without constraint on the source location. Their assigned goal is to have the best chance to detect a threatening emission located anywhere in the vicinity of a domain to protect. Two sensors siting applications are addressed: sensors placed in the surroundings of a facility to protect, or sensors carried by people scattered within a small area. A network protection ability is related both to its detection scope, and to its response time. To assess the performance of such networks, two statistical indicators are therefore designed: the detection probability, computed on a large number of possible source locations, and the saturation time, which is the time when the maximum detection probability has been reached.Simulations are then carried out with the Polyphemus air quality modeling system for many emission scenarios, including 961 possible source locations, various emitted species, and a few representative meteorological situations. This allows to assess the performance of single sensors as well as full networks, and their sensitivity to parameters like meteorological conditions and source characteristics. The emitted quantity and meteorological dispersion are found to be important parameters, whereas the species type does not significantly influence the results. Two network design methods are considered: (1) networks composed of a given number of the “best” sensors according to an indicator, and (2) sensors placed in circles around the protected domain. The networks built with respect to the detection probability show good results with a limited number of sensors, while the saturation time is not reliable enough to build networks. The networks based on circles also show a good performance in the studied cases, provided there is a sufficient number of sensors.     

Assessment of airborne heavy metal pollution by aboveground plant parts

Italian stone pine (Pinus pinea L.) and oleander (Nerium oleander L.) leaves, bark and wood samples were collected at different sites around an industrial area (Huelva, SW Spain) and compared with samples of the same species from a background site. Samples were analysed with respect to the following pollutants: Al, Ba, Cr, Cu, Fe and Pb by ICP-AES. The suitability of different plant parts as biomonitors of pollution was investigated. In pine samples from the polluted sites the ratio of concentrations between bark and wood was high for Al, Ba, Cu and Fe, whereas no differences were found in samples from the unpolluted area. No differences were detected in oleander for the same ratio. In the oleander species, the ratio between leaves and wood concentration allowed to distinguish between control and polluted sites. The ratio of the concentration between leaves and wood was elevated for Al, Ba and Fe in pine samples from the polluted sites. The ratio of the concentration in bark or leaves to their concentration in wood might be useful to detect inorganic atmospheric pollutants.     

Uptake of 207Pb and 111Cd through bark of mature sugar maple,white ash and white pine: a field experiment

A field study was undertaken to determine whether 207Pb and 111Cd, applied to the exterior bark of sugar maple (Acer saccharum Marsh.), white ash (Fraxinus americana L.) and white pine (Pinus strobus L.), could enter xylem tissue. Stable isotope tracers (3 microg Pb ml(-1); 2 microg Cd ml(-1)) were applied separately to bark in simulated rainfall, acidified to pH 4.5, in multiple doses over a 4 month (July-October) period. Tree cores were extracted from the region of application in the following March, and Pb and Cd isotopes were measured in bark and the outer tree rings using inductively coupled plasma mass spectrometry. The majority of the applied stable isotope tracer recovered (over 94%) was present in bark tissue, although a small amount of each metal tracer entered the outer (1-3) tree rings in all trees. Despite high concentrations of excess 207Pb in bark (up to 50 microg g(-1)), the maximum concentration of excess 207Pb measured in tree rings was only around 50 ng g(-1), which represents less than 30% of the background Pb concentration in wood at the study site. High excess 111Cd concentrations in bark (up to 35 microg g(-1)) also resulted in small increases in 111Cd in wood (up to 50 ng g(-1)), but due to lower background Cd concentrations in wood, such increases more than doubled the amount of Cd in wood compared with background levels. However, at sites where such high bark Cd concentrations are found, uptake from Cd-contaminated soil would probably be much greater than found at our study site. It appears that Cd and Pb applied to bark can enter woody tissue, but that this route of uptake is likely to be a minor contributor to the metal burden in wood.     

Use of treated bark for the removal of lipids from water

Raw, biologically treated bark and bark impregnated with transition metal ions were used to retain the lipids from synthetic emulsions. Several experimental parameters affecting the lipid removal efficiency (RE) were studied (initial concentration of lipids, temperature, time, pH, carboxylic acid chain length, etc.). Saturated bark was characterized using Fourier transform infrared (FTIR) spectroscopy and light microscopy, and the treated bark wetting index was determined. Results show that lipid removal can exceed 95% of the initial concentration at a pH lower than 7. The uptake of lipids by these sorbents varied from 0.2 to 2.5 g/g of dry bark. Trials for regenerating the sorbent saturated by lipids allowed the recovery of approximately 95% of lipids. The calorific value of the saturated bark was approximately 79% that of domestic fuel and can be considered as an energy source, thus avoiding its waste disposal. These results may upgrade the treatment of wastewater generated by several industrial sectors, such as the food industry, surface treatment, and so on.     

Scots pine needle surfaces on radial transects across the north boreal area of Finnish Lapland and the Kola Peninsula of Russia

To gain an understanding of the characteristics of the needle surfaces of naturally regenerated Scots pine (Pinus sylvestris L.) and their geographical distribution, eight physicochemical variables were investigated within the north boreal forest area. The visibly undamaged needles were collected in autumn 1990 from 114 plots (3-5 pines per plot) along radial transects from the Monchegorsk and Nikel smelters, emitting SO2 and heavy metals, on the Kola Peninsula, Russia, to Finnish Lapland. The needles were examined by scanning electron microscopy (SEM) and measured for surface wettability using the droplet contact angle (DCA) method. Significant geographical south-north and west-east patterns could be observed in needle surface characteristics, correlating with emissions from the smelters and to climate. Despite the slightly higher initial DCAs (61.4-87.6 degrees) towards the north, the pine needle surfaces of the northernmost transects exhibited higher annual needle wettability change (ANWC) and wax erosion rate (AWER), expressed as the reduction in DCAs and epistomatal wax tube distribution (WTD) during one year, respectively, but a lower occurrence of particles and fungal hyphae than those of more southern transects. The higher ANWC was related to higher atmospheric SO2 concentration, and to the lower long-term temperature sum, but not clearly to annual precipitation. In the Monchegorsk smelter area, the current needles exhibited, on average, a 15% higher WTD and seven degree larger DCA, resulting in more hydrophobic needle surfaces than in Finnish Lapland, but during their first year, both the AWER and ANWC, were greatly increased. In Finnish Lapland, 30%, of all the epistomatal wax tubes disappeared from the needle surface during the first year, the value being 70% for the pines located 8 km from the smelter. The mineral composition of the particles deposited on the needle surfaces mirrored that of the minerals being produced by the smelters (e.g. FexSx, CuFeS2, NixSx, FexOx). Stomatal densities were in the range of 71.1-141.7 stomata mm(-2). The lower densities of stomata on needles close to the smelters correlated with reduced number of needle age classes of the pines, higher dry weights, higher pollutant accumulation and lower Mn and Zn concentrations in the needles. The AWER and ANWC were able to indicate the most seriously deteriorated needle surfaces on a regional scale, e.g. including the surroundings of both smelters, although the plot-specific relationships between 'needle surface variables' and 'pollution variables' were generally weak. The present study showed that the exposure of pine needles to the combined effects of ambient pollutants and harsh climate led to a deterioration in the physicochemical characteristics of the epicuticular wax, which may have serious ecophysiological consequences in the long term.     

Sulphur isotope composition of epiphytic and terricolous lichens and pine bark in Finland

The sulphur isotope composition of the epiphytic lichens, Hypogymnia physodes (L.) Nyl and Pseudevernia furfuracea (L.) Zopf, of the terricolous lichens, Cladina sp. and Peltigera aphthosa (L.) Willd., and of pine bark, at 31 sites in Finland, appeared to be dependent on lichen and tree species. The negative correlation of sulphur isotope composition with sulphur content was highly significant (P<0.001) in H. physodes and significant (P<0.01) in Pseudevernia furfuracea and Peltigera aphthosa. No correlation between the sulphur isotope composition and sulphur content was found for Cladina sp. and pine bark. The sulphur isotope compositions displayed statistically significant regional variation from south to north. Microenvironmental factors were considered, including phorophyte species and the chemical form of sulphur.     

Open-path tunable diode laser absorption spectroscopy for acquisition of fugitive emission flux data

Air pollutant emission from unconfined sources is an increasingly important environmental issue. The U.S. Environmental Protection Agency (EPA) has developed a ground-based optical remote-sensing method that enables direct measurement of fugitive emission flux from large area sources. Open-path Fourier transform infrared spectroscopy (OP-FTIR) has been the primary technique for acquisition of pollutant concentration data used in this emission measurement method. For a number of environmentally important compounds, such as ammonia and methane, open-path tunable diode laser absorption spectroscopy (OP-TDLAS) is shown to be a viable alternative to Fourier transform spectroscopy for pollutant concentration measurements. Near-IR diode laser spectroscopy systems offer significant operational and cost advantages over Fourier transform instruments enabling more efficient implementation of the measurement strategy. This article reviews the EPA's fugitive emission measurement method and describes its multipath tunable diode laser instrument. Validation testing of the system is discussed. OP-TDLAS versus OP-FTIR correlation testing results for ammonia (R2 = 0.980) and methane (R2 = 0.991) are reported. Two example applications of tunable diode laser-based fugitive emission measurements are presented.