共查询到20条相似文献,搜索用时 10 毫秒
1.
Jesus M. Paniagua Montaña Rufo Antonio Jimenez Alicia Antolin 《Environmental monitoring and assessment》2013,185(1):311-322
Determining the electromagnetic radiation levels in urban areas is a complicated task. Various approaches have been taken, including numerical simulations using different models of propagation, sampling campaigns to measure field values with which to validate theoretical models, and the formalism of spatial statistics. In the work, we present here that this latter technique was used to construct maps of electric field and its associated uncertainty from experimental data. For this purpose, a field meter and a broadband probe sensitive in the 100-kHz–3-GHz frequency range were used to take 1,020 measurements around buildings and along the perimeter of the area. The distance between sampling points was 5 m. The results were stored in a geographic information system to facilitate data handling and analysis, in particular, the application of the formalism of spatial statistical to the analysis of the distribution of the field levels over the study area. The spatial structure was analyzed using the variographic technique, with the field levels at non-sampled points being interpolated by kriging. The results indicated that, in the urban area analyzed in the present work, the linear density of sampling points could be reduced to a distance which coincides with the length of the blocks of buildings without the statistical parameters varying significantly and with the field level maps being reproduced qualitatively and quantitatively. 相似文献
2.
研究发现 ,三种不同配制方法的磷酸盐缓冲液 ,用于异烟酸 -吡唑啉酮分光光度法测定氰化物时 ,无显著性差异 ;对吡啶 -巴比妥酸分光光度法 ,由于盐效应的影响 ,采用小剂量配制的缓冲液 ,反应的相关性好且灵敏度高 相似文献
3.
Patrizia Gasparini Lucio Di Cosmo Enrico Cenni Enrico Pompei Marco Ferretti 《Environmental monitoring and assessment》2013,185(7):6155-6171
In the frame of a process aiming at harmonizing National Forest Inventory (NFI) and ICP Forests Level I Forest Condition Monitoring (FCM) in Italy, we investigated (a) the long-term consistency between FCM sample points (a subsample of the first NFI, 1985, NFI_1) and recent forest area estimates (after the second NFI, 2005, NFI_2) and (b) the effect of tree selection method (tree-based or plot-based) on sample composition and defoliation statistics. The two investigations were carried out on 261 and 252 FCM sites, respectively. Results show that some individual forest categories (larch and stone pine, Norway spruce, other coniferous, beech, temperate oaks and cork oak forests) are over-represented and others (hornbeam and hophornbeam, other deciduous broadleaved and holm oak forests) are under-represented in the FCM sample. This is probably due to a change in forest cover, which has increased by 1,559,200 ha from 1985 to 2005. In case of shift from a tree-based to a plot-based selection method, 3,130 (46.7 %) of the original 6,703 sample trees will be abandoned, and 1,473 new trees will be selected. The balance between exclusion of former sample trees and inclusion of new ones will be particularly unfavourable for conifers (with only 16.4 % of excluded trees replaced by new ones) and less for deciduous broadleaves (with 63.5 % of excluded trees replaced). The total number of tree species surveyed will not be impacted, while the number of trees per species will, and the resulting (plot-based) sample composition will have a much larger frequency of deciduous broadleaved trees. The newly selected trees have—in general—smaller diameter at breast height (DBH) and defoliation scores. Given the larger rate of turnover, the deciduous broadleaved part of the sample will be more impacted. Our results suggest that both a revision of FCM network to account for forest area change and a plot-based approach to permit statistical inference and avoid bias in the tree sample composition in terms of DBH (and likely age and structure) are desirable in Italy. As the adoption of a plot-based approach will keep a large share of the trees formerly selected, direct tree-by-tree comparison will remain possible, thus limiting the impact on the time series comparability. In addition, the plot-based design will favour the integration with NFI_2. 相似文献
4.
Incineration of acrylic waste solution in a lab scale quartz tube vertical incinerator showed the presence of 12–15 polycyclic
aromatic hydrocarbons (PAHs) from a list of 16 priority pollutants at 700–1100˚C after an interval of 50˚C. The amount of total 16 PAHs at 900 and 1100˚C was about 8.5 and 1.25 times higher than those at 700˚C (739.48 μg g−1) respectively. The amount of total probable (2A) and possible (2B) human carcinogenic PAHs was minimum at 700˚C. 相似文献
5.
6.
Keryn I. Paul John S. Larmour Stephen H. Roxburgh Jacqueline R. England Micah J. Davies Hamish D. Luck 《Environmental monitoring and assessment》2017,189(8):416
Stem diameter is one of the most common measurements made to assess the growth of woody vegetation, and the commercial and environmental benefits that it provides (e.g. wood or biomass products, carbon sequestration, landscape remediation). Yet inconsistency in its measurement is a continuing source of error in estimates of stand-scale measures such as basal area, biomass, and volume. Here we assessed errors in stem diameter measurement through repeated measurements of individual trees and shrubs of varying size and form (i.e. single- and multi-stemmed) across a range of contrasting stands, from complex mixed-species plantings to commercial single-species plantations. We compared a standard diameter tape with a Stepped Diameter Gauge (SDG) for time efficiency and measurement error. Measurement errors in diameter were slightly (but significantly) influenced by size and form of the tree or shrub, and stem height at which the measurement was made. Compared to standard tape measurement, the mean systematic error with SDG measurement was only ?0.17 cm, but varied between ?0.10 and ?0.52 cm. Similarly, random error was relatively large, with standard deviations (and percentage coefficients of variation) averaging only 0.36 cm (and 3.8%), but varying between 0.14 and 0.61 cm (and 1.9 and 7.1%). However, at the stand scale, sampling errors (i.e. how well individual trees or shrubs selected for measurement of diameter represented the true stand population in terms of the average and distribution of diameter) generally had at least a tenfold greater influence on random errors in basal area estimates than errors in diameter measurements. This supports the use of diameter measurement tools that have high efficiency, such as the SDG. Use of the SDG almost halved the time required for measurements compared to the diameter tape. Based on these findings, recommendations include the following: (i) use of a tape to maximise accuracy when developing allometric models, or when monitoring relatively small changes in permanent sample plots (e.g. National Forest Inventories), noting that care is required in irregular-shaped, large-single-stemmed individuals, and (ii) use of a SDG to maximise efficiency when using inventory methods to assess basal area, and hence biomass or wood volume, at the stand scale (i.e. in studies of impacts of management or site quality) where there are budgetary constraints, noting the importance of sufficient sample sizes to ensure that the population sampled represents the true population. 相似文献
7.
Clarke KD Lewis M Brandle R Ostendorf B 《Environmental monitoring and assessment》2012,184(2):625-635
Rare, small or annual vegetation species are widely known to be imperfectly detected with single site surveys by most conventional
vegetation survey methods. However, the detectability of common, persistent vegetation species is assumed to be high, but
without supporting research. In this study, we evaluate the extent of false-negative errors of perennial vegetation species
in a systematic vegetation survey in arid South Australia. Analysis was limited to the seven most easily detected persistent
vegetation species and controlled for observer skill. By comparison of methodologies, we then predict the magnitude of non-detection
error rates in a second survey. The analysis revealed that all but one highly detectable perennial vegetation species was
imperfectly detected (detection probabilities ranged from 0.22 to 0.83). While focussed in the Australian rangelands, the
implications of this study are far reaching. Inferences drawn from systematic vegetation surveys that fail to identify and
account for non-detection errors should be considered potentially flawed. The identification of this problem in vegetation
surveying is long overdue. By comparison, non-detection has been a widely acknowledged, and dealt with, problem in fauna surveying
for decades. We recommend that, where necessary, vegetation survey methodology adopt the methods developed in fauna surveying
to cope with non-detection errors. 相似文献
8.
9.
10.
Wind energy has been the fastest growing renewable energy technology for more than a decade. However, the visual impacts of wind farms are still one of the most controversial effects of wind energy development. Photomontage visualisations are frequently used in Visual Impact Assessments2 (VIA) to give a sense of scale of the proposed development. Yet visualisations in VIAs are often perceived to underestimate the scale and magnitude of the visual impact of wind turbines. The aim of this multiphase mixed methods study is to explore the perceived accuracy of images that represent the visual impacts of both onshore and offshore wind farms. Field visits and data from a public survey are used to assess the accuracy of visualisations and to examine the effect of camera lens focal length on perception of scale of wind turbines. Results show that panoramic photomontages are perceived as the least accurate, while images taken at 75 mm focal length in full frame format are perceived as the most accurate form of representation of the scale and visual impact of wind turbines. These findings imply that the panoramic visualisation technique, which has been used for decades to predict the scale of wind turbines in VIAs, is ineffective in predicting accurately the visual impact of wind farms, and an alternative predictive technique is needed. For wind farm visualisations the use of 75 mm full frame image format is recommended in order to improve the accuracy, enable better informed decision making and avoid the loss of credibility of visualisations and VIAs. 相似文献
11.
In the paper water supply profile of Turkey was examined. In this scope, the questionnaire survey conducted by Turkish Statistical Institute in 2004 to investigate annual amount of water abstracted to drinking water networks by type of resources in 81 provinces was evaluated. In the questionnaire, sources were grouped under five categories as spring, (artificial) lake, river, reservoir and well. Due to the complex and multivariate characteristics of the data sets, to replace a large collection of variables with a smaller number of factors the statistical method "factor analysis" was performed. Results revealed that, water supply systems in the country were mainly governed by groundwater sources (well and/or spring). However, in the northeastern part of the country, rivers were allocated for drinking water supply. On the other hand, reservoir dependent cities were densely located in Marmara, Central Anatolia and Southeast Anatolia Regions. This study showed that statistics based classification methods assist decision makers to extract information from multidimensional complex data sets representing environmental conditions. 相似文献
12.
13.
The effect of various types of cement dust on the behaviour of sulphur dioxide in the air was investigated on model systems in different experimental conditions.Experiments were carried out with PC-15z-45s (Portland-blast furnace cement containing 15% blast furnace slag), PC-25p-35s (Portland-pozzolan cement containing 25% pozzolan) and EFD (electrofilter dust).EFD most effectively removed SO2 from the air stream. The next efficacious was PC-15z-45s, whereas PC-25p-35s was the least efficient. The efficacy of cement dusts for SO2 removal from the air stream depended on their chemical and granulometric composition and in particular on the size of specific surface.The rate of reaction was also influenced by experimental conditions—relative humidity, the length of contact, that is, the flow rate of gaseous mixture through the reactor, and the amount of cement dust.The experimental data show that in the contact between SO2 and cement dust catalytic oxidation of SO2 to sulphates takes place. Sulphates remain bound to the surface, from which they cannot be thermally desorbed, but can be released by extraction in the Soxhlet apparatus. 相似文献
14.
Fazel Abdolahpur Monikh Mehdi Hosseini Shirin Rahmanpour 《Environmental monitoring and assessment》2014,186(3):1575-1582
Polychlorinated biphenyl and polycyclic aromatic hydrocarbon concentrations in the hepatopancreas of blue swimming crab (Portunus pelagicus) from the north Persian Gulf were measured. In addition, the relationships between crab size (carapace width) and polychlorinated biphenyl (PCB) and polycyclic aromatic hydrocarbon (PAH) levels in hepatopancreas were investigated by linear regression analysis. Among the PCBs, congeners 110 and 153 were the most frequent and abundant. The results showed that, except in a few cases, significant relationships between PCB and PAH levels and crab size were positive. Comparison between male and female indicated that the average PCB16, 44, 153, and acenaphthylene, acenaphthene, and anthracene concentrations in hepatopancreas of male crab were found to be significantly higher than those found in the female crab. 相似文献
15.
Computer models have found widespread application in order to help elucidate and predict changes in environmental systems. One such application is the prediction of trace metal speciation in aqueous systems. This is achieved by solving a set of non-linear equations involving equilibrium constants for all the components in the system, within mass and charge balance constraints. In this study a comparison of the predicted uranium speciation from two computer programs, WHAM and PHREEQCI, is used to illustrate the effect variations in thermodynamic data can have on the models produced. Using the original thermodynamic data provided with the models, WHAM predicted the UO2(2+) ion as the major species (84%) while PHREEQCI predicted UO2(HPO4)2(2-) as the major species (86%). Substituting uranium data from the Nuclear Energy Agency Thermochemical Database project (NEA-TDB) into both programs produced similar results from each program, with UO2F+ predicted to dominate (68%) in a groundwater sample. Natural water samples often contain humic substances. The possible interaction of such substances with uranium was also modelled. The WHAM program includes a discreet site electrostatic humic substance model, however in order to use the PHREEQCI program to model humic substance interactions, a 'model fulvic acid' dataset was added to the program. These models predicted 85 to 98% uranium-humic substance species at neutral pH. This indicates that humic substances do need to be taken into account when modelling uranium speciation in natural water samples. 相似文献
16.
D. S. Jeffries D. C. L. Lam I. Wong R. M. Bloxam 《Environmental monitoring and assessment》1992,23(1-3):99-113
Changes in SO
inf4
sup2-
deposition predicted to occur in response to implementation of announced SO2 emission control programs in Canada and the U.S.A. have been used as input to water chemistry models thereby giving an estimate of the changes in lake acid neutralizing capacity (ANC) and pH that can be expected from these programs. Eastern Canada has been divided into 22 subregions for the purpose of this analysis. Relative to the current level (1982–86) of SO
inf4
sup2-
deposition (Scenario 1), the effect of the Canadian SO2 emission control program alone (Scenario 2) is compared to that obtained when controls are implemented throughout North America (Scenarios 3 and 4). SO2 emission reduction will effect a shrinkage of the high wet SO
inf4
sup2-
deposition field in NE North America such that under Scenario 4 conditions, almost no area will remain in Canada that receives >20 kg ha-1 yr-1. The greatest decrease in deposition and resulting change in lake chemistry occurs in southern Ontario and southwestern Quebec. ANC distributions shift to higher concentrations and the percentage of lakes having pH<6 decreases in these areas. The Atlantic Provinces will obtain only a minor benefit from the control programs, i.e. experiencing only a small decrease in deposition and improvement in water quality. High sensitivity of the terrain in many parts of Atlantic Canada means that large numbers of lakes will remain acidic (i.e. ANC<0) and/or have pH<6 (an important biological threshold) even after full implementation of the current plans for SO2 control in Canada and the U.S. 相似文献
17.
18.
Vladimira Vadjić Mirjana Gentilizza Janko Hršak Ivan Eškinja 《Environmental monitoring and assessment》1991,18(3):163-171
The effect of metals and ammonia on the relationship between mass concentrations of sulphur dioxide and sulphate in the air was studied near an aluminium plant over a 1-year period. Sulphur dioxide, sulphates and ammonia in the air as well as metals (Pb, Fe, Mn, Zn, Cu, Cd and Al) in the deposit were measured at four measuring sites.The levels of mass concentrations of SO2 were low at all measuring sites while the levels of mass concentrations of sulphates in the air and concentrations of metals in the deposit were high. The levels of ammonia were found to decrease in relationship to the distance from the source of pollution.The relationship between the mass concentrations of sulphate and SO2 can be described by the equation y=ax
b
;where y is the percentage of sulphate sulphur in the total sulphur (sulphate and SO2) and x is the mass concentration of the total sulphur in the air. The values of the coefficients a and b are characteristic of individual areas.As the results show the coefficients a and b obtained at a measuring site close to the plant and outside the urban area are characteristic of an industrial area. At control sites in the urban area the coefficients are characteristic of an urban area. At the measuring site close to the industrial zone and the centre of the urban area the interaction of the effects occurs. Therefore, the coefficient a is characteristic of an urban area and b of an industrial one. 相似文献
19.
20.
In this paper the effect of temperature and NaCl concentration on the kinetic method of toxicity determination using Vibrio fischeri was studied for 50 ppm Zn(2+). This work shows that both NaCl concentration and temperature affect the kinetics of toxicity as well as the luminescence of the bacteria, and hence these are important factors that need to be considered in the development of a miniaturised portable instrument. Furthermore, this work shows that the conditions for which the kinetic test was most sensitive, i.e. exhibited the greatest response, were 23 degrees C and 2% NaCl. However, at these conditions small variations in temperature and NaCl concentration could lead to great errors in the results. Thus 12.5 degrees C and 2% NaCl are preferred as at these conditions the obtained results are more robust. Although at the latter conditions the toxicity rate constant was found to be 5.5 times less than that for 23 degrees C, the value is comparable to that obtained for 15 degrees C. From the data available it was also found that the temperature dependence of the toxicity rate fits the Arrhenius equation, in a behaviour similar to that of simpler chemical reactions. 相似文献