Environmental product attributes in end-of-life management in the UK. Part I: an end-of-life eco-declaration for waste IT and office equipment

The focus of this paper and its companion (Part II) is to identify producer responsibility associated with the proposed Waste from Electrical and Electronic Equipment (WEEE) Directive and the need for greater information about the environmental attributes of electrical and electronic equipment to facilitate end-of-life management of discarded products. Recently, a wide-ranging debate has started within the IT industry centred on the best way to define the exact nature of the information that needs to be supplied to recyclers by producers in order to comply with the proposed European Commission Directive. Using IT and office equipment as an indicative example, semi-structured telephone interviews were conducted with representatives of the UK electronics end-of-life management industry about the environmental attributes that are needed for compliance with the draft Directive. The results of this research indicate there is specific information about equipment that is required on a regular basis, the most important of which is centred on hazardous substances and materials contained in whole units, parts and components of that equipment. The content of an eco-declaration for end-of-life management of IT and office equipment derived from quantitative and qualitative interview data is presented.     

Inventory and substance flow analysis of polybrominated diphenyl ethers in the Nigerian transport sector—end-of-life vehicles policy and management

Recently, certain polybrominated diphenyl ethers (PBDEs) have been listed as persistent organic pollutants (POPs) in the Stockholm Convention. In this study, a preliminary material and substance flow analysis of commercial pentabromodiphenyl ether (c-PentaBDE) was conducted for motor vehicles—a major use sector for POP-PBDE in polyurethane (PUR) foam—for Nigeria. The methodology of the Stockholm Convention PBDE inventory guidance was used for the calculation of c-PentaBDE. Material/substance flow analysis was conducted applying the STAN software. The time frame for this analysis was 1980–2010, considering that this was the period when POP-PBDE-containing vehicles were largely imported into Nigeria.It is estimated that the approximately 19 million passenger cars imported from 1980 to 2010 contained ca. 270 t of POP-PBDEs in ca. 401,000 t of PUR foam. A major share of cars from the USA and only a small share of cars from Europe and Asia were impacted. This simplified material and substance flow of PUR foams and POP-PBDEs in motor vehicles demonstrated the potential for environmental/human contamination and pollution of recycling/reuse for Nigeria and other developing countries.The study developed the first preliminary inventory of end-of-life vehicles for Nigeria, following which the environment ministry has taken up the important issue of end-of-life vehicles management. Considering that a range of other pollutants are contained in vehicles (e.g. heavy metals, flame retardants, PCBs, chlorofluorocarbons, hydrofluorocarbons and waste oil), this initiated activity should finally lead to an integrated management of pollutants and resources from the transport sector.     

The Dismantling of End-of-Life Vehicles in Estonia Before Putting into Effect the Directive 2000/53/EC (3 pp)

Background, Aims and Scope When joining the European Union on 1st May 2004, Estonia had to conform its legislation to the European Union legislation. In relation with that, also the treatment requirements on end-of-life vehicles proceeding from Directive 2000/53/EC of the European Parliament and of the Council of 18 September 2000 were established in Estonia for the first time. Since this area was not regulated with law beforehand, there was not any information available about it. The aim of the current survey was to ascertain the condition of scrap yards in mid 2004. In addition to that, also to identify the number of scrap yards operating in Estonia, to classify these by the number of dismantled vehicles and the potential environmental hazard, and to map the locations of car dismantling companies and evaluate their compliance with the valid requirements. Methods The companies that have been registered in the Commercial Registry under the activity code 503090-end-of-life vehicle dismantling were visited and visually reviewed. During the visits, the compliance of scrap yards with the existing requirements was evaluated and it was also attempted to identify how environmentally sound the dismantling technology of every scrap yard owner is. Results and Discussion Altogether, 63 scrap yards operated in Estonia by mid 2004. Twelve of them dismantled more than 100 vehicles, 13 of them 51-99 vehicles and 38 up to 50 vehicles a year. The total annual market capacity on dismantling of vehicles in Estonia is considered to be approx. 10,000 units. There are very few companies dealing only with car dismantling as the main business. Most scrap-yard owners also offer side services, e.g. haulage, car repair and maintenance. The dismantlers are interested in the selling of second-hand spare parts and scrap metal. Only one company out of 63 complied with all the requirements enacted by the relevant decision of the Estonian Minister of Environment. The rest of the scrap yards did not meet the requirements on the site on storage and treatment nor did they have the hazardous waste handling licence or the waste permit. Of the requirements established for the site for storage of end-of-life vehicles, 97% of the scrap yards were surrounded with a fence, 67% had a 24-hour guard, 45% had covered the areas with waterproof cover, but only 3% had an oil trap. Sites for treatment were in a somewhat better condition, these were mostly situated inside the buildings, where floors were covered with waterproof covers. Most of the dismantlers collected the waste oil and waste fluids into separate vessels, but there were a number of dismantlers who did not know of existence of polychlorinated biphenyls (PCB) in car air conditioning systems and the availability of mercury in sensors belonging in passenger safety systems. Proceeding from the general condition of the scrap yard, the rest of 62 scarp yards were distributed between two empirical parameters - 'rather environmentally hazardous' or 'rather not environmentally hazardous'. As a matter of fact, 17% of scrap yards turned out 'rather environmentally hazardous'. Conclusion Out of the scrap yards operating in Estonia, only one is compliant with the requirements set up by Directive 2000/53/EC. Another 62 appeared during the review to be sites of potential environmental pollution. In order to comply with environmental requirements and get the hazardous waste treatment license, the scrap yard owners have to invest into state-of-the-art dismantling and environment protection equipment. The main obstacle to reach the environmentally sound scrap-yard is the high investment cost and the black market for spare parts. Recommendation and Outlook As the correction of the market in end-of-life vehicle treatment started after the adoption of Directive 2000/53/EC, the environmental authorities have to look after the ongoing correction. It is because there is still a demand for cheap spare parts and it makes it attractive to dismantle the vehicles out of scrap-yards by licensees.     

Adapting a geographical information system-based water resource management to the needs of the Romanian water authorities

Background, aim, and scope  

The need for global and integrated approaches to water resources management, both from the quantitative and the qualitative point of view, has long been recognized. Water quality management is a major issue for sustainable development and a mandatory task with respect to the implementation of the European Water Framework Directive as well as the Swiss legislation. However, data modelling to develop relational databases and subsequent geographic information system (GIS)-based water management instruments are a rather recent and not that widespread trend. The publication of overall guidelines for data modelling along with the EU Water Framework Directive is an important milestone in this area. Improving overall water quality requires better and more easily accessible data, but also the possibility to link data to simulation models. Models are to be used to derive indicators that will in turn support decision-making processes. For this whole chain to become effective at a river basin scale, all its components have to become part of the current daily practice of the local water administration. Any system, tool, or instrument that is not designed to meet, first of all, the fundamental needs of its primary end-users has almost no chance to be successful in the longer term.     

Environmental issues and management strategies for waste electronic and electrical equipment

Issues surrounding the impact and management of discarded or waste electronic and electrical equipment (WEEE) have received increasing attention in recent years. This attention stems from the growing quantity and diversity of electronic and electrical equipment (EEE) used by modern society, the increasingly rapid turnover of EEE with the accompanying burden on the waste stream, and the occurrence of toxic chemicals in many EEE components that can pose a risk to human and environmental health if improperly managed. In addition, public awareness of the WEEE or "e-waste" dilemma has grown in light of popular press features on events such as the transition to digital television and the exportation of WEEE from the United States and other developed countries to Africa, China, and India, where WEEE has often not been managed in a safe manner (e.g., processed with proper safety precautions, disposed of in a sanitary landfill, combusted with proper air quality procedures). This paper critically reviews current published information on the subject of WEEE. The definition, magnitude, and characteristics of this waste stream are summarized, including a detailed review of the chemicals of concern associated with different components and how this has changed and continues to evolve over time. Current and evolving management practices are described (e.g., reuse, recycling, incineration, landfilling). This review discusses the role of regulation and policies developed by governments, institutions, and product manufacturers and how these initiatives are shaping current and future management practices.     

Plant protection products: assessing the risk for terrestrial plants

The fundamental data requirements for the authorization of plant protection products and the inclusion of active ingredients in Annex I of Council Directive 91/414/EEC (Council Directive of 15 July 1991 referring to placing plant protection products on the market (91/414/EEC). Official Journal of European Communities L 230, 19 August 1991) are described in the Annexes II and III of this Directive. Definite instructions with regard to preconditions for implementation and methodology (guidelines) concerning investigations with terrestrial plants are deficient. In addition to that, the uniform principles for the registration of plant protection products in the Member States described in Annex VI of the directive do not include any criteria concerning the risk assessment for non-target plants. However, plant protection products often show effects on non-target plants which need to be assessed as a requirement for the authorisation of the product. Hence, the German Federal Environmental Agency has developed a tiered approach to assess the effects of plant protection products on non-terrestrial plants. The risk is assessed using the effect-concentration evaluated in ecotoxicological tests and the environmental concentration predicted by validated exposure models. To protect non-target plants in terrestrial ecosystems assessment factors need to be considered. In the future, the risk for terrestrial plants needs to be addressed, also with regard to the revision of the Annexes of Directive 91/414/EEC.     

Incineration Techniques for Control of Volatile Organic Compound Emissions

A review of incineration techniques for control of volatile organic compound emissions is presented in two consecutive issues o/JAPCA. Part I presented an overview of the process including fundamentals and design considerations. Both thermal and catalytic incinerators were considered. Part IIpresents capital and annual operating cost estimates for both thermal and catalytic incinerator systems based on information received from a number of equipment manufacturers.     

Hexachlorocyclohexane (HCH) as new Stockholm Convention POPs��a global perspective on the management of Lindane and its waste isomers

Purpose

Hexachlorocyclohexane (HCH) isomers (??-, ??- and ??- (Lindane)) were recently included as new persistent organic pollutants (POPs) in the Stockholm Convention, and therefore, the legacy of HCH and Lindane production became a contemporary topic of global relevance. This article wants to briefly summarise the outcomes of the Stockholm Convention process and make an estimation of the amount of HCH waste generated and dumped in the former Lindane/HCH-producing countries.

Results

In a preliminary assessment, the countries and the respective amount of HCH residues stored and deposited from Lindane production are estimated. Between 4 and 7 million tonnes of wastes of toxic, persistent and bioaccumulative residues (largely consisting of alpha- (approx. 80%) and beta-HCH) are estimated to have been produced and discarded around the globe during 60 years of Lindane production. For approximately 1.9 million tonnes, information is available regarding deposition. Countries are: Austria, Brazil, China, Czech Republic, France, Germany, Hungary, India, Italy, Japan, Macedonia, Nigeria, Poland, Romania, Slovakia, South Africa, Spain, Switzerland, Turkey, The Netherlands, UK, USA, and former USSR. The paper highlights the environmental relevance of deposited HCH wastes and the related POPs?? contaminated sites and provides suggestions for further steps to address the challenge of the legacy of HCH/Lindane production.

Conclusion

It can be expected that most locations where HCH waste was discarded/stockpiled are not secured and that critical environmental impacts are resulting from leaching and volatilisation. As parties to the Stockholm Convention are legally required to take action to stop further POPs pollution, identification and evaluation of such sites are necessary.     

Risk Communication at the Community Level: European Lessons from the Seveso Directive

After the devastating accident at Seveso, Italy on July 10,1976 and the resulting confusion between the local authorities and the company’s representatives, the European Community issued a General Directive in 1982 that requires every chemical company to provide full information on hazardous sites, emergency plans, storage of dangerous substances, accidental release scenarios, and similar issues to the host community. In addition, the public has to be informed about the potential risks of the facilities and the protective actions necessary to undertake in an emergency. The Directive resulted in an increased effort to communicate the risks of hazardous facilities to community officials and to local residents. This article explores the strategies of and the experiences with the risk communication efforts in different European countries and describes the responses to these efforts by stakeholder groups and the general public. The political adoption of risk communication programs are strongly influenced by the regulatory style of each country. Adversarial and consensual systems appear to cope better with public disclosure of information than bureaucratic, corporatist, or authoritarian systems. Because of differences in regulatory style, only few elements of the European experiences with risk communication can be transferred to the U.S.-context.     

Conflict resolution by participatory management: remote sensing and GIS as tools for communicating land-use needs for reindeer herding in northern Sweden

When seeking to resolve complex land-management issues, geographical assessment of resources that are in short supply or in dispute can aid the communication of knowledge and the understanding among and between different stakeholders. In this paper, we illustrate how remote sensing and GIS can be used to gather and compile information regarding land-use activities and patterns among reindeer herders and other land users (forestry, mining, tourism, etc) in northern Sweden. The project represents a novel user-oriented effort largely based on the work carried out by the principal end user, i.e. the reindeer herders themselves. The basis for development of land-use plans for reindeer husbandry, was the following: to collect and digitally systemize traditional ecological and landscape knowledge of reindeer habitat use; to integrate this information with results from field inventories and satellite-based vegetation classifications; to map activities of other land users. The resulting land-use plans provide information that can facilitate consultation between the reindeer herders and other stakeholders and can facilitate operational work in reindeer management. This project can serve as a model for participatory involvement and planning, bringing indigenous knowledge and advanced remote-sensing techniques together in an interactive process.     

The Evolution of the Environmental Quality Concept: From the US EPA Red Book to the European Water Framework Directive

- DOI: http://dx.doi.org/10.1065/espr2006.01.003 Background Water Quality Criteria were firstly defined in the 1970s by the EPA in the USA and the EIFAC in Europe, recognizing the need for protecting water quality in order to allow the use of water resources by man. In the 1990s, the European Commission emphasized the importance of safeguarding structure and function of biologic communities. These approaches were chemically-based. The European Water Framework Directive (WFD) substantially changes the concept of Water Quality, by assuming that a water body needs to be protected as an environmental good and not as a resource to be exploited. In this frame, the biological-ecological quality assumes a prevailing role. Main Features The Water Quality concept introduced by the WFD is a challenge for environmental sciences. Reference conditions should be defined for different typologies of water bodies and for different European ecoregions. Suitable indicators should be developed in order to quantify ecological status and to define what a 'good' ecological status is. Procedures should be developed for correlating the deviation from a good ecological to the effects of multiple stressors on function and structure of the ecosystem. The protection of biodiversity becomes a key objective. In this frame, the traditional procedures for ecotoxicological risk assessment, mainly based on laboratory testing, should be overcome by more site-specific approaches, taking into account the characteristics and the homeostatic capabilities of natural communities. In the paper an overview of the present knowledge and of the new trends in ecotoxicology to get these objectives will be given. A procedure is suggested based on the concept of Species Sensitivity Distribution (SSD). Recommendations and Perspective . The need for more site-specific and ecologically-oriented approaches in ecotoxicology is strongly recommended. The development of new tools for implementing the concept of 'Stress Ecology' has been recently proposed by van Straalen (2003). In the same time, more 'cological realism'is needed in practically applicable procedures for regulatory purposes.     

Incineration Techniques for Control of Volatile Organic Compound Emissions Part I. Fundamentals and Process Design Considerations

A review of incineration techniques for control of volatile organic compound emissions is presented in two consecutive issues of JAPC A. Part I presents an overview of the process including fundamentals and design considerations. Both thermal and catalytic incincerators are considered. Part II will present capital and annual operating cost estimates for both thermal and catalytic incinerator systems based on information received from a number of equipment manufacturers.     

Adapting a geographical information system-based water resource management to the needs of the Romanian water authorities

Background, aim, and scope

The need for global and integrated approaches to water resources management, both from the quantitative and the qualitative point of view, has long been recognized. Water quality management is a major issue for sustainable development and a mandatory task with respect to the implementation of the European Water Framework Directive as well as the Swiss legislation. However, data modelling to develop relational databases and subsequent geographic information system (GIS)-based water management instruments are a rather recent and not that widespread trend. The publication of overall guidelines for data modelling along with the EU Water Framework Directive is an important milestone in this area. Improving overall water quality requires better and more easily accessible data, but also the possibility to link data to simulation models. Models are to be used to derive indicators that will in turn support decision-making processes. For this whole chain to become effective at a river basin scale, all its components have to become part of the current daily practice of the local water administration. Any system, tool, or instrument that is not designed to meet, first of all, the fundamental needs of its primary end-users has almost no chance to be successful in the longer term.

Materials and methods

Although based on a pre-existing water resources management system developed in Switzerland, the methodological approach applied to develop a GIS-based water quality management system adapted to the Romanian context followed a set of well-defined steps: the first and very important step is the assessment of needs (on the basis of a careful analysis of the various activities and missions of the water administration and other relevant stakeholders in water management related issues). On that basis, a conceptual data model (CDM) can be developed, to be later on turned into a physical database. Finally, the specifically requested additional functionalities (i.e. functionalities not provided by classical commercial GIS software), also identified during the assessment of needs, are developed. This methodology was applied, on an experimental basin, in the Ialomita River basin.

Results

The results obtained from this action-research project consist of a set of tangible elements, among which (1) a conceptual data model adapted to the Romanian specificities regarding water resources management (needs, data availability, etc.), (2) a related spatial relational database (objects and attributes in tables, links, etc.), that can be used to store the data collected, among others, by the water administration, and later on exploited with geographical information systems, (3) a toolbar (in the ESRI environment) offering the requested data processing and visualizing functionalities. Lessons learned from this whole process can be considered as additional, although less tangible, results.

Discussion

The applied methodology is fairly classical and did not come up with revolutionary results. Actually, the interesting aspects of this work are, on the one hand, and obviously, the fact that it produced tools matching the needs of the local (if not national) water administration (i.e. with a good chance of being effectively used in the day-to-day practice), and, on the other hand, the adaptations and adjustments that were needed both at the staff level and in technical terms.

Conclusions

This research showed that a GIS-based water management system needs to be backed by some basic data management tools that form the necessary support upon which a GIS can be deployed. The main lesson gained is that technology transfer has to pay much attention to the differences in existing situations and backgrounds in general, and therefore must be able to show much flexibility. The fact that the original objectives could be adapted to meet the real needs of the local end-users is considered as a major aspect in achieving a successful adaptation and development of water resources management tools. Time needed to setup things in real life was probably the most underestimated aspect in this technology transfer process.

Recommendations and perspectives

The whole material produced (conceptual data model, database and GIS tools) was disseminated among all river basin authorities in Romania on the behalf of the national water administration (ANAR). The fact that further developments, for example, to address water quantity issues more precisely, as envisaged by ANAR, can be seen as an indication that this project succeeded in providing an appropriate input to improve water quality in Romania on the long term.

     

Decontamination of polycyclic aromatic hydrocarbons and nonylphenol from sewage sludge using hydroxypropyl-β-cyclodextrin and evaluation of the toxicity of leachates

A decontamination technique based in cyclodextrin extraction has been developed to eliminate nonylphenol (NP) and 16 polycyclic aromatic hydrocarbons (PAHs; the US Environmental Protection Agency priority pollutants list) from sewage sludge. In a first step, PAHs and NP were characterised in six sludges to determine contamination levels according to limit values proposed by the European Union Sludge Directive draft. There were few variations in the total PAHs content with levels of 1.88 to 3.05 mg kg^?1. Three-ring PAHs predominated, but fluoranthene and pyrene were also present. None of the sludge exceeded the PAHs limit proposed by the European Union’s draft Directive. On the contrary, NP content in four of the six sludges was over the recommended limits of 50 mg kg^-1 for NP ethoxylates. With the aim of obtaining NP values below the concentration limits proposed to use the sewage sludge as agricultural amendments, a preliminary study using hydroxypropyl-β-cyclodextrin (HPBCD) extractions as a decontamination technique was carried out. About 90 % of NP content was removed with only one extraction with HPBCD, whereas after three sequential extractions using an aqueous solution without HPBCD, the NP extraction percentage was less than 1 %. Simultaneously, PAHs extraction percentages obtained with HPBCD were also much higher than when aqueous solution was used, especially in the case of two- and three-ring PAHs. Finally, the potential environmental hazard of HPBCD leachates to aquatic organisms (Daphnia magna) was tested. These results indicate that the treatment of sewage sludge with cyclodextrin could allow their safe use as fertiliser in agriculture.     

Towards integrated environmental assessment support for the European Community's environmental action programme process

This paper firstly discusses the strategy for integrated environmental assessment (IEA) at the European Environment Agency (EEA), addressing the principles, definition and scope, and summarising the state of the art. The IEA process is described within the framework of the DPSIR concept a chain of causal links going from Driving Forces, Pressures, States to Impacts, which finally leads to political Responses. A key objective of IEA is to facilitate the framing and implementation of policies and strategies. Secondly, the paper summarises the results of the first broader exercise of IEA at the EEA an environmental assessment of the European Community's Fifth Action Programme. Although limited in scope, the exercise provides lessons to be learned. Therefore, the paper concludes, assessments should be validated and be based on the most up-to-date findings, and links need to be created and maintained with the appropriate scientific/research communities. The IEA concept and its approaches should be further elaborated on a European scale according to prominent environmental problems that have a transboundary or a multi-national character. Cost-benefit studies should be enhanced. Finally, improved information is required on the DPSIR framework, including the interrelationship between the economic and environmental systems.     

Evaluations of combined zebrafish (Danio rerio) embryo and marine phytoplankton (Diacronema lutheri) toxicity of dissolved organic contaminants in the Ythan catchment,Scotland, UK

A wide variety of organic contaminants including pesticides, polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs) have previously been detected in surface waters in the river Ythan catchment, North East Scotland UK. While the concentrations detected were below Water Framework Directive Environmental Quality Standards (WFD-EQSs) environmental exposures to the diverse mixtures of contaminants, known and unknown, may pose chronic and/or sublethal effects to non target organisms. The present study assessed the embryo and algal toxicity potential of freely dissolved organic contaminants from the Ythan catchment using silicone rubber passive sampling devices (SR-PSDs) and miniaturised bioassay techniques. Zebrafish (Danio rerio) embryos and marine phytoplankton species (Diacronema lutheri) were exposed to extracts from SR-PSDs deployed at different locations along the river Ythan and an undeployed procedural blank. Statistically significant developmental and algal toxicities were measured in all tests of extracts from deployed samples compared with the procedural blanks. This indicates environmental exposure to, and the combined toxicity potential of, freely dissolved organic contaminants in the catchment. The present and previous studies in the Ythan catchment, coupling SR-PSDs and bioassay techniques, have both helped to understand the interactions and combined effects of dissolved organic contaminants in the catchment. They have further revealed the need for improvement in the techniques currently used to assess environmental impact.     

Reducing fluxes of faecal indicator compliance parameters to bathing waters from diffuse agricultural sources: the Brighouse Bay study, Scotland

The European Water Framework Directive requires the integrated management of point and diffuse pollution to achieve 'good' water quality in 'protected areas'. These include bathing waters, which are regulated using faecal indicator organisms as compliance parameters. Thus, for the first time, European regulators are faced with the control of faecal indicator fluxes from agricultural sources where these impact on bathing water compliance locations. Concurrently, reforms to the European Union (EU) Common Agricultural Policy offer scope for supporting on-farm measures producing environmental benefits through the new 'single farm payments' and the concept of 'cross-compliance'. This paper reports the first UK study involving remedial measures, principally stream bank fencing, designed to reduce faecal indicator fluxes at the catchment scale. Considerable reduction in faecal indicator flux was observed, but this was insufficient to ensure bathing water compliance with either Directive 76/160/EEC standards or new health-evidence-based criteria proposed by WHO and the European Commission.     

Assessment of hydrochemical trends in the highly anthropised Guadalhorce River basin (southern Spain) in terms of compliance with the European groundwater directive for 2015

One of the key aspects introduced by the European Water Framework Directive 2000/60/EC (WFD) and developed by Groundwater Directive 2006/118/EC was the need to analyse pollution trends in groundwater bodies in order to meet the environmental objectives set in Article 4 WFD. According to this Directive, the main goal of “good status” should be achieved by the year 2015, and having reached this horizon, now is a suitable time to assess the changes that have taken place with the progressive implementation of the WFD. An extensive database is available for the Guadalhorce River basin, and this was used not only to identify in groundwater but also to draw real conclusions with respect to the degree of success in meeting the targets established for this main deadline (2015) The geographic and climate context of the Guadalhorce basin has facilitated the development of a variety of economic activities, but the one affecting the largest surface area is agriculture (which is practised on over 50 % of the river basin). The main environmental impacts identified in the basin aquifers arise from the widespread use of fertilisers and manures, together with the input of sewage from population centres. In consequence, some of the groundwater bodies located in the basin have historically had very high nitrate concentrations, often exceeding 200 mg/L. In addition, return flows, the use of fertilisers and other pressures promote the entry of other pollutants into the groundwater, as well as the salinisation of the main aquifers in the basin. In order to assess the hydrochemical changes that have taken place since the entry into force of the WFD, we performed a detailed trends analysis, based on data from the official sampling networks. In some cases, over 35 years of water quality data are available, but these statistics also present significant limitations, due to some deficiencies in the design or management; thus, data are missing for many years, the results are subject to seasonality effects, there are gaps in the historical records obtained by the monitoring networks and other shortcomings. The results obtained were analysed with the non-parametric Mann-Kendall test and revealed a general upward trend of pollutants in the areas affected by major pressures. In this analysis, we evaluated not only the increase or decrease in pollutants but also the different processes detected and the sources of pollution within the basin area. Our evaluation shows that robust measures should be taken in order to prevent further major degradation of groundwater quality and to enable “good quality” status to be achieved in future extensions of the WFD.     

Assessing the efficacy of dredged materials from lake panasoffkee,florida: Implication to environment and agriculture part 1: Soil and environmental quality aspect

BACKGROUND, AIMS AND SCOPE: Dredged materials because of its variable but unique physical and chemical properties are often viewed by society and regulators as pollutants, but many have used these materials in coastal nourishment, land or wetland creation, construction materials, and for soil improvement as a soil amendment. Environmental impact assessment is an important pre-requisite to many dredging initiatives. The ability to reuse lake-dredge materials (LDM) for agricultural purposes is important because it reduces the need for off-shore disposal and provides an alternative to disposal of the materials in landfills. Additional research on disposal options of dredged materials are much needed to supply information on criteria testing and evaluation of the physical and chemical impacts of dredged materials at a disposal site, as well as information on many other aspects of dredging and dredged material disposal. While preliminary efforts are underway to provide information to establish criteria for land disposal, testing procedures for possible land disposal of contaminated sediments are still in their developing stage. The objective of this study (Part 1) was to quantify the effect of applied LDM from Lake Panasoffkee (LP), Florida on soil physico-chemical properties (soil quality) at the disposal site. This series of two papers aims at providing assessment of the efficacy of lake-dredged materials from LP especially its implication to environment (soil quality, Part 1) and agriculture (forage quality and pasture establishment, Part 2). METHODS: The experimental treatments that were evaluated consisted of different ratios of natural soil (NS) to LDM: LDM0 (100% NS:0% LDM); LDM25 (75% NS:25% LDM); LDM50 (50% NS:50% LDM); LDM75 (25% NS:75% LDM); and LDM100 (0% NS:100% LDM). Field layout was based on the principle of a completely randomized block design with four replications. The Mehlich 1 method (0.05 N HCl in 0.025 N H2SO4) was used for chemical extraction of soil. Soil P and other exchangeable cations (Ca, Mg, K, Al, and Fe) were analyzed using an Inductively Coupled Plasma (ICP) Spectroscopy. The effects of dredged materials addition on soil quality and compaction were analyzed statistically following the PROC ANOVA procedures. RESULTS AND DISCUSSION: Sediments that were dredged from LP have high CaCO3 content (82%) and when these materials were incorporated into existing topsoil they would have the same favorable effects as liming the field. Thus, sediments with high CaCO3 may improve the physical and chemical conditions of subtropical sandy pastures. The heavy and trace metal contents of LDM were below the probable effect levels (PEL) and threshold effect levels (TEL). Average values for Pb, Zn, As, Cu, Hg, Se, Cd, and Ni of 5.2 +/- 1.3, 7.0 +/- 0.6, 4.4 +/- 0.1, 8.7 +/- 1.2, 0.01 +/- 0.02, 0.02 +/- 0.02, 2.5 +/- 0.1, and 14.6 +/- 6.4 mg kg(-1), respectively, were below the TEL and the PEL. TEL represents the concentrations of sediment-associated contaminants that are considered to cause significant hazards to aquatic organisms, while, PEL represents the lower limit of the range of the contaminant concentrations that are usually or always associated with adverse biological effects. As such, the agricultural or livestock industry could utilize these LDM to produce forages. LDM should be regarded as a beneficial resource, as a part of the ecological system. Addition of LDM had significant (p < or = 0.001) effects on soil physico-chemical properties and soil quality. Compared with the control plots, the soils in plots amended with LDM exhibited: (1) lower degree of soil compaction; (2) an increase in soil pH, Ca, and Mg; (3) decrease in the levels of soil Mn, Cu, Fe, Zn, and Si; and (4) no significant change in the level of Na in the soil. Results have shown the favorable influence that LDM had on soil compaction. The treatment x year interaction effect was not significant, but the average soil compaction varied widely (p < or = 0.001) with LDM application. In 2002 and 2003, soil compaction of plots was lowered significantly as a result of LDM additions. The least compacted soils in 2002 and 2003 were observed from plots with LDM75 with mean soil compaction of 300 x 10(3) and 350 x 10(3) Pa, respectively. CONCLUSION: Beneficial uses of dredged materials from LP, Florida are both economical and environmental. Often these materials can be obtained at little or no cost to the farmers or landowners in south Florida. Environmentally, dredging of sediments that are rich in CaCO3 should restore the 19.4-sq km LP by removing natural sediments from the lake bottom to improve the fishery, water quality, and navigation of the lake. The bottom sediment materials from lakes, river, and navigational channels usually are composed of upland soil enriched with nutrients and organic matter. These materials should be regarded as a beneficial resource to be used productively and not to be discarded as spoil materials. RECOMMENDATION AND OUTLOOK: Land application of LDM from LP may not only provide substantial benefits that will enhance the environment, community, and society in south Florida, but also in other parts of the world especially those areas having tropical and subtropical climate with forage-based beef cattle pastures. The heavy and trace metal contents of LDM from LP were below the PEL and TEL. As such, the agricultural or livestock industry could utilize these LDM to produce forages (Part 2 of this study). LDM should be regarded as a beneficial resource, as a part of the ecological system. Further studies are still needed to determine whether the environmental and ecological implications of LDM application are satisfied over the longer term.     

Adaptive coastal planning and the European Union's water framework directive: a Swedish perspective

The implementation of the EU Water Framework Directive and the achievement of its water quality objectives will to a large degree depend on scientific knowledge about the sources and status of water resources and the effects of mitigative measures. Coastal waters will be of central interest, since the management of whole river basins may be affected if coastal water status is not satisfactory. The Water Directive's general directions on what information the water authorities need and on suitable methods for obtaining such information leave it to the Member states to decide on more precise instructions. Improved legal mechanisms are needed to assist and guide the managers and scientists charged with implementing the directive and achieving its water quality objectives, particularly when faced with insufficient information, flawed knowledge, or changed circumstances. We assess progress in the current process of implementing the Water Directive in Sweden, focussing on coastal waters, and on general problems arising using this type of legal technique.