Aluminium accumulation in Pteris cretica and trace element uptake in vegetation growing on an abandoned aluminium smelter site in Knoxville, TN, USA

Smokey Mountain Smelters in Knoxville, Tennessee USA is an abandoned aluminium smelter where smelter waste (slag) was dumped on site. ICP analyses indicated the highest slag metal concentrations were 223,000 mg kg⁻¹ Al, 281 mg kg⁻¹ As, 132 mg kg⁻¹ Se, and 2910 mg kg⁻¹ Cu. Metal uptake was quantified in plants growing on slag. Our data indicates that P. cretica accumulates Al in high concentrations, but not As, when grown in slag. Metal concentrations in vegetation grown on slag were lower than controls grown in uncontaminated soil, suggesting low metal availability or root exclusion mechanisms.     

Manganese levels and chemical fractionation in street dust in South Africa

Mn in street dust and soil from selected roads was studied to assess the contribution of combustion of vehicular methylcyclopentadienyl manganese tricarbonyl (MMT) to Mn levels and distribution in Pretoria, South Africa. Total Mn concentrations ranged from (329.1-863.9 μg g⁻¹) for dust and (215.8-450.6 μg g⁻¹) for soil. These values were significantly higher than the mean value (278.9 μg g⁻¹) found on soil from a rural environment in Pretoria. The lowest value for the dust sample (329.1 μg g⁻¹) was close to the mean background level of 330 μg g⁻¹ for Mn in soil. Mn distribution in the samples was most in the residual fraction (178.18-487.50 μg g⁻¹) and (140.76-293.40 μg g⁻¹) for dust and soil respectively. Mn in the other fractions were 56.45-202.60 μg g⁻¹ oxides, 90.71-45.34 μg g⁻¹ organic, 45.36-12.65 μg g⁻¹ carbonates and 1.98-6.72 μg g⁻¹ exchangeable for dust and 32.54–167.31 μg g⁻¹ oxides, 34.23–70.45 μg g⁻¹ organic, 10.98-30.45 μg g⁻¹ carbonate and 1.0-4.87 μg g⁻¹ exchangeable for soil. Major source of Mn determined was mainly from the combustion of vehicular MMT.     

Lead and zinc content of cows' milk affected by varying traffic density

This study was conducted to investigate the influence of vehicle emissions on zinc and lead content of cow's milk, grazing at 15 different locations near to roadsides in Sakarya, Turkey. The results obtained for zinc were between 1262 μg kg⁻¹ and 6566 μg kg⁻¹. An acceptable range of zinc content from various sides confirmed the absence of possible toxicological risks in this region. The lead levels ranged from 3.24 μg kg⁻¹ to 80.69 μg kg⁻¹. The levels of lead in milk samples collected from roadside pastures were higher than the regulatory limits and pose a health risk.     

Estimation of dry deposition of atmospheric nitrogen to coastal waters of de la Plata River in front of Buenos Aires city

The deposition of atmospheric nitrogen (N) to surface waters of de la Plata River downwind of Buenos Aires city has been estimated using atmospheric dispersion-deposition models. The CALPUFF model has been applied to point source emissions and the DAUMOD-RD model has been developed to evaluate the area source emission contributions. Annual N dry deposition is 31,763 kg-N yr⁻¹ (≈ 18 kg-N km⁻² yr⁻¹). Nitrogen dioxide contribution to this value is 54% and nitric acid contribution is 46%. The maximum monthly N dry deposition fluxes vary between 7 kg-N km⁻² month⁻¹ (in February) and 13 kg-N km⁻² month⁻¹ (in December).     

Air pollution modelling of the Calabrian pine forests withered by the Yatagan thermal power plant, Turkey

The emissions from the chimney of the Yatagan thermal power plant have caused a 3050-hectare forest to wither. Such air pollutants as sulfur dioxide, nitrogen oxides and fly ash are carried towards the Bencikdagi Calabrian pine forests on the prevailing north-east winds. To study these effects, the Q-Basic computer program developed for the Gaussian puff model was used with meteorological data provided by the Yatagan Meteorological Office and the pollutant loads formed by the thermal power plant. In the grid system on the map showing the surroundings of the thermal power plant, the concentrations of the pollutants in each grid square were determined. The Yatagan plant has three units containing 9000 mg/m3 sulfur dioxide, 1800 mg/m3 nitrogen oxides and 680 mg/m3 fly ash in its chimneys. The minimum pollutant emissions were found to be 100 μg/m3 SO₂, 20 μg/m3 NO_x2, and 77 μg/m3 NO_x     

Mechanism and kinetics of Zn(II) removal from wastewater by immobilised beads of SRB sludge

The treatment of Zn(II)-bearing wastewater by immobilised Sulfate Reducing Bacteria (SRB) sludge beads of inner cohesive nutrient source was investigated, by which the traditional problems in SRB methods were resolved. The mechanism and kinetics model on Zn(II) removal were studied. The results showed that SO₄²⁻ was reduced to S²⁻ on the surface of SRB sludge beads, and Zn(II) precipitated outside beads. The effect of internal diffusion could be neglected, and the chemical reaction was the rate determining step. The reaction kinetics was followed by Micaelis-Menten formula, and the constants, K_s and v_max were 8.99 mg⋅L⁻¹ and 0.018 mg⋅L⁻¹⋅s⁻¹, respectively.     

Heavy metal speciation and mobility assessment of arid soils in the vicinity of Al Ain landfill, United Arab Emirates

Sixty-four surface soil samples taken in the vicinity of Al Ain landfill were analysed for cadmium, chromium, copper, nickel, lead and zinc by inductively coupled plasma spectroscopy. Extraction techniques were used to establish the association of the total concentrations of the six metals in the soil samples with their contents in the exchangeable, carbonate, iron/manganese oxides, and residual fractions. In the investigated soils, the recorded concentrations were as follows: 0.043 mg kg^-1 for cadmium, 19.1 mg kg^-1 for chromium, 53.3 mg kg^-1 for copper, 60 mg kg^-1 for nickel, 13.7 mg kg^-1 for lead, and 117 mg kg^-1 for zinc. Cadmium, chromium, nickel, lead and zinc concentrations in the investigated soil samples reflect the natural background values in shale, whereas copper is slightly enriched. I-geo (geoaccumulation index) values of the metals in the soils under study indicate that they are uncontaminated with cadmium, chromium, nickel, lead and zinc, but contaminated to moderately contaminated with copper. Heavy metal contents in the sediments were found to be significantly influenced by different physico-chemical parameters. The effect of these parameters can be arranged in the following order: clay fraction > carbonate fraction > silt fraction > organic matter fractions. A sequential extraction procedure showed that the total concentrations of the heavy metals are largely bound to the residual phase (retained 71.4% of cadmium, 77.8% of chromium, 75% of copper, 47% of nickel, 62.8% of lead, and 75.8% of zinc). A likely sequence of mobility in the investigated soils is as follows: chromium > lead > nickel > cadmium > zinc > copper.     

Measurement of atmospheric fluxes of radionuclides at a UK site using both direct (rain) and indirect (soils) methods

Direct measurements of radionuclide tracers are useful tools for correcting proxy fluxes that are subject to post depositional changes. An analytical methodology was designed for the measurement of ²¹⁰Pb and ⁷Be in rainwater. Atmospheric inputs of the radionuclides to Cumbria (UK) were recorded. Rainwater fluxes were then compared with measurements from soil cores. The annual deposition from April 1997 to March 1998 of ²¹⁰Pb and ⁷Be was 165 ± 8 Bq m^-2 and 3912 ± 120 Bq m^-2, respectively, compared to an indirect ²¹⁰Pb flux of 148 ± 7 Bq m^-2 yr^-1 calculated from soil core records.     

Monitoring of phytoplankton biomass and nutrients in a polluted stream

The spatial and temporal variations in the concentrations of nutrients (NH₄⁺, NO₂⁻, PO₄³⁻, SiO₄⁻) and chlorophyll a were monitored simultaneously in a slow-flowing watercourse (Saricay Stream, Turkey), which runs in a rural–urban gradient. Chlorophyll a concentrations ranged between 0.044 μg l^-1 and 206.15 μg l^-1 and, in general, the higher concentrations of chlorophyll a and ammonium were measured downstream of the raw sewage outfalls. Nitrate was by far the most abundant form of inorganic nitrogen, and its concentration ranged between 411.71 μM and 87.25 μM. Silicates and phosphates were always potentially limiting to biomass relative to nitrogen. Agricultural run-off and point discharges from urban sources greatly affected the chemical composition of the water in the Saricay Stream and drove the system towards eutrophication.     

Impact of plant harvesting on nitrogen and phosphorus removal in constructed wetlands treating agricultural region wastewater

Agricultural region wastewater near Dianchi Lake, China increases eutrophication of the lake. Thus nitrogen and phosphorus removal from the wastewater by Phragmites australis and Zizania caduciflora in two Constructed Wetlands (CWs) was studied. South CW and North CW have areas of 2800 and 4200 m², respectively. From January 2003 to December 2003, the input loads were 5.31 (2.89) and 0.68 (0.37) kg P ha⁻¹ day⁻¹ in SCW (NCW). The removal amounts of N and P via plant harvesting accounted for 32 (58) and 37 (51)% of the corresponding removal load in SCW (NCW).     

Measurement of atmospheric particles and anionic species across central Taiwan

The ambient air concentrations and fluxes of various anionic species were sampled by MOUDI, TSP and dry deposition plates at a traffic sampling site in Taichung, central Taiwan. In the sampling period, from September to December 2000, the ambient air particle concentrations (PM₁, PM_2.5, PM₁₀ and TSP) were lower in the September than in the other three months (October to December). The reason is that the northwest wind brought more particles (diameter less than 10 μm) and the higher wind speed caused higher dry deposition fluxes and TSP concentrations in the last three months. The anion species percentages of TSP were 0.24%, 13.7%, 0.52%, 12.0%, 18.9'% and 54.6% for F^-, Cl^-, Br^-, NO₂^-, NO₃^- and SO₄^2-, respectively. The results revealed that SO₄^2-, NO₃^-, Cl^- and NO₂^- were the dominant species at the traffic sampling site. The ion-size distributions of Cl^-, NO₂^- and NO₃^- were unimodal, the main peak being between 3.2 and 5.6 μm. In contrast, the size distribution of SO₄^2- was bimodal, with the main peaks in the particle size ranges 0.32.0.56 μm and 3.2.5.6 μm. The ambient average particle dry deposition flux was 6.28 μg/m2/s, and the dry deposition fluxes were 0.01, 94.6, 0.05, 34.7, 72.2 and 376.4 ng/m2/s for F^-, Cl^-, Br^-, NO₂^-, NO₃^- and SO₄^2-, respectively. The dry deposition velocities were 3.10, 0.03, 3.67, 0.05, 1.54, 2.03 and 3.67 cm/s for F^-, Cl^-, Br^-, NO₂^-, NO₃^- and SO₄^2-, respectively.     

Sampling errors in the study of acid gases and anion species in atmospheric aerosols

Atmospheric acid aerosols were sampled by two annular denuder systems (ADS) and a micro-orifice uniform deposit impactor (MOUDI) at a traffic site in central Taiwan. Theoretical analysis showed that the relative artifact for HNO₃ gas sampling was about 0.53 when the initial HNO₃ concentration was under 0.2 µg/m³ and should be considered carefully. The concentrations of gaseous acid at the traffic sampling site were higher than those in the other study. The size distributions of acid aerosols were unimodal for Cl^-, NO₂^-, and NO₃^-, and bimodal for SO₄^2-. The dominant acid ions in particles less than 18 µm were SO₄^2-, NO₃^-, NO₂^- and Cl^-.     

Differential water quality in confined and free-flowing water bodies, Lebanon

Integrated management of water resources is a major critical issue to be addressed in combating water stress in developing countries, such as Lebanon. At present, surface water is not properly used in Lebanon. This emphasises the importance of assessing surface water quality as a projected means to increase water availability. This study involves two different water bodies, the freely flowing Nahr-Ibrahin River and the Qaraaoun Reservoir, an impoundment of the Litani River. Water samples were collected from 16 chosen sites of each water body at four different dates during the dry season. Measured water parameters were temperature, pH, conductivity, BOD, HCO₃^-, Ca²⁺, Mg²⁺, Cl^-, SO₄^2-, PO₄^3-, NO_{3-, NH3, Fe, Mn, Zn, Pb, and Cd. Statistical analysis of the data revealed significant differences in water quality. The differences could be attributed to the fact that whereas the Qaraaoun reservoir is receiving domestic waste discharges that lead to an increase in the CO2 content and a pH decrease, the Nahr-Ibrahim River is influenced by agricultural runoffs and industrial discharges that increase the pH values. Consequently, the water metal speciation of the two water bodies was different. The study indicated that the differential quality of the two water bodies could be attributed to the nature of the water resources and exposure to contaminants. This is crucial in recommending intervention studies to protect quality and promote the role of surface water use, as an integrated component of water management in Lebanon.}     

Treatment of municipal wastewater by membrane bioreactor: a pilot study

The operational performance of a submerged hollow fibre Membrane Bio-Reactor (MBR) for treatment of municipal wastewater on pilot scale was investigated. The experimental results indicated that the removal efficiency for SS, COD, NH₄-N, turbidity, bacterium, iron (Fe²⁺) and Manganese (Mn²⁺) was 100%, 94.5%, 98.3%, 99.7%, lg6, 99%, 92.3%, respectively. The water quality of the effluent was quite good. The reclaimed water could be reused either directly or indirectly for municipal or industrial purposes. The MBR had a strong ability to resist loading shock and DO was a crucial factor to membrane fouling.     

Preliminary studies of the oxidation of arsenic(III) by potassium ferrate

The Pollutant Standards Index (PSI) was developed in the USA to give the public an overall assessment of the air quality on a regular basis. Currently, the PSI does not include the synergistic effects of the major air pollutants. Synergism applies when the damage caused by two or more pollutants, either to human health or property, is greater than the effect or damage caused by each individual pollutant acting alone. The purpose of this work is to develop a methodology that would take into account the synergistic effects of the priority air pollutants, and therefore give us a better understanding of the severity of the damage caused by these pollutants. The equation suggested is D(P1,P2,P3,P4,P5) = C1^A C2^B C3^C C4^D C5^E. If it is assumed that the weight constants A to E are equal to one (all pollutants contribute equally to the damage), the equation becomes D (P1,P2,P3,P4,P5) = K·C1·C2·C3·C4·C5 where the constant K represents a conversion factor between the PSI scale and the new Synergistic Theory scale. The value of K is to be determined experimentally by finding the threshold value in the synergistic scale and dividing the threshold value of the PSI scale (100) by this number K = 100/SSC1_threshold where SS_threshold is the Synergistic Scale threshold value.     

Dye wastewater treatment by using ceramic membrane bioreactor

Performance of a Micro-filtration Membrane Bioreactor (MMBR) for treatment of dye wastewater was investigated. The experimental results indicated that the removal efficiency for COD, TOC and colour was 85%, 85-90% and 70%, respectively, the effluent COD was below 70 mgl⁻¹ on average. Gel layer resistance of COD was 10%. Particle size distribution of sludge in MMBR was 1-150 μm, and the average particle diameter was 20-40 μm. The activity of dehydrogenase of activated sludge in MMBR was 36-42 mgTTC (gVSS) ⁻¹h⁻¹, while active dehydrogenase enzyme content was 7.95 mgVSS⁻¹.     

Temporal variability of the precipitation chemistry in the forest area of Istanbul, Turkey

The chemical compositions of precipitation show temporal and spatial variability. It is important to determine the temporal variation of the chemical composition of rainwater for estimating the impacts of pollutants on the forest. In this study, the 34 rainwater samples are collected using, for the first time, the specially designed collectors between November 1997 and March 1998 in Istanbul University, Faculty of Forestry at Bahcekoy, Istanbul in Belgrad Forest. The sequentially collected samples are analysed for major ions concentrations and pH estimations. The pH values for all samples vary from 5.1-7.6. In general, the concentration of all rainwater samples decrease with time. Furthermore, it is estimated that the average Ca²⁺) (1943.0 µeql^-1) and SO₄^2- (887.3 µeql^-1) concentrations are extremely high during the first ten minutes of the precipitation event.     

Treatment of distillery anaerobic effluent in a hybrid biological reactor

The treatability of anaerobic effluent from a molasses-based distillery was studied in a shaft-type hybrid bioreactor under purely suspended growth and hybrid system containing 5 mm tyre-tube beads. The Ks, k, Y and k found as 111.29 mg/l, 0.026/h, 0.4607 and 0.0040/h respectively. The maximum COD removal was 51.7% at a loading rate of 5.250 kg d⁻¹ m⁻³. The overall removal rate was 0.0431, 0.0452, 0.0484 and 0.053/h under 0, 10, 20 and 30 g/l of beads respectively. When attached biomass increased, the cell synthesis part of oxygen utilisation coefficient gradually decreased and that for endogenous respiration increased.     

Synthesis and characterisation of new cationic polyelectrolytes by inverse emulsion polymerisation and their application in activated sludge dewatering

Water soluble hydrophobically associated polyelectrolytes were copolymerised with dimethyl- [2-(2-methyl-acryloyloxy)-ethyl]-alkyl ammonium bromide (alkyl: propyl, hexyl, dodecyl) (DEAC_n) and acrylamide (AM) in inverse emulsion. Cationic hydrophobically modified polyacrylamides having different molecule weight and cationic degree were obtained by varying the total monomer concentration and DEAC_n/AM mole ratio. Polyelectrolytes were characterised by ¹H-NMR and ¹³C-NMR. The dewatering indexes, such as CST, settling rate and water content in sludge cake were investigated and used to evaluate the dewaterability and settleability of activated sludge conditioned by these polyelectrolytes. Afterwards, some characteristics of sludge floc, such as: floc size, sludge viscosity and floc strength were measured. The function of hydrophobic association in sludge conditioning was elucidated by comparing dewatering performances with these polyelectrolytes     

Effects of organic loading and oil-grease for the treatment of edible oil effluent in a pilot-scale upflow anaerobic sludge blanket process

In this study, Karadeniz Birlik Dogan Erdil vegetable oil factory, Elazig City, Turkey, was selected as representative of this sector. During the first part of the test programme, the quality of raw effluents was investigated. The removals of COD and oil-grease were above 85% at organic loadings between 1.62 and 7.83 kg COD m^-3 d^-1 at hydraulic retention times of 2.0 and 2.5 days. The conversion rates of the removed COD into methane gas were between 0.24 and 0.361 g CH₄ (g COD)^-1.