Distribution of chromium, cadmium, nickel and lead in agricultural soils collected from Kazanli-Mersin, Turkey

This study reports total levels of chromium, cadmium, nickel and lead in the agricultural land adjacent a factory producing chromate compounds in Kazanli-Mersin. Surface soil samples were collected from fields around the factory as well as from fields farther away to measure contamination due to aerial transportation and deposition of dust produced in the industrial process. Heavy metals in soil were extracted using wet digestion, and concentrations were measured by atomic absorption spectrophotometry. The concentrations were compared with Turkish maximum allowable concentration values. The metal concentrations averaged 80, 0.14, 228 and 431mg1kg^-1 for chromium, cadmium, nickel and lead, respectively. Soil samples contaminated with chromium were mainly found 500–20001m from the factory and decreased with increasing distance from the factory. Elevated chromium and nickel concentrations were determined in the soils around the factory, especially to the northwest (prevailing wind) and west. Lead concentrations exceeded the limit in only roadside soils (4000 and 50001m to the west), but tended to increase in the vicinity of industrial activity (especially in the west, the northwest and the north). The cadmium concentration did not exceed the limit and was within the normal range for soils.     

Aluminium accumulation in Pteris cretica and trace element uptake in vegetation growing on an abandoned aluminium smelter site in Knoxville, TN, USA

Smokey Mountain Smelters in Knoxville, Tennessee USA is an abandoned aluminium smelter where smelter waste (slag) was dumped on site. ICP analyses indicated the highest slag metal concentrations were 223,000 mg kg⁻¹ Al, 281 mg kg⁻¹ As, 132 mg kg⁻¹ Se, and 2910 mg kg⁻¹ Cu. Metal uptake was quantified in plants growing on slag. Our data indicates that P. cretica accumulates Al in high concentrations, but not As, when grown in slag. Metal concentrations in vegetation grown on slag were lower than controls grown in uncontaminated soil, suggesting low metal availability or root exclusion mechanisms.     

Measurement of atmospheric particles and anionic species across central Taiwan

The ambient air concentrations and fluxes of various anionic species were sampled by MOUDI, TSP and dry deposition plates at a traffic sampling site in Taichung, central Taiwan. In the sampling period, from September to December 2000, the ambient air particle concentrations (PM₁, PM_2.5, PM₁₀ and TSP) were lower in the September than in the other three months (October to December). The reason is that the northwest wind brought more particles (diameter less than 10 μm) and the higher wind speed caused higher dry deposition fluxes and TSP concentrations in the last three months. The anion species percentages of TSP were 0.24%, 13.7%, 0.52%, 12.0%, 18.9'% and 54.6% for F^-, Cl^-, Br^-, NO₂^-, NO₃^- and SO₄^2-, respectively. The results revealed that SO₄^2-, NO₃^-, Cl^- and NO₂^- were the dominant species at the traffic sampling site. The ion-size distributions of Cl^-, NO₂^- and NO₃^- were unimodal, the main peak being between 3.2 and 5.6 μm. In contrast, the size distribution of SO₄^2- was bimodal, with the main peaks in the particle size ranges 0.32.0.56 μm and 3.2.5.6 μm. The ambient average particle dry deposition flux was 6.28 μg/m2/s, and the dry deposition fluxes were 0.01, 94.6, 0.05, 34.7, 72.2 and 376.4 ng/m2/s for F^-, Cl^-, Br^-, NO₂^-, NO₃^- and SO₄^2-, respectively. The dry deposition velocities were 3.10, 0.03, 3.67, 0.05, 1.54, 2.03 and 3.67 cm/s for F^-, Cl^-, Br^-, NO₂^-, NO₃^- and SO₄^2-, respectively.     

Measurement of atmospheric fluxes of radionuclides at a UK site using both direct (rain) and indirect (soils) methods

Direct measurements of radionuclide tracers are useful tools for correcting proxy fluxes that are subject to post depositional changes. An analytical methodology was designed for the measurement of ²¹⁰Pb and ⁷Be in rainwater. Atmospheric inputs of the radionuclides to Cumbria (UK) were recorded. Rainwater fluxes were then compared with measurements from soil cores. The annual deposition from April 1997 to March 1998 of ²¹⁰Pb and ⁷Be was 165 ± 8 Bq m^-2 and 3912 ± 120 Bq m^-2, respectively, compared to an indirect ²¹⁰Pb flux of 148 ± 7 Bq m^-2 yr^-1 calculated from soil core records.     

Lead and zinc content of cows' milk affected by varying traffic density

This study was conducted to investigate the influence of vehicle emissions on zinc and lead content of cow's milk, grazing at 15 different locations near to roadsides in Sakarya, Turkey. The results obtained for zinc were between 1262 μg kg⁻¹ and 6566 μg kg⁻¹. An acceptable range of zinc content from various sides confirmed the absence of possible toxicological risks in this region. The lead levels ranged from 3.24 μg kg⁻¹ to 80.69 μg kg⁻¹. The levels of lead in milk samples collected from roadside pastures were higher than the regulatory limits and pose a health risk.     

Sampling errors in the study of acid gases and anion species in atmospheric aerosols

Atmospheric acid aerosols were sampled by two annular denuder systems (ADS) and a micro-orifice uniform deposit impactor (MOUDI) at a traffic site in central Taiwan. Theoretical analysis showed that the relative artifact for HNO₃ gas sampling was about 0.53 when the initial HNO₃ concentration was under 0.2 µg/m³ and should be considered carefully. The concentrations of gaseous acid at the traffic sampling site were higher than those in the other study. The size distributions of acid aerosols were unimodal for Cl^-, NO₂^-, and NO₃^-, and bimodal for SO₄^2-. The dominant acid ions in particles less than 18 µm were SO₄^2-, NO₃^-, NO₂^- and Cl^-.     

Monitoring of phytoplankton biomass and nutrients in a polluted stream

The spatial and temporal variations in the concentrations of nutrients (NH₄⁺, NO₂⁻, PO₄³⁻, SiO₄⁻) and chlorophyll a were monitored simultaneously in a slow-flowing watercourse (Saricay Stream, Turkey), which runs in a rural–urban gradient. Chlorophyll a concentrations ranged between 0.044 μg l^-1 and 206.15 μg l^-1 and, in general, the higher concentrations of chlorophyll a and ammonium were measured downstream of the raw sewage outfalls. Nitrate was by far the most abundant form of inorganic nitrogen, and its concentration ranged between 411.71 μM and 87.25 μM. Silicates and phosphates were always potentially limiting to biomass relative to nitrogen. Agricultural run-off and point discharges from urban sources greatly affected the chemical composition of the water in the Saricay Stream and drove the system towards eutrophication.     

Effects of organic loading and oil-grease for the treatment of edible oil effluent in a pilot-scale upflow anaerobic sludge blanket process

In this study, Karadeniz Birlik Dogan Erdil vegetable oil factory, Elazig City, Turkey, was selected as representative of this sector. During the first part of the test programme, the quality of raw effluents was investigated. The removals of COD and oil-grease were above 85% at organic loadings between 1.62 and 7.83 kg COD m^-3 d^-1 at hydraulic retention times of 2.0 and 2.5 days. The conversion rates of the removed COD into methane gas were between 0.24 and 0.361 g CH₄ (g COD)^-1.     

Differential water quality in confined and free-flowing water bodies, Lebanon

Integrated management of water resources is a major critical issue to be addressed in combating water stress in developing countries, such as Lebanon. At present, surface water is not properly used in Lebanon. This emphasises the importance of assessing surface water quality as a projected means to increase water availability. This study involves two different water bodies, the freely flowing Nahr-Ibrahin River and the Qaraaoun Reservoir, an impoundment of the Litani River. Water samples were collected from 16 chosen sites of each water body at four different dates during the dry season. Measured water parameters were temperature, pH, conductivity, BOD, HCO₃^-, Ca²⁺, Mg²⁺, Cl^-, SO₄^2-, PO₄^3-, NO_{3-, NH3, Fe, Mn, Zn, Pb, and Cd. Statistical analysis of the data revealed significant differences in water quality. The differences could be attributed to the fact that whereas the Qaraaoun reservoir is receiving domestic waste discharges that lead to an increase in the CO2 content and a pH decrease, the Nahr-Ibrahim River is influenced by agricultural runoffs and industrial discharges that increase the pH values. Consequently, the water metal speciation of the two water bodies was different. The study indicated that the differential quality of the two water bodies could be attributed to the nature of the water resources and exposure to contaminants. This is crucial in recommending intervention studies to protect quality and promote the role of surface water use, as an integrated component of water management in Lebanon.}     

Temporal variability of the precipitation chemistry in the forest area of Istanbul, Turkey

The chemical compositions of precipitation show temporal and spatial variability. It is important to determine the temporal variation of the chemical composition of rainwater for estimating the impacts of pollutants on the forest. In this study, the 34 rainwater samples are collected using, for the first time, the specially designed collectors between November 1997 and March 1998 in Istanbul University, Faculty of Forestry at Bahcekoy, Istanbul in Belgrad Forest. The sequentially collected samples are analysed for major ions concentrations and pH estimations. The pH values for all samples vary from 5.1-7.6. In general, the concentration of all rainwater samples decrease with time. Furthermore, it is estimated that the average Ca²⁺) (1943.0 µeql^-1) and SO₄^2- (887.3 µeql^-1) concentrations are extremely high during the first ten minutes of the precipitation event.     

Adsorption of molybdate ion by natrolite and clinoptilolite-rich tuffs

Natural clinoptilolite-rich tuffs and natrolite from Iranian deposits and their different ion-exchanged forms were used for the adsorption of ⁹⁹Mo as molybdate ion. The effect of pH, contact time, initial molybdate concentration, and some cationic and anionic interferences were also studied. To investigate the selectivity of zeolites and their exchanged forms, the isotherms of adsorption were constructed at room temperature. Desorption experiments were carried out to examine the ability of zeolite to retain adsorbed molybdate. It was concluded that molybdate could be considerably adsorbed by some of the exchanged forms of the zeolites (Ag⁺, Cd²⁺ and Pb²⁺ exchanged forms) whereas the uptake by the natural forms was negligible.     

Electric arc furnace flue dust: characterisation and toxicity with Photobacterium phosphoreum

During steelmaking in electric arc furnaces (EAFs), 10 to 15 kg of dust, consisting of a mixture of zinc, lead and iron oxides and to a lesser degree chrome, nickel and manganese, is generated per ton of steel product. In many countries, the disposal of EAF dust in landfill sites is regarded as an environmental hazard, since toxic metals may be leached into drinking water supplies. This work gives the results of a study of the physical, chemical, mineralogical and toxicological properties of dust produced in Spanish EAFs. EC50 concentrations (Microtox Assay) are determined by studying the incubation time of the bacteria and an exponential ratio is then established between EC50 values and the heavy metal content of the leachates which are obtained (US EPA protocol). The relationship between the pH at which the metals are extracted and their ecotoxicity is also studied. Average EC50 values of 1 250 mg 1^-1 are found when the heavy metals are extracted at a pH of 4-4.5.     

Analysis of radioisotope concentrations in sediments using γ-ray spectrometry

The concentrations of some naturally occurring radioisotopes in sediments of the Kufranja river basin in Jordan were determined by means of γ-ray spectrometry with precise calibration of energy and efficiency. The nuclides' concentrations were found by either direct measurement of their activities, as in the case of ²²⁶Ra and ⁴⁰K, or through the measurements of the activities of their daughters with short half-lives, as in the case of ²³⁸U and ²³²Th. Furthermore, the hazard index, the radium equivalent activity and the absorbed dose rate for each of these nuclides had been calculated. It turned out that the concentrations of radioisotopes in sediments of the studied area were below the standard limits and the human effective dose equivalent ranged from 23.8 to 35.7 μSv/yr.     

Nitrification of centrate from dewatering of anaerobically digested sludge

Nitrification of anaerobically digested sludge centrate was studied in bench-scale suspended growth and fixed film enhanced suspended growth systems at temperatures of 10.5-28.5°C and pH values of 6.0-9.1. Nitrification followed zero-order kinetics in both systems, and ammonia removals in excess of 99% were observed. The temperature dependency of the suspended growth nitrification rate observed under not fully acclimated biomass conditions at pH between 6.8 and 8.5, was expressed as k_T = k₂₀θ^T-20where k₂₀ and θ were found to be 0.34 mg NH₃-N/MLVSS-d and 1.033, respectively. The nitrification rate in the fixed film enhanced suspended growth system involving styrofoam pads ranged from 0.11 to 0.13 mg NH₃-N/mg MLVSS-d at temperatures of 21.5-25°C and pH values of 7.8-8.6. The process contained suspended solids in the range of 10-20 mg/l.     

Preliminary studies of the oxidation of arsenic(III) by potassium ferrate

The Pollutant Standards Index (PSI) was developed in the USA to give the public an overall assessment of the air quality on a regular basis. Currently, the PSI does not include the synergistic effects of the major air pollutants. Synergism applies when the damage caused by two or more pollutants, either to human health or property, is greater than the effect or damage caused by each individual pollutant acting alone. The purpose of this work is to develop a methodology that would take into account the synergistic effects of the priority air pollutants, and therefore give us a better understanding of the severity of the damage caused by these pollutants. The equation suggested is D(P1,P2,P3,P4,P5) = C1^A C2^B C3^C C4^D C5^E. If it is assumed that the weight constants A to E are equal to one (all pollutants contribute equally to the damage), the equation becomes D (P1,P2,P3,P4,P5) = K·C1·C2·C3·C4·C5 where the constant K represents a conversion factor between the PSI scale and the new Synergistic Theory scale. The value of K is to be determined experimentally by finding the threshold value in the synergistic scale and dividing the threshold value of the PSI scale (100) by this number K = 100/SSC1_threshold where SS_threshold is the Synergistic Scale threshold value.     

The benzene problem: impact of three-way catalyst technology: potential for further improvement

Chemical ionisation mass spectrometry (CI-MS) was applied to study the benzene emission characteristics of a TWC-vehicle at a time resolution of one Hertz. Three important operating conditions with increased emissions were identified: at vehicle start; at extended stop-and-go situations; and whenever a catalyst-induced benzene formation occurs. The cold start influence was detectable for about 200 seconds of driving corresponding to a distance of 1.2 km. At hot engine/catalyst mean pre- and post-catalyst emission rates of 25–150 mg km^-1 and 0.1–135 mg km^-1 were determined. Catalyst conversion varied from 0.07 to >0.99. Even negative conversion efficiencies were observed at several occasions, indicating that benzene can be formed de novo in a TWC. It is of importance to lower benzene emissions at these critical operating conditions to further reduce ambient air levels in cities and with it the cancer risk for large proportions of our population.     

Computational spectroscopic study of copper, cadmium, lead and zinc interactions in the environment

Molecular modelling has been used to investigate the interactions of various heavy metals, in order to understand and possibly to control the nature and behaviour of metals, especially in the aquatic environment. The interactions of copper, cadmium, lead and zinc with organic acids were studied using density functional theory (DFT) calculations. Carboxylic acid was used as a model molecule. The structure of each metal carboxylate was optimized and the vibrational spectrum calculated. The results indicate that there is a shift in the calculated v_S(C=O) of metal carboxylates compared with that of carboxylic acid. It was also found that hexaaqua structures of both cadmium and zinc are stable whereas those of copper and lead are not. Furthermore, dipole moment calculations indicate that cadmium carboxylate dihydrate is more representative of cadmium interactions in the aquatic environment. Moreover, hexaaquo cadmium could further interact with surrounding molecules in the aquatic environment.     

Measurement of ammonia emissions using various techniques in a comparative tunnel study

A field-based intercomparison study for ammonia measurements was conducted using seven analytical methods. It included sulphuric acid impinger, citric acid denuder, differential optical absorption spectroscopy (DOAS), Fourier transform infrared spectroscopy (FTIR), photoacoustic spectroscopy (PAS), and continuous aqueous extraction followed by measurement of conductivity (Airrmonia). Measurements were done at the entrance and the exit of the Gubrist highway tunnel near Zurich, Switzerland. For DOAS, FTIR, PAS and Airrmonia, 24 hour means were calculated based on a time resolution of 10 minutes. At the tunnel exit, all 24 hour averages were within 13%, and the continuous data of the time-resolved methods agreed well. At the tunnel entrance, a slightly reduced method comparison included four methods, and daily mean values agreed within 23%. Ammonia emission factors, based on 4 weeks of continuous measurements with the Airrmonia, were 31 ± 4 mg km^-1 for light-duty vehicles and 14 ± 7 mg km^-1 for heavy-duty vehicles.     

Source contribution of atmospheric aerosols in Bangkok metropolitan area by CMB8 receptor model

The CMB₈ model was applied for source apportionment of particulate matter in Bangkok area. The 24 h of ambient data were collected and analysed for elemental composition during December 1996 to January 1997 by high volume air samplers at a station in Bangkok, Thailand. Seven source profiles and the average mass concentrations of 42 ambient data were used to run the chemical mass balance (CMB₈) model. The source apportionment by CMB₈ gave similar results comparing with factor analysis – multiple regression (FA–MR) model of the same data. The results revealed that major sources of particulate matter in Bangkok were: soil (33%), road dust (33%) and automobile (15%). The minor source contributions were: sea salt (4.34%), refuse incineration and biomass burning (0.84%), steel mill (0.62%) and fuel oil combustion (0.35%). The lack of source profile for biomass or open burning in Bangkok resulted in much lower predicted contribution of this source when compared to that from FA–MR. When apply this CMB₈ model with daily ambient data, the result revealed that one fourth of daily CMB₈ source apportionment had high value of ² (>4). These exceedance values of Chi² also point out that one of the selected sources (biomass burning) may not be the true contributing sources. Presumably, accurate biomass burning source profile is needed to improve the CMB calculation of source contributions for particulate matter in Bangkok metropolitan area.     

Synthesis of Na-Pc zeolite from perlite and study of its ability to remove cyanide from liquid wastes

With the aim of the economic upgrading of natural resources, this investigation examined the hydrothermal synthesis of zeolite from perlite, and the ability of the synthetic zeolite to adsorb and retain cyanide. The hydrothermal treatment of perlite with aqueous sodium hydroxide results in the formation of Na-P_c zeolite. The cation-exchange capacity of zeolite for zinc, copper and silver was respectively 2.26, 1.86 and 2.44 meq g^-1. The exchange was incomplete, but equilibrium was rapidly attained. Cyanide adsorption isotherms, constructed at three different temperatures, showed that the zeolite was very selective for cyanide. The solubility products of the cyanide precipitate and the exchange capacity of zeolite for individual cations governed the adsorption capacity of the zeolite. The method also remains selective in the presence of some other anions. Kinetic data for cyanide desorption in water and sodium chloride solution indicated that zeolite retains most of the adsorbed cyanide.