二恶英的生成及污染控制

介绍了二恶英的性质、毒性、污染源以及排放趋势,重点论述了二恶英的生成影响因素与污染排放控制技术.二恶英的生成影响因素主要有炭源、氯源、温度、催化剂和氧源等.二恶英的污染排放控制技术则介绍了传统的去除技术和一些降解技术.     

二恶英的生成及污染控制

介绍了二恶英的性质、毒性、污染源以及排放趋势,重点论述了二恶英的生成影响因素与污染排放控制技术.二恶英的生成影响因素主要有炭源、氯源、温度、催化剂和氧源等.二恶英的污染排放控制技术则介绍了传统的去除技术和一些降解技术.     

Correlation of polychlorinated naphthalenes with polychlorinated dibenzofurans formed from waste incineration

Isomer composition of polychlorinated naphthalenes (PCNs) was measured for municipal waste incinerator fly ash samples and for emission samples produced from soot and copper-deposit experiments conducted at the United States Environmental Protection Agency (US-EPA). Two types of PCN isomer patterns were identified. One pattern contained specific PCN isomers in which chlorine atoms are substituted as if the peri(alpha-) position were dechlorinated from the higher chlorinated PCNs one by one. In another pattern, the isomers had a tendency for the chlorine atoms to assume successive positions on the naphthalene ring, which may be caused by specifically oriented chlorination. Some of these isomers increased, together with several polychlorinated dibenzofuran (PCDF) and a few polychlorinated dibenzo-p-dioxin (PCDD) isomers. The ratios between some specific PCN, PCDF, and PCDD isomers measured for the fly ash samples agree with those obtained from the soot and copper-deposit experiments. The observations suggest that these isomers were formed possibly from de novo synthesis utilizing the carbon structure contained in soot under the catalytic effect of a copper compound. Typical isomers for PCNs and PCDFs produced from incineration emissions were identified.     

Polychlorinated biphenyls and -naphthalenes in pine needles and soil from Poland--concentrations and patterns in view of long-term environmental monitoring

Pine needles were selected as cost effective and easy collectable matrices suitable for long-term monitoring of the lower troposphere pollution with polychlorinated biphenyls and polychlorinated naphthalenes. The fingerprints of PCNs and PCBs in the top layers of agricultural soils were used for determination of point sources of pollution for terrestrial ecosystems. The new idea based on the use of nona- and decachlorinated isomers fingerprint as an additional tool suitable for the identification of potential point sources of pollution with PCBs, seemed to be a capable tool to identify contamination of soil and ambient air related to former manufacturing and the use of highly chlorinated technical PCB preparations.     

Identification and characterization of the atmospheric emission of polychlorinated naphthalenes from electric arc furnaces

Electric arc furnaces (EAF) are well recognized as significant sources of dioxins. EAFs have also been speculated to be sources of polychlorinated naphthalenes (PCNs) due to the close correlation between dioxin and PCN formation. However, assessment on PCN emissions from EAFs has not been carried out. The primary aim of this preliminary study is to identify and characterize the atmospheric emission of PCNs from EAFs. In this preliminary study, stack gas samples from two typical EAFs with different scales (EAF-1, 160?t batch(-1); and EAF-2, 60?t batch(-1)) were collected by automatic isokinetic sampling technique, and PCN congeners in samples were analyzed by isotope dilution high-resolution gas chromatography combined with high-resolution mass spectrometry method. Emission concentrations of PCNs were 458 and 1,099?ng?m(-3) for EAF-1 and EAF-2, respectively. The emission factors of PCNs to air were 21.6 and 30.1?ng toxic equivalent t(-1) for EAF-1 and EAF-2, respectively, which suggested that EAF is an important source of PCN release. With regard to the characteristics of PCNs from EAFs, lower chlorinated homologues were dominant. The PCN congeners comprised of CN27/30, CN52/60, CN66/67, and CN73 were the most abundant congeners for tetra-, penta-, hexa-, and hepta-chlorinated homologues, respectively. EAFs were identified to be an important PCN source, and the obtained data are useful for developing a PCN inventory. The congener profiles of PCNs presented here might provide helpful information for identifying the specific sources of PCNs emitted from EAFs.     

Polychlorinated naphthalenes in urban soils: analysis,concentrations, and relation to other persistent organic pollutants

We determined the concentrations of 35 PCNs, 12 PCBs, and 20 PAHs in 49 urban topsoils under different land use (house garden, roadside grassland, alluvial grassland, park areas, industrial sites, agricultural sites) and in nine rural topsoils. The sums of concentrations of 35 PCNs (sigma35 PCNs) were <0.1-15.4 microg kg(-1) in urban soils and <0.1 to 0.82 microg kg(-1) in rural soils. The PCN, PCB, and PAH concentrations were highest at industrial sites and in house gardens. While rural soils receive PCNs, PCBs, and PAHs by common atmospheric deposition, there are site-specific sources of PCNs, PCBs, and PAHs for urban soils such as deposition of contaminated technogenic materials. The PCN, PCB, and PAH concentrations decreased from the central urban to the rural area. In the same order the contribution of lower chlorinated PCNs and PCBs increased because they are more volatile and subject to increased atmospheric transport. The PCNs 52+60, and 73 were more abundant in soil samples than in Halowax mixtures, indicating that combustion contributed to the PCN contamination of the soils.     

Indirect effect of nutrient accumulation intensified toxicity risk of metals in sediments from urban river network

The levels of metals in sediments of urban river ecosystems are crucial for aquatic environmental health and pollution assessment. Yet little is known about the interaction of nutrients with metals for environmental risks under contamination accumulation. Here, we combined hierarchical cluster, correlation, and principal component analysis with structural equation model (SEM) to investigate the pollution level, source, toxicity risk, and interaction associated with metals and nutrients in the sediments of a river network in a city area of East China. The results showed that the pollution associated with metals in sediments was rated as moderate degree of contamination load and medium-high toxicity risk in the middle and downstream of urban rivers based on contamination factor, pollution load index, and environmental toxicity quotient. The concentration of mercury (Hg) and zinc (Zn) showed a significant correlation with toxic risks, which had more contribution to toxicity than other metals in the study area. Organic nitrogen and organic pollution index showed heavily polluted sediments in south of the study area. Though correlation analysis indicated that nutrients and metals had different input zones from anthropogenic sources in the urban river network, SEM suggested that nutrient accumulation indirectly intensified toxicity risk of metals by 13.6% in sediments. Therefore, we suggested the combined consideration of metal toxicity risk with nutrient accumulation, which may provide a comprehensive understanding to identify sediment pollution.

Toxicity rate of metals in sediments from urban river network indirectly intensified by nutrients accumulation

     

Organic chlorine compounds in lake sediments. IV. Dioxins, furans and related chloroaromatic compounds

Polychlorodibenzo-p-dioxins (PCDDs), polychlorodibenzofurans (PCDFs), polychloronaphthalenes (PCNs) and coplanar PCBs were measured in surface sediments from 18 lake areas in Central Finland. Toxic 2, 3, 7, 8-substituted PCDD and PCDF congeners occurred at low levels (<20 − 230 pg/g dw). PCNs appeared at few ng/g (total PCNs) levels. Pulp mills or any other local sources could not be associated with the sedimented PCDDs, PCDFs and PCNs. Coplanar PCB congeners 77 and 105 (IUPAC Nr) were generally found at 20–550 pg/g levels. The most toxic congener 126 was measured (110 pg/g) only at one area near a local PCB leakage. Pulp mill originated aromatic chlorocompounds which coelute with PCDDs and PCDFs in clean up, probably alkyl polychlorobibenzyls (R-PCBBs) appeared at ng/g levels and showed a clear gradient dowstreams from pulp mill effluent points.     

PCBs, PCNs and PBDEs in sediments and mussels from Qingdao coastal sea in the frame of current circulations and influence of sewage sludge

Influence of current circulation and sewage sludge on spatial distributions of polychlorinated biphenyls (PCBs), polychlorinated naphthalenes (PCNs), and polybrominated diphenyl ethers (PBDEs) in sediments and mussels from the Qingdao coastal sea were investigated. Total concentrations of PCBs, PCNs and PBDEs in sediments ranged 6.5-32.9, 0.2-1.2, and 0.1-5.5 ngg(-1) dry wt, respectively. The maximum concentrations were all found near the Haibo River mouth, affected by sewage sludge input from the river. Under the current system in Jiaozhou Bay the organic pollutants were subject to deposit on the east side of the bay and trapped inside the bay. Sewage sludge was an important source of PCBs, PCNs and PBDEs in the bay and exponentially magnified the enrichment of PCBs. On the other hand, the congener profiles of PCBs in sediments outside the bay may signify an atmospheric source of PCBs. Total Concentrations of PCBs, PCNs and PBDEs in mussels were 61.4-88.6, 9.0, and 13.8 ngg(-1)lipid, respectively. Mussels enriched significantly PCBs, PCNs and PBDEs relative to the sediments. The total toxicity equivalent quantities (TEQs) of PCNs in mussels were generally lower than that of PCBs. The fluxes of the total PCBs and their TEQs have been decreased steadily since 1950s. The lower chlorinated/brominated congeners of PCNs and PBDEs may exhibit a greater tendency due to less lipophilic and thus a greater probability of being affected by the current circulation in the bay.     

Passive air monitoring of PCBs and PCNs across East Asia: a comprehensive congener evaluation for source characterization

A comprehensive congener specific evaluation of polychlorinated biphenyls (PCBs) and polychlorinated naphthalenes (PCNs) in the atmosphere was conducted across East Asia in spring 2008, applying polyurethane foam (PUF) disk passive air sampler (PAS) as monitoring device. Mean concentrations derived for Japan, China and Korea were 184 ± 24, 1100 ± 118, and 156 ± 20 pg m⁻³ for ∑₂₀₂ PCBs, and 9.5 ± 1.5, 61 ± 6, and 16 ± 2.4 pg m⁻³ for ∑₆₃ PCNs, respectively. Relative to reported data from 2004, the present results suggest that air PCBs concentrations have not changed much in Japan and Korea, while it has increased by one order of magnitude in China. From principal component analysis, combustion emerged highly culpable in contemporary emissions of both PCBs and PCNs across the East Asian sub-region. Another factor derived as important to air PCBs was re-emissions/volatilization. Signals from PCBs formulations were also picked, but their general importance was virtually consigned to the re-emissions/volatilization tendencies. On the contrary, counterpart PCNs formulations did not appear to contribute much to air PCNs.     

饮用水的有机锡问题及对策

有机锡类化合物对环境生态和人类有很强内分泌毒性.其主要来源包括有机锡产品的生产和消耗、生物和化学甲基化效应.当前饮用水日益受到有机锡污染的严重威胁,主要原因有水源水的有机锡污染、PVC管材稳定剂的渗出和管网生物甲基化作用.通过分析提出解决饮用水有机锡问题应从3方面考虑,一是采用紫外光解或化学氧化处理受污染水源水,破坏水中有机锡化合物并消除其毒性;二是加强PVC管材质量要求,尽量采用低毒管材;三是定期更换给水管段以减少管网中生物甲基化导致的二次污染.     

Atmospheric emission of polychlorinated naphthalenes from iron ore sintering processes

Iron ore sintering processes constitute significant sources of dioxins, and studies have confirmed a close correlation between polychlorinated naphthalenes (PCNs) and dioxin formation. Thus, iron ore sintering processes are thought to be a potential source of PCNs, although intensive investigations on PCN emissions from sintering processes have not been carried out. Therefore, the aim of the present study was to qualify and quantify PCN emissions from nine sintering plants operating on different industrial scales. PCN concentrations ranged from 3 to 983 ng m⁻³ (0.4-23.3 pg TEQ_PCN m⁻³) and emission factors ranged from 14 to 1749 μg t⁻¹ (0.5-41.5 ng TEQ_PCN t⁻¹), with a geometric mean of 84 μg t⁻¹ (2.1 ng TEQ_PCN t⁻¹). The estimated annual emission of PCNs from sintering processes in China was 1390 mg TEQ_PCN. These figures will assist in the development of a PCN emissions inventory. Regarding emission characteristics, PCNs mainly comprised low-chlorinated homologs. The ratios of several characteristic PCN congeners were also measured and compared with those from other sources. Taken together, these results may provide useful information for identifying the sources of PCNs produced by iron ore sintering processes.     

Chlorinated naphthalene formation from the oxidation of dichlorophenols

Polychlorinated naphthalenes (PCNs) formed along with dibenzo-p-dioxin and dibenzofuran products in the slow combustion of dichlorophenols (DCPs) at 600 degrees C were identified. Each DCP reactant produced a unique set of PCN products. Major PCN congeners observed in the experiments were consistent with products predicted from a mechanism involving an intermediate formed by ortho-ortho carbon coupling of phenoxy radicals; polychlorinated dibenzofurans (PCDFs) are formed from the same intermediate. Tautomerization of the intermediate and H2O elimination produces PCDFs; alternatively, CO elimination to form dihydrofulvalene and fusion produces naphthalenes. Only trace amounts of tetrachloronaphthalene congeners were formed, suggesting that the preferred PCN formation pathways from chlorinated phenols involve loss of chlorine. 3,4-DCP produced the largest yields of PCDF and PCN products with two or more chlorine substituents. 2,6-DCP did not produce tri- or tetra-chlorinated PCDF or PCN congeners. It did produce 1,8-DCN, however, which could not be explained.     

Apportionment of TEQs from four major dioxin sources in Japan on the basis of five indicative congeners

The major sources of dioxins (polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs), and dioxin-like polychlorinated biphenyls (DL-PCBs)) in the environment in Japan have been considered to be combustion by-products, pentachlorophenol (PCP) formulations, chlornitrofen (CNP, 4-nitrophenyl-2,4,6-trichlorophenyl ether) formulations, and PCB products. Data on PCDDs, PCDFs and DL-PCBs from the four sources were analyzed, and indicative congeners whose concentrations were highly correlated with WHO-2006 toxic equivalencies (TEQs) were identified for each source sample. The indicative congeners for combustion by-products, PCP formulations, and CNP formulations were 2,3,4,7,8-pentachlorodibenzofuran, 1,2,3,4,6,7,8-heptachlorodibenzo-p-dioxin, and 1,2,3,7,8-pentachlorodibenzo-p-dioxin, respectively; for PCB products, the indicative congeners were IUPAC Nos. #126- and #105-pentachlorobiphenyls. Moreover, using the data on PCDDs, PCDFs and DL-PCBs, we developed a set of equations for estimating the apportionment of TEQs from the four sources by using only the concentrations of the above-mentioned five indicative congeners. The equations were used along with the analysis results of different types of environmental samples collected from Japan, to determine the TEQ contributions of the four sources. The obtained values of TEQ contributions seemed to be reasonable. The estimation method was developed by using the data on major dioxin sources in Japan, and therefore, it is generally adaptable to environmental samples from any part of Japan. The method may be usable for regions outside Japan if source identification is carried out and the estimation equations are modified appropriately.     

Polychlorinated naphthalenes in sediments from the industrial region of Bitterfeld

Bitterfeld (Germany) was a major site of chemical production in the former German Democratic Republic with chloralkali electrolysis as the basic process. Effluents were dumped via the creek Spittelwasser into the rivers Mulde and Elbe. Despite the fact that the chloralkali industry is known as a possible source of polychlorinated naphthalenes (PCNs), to date no data about PCN pollution in the region of Bitterfeld and downstream regions are available. Therefore, sediments of the creek Spittelwasser were isomer-specifically analysed for penta-, hexa- and heptachlorinated naphthalenes using GC/MS. Concentrations of 880, 543 and 1120 ng/g dry weight were found, respectively. The isomer pattern suggests chloralkali industry as the major source of PCN contamination. Because of their toxicological relevance we suggest to include PCNs into monitoring and risk assessment programs of the rivers Mulde and Elbe downstream of Bitterfeld.     

Enzymatic synthesis of bromo- and chlorocarbazoles and elucidation of their structures by molecular modeling

3-Chlorocarbazole, 3,6-dichlorocarbazole, dibromocarbazole, and 1,3,6,8-tetrabromocarbazole are emerging environmental contaminants which have been detected recently in water, sediment, and soil samples. However, their sources and occurrence have not been explained. Here, we report an enzymatic synthesis of bromo- and chlorocarbazoles by chloroperoxidase from Caldariomyces fumago in water. Density functional theory (DFT) method was used to predict the most stable products. Carbazole and chloroperoxidase were assayed in vitro in the presence of hydrogen peroxide, bromide, and chloride ions in different substrate ratio treatments against constant and varying enzyme concentrations. Halogenated carbazoles formed were identified by high-resolution gas chromatography coupled to mass spectrometry. In all treatments, bromination and chlorination took place, but the composition and concentration of compounds formed varied from one treatment to another. Mono-, di-, tri-, and tetra-substituted bromo- and chlorocarbazoles which include the reported environmental contaminants were synthesized. 3-Substituted and 3,6-substituted congeners were relatively higher in concentration. Enzyme concentration did not favor preferential formation of any of the compounds synthesized. However, their synthesis was influenced by halide concentration. Congeners with bromine and chlorine at position of C-3, C-3,6, C-1,3,6, and C-1,3,6,8 were calculated as the stable intermediate sigma complexes by DFT method. Regioselectivity in halogenation is discussed and hypothesis of the likely stable products in the environment explained. This study provides evidence that bromo- and chlorocarbazoles reported previously can be formed enzymatically in the environment, demonstrating the need to consider aromatic pollutants transformation and their potential toxicity enhancements in the management of water pollution and contaminated sites.     

Development and calibration of epiphytic lichens as saltfall biomonitors--dry-deposition modelling

Blubber collected from beluga whales and ringed seals during subsistence hunts in the southern Baffin Island region of the Canadian Arctic were analysed for polychlorinated naphthalenes and eight planar PCB congeners (mono-ortho PCBs: 105, 114, 118 and 156; non-ortho PCBs: 77, 81, 126, 169). SigmaPCN (3-7 Cl) concentrations in blubber ranged from 35.9-383 pg/g (lipid weight; lw) in beluga and 35.4-71.3 pg/g (lw) in ringed seal. These represent the first measurements of PCNs in marine mammals in the Canadian Arctic, mammals which are an important part of the traditional diet of the indigenous population. SigmaCoplPCB concentrations were much higher, ranging from 15.5-317 ng/g (lw) in beluga whale blubber and 16.5-40.9 ng/g (lw) in ringed seal blubber. PCNs and coplanar PCBs both exhibit dioxin-like toxicity. Although average sigmaPCN concentrations were less than 1% of sigmaCoplPCBs, PCNs contribute up to 11% of TEQ relative to the coplanar PCBs based on TEFs determined by H4IIE enzyme assays.     

Polychlorinated naphthalenes (PCNs) in Irish foods: Occurrence and human dietary exposure

The concentrations of selected polychlorinated naphthalene (PCN) congeners (PCNs 52, 53, 66/67, 68, 69, 71/72, 73, 74 and 75) were determined in 100 commonly consumed foods, in the first study on occurrence of these contaminants in the Republic of Ireland. Congener selection was based on current knowledge on PCN occurrence and toxicology, and the availability of reliable reference standards. The determinations were carried out using validated analytical methodology based on 13C10 labelled internal standardisation and measurement by HRGC-HRMS. The results showed PCN occurrence in the majority of studied foods--milk, fish, dairy and meat products, eggs, animal fat, shellfish, offal, vegetables, cereal products, etc. ranging from 0.09 ng kg(-1) whole weight for milk to 59.3 ng kg(-1) whole weight for fish, for the sum of the measured PCNs. The most frequently detected congeners were PCNs 66/67, PCN 52, and PCN 73. The highest concentrations were observed in fish, which generally showed congener profiles that reflect some commercial mixtures. The data compares well with other recently reported data for Western Europe. The dioxin-like toxicity (PCN TEQ) associated with these concentrations is lower than that reported for chlorinated dioxins or PCBs in food from Ireland. The dietary exposure of the Irish adult population to PCNs was calculated following a probabilistic approach, using the full dataset of occurrence and current consumption data. The estimates of dietary intakes at approximately 0.14 pg TEQ kg bw(-1) month(-1) for adults on an average diet, reflects the relatively lower occurrence levels.     

Certain organochlorine and organobromine contaminants in Swedish human milk in perspective of past 20-30 years

The investigations of organochlorine compounds in breast milk from women living in the Stockholm region started in 1967. The present study summarises the investigations of polychlorinated biphenyls (PCBs), naphthalenes (PCNs), dibenzo-p-dioxins (PCDDs), dibenzofurans (PCDFs), polybrominated diphenyl ethers (PBDEs) and pesticides (DDT, DDE, hexachlorobenzene, dieldrin) as well as methylsulfonyl metabolites of PCBs and DDE in human milk sampled during different periods up to 1997. During the course of 20-30 yr the levels of organochlorine compounds in human milk have decreased to various extent. A decrease to the half of the original concentration was attained in the range of 4-17 yr periods. On the contrary to the organochlorine compounds, the concentrations of PBDEs have increased during the period 1972-1997, indicating a doubling of the levels by 5 yr. The levels reflect the environmental contamination and background levels in the population. The accumulation and ongoing increase in the levels of PBDEs calls for immediate measures to stop the environmental pollution and human exposure to PBDEs.     

Relative importance of polychlorinated naphthalenes compared to dioxins, and polychlorinated biphenyls in human serum from Korea: Contribution to TEQs and potential sources

Polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs), and polychlorinated biphenyls (PCBs) in human have been studied extensively; however, polychlorinated naphthalenes (PCNs) have been studied less widely. The mean concentrations of PCNs, PCDDs, PCDFs, and PCBs in 61 healthy human volunteers were 2170 pg/g lipid, 452 pg/g lipid, 116 pg/g lipid, and 120 ng/g lipid respectively, and the mean toxic equivalents (TEQs) contributed by PCNs, PCDDs, PCDFs, and PCBs were 5.88, 5.22, 5.48, and 5.33 pg/g lipid, respectively. PCNs contributed to 26.8% of the total TEQs. 1,2,3,7,8-PeCDD, 2,3,4,7,8-PeCDF, PCB126, and hepta-CN-73 accounted for >62% of the total TEQs in the human serum samples. The overall serum PCN homologue profiles of all subjects were dominated by tetra- and penta-CN homologues, and the most predominant individual congener was hepta-CN-73, which contributed 17.5% of the total serum PCN concentration. Enrichment of hepta-CN-73 in the human serum samples might be due to contributors from combustion sources.