冀东油田防治环境污染系统工程研究取得重要成果

查清了冀东油田废水池分布和分析了废水水质，提出了废井回灌、集中处理后回灌或回注、用废水处理机现场处理后回注或回灌等三种处理方案。通过室内、外试验论证了废水和废水池废泥治理方法，在采油所产生的含油污水实现全部回注不外排的基础上，再加上钻井废水不外排处理，从此做到了防治环境污染。     

石油开采含油废水处理技术的探讨

油田开发生产过程中产生和排放的含油废水含有多种污染物，对生态环境造成严重污染。对油田含油废水应用三段法治理工艺，混凝、沉淀、过滤综合处理油田含油废水，处理后的水质达到回注水水质要求，全部回注，研究探讨了高矿化度含油废水的治理。     

榆林气田污水回注井极限注入能力预测分析

气田生产为了减少气田采出水对地表环境的污染，及补充气藏能量，将污水进行沉淀、过滤等处理后，常回注至废弃气井或专门的回注井。文章以容积法和渗流法两种方法，分别建立模型，对气田回注井的 极限注入量、剩余可注入量、可回注年限进行预测，以榆林气田某区块两口污水回注井为例，选用回注井储层物 性、回注井回注动态数据，进行计算和验证，并对比了两种预测结果。研究结果明确了气田污水回注井回注特征与规律，为提升回注工艺的应用效果提供了相应的理论依据。     

国内外油田地下灌注环境保护管理剖析

地下灌注是采油废水的一种重要处理处置方法,目前国内针对地下灌注的法律法规和标准尚处于空白状态,文章较为详细地说明了美国和加拿大在水污染、地下灌注、有害固体废物处置方面的法律法规要求,简要介绍了欧盟和英国对地下灌注的环保管理。在调研国内关于地下灌注相关法律法规现状及标准研究的基础上,指出应从环境污染防治和环境风险防控角度制定相关政策和标准、规范,提出我国在油田回注回灌法律法规和标准制定方面的建议。     

川西地区气田废水处理技术及应用

简要介绍了川西地区气田废水的水质特征,阐述了物理及化学处理、生物处理、气田废水回注在川西地区的应用,其中齐福废水处理站经过物理及化学处理之后、袁家废水处理站经过生物处理后,基本达到了《污水综合排放标准》(GB8978-1996),并对川西气田废水处理技术的发展做了展望。     

鄯善油田含油污水处理及回注技术

含油污水必须经过处理达到油田注水水质控制指标才能回注，为尽快将油田污水处理合格后回注地层，吐哈油田先后采用重力式污水处理流程，以及现在的诱导浮选——全自动双德料过滤等方法进行了现场含油污水处理技术的实践，处理后水质达到低渗透油田回注标准，并实施了回注。概述了都善油田污水处理系统试运行及技术改造的实践过程及效果。     

高含硫气田气井产出水深度处理探索与实践

文章主要探索pH≤7.0时,pH7.0时,气井产出水整体设计工艺流程,确保气井产出水满足GB 8978—1996《污水综合排放标准》、SY/T 6596—2004《气田水回注方法》和GB 5044—2005《农田灌溉水标准》推荐水质指标的标准。该项目实施后,可减少高含盐、高含硫采气废水对环境的污染,废水减注量80%以上,形成高含硫天然气井废水撬装深度处理成套技术,解决偏远单井产出水的排放问题,缓解回注压力,实现就地处理。该项目的推广应用,将在油气田产生显著的环保效益。     

长庆油田压裂废水回收再利用方式探讨

针对长庆油田压裂作业用水量大与废水产生量大产生的环保压力与水量消耗量大的问题,通过对废水特征的分析以及对油田生产现状的调研,以回收再利用为目标,提出废水处理后作为油田回注用水、配制压裂液用水和配制聚合物溶液用水的再利用方式,分别分析了三种方式的用水要求,简要介绍了相应的处理方法,对油田废水处理与再利用研究有一定的借鉴作用。     

生活污水可以饮用吗?——地下水人工回灌技术简述

本文简述了处理废水的人工回灌技术,同时介绍了该技术的安全性,处理废水中的有害物质及微量过滤设备的前景。     

地下水人工回灌技术简述

本文简述了处理废水的人工回灌技术,介绍了该技术的安全性,处理废水过程中的有害物质及微量过滤设备的前景。     

Integrating waste,manufacturing and industrial symbiosis: an analysis of recycling,remanufacturing and waste treatment firms in Texas

The continually increasing volume of the waste stream has led to numerous calls for strategies to close the loop on material use through industrial symbiosis strategies which direct used material and products (wastes) back to production processes. By use of a survey of recycling, remanufacturing and waste treatment firms in Texas, this paper asks if these firms can operate as a bridge between production and consumption/waste to efficiently increase the flow of used materials and products back to production processes at the local level. The results suggest that while most materials and used products are collected locally, only some can be re(consumed) locally. Moreover, the firms face negative perceptions about their activities from industry and the public at large that likely slow both the rate of entry of new firms into these markets and the expansion possibilities of existing firms. In addition, the types of conventions that characterize the interactions of more successful firms are not well developed in this sector(s). It is unlikely that recycling, remanufacturing and waste treatment firms can become central players in the production, consumption and waste cycle loop until society develops production design, marketing and consumption philosophies that include recycling and remanufacturing at a fundamental level.     

Integrating waste, manufacturing and industrial symbiosis: an analysis of recycling, remanufacturing and waste treatment firms in Texas

The continually increasing volume of the waste stream has led to numerous calls for strategies to close the loop on material use through industrial symbiosis strategies which direct used material and products (wastes) back to production processes. By use of a survey of recycling, remanufacturing and waste treatment firms in Texas, this paper asks if these firms can operate as a bridge between production and consumption/waste to efficiently increase the flow of used materials and products back to production processes at the local level. The results suggest that while most materials and used products are collected locally, only some can be re(consumed) locally. Moreover, the firms face negative perceptions about their activities from industry and the public at large that likely slow both the rate of entry of new firms into these markets and the expansion possibilities of existing firms. In addition, the types of conventions that characterize the interactions of more successful firms are not well developed in this sector(s). It is unlikely that recycling, remanufacturing and waste treatment firms can become central players in the production, consumption and waste cycle loop until society develops production design, marketing and consumption philosophies that include recycling and remanufacturing at a fundamental level.     

改性PVDF中空纤维膜处理压裂返排液研究

针对中空纤维膜应用于水力压裂返排液处理时存在的膜污染严重、通量衰减快、影响处理效率等问题,研究了PVDF固含量、凝固浴温度等因素对PVDF膜性能的影响,通过非溶剂致相分离法制备了PVDF中空纤维膜,并采用表面接枝技术,对PVDF中空纤维膜进行了表面亲水化改性。压裂返排液吸附实验结果表明,表面接枝降低了PVDF的接触角,提高了膜的亲水性。与未接枝改性的PVDF膜相比,亲水改性后的PVDF膜表面吸附的压裂返排液更少。将亲水性中空纤维膜用于页岩气水力压裂返排液的过滤处理,应用结果表明其对压裂返排液中的总铁、SS、浊度、细菌去除率达到90%以上,长时间运行后的通量保持率高,有较好的抗膜污染性。     

许昌市发制品行业的清洁生产调查

发制品行业是以人发、人造纤维等为原材料进行假发加工的行业。许昌市发制品的生产过程大致可分为两个阶段:漂染和前后处理。漂染过程用水量大,产生的废水难以处理。其中过酸、氧化、染色配置的溶液使用一次后直接排放,不符合清洁生产要求,且所排放的溶液可考虑中和多次利用。漂染过程水资源消耗量大,废水产生量大,没有考虑废水综合利用。按清洁生产的要求在以上环节可通过技术革新和设备改造得以改进。     

深度氧化技术处理有机废水的研究进展

利用深度氧化技术处理有机废水是目前国内外废水处理的新技术,在美国和欧洲等发达国家,该技术已应用于各种废水和饮用水处理过程。针对我国石油、石化企业在外排废水中所含有毒有害有机物质大多难以降解的特点,经过调研,详细介绍了深度氧化技术处理有机废水的研究进展,并着重探讨了在光催化氧化技术、超声降解技术、超临界水氧化技术、湿式氧化技术等方面所做的工作及深度氧化过程除去水中有机污染物的原理。     

The Hourglass: A Conceptual Framework for the Transport of Biologically Active Compounds from Agricultural Landscapes

Recent research has suggested that the fate of biologically active compounds (BACs) originating from point sources such as wastewater treatment plants is fundamentally different from that of similar compounds released from nonpoint sources through runoff from agricultural landscapes. Downstream from wastewater treatment plants, BACs will degrade via a variety of mechanisms; however, their concentration in the water adjacent to the point of discharge may not decrease over time, as the compounds are continually released. In contrast, in agricultural systems, BACs are episodically introduced to surface water during snowmelt and rainstorm events, and under these circumstances, may be found in water for only hours or days after a storm event. Recent research in our laboratories as well as others, has suggested that sediments play an important role in the persistence of herbicides and steroids in watersheds after nonpoint source loading events. Conceptually, the sediment serves as both a sink and a source, equilibrating with BACs during storm events then slowly releasing them back into the water over time, long after the initial pulse of chemicals has moved downstream.     

Landfill Bioreactor Cells as Ecofilters for Extraction of Bio-energy and Nutrients from Solid Wastes

This paper describes a modified, ecologically based waste treatment technique, where municipal solid waste is anaerobically treated in landfill reactorcells in a way that both bio-energy and nutrients can be recovered. The controlled landfill reactorcell ('bioreactor-cell') serves as an anaerobic filter, where energy is extracted as biogas while nutrients are recovered through the leachates. The leachates can be used as fertilizer in e.g. energy forests within the controlled landfill area, and thus nutrients can be brought back into an ecocycle. At the same time anaerobic conditions result in an effective immobilization of heavy metals and other pollutants, e.g. through complexation to organic matter or as insoluble metal sulphides, which are immobilized in the fermentation residue. The long-lived organic fraction, remaining after the fermentation process has declined, containing a high content of lignine, serves as a water-holding matrix. Thus it helps to enforce a sustainable high moisture level, resulting in sustainable anaerobic conditions with heavy metals retained on a long-term basis. Also non-degradable products, like plastics, help to shield off oxygen and maintain reliable anaerobic conditions. Landfilling of organic matter under anaerobic conditions is a measure to counteract increasing concentrations of CO₂ in the atmosphere, resulting from human activities. A small fraction of the organic matter is long-term accumulated in the landfill, and the processes can be compared to those of natural wetlands.     

稠油污水深度处理与回用技术探讨

文章介绍了新疆油田在稠油污水处理和回用方面的关键技术和成熟经验,采用强酸性树脂软化技术和化学清洗技术实现了稠油污水回用注汽锅炉。六九区污水处理站采用高效水质稳定技术,使处理后的污水达到了GB 8978—1996《污水综合排放标准》的二级标准,稠油污水在处理后符合GB 1576—2008《工业锅炉水质》的要求,大幅度降低了注汽锅炉的运行成本;将60℃以上的稠油污水替代清水回注稀油油藏,热水驱油,改善了驱油效果,同时根据污水温度较高的特点,对注水井井口的保温工艺进行改进,实现了稠油污水热能的综合利用,为油田污水治理和回用提供了借鉴。     

Efficacy and safety of new TAMMEF (therapeutic application of musically modulated electromagnetic fields) system in the treatment of chronic low back pain

Numerous studies have demonstrated the utility of extremely low frequencies (ELF) electromagnetic fields in the treatment of pain. Moreover, the effects of these fields seems to depend on their respective codes. In our study we want to value the effects and the safety of the TAMMEF (Therapeutic Application of a Musically Modulated Electromagnetic Field) system, which field is piloted by a musical signal and its parameters are modified in time, randomly varying within the respective ranges, so that all possible codes can occur during a single application. Ninety subjects, affected by chronic low back pain, were enrolled in the study and randomly divided into three groups of 30 patients each: A exposed to TAMMEF, B exposed to ELF, C exposed to a simulated field. All subjects underwent a cycle of 15 daily sessions of 30 minutes each and a clinical examination upon enrolment, after 7 days of therapy, at the end of the cycle and at a follow-up 30 days later. All the patients of groups A and B completed the therapy without the appearance of side effects: they presented a significant improvement of the subjective pain and the functional limitation, which remained stable at the follow-up examination. In group C, there was no improvement of the pain symptoms or articular functionality. This study suggests that the TAMMEF system is efficacious and safe in the treatment of patients with chronic low back pain.     

Greening of production in metal processing industry through process modifications and improved management practices

Although it was indicated through various studies from around the world that resource efficiency can be adapted in metal processing plants, a very limited number of projects could be realized in Turkish metal processing industry so far. In this study it was aimed at investigating process modifications and management practices to increase water and chemical use efficiency thus increasing environmental and economic performance of a metal processing company. As a result of the applications in heat treatment and zinc phosphating processes total water consumption of the company was reduced by 34.1% corresponding to an annual water saving of 18,831 m³. Moreover, total chemical consumption in zinc phosphating as one of the most chemical intensive processes in the company, was decreased by 1401 kg/year (26.1%). Applications in zinc phosphating process led to a significant decrease in the amount of treated wastewater and wastewater treatment sludge which is labelled as hazardous waste according to national legislations. Total wastewater generation was decreased by 3255 m³/year (50.9%) while wastewater treatment sludge was reduced 4656 kg/year (16.9%). Moreover, energy consumption of the company was reduced by 32.647 kW h/year which corresponds to 36% energy saving in water pumping. Implementation cost of the applications were 34,233$ which is calculated to be paid back in 2.3 years. This study is expected to fill a gap in Turkey by demonstrating that environmental performance in metal processing industry could be improved by process modifications and improved management practices resulting in tangible economic gains.