Determination of lead, cadmium and copper in roadside soil and plants in Elazig, Turkey

The concentrations of lead, cadmium and copper in roadside soil and plants in Elazig, Turkey were investigated. Soil samples were collected at distances of 0, 25 and 50 m from the roadside. The concentrations of lead, cadmium and copper were measured by Flame Atomic Absorption Spectrophotometry (FAAS). A slotted tube atom trap (STAT) was used to increase the sensitivity of lead and cadmium in FAAS. Lead concentrations in soil samples varied from 1.3 to 45 mg kg⁻¹ while mean lead levels in plants ranged from120 ng g⁻¹ for grape in point-4 to 866 ng g⁻¹ for apple leaves in point-2. Lead analyses showed that there was a considerable contamination in both soil and plants affected from traffic intensity. Overall level of Cd in soil samples lies between 78 and 527 ng/g while cadmium concentration in different vegetations varied in the range of 0.8–98.0 ng g⁻¹. Concentrations of copper in soil and plant samples were found in the range of 11.1–27.9 mg kg⁻¹ for soil and 0.8–5.6 mg kg⁻¹ for plants. Standard reference material (SRM) was used to find the accuracy of the results of soil analyses.     

Evaluation of metal contents of household detergent samples from Turkey by flame atomic absorption spectrometry

The concentrations of cadmium, copper, chromium, cobalt, iron, lead, manganese, nickel, and zinc in detergent samples from Kayseri, Turkey were determined by flame atomic absorption spectrometry. HClO₄ (10 mL)/HNO₃ (10 mL) mixture was used for the digestion of household detergent samples. The correctness of the analytical procedures was checked with standard addition–recovery tests in different detergent samples for the investigated metal ions. The concentration ranges of the elements in the detergent samples were found as 17.2–60.1, 11.1–40.1, 2.5–32.3, 8.1–10.5, 7.2–21.6, 9.8–17.9, 1.7–3.8, 12.5–22.5, and 2.0–5.8 μg/g for iron, manganese, zinc, copper, lead, cobalt, cadmium, nickel, and chromium, respectively. The values found in this work were compared with some other studies around the world conducted on detergent samples.     

Assessment of trace metal concentrations in muscle tissue of certain commercially available fish species from Kayseri,Turkey

Regular consumption of fish has been widely recommended by health authorities. However, it is known that some species accumulate high levels of contaminants including heavy metals (e.g., Hg, Cd, Pb, and As). In this study, Cu, Pb, Co, Ni, Cr, Mn, Cd, and Fe were determined in the muscle tissue of 11 commercially available fish species (Sparus auratus, Dicentrarchus labrax, Mullus barbatus, Belone belone, Psetta maxima, Epinephelus aeneus, Salmothymus, Soleidae, Pomatomus saltatrix, Engraulis encrasicolus, and Sarda sarda) supplied from retailers in Kayseri, Turkey. Determinations were carried out by flame atomic absorption spectrometry after the wet digestion method. The average metal concentrations of the 11 species were determined in the range of 0.54–1.79, 0.82–1.40, 2.38–4.54, 1.23–3.67, 5.01–5.97, 0.77–3.59, 0.48–1.06, and 5.05–122.8 μg/g wet weight for Cu, Pb, Co, Ni, Cr, Mn, Cd, and Fe, respectively. The permissible tolerable daily intake (PTDI) and calculated daily intake (CDI) values were compared, and the calculated daily intake values of the samples were found to be below the established values. Correlations between the metal contents in samples were investigated by performing correlation tests with SPSS 13.0 for windows.     

Trace metal contents in chewing gums and candies marketed in Turkey

Cu, Ni, Pb, Fe, Mn, Cr and Cd contents were determined in 17 different brands of chewing gum and candy samples available in local markets of Kayseri, Turkey. Concentration of selected trace metals were estimated using flame atomic absorption spectrometer after dry and wet digestion methods. Out of 17 brands of chewing gums and candies analysed, four were cocoa based, two were sugar based and other were of fruit based. Copper level ranged from 0.219 to 2.455 microg/g with an average of 1.390 microg/g. Nickel ranged from 0.120 to 2.588 microg/g with an average of 0.846 microg/g. Lead level ranged from 0.031 to 2.46 microg/g with an average of 0.746 microg/g. Iron level ranged from 3.963 to 9.863 microg/g with an average of 6.618 microg/g. Manganese level ranged from 1.872 to 5.067 microg/g with an average of 3.196 microg/g. Chromium ranged from 0.740 to 6.265 microg/g with an average of 2.473 microg/g and cadmium level ranged from 0.027 to 0.825 microg/g with an average of 0.296 microg/g. Cocoa based samples were found to have higher contents of the analysed metals than sugar and fruit based samples.     

Evaluation of trace heavy metal levels of some fish species sold at retail in Kayseri, Turkey

Cd, Ni, Cr, Zn, Cu and Pb concentrations of muscle tissue of 61 fish samples belonging to six fish species (Sparus auratus, Pomatomus saltatrix, Sarda sarda, Engraulis encrasicholus, Sander lucioperca, Scomber scombrus) retailed in Kayseri, Turkey were determined by flame atomic absorption spectrometry after wet digestion. Cd concentrations of at least 31 fish samples (50.8%) and Pb concentrations of at least six fish samples (9.8%) exceeded the corresponding Turkish permissible limit of 0.05 and 0.2 mg kg(-1) respectively whereas Zn concentrations of 11 fish samples (18%) exceeded the Turkish Food Codex limits of 50 mg kg(-1) for Zn. Cu concentrations of all fish species analyzed (100%) were below the corresponding Turkish legislations of 20 mg kg(-1). No limits were established concerning Ni and Cr concentrations in fish by the Turkish governmental authorities.     

Quantitative analyses of selected polychlorinated biphenyl (PCB) congeners in water,soil, and sediment during winter and spring seasons from Msunduzi River,South Africa

The lack of information and the need for knowledge on the organic pollutants within the area of KwaZulu-Natal together with the global problem of water supply have prompted our investigation into the analyses of eight polychlorinated biphenyl (PCB) congeners in the Msunduzi River of KwaZulu-Natal, South Africa. Soil, sediment, and water samples were collected at ten different sites along the river during winter and spring seasons. Soil and sediment samples were extracted using ultra sonication with dichloromethane while water samples were liquid-liquid extracted using dichloromethane. All sample extracts were cleaned-up using a multi-layer silica gel column and analyzed with gas chromatography-mass spectrometry. Quality assurance measures were also determined. The percentage recoveries for water were 53–128 for all the PCBs analyzed, while sediment recoveries ranged between 69 and 105%. The highest total concentrations of the PCBs in sediment were 214.21–610.45 ng/g dw at the Du Toit sampling site and 30.86–444.43 ng/g dw basis at the wastewater treatment inlet for winter and spring, respectively. Soil PCB concentrations were 76.53–397.75 ng/g dw at the Msunduzi Town sampling site and 20.84–443.49 ng/g (dry weight) at the Du Toit sampling site for winter and spring, respectively. In addition, high PCB concentrations were found in effluent of the wastewater treatment inlet compared to other sampling sites, which ranged between 0.68–22.37 and 2.53–35.69 ng/mL for winter and spring seasons, respectively. In all the sampling sites selected for this study, Du Toit afforded the highest PCB concentration levels and the lowest was after chlorination at the Darvill wastewater treatment plant. The results presented are new and it is the first study of organic pollutants such as PCBs that has been carried out on this river.     

Characterization and assessment of a large-scale domestic advanced wastewater treatment plant in Turkey

The paper presents new studies about the removal efficiencies and characterization of the Municipal Wastewater Treatment Plant (MWWTP) in Kayseri, Turkey, which is serving for 800,000 population equivalents with the capacity of 110,000 m(3)/day, between 2006 and 2009. Kayseri discharges its effluents to Karasu Creek that downstream joins the Kizilirmak river, the longest river in Turkey discharging into the Black Sea. Four years of operation data between 2006 and 2009 calendar years were obtained from KASKI General Directorate. Influent and effluent samples were collected daily and suspended solids (SS), chemical oxygen demand (COD), biochemical oxygen demand in 5 days (BOD(5)), total nitrogen (TN), and total phosphorus (TP) were measured, aiming to study the evolution of the removal efficiencies for each year. The following yearly mean removal efficiencies were performed in the treatment plant: 94%, 97%, 97%, 95% for SS; 94%, 96%, 95%, 95% for COD; 98%, 98%, 98%, 98% for BOD(5); 84%, 87%, 89%, 82% for TN; and 71%, 86%, 80%, 86% for TP, in 2006, 2007, 2008, and 2009, respectively. The performance of Kayseri MWWTP was given both in terms of influent and effluent quality and in comparison with the current legislation on discharge limits to the receiving body. During the studied period, mean concentrations in the effluent did not exceed the imposed limits, but sometimes, higher values were noticed for SS, TN, and TP. In conclusion, the plant performances concerning these parameters were excellent and Kayseri MWWTP was operating efficiently according to the conventional control parameters.     

Comparison of three sequential extraction procedures for partitioning of heavy metals in car park dusts

The aim of this study was to elucidate the amount of metal released at each step by using different extractants in three sequential extraction schemes for the partitioning of metal contents of car park deposited dust samples. For this purpose, three different sequential extraction procedures (SEP) were employed for the metal fractionation in car park dust samples collected from the campus of Erciyes University, Kayseri, Turkey. While two of the sequential extraction procedures contain five steps the other, namely the BCR sequential extraction scheme, has three steps. The first two methods fractionate metals to be exchangeable, bound to carbonates, bound to Mn oxides, bound to Fe oxides and bound to organic matter, and the BCR protocol fractionates the metals as acid soluble and exchangeable, reducible, and oxidisable. Determination of the metals Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb and Zn was performed by flame atomic absorption spectrometry (FAAS). The results obtained by the three methods were compared and showed that the amount of metal released at each step of the leaching procedure depended both on the type of reagents used and the sequence in which they were applied. The most mobile elements were Cd, Pb and Zn which are metals potentially toxic to the environment and are also known to originate from traffic. The calculated enrichment factors for Cd and Pb were substantially high (73.5-187 and 18.4-27.5, respectively) and somewhat lower for Zn (5.1-6.8). These results confirm that they are important metal pollutants for car parks. Detection limits and recoveries were found in the range of 0.01-1.39 microg ml(-1) and 68-126%, respectively, for the metals studied and the three sequential extraction procedures.     

Distribution of polycyclic aromatic hydrocarbons (PAHs) and sterols in termite nest, soil, and sediment from Great Kwa River, SE Nigeria

Costal sediment samples from Great Kwa River as well as adjoining termite nest and soil samples were analyzed for quantitative determination of polycyclic aromatic hydrocarbons (PAHs) and sterols using gas chromatography–mass spectrometry (GC–MS) in order to access the possibility of transport of biologically produced PAHs/sterols from termite nest to the sediments. The total PAH concentrations (sum of parent and alkyl) for the sediments ranged between 131.96 and 139.35 ng/g dry weight (dw) while those for the nest and soil samples were in the range 9.51–9.71 and 71.85–77.26 ng/g dw, respectively. These levels of PAHs in sediments were relatively low compared to other urban/industrial Asian and American countries. No evidence of the usual biologically produced PAHs was found, thus reducing the likelihood of transport of these compounds from the nest to the sediments. The absence of parent and alkyl PAHs in central compartment of the nest may reflect the selective fern leaves feeding pattern of the dominant termite species prevalent in the vicinity of the study site. Utilization of six selected PAH ratios such as Fla/(Fla + Pyr) (0.4–0.5), Ant/(Ant + Phe) (0.25–0.90), BaA/(BaA + Chrys) (0.45–0.61), MP/P (0.05–6.81), 1,7/(1,7?+?2,6)-DMP (0.61–0.95), and LPAH/HPAH ( 2.80–3.80) allows discrimination of PAH sources for the samples to be made with a mixed source dominance observed. Examination of sterol distributions in the samples shows relatively high abundance of cholest-5-en-3β-ol in central compartment of the nest, considered here as a consequence of metabolic conversion of phyto-/fungi sterols in the tissues of the termite species. The relatively reduced levels of stanol compounds in central compartment of the nest may be associated with their utilization by the termites for growth and development.     

Solid-phase extraction of heavy metal ions on bucky tubes disc in natural water and herbal plant samples

A preconcentration-separation procedure has been established based on solid-phase extraction of Fe(III) and Pb(II) on bucky tubes (BTs) disc. Fe(III) and Pb(II) ions were quantitatively recovered at pH 6. The influences of the analytical parameters like sample volume, flow rates on the recoveries of analytes on BT disc were investigated. The effects of co-existing ions on the recoveries were also studied. The detection limits for iron and lead were found 1.6 and 4.9 μg L?1, respectively. The validation of the presented method was checked by the analysis of TMDA-51.3 fortified water certified reference material. The presented procedure was successfully applied to the separation-preconcentration and determination of iron and lead content of some natural water and herbal plant samples from Kayseri, Turkey.     

Evaluation of Pb, Cu, Zn, Cd, Ni and Fe levels in Rosmarinus officinalis labaiatae (Rosemary) medicinal plant and soils in selected zones in Jordan

The concentration of heavy metals including Pb, Cu, Zn, Cd, Ni and Fe in different parts of Rosmarinus officinalis medicinal plant grown in Jordan were evaluated. Medicinal plant samples and soil samples were collected from three different zones in Jordan (Irbid, Al-Mafraq and Ma’an). Samples were analyzed by atomic absorption spectrometry (AAS) after chemical treatments using acid digestion procedures. Heavy metal levels in washed and unwashed in each part of R. officinalis were analyzed and compared statistically. Results show that concentrations of investigated heavy metals were varied from plant part to another part of R. officinalis. For example, Pb, Zn, Cu and Cd in most parts of R. officinalis in the three zones were concentrated in the following order: flowers, leaves, stems, whereas Pb, Ni and Fe were concentrated in order as follows: leaves, flowers and stems. Heavy metal concentrations in soil samples was evaluated and correlated with their levels in R. officinalis. Two standard reference materials of plant (SRM 1790a; spinach leaves and CRM 281; rye grass) and one standard reference materials of soil (GBW 07406) were examined to validate the method used. Results show that high recoveries were obtained.     

Determination of trace heavy metals in harvested rainwater used for drinking in Hebron (south West Bank,Palestine) by ICP-MS

Rainwater samples harvested for drinking from the west part of Hebron (south of West Bank in Palestine), the largest city in the West Bank, were analyzed for the content of different trace heavy metals (Cr, Mn, Co, Ni, Cu, Zn, Mo, Ag, Cd, Bi, and Pb) by inductively coupled plasma mass spectrometry (ICP-MS). This study was conducted to determine the water quality of harvested rainwater used for drinking of south West Bank (case study, Hebron area). A total of 44 water samples were collected in November 2012 from 44 house cisterns used to collect rainwater from the roofs of houses. The samples were analyzed for their pH, temperature, electrical conductivity, total dissolved solids, and different heavy metal contents. The pH of all water samples was within the US Environmental Protection Agency limits (6.5–8.5), while some water samples were found to exceed the allowed WHO limit for total dissolved solids (TDSs) in drinking water. Results showed that concentrations of the heavy metals vary significantly between the 44 samples. Results also showed that the concentration of five heavy metals (Cr, Mn, Ni, Ag, and Pb) is higher than the WHO limits for these heavy metals in drinking water. Overall, our findings revealed that harvested rainwater used for drinking of this part of south West Bank is contaminated with heavy metals that might affect human health.     

Gross alpha and beta radioactivity concentration in water, soil and sediment of the Bendimahi River and Van Lake (Turkey)

The concentrations of the natural radioactivity in water, soil and sediment samples collected from Bendimahi River which originates near the Tendürek Mountain (Van, Turkey), its tributaries and Van Lake (Turkey) were measured. The gross-alpha and gross-beta radioactivity concentrations were investigated in May and August in 2005. Determination of the gross-alpha and gross-beta radioactivity of river water, soil and sediment samples was obtained by using gas-flow proportional counter, PIC-MPC 9604-alpha/beta counter. In water samples, the obtained results show that in May; gross-alpha and gross-beta activity concentrations varied between 0.063-0.782 and 0.021-0.816 Bq l(-1) and in August the values were 0.009-0.037 and 0.081-3.116 Bq l(-1), respectively. The gross-alpha and gross-beta activity concentrations in soil samples ranged from 0.800 to 4.277 Bq g(-1) and 0.951 to 11.773 Bq g(-1) in May and 0.686 to 4.713 Bq g(-1) and 0.073 to 9.524 Bq g(-1) in August, respectively. Concentrations ranging from 0.782 to 4.596 Bq g(-1) and from 0.482 to 10.372 Bq g(-1) in May and from 0.580 to 5.824 Bq g(-1) and from 0.303 to 9.702 Bq g(-1) in August for gross-alpha and gross-beta radioactivity were observed in sediments, respectively.     

Pesticide residue analysis of soil,water, and grain of IPM basmati rice

The main aim of the present investigations was to compare the pesticide load in integrated pest management (IPM) with non-IPM crops of rice fields. The harvest samples of Basmati rice grain, soil, and irrigation water, from IPM and non-IPM field trials, at villages in northern India, were analyzed using multi-pesticide residue method. The field experiments were conducted for three consecutive years (2008–2011) for the successful validation of the modules, synthesized for Basmati rice, at these locations. Residues of tricyclazole, propiconazole, hexconazole, lambda cyhalothrin, pretilachlor chlorpyrifos, DDVP, carbendazim, and imidacloprid were analyzed from two locations, Dudhli village of Dehradun, Uttrakhand and Saboli and Aterna village of Sonepat, Haryana. The pesticide residues were observed below detectable limit (BDL) (<0.001–0.05 μg/g) in all 24 samples of rice grains and soil under IPM and non-IPM trials. Residues were below detection level (<0.001–0.05 μg/L) in irrigation water samples (2008–09). Residues of tricyclazole and carbendazim, analyzed from same locations, revealed pesticide residues as BDL (<0.001–0.05 μg/g) in all 40 samples of Basmati rice grains and soil. It was also observed as BDL (<0.001–0.05 μg/L) for 12 water samples (2009–2010). The residues of tricyclazole, propioconazole, chlorpyrifos, hexaconazole, pretilachlor, and λ-cyhalothrin were also found as BDL (<0.001–0.05 μg/g) in 40 samples of Basmati rice grains and soil and 12 water samples (<0.001–0.05 μg/L) (2010–2011).     

Sediment and Suspended Matter Lead Contamination in the Gulf of Kavala, Greece

Sediment and suspended particulate matter samples from 24 stations in the Gulf of Kavala have been examined for lead contamination. Grain size analysis and organic matter content were also performed. Total – anthropogenic sediment lead concentrations and enrichment factors at stations close to harbors and chemical industries were found higher (up to 209–135μg/g and 4.12 respectively), in relation to concentrations from the rest of the coastal zone. In the above areas, increased suspended particulate lead in the bottom of the water column was also recorded (up to 109μg/g). Total sediment lead concentrations composed of high natural Pb background increased with decreasing grain size, suggesting their association with the fine fractions of the sediments (31.1–66.0% mud presence) and the organic matter content (6–9% higher values). Overall, higher total lead concentrations in the sediments, determined by this work, appear to be significantly different from those reported for the Gulf of Kavala in previous studies and similar to those detected in other highly contaminated eastern Mediterranean coastal areas.     

Assessment of trace elements in animal tissues from Turkey

In this study, trace element contents of animal tissues were determined by atomic absorption spectrometry after microwave digestion method. The accuracy of the method was confirmed by analysis of standard reference material (NIST SRM 1577b Bovine Liver). Trace element contents in animal tissue samples were found in the range of 98.3-18.2 μg/g (Fe), 2.89-0.26 μg/g (Mn), 23.9-4.54 μg/g (Zn), 0.08-0.01 μg/g (Pb), 32.9-1.66 μg/g (Cu), and 0.32-0.01 μg/g (Cd). The results were compared with literature values. The results obtained for toxic and trace elements in analyzed animal tissue samples were acceptable to human consumption at nutritional and toxic levels.     

Occurrence of mycotoxins in feed samples in Burdur Province, Turkey

The aim of this study was to evaluate the incidence of total aflatoxin (AF), ochratoxin A, T-2 toxin, deoxynivalenol (DON), zearalenone (ZEA), and fumonisin (FB) in dairy cattle, beef cattle, and lamb–calf feeds. A total of 180 dairy cattle, beef cattle, and lamb–calf feeds (60 samples each) were randomly collected from farms, feed mills, and villages in Burdur province, between September 2006 and August 2007. All samples were analyzed by the competitive Enzyme Linked Immuno Sorbent Assay (ELISA). The most frequent mycotoxin detected was total AF, which was found in 108 samples (60 %) in concentrations ranging from 3.82 to 116.83 μg?kg^?1, followed by DON that was detected in 87 samples (48.3 %), in concentrations ranging from 18.50 to 500 μg?kg^?1. Ochratoxin A (OTA), T-2 toxin, ZEA, and FB were found in 84 (46.7 %), 85 (47.2 %), 57 (31.7 %), and 19 (10.6 %) samples, respectively, in concentrations of 1.01 to 15.85 μg?kg^?1 for OTA, 3.85 to 52.36 μg?kg^?1 for T-2 toxin, 2.10 to 29.30 μg?kg^?1 for ZEA, and 2.69 to 4.96 mg?kg^?1 for FB. It was concluded that feed samples in Burdur province were contaminated by mycotoxins, and the levels of total aflatoxin in the samples were considered a risk to animal health.     

Heavy metal contents of refined and unrefined table salts from Turkey, Egypt and Greece

Trace metal contents of 28 of refined and unrefined table salt samples from Turkey, Egypt and Greece have been determined by flame atomic absorption spectrometry after coprecipitation by dysprosium(III) hydroxide. Copper, nickel, cobalt, manganese, lead and cadmium levels were found in the range of 0.17-0.47, 0.16-1.57, 0.22-0.48, 0.26-4.68, 0.50-1.64 and 0.14-0.30 microg g(-1), respectively. The results found in the presented work were compared with literature values.     

Solid-phase extraction and separation procedure for trace aluminum in water samples and its determination by high-resolution continuum source flame atomic absorption spectrometry (HR-CS FAAS)

In the present study, a separation/preconcentration procedure for determination of aluminum in water samples has been developed by using a new atomic absorption spectrometer concept with a high-intensity xenon short-arc lamp as continuum radiation source, a high-resolution double-echelle monochromator, and a charge-coupled device array detector. Sample solution pH, sample volume, flow rate of sample solution, volume, and concentration of eluent for solid-phase extraction of Al chelates with 4-[(dicyanomethyl)diazenyl] benzoic acid on polymeric resin (Duolite XAD-761) have been investigated. The adsorbed aluminum on resin was eluted with 5 mL of 2 mol L^-1 HNO₃ and its concentration was determined by high-resolution continuum source flame atomic absorption spectrometry (HR-CS FAAS). Under the optimal conditions, limit of detection obtained with HR-CS FAAS and Line Source FAAS (LS-FAAS) were 0.49 μg L^?1 and 3.91 μg L^?1, respectively. The accuracy of the procedure was confirmed by analyzing certified materials (NIST SRM 1643e, Trace elements in water) and spiked real samples. The developed procedure was successfully applied to water samples.     

Variation of Metals in Bed Sediments of Qaraaoun Reservoir, Lebanon

The Qaraaoun Reservoir (impoundment of the River Litani) is the only artificial surface water body in the country, Lebanon. Earlier study on the water quality of the Qaraaoun Reservoir identified three water quality zoning with a central distinct zone suitable for multipurpose water usage. The objective of this study was to extend the earlier work by considering the total metal content of reservoir bed sediments and hence to evaluate factors that control metal deposition or capture. Water samples were collected from 15 sampling sites and sediment samples were simultaneously collected from 9 sites. Water parameters analyzed were pH, Eh, DO and temperature. Sediment samples were dried and sieved and sediment < 75 μ m was retained for analysis. Sediments were subjected to a stepwise heating process with aqua regia to extract the metals, and their content in sediments determined by ICP-MS. The sediment data revealed higher metal contents where the river entered the reservoir which matched higher concentrations of water parameters at the influx site. Regression analysis of total metals in sediments with distance from the river Litani influx point to the dam revealed a log trend for Fe, Cr and Ni, whereas, the concentrations of Cu, Zn, Cd, Pb were better described by a polynomial regression. Three sediment zones were identified: entrance, oxidation (central) and reducing (near dam) zones. Sediment contents of Zn, Cu and Pb correlated with organic content, whereas sediment Cr and Ni were associated with iron. It was concluded that sediments act as a sink for metals and the deposition of metals is primarily related to sediment organic content and the level of dissolved oxygen in water.