Synthesis,Characterization and Application of Biodegradable Crosslinked Carboxymethyl Chitosan/Poly(Ethylene Glycol) Clay Nanocomposites

Crosslinked carboxymethyl chitosan (CMCh)/poly(ethylene glycol) (PEG) nanocomposites were synthesized using terephthaloyl diisothiocyanate as a crosslinking agent, in presence of montmorillonite (MMT), in different weight ratios of the two matrices. Characterization of nanocomposites was performed using different analyses. Swelling behavior was studied in different buffered solutions. It was found that formation of crosslinked CMCh/PEG nanocomposites increased the swell ability. Metal ions adsorption had also been investigated. The results indicated that crosslinked CMCh adsorbs various metal ions much more than non-crosslinked CMCh. Antimicrobial activity was examined against Gram-positive bacteria (S. aureus (RCMB 010027) and S. Pyogens (RCMB 010015), Gram-negative bacteria (E. coli (RCMB 010056), and also against fungi (A. fumigates (RCMBA 02564, G. candidum (RCMB 05096) and C. albicans (RCMB 05035). Data indicated that most of these nanocomposites exhibited good antimicrobial potency. Degradation studies were carried out in simulated body fluid for different time periods in order to find out the degradation index. Results showed that weight loss (%) of most of the nanocomposites increased as a function of incubation time.     

Evaluation of the adsorption behavior of mixed perfluoroalkyl and polyfluoroalkyl substances onto granular activated carbon and styrene-divinylbenzene resins

Because of the remarkable chemical structure of perfluoroalkyl and polyfluoroalkyl substances (PFAS), as well as the complex conditions of water, selecting an appropriate adsorbent for treating PFAS is critical. Adsorption needs to be environmentally friendly, low cost, and consider the types of adsorbents that work well in mixed PFAS solutions. In the present study, we used mixed PFAS to estimate the PFAS activity. This research aimed to evaluate and compare the efficacy of the adsorption of PFAS from water using different adsorbents: granular activated carbon (GAC), IRA 910 (strong anion resin), and DOWEX MB-50 (mixed exchange resin). Batch adsorption isotherms and kinetic studies were performed for perfluorooctanoic acid (PFOA), perfluorooctane sulfonic acid (PFOS), and perfluorohexane sulfonic acid (PFHxS). Freundlich models consistently described the kinetic behavior with a high correlation coefficient (R² > 0.98). PFAS adsorption capacities on GAC and IRA910 were dependent on the chain length (PFOS > PFOA > PFHxS). The adsorption capacity of DOWEX MB-50 decreased because of the sulfonate effects (PFOS > PFHxS > PFOA). The rate constants (k₂) that represented the adsorption of PFAS on different adsorbents observed within 96 h were accurately determined by the pseudo-second-order (PSO) model. GAC achieved followed the relationship k₂(PFOS) > k₂(PFOA) > k₂(PFHxS). Furthermore, k₂ of IRA910 decreased in the order of k₂(PFOA) > k₂(PFOS) > k₂(PFHxS), implying that IRA910 promoted hydrophobicity more significantly on the adsorption of PFCAs than perfluoroalkane (-alkyl) sulfonic acids. The kinetics of DOWEX MB-50 revealed k₂(PFHxS) > k₂(PFOS) > k₂(PFOA) because gel-type resins like DOWEX MB-50 are more suitable for shorter-chain PFAS. Further investigation is needed to determine the effect of organic matter under natural conditions and evaluate adsorptive selection caused by operational complexities.     

Response surface analysis of effects of hydraulic retention time and influent feed concentration on performance of an UASFF bioreactor

The interactive effects of hydraulic retention time (HRT) and influent chemical oxygen demand (COD_in) on the performance of an up-flow anaerobic sludge fixed film (UASFF) bioreactor treating palm oil mill effluent (POME) was studied. Anaerobic digestion of POME was modeled and analyzed with two variables i.e. HRT and COD_in. Experiments were conducted based on a general factorial design and analyzed using response surface methodology (RSM). The region of exploration for digestion of POME was taken as the area enclosed by HRT (1–6 days) and COD_in (5260–34,725 mg/l) boundaries. Eight dependent parameters were either directly measured or calculated as response. Increase in the variables resulted in decrease in COD removal efficiency, solid retention time (SRT) and sludge retention factor (SRF) and increase of COD removal rate, volatile fatty acid to alkalinity ratio (VFA/Alk), CO₂ percentage in biogas and methane production rate. The value of the maximum specific microbial growth rate (μ_m) determined through the equation that correlated organic loading rate (OLR) and μ (calculated by quadratic model for SRF) was found to be 0.153 d^?1. This value was close to that obtained using Chen and Hashimoto kinetic equation (0.207 d^?1) in a previous study. The present study provides valuable information about interrelations of quality and process parameters in POME digestion using a UASFF bioreactor.     

Bacterial Poly(Hydroxyalkanoate) Polymer Production from the Biodiesel Co-product Stream

A co-product stream from soy-based biodiesel production (CSBP) containing glycerol, fatty acid soaps, and residual fatty acid methyl esters (FAME) was utilized as a fermentation feedstock for the bacterial synthesis of poly(3-hydroxybutyrate) (PHB) and medium-chain-length poly(hydroxyalkanoate) (mcl-PHA) polymers. Pseudomonas oleovorans NRRL B-14682 and P. corrugata 388 grew and synthesized PHB and mcl-PHA, respectively, when cultivated in up to 5% (w/v) CSBP. In shake flask culture, P. oleovorans grew to 1.3 ± 0.1 g/L (PHA cellular productivity = 13–27% of the bacterial cell dry weight; CDW) regardless of the initial CSBP concentration, whereas P. corrugata reached maximum cell yields of 2.1 g/L at 1% CSBP, which tapered off to 1.7 g/L as the CSBP media concentration was increased to 5% (maximum PHA cellular productivity = 42% of the CDW at 3% CSBP). While P. oleovorans synthesized PHB from CSBP, P. corrugata produced mcl-PHA consisting primarily of 3-hydroxyoctanoic acid (C_8:0; 39 ± 2 mol%), 3-hydroxydecanoic acid (C_10:0; 26 ± 2 mol%) and 3-hydroxytetradecadienoic acid (C_14:2; 15 ± 1 mol%). The molar mass (M_n) of the PHB polymer decreased by 53% as the initial CSBP culture concentration was increased from 1% to 5% (w/v). In contrast, the M_n of the mcl-PHA polymer produced by P. corrugata remained constant over the range of CSBP concentrations used.     

Electrospun ZnO Nanoparticles Doped Core–Sheath Nanofibers: Characterization and Antimicrobial Properties

Coaxial electrospinning technique was used to fabricate the core–sheath composite nanofibers of ZnO nanoparticle (Nps) (10%, 20% w/w) doped polymethyl methacrylate (PMMA) (as sheath) and polyvinyl alcohol (PVA) (as core). Fourier transform infrared (FT-IR) spectra were confirmed the weak forces arise between ZnO Nps, PMMA and PVA matrixes. The hexagonal (wurtzite) structure of ZnO Nps with ~?30.8 nm of diameter was confirmed from the X-ray diffraction pattern. The morphology and microstructure of core–sheath composite nanofibers were confirmed from the scanning electron microscopy (SEM) and transmission electron microscopy (TEM). It is clearly seen from the TEM images that the PMMA encapsulate the PVA core. Core–sheath composite nanofibers were assessed against Escherichia coli (E. coli) and Bacillus subtilis (B. subtilis) bacteria through quantitative, disk diffusion and viable cell count methods. It was found that ZnO Nps doped core–sheath nanofibers were effectively inhibit the growth of gram positive bacteria, B. subtilis.     

Treatment of urban stormwater for dissolved pollutants: A comparative study of natural organic filter media

Sorption capacities were evaluated for the dissolved stormwater (SW) pollutants onto two tree mulches and jute fiber. SW spiked with predetermined concentrations of copper (Cu), cadmium (Cd), hexavalent chromium (Cr ⁺⁶), lead (Pb), zinc (Zn), and benzo[a]pyrene (B[a]P), naphthalene (NP), fluoranthene (FA), 1,3‐dichlorobenzene (DCB), and butylbenzylphthalate (BBP) were used in this study. Each medium removed close to 100 percent of all the pollutants at the concentrations studied. Sorption capacities (μg/g) of the three organic media were in the order of jute > hardwood mulch > softwood mulch, and on a mole basis, both the heavy metals and the toxic organics were sorbed by the three media in an identical sequence: Cr ⁺⁶ > Cu, Zn > Cd > Pb; and NP > DCB > FA > B[a]P > BBP. Sorption capacities of the hardwood wood mulch and jute fiber for the pollutants were correlated with distinctive physical properties of the pollutants. © 2005 Wiley Periodicals, Inc.     

Aging of Toughened Polylactic Acid Nanocomposites: Water Absorption,Hygrothermal Degradation and Soil Burial Analysis

The environmental aging behaviour of montmorillonite (MMT) filled polylactic acid (PLA) nanocomposites (PLA/MMT) and linear low density polyethylene (LLDPE)-toughened PLA (PLA/LLDPE ratio = 90/10) nanocomposites (PLA/LLDPE/MMT) were investigated in this study. The nanocomposites were subjected to water absorption, hygrothermal degradation and soil burial analysis. Both PLA/MMT and PLA/LLDPE/MMT nanocomposites were immersed in distilled water at three different temperatures (room temperature, 60, and 90 °C) and the weight difference before and after immersion was calculated. The kinetics of water absorption for both nanocomposites followed the Fick’s second law of diffusion, where a linear relationship exists between the initial moisture absorption at any time t and t ^1/2 (the square root of time), followed by a horizontal plateau (saturation). The equilibrium moisture content (M _m ) and diffusion coefficient (D) of PLA nanocomposites increased with the addition of MMT (2 phr) and LLDPE. However, the D values of both nanocomposites decreased by increasing MMT (4 phr). The M _m for PLA/MMT and PLA/LLDPE/MMT nanocomposites increased by increasing immersion temperature (60 °C) and prolonged immersion resulted in hygrothermal degradation of both nanocomposites. The hygrothermal degradation studies showed that PLA degrades much faster at 90 °C as compared to 60 °C in both the nanocomposites. The addition of MMT and LLDPE improved the hygrothermal stability of PLA in both nanocomposites. Soil burial test revealed deterioration of impact strength in all samples while the rate of biodegradation was retarded in the presence of MMT and LLDPE.     

Emission of volatile sulfur compounds during composting of municipal solid waste (MSW)

Volatile sulfur compounds (VSCs) are the main source for malodor from composting plants. In this study, the VSCs generated from composting of 15–80 mm municipal solid waste (T0), kitchen waste (T1) and kitchen waste mixed dry cornstalks (T2) were measured in 60 L reactors with forced aeration for a period of 30 days. The VSCs detected in all treatments were hydrogen sulfide (H₂S), methyl mercaptan (MM), dimethyl sulfide (DMS), carbon bisulfide (CS₂) and dimethyl disulfide (DMDS). Over 90% of the VSCs emissions occurred during the first 15 days, and reached their peak values at days 4–7. The emission profiles of five VSCs species were significantly correlated with internal materials temperature and outlet O₂ concentration (p < 0.05). Total emissions of the VSCs were 216.1, 379.3 and 126.0 mg kg^?1 (dry matter) for T0, T1 and T2, respectively. Among the five VSCs, H₂S was the most abundant compound with 39.0–43.0% of total VSCs released. Composting of kitchen waste from separate collection posed a negative influence on the VSC and leachate production because of its high moisture content. An addition of dry cornstalks at a mixing ratio of 4:1 (wet weight) could significantly reduce the VSCs emissions and avoid leachate. Compared to pure kitchen waste, VSCs were reduced 66.8%.     

A Processing,Characterization and Marine Biodegradation Study of Melt-Extruded Polyhydroxyalkanoate (PHA) Films

A series of polyhydroxyalkanoates (PHA), all containing 1% nucleating agent but varying in structure, were melt-processed into films through single screw extrusion techniques. This series consisted of three polyhydroxybutyrate (PHB) and three polyhydroxybutyrate-valerate (PHBV) resins with varying valerate content. Processing parameters of temperature in the barrel (165–173 °C) and chill rolls (60 °C) were optimized to obtain cast films. The gel-permeation chromatography (GPC) results showed a loss of 8–19% of the polymer’s initial molecular weight due to extrusion processing. Modulated differential scanning calorimetry (MDSC) displayed glass transition temperatures of the films ranging from −4.6 to 6.7 °C depending on the amount of crystallinity in the film. DSC data were also used to calculate the percent crystallinity of each sample and slightly higher crystallinity was observed in the PHBV series of samples. X-ray diffraction patterns did not vary significantly for any of the samples and crystallinity was confirmed with X-ray data. Dynamic mechanical analysis (DMA) verified the glass transition trends for the films from DSC while loss modulus (E′) reported at 20 °C showed that the PHBV (3,950–3,600 MPa) had the higher E′ values than the PHB (3,500–2,698 MPa) samples. The Young’s modulus values of the PHB and PHBV samples ranged from 700 to 900 MPa and 900 to 1,500 MPa, respectively. Polarized light microscopy images revealed gel particles in the films processed through single-screw extrusion, which may have caused diminished Young’s modulus and tensile strength of these films. The PHBV film samples exhibited the greatest barrier properties to oxygen and water vapor when compared to the PHB film samples. The average oxygen transmission rate (OTR) and water vapor transmission rate (WVTR) for the PHBV samples was 247 (cc-mil/m²-day) and 118 (g-mil/m²-day), respectively; while the average OTR and WVTR for the PHB samples was 350 (cc-mil/m²-day) and 178 (g-mil/m²-day), respectively. Biodegradation data of the films in the marine environment demonstrated that all PHA film samples achieved a minimum of 70% mineralization in 40 days when run in accordance with ASTM 6691. For static and dynamic incubation experiments in seawater, microbial action resulting in weight loss as a function of time showed all samples to be highly biodegradable and correlated with the ASTM 6691 biodegradation data.     

Sorting efficiency and combustion properties of municipal solid waste during bio-drying

One aerobic and two combined bio-drying processes were set up to investigate the quantitative relationships of sorting efficiency and combustion properties with organics degradation and water removal during bio-drying. Results showed that the bio-drying could enhance the sorting efficiency of municipal solid waste (MSW) up to 71% from the initial of 34%. The sorting efficiency was correlated with water content negatively (correlation coefficient, r = −0.89) and organics degradation rate positively (r = 0.92). The higher heating values (HHVs) were correlated with organics degradation negatively for FP (i.e. the sum of only food and paper) (r = −0.93) but positively for the mixing waste (MW) (r = 0.90), whereas the lower heating values (LHVs) were negatively correlated with water content for both FP (r = −0.71) and MW (r = −0.96). Other combustion properties depended on organics degradation performance, except for ignition performance and combustion rate. The LHVs could be greatly enhanced by the combined process with insufficient aeration during the hydrolytic stage. Compared with FP, MW had higher LHVs and ratios of volatile matter to fixed carbon. Nevertheless, FP had higher final burnout values than MW.     

Microbial Poly(L-Lactide)-Degrading Enzyme Induced by Amino Acids, Peptides, and Poly(L-Amino Acids)

Poly(L-lactide)(PLA)-degrading activities of a fungus, Tritirachium album, and two strains of actinomycetes,Lentzea waywayandensis and Amycolatopsis orientalis, were inducible by some proteins (poly-L-amino acid), peptides and amino acids. Extracellular PLA-degrading activity of the culture filtrates was detected when these strains grew in liquid basal medium containing 0.1% (w/v) of (poly-L-amino acids), peptides or amino acids as the enzyme inducer. In addition to PLA-degrading activity, succinyl-(L-alanyl-L-alanyl-L-alanine)-p-nitroanilide (Suc-(Ala)₃-pNA)-degrading activity was observed, implying that the enzymes produced were protease-type. The enzyme activities produced varied between different strains and different inducers. Silk fibroin was the best inducer for A. orientalis and that elastin was the best inducer for L. waywayandensis and T. album.     

Bioprocess technology for coal washery effluent treatment by Lemna minor

Duckweed species are promising macrophytes that can be used in wastewater treatment due to their rapid growth, ease of harvest, low fiber feed potential, and high protein contents. Waste‐water contaminants that are likely to be generated during washing of coal are total suspended solids (TSS), chemical oxygen demand (COD), acidity or alkalinity (pH), and metallic contaminants. Bioprocesses were developed to evaluate the potential of duckweed (Lemna minor) to treat coal washery effluent (CWE) as well as to study the impact on the biochemical changes of the Lemna minor. CWE samples were diluted with distilled water (DW) in different ratios as follows: T1‐CWE:DW(20:80%), T2‐CWE:DW(40:60%), T3‐CWE:DW(60:40%), T4‐CWE:DW (80:20%), T5‐CWE (100%), and Control‐DW(100%). The electrical conductivity of the effluent treated with Lemna minor was 0.035 deciSiemens per meter (dS/m) in the control at Day 10 and substantially higher at treatment ratios of 100, 80, and 60 percent (1.754, 1.842, and 1.631 dS/m). The highest amount of TSS was observed at test ratio T5 (38,834 mg/L), followed by T4 (28,816 mg/L), T3 (26,970 mg/L), T2 (15,320 mg/L), T1 (4,524 mg/L), and control (424 mg/L). Total hardness was higher (820 mg/L) in T4 compared to the control (220 mg/L). Total hardness of the effluent decreased after 30 days of incubation in all the treatment aliquots. The CWE at 20 percent concentration increased the duckweed population and no adverse impacts on its growth were observed. At higher concentration (T5) total mortality of Lemna minor was observed. The chlorophyll production was determined to be inversely proportional to the effluent concentration. Based on this study, it is concluded that Lemna minor can be used for treating CWE after dilution with fresh water.     

Heavy metals in wastewater: Modelling the hydroxide precipitation of copper(II) from wastewater using lime as the precipitant

The effect of effluent composition (Cl⁻, SO₄²⁻ or CO₃²⁻) on the efficiency of the hydroxide precipitation of Cu(II) modelling lime (CaO) as the precipitant has been predicted using the solubility domain approach and has been experimentally validated. Solubility domains were based on the phases that were found to be solubility-limiting for systems representing potential effluent chemical composition limits. The generated solubility domains generally encompassed the experimentally observed solubilities, thereby providing effluent treatment quality assurance ranges for the hydroxide precipitation process. The presence of gypsum (CaSO₄.2H₂O) and calcite (CaCO₃) as secondary precipitates had little effect on the observed residual Cu(II) solubilities, with Cu(II) mobility being governed by the least-soluble kinetically precipitated (rather than thermodynamically favoured) phase in the system under study.     

Accumulation of Heavy Metals by in vitro cultures of plants

The aim of the project is to study heavy metals accumulation by the selected plants in both laboratory and field conditions. Within the experiments the aspen (Populus tremula × tremuloides), sunflower (Helianthus annuus) and corn (Zea mays) plants were studied. The reasons for this selection were: a fast growth of these plants, an accumulation capacity and an ability to survive in different types of soils. The study was carried out on the aspen plantlets grown in vitro. The plants were exposed to the aqueous solutions having concentrations 0.1 mM, 0.5 mM of Pb²⁺ or Ni²⁺, respectively. The accumulation capacityfor aspen, was about 70% of Pb²⁺ originally present in the solution. The starting concentration of Pb²⁺ (0.5 mM) exhibited no negative impact on the growth. Besides in vitro expositions, a pilot-scale phytoremediation experiment was carried out at the polluted industrial area (Zn – 75000 mg/kg), (Pb – 16000 mg/kg), (Cr – 590 mg/kg), (Cd – 90 mg/kg) and (Cu – 1700 mg/kg).     

Effect of Poly(dioxolane) as Compatibilizer in Poly(ɛ-caprolactone)/Tapioca Starch Blends

The influence of poly(dioxolane) (PDXL), a poly(ethylene oxide-alt-methylene oxide), as compatibilizer on poly(ɛ-caprolactone) (PCL)/tapioca starch (TS) blends was studied. In order to facilitate blending; PCL, PDXL and TS must be blended together directly; so that PDXL is partially adhered at the TS surface as shown by scanning electron microscopy. The molecular weight effect of PDXL on the PCL/TS blends showed that mechanical properties of PCL/TS/PDXL blends from low molecular weight (M _n=10,000) and high molecular weight (M _n=200,000) PDXL were rather dependent on TS content. The enzymatic degradability of PCL/TS/PDXL blends using α-amylase increased as the TS content increased but was independent on the dispersion of tapioca starch in the PCL matrix.     

Application of ameliorated wood pulp to recover Cd(II), Pb(II), and Ni(II) from e-waste

In this study, dl-malic acid and hydrogen peroxide were used as leaching agents to remove metals from e-waste (printed-circuit boards) and itaconic acid-grafted poly(vinyl alcohol)-encapsulated wood pulp (IA-g-PVA-en-WP) to uptake metals from leachate with high proficiency [11.63 mg g^?1; 93.03 % for Cd(II), 11.90 mg g^?1; 95.18 % for Pb(II), and 12.14 mg g^?1; 97.08 % for Ni(II)]. Metals were recovered from the loaded biosorbent by desorption studies. The standard analytical techniques, such as elemental analysis, Fourier-transform-infrared spectroscopy, scanning electron microscopy, atomic force microscopy, and thermogravimetric analysis, were used to characterize the recovering agent (biosorbent). At equilibrium, the metal uptake data were fitted to Langmuir and D–R isotherms (R ² > 0.99) significantly, revealing, the homogeneous distribution of active sites on biosorbent’s backbone. The possible mechanism appeared to be ion exchanges of metal ions with H⁺ together with binding over functionalities (COO^?). Dimensionless equilibrium parameter (R _L) showed the favourability of metal uptake at lower concentration, while mean adsorption energy (E) certified the physical binding of metal on functionalities which was further confirmed by sticking probability and activation energy parameters. Reusability studies were also conducted to state the performance of biosorbent.     

Pseudomonas lemoignei has five poly(hydroxyalkanoic acid) (PHA) depolymerase genes: A comparative study of bacterial and eukaryotic PHA depolymerases

Four polyhydroxyalkanoate (PHA) depolymerases were purified from the culture fluid ofPseudomonas lemoignei: poly(3-hydroxybutyrate) (PHB), depolymerase A (M _r , 55,000), and PHB depolymerase B (M _r , 67,000) were specific for PHB and copolymers of 3-hydroxybutyrate (3HB) and 3-hydroxyvalerate (3HV) as substrates. The third depolymerase additionally hydrolyzed poly(3-hydroxyvalerate) (PHV) at high rates (PHV depolymerase;M _r , 54,000). The N-terminal amino acid sequences of the three purified proteins, of a fourth partially purified depolymerase (PHB depolymerase C), and of the PHB depolymerases ofComamonas sp. were determined. Four PHA depolymerase genes ofP. lemoignei (phaZ1,phaZ2,phaZ3, andphaZ4) have been cloned inEscherichia coli, and the nucleotide sequence ofphaZ1 has been determined recently (D. Jendrossek, B. Müller, and H. G. Schlegel,Eur. J. Biochem. 218, 701–710, 1993). In this study the nucleotide sequences ofphaZ2 andphaZ3 were determined.PhaZ1,phaZ2, andphaZ4 were identified to encode PHB depolymerase C, PHB depolymerase B, and PHV depolymerase, respectively.PhaZ3 coded for a novel PHB depolymerase ofP. lemoignei, named PHB depolymerase D. None of the four genes harbored the PHB depolymerase A gene, which is predicted to be encoded by a fifth depolymerase gene ofP. lemoignei (phaZ5) and which has not been cloned yet. The deduced amino acid sequences ofphaZ1–phaZ3 revealed high homologies to each other (68–72%) and medium homologies to the PHB depolymerase gene ofAlcaligenes faecalis T₁ (25–34%). Typical leader peptide amino acid sequences, lipase consensus sequences (Gly-Xaa-Ser-Xaa-Gly), and unusually high proportions of threonine near the C terminus were found in PhaZ1, PhaZ2, and PhaZ3. Considering the biochemical data of the purified proteins and the amino acid sequences, PHA depolymerases ofP. lemoignei are most probably serine hydrolases containing a catalytical triad of Asp, His, and Ser similar to that of lipases. A comparison of biochemical and genetic data of various eubacterial and one eukaryotic PHA depolymerases is provided also.Paper presented at the Bio/Environmentally Degradable Polymer Society—Second National Meeting, August 19–21, 1993, Chicago, Illinois.     

Spreadsheet‐Based Design Tool for In Situ Anaerobic Bioremediation Using Soluble Substrate

A Microsoft Excel spreadsheet‐based design tool has been developed to assist remediation professionals in the design of injection systems for distributing soluble substrate (SS) to enhance in situ anaerobic bioremediation. The user provides site data, design parameters, and unit‐cost information to generate estimates of remediation‐system cost and steady‐state contact efficiency (CE_SS) for various designs. CE_SS is estimated from a nonlinear regression equation that includes terms for the SS injection concentration (C_I), minimum substrate concentration (C_MIN), groundwater travel time between rows of injection wells (T_T), SS half‐life (T_H), substrate reinjection time interval (T_R), and pore volumes of substrate solution injected (PV). With this tool, users can quickly compare the relative costs and performance of different injection alternatives and identify the best design for their specific site conditions. The design process embodied in the tool includes: (1) entering injection‐well configuration and unit costs for well installation, injection, and substrate; (2) determining treatment‐zone dimension; (3) selecting trial injection‐well spacing, time period between substrate reinjection, and injection pore volume; and (4) estimating contact efficiency and capital and life‐cycle costs. This process is then repeated until a final design is selected. In most cases, injection costs increase with increasing CE_SS. However, the best (highest) ratio of CE_SS to injection cost typically occurs for CE_SS in the range of 70 to 80 percent. © 2013 Wiley Periodicals, Inc.     

Organically Modified Nanoclay and Aluminum Hydroxide Incorporated Bionanocomposites towards Enhancement of Physico-mechanical and Thermal Properties of Lignocellulosic Structural Reinforcement

A range of bio-nanocomposites were prepared by incorporation of organo modified montmorillonite nanoclay (OMMT) with or without use of aluminum hydroxide (Al(OH)₃) within polylactic acid (PLA) solution. Furthermore, the solution was employed for modification of ligno-cellulosic (jute) fabric structural reinforcements. The successful incorporation of nanofillers within the host polymer, polylactic acid (PLA) was confirmed by Fourier-transform infrared spectroscopy (FT-IR). Water uptake and swelling behaviour studies revealed that the water uptake and swelling ratio of bio-composites reduced significantly as compared to pristine jute fabric, whereas upon incorporation of OMMT and Al(OH)₃, the water barrier properties reduced even further in the developed bio-nanocomposites. The flexural strength of the bio-nanocomposites also showed improved mechanical and dimensional stability. Synergistic effects of OMMT and Al(OH)₃ were observed in enhancing the aforementioned physico-mechanical properties. Scanning electron microscopy (SEM) studies revealed microstructural details of developed samples. Similarly, the thermo-gravimetric analysis and linear burning rate studies of Al(OH)₃ treated bio-nanocomposite materials revealed enhanced thermal resistance and reduced flammability respectively compared to both pristine woven jute fabric and fabrics treated with PLA alone or those without Al(OH)₃. From the above results it can safely be said that the bio-nanocomposite material can be a prospective candidate for development of flame retardant biopackaging.     

Laboratory appraisal of organic carbon changes in mixtures made with different inorganic wastes

Mixtures of organic and inorganic wastes were incubated to examine the changes in organic C (OC) contents. An anaerobic sludge and a CaO-treated aerobic sludge, with OC concentrations of 235 and 129 g kg^?1, were used. The inorganic wastes used – referred to as “conditioners” – were shot blasting scrap, fettling, Linz-Donawitz slag, foundry sand (FS), and fly ash from wood bark combustion (FA). The total OC (TOC) and ${\text{KMnO}}_4^{?}$ oxidized OC were determined. DTA-TGA profiles and FTIR spectra were also obtained. Mixtures made with the FS contained significantly lower (P < 0.05) amounts of TOC (45 g kg^?1) than the rest of mixtures, which was attributed to the non-existence of reactive surfaces in the conditioner and the increased aeration induced by this material. Those made with FA contained significantly higher (P < 0.05) amounts of TOC (170 g kg^?1), which was attributed to: (i) the addition of an extra source of C – black carbon (BC) – in the FA, and (ii) the inhibition of mineralization from the compounds present in this conditioner (e.g., amorphous aluminosilicates, BC). The results highlight the importance of the characteristics of the conditioners on the fate of the OM originating from the sludges.