Utilization of coal combustion by-products in sustainable construction materials

Solid waste management is gaining significant importance with the ever-increasing quantities of industrial by-products and wastes. With the environmental awareness and scarcity of space for landfilling, wastes/by-product utilization has become an attractive alternative to disposal. Several industrial by-products are produced from manufacturing processes, service industries and municipal solid wastes. Some of these industrial by-products/waste materials could possibility be used in cement-based materials.Coal combustion by-products (CCBs) represent incombustible materials left after combustion of coal in conventional and/or advanced clean-coal technology combustors. These include fly ash, bottom ash, boiler slag, and flue gas desulfurization (FGD) by-products from advanced clean-coal technology combustors. This paper briefly describes various coal combustion products produced, as well as current best recycling use options for these materials. Materials, productions, properties, potential applications in manufacture of emerging materials for sustainable construction, as well as environmental impact are also briefly discussed.     

Peat fire effects on some properties of an artificially drained peatland

The management of artificially drained organic soils is a very important issue, since the accelerated mineralization and sometimes peat fires alter physical and chemical properties of soils and the availability of plant nutrients. This study was performed to determine relatively short- and long-term effects of peat fires on some physical and chemical properties of soils in the artificially drained Gavur Lake Peatland of Turkey. To achieve this objective, measured properties of soils burned in 2001, burned in 1965, and unburned were compared. The results indicated that soil bulk density, pH, amounts of soluble salts, CaCO3, and concentrations of ammonium acetate-extractable (AAE) Ca, Mg, K, and Na were significantly higher for both sampling depths in the burned areas. The areas burned in 2001 had higher pH, soluble salts, and the concentrations of AAE Ca, Mg, and K compared with sites burned in 1965, and this was reasoned with leaching losses and plant uptake of these basic cations for four decades in the latter. Percent saturation and organic carbon contents of soils, however, were significantly lower in the burned areas for both sampling depths. Olsen P levels were not significantly different between the sites. This work clearly shows that alterations in soils properties with peat fires do not recover in the long term.     

Bedding and seasonal effects on chemical and bacterial properties of feedlot cattle manure

Nutrients, soluble salts, and pathogenic bacteria in feedlot-pen manure have the potential to cause pollution of the environment. A three-year study (1998-2000) was conducted at a beef cattle (Bos taurus) feedlot in southern Alberta, Canada to determine the effect of bedding material [barley (Hordeum vulgare L.) straw versus wood chips] and season on the chemical and bacterial properties of pen-floor manure. Manure was sampled for chemical content (N, P, soluble salts, electrical conductivity, and pH) and populations of four groups of bacteria (Escherichia coli, total coliforms, and total aerobic heterotrophs at 27 and 39 degrees C). More chemical parameters of manure were significantly (P < or = 0.05) affected by season (SO4, Na, Mg, K, Ca, sodium adsorption ratio [SAR], total C, NO3-N, NH4-N, total P, and available P) than by bedding (K, pH, total C, C to N ratio, NH4-N, and available P). Bedding had no significant (P > 0.05) effect on the four bacterial groups whereas season affected all four groups. Numbers of E. coli and total coliforms (TC) were significantly higher by 1.72 to 2.02 log10 units in the summer than the other three seasons, which was consistent with a strong positive correlation of E. coli and TC with air temperature. The low ratio of bedding to manure in the pens was probably the major cause of the lack of significant bedding effects. Bedding material and seasonal timing of cleaning feedlot pens and land application of manure may be a potential tool to manage nutrients, soluble salts, and pathogens in manure.     

Humic acid formation in artificial soils amended with compost at different stages of organic matter evolution

A composting process was conducted under optimal conditions for 150 d, obtaining three biomasses at different levels of maturity: raw material (RM), fresh compost obtained after 11 d of composting (FC), and evolved compost (EC) obtained after 150 d of composting. During the composting process, HAs were extracted and fully characterized by mass balance, DRIFT, and 1H and 13C-nuclear magnetic resonance spectroscopy. Each compost sample was incubated for 180 d in an artificial soil, after which HA extraction was repeated and characterized. To compare composts containing different amounts of labile organic matter (OM), an equal amount of unhydrolyzable OM was added to the soils. Our results indicated that compost HAs consist of a biologically and chemically stable fraction (i.e., the unhydrolyzable HA [U-HA]) and a labile fraction, whose relative contents depended on the composting duration. Humic acid from more EC contained a higher amount of recalcitrant fraction (aromatic carbon) and a lesser amount of labile fraction (aliphatic carbon) than HA from RM and FC. These results suggest that the humification process during composting preserves the more recalcitrant fraction of the compost-alkali soluble/acid insoluble fraction (HA-fraction). Incubation of composts in soil showed that due to the higher labile fraction content, HAs from raw material were more degraded than those from EC. The abundance of labile carbon of soil amended with less-evolved compost (RM and FC) allowed the more recalcitrant fractions of U-HA to be more preserved than in EC. These results suggest that less-evolved compost could contribute more than well evolved compost to the stable soil OM.     

Plant-available and water-soluble phosphorus in soils amended with separated manure solids

Physical, chemical, or biological treatment of animal liquid manure generally produces a dry-matter rich fraction (DMF) that contains most of the initial phosphorus (P). Our objective was to assess the solubility and plant availability of P from various DMFs as a function of soil P status. Eight different DMFs were obtained from liquid swine (LSM) and dairy cattle (LDC) manures treated by natural decantation, anaerobic digestion, chemical flocculation, composting, or mechanical separation. The DMFs were compared with mineral P fertilizer in a pot experiment with oat ( L.) grown in four soils with varied P-fixing capacities and P saturation levels. The DMFs were added at a rate of 50 mg P kg soil and incubated 14 d before seeding. Soil water-extractable P (P) at all water:soil extraction ratios (2:1, 20:1, and 200:1) was slightly higher when DMFs were derived from LDC rather than LSM. Soil P at the 2:1 ratio was lower with anaerobically digested LSM. At the 2:1 extraction ratio, DMF P was less soluble than mineral P as P saturation in soils increased. In soils with a lower P-fixing capacity, DMF P appeared less water soluble than mineral P under 20:1 and 200:1 extraction ratios. After 72 d of plant growth, DMFs produced yields comparable to mineral P fertilizer. Although the plant availability of P from DMFs was comparable to mineral P fertilizer, P from DMFs could be less vulnerable to leaching or runoff losses in soils with a high P saturation level or low P-fixing capacity.     

Bedding and within-pen location effects on feedlot pen runoff quality using a rainfall simulator

Soluble salts, nutrients, and pathogenic bacteria in feedlot-pen runoff have the potential to cause pollution of the environment. A 2-yr study (1998-1999) was conducted at a beef cattle (Bos taurus) feedlot in southern Alberta, Canada, to determine the effect of bedding material [barley (Hordeum vulgare L.) straw versus wood chips] and within-pen location on the chemical and bacterial properties of pen-floor runoff. Runoff was generated with a portable rainfall simulator and analyzed for chemical content (nitrogen [N], phosphorus [P], soluble salts, electrical conductivity [EC], sodium adsorption ratio [SAR], dissolved oxygen [DO], and pH) and populations of three groups of bacteria (Escherichia coli, total coliforms, total aerobic heterotrophs at 27 degrees C) in 1998 and 1999. Bedding had a significant (P < or = 0.05) effect on NH4-N concentration and load in 1999, SO4 load in 1998, SO4 concentration and load in 1999, and total coliforms in both years; where these three variables were higher in wood than straw pens. Location had a significant effect on EC and concentrations of total Kjeldahl nitrogen (TKN), Na, K, SO4, and Cl in 1998, and total coliforms in both years. These seven variables were higher at the bedding pack than pen floor location, indicating that bedding packs were major reservoirs of TKN, soluble salts, and total coliforms. Significantly higher dissolved reactive phosphorus (DRP), total P, and NH4-N concentrations and loads at the bedding pack location in wood pens in 1998, and a similar trend for TKN concentration in 1999, indicated that this bedding-location treatment was a greater source of nutrients to runoff than the other three bedding-location treatments. Bedding, location, and their interaction may therefore be a potential tool to manage nutrients, soluble salts, and bacteria in feedlot runoff.     

Diversion from landfill: quality products from valuable plastics

Mechanical recycling of 100% post-consumer plastic waste into high-quality products has been performed. The chemical and physical properties of these recycled materials have been compared with similar products manufactured from virgin resins. The properties of a blow-moulded bottle prepared from 100% post-consumer high-density polyethylene (HDPE) showed that this recycled polymer exceeded the materials specifications for virgin plastic designs. Similarly, a sample of thermoplastic polyolefin (TPO, 100% polypropylene), obtained entirely from shredder residue (SR) displayed sufficient material strength for future separation and reprocessing.     

Physicochemical characteristics of animal and municipal wastes decomposed in arid soils

The application of anaerobically processed animal manure to maintain adequate levels of organic matter in arid soils is becoming a common practice. The purpose of this study was to characterize two farm manure products as compared with municipal waste compost (MWC). The anaerobic processing to obtain a biogas manure (BM) product was much faster (25 d) than the aerobic composting of farmyard manure (FYM) (90 d). Drying by three different methods (solar-drying, vacuum-drying at 45 degrees C, and freeze-drying) did not affect the quality of BM. Based on the chemical characteristics, FYM and BM products were comparable, and, containing less ash (30%) and heavy metals (50 mg Pb kg(-1)), seemed superior to MWC that contained 65% ash and 108 mg Pb kg(-1). On the other hand, MWC had higher C content (69.9%), lower acidity (15.04 mol kg(-1)), and higher exothermic peaks (300-460 degrees C) than BM and FYM (50% C, 20 mol kg(-1), and 275-450 degrees C, respectively), thus showing a greater extent of humification. Also, when the organic materials were incubated with arid soils and monitored for mean residence times (MRT), MWC was slightly more resistant to decomposition (MRT 175-180 d) than BM or FYM (MRT 161-166 d). The observed differences, however, were too small to dismiss any of the products as a valuable material for land applications to improve soil quality. In view of the results obtained, MWC may be considered an adequate substitute for BM or FYM, whenever the latter are in short supply.     

Leaching composted lignocellulosic wastes to prepare container media: Feasibility and environmental concerns

The leaching of salt and mineral elements from three composts prepared with residual vegetable crop biomass (melon, pepper or zucchini) was studied using methacrylate columns and distilled water. The benefits of the leached composts to be used for ornamental potted plant production were also analysed. After leaching 5 container capacities of effluent, both the electrical conductivity and the concentration of soluble mineral elements in compost leachates decreased substantially and remained close to the target levels. Composts reacted differently to leaching due to differences in the raw waste sources and the composting process and hence, in their physical and chemical characteristics. At the end of the experiment, after pouring 8 container capacities of water, the leaching efficiency of the salts was 96%, 93% and 87% for melon, pepper and zucchini-based composts, respectively. Mineral elements differed in their ability to be removed from the composts; N (NH₄⁺ and NO₃^?), K⁺, Na⁺, Cl^?, and SO₄^2? were leached readily, whereas H₂PO₄^?, Ca²⁺, and Mg²⁺ were removed hardly. Leached composts showed a range of physico-chemical and chemical characteristics suitable for use as growing media constituents. Potted Calendula and Calceolaria plants grew in the substrates prepared with the leached composts better than in those made with the non-leached ones. Finally, special emphasis must be paid to the management of the effluents produced under commercial conditions to avoid environmental pollution.     

Sugarcane bagasse—The future composite material: A literature review

The natural, bio-degradable features and chemical constituents of the sugarcane bagasse (SCB) have been attracting attention as a highly potential and versatile ingredient in composite materials. Eco-friendly and low cost considerations have set the momentum for material science researchers to identify green materials that give low pollutant indexes. Various components of SCB is shown to possess the ability of being applied as raw material for manufacturing of composite materials at multiple levels of properties and performances. Studies on the impacts, performances and applications of SCB in its original condition; transformed forms; treated with appropriate chemicals and/or processes; in combination with materials of distinct properties and manipulation of manufacturing methodologies have been duly considered. This paper attempts to summarize a review of current literature on the extensive studies that have been undertaken in an attempt to explore plausible applications and potentials of SCB for composite material.     

Degradation of greenhouse twines derived from natural fibers and biodegradable polymer during composting

Commercial composting operations generally do not accept organic wastes with plastic twines from the greenhouse vegetable industry and the bulk of the waste materials ends up in landfills. The objectives of this paper are to identify environmentally compatible substitutes that could replace the current use of petrochemically derived plastic twines in greenhouse vegetable production, thus diverting them from landfills, and to assess the extent of their degradation via composting. Physical properties of the twines, including linear density, percent weight loss and tensile strength were monitored for the biodegradation tests. A pilot-scale composting trial was conducted in an in-vessel composting system. Results showed that the three biodegradable twine materials (cotton, jute and EcoPLA) could degrade readily in a composting environment within a reasonable time frame. Specifically, at the end of 105 days of composting, 85.3%, 84.8% and 81.1% of weight loss was observed for cotton, jute and EcoPLA, respectively. Furthermore, EcoPLA exhibited a slower decline in tensile strength with time, when compared to jute and cotton.     

Effect of chemical and microbial amendments on ammonia volatilization from composting poultry litter

Research has shown that aluminum sulfate (alum) and phosphoric acid greatly reduce ammonia (NH3) volatilization from poultry litter; however, no studies have yet reported the effects of these amendments on field-scale composting of poultry litter. The objectives of this study were to (i) evaluate NH3 volatilization from composting litter by measuring both NH3 volatilization and changes in total nitrogen (N) in the litter and (ii) evaluate potential methods of reducing NH3 losses from composting poultry litter. Poultry litter was composted for 68 d the first year and 92 d the second year. Eleven treatments were screened in Year 1, which included an unamended control, a microbial mixture, a microbial mixture with 5% alum incorporated into the litter, 5 and 10% alum rates either surface-applied or incorporated, and 1 and 2% phosphoric acid rates either surface-applied or incorporated. Treatments in Year 2 included an unamended control, a microbial mixture, alum (7% by fresh wt.), and phosphoric acid (1.5% by fresh wt.). Alum and phosphoric acid reduced NH3 volatilization from composting poultry litter by as much as 76 and 54%, respectively. The highest NH3 emission rates were from microbial treatments each year. Compost treated with chemical amendments retained more initial N than all other treatments. Due to the cost and N loss associated with composting poultry litter, composting is not economical from an agronomic perspective compared with the use of fresh poultry litter.     

Composting and compost application in China

The current situation of municipal solid waste (MSW) and sewage sludge production (in terms of volume as well as composition) in China is introduced. Composting and compost application in China are reviewed. In China, the production of municipal solid waste and sewage sludge is changing rapidly along with economic development. Composting is mainly applied for treating MSW, about 20% of the total amount of MSW being disposed. MSW composting is mainly co-composted with night soil or sewage sludge. Compost is used in agriculture, forestry and horticulture. Compost application is the key factor influencing the composting development in China. To promote composting and compost application in China, a state-wide survey on the production, composition and physical and chemical properties of MSW and sewage sludge should be carried out. More effort should be made to develop low cost and high efficient composting technologies according to China's conditions. The environmental impact of compost application should also be given more attention.     

通风条件对城市污水厂污泥好氧堆肥过程的影响

本文选择堆肥熟料作为添加剂与城市污水厂污泥混合进行好氧堆肥。通过对温度、耗氧速率、有机物、含水率、pH值和氨氮等指标的分析,重点研究了不同通风条件对堆肥过程的影响。实验结果表明,污泥与熟料混合后,有机物含量较低,堆肥速率较快,对通风条件的改变比较敏感。当通风量低于0.025m3/(m3.min)时,堆肥前期系统供氧不足,堆肥速率较慢,耗时长,同时堆体内变为厌氧环境,pH值变低,臭气产生量高;当通风量高于0.05m3/(m3.min)以及采用变风量通风时,在保证供氧量充足的同时,具有较长的高温期,具有臭气产生量小、堆肥速率快的优点,但采用变风量通风更加节能。     

污染底泥掩蔽材料筛选综述

随着经济的高速发展,水体底泥污染已成为世界性的一个环境问题。掩蔽修复是一种修复效果明显,且工程造价较低的水体底泥修复技术,而掩蔽技术的关键在于掩蔽材料的选择。本文主要介绍了水泥、粉煤灰、沸石、方解石、铝盐等研究较为成熟的且具有应用前景的掩蔽材料,分析其各自的原理及优缺点。同时作者在文章中提出了一种新的掩蔽剂——净水厂改性污泥,对其的可行性进行了分析。并就掩蔽材料的选择的技术要求以及原则作出分析。     

A simple numerical model for predicting organic matter decomposition in a fed-batch composting operation

Using dog food as a model of the organic waste that comprises composting raw material, the degradation pattern of organic materials was examined by continuously measuring the quantity of CO2 evolved during the composting process in both batch and fed-batch operations. A simple numerical model was made on the basis of three suppositions for describing the organic matter decomposition in the batch operation. First, a certain quantity of carbon in the dog food was assumed to be recalcitrant to degradation in the composting reactor within the retention time allowed. Second, it was assumed that the decomposition rate of carbon is proportional to the quantity of easily degradable carbon, that is, the carbon recalcitrant to degradation was subtracted from the total carbon remaining in the dog food. Third, a certain lag time is assumed to occur before the start of active decomposition of organic matter in the dog food; this lag corresponds to the time required for microorganisms to proliferate and become active. It was then ascertained that the decomposition pattern for the organic matter in the dog food during the fed-batch operation could be predicted by the numerical model with the parameters obtained from the batch operation. This numerical model was modified so that the change in dry weight of composting materials could be obtained. The modified model was found suitable for describing the organic matter decomposition pattern in an actual fed-batch composting operation of the garbage obtained from a restaurant, approximately 10 kg d(-1) loading for 60 d.     

Vermiculture and waste management: study of action of earthworms Elsinia foetida, Eudrilus euginae and Perionyx excavatus on biodegradation of some community wastes in India and Australia

The practice of vermiculture is at least a century old but it is now being revived worldwide with diverse ecological objectives such as waste management, soil detoxification and regeneration and sustainable agriculture. Earthworms act in the soil as aerators, grinders, crushers, chemical degraders and biological stimulators. They secrete enzymes, proteases, lipases, amylases, cellulases and chitinases which bring about rapid biochemical conversion of the cellulosic and the proteinaceous materials in the variety of organic wastes which originate from homes, gardens, dairies and farms. The process is odour free because earthworms release coelomic fluids in the decaying waste biomass which has anti-bacterial properties which kills pathogens. The species used in India were Indian blue (Perionyx excavatus), African night crawler (Eudrilus euginae) and the Tiger worm (Elsinia foetida). E. foetida was used in Australia. E. euginae was found to have higher feeding, growth and biodegradation capacity compared to other two species.Earthworm action was shown to enhance natural biodegradation and decomposition of wastes (60–80 percent under optimum conditions), thus significantly reducing the composting time by several weeks. Within 5 to 6 weeks, 95–100 percent degradation of all cellulosic materials was achieved. Even hard fruit and egg shells and bones can be degraded, although these may take longer.     

Effect of amendment of bauxite processing sand with organic materials on its chemical,physical and microbial properties

The effects of addition of a range of organic amendments (biosolids, spent mushroom compost, green waste compost and green waste-derived biochar), at two rates, on some key chemical, physical and microbial properties of bauxite-processing residue sand were studied in a laboratory incubation study. Levels of exchangeable cations were not greatly affected by additions of amendments but extractable P was increased significantly by mushroom and green waste composts and massively (i.e. from 11.8 to 966 mg P kg^?1) by biosolids applications. Levels of extractable NO₃^?–N were also greatly elevated by biosolids additions and there was a concomitant decrease in pH. Addition of all amendments decreased bulk density and increased mesoporosity, available water holding capacity and water retention at field capacity (?10 kPa), with the higher rate having a greater effect. Addition of biosolids, mushroom compost and green waste compost all increased soluble organic C, microbial biomass C, basal respiration and the activities of β-glucosidase, L-asparaginase and alkali phosphatase enzymes. The germination index of watercress grown in the materials was greatly reduced by biosolids application and this was attributed to the combined effects of a high EC and high concentrations of extractable P and NO₃^?. It was concluded that the increases in water storage and retention and microbial activity induced by additions of the composts is likely to improve the properties of bauxite-processing residue sand as a growth medium but that allowing time for soluble salts, originating from the organic amendments, to leach out may be an important consideration before sowing seeds.     

Persistent organic pollutants in source-separated compost and its feedstock materials--a review of field studies

Composting and the application of compost to the soil follow the principle of recycling and sustainability. Compost can also have a positive effect on physical, chemical, and biological soil parameters. However, little is known about the origin, concentration, and transformation of persistent organic pollutants (POPs) in compost. We therefore compiled literature data on some priority POPs in compost and its main feedstock materials from more than 60 reports. Our data evaluation suggests the following findings. First, median concentrations of Sigma 16 polycyclic aromatic hydrocarbons (PAHs), Sigma 6 polychlorinated biphenyls (PCBs), and Sigma 17 polychlorinated dibenzo-p-dioxins and -furans (PCDD/Fs) were higher in green waste (1803, 15.6 microg/kg dry wt., and 2.5 ng international toxicity equivalent [I-TEQ]/kg dry wt.) than in organic household waste (635, 14.6 microg/kg dry wt., and 2.2 ng I-TEQ/kg dry wt.) and kitchen waste (not available [NA], 14.9 microg/kg dry wt., 0.4 ng I-TEQ/kg dry wt.). The POP concentrations in foliage were up to 12 times higher than in other feedstock materials. Second, in contrast, compost from organic household waste and green waste contained similar amounts of Sigma 16 PAHs, Sigma 6 PCBs, and Sigma 17 PCDD/Fs (1915, 39.8 microg/kg dry wt., and 9.5 ng I-TEQ/kg dry wt., and 1715, 30.6 microg/kg dry wt., and 8.5 ng I-TEQ/kg dry wt., respectively). Third, concentrations of three-ring PAHs were reduced during the composting process, whereas five- to six-ring PAHs and Sigma 6 PCBs increased by roughly a factor of two due to mass reduction during composting. Sigma 17 PCDD/Fs had accumulated by up to a factor of 14. Fourth, urban feedstock and compost had higher POP concentrations than rural material. Fifth, the highest concentrations of POPs were usually observed in summer samples. Finally, median compost concentrations of POPs were greater by up to one order of magnitude than in arable soils, as the primary recipients of compost, but were well within the range of many urban soils. In conclusion, this work provides a basis for the further improvement of composting and for future risk assessments of compost application.